Higher efficiency of vanadate iron in heterogeneous Fenton-like systems to pretreat sugarcane bagasse and its enzymatic saccharification.

Pretreatment is crucial for effective enzymatic saccharification of lignocellulose such as sugarcane bagasse (SCB). In the present study, SCB was pretreated with five kinds of heterogeneous Fenton-like systems (HFSs), respectively, in which α-FeOOH, α-Fe2O3, Fe3O4, and FeS2 worked as four traditional heterogeneous Fenton-like catalysts (HFCs), while FeVO4 worked as a novel HFC. The enzymatic reducing sugar conversion rate was then compared among SCB after different heterogeneous Fenton-like pretreatments (HFPs), and the optimal HFS and pretreatment conditions were determined. The mechanism underlying the difference in saccharification efficiency was elucidated by analyzing the composition and morphology of SCB. Moreover, the ion dissolution characteristics, variation of pH and Eh values, H2O2 and hydroxyl radical (·OH) concentration of FeVO4 and α-Fe2O3 HFSs were compared. The results revealed that the sugar conversion rate of SCB pretreated with FeVO4 HFS reached up to 58.25%, which was obviously higher than that under other HFPs. In addition, the surface morphology and composition of the pretreated SCB with FeVO4 HFS were more conducive to enzymatic saccharification. Compared with α-Fe2O3, FeVO4 could utilize H2O2 more efficiently, since the dissolved Fe3+ and V5+ can both react with H2O2 to produce more ·OH, resulting in a higher hemicellulose and lignin removal rate and a higher enzymatic sugar conversion rate. It can be concluded that FeVO4 HFP is a promising approach for lignocellulose pretreatment.

Two-in-One Role of Benzophenone in Photoinduced C(sp3)-H Monofluoralkenylation: Hydrogen-Atom Transfer and Single-Electron Transfer.

A new protocol for monofluoralkenylation of C(sp3)-H bonds with gem-difluoroalkenes was reported. In this protocol, benzophenone serves as a photocatalyst with dual roles of hydrogen-atom transfer and single-electron transfer. The excited state of benzophenone abstracts a hydrogen atom from a C(sp3)-H bond to generate a corresponding carbon radical, which subsequently undergoes a radical addition/SET/ß-F elimination process rather than radical-radical cross-coupling of previous work. This reaction shows high regioselectivity for the α-carbon atoms of ethers, thioethers, and amines, enabling the preparation of monofluoroalkenes.

Three-Component Domino Reaction of Thioamide, Isonitriles, and Water: Selective Synthesis of 1,2,4-Thiadiazolidin-3-ones and (E)-N-(1,2-Diamino-2-thioxoethylidene)benzamides.

The three-component domino reaction of thioamides, benzyl isocyanide, and water in the presence of a catalytic amount of both Pd(dppf)Cl2 and Cu(OAc)2 afforded novel 1,2,4-thiadiazolidin-3-one cyclic compounds, whereas the same reaction with tertiary alkylisonitriles in the presence of rare earth metal salt [La(OTf)3] resulted in (E)-N-(1,2-diamino-2-thioxoethylidene)benzamide open-chain products. This divergent reaction enabled the one-pot construction of five (N-S, C-S, C-O, and two C-N) or four (C-S, C-N, C-O, and C-C) new chemical bonds. Mechanism studies indicate that the oxygen atom of the product was derived from H2O.

Graphene plasmonic spatial light modulator for reconfigurable diffractive optical neural networks.

Terahertz (THz) diffractive optical neural networks (DONNs) highlight a new route toward intelligent THz imaging, where the image capture and classification happen simultaneously. However, the state-of-the-art implementation mostly relies on passive components and thus the functionalities are limited. The reconfigurability can be achieved through spatial light modulators (SLMs), while it is not clear what device specifications are required and how challenging the associated device implementation is. Here, we show that a complex-valued modulation with a π/2 phase modulation in an active reflective graphene-plasmonics-based SLM can be employed for realizing the reconfigurability in THz DONNs. By coupling the plasmonic resonance in graphene nanoribbons with the reflected Fabry-Pérot (F-P) mode from a back reflector, we achieve a minor amplitude modulation of large reflection and a substantial π/2 phase modulation. Furthermore, the constructed reconfigurable reflective THz DONNs consisting of designed SLMs demonstrate >94.0% validation accuracy of the MNIST dataset. The results suggest that the relaxation of requirements on the specifications of SLMs should significantly simplify and enable varieties of SLM designs for versatile DONN functionalities.

Demonstration of an ultra-compact 8-channel sinusoidal silicon waveguide array for optical phased array.

Here we demonstrate an ultra-compact 8-channel sinusoidal silicon waveguide array for an optical phased array. In our device, based on sinusoidal bending, the cross talk (CT) between waveguides can be efficiently reduced with a waveguide pitch of only 695 nm. For the transverse electric (TE) mode, the simulation results show that the insertion loss (IL) of the 100-µm-long device is 0.1 dB and the CT between all waveguides is lower than -25 dB at 1550 nm. In the measurements, an IL of less than 1 dB and CT lower than -18 dB are obtained. Since the pitch is related to the beam-steering range and power consumption of the optical phased array, such an ultra-compact device could potentially be a good candidate to build the emitter for an energy-efficient optical phased array with a large field of view.

Transradial versus transfemoral access without closure device for transarterial chemoembolization in patients with hepatocellular carcinoma: a randomized trial.

OBJECTIVES: To compare patient satisfaction, procedural variables, and safety with transradial access (TRA) and transfemoral access (TFA) in patients undergoing transarterial chemoembolization (TACE) for hepatocellular carcinoma (HCC). MATERIALS AND METHODS: From February 2019 to August 2021, 130 patients undergoing TACE for HCC were randomly allocated to the TRA (n = 65) or TFA (n = 65) group. Vascular closure devices were not used after TFA-TACE. All patients completed the post-catheterization questionnaire and 8-item Short-Form Health Survey 1 day after TACE. RESULTS: Technical success rate, crossover rate, contrast agent dose, fluoroscopy time, procedure time, air kerma, dose-area product, length of hospital stay, and total cost were similar between the two groups (all p > 0.05). The incidence and severity of adverse events were also similar between the two groups (all p > 0.05). However, overall discomfort, difficulty going to the bathroom, difficulty feeding or self-caring, difficulty walking, general health, physical function, role physical function, social function, mental health, and role emotional function were better in the TRA group than in the TFA group (all p < 0.001). Consequently, more patients preferred the current access for their next procedure in the TRA group than in the TFA group (90.8% vs. 24.6%; p < 0.001). CONCLUSION: In patients undergoing TACE for HCC, using TRA instead of TFA can improve patient satisfaction without compromising procedural variables and safety. KEY POINTS: • Transradial access (TRA) enabled early ambulation after transarterial chemoembolization (TACE), resulting in significant increase in activities of daily living and health-related quality of life (HRQoL) compared to transfemoral access (TFA) when vascular closure devices were not used. • Procedural variables (contrast agent dose, fluoroscopy time, procedure time, air kerma, dose-area product, length of hospital stay, and total cost) were not significantly different between patients who received TRA-TACE and TFA-TACE. • The incidence and severity of adverse events were similar between patients who received TRA-TACE and TFA-TACE.

Recent advances in photochemical construction of aromatic C-P bonds via C-hetero bond cleavage.

Photochemical synthesis is flourishing in recent years, which has provided new and efficient methods for aromatic C-P bond formation. This review summarises the recent advances in photochemical C-P bond cross-couplings in aromatics, enriching the synthetic methods of phosphorus containing compounds. Photosensitizer-catalyzed and photosensitizer-free reactions are reviewed. Different types of bond cleavages for substrates, such as C-X (X = F, Cl, Br, I), C-N and C-O bond cleavage, are discussed in three categories.

Coupling without Coupling Reactions: En Route to Developing Phenols as Sustainable Coupling Partners via Dearomatization-Rearomatization Processes.

Transition-metal-catalyzed cross-coupling reactions represent one of the most straightforward and efficient protocols to assemble two different molecular motifs for the construction of carbon-carbon or carbon-heteroatom bonds. Because of their importance and wide applications in pharmaceuticals, agrochemicals, materials, etc., cross-coupling reactions have been well recognized in the 2010 Nobel Prize in chemistry. However, in the classical transition-metal-catalyzed cross-coupling reactions (e.g., the Suzuki-Miyaura, the Buchwald-Hartwig, and the Ullmann cross-coupling reactions), organohalides, which mainly stem from the nonrenewable fossil resources, are often utilized as coupling partners with halide wastes being generated after the reactions. To make cross-coupling reactions more sustainable, we initiated a general research program by employing phenols and cyclohexa(e)nones (the reduced forms of phenols) as pivotal feedstocks (coupling partners), instead of the commonly used fossil-derived organohalides, for cross-coupling reactions to build C-O, C-N, and C-C bonds. Phenols (cyclohexa(e)nones) are widely available and can be obtained from lignin biomass, highlighting their renewable and sustainable features. Moreover, water is expected to be the only stoichiometric byproduct, thus avoiding halide wastes.Notably, the cross-coupling reactions utilizing phenols/cyclohexa(e)nones are not based on the traditional transition-metal-catalyzed "oxidative-addition and reductive-elimination" mechanism, but via a novel "phenol-cyclohexanone" redox couple. This new working mechanism opens up new horizons of designing cross-coupling reactions via simple nucleophilic addition of cyclohexanones along with aromatization processes, thereby simplifying the design and avoiding laborious optimization of transition-metal precursors (e.g., Pd, Ni, Cu, etc.), as well as ligands in classical transition-metal-catalyzed cross-coupling reactions. Specifically, in this Account, we will summarize and discuss our related research work in the following three categories: "formal oxidative couplings of cyclohexa(e)nones", "formal reductive couplings of phenols", and "formal redox-neutral couplings of phenols". The successes of these research projects clearly demonstrated our initial inspirations and rational designs to develop cross-coupling reactions without the "conventional cross-coupling conditions" by pushing the reaction frontiers from initial cyclohexanones, ultimately, to the sustainable phenol targets.

Dearomatization-Rearomatization Strategy for ortho-Selective Alkylation of Phenols with Primary Alcohols.

Phenols are common precursors and core structures of a variety of industrial chemicals ranging from pharmaceuticals to polymers. However, the synthesis of site-specifically substituted phenols is challenging, and thus the development of new methods for this purpose would be highly desirable. Reported here is a protocol for palladium-catalyzed ortho-selective alkylation reactions of phenols with primary alcohols by a dearomatization-rearomatization strategy, with water as the sole by-product. Various substituted phenols and primary alcohols were compatible with the standard reaction conditions. The detailed mechanism of this transformation was also investigated.

Design of an ultra-compact low-crosstalk sinusoidal silicon waveguide array for optical phased array.

In this work, an ultra-compact low-crosstalk sinusoidal silicon waveguide array is proposed and analyzed. We first design a pair of low-crosstalk sinusoidal silicon waveguides with a pitch of 695 nm, where the sinusoidal bends are the key to reduce the crosstalk between waveguides. Then, based on this idea, we propose a low-crosstalk sinusoidal silicon waveguide array with a 695 nm pitch. The simulation results show that for an array length of 100 µm, the insertion loss is as low as 0.08 dB, and the crosstalk is lower than -26 dB at 1550 nm. The 695 nm pitch waveguide array also exhibits a favorable fabrication error tolerance when taking into account the waveguide width variations in practice. Moreover, within the acceptable range of crosstalk, the center-to-center distance between adjacent waveguides of this array can be further reduced to 615 nm. Since the pitch is related to the power consumption and beam-steering range of the optical phased array, our design provides an effective method to build the emitter for an energy-efficient optical phased array with a large field of view.

Two-in-One Strategy for Palladium-Catalyzed C-H Functionalization in Water.

Transition metal catalyzed C-H functionalizations have been developed as powerful methods for C-C bond formations. Directing groups, removable directing groups, traceless directing groups, and transient directing groups (TDGs) have been successfully used to improve the reaction efficiencies. For the development of greener and more sustainable methods, C-H functionalization using a TDG that also serves as a reagent in aqueous solvent was investigated. The palladium-catalyzed C-H functionalization of tryptamine derivatives using ketones in water successfully generated tetrahydro-ß-carbolines with a quaternary carbon center at C1. Deuterium-labeling experiments are discussed to provide insight into the mechanism. The C2-position of pyridine was also successfully functionalized by this strategy.

Palladium-Catalyzed Formal Cross-Coupling of Diaryl Ethers with Amines: Slicing the 4-O-5 Linkage in Lignin Models.

Lignin is the second most abundant organic matter on Earth, and is an underutilized renewable source for valuable aromatic chemicals. For future sustainable production of aromatic compounds, it is highly desirable to convert lignin into value-added platform chemicals instead of using fossil-based resources. Lignins are aromatic polymers linked by three types of ether bonds (α-O-4, ß-O-4, and 4-O-5 linkages) and other C-C bonds. Among the ether bonds, the bond dissociation energy of the 4-O-5 linkage is the highest and the most challenging to cleave. To date, 4-O-5 ether linkage model compounds have been cleaved to obtain phenol, cyclohexane, cyclohexanone, and cyclohexanol. The first example of direct formal cross-coupling of diaryl ether 4-O-5 linkage models with amines is reported, in which dual C(Ar)-O bond cleavages form valuable nitrogen-containing derivatives.

Concurrent sorafenib therapy extends the interval to subsequent TACE for patients with unresectable hepatocellular carcinoma.

BACKGROUND AND OBJECTIVES: To compare the impact of concurrent TACE + sorafenib versus TACE alone on overall survival (OS) and time to progression (TTP) in patients with unresectable hepatocellular carcinoma (uHCC). A secondary goal was to determine if sorafenib use increases the interval between courses of TACE. METHODS: This study enrolled 150 patients with uHCC from June 2011 to June 2014, including 50 treated with TACE + sorafenib and 100 treated with TACE alone. Factors associated with OS and TTP were identified by univariate and multivariate Cox-regression model analyses. Average TACE interval was defined as TTP/TACE frequency. RESULTS: The median OS (21.7 vs. 11.5 months) and TTP (10.2 vs. 6.7 months) were longer in the TACE + sorafenib group compared to the TACE group. Patients receiving combination therapy had higher survival rate (P < 0.032) and longer average interval to TACE (P < 0.001), but lower progression rate (P < 0.001). TACE + sorafenib therapy was associated with improved OS (P ≤ 0.009) and TTP (P ≤ 0.021). The majority of AEs identified in patients receiving the combination therapy were classified as Grades 1 and 2, and skin-related reactions and fatigue were the most common. CONCLUSION: Concurrent sorafenib with TACE provides survival benefits over TACE monotherapy, which may be related to a prolonged interval between subsequent TACE courses. J. Surg. Oncol. 2016;113:672-677. © 2016 Wiley Periodicals, Inc.

Photo-induced Metal-Catalyst-Free Aromatic Finkelstein Reaction.

The facile iodination of aromatic compounds under mild conditions is a great challenge for both organic and medicinal chemistry. Particularly, the synthesis of functionalized aryl iodides by light has long been considered impossible due to their photo-lability, which actually makes aryl iodides popular starting materials in many photo-substitution reactions. Herein, a photo-induced halogen exchange in aryl or vinyl halides has been discovered for the first time. A broad scope of aryl iodides can be prepared in high yields at room temperature under exceptionally mild conditions without any metal or photo-redox catalysts. The presence of a catalytic amount of elemental iodine could promote the reaction significantly.

Rhodium(I)-catalyzed regiospecific dimerization of aromatic acids: two direct C-H bond activations in water.

2,2'-Diaryl acids are key building blocks for some of the most important and high-performance polymers such as polyesters and polyamides (imides), as well as structural motifs of MOFs (metal-organic frameworks) and biological compounds. In this study, a direct, regiospecific and practical dimerization of simple aromatic acids to generate 2,2'-diaryl acids has been discovered, which proceeds through two rhodium-catalyzed C-H activations in water. This reaction can be easily scaled up to gram level by using only 0.4-0.6 mol % of the rhodium catalyst. As a proof-of-concept, the natural product ellagic acid was synthesized in two steps by this method.

Formal Direct Cross-Coupling of Phenols with Amines.

The transition-metal-catalyzed amination of aryl halides has been the most powerful method for the formation of aryl amines over the past decades. Phenols are regarded as ideal alternatives to aryl halides as coupling partners in cross-couplings. An efficient palladium-catalyzed formal cross-coupling of phenols with various amines and anilines has now been developed. A variety of substituted phenols were compatible with the standard reaction conditions. Secondary and tertiary aryl amines could thus be synthesized in moderate to excellent yields.

A complete switch of the directional selectivity in the annulation of 2-hydroxybenzaldehydes with alkynes.

Controlling reaction selectivity is an eternal pursuit for chemists working in chemical synthesis. As part of this endeavor, our group has been exploring the possibility of constructing different natural product skeletons from the same simple starting materials by using different catalytic systems. In our previous work, an isoflavanone skeleton was obtained from the annulation of a salicylaldehyde and an alkyne when a gold catalyst was employed. In this paper, it is shown that a coumarin skeleton can be efficiently obtained through an annulation reaction with the same starting materials, that is, terminal alkynes and salicylaldehydes, by simply switching to a rhodium catalyst. A plausible reaction mechanism is proposed for this new annulation based on isotopic substitution experiments.

Visible-light-induced catalyst-free reductive coupling of aldehydes, ketones and imines with cyanopyridines.

This article introduces a reductive coupling driven by visible-light, facilitating the synthesis of pyridine-substituted alcohols and amines through the reaction of aldehydes, ketones and imines with cyanopyridines. Hantzsch esters serve as reductants in this process, eliminating the need for transition-metals or photosensitizers. The method demonstrates extensive compatibility and finds utility in the late-stage functionalization of both natural and pharmaceutical products, offering a sustainable pathway for the diversification of chemical compounds.

Precolumn derivatization LC-MS/MS method to simultaneous quantitation of 10 monosaccharides in rat plasma.

Monosaccharides are essential for maintaining the normal physiological functions of living organisms. Under disease states, metabolic disorders in vivo will inevitably affect the levels of monosaccharides, which brings the possibility of monosaccharides as a biomarker of some diseases. In this study, a method was developed and validated for simultaneously determining 10 monosaccharides (glucose, galactose, mannose, rhamnose, fucose, xylose, iduronic acid, glucuronic acid, N-acetylgalactosamine and N-acetylglucosamine) in SD rat plasma using liquid chromatography-tandem mass spectrometry. The method employed 1-phenyl-3-methyl-5-pyrazolone (PMP) as a derivatization reagent, considerably improved the chromatographic retention and ionization efficiency of monosaccharides. After protein precipitation of plasma samples, monosaccharides and isotope internal standards were derivatized and liquid-liquid extraction was performed to remove excess PMP. To achieve the baseline separation of several isomers, the resulting derivatives were chromatographed on a Bridged ethyl hybrid (BEH) Phenyl column using gradient elution with a total run time of 8 min. The method was linear within the range of 0.0100-5.00 µg/mL for rhamnose, 0.0500-25.0 µg/mL for fucose, xylose, iduronic acid, glucuronic acid, N-acetylgalactosamine and N-acetylglucosamine, 1.00-500 µg/mL for galactose, 10.0-5000 µg/mL for mannose, and 50.0-25,000 µg/mL for glucose. And the accuracy and precision verification of surrogate matrix samples and plasma samples met the required criteria. The method has been used successfully to study the effect of hepatic insufficiency on monosaccharide levels in rats. It was found that the concentration of glucuronic acid in SD rat plasma was abnormally increased in rats with liver injury.

Optimization framework of sediment phosphate oxygen isotope pretreatment method based on large-scale application: A case study of Fuyang River basin.

Phosphate oxygen isotope (δ18OP) technique is an effective tool to identify the source and transformation process of phosphorus. The poor applicability of existing δ18OP pretreatment methods for sediments hindered the large-scale application of δ18OP technology. This paper presents an optimization framework for the pretreatment of sediment δ18OP samples based on large-scale applications, using the Fuyang River Basin as a case study. The typical channel landscape outflow lake, South Lake, was selected as the most favorable point for assessing the applicability and optimizing the mainstream δ18OP pretreatment method, which was achieved by clarifying the sediment environmental characteristics of South Lake. To evaluate the suitability of the Blake and McLaughlin methods in South Lake, a comparative study was carried out based on five dimensions: phosphorus recovery rate, removal efficiency of organic matter, removal efficiency of extraction liquid impurity ion, experimental time, and reagent consumption cost. The findings demonstrated that the Blake method outperformed the McLaughlin method across all five dimensions. Based on the environmental characteristics of the sediments of South Lake, the Blake method was optimized from two perspectives, namely the substitution of reagents and adjustment and optimization of experimental procedures. This resulted in an enhancement of phosphorus recovery and organic matter removal efficiency, while also reducing the experimental time required. The optimized method also yielded satisfactory results when applied to the entire watershed. This research paper can thus offer valuable technical support for the widespread application of sediment δ18OP technology.