RESUMO
The investigation of the effects of electrical and mechanical stimulations on chondrogenesis in tissue engineering scaffolds is essential for realizing successful cartilage repair and regeneration. The aim of articular cartilage tissue engineering is to enhance the function of damaged or diseased articular cartilage, which has limited regenerative capacity. Studies have shown that electrical stimulation (ES) promotes mesenchymal stem cell (MSC) chondrogenesis, while mechanical stimulation (MS) enhances the chondrogenic differentiation capacity of MSCs. Therefore, understanding the impact of these stimuli on chondrogenesis is crucial for researchers to develop more effective tissue engineering strategies for cartilage repair and regeneration. This study focuses on the preparation of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) conductive polymer (CP) scaffolds using the freeze-drying method. The scaffolds were fabricated with varying concentrations (0, 1, 3, and 10 wt %) of (3-glycidyloxypropyl) trimethoxysilane (GOPS) as a crosslinker and an additive to tailor the scaffold properties. To gain a comprehensive understanding of the material characteristics and the phase aggregation phenomenon of PEDOT:PSS scaffolds, the researchers performed theoretical calculations of solubility parameters and surface energies of PSS, PSS-GOPS, and PEDOT polymers, as well as conducted material analyses. Additionally, the study investigated the potential of promoting chondrogenic differentiation of human adipose stem cells by applying external ES or MS on a PEDOT:PSS CP scaffold. Compared to the group without stimulation, the group that underwent stimulation exhibited significantly up-regulated expression levels of chondrogenic characteristic genes, such as SOX9 and COL2A1. Moreover, the immunofluorescence staining images exhibited a more vigorous fluorescence intensity of SOX9 and COL II proteins that was consistent with the trend of the gene expression results. In the MS experiment, the strain excitation exerted on the scaffold was simulated and transformed into stress. The simulated stress response showed that the peak gradually decreased with time and approached a constant value, with the negative value of stress representing the generation of tensile stress. This stress response quantification could aid researchers in determining specific MS conditions for various materials in tissue engineering, and the applied stress conditions could be further optimized. Overall, these findings are significant contributions to future research on cartilage repair and biophysical ES/MS in tissue engineering.
Assuntos
Condrogênese , Alicerces Teciduais , Humanos , Condrogênese/fisiologia , Engenharia Tecidual/métodos , Polímeros/farmacologia , Células-Tronco , Diferenciação CelularRESUMO
With the advancements in tissue engineering and three-dimensional (3D) bioprinting, physiologically relevant three-dimensional structures with suitable mechanical and bioactive properties that mimic the biological tissue can be designed and fabricated. However, the available bioinks are less than demanded. In this research, the readily available biomass sources, keratin and glycol chitosan, were selected to develop a UV-curable hydrogel that is feasible for the 3D bioprinting process. Keratin methacrylate and glycol chitosan methacrylate were synthesized, and a hybrid bioink was created by combining this protein-polysaccharide cross-linked hydrogel. While human hair keratin could provide biological functions, the other composition, glycol chitosan, could further enhance the mechanical strength of the construct. The mechanical properties, degradation profile, swelling behavior, cell viability, and proliferation were investigated with various ratios of keratin methacrylate to glycol chitosan methacrylate. The composition of 2% (w/v) keratin methacrylate and 2% (w/v) chitosan methacrylate showed a significantly higher cell number and swelling percentage than other compositions and was designated as the bioink for 3D printing afterward. The feasibility of stem cell loading in the selected formula was examined with an extrusion-based bioprinter. The cells and spheroids can be successfully printed with the synthesized bioink into a specific shape and cultured. This work provides a potential option for bioinks and delivers insights into personalization research on stem cell-laden biofabricated hydrogels in the future.
Assuntos
Bioimpressão , Quitosana , Bioimpressão/métodos , Humanos , Hidrogéis/química , Queratinas , Metacrilatos , Impressão Tridimensional , Células-Tronco , Engenharia Tecidual/métodos , Alicerces Teciduais/químicaRESUMO
The development of optical organic nanoparticles (NPs) is desirable and widely studied. However, most organic dyes are water-insoluble such that the derivatization and modification of these dyes are difficult. Herein, we demonstrated a simple platform for the fabrication of organic NPs designed with emissive properties by loading ten different organic dyes (molar masses of 479.1-1081.7 g/mol) into water-soluble polymer nanosponges composed of poly(styrene-alt-maleic acid) (PSMA). The result showed a substantial improvement over the loading of commercial dyes (3.7-50% loading) while preventing their spontaneous aggregation in aqueous solutions. This packaging strategy includes our newly synthesized organic dyes (> 85% loading) designed for OPVs (242), DSSCs (YI-1, YI-3, YI-8), and OLEDs (ADF-1-3, and DTDPTID) applications. These low-cytotoxicity organic NPs exhibited tunable fluorescence from visible to near-infrared (NIR) emission for cellular imaging and biological tracking in vivo. Moreover, PSMA NPs loaded with designed NIR-dyes were fabricated, and photodynamic therapy with these dye-loaded PSMA NPs for the photolysis of cancer cells was achieved when coupled with 808 nm laser excitation. Indeed, our work demonstrates a facile approach for increasing the biocompatibility and stability of organic dyes by loading them into water-soluble polymer-based carriers, providing a new perspective of organic optoelectronic materials in biomedical theranostic applications.
Assuntos
Nanopartículas , Fotoquimioterapia , Corantes , Polímeros , ÁguaRESUMO
This chapter reviews the studies of keratin-based biomaterials in the past and discusses the advancement of it in recent years. Keratin, as a protein-based biopolymer, possesses excellent biocompatibility and biodegradability. In addition, keratin has abundant disulfide bonds, which result in its unique and tough structure. However, the property also results in dissolubility, which causes difficult process ability. Over the past years, much research utilizes different methodologies to extract keratins. Different kinds of extraction methods affect the characteristics of keratins and give a wide variety of application forms. The features of different methods are discussed and summarized in the following.
Assuntos
Materiais Biocompatíveis , Cabelo , Queratinas , Medicina Regenerativa/métodos , Humanos , Engenharia TecidualRESUMO
Emerging advances in iron oxide nanoparticles exploit their high magnetization for various applications, such as bioseparation, hyperthermia, and magnetic resonance imaging. In contrast to their excellent magnetic performance, the harmonic generation and luminescence properties of iron oxide nanoparticles have not been thoroughly explored, thus limiting their development as a tool in photomedicine. In this work, a seed/growth-inspired synthesis is developed combined with primary mineralization and a ligand-assisted secondary growth strategy to prepare mesostructured α-FeOOH nanorods (NRs). The sub-wavelength heterogeneity of the refractive index leads to enhanced third-harmonic generation (THG) signals under near-infrared excited wavelengths at 1230 nm. The as-prepared NRs exhibit an 11-fold stronger THG intensity compared to bare α-FeOOH NRs. Using these unique nonlinear optical properties, it is demonstrated that mesostructured α-FeOOH NRs can serve as biocompatible and nonbleaching contrast agents in THG microscopy for long-term labeling of cells as well as in angiography in vivo by modifying lectin to enhance the binding efficiency to the glycocalyx layers on the wall of blood vessels. These results provide a new insight into Fe-based nanoplatforms capable of emitting coherent light as molecular probes in optical microscopy, thus establishing a complementary microscopic imaging method for macroscopic magnetic imaging systems.
Assuntos
Imageamento Tridimensional , Compostos de Ferro/química , Minerais/química , Nanotubos/química , Células A549 , Animais , Sobrevivência Celular , Orelha/anatomia & histologia , Humanos , Camundongos Endogâmicos BALB C , Nanotubos/ultraestrutura , Dinâmica não LinearRESUMO
Microenvironmental factors including physical and chemical cues can regulate stem cells as well as terminally differentiated cells to modulate their biological function and differentiation. However, one of the physical cues, the substrate's dimensionality, has not been studied extensively. In this study, the ï¬ow-focusing method with a microï¬uidic device was used to generate gelatin bubbles to fabricate highly ordered three-dimensional (3D) scaffolds. Rat H9c2 myoblasts were seeded into the 3D gelatin bubble-based scaffolds and compared to those grown on 2D gelatin-coating substrates to demonstrate the influences of spatial cues on cell behaviors. Relative to cells on the 2D substrates, the H9c2 myoblasts were featured by a good survival and normal mitochondrial activity but slower cell proliferation within the 3D scaffolds. The cortical actin filaments of H9c2 cells were localized close to the cell membrane when cultured on the 2D substrates, while the F-actins distributed uniformly and occupied most of the cell cytoplasm within the 3D scaffolds. H9c2 myoblasts fused as multinuclear myotubes within the 3D scaffolds without any induction but cells cultured on the 2D substrates had a relatively lower fusion index even differentiation medium was provided. Although there was no difference in actin α 1 and myosin heavy chain 1, H9c2 cells had a higher myogenin messenger RNA level in the 3D scaffolds than those of on the 2D substrates. This study reveals that the dimensionality influences differentiation and fusion of myoblasts.
Assuntos
Diferenciação Celular , Proliferação de Células , Gelatina/química , Fibras Musculares Esqueléticas/metabolismo , Mioblastos/metabolismo , Alicerces Teciduais/química , Citoesqueleto de Actina/metabolismo , Animais , Fibras Musculares Esqueléticas/citologia , Mioblastos/citologia , RatosRESUMO
In designing biomaterial for regenerative medicine or tissue engineering, there are a variety of issues to consider including biocompatibility, biochemical reactivity, and cellular interaction etc. Mussel-inspired biomaterials have received much attention because of its appealing features including strong adhesiveness on moist surfaces, enhancement of cell adhesion, immobilization of bioactive molecules and its amenability to post-functionalization via catechol chemistry. In this review chapter, we give a brief introduction on the basic principles of mussel-inspired polydopamine coating, catechol conjugation, and discuss how their features play a vital role in biomedical application. Special emphasis is placed on tissue engineering and regenerative applications. We aspire to give readers of this book a comprehensive insight into mussel-inspired biomaterials that can facilitate them make significant contributions in this promising field.
Assuntos
Materiais Biocompatíveis , Bivalves , Engenharia Tecidual , Animais , Adesão Celular , Humanos , Medicina RegenerativaRESUMO
Despite the controversy in mechanism, rodent and clinical studies have demonstrated beneficial effects of stem/progenitor cell therapy after myocardial infarction (MI). In a rat ischaemic reperfusion MI model, we investigated the effects of immunomodification of CD 34(+) cells on heart function and myocardial conduction. Bispecific antibody (BiAb), consisting of an anti-myosin light chain antibody and anti-CD45 antibody, injected intravenously was used to direct human CD34(+) cells to injured myocardium. Results were compared to echocardiography guided intramyocardial (IM) injection of CD34(+) cells and PBS injected intravenously. Treatment was administered 2 days post MI. Echocardiography was performed at 5 weeks and 3 months which demonstrated LV dilatation prevention and fractional shortening improvement in both the BiAb and IM injection approaches, with BiAb achieving better results. Histological analyses demonstrated a decrease in infarct size and increase in arteriogenesis in both BiAb and IM injection. Electrophysiological properties were studied 5 weeks after treatments by optical mapping. Conduction velocity (CV), action potential duration (APD) and rise time were significantly altered in the MI area. The BiAb treated group demonstrated a more normalized activation pattern of conduction and normalization of CV at shorter pacing cycle lengths. The ventricular tachycardia inducibility was lowest in the BiAb treatment group. Intravenous administration of BiAb offers an effective means of stem cell delivery for myocardial repair post-acute MI. Such non-invasive approach was shown to offer a distinct advantage to more invasive direct IM delivery.
Assuntos
Miocárdio/patologia , Transplante de Células-Tronco , Células-Tronco/imunologia , Animais , Anticorpos Biespecíficos/metabolismo , Antígenos CD34/metabolismo , Feminino , Sistema de Condução Cardíaco/fisiopatologia , Testes de Função Cardíaca , Humanos , Injeções , Cinética , Infarto do Miocárdio/diagnóstico por imagem , Infarto do Miocárdio/imunologia , Infarto do Miocárdio/fisiopatologia , Infarto do Miocárdio/terapia , Neovascularização Fisiológica , Ligação Proteica , Ratos Nus , Período Refratário Eletrofisiológico , Taquicardia Ventricular/fisiopatologia , UltrassonografiaRESUMO
In this study, 3D culture system for human adipose-derived stem cell (hASC) using a BioLevitator as the bioreactor for microcarrier-based cultures was established. During the culturing period, hASCs preferred to grow in crevices between microcarriers and a high viability was maintained even when reaching confluency. Adipogenic or osteogenic differential medium was used to induce hASCs and differential potentials of these cells were compared between 2D and 3D environments via RT-PCR and staining quantifications. CEBP/α gene expression was significant higher in 3D condition at day 21 (P < 0.05). Staining quantification indicates that cells cultured in 3D condition have significant better differentiation potential from day 14 to 21 for both adipogenic and osteogenic lineages (P < 0.01).
Assuntos
Técnicas de Cultura de Células/métodos , Diferenciação Celular , Células-Tronco/fisiologia , Tecido Adiposo/citologia , Reatores Biológicos , Sobrevivência Celular , Humanos , Células-Tronco/citologiaRESUMO
In recent years, the development of biodegradable hydrogels as an alternative over the traditional wound dressing has become increasingly significant. These specific hydrogels are able to offer suitable microenvironments to further aid the process of tissue or organ regeneration. However, application of biodegradable hydrogels in clinical medicine remains uncommon due to most biodegradable hydrogels struggle with achieving satisfactory adhesiveness property, high mechanical support and cell compatibility simultaneously. In order to overcome these constraints and enhance the applicability of biodegradable hydrogels, methods have been employed in this study. By reacting gellan gum with methacrylic anhydride and incorporating a biodegradable protein, keratin, we endowed the hydrogels with high pliability via photo-polymerization chain extension, thereby obtaining a biodegradable hydrogel with exceptional properties. Through a series of in vitro tests, GGMA/keratin hydrogels exhibited great cell compatibility via providing an appropriate environment for cell proliferation. Furthermore, this hydrogel not only exhibits extraordinary adhesive ability on visceral tissues but also extends to scenarios involving skin or organ damage, offering valuable assistance in wound healing. Our design provides a suitable platform for cell proliferation and tissue regeneration, which shows prospects for future medical research and clinical applications.
RESUMO
In pursuing sustainable thermal insulation solutions, this study explores the integration of human hair and feather keratin with alginate. The aim is to assess its potential in thermal insulation materials, focusing on the resultant composites' thermal and mechanical characteristics. The investigation uncovers that the type and proportion of keratin significantly influence the composites' porosity and thermal conductivity. Specifically, higher feather keratin content is associated with lesser sulfur and reduced crosslinking due to shorter amino acids, leading to increased porosity and pore sizes. This, in turn, results in a decrease in ß-structured hydrogen bond networks, raising non-ordered protein structures and diminishing thermal conductivity from 0.044 W/(m·K) for pure alginate matrices to between 0.033 and 0.038 W/(m·K) for keratin-alginate composites, contingent upon the specific ratio of feather to hair keratin used. Mechanical evaluations further indicate that composites with a higher ratio of hair keratin exhibit an enhanced compressive modulus, ranging from 60 to 77 kPa, demonstrating the potential for tailored mechanical properties to suit various applications. The research underscores the critical role of sulfur content and the crosslinking index within keratin's structures, significantly impacting the thermal and mechanical properties of the matrices. The findings position keratin-based composites as environmentally friendly alternatives to traditional insulation materials.
Assuntos
Plumas , Cabelo , Queratinas , Condutividade Térmica , Queratinas/química , Plumas/química , Cabelo/química , Humanos , Alginatos/química , PorosidadeRESUMO
Reactive oxygen species (ROS) have been recognized as prevalent contributors to the development of inner retinal injuries including optic neuropathies such as glaucoma, non-arteritic anterior ischemic optic neuropathy, traumatic optic neuropathy, and Leber hereditary optic neuropathy, among others. This underscores the pivotal significance of oxidative stress in the damage inflicted upon retinal tissue. To combat ROS-related challenges, this study focuses on creating an injectable and tissue-adhesive hydrogel with tailored antioxidant properties for retinal applications. GelCA, a gelatin-modified hydrogel with photo-crosslinkable and injectable properties, is developed. To enhance its antioxidant capabilities, curcumin-loaded polydopamine nanoparticles (Cur@PDA NPs) are incorporated into the GelCA matrix, resulting in a multifunctional nanocomposite hydrogel referred to as Cur@PDA@GelCA. This hydrogel exhibits excellent biocompatibility in both in vitro and in vivo assessments, along with enhanced tissue adhesion facilitated by NPs in an in vivo model. Importantly, Cur@PDA@GelCA demonstrates the potential to mitigate oxidative stress when administered via intravitreal injection in retinal injury models such as the optic nerve crush model. These findings underscore its promise in advancing retinal tissue engineering and providing an innovative strategy for acute neuroprotection in the context of inner retinal injuries.
Assuntos
Antioxidantes , Adesivos Teciduais , Nanogéis , Espécies Reativas de Oxigênio , Retina , HidrogéisRESUMO
Thrombosis, characterized by blood clot formation within vessels, poses a significant medical challenge. Despite extensive research, the development of effective thrombosis therapies is hindered by substantial costs, lengthy development times, and high failure rates in medication commercialization. Conventional pre-clinical models often oversimplify cardiovascular disease, leading to a disparity between experimental results and human physiological responses. In response, we have engineered a photothrombosis-on-a-chip system. This microfluidic model integrates human endothelium, human whole blood, and blood flow dynamics and employs the photothrombotic method. It enables precise, site-specific thrombus induction through controlled laser irradiation, effectively mimicking both normal and thrombotic physiological conditions on a single chip. Additionally, the system allows for the fine-tuning of thrombus occlusion levels via laser parameter adjustments, offering a flexible thrombus model with varying degrees of obstruction. Additionally, the formation and progression of thrombosis noted on the chip closely resemble the thrombotic conditions observed in mice in previous studies. In the experiments, we perfused recalcified whole blood with Rose Bengal into an endothelialized microchannel and initiated photothrombosis using green laser irradiation. Various imaging methods verified the model's ability to precisely control thrombus formation and occlusion levels. The effectiveness of clinical drugs, including heparin and rt-PA, was assessed, confirming the chip's potential in drug screening applications. In summary, the photothrombosis-on-a-chip system significantly advances human thrombosis modeling. Its precise control over thrombus formation, flexibility in the thrombus severity levels, and capability to simulate dual physiological states on a single platform make it an invaluable tool for targeted drug testing, furthering the development of organ-on-a-chip drug screening techniques.
Assuntos
Dispositivos Lab-On-A-Chip , Trombose , Humanos , Lasers , Técnicas Analíticas Microfluídicas/instrumentação , Animais , Rosa BengalaRESUMO
Hydrogels have been demonstrated as smart drug carriers to recognize the tumor microenvironment for cancer treatment, where the dynamic crosslinks in the hydrogel network contribute to the stimuli-responsive features but also result in poor stability and weak mechanical property of the hydrogels. Here, phenylboronic acid-grafted polyethyleneimine (PBA-PEI)-modified gelatin (PPG) was synthesized to crosslink alginate dialdehyde (ADA) through imine bonds and boronate ester bonds, and then calcium ions (Ca2+) were added to introduce the third calcium-carboxylate crosslinking in the network to form the triple-crosslinked PPG/ADA-Ca2+ hydrogels. Given the three types of dynamic bonds in the network, PPG/ADA-Ca2+ hydrogels possessed a self-healing manner, stimuli-responsiveness, and better mechanical properties compared to single- or double-crosslinked hydrogels. The controlled release capability of PPG/ADA-Ca2+ hydrogels was also demonstrated, showing the encapsulated molecules can be rapidly released from the hydrogel network in the presence of hydrogen peroxide while the release rate can be slowed down at acidic pH. Furthermore, PPG/ADA-Ca2+ hydrogels presented selected cytotoxicity and drug delivery to cancer cells due to the regulated degradation by the cellular microenvironment. Taken together, PPG/ADA-Ca2+ hydrogels have been demonstrated as promising biomaterials with multiple desirable properties and dynamic features to perform controlled molecule release for biomedical applications.
RESUMO
In preclinical studies, human hair has demonstrated effective hemostatic properties, potentially attributed to keratin proteins facilitating rapid conversion of fibrinogen to fibrin during coagulation. However, the rational use of human hair keratin for hemostasis remains unclear, given its complex mixture of proteins with diverse molecular weights and structures, leading to variable hemostatic capacity. To optimize the rational utilization of human hair keratin for hemostasis, we investigated the effects of different keratin fractions on keratin-mediated fibrinogen precipitation using a fibrin generation assay. Our study focused on high molecular weight keratin intermediate filaments (KIFs) and lower molecular weight keratin-associated proteins (KAPs) combined in various ratios during the fibrin generation. Scanning electron microscope analysis of the precipitates revealed a filamentous pattern with a broad distribution of fiber diameters, likely due to the diversity of keratin mixtures involved. An equal proportion of KIFs and KAPs in the mixture yielded the most extensive precipitation of soluble fibrinogen in an in vitro study, potentially due to structure-induced exposure of active sites. However, all hair protein samples exhibited diverse catalytic behaviors compared to thrombin, highlighting the potential of utilizing specific hair fractions to develop hair protein-based hemostatic materials with optimized capacity.
Assuntos
Hemostáticos , Humanos , Hemostáticos/farmacologia , Fibrinogênio/química , Queratinas Específicas do Cabelo , Hemostasia , Fibrina/químicaRESUMO
BACKGROUND: Diabetes mellitus deteriorates the destruction and impairs the healing of periodontal wounds and craniofacial defects. This study is to evaluate the potential of self-assembled adipose-derived stem cell spheroids (ADsp) in microbial transglutaminase cross-linked gelatin hydrogel (mTG) for treating diabetic periodontal wounds and craniofacial defects. METHODS: Human adipose-derived stem cells (ADSCs) were isolated by lipoaspiration, pluripotent genes and trilineage differentiation were examined, and the maintenance of ADsp properties in mTG was verified. Oral mucosal wounds and calvarial osseous defects were created in diabetic rats. Gross observation, histologic evaluation, and immunohistochemistry for proliferating cells and keratinization were conducted in the mucosal wounds within 4-28 days. Micro-CT imaging, histologic evaluation, and immunohistochemistry for proliferating cells and osteogenic differentiation were conducted in the osseous defects at 7 and 28 days. RESULTS: ADSCs expressed pluripotent genes and were capable of trilineage differentiation. ADsp retained morphology and stemness in mTG. In diabetic mucosal wounds, wound closure, epithelization, and keratinization were accelerated in those with ADsp and ADsp-mTG. In diabetic osseous defects, osteogenic differentiation markers were evidently expressed, cell proliferation was promoted from day 7, and bone formation was significantly promoted at day 28 in those with osteogenically pretreated ADsp-mTG. CONCLUSIONS: ADsp-mTG accelerated diabetic oral mucosal wound healing, and osteogenically pretreated ADsp-mTG promoted diabetic osseous defect regeneration, proving that ADsp-mTG facilitated diabetic periodontal wound healing and craniofacial osseous defect regeneration.
Assuntos
Diabetes Mellitus Experimental , Hidrogéis , Ratos , Humanos , Animais , Hidrogéis/química , Gelatina , Transglutaminases/genética , Osteogênese , Tecido Adiposo , Células-TroncoRESUMO
BACKGROUND: Alveolar mucosa could be a promising source of mesenchymal stem cells (MSCs) for regeneration therapeutics because it exhibits faster healing potential and can be easily collected with minimal periodontal disturbance. This study aimed to evaluate the potential of alveolar mucosal cell (AMC) spheroids for promoting extraction socket healing and calvarial osseous defect regeneration. METHODS: AMCs were isolated from Sprague-Dawley rats. Antigenic and MSC surface marker expressions and trilineage differentiation capability were assessed. AMCs were then osteogenically stimulated (OAs) or unstimulated (UAs), self-aggregated to form spheroids, and encapsulated in gelatin hydrogel to fill rat extraction sockets or combined with freeze-dried bone graft (FDBG) to fill rat calvarial osseous defects. The outcome was assessed by gross observation, micro-CT imaging, and immunohistochemistry. RESULTS: AMCs highly expressed MSC surface markers, showed weak antigenicity, and were capable of trilineage differentiation at Passage 3. In the extraction sockets, wound closure, socket fill, keratinization, and proliferative activities were accelerated in those with AMC spheroids treatment. Socket fill and maturation were further promoted by OA spheroids. In the calvarial osseous defects, the mineralized tissue ratio was promoted with AMC spheroids/FDBG treatment, and bone sialoprotein expression and cell proliferation were more evident with OA spheroids/FDBG treatment. CONCLUSION: AMCs exhibited MSC properties with weak antigenicity. AMC spheroids promoted extraction socket healing, AMC spheroids/FDBG promoted calvarial osseous defect regeneration, and the outcomes were further enhanced by osteogenically stimulation of AMCs.
RESUMO
Electric cell-substrate impedance sensing (ECIS) is an innovative approach for the label-free and real-time detection of cell morphology, growth, and apoptosis, thereby playing an essential role as both a viable alternative and valuable complement to conventional biochemical/pharmaceutical analysis in the field of diagnostics. Constant improvements are naturally sought to further improve the effective range and reliability of this technology. In this study, we developed poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) conducting polymer (CP)-based bioelectrodes integrated into homemade ECIS cell-culture chamber slides for the simultaneous drug release and real-time biosensing of cancer cell viability under drug treatment. The CP comprised tailored PEDOT:PSS, poly(ethylene oxide) (PEO), and (3-glycidyloxypropyl)trimethoxysilane (GOPS) capable of encapsulating antitumor chemotherapeutic agents such as doxorubicin (DOX), docetaxel (DTX), and a DOX/DTX combination. This device can reliably monitor impedance signal changes correlated with cell viability on chips generated by cell adhesion onto a predetermined CP-based working electrode while simultaneously exhibiting excellent properties for both drug encapsulation and on-demand release from another CP-based counter electrode under electrical stimulation (ES) operation. Cyclic voltammetry curves and surface profile data of different CP-based coatings (without or with drugs) were used to analyze the changes in charge capacity and thickness, respectively, thereby further revealing the correlation between their drug-releasing performance under ES operation (determined using ultraviolet-visible (UV-vis) spectroscopy). Finally, antitumor drug screening tests (DOX, DTX, and DOX/DTX combination) were performed on MCF-7 and HeLa cells using our developed CP-based ECIS chip system to monitor the impedance signal changes and their related cell viability results.
Assuntos
Doxorrubicina , Humanos , Impedância Elétrica , Células HeLa , Liberação Controlada de Fármacos , Reprodutibilidade dos Testes , Doxorrubicina/farmacologiaRESUMO
Introduction: Cisplatin, a commonly used anticancer compound, exhibits severe off-target organ toxicity. Due to its wide application in cancer treatment, the reduction of its damage to normal tissue is an imminent clinical need. Cisplatin-induced testicular oxidative stress and damage lead to male sub- or infertility. Despite earlier studies showing that the natural polyphenol extracts honokiol serve as the free radical scavenger that reduces the accumulation of intracellular free radicals, whether honokiol exhibits direct effects on the testis and sperm is unclear. Thus, the aim of the current study is to investigate the direct effects of honokiol on testicular recovery and sperm physiology. Methods: We encapsulated this polyphenol antioxidation compound into liposome-based nanoparticles (nHNK) and gave intraperitoneally to mice at a dosage of 5 mg/kg body mass every other day for consecutive 6 weeks. Results: We showed that nHNK promotes MDC1-53bp1-associated non-homologous DNA double-strand break repair signaling pathway that minimizes cisplatin-induced DNA damage. This positive effect restores spermatogenesis and allows the restructuring of the multi-spermatogenic layers in the testis. By reducing mitochondrial oxidative damage, nHNK also protects sperm mitochondrial structure and maintains both testicular and sperm ATP production. By a yet-to-identify mechanism, nHNK restores sperm calcium influx at the sperm midpiece and tail, which is essential for sperm hypermotility and their interaction with the oocyte. Discussion: Taken together, the nanoparticulated antioxidant counteracts cisplatin-induced male fertility defects and benefits patients undertaking cisplatin-based chemotherapy. These data may allow the reintroduction of cisplatin for systemic applications in patients at clinics with reduced testicular toxicity.
Assuntos
Antioxidantes , Nanopartículas , Masculino , Camundongos , Animais , Antioxidantes/farmacologia , Antioxidantes/metabolismo , Cisplatino/farmacologia , Cálcio/metabolismo , Sêmen/metabolismo , Espermatozoides , Testículo , Reparo do DNA , Estresse Oxidativo , FertilidadeRESUMO
Thrombolytic and antithrombotic therapies are limited by short circulation time and the risk of off-target hemorrhage. Integrating a thrombus-homing strategy with photothermal therapy are proposed to address these limitations. Using glycol chitosan, polypyrrole, iron oxide and heparin, biomimicking GCPIH nanoparticles are developed for targeted thrombus delivery and thrombolysis. The nanoassembly achieves precise delivery of polypyrrole, exhibiting biocompatibility, selective accumulation at multiple thrombus sites, and enhanced thrombolysis through photothermal activation. To simulate targeted thrombolysis, a microfluidic model predicting thrombolysis dynamics in realistic pathological scenarios is designed. Human blood assessments validate the precise homing of GCPIH nanoparticles to activated thrombus microenvironments. Efficient near-infrared phototherapeutic effects are demonstrated at thrombus lesions under physiological flow conditions ex vivo. The combined investigations provide compelling evidence supporting the potential of GCPIH nanoparticles for effective thrombus therapy. The microfluidic model also offers a platform for advanced thrombolytic nanomedicine development.