Photoluminescence of ZnO/ZnMgO heterostructure nanobelts grown by MBE.

ZnO nanobelts may grow with their polar axis perpendicular to growth direction. Heterostructured nanobelts therefore contain hetero-interfaces along the polar axis of ZnO where polarisation mismatch may induce electron confinement. These interfaces run along the length of the nanobelts. Such heterostructure nanobelts are grown by molecular beam epitaxy and TEM images confirm the core-shell structure. The effects of shell-growth temperature on nano-heterostructures is investigated using photoluminescence and secondary ion mass spectrometry in a focussed ion-beam microscope with Ne+ as the primary ion beam. We perform low temperature photoluminescence on ensembles of such heterostructures and single nanostructures. We show how single nanobelts have photoluminescence spectra rich in features and attribute these to band misalignment at ZnO/ZnMgO interfaces embedded within nano-heterostructures.

Strong Light-Field Driven Nanolasers.

Einstein established the quantum theory of radiation and paved the way for modern laser physics including single-photon absorption by charge carriers and finally pumping an active gain medium into population inversion. This can be easily understood in the particle picture of light. Using intense, ultrashort pulse lasers, multiphoton pumping of an active medium has been realized. In this nonlinear interaction regime, excitation and population inversion depend not only on the photon energy but also on the intensity of the incident pumping light, which can be still described solely by the particle picture of light. We demonstrate here that lowering significantly the pump photon energy further still enables population inversion and lasing in semiconductor nanowires. The extremely high electric field of the pump bends the bands and enables tunneling of electrons from the valence to the conduction band. In this regime, the light acts by the classical Coulomb force and population inversion is entirely due to the wave nature of electrons, thus the excitation becomes independent of the frequency but solely depends on the incident intensity of the pumping light.

Improving gas sensing by CdTe decoration of individual Aerographite microtubes.

Novel gas sensors have been realized by decorating clusters of tubular Aerographite with CdTe using magnetron sputtering techniques. Subsequently, individual microtubes were separated and electrically contacted on a SiO2/Si substrate with pre-patterned electrodes. Cathodoluminescence, electron microscopy and electrical characterization prove the successful formation of a polycrystalline CdTe thin film on Aerographite enabling an excellent gas response to ammonia. Furthermore, the dynamical response to ammonia exposure has been investigated, highlighting the quick response and recovery times of the sensor, which is highly beneficial for extremely short on/off cycles. Therefore, this gas sensor reveals a large potential for cheap, highly selective, reliable and low-power gas sensors, which are especially important for hazardous gases such as ammonia.

Dynamical Tuning of Nanowire Lasing Spectra.

Realizing visionary concepts of integrated photonic circuits, nanospectroscopy, and nanosensing will tremendously benefit from dynamically tunable coherent light sources with lateral dimensions on the subwavelength scale. Therefore, we demonstrate an individual nanowire laser based device which can be gradually tuned by reversible length changes of the nanowire such that uniaxial tensile stress is applied to the respective semiconductor gain material. By straining the device, the spontaneous excitonic emission of the nanowire shifts to lower energies caused by the bandgap reduction of the semiconductor. Moreover, the optical gain spectrum of the nanolaser can be precisely strain-tuned in the high excitation regime. The tuning of the emission does not affect the laser threshold of the device, which is very beneficial for practical applications. The applied length change furthermore adjusts the laser resonances inducing a redshift of the longitudinal modes. Thus, this concept of gradually and dynamically tunable nanolasers enables controlling and modulating the coherent emission on the nanoscale without changing macroscopic ambient conditions. This concept holds therefore huge impact on nanophotonic switches and photonic circuit technology.

Emission enhancement of erbium in a reverse nanofocusing waveguide.

Since Purcell's seminal report 75 years ago, electromagnetic resonators have been used to control light-matter interactions to make brighter radiation sources and unleash unprecedented control over quantum states of light and matter. Indeed, optical resonators such as microcavities and plasmonic antennas offer excellent control but only over a limited spectral range. Strategies to mutually tune and match emission and resonator frequency are often required, which is intricate and precludes the possibility of enhancing multiple transitions simultaneously. In this letter, we report a strong radiative emission rate enhancement of Er3+-ions across the telecommunications C-band in a single plasmonic waveguide based on the Purcell effect. Our gap waveguide uses a reverse nanofocusing approach to efficiently enhance, extract and guide emission from the nanoscale to a photonic waveguide while keeping plasmonic losses at a minimum. Remarkably, the large and broadband Purcell enhancement allows us to resolve Stark-split electric dipole transitions, which are typically only observed under cryogenic conditions. Simultaneous radiative emission enhancement of multiple quantum states is of great interest for photonic quantum networks and on-chip data communications.

Tuning nanowire lasers via hybridization with two-dimensional materials.

Mixed-dimensional hybrid structures have recently gained increasing attention as promising building blocks for novel electronic and optoelectronic devices. In this context, hybridization of semiconductor nanowires with two-dimensional materials could offer new ways to control and modulate lasing at the nanoscale. In this work, we deterministically fabricate hybrid mixed-dimensional heterostructures composed of ZnO nanowires and MoS2 monolayers with micrometer control over their relative position. First, we show that our deterministic fabrication method does not degrade the optical properties of the ZnO nanowires. Second, we demonstrate that the lasing wavelength of ZnO nanowires can be tuned by several nanometers by hybridization with CVD-grown MoS2 monolayers. We assign this spectral shift of the lasing modes to an efficient carrier transfer at the heterointerface and the subsequent increase of the optical band gap in ZnO (Moss-Burstein effect).

In-Operando Nanoscale X-ray Analysis Revealing the Local Electrical Properties of Rubidium-Enriched Grain Boundaries in Cu(In,Ga)Se2 Solar Cells.

Chalcogenide Cu(In,Ga)Se2 solar cells yield one of the highest efficiencies among all thin-film photovoltaics. However, the variability of the absorber compositions and incorporated alkali elements strongly affect the conversion efficiency. Thus, effective strategies for spatially resolved tracking of the alkali concentration and composition during operation are needed to alleviate this limitation. Here, using a hard X-ray nanoprobe, we apply a synergistic approach of X-ray fluorescence analysis and X-ray beam-induced current techniques under operando conditions. The simultaneous monitoring of both compositional and functional properties in complete solar cells illustrates the exceptional capabilities of this combination of techniques in top-view geometry, where high spatial resolution resulted even underneath the electrical contacts. Our observations reveal Rb agglomerations in selected areas and compositional variations between different grains and their boundaries. The concurrent detection of the functionality exhibits negligible effects on the collection efficiency for Rb-enriched grain boundaries in comparison to their neighboring grains, which indicates the passivation of detrimental defects.

Polarization Dependent Excitation and High Harmonic Generation from Intense Mid-IR Laser Pulses in ZnO.

The generation of high order harmonics from femtosecond mid-IR laser pulses in ZnO has shown great potential to reveal new insight into the ultrafast electron dynamics on a few femtosecond timescale. In this work we report on the experimental investigation of photoluminescence and high-order harmonic generation (HHG) in a ZnO single crystal and polycrystalline thin film irradiated with intense femtosecond mid-IR laser pulses. The ellipticity dependence of the HHG process is experimentally studied up to the 17th harmonic order for various driving laser wavelengths in the spectral range 3-4 µm. Interband Zener tunneling is found to exhibit a significant excitation efficiency drop for circularly polarized strong-field pump pulses. For higher harmonics with energies larger than the bandgap, the measured ellipticity dependence can be quantitatively described by numerical simulations based on the density matrix equations. The ellipticity dependence of the below and above ZnO band gap harmonics as a function of the laser wavelength provides an efficient method for distinguishing the dominant HHG mechanism for different harmonic orders.

Hot electrons in a nanowire hard X-ray detector.

Nanowire chip-based electrical and optical devices such as biochemical sensors, physical detectors, or light emitters combine outstanding functionality with a small footprint, reducing expensive material and energy consumption. The core functionality of many nanowire-based devices is embedded in their p-n junctions. To fully unleash their potential, such nanowire-based devices require - besides a high performance - stability and reliability. Here, we report on an axial p-n junction GaAs nanowire X-ray detector that enables ultra-high spatial resolution (~200 nm) compared to micron scale conventional ones. In-operando X-ray analytical techniques based on a focused synchrotron X-ray nanobeam allow probing the internal electrical field and observing hot electron effects at the nanoscale. Finally, we study device stability and find a selective hot electron induced oxidization in the n-doped segment of the p-n junction. Our findings demonstrate capabilities and limitations of p-n junction nanowires, providing insight for further improvement and eventual integration into on-chip devices.

Conversionless efficient and broadband laser light diffusers for high brightness illumination applications.

Laser diodes are efficient light sources. However, state-of-the-art laser diode-based lighting systems rely on light-converting inorganic phosphor materials, which strongly limit the efficiency and lifetime, as well as achievable light output due to energy losses, saturation, thermal degradation, and low irradiance levels. Here, we demonstrate a macroscopically expanded, three-dimensional diffuser composed of interconnected hollow hexagonal boron nitride microtubes with nanoscopic wall-thickness, acting as an artificial solid fog, capable of withstanding ~10 times the irradiance level of remote phosphors. In contrast to phosphors, no light conversion is required as the diffuser relies solely on strong broadband (full visible range) lossless multiple light scattering events, enabled by a highly porous (>99.99%) non-absorbing nanoarchitecture, resulting in efficiencies of ~98%. This can unleash the potential of lasers for high-brightness lighting applications, such as automotive headlights, projection technology or lighting for large spaces.

Overall Distribution of Rubidium in Highly Efficient Cu(In,Ga)Se2 Solar Cells.

Thin-film solar cells based on Cu(In,Ga)Se2 (CIGS) absorbers have achieved conversion efficiencies close to 23%. Such a high performance could be reached by incorporating heavy alkali elements into the CIGS absorber using an alkali fluoride post-deposition treatment (PDT). In order to improve the understanding of the effect of the PDT, we investigated a highly efficient CIGS solar cell whose absorber was subjected to a RbF-PDT. By applying synchrotron-based X-ray fluorescence analysis in combination with scanning transmission electron microscopy and electron backscatter diffraction to a cross-sectional lamella of the whole device, we were able to correlate the local composition of the absorber with its microstructure. The incorporated Rb accumulates at grain boundaries, with a random misorientation of the adjacent grains, at the p-n junction, and at the interface between the absorber and the MoSe2 layer. The accumulation of Rb at the grain boundaries is accompanied by a reduced Cu concentration and slightly increased In and Se concentrations. Additionally, variations in the local composition of the absorber at the p-n junction indicate the formation of a secondary phase, which exhibits a laterally inhomogeneous distribution. The improved solar cell performance due to RbF-PDT can thus be expected to originate from a favorable modification of the back contact interface, the random grain boundaries, the p-n junction, or a combination of these effects.