Sequential Introduction of Cations Deriving Large-Grain Csx FA1-x PbI3 Thin Film for Planar Hybrid Solar Cells: Insight into Phase-Segregation and Thermal-Healing Behavior.

Composition engineering of perovskite materials has been demonstrated to be important for high-performance solar cells. Recently, the energy favorable hybridization of formamidinium (FA) and cesium (Cs) in three dimension lead halide perovskites has been attracting increasing attention due to its potential benefit on durability. Herein, we reported a simple and effective method to produce phase-pure CsxFA1-xPbI3 thin film via sequential introduction of cations, in which the FA cation was introduced by interdiffusion annealing in the presence of N-methylimidazole (NMI). NMI was employed as an additive to slow down the crystallization and thus drive the formation of CsxFA1-xPbI3 with micrometer grain size, which probably facilitate the charge dissociation and transportation in photovoltaic devices. More importantly, composition dependent phase-segregation has been revealed and investigated for the first time during the phase-pure mixed-cation perovskites CsxFA1-xPbI3. The present findings demonstrated that suppressing phase-segregation of mixed-cation perovskites by meticulous composition engineering is significant for further development of efficient photovoltaics. It also suggested that phase-pure Cs0.15FA0.85PbI3 may be a promising candidate with superior phase-durability, which performed an efficiency over 16% in planar perovskite solar cells.

The Utilization of Amide Groups To Expand and Functionalize Metal-Organic Frameworks Simultaneously.

A new stepwise ligand-elongation strategy by amide spacers is utilized to prepare isoreticularly high-porous metal-organic frameworks (MOFs), namely, quasi-mesoporous [Cu2 (PDBAD)(H2 O)]n (H4 PDBAD=5,5'-((4,4'-((pyridine-3,5-dicarbonyl)bis(azanediyl))bis(benzoyl))bis(azanediyl))diisophthalic acid; NJU-Bai22: NJU-Bai for Nanjing University Bai's group), and mesoporous [Cu2 (PABAD)(H2 O)]n (H4 PABAD=5,5'-((4,4'-((4,4'-((pyridine-3,5-dicarbonyl)bis(azanediyl))bis(benzoyl))bis (azanediyl))bis(benzoyl))bis(azanediyl))diisophthalic acid; NJU-Bai23). Compared with the prototypical MOF of [Cu2 (PDAD)(H2 O)]n (H4 PDAD=5,5'-(pyridine-3,5-dicarbonyl)bis(azanediyl)diisophthalic acid; NJU-Bai21, also termed as PCN-124), both MOFs exhibit almost the same CO2 adsorption enthalpy and CO2 selectivity values, and better capacity for CO2 storage under high pressure; these results make them promising candidate materials for CO2 capture and sequestration. Interestingly, this new method, in comparison with traditional strategies of using phenyl or triple-bond spacers, is easier and cheaper, resulting in a better ability to retain high CO2 affinity and selectivity in MOFs with large pores and high CO2 storage capacity. Additionally, it may lead to the high thermal stability of the MOFs and also their tolerance to water, which is related to the balance between the density of functional groups and pore sizes. Therefore, this strategy could provide new opportunities to explore more functionalized mesoporous MOFs with high performance.

A Highly Stretchable Polymer that Can Be Thermally Healed at Mild Temperature.

Combining stretchability and self-healing properties in a man-made material is a challenging task. For an efficient self-healing material, weaker dynamic or reversible bonds should be presented as crosslinks so that they will first break upon damage and then reform after healing, which is not favorable when developing elastic materials. In this work, by incorporating dynamic Fe(III)-triazole coordination bonds into polydimethylsiloxane (PDMS) backbone, a highly elastic polymer is obtained that can be thermally healed at mild temperature. The as-prepared polymer can be stretched to 3400% strain at low loading speed (1 mm min(-1) ). When damaged, the polymer can be thermally healed at 60 °C for 20 h with a healing efficiency of over 90%. The good mechanical and healable properties of this polymer can be ascribed to the unique coordination bond strength and coordination conformation of Fe(III)-triazole coordination complex.

A Highly Stretchable and Autonomous Self-Healing Polymer Based on Combination of Pt···Pt and π-π Interactions.

A new self-healing polymer has been obtained by incorporating a cyclometalated platinum(II) complex Pt(C∧ N∧ N)Cl (C∧ N∧ N = 6-phenyl-2,2'-bipyridyl) into a polydimethylsiloxane (PDMS) backbone. The molecular interactions (a combination of Pt···Pt and π-π interactions) between cyclometalated platinum(II) complexes are strong enough to crosslink the linear PDMS polymer chains into an elastic film. The as prepared polymer can be stretched to over 20 times of its original length. When damaged, the polymer can be healed at room temperature without any healants or external stimuli. Moreover, the self-healing is insensitive to surface aging. This work represents the first example where the attractive metallophilic inter-actions are utilized to design self-healing materials. Moreover, our results suggest that the stretchability and self-healing properties can be obtained simultaneously without any conflict by optimizing the strength of crosslinking interactions.

Comparison of the electronic and vibrational optical activity of a europium(III) complex.

The geometry and the electronic structure of chiral lanthanide(III) complexes are traditionally probed by electronic methods, such as circularly polarised luminescence (CPL) and electronic circular dichroism (ECD) spectroscopy. The vibrational phenomena are much weaker. In the present study, however, significant enhancements of vibrational circular dichroism (VCD) and Raman optical activity (ROA) spectral intensities were observed during the formation of a chiral bipyridine-Eu(III) complex. The ten-fold enhancement of the vibrational absorption and VCD intensities was explained by a charge-transfer process and the dominant effect of the nitrate ion on the spectra. A much larger enhancement of the ROA and Raman intensities and a hundred-fold increase of the circular intensity difference (CID) ratio were explained by the resonance of the λ = 532 nm laser light with the (7)F0 → (5)D0 transitions. This phenomenon is combined with a chirality transfer, and mixing of the Raman and luminescence effects involving low-energy (7)F states of europium. The results thus indicate that the vibrational optical activity (VOA) may be a very sensitive tool for chirality detection and probing of the electronic structure of Eu(III) and other coordination compounds.

Potential switchable circularly polarized luminescence from chiral cyclometalated platinum(II) complexes.

A series of chiral cyclometalated platinum(II) complexes, [Pt((-)-L1)(Dmpi)]Cl ((-)-1), [Pt((+)-L1)(Dmpi)]Cl ((+)-1), [Pt((-)-L2)(Dmpi)]Cl ((-)-2), [Pt((+)-L2)(Dmpi)]Cl ((+)-2), [Pt3((-)-L2)2(Dmpi)4](ClO4)4 ((-)-3), and [Pt3((+)-L2)2(Dmpi)4](ClO4)4 ((+)-3) [(-)-L1 = (-)-4,5-pinene-6'-phenyl-2,2'-bipyridine, (+)-L1 = (+)-4,5-pinene-6'-phenyl-2,2'-bipyridine), (-)-L2 = (-)-1,3-bis(2-(4,5-pinene)pyridyl)benzene, (+)-L2 = (+)-1,3-bis(2-(4,5-pinene)pyridyl)benzene, Dmpi = 2,6-dimethylphenyl isocyanide], have been designed and synthesized. In aqueous solutions, (-)-1 and (+)-1 aggregate into one-dimensional helical chain structures through Pt···Pt, π-π, and hydrophobic-hydrophobic interactions. (-)-3 and (+)-3 represent a novel helical structure with Pt-Pt bonds. The formation of helical structures results in enhanced and distinct chiroptical properties as evidenced by circular dichroism spectra. Circularly polarized luminescence (CPL) was observed from the aggregates of (-)-1 and (+)-1 in water, as well as (-)-3 and (+)-3 in dichloromethane. The CPL activity can be switched reversibly (for (-)-1 and (+)-1) or irreversibly (for (-)-3 and (+)-3) by varying the temperature.

Asymmetric Donor-π-Acceptor-Type Benzo-Fused Aza-BODIPYs: Facile Synthesis and Colorimetric Properties.

Novel aza-diisoindolylmethene and their BF2 -chelating complexes (benzo-fused aza-BODIPYs) were synthesized on a large scale and in a facile manner from phthalonitrile in tBuOK-DMF solution. The unique asymmetric donor-π-acceptor structure facilitates B-N bond detachment in the presence of trifluoroacetic acid (TFA) in dichloromethane, resulting in sharp color change from red to colorless, with over 250 nm hypsochromic shift in the absorption maximum. This colorimetric process can be reversed by adding a very small amount of proton-accepting solvents or compounds. A (1) H and (11) B NMR spectroscopy study and also density functional theory (DFT) calculations suggest that TFA-induced B-N bond cleavage may disrupt the whole π-conjugation of the BODIPY molecule, resulting in significant colorimetric behavior.

Exciton coupling of surface complexes on a nanocrystal surface.

Exciton coupling may arise when chromophores are brought into close spatial proximity. Herein the intra-nanocrystal exciton coupling of the surface complexes formed by coordination of 8-hydroxyquinoline to ZnS nanocrystals (NCs) is reported. It is studied by absorption, photoluminescence (PL), PL excitation (PLE), and PL lifetime measurements. The exciton coupling of the surface complexes tunes the PL color and broadens the absorption and PLE windows of the NCs, and thus is a potential strategy for improving the light-harvesting efficiency of NC solar cells and photocatalysts.

Fine-tuning pore size by shifting coordination sites of ligands and surface polarization of metal-organic frameworks to sharply enhance the selectivity for CO2.

Based upon the (3,6)-connected metal-organic framework {Cu(L1)·2H(2)O·1.5DMF}(∞) (L1 = 5-(pyridin-4-yl)isophthalic acid) (SYSU, for Sun Yat-Sen University), iso-reticular {Cu(L2)·DMF}(∞) (L2 = 5-(pyridin-3-yl)isophthalic acid) (NJU-Bai7; NJU-Bai for Nanjing University Bai group) and {Cu(L3)·DMF·H(2)O}(∞) (L3 = 5-(pyrimidin-5-yl)isophthalic acid) (NJU-Bai8) were designed by shifting the coordination sites of ligands to fine-tune pore size and polarizing the inner surface with uncoordinated nitrogen atoms, respectively, with almost no changes in surface area or porosity. Compared with those of the prototype SYSU, both the adsorption enthalpy and selectivity of CO(2) for NJU-Bai7 and NJU-Bai8 have been greatly enhanced, which makes NJU-Bai7 and NJU-Bai8 good candidates for postcombustion CO(2) capture. Notably, the CO(2) adsorption enthalpy of NJU-Bai7 is the highest reported so far among the MOFs without any polarizing functional groups or open metal sites. Meanwhile, NJU-Bai8 exhibits high uptake of CO(2) and good CO(2)/CH(4) selectivity at high pressure, which are quite valuable characteristics in the purification of natural gases.

A single-molecule magnet based on heptacyanomolybdate with the highest energy barrier for a cyanide compound.

Three trinuclear Mn2Mo molecules based on the orbitally degenerate [Mo(CN)7](4-) anion were prepared, one of which is the first single-molecule magnet (SMM) based on heptacyanomolybdate. The blocking temperature and the energy barrier (U = 40.5 cm(-1)) are records for a cyanide-based SMM. Wide hysteresis loops and sharp quantum tunneling steps were observed from single-crystal measurements.

Coplanar bithiazole-centered heterocyclic aromatic fluorescent compounds having different donor/acceptor terminal groups.

A family of stable and soluble bithiazole-centered heterocyclic aromatic fluorescent compounds is described herein. All these multiple N-donor containing compounds have effective π-conjugated systems and different imidazole, pyridine, thiophene, triphenylamino, benzoic acid, and ethyl benzoate tails showing distinguishable D-A-A-D and A-A-A-A structures. X-ray single-crystal structures of seven compounds indicate that all of the bithiazole cores have the same trans coplanar configuration but exhibit different dihedral angles with their adjacent aromatic heterocycles (4.5(6)-69.7(3)°). Optical and electrochemical results demonstrate that the TPA-terminated bithiazole compound 2TPA2TZ has yellow fluorescence and reversible redox activity as well as extraordinarily high thermal stability. Theoretical and experimental studies have been made to reveal the differences from related compounds with adjustable electronic properties. The internal reorganization energy (λ) studies have been carried out to indicate the differences between the bithiazole-based derivatives and the corresponding bithiophene-based counterparts.

Asymmetrical/symmetrical D-π-A/D-π-D thiazole-containing aromatic heterocyclic fluorescent compounds having the same triphenylamino chromophores.

A family of linear asymmetrical D-π-A and symmetrical D-π-D types of thiazole-based aromatic heterocyclic fluorescent compounds bearing various electron-donating and electron-withdrawing tails (bromo, triphenylamino, pyridyl, thienyl and benzoic acid) have been designed and prepared successfully. Synthetic, structural, thermal, spectral and computational comparisons have been carried out for related compounds because of their adjustable electronic properties. It is interesting to mention that compound 2 can be prepared from 5-bromothiazole by one-pot Suzuki-Miyaura coupling and subsequent C-H activation reactions via a 5-TPA-substituted thiazole intermediate 1. X-ray single-crystal structures of six compounds indicate that they all crystallize in the triclinic P1 space group and the thiazole core exhibits different dihedral angles with its adjacent benzene ring of the triphenylamino group (3.6(3)-40.8(3)°). The photophysical and electrochemical results demonstrate that compound 7 exhibits high electrochemical activity with a green fluorescence emission. Meanwhile, compounds 1, 2, and 6 show high luminescence quantum yields, and compound 8 exhibits excellent thermal stability (T(d(10)) = 503 °C).

Syntheses, photoluminescence, and electroluminescence of a series of iridium complexes with trifluoromethyl-substituted 2-phenylpyridine as the main ligands and tetraphenylimidodiphosphinate as the ancillary ligand.

Five bis-cyclometalated iridium complexes with tifluoromethyl-substituted 2-phenylpyridine (ppy) at different positions of its phenyl group as the main ligands and tetraphenylimidodiphosphinate (tpip) as the ancillary ligand, 2-6 (1 is a trifluoromethyl-free complex), were prepared, and their X-ray crystallography, photoluminescence, and electrochemistry were investigated. The number and positions of trifluoromethyl groups at the phenyl ring of ppy greatly affected the emission spectra of Ir(3+) complexes, and their corresponding emission peaks at 533, 502, 524, 480, and 542 nm were observed at room temperature, respectively. Constructed with complexes 2-6 as the emitters, respectively, the organic light-emitting diodes (OLEDs) with the structure of indium-tin oxide/1,1-bis[4-(di-p-tolylamino)phenyl]cyclohexane (30 nm)/Ir (x wt %):bis[3,5-bis(9H-carbazol-9-yl)phenyl]diphenylsilane (15 nm)/1,3,5-tris(1-phenyl-1H-benzo[d]imidazol-2-yl)phenyl (45 nm)/LiF (1 nm)/Al (100 nm) showed good performances. Particularly, device G4 based on 4-trifluoromethyl-substituted complex 4 with x = 8 wt % obtained a maximum luminance of over 39000 cd m(-2) and maximum luminance efficiency (η(L)) and power efficiency (η(p)) of 50.8 cd A(-1) and 29.0 lm W(-1), respectively. The results suggested that all of the complexes 2-6 would have potential applications in OLEDs.

Circular dichroism spectroscopy study of crystalline-to-amorphous transformation in chiral platinum(II) complexes.

Two couples of enantiomeric platinum(II) complexes: Pt(L1a )Cl (1a), Pt(L1b )Cl (1b) and Pt(L1a )(C ≡ C - Ph) (2a), Pt(L1b )(C ≡ C - Ph) (2b) (L1a = (+)-1,3-di-(2-(4,5-pinene)pyridyl)benzene, L1b = (-)-1,3-di-(2-(4,5-pinene)pyridyl)benzene) were synthesized and characterized. Their absolute configurations were determined by single crystal X-ray diffraction and further verified by circular dichroism (CD) spectra (including electronic circular dichroism [ECD] and vibrational circular dichroism [VCD]). These complexes show interesting mechanoluminescence and/or vapoluminescence due to crystalline-to-amorphous transformation. The crystalline solids, grinding-induced amorphous powders, and vapor-induced amorphous powders of complexes 2a and 2b were comparatively investigated by solid-state ECD and VCD spectra. The transformation from crystalline solids to amorphous powders was accompanied by significant variances of the spectral feature in both ECD and VCD spectra.

Formation of a metal-organic framework with high surface area and gas uptake by breaking edges off truncated cuboctahedral cages.

Breaking edges off regular truncated cuboctahedra leads to a metal-organic framework (MOF) with polybenzene topology. This fully characterized MOF with lowest connectivity has the largest BET surface area among interpenetrated MOFs.

Solvent-induced single-crystal-to-single-crystal transformation in multifunctional chiral dysprosium(III) compounds.

Two new enantiomeric ionic chiral dysprosium(III) compounds were designed and synthesized. These compounds show simultaneously the optical activity, ferroelectric effects, nonlinear-optical effects, and slow magnetic relaxation behavior. More interestingly, these compounds exhibit reversible single-crystal-to-single-crystal transformations associated with the release or absorption of solvent molecules. The structure transformations are accompanied by distinct changes in the physical properties.

Exciton coupling analysis and enolization monitoring by vibrational circular dichroism spectra of camphor diketones.

The keto-enol tautomerization of (1R,3R,4R)-(+)-3-benzoylcamphor in solution was traced by the infrared (IR) and vibrational circular dichroism (VCD) spectra, reflecting the Boltzmann populations of the isomers. To investigate the exciton coupling of the carbonyl vibrations in the region 1800-1600 cm(-1), VCD spectra of a series of camphor derived ß-diketones were analyzed with the support of density functional theory (DFT) calculations. The results confirm the importance of the exciton chirality for VCD and manifest that the VCD spectroscopy is a convenient technique to investigate the keto-enol tautomerization equilibria in chiral diketones.

Vibrational and electronic circular dichroism monitoring of copper(II) coordination with a chiral ligand.

Novel copper(II) coordination compounds with chiral macrocyclic imine ligands derived from R-/S-camphor were asymmetrically synthesized and characterized with the aid of chiroptical spectroscopies. Crystal structures of both enantiomers were determined by single crystal X-ray diffraction analysis. Circular dichroism (CD) spectra were analyzed using a simplified exciton model as well as quantum chemical computations. The absolute configuration of the copper(II) coordination compounds determined from CD was found consistent with the crystal data. The copper(II) complexes were further investigated by vibrational CD (VCD) measurement combined with density functional theory calculation. The complex formation was evidenced by spectral shifts of the characteristic bands in the CD and VCD spectra.

meso-Aryl phenanthroporphyrins: synthesis and spectroscopic properties.

The successful synthesis of tetraphenyltetraphenanthroporphyrin (TPTPhenP; 5a) in 2006 under modified Rothemund-Lindsey conditions yielded a tetraphenyl porphyrinoid with a B band redshifted to an unprecedented 576 nm. Radially symmetric fused-ring expansion of tetraphenylporphyrin with phenanthrene moieties results in very deep saddling due to steric crowding and very marked redshifts of the Q and B (or Soret) porphyrinoid absorption bands. The extent to which the TPTPhenP structure can be further modified is explored, and the optical properties of TPTPhenPs are analyzed based on a perimeter model approach that makes use of time-dependent DFT calculations and magnetic circular dichroism spectroscopy and also based on a detailed analysis of the fluorescence emission. Attempts to introduce substituents at the ortho and meta positions of the meso-phenyl groups and to insert a central metal proved unsuccessful. The synthesis of a series of TPTPhenPs with strong electron-withdrawing (-CN, -NO(2)) and -donating (-CH(3), -N(CH(3))(2)) substituents at the para positions of the meso-phenyl rings is reported. Marked redshifts of the main spectral bands were consistently observed. The most pronounced spectral changes were observed with -N(CH(3))(2) groups (5i) due to a marked destabilization of the HOMO, which has large MO coefficients on the meso-carbon atoms. Protonation of 5i at both the ligand core and at the -N(CH(3))(2) groups resulted in unprecedented Q(00) band absorption at wavelengths greater than 1200 nm.

Linear heterocyclic aromatic fluorescence compounds having various donor-acceptor spacers prepared by the combination of carbon-carbon bond and carbon-nitrogen bond cross-coupling reactions.

A family of novel linear 1,10-phenanthroline-based (A-D-A-D-A) and oligothiophene-based (A-D-D-D-(D)-A) heterocyclic aromatic fluorescence compounds having N-containing imidazole and pyridine tails with effective π-conjugated systems, prepared by the combination of carbon-carbon (C-C) bond and carbon-nitrogen (C-N) bond cross-coupling reactions, is described. They have molecular lengths of more than 2.30 nm in the cases of 4, 6, 9, and 26, various D-A spacers, and certain N-coordination sites (phen, imidazole, and pyridine). X-ray single-crystal structures of 13 compounds reveal a variety of trans and cis configurations with different dihedral angles between adjacent aromatic heterocycles. Synthetic, computational, and spectral studies have been made to reveal the differences between cross-coupling approaches on the C-C bond and C-N bond formation as well as band gaps and energy levels and optical and electrochemical properties for related compounds. The influences of introducing a ß-methyl group to the thiophene ring on reaction activity, solubility, and conformation of related compounds have also been discussed.