Reprogramming mitochondrial metabolism of macrophages by miRNA-released microporous coatings to prevent peri-implantitis.

Although various new biomaterials have enriched the methods for peri-implant inflammation treatment, their efficacy is still debated, and secondary operations on the implant area have also caused pain for patients. Recently, strategies that regulate macrophage polarization to prevent or even treat peri-implantitis have attracted increasing attention. Here, we prepared a laser-drilled and covered with metal organic framework-miR-27a agomir nanomembrane (L-MOF-agomir) implant, which could load and sustain the release of miR-27a agomir. In vitro, the L-MOF-agomir titanium plate promoted the repolarization of LPS-stimulated macrophages from M1 to M2, and the macrophage culture supernatant promoted BMSCs osteogenesis. In a ligation-induced rat peri-implantitis model, the L-MOF-agomir implants featured strong immunomodulatory activity of macrophage polarization and alleviated ligation-induced bone resorption. The mechanism of repolarization function may be that the L-MOF-agomir implants promote the macrophage mitochondrial function and metabolism reprogramming from glycolysis to oxidative phosphorylation. Our study demonstrates the feasibility of targeting cell metabolism to regulate macrophage immunity for peri-implantitis inhibition and provides a new perspective for the development of novel multifunctional implants.

Application of Immediate Implant Placement Techniques in Peri-implantitis Modeling.

OBJECTIVES: To explore the use of immediate implant placement technique in peri-implantitis modeling, shorten the modeling period, and obtain similar effects. MATERIALS AND METHODS: Eighty rats were divided into 4 groups: immediate placement (IP), delayed placement (DP), IP-ligation (IP-L) and DP-ligation (DP-L). In the DP and DP-L groups, implants were placed 4 weeks after tooth extraction. In the IP and IP-L groups, implants were placed immediately. Four weeks later, the implants were ligated to induce peri-implantitis in the DP-L and IP-L groups. RESULTS: Nine implants were lost (3 in the IP-L and 2 each in the IP, DP, and DP-L group). The bone level decreased after ligation, and the buccal and lingual bone levels were lower in IP-L versus DP-L. The implant pullout strength was decreased after ligation. Micro-CT showed bone parameters were decreased after ligation, and the percent bone volume was higher in IP versus DP. Histology showed that the percent of CD4 + cells and IL-17 + cells was increased after ligation and higher in IP-L versus DP-L. CONCLUSIONS: We successfully introduced immediate implant placement into the modeling of peri-implantitis and observed similar bone resorption and more soft tissue inflammation in a shorter time.

MicroRNA sequence and function analysis in peri-implantitis and periodontitis: An animal study.

OBJECTIVE: To compare miRNA expression levels and predict relevant target genes and signaling pathways in peri-implantitis and periodontitis. BACKGROUND: There are many differences between periodontitis and peri-implantitis. An understanding of the similarities and differences in the transcriptional patterns of these diseases, as well as the molecular mechanisms, is beneficial for the development of management strategies. MATERIALS AND METHODS: Rat models of periodontitis (PD, n = 6) and peri-implantitis (PI, n = 5) were established by ligation. Implantation without ligation (PIC, n = 5) and normal rats (PDC, n = 6) were used as controls. Micro-CT was used to confirm the successful establishment of the model. Gingiva was harvested for miRNA transcriptome sequencing, and the results were confirmed by qRT-PCR. miRNA target genes were predicted with miRTarBase. Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) analyses were performed. RESULTS: Sixty-nine miRNAs were differentially expressed in PI vs. PD, 105 were differentially expressed in PI vs. PIC, and 70 were differentially expressed in PD vs. PDC (log2 FC ≥1 and padj <0.05). The upregulated genes in all three comparisons were mostly involved in the biological process response to stimulus, whereas most of the downregulated genes were involved in nervous system development (p < .01). The upregulated genes in PI vs. PD and PI vs. PIC were involved in Toll-like receptor signaling and RIG-I-like signaling. The upregulated genes in PI vs. PD were involved in T- and B-cell receptor signaling, apoptosis, and osteoclast differentiation. Focal adhesion was downregulated in all three comparisons, and adherens junction was downregulated in PI vs. PD and PD vs. PDC (p < .1). CONCLUSION: This study showed differences in the miRNA expression profiles between peri-implantitis and periodontitis and annotated the possible target genes and molecular mechanisms; this study could lay a foundation for the development of management strategies.

[Types and colors of 1 374 chair-side CAD/CAM all-ceramic restorations].

PURPOSE: To analyse the types of chairside CAD/CAM all-ceramic restorations and the color range of all-ceramic materials used so as to provide reference for the application of clinical chairside all-ceramic restoration and the color selection of all-ceramic materials. METHODS: IPS e.max CAD prostheses and related data were collected from January 2021 to December 2021 from the Department of Prosthodontics, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine. The number and type of restorations and the color of materials were investigated and analyzed by descriptive statistics. RESULTS: A total of 1 374 restorations were included, of which 624 were crown restorations, accounting for 45.41% of the total restorations. 516 cases were veneer, accounting for 37.55%; 219 were inlays, accounting for 15.94%; fixed bridges were all adhesive bridges, with the least number with only 15 cases, accounting for 1.09%. In terms of the selection of restoration materials, the use rate of low-transparent(LT) ceramic blocks was significantly higher than that of other transparent ceramic blocks. A was the most frequently used ceramic color. The most frequently used porcelain blocks for veneers were LTA2 and LTA1; for inlay were LTA3; for crowns were LTA2 and LTA3. The blocks used in the fixed bridges were all LT, and A3 color was the majority. CONCLUSIONS: Chairside CAD/CAM all-ceramic prostheses made of IPS e.max CAD materials have been widely used in clinical practice. The types of prostheses include veneer, inset, crown and fixed bridge. The most commonly used IPS e.max CAD blocks are LTA2, LTA3 and LTA1. These findings have certain guiding significance for the clinical restoration decision and the reserve of porcelain blocks in primary hospitals.

Adsorption properties of cellulose-derived hydrogel and magnetic hydrogels from Sophora flavescens on Cu2+ and Congo red.

This study synthesized a robust, magnetically responsive hydrogel from Sophora flavescens-modified cellulose and chitosan, employing Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA and DTG), and scanning electron microscopy (SEM) to confirm the preservation of cellulose's intrinsic properties and the hydrogel's remarkable elasticity, toughness, and porosity. These hydrogels integrate cellulose's structural backbone with functional moieties from chitosan, enhancing adsorption capabilities for Cu2+ ions and Congo red (CR) dye. Kinetic and thermodynamic analyses reveal that adsorption is spontaneous and endothermic, following a pseudo-second-order model and the Freundlich isotherm. Notably, Cu2+ adsorption capacity increases with pH, while CR adsorption initially decreases before rising, demonstrating the hydrogels' potential as effective, sustainable adsorbents for removing pollutants from water.

Analysis of Th-cell subsets in local and systemic environments from experimental periodontitis rats.

OBJECTIVES: The objective of this study was to explore the effect of periodontitis on Th-cell subsets in local and systemic environments. METHODS: A total of 32 male Sprague-Dawley rats were randomly divided into periodontitis and control groups. Silk ligatures were applied to the mandibular first (M1) molars in the periodontitis group. Inflammation and alveolar bone loss around the M1 molars were analyzed by histological staining and microcomputed tomography. The mRNA expression of interferon-γ (IFN-γ), interleukin 4 (IL-4), IL-17, and IL-10 in the gingiva was measured by qRT-PCR. The proportions of Th1, Th2, Th17, and Treg cells in the submandibular lymph nodes, peripheral blood, and jaw bone marrow were tested using flow cytometry. RESULTS: More inflammatory cells and alveolar bone resorption were found in the periodontitis group, with upregulated mRNA expression of IFN-γ, IL-17, and IL-10. The proportion of Th1 and Th17 cells was significantly elevated in submandibular lymph nodes, and the proportion of Th1, Th2, and Th17 cells was significantly elevated in peripheral blood, while the proportion of Th1, Th17, and Treg cells was significantly elevated in jaw bone marrow in the periodontitis group. CONCLUSION: This study suggests that periodontitis affects the differentiation of Th-cell subsets in both local and systemic environments, resulting in an increased proportion of proinflammatory cells.

[Assessment of the reproducibility of occlusal morphology for digital full crown designed by mandibular trajectory data].

PURPOSE: To metrically assess the reproducibility of mandibular trajectory data and mean frame parameter in guiding the design of occlusal morphology of prosthesis. METHODS: Fifteen subjects with complete dentition were selected, including 6 females and 9 males, with an average age of 22-30 years old. The mandibular trajectory data and mean frame parameter were used to guide the design of occlusal morphology of the prosthesis in the CAD system, then the occlusal morphology was compared to the original natural teeth. The data were statistically analyzed by SPSS 25.0 software package. RESULTS: The general deviation of occlusal morphology between the prosthesis guided by mandibular trajectory data and mean frame parameter with the natural teeth was as follows: mean positive distance was (269.9±63.1) µm, (318.7±51.3) µm; mean negative distance was (-175.8±78.2) µm, (-253.7±65.6) µm; root mean square (RMS) was (267.1±84.9) µm and (304.1±82.2) µm. The vertical distance on mesial buccal cusp was (197.6±86.2) µm and (288.0±79.6) µm，distal buccal cusp was (176.3±85.3) µm and (297.7±63.2) µm, mesial lingual cusp was (171.6±62.4) µm and (246.4±62.8) µm, distal lingual cusp was (166.2±64.6) µm and (232.5±70.7) µm, central fossa was (104.9±42.2) µm and (219.1±69.1) µm. RMS, mean(-) and vertical differences of central fossa and distal buccal cusp were significantly different(P＜0.05). CONCLUSIONS: The occlusal morphology of the prosthesis designed under the guidance of mandibular trajectory data and mean frame parameter both have significant differences with natural occlusion, but the deviation guided by mandibular trajectory data is lower.