RESUMO
Active control of the surface-enhanced Raman scattering (SERS) enhancement shows great potential for realizing smart detection of different molecules. However, conventional methods usually involve time-consuming structural design or a sophisticated fabrication process. Herein, we reported an electrically tunable field effect transistor (FET) comprising a WOx/MoOx hybrid as the SERS active layer. In the experiment, WOx/MoOx hybrids were first prepared by mixing different molar ratios of WOx and MoOx oxides. Then, R6G molecules were used as Raman reporters, showing that the intensity of the SERS signal observed on the most optimal hybrids (molar ratio = 1 : 3) could be increased by two times as high as that observed on a single WOx or MoOx based substrate, which was ascribed to enhanced charge transfer efficiency by the constructed nano-heterojunction between the WOx and MoOx oxides. Thereafter, a back-gate FET was fabricated on a SiO2/Si substrate, and the most optimal WOx/MoOx hybrid was deposited as the gate channel and the SERS active layer. After that, a series of gate biases (from -15 V to 15 V) were implemented to actively tune the SERS performance of the FET. It is evident that the SERS EF can be further tuned from 2.39 × 107 (-15 V) to 6.55 × 107 (+10 V), which is â¼7.4/4.1 times higher than that observed on the pure WOx device (8.81 × 106) or pure MoOx (1.61 × 107) device, respectively. Finally, the mechanism behind the electrical tuning strategy was investigated. It is revealed that a positive voltage would bend the conduction band down, which increased the electron density near the Fermi level. Consequently, it triggered the resonance charge transfer and significantly improved the SERS performance. In contrast, a negative gate voltage attracted the holes to the Fermi level, which deferred the charge transfer process, and caused the reduction of the SERS enhancement.
RESUMO
Stochastic and robust optimization approaches often result in sub-optimal solutions for the uncertain p-hub median problem when continuous design parameters are discretized to form different environmental scenarios. To solve this problem, this paper proposes a triangular fuzzy number model for the Non-Strict Uncapacitated Multi-Allocation p-hub Median Problem. To enhance the quality and the speed of optimization, a novel optimization approach, combining the triangular fuzzy number evaluation index with the Genetic-Tabu Search algorithm, is proposed. During the iterations of the Genetic-Tabu Search algorithm for finding the optimal solution, the fitness of fuzzy hub schemes is calculated by considering the relative positional relationships of triangular fuzzy number membership functions. This approach directly addresses the triangular fuzzy number model and ensures the integrity of information in the p-hub problem as much as possible. It is verified by the classic Civil Aeronautics Board and several self-constructed data sets. The results indicate that, compared to the traditional Genetic Algorithm and Tabu Search algorithm, the Genetic-Tabu Search algorithm reduces average computation time by 49.05% and 40.93%, respectively. Compared to traditional random, robust, and real-number-based optimization approaches, the proposed optimization approach reduces the total cost in uncertain environments by 1.47%, 2.80%, and 8.85%, respectively.
Assuntos
Algoritmos , Lógica Fuzzy , IncertezaRESUMO
Surface-enhanced Raman scattering (SERS) is a non-destructive spectra analysis technique. It has the virtues of high detectivity and sensitivity, and has been extensively studied for low-trace molecule detection. Presently, a non-noble-metal-based SERS substrate with excellent enhancement capabilities and environmental stability is available for performing advanced biomolecule detection. Herein, a type of molybdenum carbide/molybdenum oxide (Mo2C@MoOx) heterostructure is constructed, and attractive SERS performance is achieved through the promotion of the charge transfer. Experimentally, Mo2C was first prepared by calcinating the ammonium molybdate tetrahydrate and gelatin mixture in an argon atmosphere. Then, the obtained Mo2C was further annealed in the air to obtain the Mo2C@MoOx heterostructure. The SERS performance was evaluated by using a 532 nm laser as an excitation source and a rhodamine 6G (R6G) molecule as the Raman reporter. This process demonstrates that attractive SERS performance with a Raman enhancement factor (EF) of 1.445 × 108 (R6G@10-8 M) and a limit of detection of 10-8 M can be achieved. Furthermore, the mechanism of SERS performance improvement with the Mo2C@MoOx is also investigated. HRTEM detection and XPS spectra reveal that part of the Mo2C is oxidized into MoOx during the air-annealing process, and generates metal-semiconductor mixing energy bands in the heterojunction. Under the Raman laser irradiation, considerable hole-electron pairs are generated in the heterojunction, and then the hot electrons move towards MoOx and subsequently transfer to the molecules, which ultimately boosts the Raman signal intensity.