Electrochemical Modulation of the Flammability of Ionic Liquid Fuels.

Flammability and combustion of high energy density liquid propellants are controlled by their volatility. We demonstrate a new concept through which the volatility of a high energy density ionic liquid propellant can be dynamically manipulated enabling one to (a) store a thermally insensitive oxidation resistant nonflammable fuel, (b) generate flammable vapor phase species electrochemically by applying a direct-current voltage bias, and (c) extinguish its flame by removing the voltage bias, which stops its volatilization. We show that a thermally stable imidazolium-based energy dense ionic liquid can be made flammable or nonflammable simply by application or withdrawal of a direct-current bias. This cycle can be repeated as often as desired. The estimated energy penalty of the electrochemical activation process is only ∼4% of the total energy release. This approach presents a paradigm shift, offering the potential to make a "safe fuel" or alternatively a simple electrochemically driven fuel metering scheme.

Magnesium-Induced Strain and Immobilized Radical Generation on the Boron Oxide Surface Enhances the Oxidation Rate of Boron Particles: A DFTB-MD Study.

Despite their high gravimetric and volumetric energy densities, boron (B) particles suffer from poor oxidative energy release rates as the boron oxide (B2O3) shell impedes the diffusivity of O2 to the particle interior. Recent experiemental studies have shown that the addition of metals with a lower free energy of oxidation, such as Mg, can reduce the oxide shell of B and enhance the energetic performance of B by ∼30-60%. However, the exact underlying mechanism behind the reactivity enhancement is unknown. Here, we performed DFTB-MD simulations to study the reaction of Mg vapor with a B2O3 surface. We found that the Mg becomes oxidized on the B2O3 surface, forming a MgBxOy phase, which induces a tensile strain in the B-O bond at the MgBxOy-B2O3 interface, simultaneously reducing the interfacial B and thereby developing dangling bonds. The interfacial bond straining creates an overall surface expansion, indicating the presence of a net tensile strain. The B with dangling bonds can act as active centers for gas-phase O2 adsorption, thereby increasing the adsorption rate, and the overall tensile strain on the surface will increase the diffusion flux of adsorbed O through the surface to the particle core. As the overall B particle oxidation rate is dependent on both the O adsorption and diffusion rates, the enhancement in both of these rates increases the overall reactivity of B particles.

Revealing High-Temperature Reduction Dynamics of High-Entropy Alloy Nanoparticles via In Situ Transmission Electron Microscopy.

Understanding the behavior of high-entropy alloy (HEA) materials under hydrogen (H2) environment is of utmost importance for their promising applications in structural materials, catalysis, and energy-related reactions. Herein, the reduction behavior of oxidized FeCoNiCuPt HEA nanoparticles (NPs) in atmospheric pressure H2 environment was investigated by in situ gas-cell transmission electron microscopy (TEM). The reduction reaction front was maintained at the external surface of the oxide. During reduction, the oxide layer expanded and transformed into porous structures where oxidized Cu was fully reduced to Cu NPs while Fe, Co, and Ni remained in the oxidized form. In situ chemical analysis showed that the expansion of the oxide layer resulted from the outward diffusion flux of all transition metals (Fe, Co, Ni, Cu). Revealing the H2 reduction behavior of HEA NPs facilitates the development of advanced multicomponent alloys for applications targeting H2 formation and storage, catalytic hydrogenation, and corrosion removal.

Elucidating the dominant mechanisms in burn rate increase of thermite nanolaminates incorporating nanoparticle inclusions.

It was experimentally found that silica and gold particles can modify the combustion properties of nanothermites but the exact role of the thermal properties of these additives on the propagating combustion front relative to other potential contributions remains unknown. Gold and silica particles of different sizes and volume loadings were added into aluminum/copper oxide thermites. Their effects on the flame front dynamics were investigated experimentally using microscopic dynamic imaging techniques and theoretically via a reaction model coupling mass and heat diffusion processes. A detailed theoretical analysis of the local temperature and thermal gradients at the vicinity of these two additives shows that highly conductive inclusions do not accelerate the combustion front while poor conductive inclusions result in the distortion of the flame front (corrugation), and therefore produce high thermal gradients (up to 1010K.m-1) at the inclusion/host material interface. This results in an overall slowing down of the combustion front. These theoretical findings contradict the experimental observations in which a net increase of the flame front velocity was found when Au and SiO2particles are added into the thermite. This leads to the conclusion that the faster burn rate observed experimentally cannot be fully associated with thermal effects only, but rather on chemical (catalytic) and/or mechanical mechanisms: formation of highly-stressed zones around the inclusion promoting the reactant mixing. One additional experiment in which physical SiO2particles were replaced by voids (filled with Ar during experiment) to cancel the potential mechanical effects while preserving the thermal inhomogeneity in the thermite structure confirms the hypothesis that instead of pure thermal conduction, it is the mechanical mechanisms that dominate the propagation velocity in our specific Al/CuO multilayered films.

High-Temperature Pulse Method for Nanoparticle Redispersion.

Nanoparticles suffer from aggregation and poisoning issues (e.g., oxidation) that severely hinder their long-term applications. However, current redispersion approaches, such as continuous heating in oxidizing and reducing environments, face challenges including grain growth effects induced by long heating times as well as complex procedures. Herein, we report a facile and efficient redispersion process that enables us to directly transform large aggregated particles into nanoscale materials. In this method, a piece of carbon nanofiber film was used as a heater and high treatment temperature (∼1500-2000 K) is rapidly elevated and maintained for a very short period of time (100 ms), followed by fast quenching back to room temperature at a cooling rate of 105 K/s to inhibit sintering. With these conditions we demonstrate the redispersion of large aggregated metal oxide particles into metallic nanoparticles just ∼10 nm in size, uniformly distributed on the substrate. Furthermore, the metallic states of the nanoparticles are renewed during the heat treatment through reduction. The redispersion process removes impurities and poisoning elements, yet is able to maintain the integrity of the substrate because of the ultrashort heating pulse time. This method is also significantly faster (ca. milliseconds) compared to conventional redispersion treatments (ca. hours), providing a pragmatic strategy to redisperse degraded particles for a variety of applications.

Aerosol Synthesis of High Entropy Alloy Nanoparticles.

Homogeneously mixing multiple metal elements within a single particle may offer new material property functionalities. High entropy alloys (HEAs), nominally defined as structures containing five or more well-mixed metal elements, are being explored at the nanoscale, but the scale-up to enable their industrial application is an extremely challenging problem. Here, we report an aerosol droplet-mediated technique toward scalable synthesis of HEA nanoparticles with atomic-level mixing of immiscible metal elements. An aqueous solution of metal salts is nebulized to generate ∼1 µm aerosol droplets, which when subjected to fast heating/quenching result in decomposition of the precursors and freezing-in of the zero-valent metal atoms. Atomic-level resolution scanning transmission electron microscopy coupled with energy-dispersive X-ray spectroscopy analysis reveals that all metal elements in the nanoparticles are homogeneously mixed at the atomic level. We believe that this approach offers a facile and flexible aerosol droplet-mediated synthesis technique that will ultimately enable bulk processing starting from a particulate HEA.

Vapor-Phase Strategy to Pillaring of Two-Dimensional Zeolite.

Two-dimensional (2D) layered zeolites are new forms of 3D zeolite frameworks. They can be pillared to form more open porous structures with increased access for reactants that are too big for the micropores of zeolites. The current pillaring procedure, however, requires intercalation of pillaring precursors by dispersing 2D zeolite in an alkoxide liquid and hydrolizing entrapped alkoxide to form inorganic oxide pillars in an aqueous alkaline solution. Both steps use excess solvents, generate significant waste, and require multiple synthesis and separation steps. Here we report a vapor-phase pillarization (VPP) process to produce pillared zeolites from 2D layered zeolite structures. The VPP process has ∼100% efficiency of alkoxide usage in the intercalation step, requires less (and, in some cases, zero) water addition in the hydrolysis step, does not require separation for product recovery, and generates no liquid waste. Furthermore, synthesis of pillared zeolites via the VPP process can be accomplished within a single apparatus with one-time operation. The pillared zeolite prepared by the VPP method preserved the zeolitic layered structure as well as acidity and showed enhancement in catalytic alkylation of mesitylene with benzyl alcohol compared to 2D layered zeolite without pillarization treatment.

Thermal Shock Synthesis of Metal Nanoclusters within On-the-Fly Graphene Particles.

Metal nanoclusters (1-10 nm) have drawn great attention because of their potential applications including energy storage, catalysis, nanomedicine, and electronic devices. However, manufacturing ultrasmall metal nanoparticles at high concentrations in an unaggregated state is not a solved problem. Here, we report an aerosol-based thermal shock technique for in situ synthesis of well-dispersed metal nanoclusters in on-the-fly graphene aerosols. A rapid thermal shock to the graphene aerosol has been used to nucleate and grow the metal nanoclusters with subsequent quenching to freeze the newly formed nanoclusters in the graphene aerosol matrix. A characteristic time analysis comparison with the experiment shows that the nanocluster formation is governed by nucleation and subsequent surface growth and that the graphene retards coagulation, enabling unaggregated metal nanoclusters. The method is generic, and we show the formation of sub-10 nm Ni, Co, and Sn nanoclusters. This continuous aerosol-based thermal shock technique offers considerable potential for the scalable synthesis of well-dispersed and uniform metal nanoclusters stabilized within a host matrix. As an example of potential application, we demonstrate very favorable catalytic properties.

Fast quantification of nanorod geometry by DMA-spICP-MS.

A fast, quantitative method for determining the dimensions of nanorods (i.e., length and diameter) is described, based on hyphenation of differential mobility analysis (DMA) with single particle inductively coupled plasma mass spectrometry (spICP-MS). Seven gold nanorod samples with different dimensions (diameters 11.8 nm to 38.2 nm, aspect ratios 1.8 to 6.9) were used to validate the method. We demonstrate that DMA-spICP-MS can (1) achieve quantification of both length and diameter comparable with TEM analysis, (2) make statistically meaningful measurements in minutes at low concentrations (<108 mL-1) and (3) separate nanorods from spheres and quantify the geometry of each population. A robustness analysis of this method was performed to evaluate potential biases in this approach.

Growth of Sub-5 nm Metal Nanoclusters in Polymer Melt Aerosol Droplets.

Ultrasmall metal nanoparticles are inherently unstable because of their high specific surface area. This work investigates how growth and aggregation of these nanostructures can be circumvented by incorporating them into a polymer matrix in an on-the-fly growth process. We demonstrate the formation of sub-5 nm particles of Ni, Co, and Cu nanoparticles in a polymer matrix using an aerosol single-drop reactor approach. The rapid thermal pulse given to the aerosol particles enables the formation of nuclei and growth, with subsequent rapid quenching to freeze in the structure. The role of the temperature as well as the precursor concentration of the resulting size and morphology is discussed. A characteristic time analysis and an analysis of the particle size distributions lead to the conclusion that growth is governed by nucleation and surface growth, with little coagulation or Ostwald ripening. Finally, we note that this aerosol route is amenable to scale-up for large-scale production of nanoclusters that can either be used as is within the polymer or released by solvent extraction, depending on the application.

Surface Modification of Cisplatin-Complexed Gold Nanoparticles and Its Influence on Colloidal Stability, Drug Loading, and Drug Release.

Cisplatin-complexed gold nanoparticles (PtII-AuNP) provide a promising strategy for chemo-radiation-based anticancer drugs. Effective design of such platforms necessitates reliable assessment of surface engineering on a quantitative basis and its influence on drug payload, stability, and release. In this paper, poly(ethylene glycol) (PEG)-stabilized PtII-AuNP was synthesized as a model antitumor drug platform, where PtII is attached via a carboxyl-terminated dendron ligand. Surface modification by PEG and its influence on drug loading, colloidal stability, and drug release were assessed. Complexation with PtII significantly degrades colloidal stability of the conjugate; however, PEGylation provides substantial improvement of stability in conjunction with an insignificant trade-off in drug loading capacity compared with the non-PEGylated control (<20% decrease in loading capacity). In this context, the effect of varying PEG concentration and molar mass was investigated. On a quantitative basis, the extent of PEGylation was characterized and its influence on dispersion stability and drug load was examined using electrospray differential mobility analysis (ES-DMA) hyphenated with inductively coupled plasma mass spectrometry (ICP-MS) and compared with attenuated total reflectance-FTIR. Using ES-DMA-ICP-MS, AuNP conjugates were size-classified based on their electrical mobility, while PtII loading was simultaneously quantified by determination of Pt mass. Colloidal stability was quantitatively evaluated in biologically relevant media. Finally, the pH-dependent PtII release performance was evaluated. We observed 9% and 16% PtII release at drug loadings of 0.5 and 1.9 PtII/nm2, respectively. The relative molar mass of PEG had no significant influence on PtII uptake or release performance, while PEGylation substantially improved the colloidal stability of the conjugate. Notably, the PtII release over 10 days (examined at 0.5 PtII/nm2 drug loading) remained constant for non-PEGylated, 1K-PEGylated, and 5K-PEGylated conjugates.

Mechanistic Studies of [AlCp*]4 Combustion.

The combustion mechanism of [AlCp*]4 (Cp* = pentamethylcyclopentadienyl), a ligated aluminum(I) cluster, was studied by a combination of experimental and theoretical methods. Two complementary experimental methods, temperature-programmed reaction and T-jump time-of-flight mass spectrometry, were used to investigate the decomposition behaviors of [AlCp*]4 in both anaerobic and oxidative environments, revealing AlCp* and Al2OCp* to be the major decomposition products. The observed product distribution and reaction pathways are consistent with the prediction from molecular dynamics simulations and static density functional theory calculations. These studies demonstrated that experiment and theory can indeed serve as complementary and predictive means to study the combustion behaviors of ligated aluminum clusters and may help in engineering stable compounds as candidates for rocket propellants.

What atomic properties of metal oxide control the reaction threshold of solid elemental fuels?

The redox reaction between fuel (metal, metalloid, etc.) and metal oxide is ubiquitous. On the other hand simple thermodynamic considerations do not seem to yield much insight into what makes for a vigorous oxidizer. In this study, two different systematically doped metal oxide systems: perovskites (9 compounds) and δ-Bi2O3 (12 compounds) were synthesized in a manner such that for each system the crystal structure and morphology were maintained. Four fuels (Al, B, Ta, C) with different physical properties, covering almost all fuel types, were included in this study. The initiation temperature and oxygen release temperature was measured by fast heating (>105 K s-1) temperature-jump/time-of-flight mass spectrometry coupled with high-speed imaging. These results were then correlated with the average metal-oxygen bond energy in the oxidizer, and overall metal-oxygen electronegativity. In general, within each systematic metal oxide, we found linear relationships between average bond energy and electronegativity of the metal oxides with initiation temperature for all four fuels, despite their very different physical/chemical properties. These results indicate that intrinsic atomic properties of metal oxide control fuel-metal oxide reaction initiation.

Direct In Situ Mass Specific Absorption Spectra of Biomass Burning Particles Generated from Smoldering Hard and Softwoods.

Particles from smoldering biomass burning (BB) represent a major source of carbonaceous aerosol in the terrestrial atmosphere. In this study, mass specific absorption spectra of laboratory-generated smoldering wood particles (SWP) from 3 hardwood and 3 softwood species were measured in situ. Absorption data spanning from λ = 500 to 840 nm were collected using a photoacoustic spectrometer coupled to a supercontinuum laser with a tunable wavelength and bandwidth filter. SWP were size- (electrical mobility) and mass-selected prior to optical characterization allowing data to be reported as mass-specific absorption cross sections (MAC). The median measured MAC at λ = 660 nm for smoldering oak particles was 1.1 (0.57/1.8) × 10-2 m2 g-1 spanning from 83 femtograms (fg) to 517 fg (500 nm ≤ mobility diameter ≤950 nm), MAC values in parentheses are the 16th and 84th percentiles of the measured data (i.e., 1σ). The collection of all six wood species (Oak, Hickory, Mesquite, Western redcedar, Baldcypress, and Blue spruce) had median MAC values ranging from 1.4 × 10-2 m2 g-1 to 7.9 × 10-2 m2 g-1 at λ = 550 nm with absorption Ångström exponents (AAE) between 3.5 and 6.2. Oak, Western redcedar, and Blue spruce possessed statistically similar (p > 0.05) spectra while the spectra of Hickory, Mesquite, and Baldcypress were distinct (p < 0.01) as calculated from a point-by-point analysis using the Wilcox rank-sum test.

Doped δ-bismuth oxides to investigate oxygen ion transport as a metric for condensed phase thermite ignition.

Nanothermites offer high energy density and high burn rates, but are mechanistically only now being understood. One question of interest is how initiation occurs and how the ignition temperature is related to microscopic controlling parameters. In this study, we explored the potential role of oxygen ion transport in Bi2O3 as a controlling mechanism for condensed phase ignition reaction. Seven different doped δ-Bi2O3 were synthesized by aerosol spray pyrolysis. The ignition temperatures of Al/doped Bi2O3, C/doped Bi2O3 and Ta/doped Bi2O3 were measured by temperature-jump/time-of-flight mass spectrometer coupled with a high-speed camera respectively. These results were then correlated to the corresponding oxygen ion conductivity (directly proportional to ion diffusivity) for these doped Bi2O3 measured by impedance spectroscopy. We find that ignition of thermite with doped Bi2O3 as oxidizer occurs at a critical oxygen ion conductivity (∼0.06 S cm-1) of doped Bi2O3 in the condensed-phase so long as the aluminum is in a molten state. These results suggest that oxygen ion transport limits the condensed state Bi2O3 oxidized thermite ignition. We also find that the larger oxygen vacancy concentration and the smaller metal-oxide bond energy in doped Bi2O3, the lower the ignition temperature. The latter suggests that we can consider the possibility of manipulating microscopic properties within a crystal, to tune the resultant energetic properties.

Packing density of rigid aggregates is independent of scale.

Large planetary seedlings, comets, microscale pharmaceuticals, and nanoscale soot particles are made from rigid, aggregated subunits that are compacted under low compression into larger structures spanning over 10 orders of magnitude in dimensional space. Here, we demonstrate that the packing density (θf) of compacted rigid aggregates is independent of spatial scale for systems under weak compaction. The θf of rigid aggregated structures across six orders of magnitude were measured using nanoscale spherical soot aerosol composed of aggregates with ∼ 17-nm monomeric subunits and aggregates made from uniform monomeric 6-mm spherical subunits at the macroscale. We find θf = 0.36 ± 0.02 at both dimensions. These values are remarkably similar to θf observed for comet nuclei and measured values of other rigid aggregated systems across a wide variety of spatial and formative conditions. We present a packing model that incorporates the aggregate morphology and show that θf is independent of both monomer and aggregate size. These observations suggest that the θf of rigid aggregates subject to weak compaction forces is independent of spatial dimension across varied formative conditions.

Electrospray-Differential Mobility Hyphenated with Single Particle Inductively Coupled Plasma Mass Spectrometry for Characterization of Nanoparticles and Their Aggregates.

The novel hyphenation of electrospray-differential mobility analysis with single particle inductively coupled plasma mass spectrometry (ES-DMA-spICPMS) was demonstrated with the capacity for real-time size, mass, and concentration measurement of nanoparticles (NPs) on a particle-to-particle basis. In this proof-of-concept study, the feasibility of this technique was validated through both concentration and mass calibration using NIST gold NP reference materials. A detection limit of 10(5) NPs mL(-1) was determined under current experimental conditions, which is about 4 orders of magnitude lower in comparison to that of a traditional ES-DMA setup using a condensation particle counter as detector. Furthermore, independent and simultaneous quantification of both size and mass of NPs provides information regarding NP aggregation states. Two demonstrative applications include gold NP mixtures with a broad size range (30-100 nm), and aggregated gold NPs with a primary size of 40 nm. Finally, this technique was shown to be potentially useful for real-world samples with high ionic background due to its ability to remove dissolved ions yielding a cleaner background. Overall, we demonstrate the capacity of this new hyphenated technique for (1) clearly resolving NP populations from a mixture containing a broad size range; (2) accurately measuring a linear relationship, which should inherently exist between mobility size and one-third power of ICPMS mass for spherical NPs; (3) quantifying the early stage propagation of NP aggregation with well-characterized oligomers; and (4) differentiating aggregated NPs and nonaggregated states based on the "apparent density" derived from both DMA size and spICPMS mass.

Measured Wavelength-Dependent Absorption Enhancement of Internally Mixed Black Carbon with Absorbing and Nonabsorbing Materials.

Optical absorption spectra of laboratory generated aerosols consisting of black carbon (BC) internally mixed with nonabsorbing materials (ammonium sulfate, AS, and sodium chloride, NaCl) and BC with a weakly absorbing brown carbon surrogate derived from humic acid (HA) were measured across the visible to near-IR (550 to 840 nm). Spectra were measured in situ using a photoacoustic spectrometer and step-scanning a supercontinuum laser source with a tunable wavelength and bandwidth filter. BC had a mass-specific absorption cross section (MAC) of 7.89 ± 0.25 m(2) g(-1) at λ = 550 nm and an absorption Ångström exponent (AAE) of 1.03 ± 0.09 (2σ). For internally mixed BC, the ratio of BC mass to the total mass of the mixture was chosen as 0.13 to mimic particles observed in the terrestrial atmosphere. The manner in which BC mixed with each material was determined from transmission electron microscopy (TEM). AS/BC and HA/BC particles were fully internally mixed, and the BC was both internally and externally mixed for NaCl/BC particles. The AS/BC, NaCl/BC, and HA/BC particles had AAEs of 1.43 ± 0.05, 1.34 ± 0.06, and 1.91 ± 0.05, respectively. The observed absorption enhancement of mixed BC relative to the pure BC was wavelength dependent for AS/BC and decreased from 1.5 at λ = 550 nm with increasing wavelength while the NaCl/BC enhancement was essentially wavelength independent. For HA/BC, the enhancement ranged from 2 to 3 and was strongly wavelength dependent. Removal of the HA absorption contribution to enhancement revealed that the enhancement was ≈1.5 and independent of wavelength.

Nanocalorimetry-coupled time-of-flight mass spectrometry: identifying evolved species during high-rate thermal measurements.

We report on measurements integrating a nanocalorimeter sensor into a time-of-flight mass spectrometer (TOFMS) for simultaneous thermal and speciation measurements at high heating rates. The nanocalorimeter sensor was incorporated into the extraction region of the TOFMS system to provide sample heating and thermal information essentially simultaneously with the evolved species identification. This approach can be used to measure chemical reactions and evolved species for a variety of materials. Furthermore, since the calorimetry is conducted within the same proximal volume as ionization and ion extraction, evolved species detected are in a collision-free environment, and thus, the possibility exists to interrogate intermediate and radical species. We present measurements showing the decomposition of ammonium perchlorate, copper oxide nanoparticles, and sodium azotetrazolate. The rapid, controlled, and quantifiable heating rate capabilities of the nanocalorimeter coupled with the 0.1 ms temporal resolution of the TOFMS provides a new measurement capability and insight into high-rate reactions, such as those seen with reactive and energetic materials, and adsorption\desorption measurements, critical for understanding surface chemistry and accelerating catalyst selection.

Orthogonal analysis of functional gold nanoparticles for biomedical applications.

We report a comprehensive strategy based on implementation of orthogonal measurement techniques to provide critical and verifiable material characteristics for functionalized gold nanoparticles (AuNPs) used in biomedical applications. Samples were analyzed before and after ≈50 months of cold storage (≈4 °C). Biomedical applications require long-term storage at cold temperatures, which could have an impact on AuNP therapeutics. Thiolated polyethylene glycol (SH-PEG)-conjugated AuNPs with different terminal groups (methyl-, carboxylic-, and amine-) were chosen as a model system due to their high relevancy in biomedical applications. Electrospray-differential mobility analysis, asymmetric-flow field flow fractionation, transmission electron microscopy, scanning electron microscopy, atomic force microscopy, inductively coupled plasma mass spectrometry, and small-angle X-ray scattering were employed to provide both complementary and orthogonal information on (1) particle size and size distribution, (2) particle concentrations, (3) molecular conjugation properties (i.e., conformation and surface packing density), and (4) colloidal stability. Results show that SH-PEGs were conjugated on the surface of AuNPs to form a brush-like polymer corona. The surface packing density of SH-PEG was ≈0.42 nm(-2) for the methyl-PEG-SH AuNPs, ≈0.26 nm(-2) for the amine-SH-PEG AuNPs, and ≈0.18 nm(-2) for the carboxylic-PEG-SH AuNPs before cold storage, approximately 10 % of its theoretical maximum value. The conformation of surface-bound SH-PEGs was then estimated to be in an intermediate state between brush-like and random-coiled, based on the measured thicknesses in liquid and in dry states. By analyzing the change in particle size distribution and number concentration in suspension following cold storage, the long term colloidal stability of AuNPs was shown to be significantly improved via functionalization with SH-PEG, especially in the case of methyl-PEG-SH and carboxylic-PEG-SH (i.e., we estimate that >80 % of SH-PEG5K remained on the surface of AuNPs during storage). The work described here provides a generic strategy to track and analyze the material properties of functional AuNPs intended for biomedical applications, and highlights the importance of a multi-technique analysis. The effects of long term storage on the physical state of the particles, and on the stability of the ligand-AuNP conjugates, are employed to demonstrate the capacity of this approach to address critical issues relevant to clinical applications.