Applicability assessment of empty fruit bunches from palm oil mills for use as bio-solid refuse fuels.

Palm kernel shells (PKS), empty fruit bunches (EFB), and trunks are by-products of the palm oil industry and form approximately 50 wt % of fresh fruit bunch (FFB). In particular, EFB accounts for approximately 20 wt % of FFB. Although large amounts of EFB are generated from palm oil mills every year in Indonesia and Malaysia, EFB is treated as waste because commercial technologies for thermo-chemical conversion of EFB into renewable energy are still under development. A robust conversion method can transform EFB into an appealing renewable energy source. In order to secure this renewable energy source, Korea can import EFB as biomass. This paper investigates literature on the status of utilization of EFB, by-products from palm oil mills in order to identify the best available technological process to use EFB as bio-solid refuse fuels (SRF). Meanwhile, physico-chemical analyses (proximate, elemental, and calorific value analyses), biomass and heavy metal content were measured in order to assess whether EFB would be suitable for use as a bio-SRF, in accordance with the Korean quality standard for SRF. According to the analysis results, EFB showed applicability to use as bio-SRF; main analysis results - moisture (9.63 wt %), ash (5.94 wt %), biomass content (97.82 wt %) and calorific value (3668 kcal kg).

Effect analysis on waste recycling by introducing a new policy, "Environmental Assessment of Recycling," for establishment of the ESG management system in the Republic of Korea.

To move away from linear system mining-manufacture-production-disposal, most countries have been trying to establish a circular economy, by reusing waste as resources. Responding to this paradigm change, the Ministry of Environment of Korea amended the Wastes Control Act in the 2010s. To increase the recycling rate in Korea, the environmental assessment of recycling (EAR) has been introduced to improve the Wastes Control Act. The whole process of new recycling technologies can be assessed in terms of environmental or technical aspects by assessment institutes of the EAR. Finally, the governmental research institute can approve of an application case, which proves environmental friendliness, even if the technology is not defined in the current act. Recently, 17 companies have been coassessed and approved to recycle steel codes in waste tires as resources for iron smelting via assessments of the whole process, such as environmental analysis and quality assessment. The EAR has been enforcing recycling materials for six years, and the total profit of the companies that were approved was estimated to be approximately 55 million USD. However, many amendments to the EAR continue to be requested by stakeholders. In this study, the effect of the EAR was evaluated, and additional tasks were found to enhance the EAR. Integr Environ Assess Manag 2024;00:1-13. © 2024 SETAC.

Applicability assessment of a plasma melting technology for a fly ash recycling system in the Republic of Korea.

ABSTRACTThe Ministry of Environment of Korea has proposed a ban on landfill disposal of municipal solid waste (MSW) from 2026. Thus, it is inferred that the amount of incineration ash will increase drastically. Against this backdrop, this study assessed the applicability of a plasma melting process to fly ash. Fly ash was collected from 14 incineration facilities to analyze its basic properties and perform melting experiments. Furthermore, scanning electron microscope (SEM) analysis and economic feasibility assessment were conducted. The molten fly ash slag exhibited a pH value of 9.9, and the ignition loss of fly ash was found to range from 14.5 to 25.7 wt.%. None of seven toxic elements (arsenic (As), cadmium (Cd), cyanide (CN), mercury (Hg), hexavalent chromium (Cr(VI)), copper, and lead (Pb)) was detected from the molten slag. In addition, 99.3 wt.% of chloride ion (Cl-), 97.9 wt.% of fluoride ion (F-), and 98.1 wt.% of sulphate ion (SO42-) were removed. The contents in the molten slag were found to be 0.19, 7.8, 27.8, 33.1, and 38 mg/kg for Cd, Pb, zinc, nickel, and F, respectively, and none of CN, Hg, and As was detected, thereby meeting the criteria for soil pollution. All of the environmental standards were met, and SEM analysis confirmed stable quality with high density and no surface pore. In the economic feasibility assessment, a profit of approximately 152.4 $/ton was also estimated compared to landfill disposal.

Evaluating the recycling potential of ashes discharged from waste incineration facilities and its dependency on pretreatment efficiency in Korea.

The amount of incineration ash (IA) is expected to increase in South Korea from the rapidly rising numbers and operation capacities of incineration facilities; therefore, it remains necessary to establish measurements for the enhanced recycling and circularity of IA. This study established a database of hazardous substances in IA by compiling discharge data and survey results from domestic incineration facilities, along with literature survey values. The recycling potential of IA was assessed considering leaching reduction efficiency of various pretreatment methods. In particular, 98.2% of bottom ash and 49.0% of fly ash satisfied the IA recycling criteria after melting. Also, when mixed at a ratio of âˆ¼ 78:22 natural soil to IA, the resulting material was usable for media-contact recycling by meeting the heavy metal content criteria of the Soil Environment Conservation Act.

Material Recycling for Manufacturing Aggregates Using Melting Slag of Automobile Shredder Residues.

The quantity of waste from end-of-life vehicles is increasing with an increase in the number of scrapped internal combustion engine vehicles owing to international trends such as carbon neutrality and particulate matter reduction. The recycling rate must be ≥95%; however, the average recycling rate remains at approximately 89%. Therefore, the improvement of the recycling of automobile shredder residues (ASR) is gaining attention. In this study, four types of products (interlocking, clay, and lightweight swelled ceramic (LSC) bricks, and asphalt paving aggregate (APA)) were manufactured using ASR melting slag (ASRMS). Environmental performance, quality standards, and technology were evaluated to assess the recyclability of the manufactured bricks. The interlocking brick substituted melting slag for sand and stone powder as an aggregate. As melting slag content increased, absorption decreased and bending strength increased. Clay brick was manufactured by replacing kaolin and feldspar with melting slag that substituted for 20%. The quality of clay bricks mixed with over 15% melting slag was not better than standard. Asphalt paving aggregate was used to investigate the optimum condition of slag content in mixed asphalt; the mixture ratio showed that 61% broken stone of 13 mm, 6% screenings, 10% melting slag, 15% sand and 8% filler was most effective. A lightweight swelled ceramic brick was manufactured by using melting slag, front glass, and so on. Specific gravity and compressive strength ranged from 0.38 to 0.51 and from 339.7 to 373.6 N/cm2. ASRMS exhibited an environmental performance suitable for recycling and the manufactured bricks satisfied the quality standards. The recyclability of ASR was also assessed in terms of waste usage, conformance to quality standards, market size, and demand prediction. APA showed the best results followed by interlocking, clay, and LSC bricks.