Atomic coordination environment engineering of bimetallic alloy nanostructures for efficient ammonia electrosynthesis from nitrate.

Electrochemical nitrate reduction reaction (NO3RR) to ammonia has been regarded as a promising strategy to balance the global nitrogen cycle. However, it still suffers from poor Faradaic efficiency (FE) and limited yield rate for ammonia production on heterogeneous electrocatalysts, especially in neutral solutions. Herein, we report one-pot synthesis of ultrathin nanosheet-assembled RuFe nanoflowers with low-coordinated Ru sites to enhance NO3RR performances in neutral electrolyte. Significantly, RuFe nanoflowers exhibit outstanding ammonia FE of 92.9% and yield rate of 38.68 mg h-1 mgcat-1 (64.47 mg h-1 mgRu-1) at -0.30 and -0.65 V (vs. reversible hydrogen electrode), respectively. Experimental studies and theoretical calculations reveal that RuFe nanoflowers with low-coordinated Ru sites are highly electroactive with an increased d-band center to guarantee efficient electron transfer, leading to low energy barriers of nitrate reduction. The demonstration of rechargeable zinc-nitrate batteries with large-specific capacity using RuFe nanoflowers indicates their great potential in next-generation electrochemical energy systems.

Constructing molecule-metal relay catalysis over heterophase metallene for high-performance rechargeable zinc-nitrate/ethanol batteries.

Zinc-nitrate batteries can integrate energy supply, ammonia electrosynthesis, and sewage disposal into one electrochemical device. However, current zinc-nitrate batteries still severely suffer from the limited energy density and poor rechargeability. Here, we report the synthesis of tetraphenylporphyrin (tpp)-modified heterophase (amorphous/crystalline) rhodium-copper alloy metallenes (RhCu M-tpp). Using RhCu M-tpp as a bifunctional catalyst for nitrate reduction reaction (NO3RR) and ethanol oxidation reaction in neutral solution, a highly rechargeable and low-overpotential zinc-nitrate/ethanol battery is successfully constructed, which exhibits outstanding energy density of 117364.6 Wh kg-1cat, superior rate capability, excellent cycling stability of ~400 cycles, and potential ammonium acetate production. Ex/in situ experimental studies and theoretical calculations reveal that there is a molecule-metal relay catalysis in NO3RR over RhCu M-tpp that significantly facilitates the ammonia selectivity and reaction kinetics via a low energy barrier pathway. This work provides an effective design strategy of multifunctional metal-based catalysts toward the high-performance zinc-based hybrid energy systems.

Recycling spent LiNi1-x-yMnxCoyO2 cathodes to bifunctional NiMnCo catalysts for zinc-air batteries.

SignificanceIn recent years, lithium-ion batteries (LIBs) have been widely applied in electric vehicles as energy storage devices. However, it is a great challenge to deal with the large number of spent LIBs. In this work, we employ a rapid thermal radiation method to convert the spent LIBs into highly efficient bifunctional NiMnCo-activated carbon (NiMnCo-AC) catalysts for zinc-air batteries (ZABs). The obtained NiMnCo-AC catalyst shows excellent electrochemical performance in ZABs due to the unique core-shell structure, with face-centered cubic Ni in the core and spinel NiMnCoO4 in the shell. This work provides an economical and environment-friendly approach to recycling the spent LIBs and converting them into novel energy storage devices.

Boosting the reaction kinetics in aprotic lithium-carbon dioxide batteries with unconventional phase metal nanomaterials.

Given the high energy density and eco-friendly characteristics, lithium-carbon dioxide (Li-CO2) batteries have been considered to be a next-generation energy technology to promote carbon neutral and space exploration. However, Li-CO2 batteries suffer from sluggish reaction kinetics, causing large overpotential and poor energy efficiency. Here, we observe enhanced reaction kinetics in aprotic Li-CO2 batteries with unconventional phase 4H/face-centered cubic (fcc) iridium (Ir) nanostructures grown on gold template. Significantly, 4H/fcc Ir exhibits superior electrochemical performance over fcc Ir in facilitating the round-trip reaction kinetics of Li+-mediated CO2 reduction and evolution, achieving a low charge plateau below 3.61 V and high energy efficiency of 83.8%. Ex situ/in situ studies and theoretical calculations reveal that the boosted reaction kinetics arises from the highly reversible generation of amorphous/low-crystalline discharge products on 4H/fcc Ir via the Ir-O coupling. The demonstration of flexible Li-CO2 pouch cells with 4H/fcc Ir suggests the feasibility of using unconventional phase nanomaterials in practical scenarios.

Electron Localization in Rationally Designed Pt1Pd Single-Atom Alloy Catalyst Enables High-Performance Li-O2 Batteries.

Li-O2 batteries (LOBs) are considered as one of the most promising energy storage devices due to their ultrahigh theoretical energy density, yet they face the critical issues of sluggish cathode redox kinetics during the discharge and charge processes. Here we report a direct synthetic strategy to fabricate a single-atom alloy catalyst in which single-atom Pt is precisely dispersed in ultrathin Pd hexagonal nanoplates (Pt1Pd). The LOB with the Pt1Pd cathode demonstrates an ultralow overpotential of 0.69 V at 0.5 A g-1 and negligible activity loss over 600 h. Density functional theory calculations show that Pt1Pd can promote the activation of the O2/Li2O2 redox couple due to the electron localization caused by the single Pt atom, thereby lowering the energy barriers for the oxygen reduction and oxygen evolution reactions. Our strategy for designing single-atom alloy cathodic catalysts can address the sluggish oxygen redox kinetics in LOBs and other energy storage/conversion devices.

Oxygen-Bridged Long-Range Dual Sites Boost Ethanol Electrooxidation by Facilitating C-C Bond Cleavage.

Optimizing the interatomic distance of dual sites to realize C-C bond breaking of ethanol is critical for the commercialization of direct ethanol fuel cells. Herein, the concept of holding long-range dual sites is proposed to weaken the reaction barrier of C-C cleavage during the ethanol oxidation reaction (EOR). The obtained long-range Rh-O-Pt dual sites achieve a high current density of 7.43 mA/cm2 toward EOR, which is 13.3 times that of Pt/C, as well as remarkable stability. Electrochemical in situ Fourier transform infrared spectroscopy indicates that long-range Rh-O-Pt dual sites can increase the selectivity of C1 products and suppress the generation of a CO intermediate. Theoretical calculations further disclose that redistribution of the surface-localized electron around Rh-O-Pt can promote direct oxidation of -OH, accelerating C-C bond cleavage. This work provides a promising strategy for designing oxygen-bridged long-range dual sites to tune the activity and selectivity of complicated catalytic reactions.

Charge-Separated Pdδ--Cuδ+ Atom Pairs Promote CO2 Reduction to C2.

Positively charged Cu sites have been confirmed to significantly promote the production of multicarbon (C2) products from an electrochemical CO2 reduction reaction (CO2RR). However, the positively charged Cu has difficulty in existing under a strong negative bias. In this work, we design a Pdδ--Cu3N catalyst containing charge-separated Pdδ--Cuδ+ atom pair that can stabilize the Cuδ+ sites. In situ characterizations and density functional theory reveal that the first reported negatively charged Pdδ- sites exhibited a superior CO binding capacity together with the adjacent Cuδ+ sites, synergistically promoting the CO dimerization process to produce C2 products. As a result, we achieve a 14-fold increase in the C2 product Faradaic efficiency (FE) on Pdδ--Cu3N, from 5.6% to 78.2%. This work provides a new strategy for synthesizing negative valence atom-pair catalysts and an atomic-level modulation approach of unstable Cuδ+ sites in the CO2RR.

Controlled Synthesis of Unconventional Phase Alloy Nanobranches for Highly Selective Electrocatalytic Nitrite Reduction to Ammonia.

The controlled synthesis of metal nanomaterials with unconventional phases is of significant importance to develop high-performance catalysts for various applications. However, it remains challenging to modulate the atomic arrangements of metal nanomaterials, especially the alloy nanostructures that involve different metals with distinct redox potentials. Here we report the general one-pot synthesis of IrNi, IrRhNi and IrFeNi alloy nanobranches with unconventional hexagonal close-packed (hcp) phase. Notably, the as-synthesized hcp IrNi nanobranches demonstrate excellent catalytic performance towards electrochemical nitrite reduction reaction (NO2RR), with superior NH3 Faradaic efficiency and yield rate of 98.2 % and 34.6 mg h-1 mgcat -1 (75.5 mg h-1 mgIr -1) at 0 and -0.1 V (vs reversible hydrogen electrode), respectively. Ex/in situ characterizations and theoretical calculations reveal that the Ir-Ni interactions within hcp IrNi alloy improve electron transfer to benefit both nitrite activation and active hydrogen generation, leading to a stronger reaction trend of NO2RR by greatly reducing energy barriers of rate-determining step.

Controllable Conversion of Platinum Nanoparticles to Single Atoms in Pt/CeO2 by Laser Ablation for Efficient CO Oxidation.

Downsizing metal nanoparticles to single atoms (monoatomization of nanoparticles) has been actively pursued to maximize the metal utilization of noble-metal-based catalysts and regenerate the activity of agglomerated metal catalysts. However, precise control of monoatomization to optimize the catalytic performance remains a great challenge. Herein, we developed a laser ablation strategy to achieve the accurate regulation of Pt nanoparticles (PtNP) to Pt single atoms (Pt1) conversion on CeO2. Owing to the excellent tunability of input laser energy, the proportion of Pt1 versus total Pt on CeO2 can be precisely controlled from 0 to 100% by setting different laser powers and irradiation times. The obtained Pt1PtNP/CeO2 catalyst with approximately 19% Pt1 and 81% PtNP exhibited much-enhanced CO oxidation activity than Pt1/CeO2, PtNP/CeO2, and other Pt1PtNP/CeO2 catalysts. Density functional theory (DFT) calculations showed that PtNP was the major active center for CO oxidation, while Pt1 changed the chemical potential of lattice oxygen on CeO2, which decreased the energy barrier required for CO oxidation by lattice oxygen and resulted in an overall performance improvement. This work provides a reliable strategy to redisperse metal nanoparticles for designing catalysts with various single-atom/nanoparticle ratios from a top-down path and valuable insights into understanding the synergistic effect of nano-single-atom catalysts.

MOF-Derived Ru1Zr1/Co Dual-Atomic-Site Catalyst with Promoted Performance for Fischer-Tropsch Synthesis.

Cobalt-based catalysts have been widely used for Fischer-Tropsch synthesis (FTS) in industry; however, achieving rational catalyst design at the atomic level and thereby a higher activity and more long-chain-hydrocarbon products simultaneously remain an attractive and difficult challenge. The dual-atomic-site catalysts with unique electronic and geometric interface interactions offer a great opportunity for exploiting advanced FTS catalysts with improved performance. Herein, we designed a Ru1Zr1/Co catalyst with Ru and Zr dual atomic sites on the Co nanoparticle (NP) surface through a metal-organic-framework-mediated synthesis strategy which presents greatly enhanced FTS activity (high turnover frequency of 3.8 × 10-2 s-1 at 200 °C) and C5+ selectivity (80.7%). Control experiments presented a synergic effect between Ru and Zr single-atom site on Co NPs. Further density functional theory calculations of the chain growth process from C1 to C5 revealed that the designed Ru/Zr dual sites remarkably lower the rate-limiting barriers due to the significantly weakened C-O bond and promote the chain growth processes, resulting in the greatly boosted FTS performance. Therefore, our work demonstrates the effectiveness of dual-atomic-site design in promoting the FTS performance and provides new opportunities for developing efficient industrial catalysts.

Inserting Single-Atom Zn by Tannic Acid Confinement To Regulate the Selectivity of Pd Nanocatalysts for Hydrogenation Reactions.

Precisely controlling the selectivity of nanocatalysts has always been a hot topic in heterogeneous catalysis but remains difficult owing to their complex and inhomogeneous catalytic sites. Herein, an effective strategy to regulate the chemoselectivity of Pd nanocatalysts for selective hydrogenation reactions by inserting single-atom Zn into Pd nanoparticles is reported. Taking advantage of the tannic acid coating-confinement strategy, small-sized Pd nanoparticles with inserted single-atom Zn are obtained on the O-doped carbon-coated alumina. Compared with the pure Pd nanocatalyst, the Pd nanocatalyst with single-atom Zn insertion exhibits prominent selectivity for the hydrogenation of p-iodonitrobenzene to afford the hydrodeiodination product instead of nitro hydrogenation ones. Further computational studies reveal that the single-atom Zn on Pd nanoparticles strengthens the adsorption of the nitro group to avoid its reduction and increases the d-band center of Pd atoms to facilitate the reduction of the iodo group, which leads to enhanced selectivity. This work provides new guidelines to tune the selectivity of nanocatalysts with guest single-atom sites.

Regulating the FeN4 Moiety by Constructing Fe-Mo Dual-Metal Atom Sites for Efficient Electrochemical Oxygen Reduction.

An Fe-N-C catalyst with an FeN4 active moiety has gained ever-increasing attention for the oxygen reduction reaction (ORR); however, the catalytic performance is sluggish in acidic solutions and the regulation is still a challenge. Herein, Fe-Mo dual-metal sites were constructed to tune the ORR activity of a mononuclear Fe site embedded in porous nitrogen-doped carbon. The cracking of O-O bonds is much more facile on the Fe-Mo atomic pair site due to the preferred bridge-cis adsorption model of oxygen molecules. The downshift of the Fe d band center when an Mo atom is introduced to the FeNx configuration optimizes the absorption-desorption behavior of ORR intermediates in the FeMoN6 active moiety, thus boosting the catalytic performance. The construction of dual-metal atom sites to regulate the catalytically active moiety paves the way for boosting the electrocatalytic performance of other similar non-precious-metal catalysts.

Synergistic Fe-Se Atom Pairs as Bifunctional Oxygen Electrocatalysts Boost Low-Temperature Rechargeable Zn-Air Battery.

Herein, we successfully construct bifunctional electrocatalysts by synthesizing atomically dispersed Fe-Se atom pairs supported on N-doped carbon (Fe-Se/NC). The obtained Fe-Se/NC shows a noteworthy bifunctional oxygen catalytic performance with a low potential difference of 0.698 V, far superior to that of reported Fe-based single-atom catalysts. The theoretical calculations reveal that p-d orbital hybridization around the Fe-Se atom pairs leads to remarkably asymmetrical polarized charge distributions. Fe-Se/NC based solid-state rechargeable Zn-air batteries (ZABs-Fe-Se/NC) present stable charge/discharge of 200 h (1090 cycles) at 20 mA cm-2 at 25 °C, which is 6.9 times of ZABs-Pt/C+Ir/C. At extremely low temperature of -40 °C, ZABs-Fe-Se/NC displays an ultra-robust cycling performance of 741 h (4041 cycles) at 1 mA cm-2 , which is about 11.7 times of ZABs-Pt/C+Ir/C. More importantly, ZABs-Fe-Se/NC could be operated for 133 h (725 cycles) even at 5 mA cm-2 at -40 °C.

Continuous Modulation of Electrocatalytic Oxygen Reduction Activities of Single-Atom Catalysts through p-n Junction Rectification.

Fine-tuning single-atom catalysts (SACs) to surpass their activity limit remains challenging at their atomic scale. Herein, we exploit p-type semiconducting character of SACs having a metal center coordinated to nitrogen donors (MeNx ) and rectify their local charge density by an n-type semiconductor support. With iron phthalocyanine (FePc) as a model SAC, introducing an n-type gallium monosulfide that features a low work function generates a space-charged region across the junction interface, and causes distortion of the FeN4 moiety and spin-state transition in the FeII center. This catalyst shows an over two-fold higher specific oxygen-reduction activity than that of pristine FePc. We further employ three other n-type metal chalcogenides of varying work function as supports, and discover a linear correlation between the activities of the supported FeN4 and the rectification degrees, which clearly indicates that SACs can be continuously tuned by this rectification strategy.

Atomic Replacement of PtNi Nanoalloys within Zn-ZIF-8 for the Fabrication of a Multisite CO2 Reduction Electrocatalyst.

Exploring the transformation/interconversion pathways of catalytic active metal species (single atoms, clusters, nanoparticles) on a support is crucial for the fabrication of high-efficiency catalysts, the investigation of how catalysts are deactivated, and the regeneration of spent catalysts. Sintering and redispersion represent the two main transformation modes for metal active components in heterogeneous catalysts. Herein, we established a novel solid-state atomic replacement transformation for metal catalysts, through which metal atoms exchanged between single atoms and nanoalloys to form a new set of nanoalloys and single atoms. Specifically, we found that the Ni of the PtNi nanoalloy and the Zn of the ZIF-8-derived Zn1 on nitrogen-doped carbon (Zn1-CN) experienced metal interchange to produce PtZn nanocrystals and Ni single atoms (Ni1-CN) at high temperature. The elemental migration and chemical bond evolution during the atomic replacement displayed a Ni and Zn mutual migration feature. Density functional theory calculations revealed that the atomic replacement was realized by endothermically stretching Zn from the CN support into the nanoalloy and exothermically trapping Ni with defects on the CN support. Owing to the synergistic effect of the PtZn nanocrystal and Ni1-CN, the obtained (PtZn)n/Ni1-CN multisite catalyst showed a lower energy barrier of CO2 protonation and CO desorption than that of the reference catalysts in the CO2 reduction reaction (CO2RR), resulting in a much enhanced CO2RR catalytic performance. This unique atomic replacement transformation was also applicable to other metal alloys such as PtPd.

Electrical Pulse Induced One-step Formation of Atomically Dispersed Pt on Oxide Clusters for Ultra-Low-Temperature Zinc-Air Battery.

Atomically dispersed sites anchored on small oxide clusters are attractive new catalytic materials. Herein, we demonstrate an electrical pulse approach to synthesize atomically dispersed Pt on various oxide clusters in one step with nitrogen-doped carbon as the support (Pt1 -MOx /CN). As a proof-of-concept application, Pt1 -FeOx /CN is shown to exhibit high activity for oxygen reduction reaction (ORR) with a half-wave potential of 0.94 V vs RHE, in contrast to the poor catalytic performance of atomically dispersed Pt on large Fe2 O3 nanoparticles. Our work has revealed that, by tuning the size of the iron oxide down to the cluster regime, an optimal OH* adsorption strength for ORR is achieved on Pt1 -FeOx /CN due to the regulation of Pt-O bonds. The unique structure and high catalytic performance of Pt1 -FeOx /CN enable the Zinc-Air batteries an excellent performance at ultralow temperature of -40 °C with a high peak power density of 45.1 mW cm-2 and remarkable cycling stability up to 120 h.

Template-Guided Regioselective Encaging of Platinum Single Atoms into Y Zeolite: Enhanced Selectivity in Semihydrogenation and Resistance to Poisoning.

It is challenging to establish single metal atoms with a uniform coordination environment at targeted sites of a zeolite. In this study, single platinum atoms were selectively encaged in the six-membered rings of sodalite (SOD) cages within Y zeolite using a template-guiding strategy. During the in situ synthesis process, template molecules were designed to occupy supercages and thereby force coordinated platinum species into SOD cages. Subsequent control of the post-treatment conditions yielded the Y zeolite with selectively encaged single platinum atoms, denoted Pt@Y-SOD. The Pt@Y-SOD catalyst had good stability and excellent catalytic selectivity in the semihydrogenation reaction, and it exhibited interesting thiophene and carbon monoxide resistance in this transformation because interactions with these poisons are weakened by the configuration of the encaged single platinum atoms.

Phosphorus Tailors the d-Band Center of Copper Atomic Sites for Efficient CO2 Photoreduction under Visible-Light Irradiation.

Photoreduction of CO2 into solar fuels has received great interest, but suffers from low catalytic efficiency and poor selectivity. Herein, two single-Cu-atom catalysts with unique Cu configurations in phosphorus-doped carbon nitride (PCN), namely, Cu1 N3 @PCN and Cu1 P3 @PCN were fabricated via selective phosphidation, and tested in visible light-driven CO2 reduction by H2 O without sacrificial agents. Cu1 N3 @PCN was exclusively active for CO production with a rate of 49.8 µmolCO gcat -1 h-1 , outperforming most polymeric carbon nitride (C3 N4 ) based catalysts, while Cu1 P3 @PCN preferably yielded H2 . Experimental and theoretical analysis suggested that doping P in C3 N4 by replacing a corner C atom upshifted the d-band center of Cu in Cu1 N3 @PCN close to the Fermi level, which boosted the adsorption and activation of CO2 on Cu1 N3 , making Cu1 N3 @PCN efficiently convert CO2 to CO. In contrast, Cu1 P3 @PCN with a much lower Cu 3d electron energy exhibited negligible CO2 adsorption, thereby preferring H2 formation via photocatalytic H2 O splitting.

p-d Orbital Hybridization Induced by a Monodispersed Ga Site on a Pt3 Mn Nanocatalyst Boosts Ethanol Electrooxidation.

Constructing monodispersed metal sites in heterocatalysis is an efficient strategy to boost their catalytic performance. Herein, a new strategy using monodispersed metal sites to tailor Pt-based nanocatalysts is addressed by engineering unconventional p-d orbital hybridization. Thus, monodispersed Ga on Pt3 Mn nanocrystals (Ga-O-Pt3 Mn) with high-indexed facets was constructed for the first time to drive ethanol electrooxidation reaction (EOR). Strikingly, the Ga-O-Pt3 Mn nanocatalyst shows an enhanced EOR performance with achieving 8.41 times of specific activity than that of Pt/C. The electrochemical in situ Fourier transform infrared spectroscopy results and theoretical calculations disclose that the Ga-O-Pt3 Mn nanocatalyst featuring an unconventional p-d orbital hybridization not only promote the C-C bond-breaking and rapid oxidation of -OH of ethanol, but also inhibit the generation of poisonous CO intermediate species. This work discloses a promising strategy to construct a novel nanocatalysts tailored by monodispersed metal site as efficient fuel cell catalysts.

Atomically Dispersed Pt-N3C1 Sites Enabling Efficient and Selective Electrocatalytic C-C Bond Cleavage in Lignin Models under Ambient Conditions.

Selective cleavage of C-C linkages is the key and a challenge for lignin degradation to harvest value-added aromatic compounds. To this end, electrocatalytic oxidation presents a promising technique by virtue of mild reaction conditions and strong sustainability. However, the existing electrocatalysts (traditional bulk metal and metal oxides) for C-C bond oxidative cleavage suffer from poor selectivity and low product yields. We show for the first time that atomically dispersed Pt-N3C1 sites planted on nitrogen-doped carbon nanotubes (Pt1/N-CNTs), constructed via a stepwise polymerization-carbonization-electrostatic adsorption strategy, are highly active and selective toward Cα-Cß bond cleavage in ß-O-4 model compounds under ambient conditions. Pt1/N-CNTs exhibits 99% substrate conversion with 81% yield of benzaldehyde, which is exceptional and unprecedented compared with previously reported electrocatalysts. Moreover, Pt1/N-CNTs using only 0.41 wt % Pt achieved a much higher benzaldehyde yield than those of the state-of-the-art bulk Pt electrode (100 wt % Pt) and commercial Pt/C catalyst (20 wt % Pt). Systematic experimental investigation together with density functional theory (DFT) calculation suggests that the superior performance of Pt1/N-CNTs arises from the atomically dispersed Pt-N3C1 sites facilitating the formation of a key Cß radical intermediate, further inducing a radical/radical cross-coupling path to break the Cα-Cß bond. This work opens up opportunities in lignin valorization via a green and sustainable electrochemical route with ultralow noble metal usage.