RESUMO
BACKGROUND: The hepatitis B virus (HBV) is a serious occupational hazard for healthcare workers, including dentists. The purpose of this study is to assess dentists' knowledge, attitude, and practice (KAP) with respect to hepatitis B vaccination. MATERIALS AND METHODS: A cross-sectional survey of a representative sample of dentists (n = 349) from Lebanon was carried out. Participants' knowledge of hepatitis B, attitudes toward vaccination, and immunization habits were assessed using a standardized questionnaire. To examine the data, descriptive statistics were used, and associations between variables were investigated using appropriate statistical tests. RESULTS: The study found that most participating dentists are HBV-vaccinated. These dentists boast a basic to a significantly substantial understanding of HBV infection prevention strategies, such as immunization, routine preventive measures, and handling equipment. Notwithstanding the generally positive attitudes towards vaccination, a proportion of dentists lacked some HBV prevention practices, specifically with respect to conducting regular follow-ups of anti-HBs titer levels and getting booster vaccination doses when warranted. CONCLUSION: This study sheds light on the KAP of hepatitis B immunization among Lebanese dentists. The findings emphasize the significance of focused educational efforts in view of improving awareness and encouraging a more thorough understanding of the benefits of vaccination. The study provides useful data that can be used to influence public health policies as well as activities aimed at increasing hepatitis B vaccination rates among dental professionals in Lebanon. How to cite this article: Yared G, Sokhn ES, Al-Khatib A, et al. Knowledge, Attitude, and Practice of Hepatitis B Vaccination among Dentists in Lebanon. J Contemp Dent Pract 2024;25(2):134-140.
Assuntos
Conhecimentos, Atitudes e Prática em Saúde , Hepatite B , Humanos , Estudos Transversais , Líbano , Vírus da Hepatite B , Hepatite B/prevenção & controle , Vacinação , Inquéritos e Questionários , OdontólogosRESUMO
INTRODUCTION: This study aimed to assess the depth and height of the infrazygomatic crest (IZC) located in the posterior maxilla at the junction with the zygomatic process in patients with different vertical facial growth types as a potential miniscrew insertion site. METHODS: The sample consisted of cone-beam computed tomography scans of 117 patients (42 males and 75 females), with a mean age of 22.9 ± 2.7. The population was divided into 3 groups according to the measured SN-GoGn angle: Decreased facial proportions (n = 28), average facial proportions (n = 62), and increased facial proportions (n = 27). Bone depth was assessed at 5 levels: apex, 1, 2, 3, and 4 mm vertically from the apex. The measurements were performed on the mesiobuccal and distobuccal roots of the first molar and the mesiobuccal root of the second molar. Repeated-measure analysis of variance followed by univariates analyses and Bonferroni multiple comparisons were performed to compare the mean bone thickness between groups. The IZC height was assessed through a vertical line ranging from the furcation of the maxillary first molar to the sinus floor. Analysis of variance followed by Tukey (honestly significant difference) post-hoc tests was used to compare the mean height between groups. RESULTS: Mean bone depth between the 3 groups were significantly different at the mesiobuccal root region of the first molar at all the measured levels. It was smaller for average, intermediate for decreased, and elevated for increased facial proportions. No statistical difference was shown at the distobuccal root of the first molar except for the apex level and the mesiobuccal root of the second molar except for the apex and 4 mm levels. The mean bone height was significantly different between subjects with increased facial proportions and the 2 other groups. CONCLUSIONS: Subjects with increased facial proportions tend to present a longer and deeper IZC followed by decreased facial proportions, then average facial proportions.
Assuntos
Levantamento do Assoalho do Seio Maxilar , Masculino , Feminino , Humanos , Adulto Jovem , Adulto , Tomografia Computadorizada de Feixe Cônico/métodos , Dente Molar , Raiz Dentária/diagnóstico por imagem , Maxila/diagnóstico por imagemRESUMO
AIM: The aim of the present work was to explain the poor biointegration of acellular dermal xenogeneic matrix, leading to an unfavorable gingival healing following a grafting procedure for the treatment of soft tissue deficiencies. BACKGROUND: Numerous works have demonstrated the successful use of acellular dermal matrix (ADM) in soft tissue augmentation procedures. However, spare human investigations reported adverse healing outcomes at microscopic level. CASE DESCRIPTION: Three patients showing various soft tissue deficiencies (recession, gingival thickening) requiring a gingival augmentation were grafted using an ADM porcine acellular dermal matrices (pADM) as a soft tissue substitute. For this purpose, appropriate soft tissue augmentation surgeries were performed and the grafted pADM was left for proper healing. Biopsies were harvested from two out of the three patients, respectively, at 11 and 27 weeks in order to conduct a histological evaluation of the pADM's doubtful biointegration. Moreover, the ultrastructural analysis of pADM was performed using scanning electron microscopy, and additional histological procedures were used to assess its ability to support human gingival fibroblast cultures. Signs of gingival inflammation persisted several months postoperatively. Histologically, numerous inflammatory cells characterized the grafted site. Indeed, the high number of foreign body giant cell granulomas and the very densified newly formed collagen fibers highlighted a fibrotic process within gingival connective tissue. The ultrastructural and histological analysis showed that pADM was characterized by very thick and dense collagen bundles demonstrating a nonphysiological collagen network organization. Cell culture experiments showed fibroblasts proliferating on the matrix surface, sparing its deeper part, even though the collagen matrix degradation seemed to occur following a gradient from the pADM surface inward. CONCLUSION: The unfavorable clinical results may be caused by the poor colonization of matrix cells and poor angiogenesis leading to the inadequate biointegration of pADM. Hence, the pADM structure in terms of porosity and degradability should be further investigated. CLINICAL SIGNIFICANCE: The present cases highlighted a poor integration of pADM following soft tissue grafting procedures, which was caused by the inadequate ultrastructure of the used pADM. Therefore, despite the utility of such tissue substitutes, their manufacturing improvement could be required to obtain a better biointegration.
Assuntos
Derme Acelular , Animais , Colágeno , Fibroblastos , Gengiva , Humanos , Suínos , CicatrizaçãoRESUMO
BACKGROUND: The periimplant bone level has been used as one of the criteria to assess the success of dental implants. It has been documented that the bone supporting two-piece implants undergoes resorption first following the second-stage surgery and later on further to abutment connection and delivery of the final prosthesis. OBJECTIVE: The aim of this multicentric randomized clinical trial was to evaluate the crestal bone resorption around internal connection dental implants using a new surgical protocol that aims to respect the biological distance, relying on the benefit of a friction fit connection abutment (test group) compared with implants receiving conventional healing abutments at second-stage surgery (control group). MATERIALS AND METHODS: A total of partially edentulous patients were consecutively treated at two private clinics, with two adjacent two-stage implants. Three months after the first surgery, one of the implants was randomly allocated to the control group and was uncovered using a healing abutment, while the other implant received a standard final abutment and was seated and tightened to 30 Ncm. At each step of the prosthetic try-in, the abutment in the test group was removed and then retightened to 30 Ncm. Horizontal bone changes were assessed using periapical radiographs immediately after implant placement and at 3 (second-stage surgery), 6, 9 and 12 months follow-up examinations. RESULTS: At 12 months follow-up, no implant failure was reported in both groups. In the control group, the mean periimplant bone resorption was 0.249 ± 0.362 at M3, 0.773 ± 0.413 at M6, 0.904 ± 0.36 at M9 and 1.047 ± 0.395 at M12. The test group revealed a statistically significant lower marginal bone loss of 20.88% at M3 (0.197 ± 0.262), 22.25% at M6 (0.601 ± 0.386), 24.23% at M9 (0.685 ± 0.341) and 19.2% at M9 (0.846 ± 0.454). The results revealed that bone loss increased over time, with the greatest change in bone loss occurring between 3 and 6 months. Alveolar bone loss was significantly greater in the control condition than the test condition. CONCLUSION: The results of this prospective study demonstrated the benefit of placing a prosthetic component with a stable connection at second-stage surgery, in terms of reduced marginal bone remodeling when compared with conventional procedure. CLINICAL SIGNIFICANCE: The use of a stable connection in a healing component during try-in stages prior to final restoration placement leads to less periimplant marginal bone loss.
Assuntos
Remodelação Óssea , Dente Suporte , Implantes Dentários , Boca Edêntula , Idoso , Implantação Dentária Endóssea , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Estudos ProspectivosRESUMO
AIM: The use of the ala-tragus line (ATL) to orient the occlusal plane (OP) is controversial because there is a lack of agreement on the exact points of reference for this line. This study determined the relationship between the natural OP and ATL which was established by using the inferior border of the ala of the nose and (1) the superior border of the tragus (ATL1), (2) the tip (ATL2), and (3) the inferior border of the tragus (ATL3). MATERIALS AND METHODS: Lateral cephalometric radiographs were taken of each subject by a standard method and tracings were obtained on acetate paper to show the OP and the three ala-tragus lines. The relationship between the OP and each of ATL was measured for each subject. Mean and standard deviation values were then calculated for the relationship. Statistical analysis was performed using repeated measure analysis of variance followed by Bonferroni pairwise comparisons and Student's t-test (α = 0.05). RESULTS: Significant differences were noted between the three mean angles (p = 0.046). The mean angle (3.275 degrees ± 2.54) formed by OP and ATL2 was significantly the smallest (p < 0.05). CONCLUSION: The ala-tragus line, extending from the inferior border of the ala of the nose to the tip of the tragus of the ear presented the closest relationship to the natural occlusal plane.
Assuntos
Cefalometria/métodos , Oclusão Dentária , Prótese Total , Pavilhão Auricular/anatomia & histologia , Cartilagens Nasais/anatomia & histologia , Pontos de Referência Anatômicos/anatomia & histologia , Cefalometria/estatística & dados numéricos , Planejamento de Dentadura , Humanos , Adulto JovemRESUMO
This prospective study investigated clinically and radiologically the effectiveness of the use of a combined hard and soft tissue graft retrieved from the maxillary tuberosity and designed for alveolar ridge preservation following tooth extraction. Seven patients scheduled for a single mono-rooted tooth extraction were included in the study. After atraumatic extraction, sockets were filled with a "one-piece" dual tissue graft harvested from the tuberosity using an adjusted trephine. CBCTs were performed before the extraction and 4 months after ridge preservation, to analyze the vertical and horizontal alterations of the ridge, using ITK-Snap software. Clinical measurements of both soft and hard tissues were also assessed during the extraction and implant placement. All sites healed uneventfully. After 4 months, the 3D super-imposition of both CBCTs showed a mean bone volume resorption of 65 ± 76.7 mm3 (10.2 ± 10%). The mean horizontal reduction at 2, 4, and 6 mm from the top of the crest was respectively 1.5 ± 1.3 mm, 0.47 ± 1.4 mm and 0.57 ± 0.7 mm, while the mean vertical loss was 0.026 mm ± 2 mm. The mean soft tissue horizontal gain was 1.73 ± 1.12 mm. The "one-piece" autologous tuberosity graft was proven to be a safe and effective alveolar ridge preservation technique and may represent a feasible, user-friendly, time saving, low-cost solution for minimizing dimensional loss following tooth extraction.
Assuntos
Processo Alveolar , Reabsorção Óssea , Humanos , Alvéolo Dental/diagnóstico por imagem , Alvéolo Dental/cirurgia , Projetos Piloto , Estudos Prospectivos , Reabsorção Óssea/patologia , Extração Dentária/efeitos adversosRESUMO
OBJECTIVES: To assess the implant position (IP), the interradicular septum width (ISW) and radiographic bone to implant contact (BIC), when simulating an immediate implant placement in first and second mandibular molars. STUDY DESIGN: 75 patients (150 sites) were studied using cone beam computed tomography scans (CBCT) and computer aided design software. Implants were placed in a prosthetically driven position; subsequently, IP and BIC were digitally calculated. Linear ISW was also analyzed at 2, 4 and 6mm apically to the highest septal bony peak. Multiple linear regressions were performed to assess relationships between BIC and the different predictive variables. Additionally, the receiver operating characteristics (ROC) curve was used to create a model for BIC based on the ISW at 2mm. RESULTS: BIC in implants replacing first molars was the highest at the septal (S) position when compared to those in septal-mesial (S-M) position (p-value 0.001). As for the second molar, the highest percentage of BIC was recorded at the septal (S) position, followed by those in S-M and mesial (M) positions (p<0.001). CONCLUSION: According to the proposed classification, clinician must consider the ISW and IP when placing immediate implant in the first and second mandibular molar sites. When tackling first molars, S position is predominant, while S-M position is the most common in the second molars. ISW at 2mm should be at least respectively 2mm and 2.5mm at the first and second molar sites to achieve 50% of BIC.
Assuntos
Implantes Dentários , Humanos , Dente Molar/diagnóstico por imagem , Dente Molar/cirurgia , Tomografia Computadorizada de Feixe Cônico/métodos , Software , Mandíbula/diagnóstico por imagem , Mandíbula/cirurgiaRESUMO
Purpose: A buccal bone thickness (BBT) of at least 1.8-2 mm is necessary to ensure long-term implant stability, and a bone grafting procedure is commonly needed to restore this BBT. This study aims to prove the effectiveness of a novel bone augmentation technique in which minero-organic bone substitutes are solely used to restore adequate BBT, excluding the need for coverage membranes. Methods: Fifty partially edentulous patients having a residual bone width ranging between 5 and 6 mm were enrolled in this study. The horizontal buccal defects were grafted simultaneously at implant placement. Minero-organic collagen bovine bone blocks (CBBB) were placed on the outer side of the buccal bone wall, and adapted to the defect morphology through slow compressive movements. The grafted sites were not covered with any type of membrane nor stabilized with fixation pins. Cone-beam computed tomography scans were obtained pre-operatively, immediately post-surgery, and four months later. Scans were superimposed on the ITK-Snap software to measure the amount of bone gain and assess the percentage of CBBB resorption. Measurements were effectuated at four different levels apically to crestal level. Results: Radiographic findings showed BBT increase and CBBB resorption in all cases, four months post-grafting. A mean horizontal bone gain of 1.39 mm was calculated at a crestal level. Conclusion: Based on these findings, it appears that this novel and user-friendly bone grafting technique can achieve positive outcomes from both clinical and radiographic perspectives.
RESUMO
PURPOSE: To assess volumetrically, the impact of vertical facial growth types (VGFT) on the retromolar area as a bone donor site MATERIAL AND METHODS: 60 cone beam computed tomography (CBCT) scans of adult individuals were classified in three groups according to their SN-GoGn angle: hypodivergent group (hG) (33.33%), normodivergent group (NG) (30%) and hyperdivergent group (HG) (36.67%). Total harvestable bone volume and surface (TBV and TBS respectively), total cortical and cancellous bone volume (TCBV and TcBV respectively) and the percentage of cortical and cancellous bone volume (CBV and cBV respectively) were evaluated. RESULTS: The whole sample showed a mean TBV of 1220.99±448.81mm³ and a mean TBS of 940.29±259.93mm². Statistically significant differences were found between the different outcome variables and the vertical growth patterns (p<0.001). TBS differs for the different vertical growth patterns with the highest mean of TBS observed in the hG group. TBV also significantly differs between the different vertical growth patterns (p<0.001) with the highest mean observed for the hG individuals. Significant differences in percentages of cBV and CBV were present between the hyper-divergent groups and the other groups (p<0.001) with the hyper-divergent group having the lowest percentage of CBV and the highest percentage of cBV. CONCLUSION: hypodivergent individuals tend to have thicker bone blocks that can be used in onlay technique while thinner bone blocks harvested from hyperdivergent and normodivergent individuals can be used in three-dimensional grafting approach.
Assuntos
Face , Mandíbula , Adulto , Humanos , Cefalometria/métodos , Mandíbula/diagnóstico por imagem , Face/diagnóstico por imagem , Tomografia Computadorizada de Feixe Cônico/métodosRESUMO
Vertical soft tissue augmentation between implants can be clinically challenging and burdensome for patients when employing conventional techniques. Recently, with the introduction of xenogenic collagen matrices, the principle of single-site surgery has become more common. However, some issues persist regarding graft stability and tissue integration. In the present technical note, the authors introduce the "HAT-TRICK" technique to address these observed difficulties. As the name suggests, this technique is believed to provide improved stability, volumetric gain, and histological integration of the implanted matrix by shaping it appropriately resembling a hat over the crest with apical bevels, stabilized with fixation pins and infused with cross-linked hyaluronic acid (xHya). A two-month observation of a bi-maxillary case is presented with detailed description of the technique and digitalized comparison methods for an easier explanation of the introduced technique.
RESUMO
PURPOSE: To investigate clinically and radiographically at 4 months post-operatively the outcomes of mixing demineralized bovine bone material (DBBM) with cross-linked hyaluronic acid in alveolar ridge preservation. MATERIAL AND METHODS: Seven patients presenting bilateral hopeless teeth (14 teeth) were enrolled in the study, the test site contained demineralized bovine bone material (DBBM) mixed with cross-linked hyaluronic acid (xHyA) while the control site contained only DBBM. 4 months post-operatively prior to implant placement a Cone beam computed tomography (CBCT) scan was recorded and compared to the initial scan to assess the volumetric and linear bone resorption that occurred in both sites. Clinically, sites that needed further bone grafting at the implant placement stage were recorded. Differences in volumetric and linear bone resorption between both groups were assessed using Wilcoxon signed rank test. McNemar test was also used to evaluate difference in bone grafting need between both groups. RESULTS: All sites healed uneventfully, volumetric and linear resorption differences between the baseline and 4 months post-operatively were obtained for each site. The mean volumetric and linear bone resorption were respectively 36.56 ± 1.69%, 1.42 ± 0.16 mm in the controls sites and 26.96 ± 1.83%; 0.73 ± 0.052 mm in the tests sites. The values were significantly higher among controls sites (P=0.018). No significant differences were observed in the need for bone grafting between both groups. CONCLUSION: Cross-linked hyaluronic acid (xHyA) appears to limit the post-extractional alveolar bone resorption when mixed with DBBM.
Assuntos
Perda do Osso Alveolar , Aumento do Rebordo Alveolar , Humanos , Animais , Bovinos , Projetos Piloto , Ácido Hialurônico , Alvéolo Dental/diagnóstico por imagem , Alvéolo Dental/cirurgia , Aumento do Rebordo Alveolar/métodos , Extração Dentária/efeitos adversos , Perda do Osso Alveolar/diagnóstico por imagem , Perda do Osso Alveolar/cirurgia , Processo Alveolar/diagnóstico por imagem , Processo Alveolar/cirurgiaRESUMO
OBJECTIVE: The aim of this study was to assess lower third molar space using four different radiographic reconstructed Cone Beam Computed Tomography (CBCT) images: orthopantomogram, lateral cephalogram, multiplanar CBCT and a newly introduced three-dimensional (3D) simulation technique. METHODS: The CBCT scans of 32 individuals (20.97 ± 2.152 years) with a total of 50 lower third molars were collected and analyzed. The ratio between the necessary space and available space for lower third molars was calculated on each radiographic reconstructed image. Repeated-measure analysis of variance followed by multiple comparison tests were used. RESULTS: The mean ratio was significantly smaller with cephalograms (0.611 ± 0.263), followed respectively by orthopantomograms (0.756 ± 0.221), multiplanar CBCT (0.789 ± 0.191) and 3D simulation technique (0.807 ± 0.193) (p < 0.001). The lowest mean difference was recorded between multiplanar CBCT and 3D simulation technique (0.017). Intraclass correlation coefficient was strong (>0.90) for all techniques except cephalograms. CONCLUSIONS: The assessment of the lower third molar space differs according to the adopted imaging technique. Three-dimensional simulation technique is a useful novel technology that allows an exploration of the crown in many different dimensions and orientations, giving more predictable results than the conventional methods.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Dente Serotino , Tomografia Computadorizada de Feixe Cônico/métodos , Humanos , Imageamento Tridimensional/métodos , Dente Molar , Dente Serotino/diagnóstico por imagem , Radiografia Panorâmica/métodosRESUMO
Hyperhomocysteinemia is a rare disease caused by nutritional deficiencies or genetic impairment of cysteine metabolism. To date, no oral manifestations of hyperhomocysteinemia have been described in humans. Therefore, to our knowledge, the present case report is the first description of a hyperhomocysteinemic patient showing oral tissue alterations leading to both early tooth loss and failed implant osseointegration. The patient presented with a methylenetetrahydrofolate reductase gene mutation (677T polymorphism) leading to mild hyperhomocysteinemia. The radiologic analysis showed hyperdense lesions scattered in the maxillae. The histologic observations indicated alterations in both collagen and elastic networks in the gingiva and dermis. Interestingly, the presence of ectopic mineralized inclusions was noted in both periodontal ligament and gingiva. Strong osteoclastic activity was associated with abnormal calcification of trabecular spaces. Uneven oral tissue remodeling due to high tissue levels of homocysteine could explain the pathologic manifestations observed in this case.
Assuntos
Hiper-Homocisteinemia , Humanos , Hiper-Homocisteinemia/complicações , Hiper-Homocisteinemia/genética , Metilenotetra-Hidrofolato Redutase (NADPH2)/genética , Polimorfismo GenéticoRESUMO
Mutation of just a single extracellular matrix protein, a receptor or enzyme involved in connective tissue metabolism is sufficient to cause systemic pathologies and failure of tissues that are subjected to strong mechanical stresses. Skin histological and computerized image analyses can provide a good qualitative and quantitative indication of these inherited connective tissue diseases. In this study, skin biopsies from young (10 to 25 years) and middle-aged patients (26 to 50 years) suffering from Ehlers-Danlos syndromes (EDS), Marfan syndrome (MS) or pseudoxanthoma elasticum (PXE) were studied after specific staining of both the collagen and elastic networks. Findings from the histomorphometric analyses conducted on skin sections of the patients with EDS, MS and PXE were compared to skin sections of healthy subjects from the same age groups. Our results show that both the collagen and the elastic networks were affected in all the studied pathological cases, but that the adverse changes to the elastic network in older patients were distinct from the physiological changes observed during aging process for healthy subjects. This degenerative process may be explained by an added phenomenon involving a general connective tissue proteolysis.
Assuntos
Doenças do Tecido Conjuntivo , Síndrome de Ehlers-Danlos , Síndrome de Marfan , Pseudoxantoma Elástico , Adolescente , Adulto , Criança , Colágeno/análise , Tecido Conjuntivo/patologia , Doenças do Tecido Conjuntivo/genética , Doenças do Tecido Conjuntivo/metabolismo , Doenças do Tecido Conjuntivo/patologia , Síndrome de Ehlers-Danlos/metabolismo , Síndrome de Ehlers-Danlos/patologia , Matriz Extracelular/química , Matriz Extracelular/metabolismo , Matriz Extracelular/patologia , Humanos , Síndrome de Marfan/patologia , Pessoa de Meia-Idade , Pseudoxantoma Elástico/metabolismo , Pseudoxantoma Elástico/patologia , Pele/patologia , Adulto JovemRESUMO
Tooth extraction causes major changes to the ridge, rendering implant placement a more challenging procedure. Proper management of the socket is necessary to ensure sufficient bone and soft tissue for a successful implant-supported prosthesis. This article presents a practical approach for autologous hard and soft tissue grafting. A soft and hard tissue graft is harvested in one piece from the maxillary tuberosity and stabilized in the extraction socket.
RESUMO
AIM: This systematic article reviews the literature on the confounding parameters that affect short implant survival in order to establish specific surgical and prosthetic protocols that create an optimal biomechanical scenario and ensure implant longevity. MATERIALS AND METHODS: The available literature was screened for randomized clinical trials and prospective cohort and retrospective studies, published up to February 20, 2020, on the prognosis of short-length implants placed in posterior jaws. Studies evaluating the 5-year clinical performance of short dental implants (5 mm or 6 mm) in fixed rehabilitations of partially edentulous posterior jaws were included. RESULTS: Eleven studies were selected after assessment of inclusion and exclusion criteria, of which 8 were RCTs, 2 were prospective studies, and 1 was a retrospective study. After 5 years in function, 22 short (12 in maxilla and 10 in mandible) and 10 standard (2 in maxilla and 8 in mandible) implants were lost, resulting in high survival rates independent of implant length or location. More biological complications were found in standard implants especially those placed in augmented posterior mandibles (135 complications compared to 48 in short mandibular implants). Splinted prostheses were associated with less technical complications (15 out of 53 complications affecting short implants). CONCLUSION: The findings of this review showed that, when used correctly, short implants achieve predictable and promising long-term outcomes, provided they are placed following a comprehensive surgical and prosthetic protocol, based on the different biomechanical parameters essential to optimize long-term prognosis. CLINICAL SIGNIFICANCE: The use of short implants in clinical practice has considerably increased in a wide variety of cases, given that they offer several advantages for both patient and practitioner. Recent literature shows that, when specific criteria are respected, new generations of short implants present high, long-term survival rates. This review is designed to provide a thorough understanding of the surgical and prosthetic protocols that create an optimal biomechanical scenario for short implants and improve their prognosis.
Assuntos
Aumento do Rebordo Alveolar , Implantes Dentários , Implantação Dentária Endóssea , Planejamento de Prótese Dentária , Prótese Dentária Fixada por Implante , Falha de Restauração Dentária , Humanos , Mandíbula/cirurgia , Estudos Prospectivos , Estudos Retrospectivos , Resultado do TratamentoRESUMO
Different techniques for the enucleation of jaw cyst lesion in the oral and maxillofacial regions have been proposed, including the bone lid technique. The purpose of this case report is to describe the case of a cystic lesion, approached with the bone lid technique performed using a piezoelectric device, with an 8-month clinical and radiographic follow-up. A 14-year-old male patient was treated for a suspicious lesion detected on a panoramic radiograph. The concerned area was surgically accessed, and a radiographically predetermined bony window was drawn, and the beveled bony lid was removed. The underlying lesion was enucleated and sent for pathology as a routine procedure, and the removed bony lid was repositioned in situ and secured with a collagen tape. Healing was uneventful with limited swelling and reduced pain. A complete radiographic bone healing at the previously diseased site was confirmed with an 8-month cone beam computed tomography (CBCT) scan with no buccal bone resorption nor ridge collapse. The bone lid technique with a piezoelectric device was noninvasive and atraumatic in this case. Further studies are needed and could lead to the adaptation of this approach as a possible standard of care.
RESUMO
Specific staining of the extracellular matrix components is especially helpful in studying tissue remodeling, particularly in the case of connective tissue pathologies. As developed by Junqueira and colleagues in 1979, specific staining by Picrosirius red is one of the most important stains to study collagen networks in different tissues. Under polarized light, collagen bundles appear green, red or yellow, and are easily differentiated from the black background, thus allowing for quantitative morphometric analysis. As Junqueira and colleagues point out, many studies use color staining to differentiate collagen bundles and to specify collagen types, yet other studies report that polarized colors only reflect fiber thickness and packing. Using a simple histological example, our study illustrates the inability of Picrosirius red staining to differentiate collagen types, since the absorbed amount of polarized light by this dye strictly depends on the orientation of the collagen bundles.