RESUMO
On-surface synthesis has become a prominent method for growing low-dimensional carbon-based nanomaterials on metal surfaces. However, the necessity of decoupling organic nanostructures from metal substrates to exploit their properties requires either transfer methods or new strategies to perform reactions directly on inert surfaces. The use of on-surface light-induced reactions directly on semiconductor/insulating surfaces represents an alternative approach to address these challenges. Here, exploring the photochemical activity of different organic molecules on a SnSe semiconductor surface under ultra-high vacuum, we present a novel on-surface light-induced reaction. The selective photodissociation of the anhydride group is observed, releasing CO and CO2. Moreover, we rationalize the relationship between the photochemical activity and the π-conjugation of the molecular core. The different experimental behaviour of two model anhydrides was elucidated by theoretical calculations, showing how the molecular structure influences the distribution of the excited states. Our findings open new pathways for on-surface synthesis directly on technologically relevant substrates.
RESUMO
A gold surface is functionalized by chemisorption of the enantiopure N,N'-bis-[2,2';5',2â³]tert-thiophene-5-yl methylcyclohexane-1,2-diamine (2T3N), a chiral oligothiophene derivative, via overnight incubation in a 2T3N ethanol solution. The Au|2T3N interface is characterized by x-ray photoelectron circular dichroism and comparing x-ray photoemission spectroscopy and electro-desorption results. Charge transmission at the Au|2T3N| solution interface is characterized by recording the cyclic voltammetry of the Fe(III)/Fe(II) reversible redox couple, finding a charge transfer rate constant, k°, variation from 1 × 10-1 to 3.3 × 10-2 cm s-1, when comparing the bare Au and the Au|2T3N interfaces, respectively. The "anomalous" high value of k° found for the chiral Au|2T3N interface can be rationalized on the basis of the chiral-induced spin selectivity effect, as further proved by magnetic-conductive atomic force microscopy measurements at room temperature. A spin polarization of about 30% is found.
RESUMO
The exothermic hydrogen transfer from H2 to CO2·+ leading to H and HCO2+ is investigated in a combined experimental and theoretical work. The experimental mass/charge ratios of the ionic product (HCO2+) and the ionic reactant (CO2·+) are recorded as a function of the photoionization energy of the synchrotron radiation. Theoretical density functional calculations and variational transition state theory are employed and adapted to analyze the energetic and the kinetics of the reaction, which turns out to be barrierless and with nonthermal rate coefficients controlled by nonstatistical processes. This study aims to understand the mechanisms and energetics that drive the reactivity of the elementary reaction of CO2·+ with H2 in different processes.
RESUMO
SO2 has been proposed in solar geoengineering as a precursor of H2 SO4 aerosol, a cooling agent active in the stratosphere to contrast climate change. Atmospheric ionization sources can ionize SO2 into excited states of S O 2 · + , which quickly reacts with trace gases in the stratosphere. In this work we explore the reaction of H 2 D 2 with S O 2 · + excited by tunable synchrotron radiation, leading to H S O 2 + + H ( D S O 2 + + D ), where H contributes to O3 depletion and OH formation. Density Functional Theory and Variational Transition State Theory have been used to investigate the dynamics of the title barrierless and exothermic reaction. The present results suggest that solar geoengineering models should test the reactivity of S O 2 · + with major trace gases in the stratosphere, such as H2 since this is a relevant channel for the OH formation during the nighttime when there is not OH production by sunlight. OH oxides SO2 , triggering the chemical reactions leading to H2 SO4 aerosol.
RESUMO
The improved performance of third-generation light sources and the advent of next-generation synchrotron radiation facilities require the use of extremely precise monitoring of the main photon-beam parameters, such as position, absolute and relative intensity, and temporal structure. These parameters, and associated real-time feedbacks, are fundamental at the beamline control level and at the machine control level, to improve the stability of the photon beams and to provide bunch-to-bunch quantitative information. Fast response time, high radiation hardness and visible-blind response are main features of photon-beam monitors for VUV and X-ray synchrotron radiation beamlines; hence diamond-based detectors are outstanding candidates. Here, results are presented of an extensive measurement campaign aiming at optimizing the capabilities of diamond detectors to discern time structures below the 100â ps timescale. A custom-built device has been fabricated and tested at the Italian Synchrotron Radiation Laboratory Elettra in Trieste. The results obtained show that diamond is an excellent material for ultra-fast photon pulses with picosecond time resolution; finally the possibilities for application at free-electron laser sources are discussed.
RESUMO
This investigation delves into the complex interaction at metal-semiconductor interfaces, highlighting the magnetic proximity effect in Ni/Si interfaces through systematic X-ray magnetic circular dichroism (XMCD) studies at Ni and Si edges. We analyzed two Ni/Si heterostructures with differing semiconductor doping, uncovering a magnetic proximity effect manifesting as equilibrium magnetization in the semiconductor substrate induced by the adjacent Ni layer. Our results display distinct magnetization signs corresponding to the doping levels: low-doped samples show parallel alignment to the Ni layer, while high-doped samples align antiparallel, indicating a nuanced interplay of underlying magnetization mechanisms. These findings pinpoint the roles of electron tunneling and exchange splitting modification in the magnetization behavior. The study enriches the understanding of ferromagnetic-semiconductor interface behavior, setting a precedent for the design of advanced spintronic devices that leverage the nuanced magnetic properties of these hybrid systems.
RESUMO
Objective.Detectors that can provide accurate dosimetry for microbeam radiation therapy (MRT) must possess intrinsic radiation hardness, a high dynamic range, and a micron-scale spatial resolution. In this work we characterize hydrogenated amorphous silicon detectors for MRT dosimetry, presenting a novel combination of flexible, ultra-thin and radiation-hard features.Approach.Two detectors are explored: an n-type/intrinsic/p-type planar diode (NIP) and an NIP with an additional charge selective layer (NIP + CSC).Results.The sensitivity of the NIP + CSC detector was greater than the NIP detector for all measurement conditions. At 1 V and 0 kGy under the 3T Cu-Cu synchrotron broadbeam, the NIP + CSC detector sensitivity of (7.76 ± 0.01) pC cGy-1outperformed the NIP detector sensitivity of (3.55 ± 0.23) pC cGy-1by 219%. The energy dependence of both detectors matches closely to the attenuation coefficient ratio of silicon against water. Radiation damage measurements of both detectors out to 40 kGy revealed a higher radiation tolerance in the NIP detector compared to the NIP + CSC (17.2% and 33.5% degradations, respectively). Percentage depth dose profiles matched the PTW microDiamond detector's performance to within ±6% for all beam filtrations except in 3T Al-Al due to energy dependence. The 3T Cu-Cu microbeam field profile was reconstructed and returned microbeam width and peak-to-peak values of (51 ± 1)µm and (405 ± 5)µm, respectively. The peak-to-valley dose ratio was measured as a function of depth and agrees within error to the values obtained with the PTW microDiamond. X-ray beam induced charge mapping of the detector revealed minimal dose perturbations from extra-cameral materials.Significance.The detectors are comparable to commercially available dosimeters for quality assurance in MRT. With added benefits of being micron-sized and possessing a flexible water-equivalent substrate, these detectors are attractive candidates for quality assurance,in-vivodosimetry and in-line beam monitoring for MRT and FLASH therapy.
Assuntos
Radiometria , Silício , Silício/química , Radiometria/instrumentação , Hidrogênio , Radioterapia/instrumentaçãoRESUMO
BACKGROUND: The increasing use of complex and high dose-rate treatments in radiation therapy necessitates advanced detectors to provide accurate dosimetry. Rather than relying on pre-treatment quality assurance (QA) measurements alone, many countries are now mandating the use of in vivo dosimetry, whereby a dosimeter is placed on the surface of the patient during treatment. Ideally, in vivo detectors should be flexible to conform to a patient's irregular surfaces. PURPOSE: This study aims to characterize a novel hydrogenated amorphous silicon (a-Si:H) radiation detector for the dosimetry of therapeutic x-ray beams. The detectors are flexible as they are fabricated directly on a flexible polyimide (Kapton) substrate. METHODS: The potential of this technology for application as a real-time flexible detector is investigated through a combined dosimetric and flexibility study. Measurements of fundamental dosimetric quantities were obtained including output factor (OF), dose rate dependence (DPP), energy dependence, percentage depth dose (PDD), and angular dependence. The response of the a-Si:H detectors investigated in this study are benchmarked directly against commercially available ionization chambers and solid-state diodes currently employed for QA practices. RESULTS: The a-Si:H detectors exhibit remarkable dose linearities in the direct detection of kV and MV therapeutic x-rays, with calibrated sensitivities ranging from (0.580 ± 0.002) pC/cGy to (19.36 ± 0.10) pC/cGy as a function of detector thickness, area, and applied bias. Regarding dosimetry, the a-Si:H detectors accurately obtained OF measurements that parallel commercially available detector solutions. The PDD response closely matched the expected profile as predicted via Geant4 simulations, a PTW Farmer ionization chamber and a PTW ROOS chamber. The most significant variation in the PDD performance was 5.67%, observed at a depth of 3 mm for detectors operated unbiased. With an external bias, the discrepancy in PDD response from reference data was confined to ± 2.92% for all depths (surface to 250 mm) in water-equivalent plastic. Very little angular dependence is displayed between irradiations at angles of 0° and 180°, with the most significant variation being a 7.71% decrease in collected charge at a 110° relative angle of incidence. Energy dependence and dose per pulse dependence are also reported, with results in agreement with the literature. Most notably, the flexibility of a-Si:H detectors was quantified for sample bending up to a radius of curvature of 7.98 mm, where the recorded photosensitivity degraded by (-4.9 ± 0.6)% of the initial device response when flat. It is essential to mention that this small bending radius is unlikely during in vivo patient dosimetry. In a more realistic scenario, with a bending radius of 15-20 mm, the variation in detector response remained within ± 4%. After substantial bending, the detector's photosensitivity when returned to a flat condition was (99.1 ± 0.5)% of the original response. CONCLUSIONS: This work successfully characterizes a flexible detector based on thin-film a-Si:H deposited on a Kapton substrate for applications in therapeutic x-ray dosimetry. The detectors exhibit dosimetric performances that parallel commercially available dosimeters, while also demonstrating excellent flexibility results.
Assuntos
Radiometria , Silício , Radiometria/instrumentação , Hidrogênio , Dosimetria in Vivo , Terapia por Raios X/instrumentação , HumanosRESUMO
A study of (R)-3-methylcyclopentanone [(R)-3-MCP] by photoelectron spectroscopy and photoelectron circular dichroism (PECD) is presented. The synchrotron radiation gas-phase photoelectron spectra of (R)-3-MCP were measured and are discussed on the basis of different theoretical methodologies. The experimental dichroism of (R)-3-MCP for selected deconvoluted valence states and for the carbonyl carbon 1s core state are reported and reproduced well by calculated dispersions generated by considering the contributions of two different conformers. The theoretical dichroic parameters are calculated by employing a multicentre basis set of B-spline functions and a Kohn-Sham Hamiltonian. Temperature-dependent PECD studies of the HOMO state and the carbonyl carbon 1s core level allowed the separation of the contributions of each conformer by photoelectron dichroism. This new approach clearly shows how the PECD methodology is sensitive to conformational and structural changes of unoriented (R)-3-MCP in the gas phase, opening up new perspectives in the characterisation of chiral molecular systems.
Assuntos
Ciclopentanos/química , Dicroísmo Circular , Conformação Molecular , Espectroscopia Fotoeletrônica , Teoria Quântica , Estereoisomerismo , TemperaturaRESUMO
Sulfur-based molecules producing self-assembled monolayers on gold surfaces have long since become relevant functional molecular materials with many applications in biosensing, electronics, and nanotechnology. Among the various sulfur-containing molecules, the possibility to anchor a chiral sulfoxide to a metal surface has been scarcely investigated, despite this class of molecules being of great importance as ligands and catalysts. In this work, (R)-(+)-methyl p-tolyl sulfoxide was deposited on Au(111) and investigated by means of photoelectron spectroscopy and density functional theory calculations. The interaction with Au(111) leads to a partial dissociation of the adsorbate due to S-CH3 bond cleavage. The observed kinetics support the hypotheses that (R)-(+)-methyl p-tolyl sulfoxide adsorbs on Au(111) in two different adsorption arrangements endowed with different adsorption and reaction activation energies. The kinetic parameters related to the adsorption/desorption and reaction of the molecule on the Au(111) surface have been estimated.
RESUMO
Objective. Microbeam radiation therapy (MRT) is an alternative emerging radiotherapy treatment modality which has demonstrated effective radioresistant tumour control while sparing surrounding healthy tissue in preclinical trials. This apparent selectivity is achieved through MRT combining ultra-high dose rates with micron-scale spatial fractionation of the delivered x-ray treatment field. Quality assurance dosimetry for MRT must therefore overcome a significant challenge, as detectors require both a high dynamic range and a high spatial resolution to perform accurately.Approach. In this work, a series of radiation hard a-Si:H diodes, with different thicknesses and carrier selective contact configurations, have been characterised for x-ray dosimetry and real-time beam monitoring applications in extremely high flux beamlines utilised for MRT at the Australian Synchrotron.Results. These devices displayed superior radiation hardness under constant high dose-rate irradiations on the order of 6000 Gy s-1, with a variation in response of 10% over a delivered dose range of approximately 600 kGy. Dose linearity of each detector to x-rays with a peak energy of 117 keV is reported, with sensitivities ranging from (2.74 ± 0.02) nC/Gy to (4.96 ± 0.02) nC/Gy. For detectors with 0.8µm thick active a-Si:H layer, their operation in an edge-on orientation allows for the reconstruction of micron-size beam profiles (microbeams). The microbeams, with a nominal full-width-half-max of 50µm and a peak-to-peak separation of 400µm, were reconstructed with extreme accuracy. The full-width-half-max was observed as 55 ± 1µm. Evaluation of the peak-to-valley dose ratio and dose-rate dependence of the devices, as well as an x-ray induced charge (XBIC) map of a single pixel is also reported.Significance. These devices based on novel a-Si:H technology possess a unique combination of accurate dosimetric performance and radiation resistance, making them an ideal candidate for x-ray dosimetry in high dose-rate environments such as FLASH and MRT.
Assuntos
Silício , Síncrotrons , Raios X , Austrália , Radiometria/métodosRESUMO
In this paper, by means of high-resolution photoemission, soft X-ray absorption and atomic force microscopy, we investigate, for the first time, the mechanisms of damaging, induced by neutron source, and recovering (after annealing) of p-i-n detector devices based on hydrogenated amorphous silicon (a-Si:H). This investigation will be performed by mean of high-resolution photoemission, soft X-Ray absorption and atomic force microscopy. Due to dangling bonds, the amorphous silicon is a highly defective material. However, by hydrogenation it is possible to reduce the density of the defect by several orders of magnitude, using hydrogenation and this will allow its usage in radiation detector devices. The investigation of the damage induced by exposure to high energy irradiation and its microscopic origin is fundamental since the amount of defects determine the electronic properties of the a-Si:H. The comparison of the spectroscopic results on bare and irradiated samples shows an increased degree of disorder and a strong reduction of the Si-H bonds after irradiation. After annealing we observe a partial recovering of the Si-H bonds, reducing the disorder in the Si (possibly due to the lowering of the radiation-induced dangling bonds). Moreover, effects in the uppermost coating are also observed by spectroscopies.
RESUMO
A photoelectron circular dichroism (CD) study of the valence states of 2-amino-1-propanol (alaninol) in the gas phase is presented. The aim of the investigation is to reveal conformer population effects in the valence-state photoelectron spectrum. The experimental dispersion of the dichroic D parameter of valence states as a function of the photon excitation energy is compared with its theoretical value calculated by employing a multicentric basis set of B-spline functions and a Kohn-Sham Hamiltonian. The theoretical values are in very good agreement with the experimental data when the conformer population distribution is taken into account. Moreover, thanks to a comparison between experiment and theory, a clear assignment of the molecular orbital character and conformer geometry is given to the features of the photoelectron spectrum. This work indicates in a detailed experimental analysis that CD in photoelectron spectroscopy is an effective technique to disentangle the conformer assignment in photoelectron spectra.
RESUMO
The study of transition metal coordination complexes has played a key role in establishing quantum chemistry concepts such as that of ligand field theory. Furthermore, the study of the dynamics of their excited states is of primary importance in determining the de-excitation path of electrons to tailor the electronic properties required for important technological applications. This work focuses on femtosecond transient absorption spectroscopy of Cobalt tris(acetylacetonate) (Co(AcAc)3) in solution. The fast transient absorption spectroscopy has been employed to study the excited state dynamics after optical excitation. Density functional theory coupled with the polarizable continuum model has been used to characterize the geometries and the electronic states of the solvated ion. The excited states have been calculated using the time dependent density functional theory formalism. The time resolved dynamics of the ligand to metal charge transfer excitation revealed a biphasic behavior with an ultrafast rise time of 0.07 ± 0.04 ps and a decay time of 1.5 ± 0.3 ps, while the ligand field excitations dynamics is characterized by a rise time of 0.07 ± 0.04 ps and a decay time of 1.8 ± 0.3 ps. Time dependent density functional theory calculations of the spin-orbit coupling suggest that the ultrafast rise time can be related to the intersystem crossing from the originally photoexcited state. The picosecond decay is faster than that of similar cobalt coordination complexes and is mainly assigned to internal conversion within the triplet state manifold. The lack of detectable long living states (>5 ps) suggests that non-radiative decay plays an important role in the dynamics of these molecules.
RESUMO
The adsorption of a single molecule of the D-enantiomer of alaninol (2-amino-1-propanol) on the surface of Cu(100) is investigated through density functional theory calculations. Different possible adsorption sites for D-alaninol are tested, and it is found that the most stable configuration presents both amino and hydroxyl group covalently interacting with "on top" copper atoms. The electronic structure is analyzed in detail and compared with experimental photoelectron spectra. Another adsorption structure in which a dehydrogenation process is assumed to occur on the amino group is analyzed and provides a possible explanation of the valence band electronic structure and of the experimentally observed N 1s core-level shift at full coverage, where a self-assembled ordered chiral monolayer is formed on the copper surface.
Assuntos
Simulação por Computador , Cobre/química , Modelos Químicos , Propanolaminas/química , Adsorção , Análise Espectral/métodos , Estereoisomerismo , Propriedades de SuperfícieRESUMO
We report the results of chemisorption in saturating conditions of D-alaninol on Cu(100) in term of the analysis of low-energy electron diffraction and scanning tunneling microscopy data. A large two-dimensional, single domain, ordered chiral structure of quadrangular tetrameric molecular units is formed. The four molecules interact differently with the surface in the two orthogonal directions.
RESUMO
In the present work, we studied the photoinduced ion chemistry of the halogenated pyrimidines, a class of prototype radiosensitizing molecules, in the energy region 9-15 eV. The work was stimulated by previous studies on inner shell site-selective fragmentation of the pyrimidine molecule, which have shown that the fragmentation is governed by the population/formation of specific ionic states with a hole in valence orbitals, which in turn correlate to accessible dissociation limits. The combined experimental and theoretical study of the appearance energies of the main fragments provides information on the geometric structure of the products and on the role played by the specific halogen atom and the site of halogenation in the dissociation process. This information can be used to gain new insights on the elementary mechanisms that could possibly explain the enhanced radiation damage to the DNA bases or to the medium in which the bases are embedded, thereby contributing to their radiosensitizing effect.
Assuntos
Espectrometria de Massas/métodos , Pirimidinas/química , Pirimidinas/efeitos da radiação , Raios Ultravioleta , Halogenação , Modelos Moleculares , FotóliseRESUMO
Asymmetric molecular and supramolecular systems are characterized by: i. the circular dicroism in the angular distribution of valence photoelectrons emitted from randomly oriented chiral molecules by their interaction with circularly polarized VUV light; ii. the different stability and reactivity of diastereomeric aggregates. Both these aspects may have some relationship with the "chiral enrichment mechanism" of chirogenesis, based on the preferential destruction of one enantiomer of a racemate by interaction with a chiral agent, whether a massive species or a circularly polarized photon. The most recent spectroscopic and mass spectrometric studies on this topic are reported in the present mini-review.
Assuntos
Íons/análise , Íons/química , Isomerismo , Espectrometria de Massas/métodos , Fótons , Espectrometria de Massas por Ionização por Electrospray/métodosRESUMO
Circular dichroism in the angular distribution of valence photoelectrons emitted from randomly oriented 3-hydroxytetrahydrofuran enantiomers (ThS and ThR) has been observed in gas-phase experiments using circularly polarized vacuum ultraviolet (VUV) light. The measured dichroism for both ThS and ThR, acquired at the single magic angle theta=234.73 degrees and at photon energies of 22, 19, 16, and 14 eV, points to an asymmetric forward-backward scattering of the photoelectrons from their highest occupied molecular orbitals (HOMO) HOMO-1 and HOMO-2, of up to 5%, depending on the photon energy. The asymmetry reverses on exchange of either the helicity of the radiation or the configuration of Th. The photoionization dichroic D parameters of ThS and ThR have been measured and their values discussed in the light of LCAO B-spline density functional theory (DFT) predictions. While an acceptable agreement is found between the dichroic parameter measured and calculated at the highest photon energy for the HOMO and HOMO-2 orbitals of Th, a significant discrepancy is observed for the HOMO-1 state which is attributed to the floppiness of Th, in particular to the comparatively large sensitivity of the size and shape of its HOMO-1 on nuclear vibrational motion.
Assuntos
Furanos/química , Dicroísmo Circular , Elétrons , EstereoisomerismoRESUMO
We have measured for the first time the X-ray natural circular dichroism (XNCD) of a chiral molecule in an isotropic medium. In this condition the only surviving term contributing to CD is the cross product between the electric dipole and the magnetic dipole transition moments. The non-zero value of the magnetic dipole transition moment in a 1s-to-valence electron transition is attributed to contribution of valence states to core molecular orbitals. These results open the way to a "local" chiral molecular analysis and to the study of stereochemically selected photochemical processes.