High-throughput multiplex assays with mouse macrophages on pillar plate platforms.

It is challenging to rapidly identify immune responses that reflect the state and capability of immune cells due to complex heterogeneity of immune cells and their plasticity to pathogens and modulating molecules. Thus, high-throughput and easy-to-use cell culture and analysis platforms are highly desired for characterizing complex immune responses and elucidating their underlying mechanisms as well. In response to this need, we have developed a micropillar chip and a 384-pillar plate, printed mouse macrophage, RAW 264.7 cell line in alginate on the pillar plate platforms, and established multiplex cell-based assays to rapidly measure cell viability, expression of cell surface markers, and secretion of cytokines upon stimulation with model compound, lipopolysaccharide (LPS), as well as synthetic N-glycan polymers that mimic native glycoconjugates and could bind to lectin receptors on RAW 264.7 cells. Interestingly, changes in RAW 264.7 cell viability, expression levels of cell surface makers, and release of cytokines measured from the pillar plate platforms in the presence and absence of LPS were well correlated with those obtained from their counterpart, the 96-well plate with 2D-cultured macrophages. With this approach, we identified that α2,3-linked N-sialyllactose polymer has significant macrophage modulation activity among the N-glycan polymers tested. Therefore, we successfully demonstrated that our pillar plate platforms with 3D-cultured macrophages can streamline immune cell imaging and analysis in high throughput in response to compound stimulation. We envision that the pillar plate platforms could potentially be used for rapid characterization of immune cell responses and for screening immune cell-modulating molecules.

3D-cultured neural stem cell microarrays on a micropillar chip for high-throughput developmental neurotoxicology.

Numerous chemicals including environmental toxicants and drugs have not been fully evaluated for developmental neurotoxicity. A key gap exists in the ability to predict accurately and robustly in vivo outcomes based on in vitro assays. This is particularly the case for predicting the toxicity of chemicals on the developing human brain. A critical need for such in vitro assays is choice of a suitable model cell type. To that end, we have performed high-throughput in vitro assessment of proliferation and differentiation of human neural stem cells (hNSCs). Conventional in vitro assays typically use immunofluorescence staining to quantify changes in cell morphology and expression of neural cell-specific biomarkers, which is often time-consuming and subject to variable specificities of available antibodies. To alleviate these limitations, we developed a miniaturized, three-dimensional (3D) hNSC culture with ReNcell VM on microarray chip platforms and established a high-throughput promoter-reporter assay system using recombinant lentiviruses on hNSC spheroids to assess cell viability, self-renewal, and differentiation. Optimum cell viability and spheroid formation of 3D ReNcell VM culture were observed on a micropillar chip over a period of 9 days in a mixture of 0.75% (w/v) alginate and 1 mg/mL growth factor reduced (GFR) Matrigel with 25 mM CaCl2 as a crosslinker for alginate. In addition, 3D ReNcell VM culture exhibited self-renewal and differentiation on the microarray chip platform, which was efficiently monitored by enhanced green fluorescent protein (EGFP) expression of four NSC-specific biomarkers including sex determining region Y-box 2 (SOX2), glial fibrillary acidic protein (GFAP), synapsin1, and myelin basic protein (MBP) with the promoter-reporter assay system.

High-throughput metabolism-induced toxicity assays demonstrated on a 384-pillar plate.

The US Environmental Protection Agency (EPA) launched the Transform Tox Testing Challenge in 2016 with the goal of developing practical methods that can be integrated into conventional high-throughput screening (HTS) assays to better predict the toxicity of parent compounds and their metabolites in vivo. In response to this need and to retrofit existing HTS assays for assessing metabolism-induced toxicity of compounds, we have developed a 384-pillar plate that is complementary to traditional 384-well plates and ideally suited for culturing human cells in three dimensions at a microscale. Briefly, human embryonic kidney (HEK) 293 cells in a mixture of alginate and Matrigel were printed on the 384-pillar plates using a microarray spotter, which were coupled with 384-well plates containing nine model compounds provided by the EPA, five representative Phase I and II drug metabolizing enzymes (DMEs), and one no enzyme control. Viability and membrane integrity of HEK 293 cells were measured with the calcein AM and CellTiter-Glo® kit to determine the IC50 values of the nine parent compounds and DME-generated metabolites. The Z' factors and the coefficient of variation measured were above 0.6 and below 14%, respectively, indicating that the assays established on the 384-pillar plate are robust and reproducible. Out of nine compounds tested, six compounds showed augmented toxicity with DMEs and one compound showed detoxification with a Phase II DME. This result indicates that the 384-pillar plate platform can be used to measure metabolism-induced toxicity of compounds in high-throughput with individual DMEs. As xenobiotics metabolism is a complex process with a variety of DMEs involved, the predictivity of our approach could be further improved with mixtures of DMEs.

Prediction of metabolism-induced hepatotoxicity on three-dimensional hepatic cell culture and enzyme microarrays.

Human liver contains various oxidative and conjugative enzymes that can convert nontoxic parent compounds to toxic metabolites or, conversely, toxic parent compounds to nontoxic metabolites. Unlike primary hepatocytes, which contain myriad drug-metabolizing enzymes (DMEs), but are difficult to culture and maintain physiological levels of DMEs, immortalized hepatic cell lines used in predictive toxicity assays are easy to culture, but lack the ability to metabolize compounds. To address this limitation and predict metabolism-induced hepatotoxicity in high-throughput, we developed an advanced miniaturized three-dimensional (3D) cell culture array (DataChip 2.0) and an advanced metabolizing enzyme microarray (MetaChip 2.0). The DataChip is a functionalized micropillar chip that supports the Hep3B human hepatoma cell line in a 3D microarray format. The MetaChip is a microwell chip containing immobilized DMEs found in the human liver. As a proof of concept for generating compound metabolites in situ on the chip and rapidly assessing their toxicity, 22 model compounds were dispensed into the MetaChip and sandwiched with the DataChip. The IC50 values obtained from the chip platform were correlated with rat LD50 values, human C max values, and drug-induced liver injury categories to predict adverse drug reactions in vivo. As a result, the platform had 100% sensitivity, 86% specificity, and 93% overall predictivity at optimum cutoffs of IC50 and C max values. Therefore, the DataChip/MetaChip platform could be used as a high-throughput, early stage, microscale alternative to conventional in vitro multi-well plate platforms and provide a rapid and inexpensive assessment of metabolism-induced toxicity at early phases of drug development.

Cigarette Smoking Condensate Disrupts Endoplasmic Reticulum-Golgi Network Homeostasis Through GOLPH3 Expression in Normal Lung Epithelial Cells.

INTRODUCTION: Cigarette smoke (CS) is associated with a broad range of diseases including lung cancer. Many researchers have suggested that cigarette smoke condensate (CSC) may be more toxic compared to cigarette smoke extract (CSE) because CSC contains the lipid-soluble faction of smoke while CSE contains the hydrophilic or gas phase. The aim of this research is to investigate the effects of CSC on the disruption of endoplasmic reticulum (ER)-Golgi homeostasis in normal lung epithelial cells. METHODS: CS was generated according to the ISO 3308 method. To ascertain the mechanistic effects of CSC on lung toxicity, normal lung epithelial cells of the cell line 16HBE14o- were treated with CSC (0.1mg/mL) for 48 hours. The toxic effects of CSC on ER-Golgi homeostasis and GOLPH3 expression were observed through diverse molecular tools including transmission electron microscope analysis. RESULTS: Our results demonstrated that CSC treatment increased reactive oxygen species generation in lung cells and led to the alteration of ER-Golgi homeostasis in conjunction with increased autophagy. In particular, GOLPH3, known as an oncogene and a marker protein for the trans-Golgi network, was upregulated in CSC-treated cells. GOLPH3 protein overexpression was also confirmed in the lungs of human lung cancer patients as well as NNK-treated mice. CONCLUSION: Our study revealed that CSC caused lung damage through the disruption of ER-Golgi homeostasis and autophagy induction. The expression level of the trans-Golgi marker protein GOLPH3 could serve as a reliable bio-indicator for CS-related lung cancer. IMPLICATIONS: CS is a harmful factor in the development of many diseases including cancer. In this research, we demonstrated that CSC treatment led to malfunction of the ER-Golgi network, with the disrupted ER and Golgi causing GOLPH3 overexpression and abnormal autophagy accumulation. In addition, although the value of GOLPH3 as a predictor remains to be fully elucidated, our data suggest that GOLPH3 levels may be a novel prognostic biomarker of tobacco related lung disease.

Dihydroergotamine Tartrate Induces Lung Cancer Cell Death through Apoptosis and Mitophagy.

BACKGROUND: Mitochondria have emerged as a major target for anticancer therapy because of their critical role in cancer cell survival. Our preliminary works have suggested that dihydroergotamine tartrate (DHE), an antimigraine agent, may have effects on mitochondria. METHODS: We examined the effect of DHE on the survival of several lung cancer cells and confirmed that DHE suppressed diverse lung cancer cell growth effectively. To confirm whether such effects of DHE would be associated with mitochondria, A549 cells were employed for the evaluation of several important parameters, such as membrane potential, reactive oxygen species (ROS) generation, apoptosis, ATP production and autophagy. RESULTS: DHE decreased membrane permeability, increased ROS generation as well as apoptosis, and disturbed ATP production. Eventually, mitophagy was activated for damaged mitochondria. CONCLUSION: Taken together, our findings demonstrate that DHE induces lung cancer cell death by the induction of apoptosis and mitophagy, thus suggesting that DHE can be developed as an anti-lung cancer therapeutic agent.

Physicochemical determinants of multiwalled carbon nanotubes on cellular toxicity: influence of a synthetic method and post-treatment.

Since the discovery of carbon nanotubes (CNTs), scientists have performed extensive studies on nanotubes in the fields of materials science, physics, and electronic engineering. Because multiwalled CNTs (MWCNTs) are not homogeneous materials, and because it is not feasible to test every newly synthesized MWCNT, this study was aimed at investigating the physicochemical properties that primarily determine the cellular toxicity of MWCNTs. This study analyzed the relationship between cell viability and physicochemical characteristics following exposure to eight different MWCNTs. We generated eight different MWCNTs using various synthetic methods and post-treatments. From this analysis, we sought to identify the major physicochemical determinants that could predict the cellular toxicity of MWCNTs, regardless of the synthetic method and post-treatment conditions. Creation of binding sites on the tube walls by breaking C-C bonds played a pivotal role in increasing toxicity and was most clearly demonstrated by a Raman G peak shift and the ID/IG ratio. In addition, several factors were found to be strongly related to cellular toxicity: surface charge in the case of MWCNTs created by the chemical vapor deposition method and surface area and EPR intensity in the case of MWCNTs created by the arc discharge based method. The methods developed in this study could be applied to the prediction of the toxicity of newly synthesized MWCNTs.

GOLGA2/GM130, cis-Golgi matrix protein, is a novel target of anticancer gene therapy.

Achievement of long-term survival of patients with lung cancer treated with conventional chemotherapy is still difficult for treatment of metastatic and advanced tumors. Despite recent progress in investigational therapies, survival rates are still disappointingly low and novel adjuvant and systemic therapies are urgently needed. A recently elucidated secretory pathway is attracting considerable interest as a promising anticancer target. The cis-Golgi matrix protein, GOLGA2/GM130, plays an important role in glycosylation and transport of protein in the secretory pathway. In this study, the effects of short hairpin RNA (shRNA) constructs targeting GOLGA2/GM130 (shGOLGA2) on autophagy and lung cancer growth were evaluated in vitro and in vivo. Downregulation of GOLGA2/GM130 led to induction of autophagy and inhibition of glycosylation in A549 cells and in the lungs of K-ras(LA1) mice. Furthermore, downregulation of GOLGA2/GM130 decreased angiogenesis and cancer cell invasion in vitro and suppressed tumorigenesis in lung cancer mice model. The tumor specificity of sequence targeting GOLGA2/GM130 was also demonstrated. Taken together, these results suggest that induction of autophagy by shGOLGA2 may induce cell death rather than cell survival. Therefore, downregulation of GOLGA2/GM130 may be a potential therapeutic option for lung cancer.

Differential toxic responses between pristine and functionalized multiwall nanotubes involve induction of autophagy accumulation in murine lung.

Carbon nanotubes (CNT) are becoming commonly used in industrial applications. However, the toxicity associated with this material remains to be established. The aim of this study was to investigate the potential toxic mechanisms associated with multiwall carbon nanotubes (MWCNT) in normal mouse lung. A total of 100 µg of two types of MWCNT, namely, pristine MWCNT (PMWCNT) and acid-treated-MWCNT (TMWCNT), was administered to male C57BL/6 mice via intratracheal (IT) instillation for a period of 6 mo. Our results indicated that PMWCNT induced pulmonary autophagy accumulation and resulted in more potent tumorigenic effects compared to TMWCNT. Accordingly, MWCNT may exert differential toxicity attributed to various physicochemical properties. Data emphasize the need for careful regulation of production and use of CNT.

High-Throughput Assessment of Metabolism-Induced Toxicity of Compounds on a 384-Pillar Plate.

A variety of oxidative and conjugative enzymes are involved in the metabolism of compounds including drugs, which can be converted into toxic metabolites by Phase I drug-metabolizing enzymes (DMEs), such as the cytochromes P450 (CYP450s), and/or detoxified by Phase II DMEs, such as UDP-glucuronosyltransferases (UGTs), sulfotransferases (SULTs), and glutathione S-transferases (GSTs). Traditionally, primary hepatocytes containing a complete set of DMEs have been widely used as a gold standard to assess metabolism-induced compound toxicity. However, primary hepatocytes are expensive, have high donor variability in expression levels of DMEs, and rapidly lose liver-specific functions when the cells are maintained under standard in vitro cell culture conditions over time. To address this issue and rapidly profile metabolism-induced drug toxicity, we have developed a 384-pillar plate, which is complementary to conventional 384-well plates. In this chapter, we provide step-by-step procedures for three-dimensional (3D) cell printing on the 384-pillar plate coupled with DMEs and compounds in the 384-well plate for high-throughput assessment of metabolism-induced toxicity.

High-content imaging of 3D-cultured neural stem cells on a 384-pillar plate for the assessment of cytotoxicity.

The assessment of neurotoxicity has been performed traditionally with animals. However, in vivo studies are highly expensive and time-consuming, and often do not correlate to human outcomes. Thus, there is a need for cost-effective, high-throughput, highly predictive alternative in vitro test methods based on early markers of mechanisms of toxicity. High-content imaging (HCI) assays performed on three-dimensionally (3D) cultured cells could provide better understanding of the mechanism of toxicity needed to predict neurotoxicity in humans. However, current 3D cell culture systems lack the throughput required for screening neurotoxicity against a large number of chemicals. Therefore, we have developed miniature 3D neural stem cell (NSC) culture on a unique 384-pillar plate, which is complementary to conventional 384-well plates. Mitochondrial membrane impairment, intracellular glutathione level, cell membrane integrity, DNA damage, and apoptosis have been tested against 3D-cultured ReNcell VM on the 384-pillar plate with four model compounds rotenone, 4-aminopyridine, digoxin, and topotecan. The HCI assays performed in 3D-cultured ReNcell VM on the 384-pillar plates were highly robust and reproducible as indicated by the average Z' factor of 0.6 and CV values around 12%. From concentration-response curves and IC50 values, mitochondrial membrane impairment appears to be the early stage marker of cell death by the compounds.

Serum immunoglobulin fused interferon-alpha inhibited tumor growth in athymic mice bearing colon 26 adenocarcinoma cells.

Interferon (IFN) has therapeutic potential for a wide range of infectious and proliferative disorders. However, the half-life of IFN is too short to have a stable therapeutic effect. To overcome this problem, serum immunoglobulin has been fused to IFN. In this study, the efficacy of serum immunoglobulin fused INFs (si-IFN1 and si-IFN2) was evaluated on athymic mice bearing colon 26 adenocarcinoma cells. Seven days after the implantation of tumor cells, each group of mice was injected once a week with si-IFN1 and si-IFN2 at two different concentrations (10 x : 30 microg/kg and 50 x : 150 microg/kg). A slight anti-tumoral effect was observed in all 10 x groups compared to the control. In the 50 x groups, however, si-IFN1 and si-IFN2 showed significant anti- tumoral effects compared to the control. To gain more information on the mechanisms associated with the decrease of tumor size, a Western blot assay of apoptosis-related molecules was performed. The protein expression of cytochrome c, caspase 9, 6, and 3 were increased by si-IFN1 and si-IFN2. These 2 IFNs also increased the expressions of p53, p21, Bax and Bad. Interestingly, si-IFN1 and si-IFN2 decreased the expression of VEGF-beta. Taken together, serum immunoglobulin fused IFNs increased therapeutic efficacy under current experimental condition.

High-content imaging assays on a miniaturized 3D cell culture platform.

The majority of high-content imaging (HCI) assays have been performed on two-dimensional (2D) cell monolayers for its convenience and throughput. However, 2D-cultured cell models often do not represent the in vivo characteristics accurately and therefore reduce the predictability of drug toxicity/efficacy in vivo. Recently, three-dimensional (3D) cell-based HCI assays have been demonstrated to improve predictability, but its use is limited due to difficulty in maneuverability and low throughput in cell imaging. To alleviate these issues, we have developed miniaturized 3D cell culture on a micropillar/microwell chip and demonstrated high-throughput HCI assays for mechanistic toxicity. Briefly, Hep3B human hepatoma cell line was encapsulated in a mixture of alginate and fibrin gel on the micropillar chip, cultured in 3D, and exposed to six model compounds in the microwell chip for rapidly assessing mechanistic hepatotoxicity. Several toxicity parameters, including DNA damage, mitochondrial impairment, intracellular glutathione level, and cell membrane integrity were measured on the chip, and the IC50 values of the compounds at different readouts were determined to investigate the mechanism of toxicity. Overall, the Z' factors were between 0.6 and 0.8 for the HCI assays, and the coefficient of variation (CV) were below 20%. These results indicate high robustness and reproducibility of the HCI assays established on the miniaturized 3D cell culture chip. In addition, it was possible to determine the predominant mechanism of toxicity using the 3D HCI assays. Therefore, our miniaturized 3D cell culture coupled with HCI assays has great potential for high-throughput screening (HTS) of compounds and mechanistic toxicity profiling.

Deconvolution of images from 3D printed cells in layers on a chip.

Layer-by-layer cell printing is useful in mimicking layered tissue structures inside the human body and has great potential for being a promising tool in the field of tissue engineering, regenerative medicine, and drug discovery. However, imaging human cells cultured in multiple hydrogel layers in 3D-printed tissue constructs is challenging as the cells are not in a single focal plane. Although confocal microscopy could be a potential solution for this issue, it compromises the throughput which is a key factor in rapidly screening drug efficacy and toxicity in pharmaceutical industries. With epifluorescence microscopy, the throughput can be maintained at a cost of blurred cell images from printed tissue constructs. To rapidly acquire in-focus cell images from bioprinted tissues using an epifluorescence microscope, we created two layers of Hep3B human hepatoma cells by printing green and red fluorescently labeled Hep3B cells encapsulated in two alginate layers in a microwell chip. In-focus fluorescent cell images were obtained in high throughput using an automated epifluorescence microscopy coupled with image analysis algorithms, including three deconvolution methods in combination with three kernel estimation methods, generating a total of nine deconvolution paths. As a result, a combination of Inter-Level Intra-Level Deconvolution (ILILD) algorithm and Richardson-Lucy (RL) kernel estimation proved to be highly useful in bringing out-of-focus cell images into focus, thus rapidly yielding more sensitive and accurate fluorescence reading from the cells in different layers. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 34:445-454, 2018.

Antimicrobial effects of silver nanoparticles.

The antimicrobial effects of silver (Ag) ion or salts are well known, but the effects of Ag nanoparticles on microorganisms and antimicrobial mechanism have not been revealed clearly. Stable Ag nanoparticles were prepared and their shape and size distribution characterized by particle characterizer and transmission electron microscopic study. The antimicrobial activity of Ag nanoparticles was investigated against yeast, Escherichia coli, and Staphylococcus aureus. In these tests, Muller Hinton agar plates were used and Ag nanoparticles of various concentrations were supplemented in liquid systems. As results, yeast and E. coli were inhibited at the low concentration of Ag nanoparticles, whereas the growth-inhibitory effects on S. aureus were mild. The free-radical generation effect of Ag nanoparticles on microbial growth inhibition was investigated by electron spin resonance spectroscopy. These results suggest that Ag nanoparticles can be used as effective growth inhibitors in various microorganisms, making them applicable to diverse medical devices and antimicrobial control systems.

Effects of 7-hydroxy-3-methoxycadalene on cell cycle, apoptosis and protein translation in A549 lung cancer cells.

Previously we reported that cadalene extracted from Zelkova serrata inhibited lung tumorigenesis in mice. However, the precise mechanism has not yet investigated. Here, we examined the effects of cadalene on signal pathways important for apoptosis, cell cycle, and protein translation in lung cancer cells. Our results showed that cadalene suppressed the expression of Akt and its phosphor-forms through controlling PI3K and PTEN. Cadalene also induced apoptosis through facilitating pro-apoptotic protein expression. In addition, cadalene caused cell cycle arrest and decreased mTOR-mediated protein translation. Taken together, cadalene may be developed as a lung cancer therapeutic agent in the future.

Suppression of Tobacco Carcinogen-Induced Lung Tumorigenesis by Aerosol-Delivered Glycerol Propoxylate Triacrylate-Spermine Copolymer/Short Hairpin Rab25 RNA Complexes in Female A/J Mice.

BACKGROUND: Rab25, a member of Rab family of small guanosine triphosphatase, is associated with progression of various types of human cancers, including lung cancer, the leading cause of cancer-associated deaths around the globe. METHODS: In this study, we report the gene therapeutic effect of short hairpin Rab25 RNA (shRab25) on 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK)-induced lung tumorigenesis in female A/J mice. Initially, mice (6 weeks old) were injected with single dose of NNK (2 mg/0.1 mL saline/mouse) by intraperitoneal injection to induce the tumor. Eight weeks later, shRab25 was complexed with glycerol propoxylate triacrylate-spermine (GPT-SPE) copolymer and delivered into tobacco-induced lung cancer models through a nose-only inhalation system twice a week for 2 months. RESULTS: GPT-SPE/shRab25 largely decreased the tobacco-induced tumor numbers and tumor volume in the lungs compared to GPT-SPE- or GPT-SPE/shScr-delivered groups. Remarkably, aerosol-delivered GPT-SPE/shRab25 significantly decreased the expression level of Rab25 and other prominent apoptosis-related proteins in female A/J mice. The apoptosis in these mice was determined by detecting the expression level of Bcl-2, proliferating cell nuclear antigen, Bax, and further confirmed by TUNEL assay. CONCLUSIONS: Our results strongly confirm the tumorigenic role of Rab25 in tobacco carcinogen-induced lung cancer and hence demonstrate aerosol delivery of shRab25 as a therapeutic target for lung cancer treatment.

Toxicity and tissue distribution of magnetic nanoparticles in mice.

The development of technology enables the reduction of material size in science. The use of particle reduction in size from micro to nanoscale not only provides benefits to diverse scientific fields but also poses potential risks to humans and the environment. For the successful application of nanomaterials in bioscience, it is essential to understand the biological fate and potential toxicity of nanoparticles. The aim of this study was to evaluate the biological distribution as well as the potential toxicity of magnetic nanoparticles to enable their diverse applications in life science, such as drug development, protein detection, and gene delivery. We recently synthesized biocompatible silica-overcoated magnetic nanoparticles containing rhodamine B isothiocyanate (RITC) within a silica shell of controllable thickness [MNPs@SiO2(RITC)]. In this study, the MNPs@SiO2(RITC) with 50-nm thickness were used as a model nanomaterial. After intraperitoneal administration of MNPs@SiO2(RITC) for 4 weeks into mice, the nanoparticles were detected in the brain, indicating that such nanosized materials can penetrate blood-brain barrier (BBB) without disturbing its function or producing apparent toxicity. After a 4-week observation, MNPs@SiO2(RITC) was still present in various organs without causing apparent toxicity. Taken together, our results demonstrated that magnetic nanoparticles of 50-nm size did not cause apparent toxicity under the experimental conditions of this study.

Cellular uptake of magnetic nanoparticle is mediated through energy-dependent endocytosis in A549 cells.

Biocompatible silica-overcoated magnetic nanoparticles containing an organic fluorescence dye, rhodamine B isothiocyanate (RITC), within a silica shell [50 nm size, MNP@SiO2(RITC)s] were synthesized. For future application of the MNP@SiO2(RITC)s into diverse areas of research such as drug or gene delivery, bioimaging, and biosensors, detailed information of the cellular uptake process of the nanoparticles is essential. Thus, this study was performed to elucidate the precise mechanism by which the lung cancer cells uptake the magnetic nanoparticles. Lung cells were chosen for this study because inhalation is the most likely route of exposure and lung cancer cells were also found to uptake magnetic nanoparticles rapidly in preliminary experiments. The lung cells were pretreated with different metabolic inhibitors. Our results revealed that low temperature disturbed the uptake of magnetic nanoparticles into the cells. Metabolic inhibitors also prevented the delivery of the materials into cells. Use of TEM clearly demonstrated that uptake of the nanoparticles was mediated through endosomes. Taken together, our results demonstrate that magnetic nanoparticles can be internalized into the cells through an energy-dependent endosomal-lysosomal mechanism.

Methodological considerations of electron spin resonance spin trapping techniques for measuring reactive oxygen species generated from metal oxide nanomaterials.

Qualitative and quantitative analyses of reactive oxygen species (ROS) generated on the surfaces of nanomaterials are important for understanding their toxicity and toxic mechanisms, which are in turn beneficial for manufacturing more biocompatible nanomaterials in many industrial fields. Electron spin resonance (ESR) is a useful tool for detecting ROS formation. However, using this technique without first considering the physicochemical properties of nanomaterials and proper conditions of the spin trapping agent (such as incubation time) may lead to misinterpretation of the resulting data. In this report, we suggest methodological considerations for ESR as pertains to magnetism, sample preparation and proper incubation time with spin trapping agents. Based on our results, each spin trapping agent should be given the proper incubation time. For nanomaterials having magnetic properties, it is useful to remove these nanomaterials via centrifugation after reacting with spin trapping agents. Sonication for the purpose of sample dispersion and sample light exposure should be controlled during ESR in order to enhance the obtained ROS signal. This report will allow researchers to better design ESR spin trapping applications involving nanomaterials.