RESUMO
Double-perovskite oxides have attracted recent attention due to their attractive functionalities and application potential. In this paper, we demonstrate the effect of dual controls, i.e., the deposition pressure of oxygen (PO2) and lattice mismatch (ε), on tuning magnetic properties in epitaxial double-perovskite Sr2FeReO6 films. In a nearly lattice matched Sr2FeReO6/SrTiO3 film, the ferrimagnetic-to-paramagnetic phase transition occurs when PO2 is reduced to 30 mTorr, probably due to the formation of Re4+ ions that replace the stoichiometric Re5+ to cause disorders of B-site ions. On the other hand, a large compressive strain or tensile strain shifts this critical PO2 to below 1 mTorr or above 40 mTorr, respectively. The observations can be attributed to the modulation of B-site ordering by epitaxial strain through affecting elemental valence. Our results provide a feasible way to expand the functional tunability of magnetic double-perovskite oxides that hold great promise for spintronic devices.
RESUMO
We report the control of the interplane magnetic exchange coupling in CaIrO3 perovskite thin films and superlattices with SrTiO3. By analyzing the anisotropic magneto-transport data, we demonstrate that a semimetallic paramagnetic CaIrO3 turns into a canted antiferromagnetic Mott insulator at reduced dimensions. The emergence of a biaxial magneto-crystalline anisotropy indicates the canted moment responding to the cubic symmetry. Extending to superlattices and probing oxygen octahedral rotation by half-integer X-ray Braggs diffraction, a more complete picture about the canted moment evolution with interplane coupling can be understood. Remarkably, a rotation of the canted moments' easy axes by 45° is also observed by a sign reversal of the in-plane strain. These results demonstrate the robustness of anisotropic magnetoresistance in revealing quasi two-dimensional canted antiferromagnets, as well as valuable insights about quadrupolar magnetoelastic coupling, relevant for designing future antiferromagnetic spintronic devices.
RESUMO
Using interlayer interaction to control functional heterostructures with atomic-scale designs has become one of the most effective interface-engineering strategies nowadays. Here, we demonstrate the effect of a crystalline LaFeO3 buffer layer on amorphous and crystalline LaAlO3/SrTiO3 heterostructures. The LaFeO3 buffer layer acts as an energetically favored electron acceptor in both LaAlO3/SrTiO3 systems, resulting in modulation of interfacial carrier density and hence metal-to-insulator transition. For amorphous and crystalline LaAlO3/SrTiO3 heterostructures, the metal-to-insulator transition is found when the LaFeO3 layer thickness crosses 3 and 6 unit cells, respectively. Such different critical LaFeO3 thicknesses are explained in terms of distinct characteristic lengths of the redox-reaction-mediated and polar-catastrophe-dominated charge transfer, controlled by the interfacial atomic contact and Thomas-Fermi screening effect, respectively. Our results not only shed light on the complex interlayer charge transfer across oxide heterostructures but also provide a new route to precisely tailor the charge-transfer process at a functional interface.
RESUMO
Exploring exotic interface magnetism due to charge transfer and strong spin-orbit coupling has profound application in the future development of spintronic memory. Here, the emergence and tuning of topological Hall effect (THE) from a CaMnO3 /CaIrO3 /CaMnO3 trilayer structure are studied in detail, which suggests the presence of magnetic Skyrmion-like bubbles. First, by tilting the magnetic field direction, the evolution of the Hall signal suggests a transformation of Skyrmions into topologically-trivial stripe domains, consistent with behaviors predicted by micromagnetic simulations. Second, by varying the thickness of CaMnO3 , the optimal thicknesses for the THE signal emergence are found, which allow identification of the source of Dzyaloshinskii-Moriya interaction (DMI) and its competition with antiferromagnetic superexchange. Employing high-resolution transmission electron microscopy, randomly distributed stacking faults are identified only at the bottom interface and may avoid mutual cancellation of DMI. Last, a spin-transfer torque experiment also reveals a low threshold current density of ≈109 A m-2 for initiating the bubbles' motion. This discovery sheds light on a possible strategy for integrating Skyrmions with antiferromagnetic spintronics.
RESUMO
Infinite-layer Nd_{1-x}Sr_{x}NiO_{2} thin films with Sr doping level x from 0.08 to 0.3 are synthesized and investigated. We find a superconducting dome x between 0.12 and 0.235 accompanied by a weakly insulating behavior in both under- and overdoped regimes. The dome is akin to that in the electron-doped 214-type and infinite-layer cuprate superconductors. For x≥0.18, the normal state Hall coefficient (R_{H}) changes the sign from negative to positive as the temperature decreases. The temperature of the sign changes decreases monotonically with decreasing x from the overdoped side and approaches the superconducting dome at the midpoint, suggesting a reconstruction of the Fermi surface with the dopant concentration across the dome.
RESUMO
Since the discovery of two-dimensional electron gas (2DEG) at the oxide interface of LaAlO3/SrTiO3 (LAO/STO), improving carrier mobility has become an important issue for device applications. In this paper, by using an alternate polar perovskite insulator (La0.3Sr0.7) (Al0.65Ta0.35)O3 (LSAT) for reducing lattice mismatch from 3.0% to 1.0%, the low-temperature carrier mobility has been increased 30 fold to 35,000 cm(2) V(-1) s(-1). Moreover, two critical thicknesses for the LSAT/STO (001) interface are found, one at 5 unit cells for appearance of the 2DEG and the other at 12 unit cells for a peak in the carrier mobility. By contrast, the conducting (110) and (111) LSAT/STO interfaces only show a single critical thickness of 8 unit cells. This can be explained in terms of polar fluctuation arising from LSAT chemical composition. In addition to lattice mismatch and crystal symmetry at the interface, polar fluctuation arising from composition has been identified as an important variable to be tailored at the oxide interfaces to optimize the 2DEG transport.
RESUMO
We report the first observation of the coexistence of a distinct midgap state and a Mott state in undoped and their evolution in electron and hole-doped ambipolar Y_{0.38}La_{0.62}(Ba_{0.82}La_{0.18})_{2}Cu_{3}O_{y} films using spectroscopic ellipsometry and x-ray absorption spectroscopies at the O K and Cu L_{3,2} edges. Supported by theoretical calculations, the midgap state is shown to originate from antiferromagnetic correlation. Surprisingly, while the magnetic state collapses and its correlation strength weakens with dopings, the Mott state in contrast moves toward a higher energy and its correlation strength increases. Our result provides important clues to the mechanism of electronic correlation strengths and superconductivity in cuprates.
RESUMO
The ability to change states using voltage in ferroelectric tunnel junctions (FTJs) offers a route for lowering the switching energy of memories. Enhanced tunneling electroresistance in FTJ can be achieved by asymmetric electrodes or introducing metal-insulator transition interlayers. However, a fundamental understanding of the role of each interface in a FTJ is lacking and compatibility with integrated circuits has not been explored adequately. Here, we report an incisive study of FTJ performance with varying asymmetry of the electrode/ferroelectric interfaces. Surprisingly high TER (â¼400%) can be achieved at BaTiO3 layer thicknesses down to two unit cells (â¼0.8 nm). Further our results prove that band offsets at each interface in the FTJs control the TER ratio. It is found that the off state resistance (R(Off)) increases much more rapidly with the number of interfaces compared to the on state resistance (ROn). These results are promising for future low energy memories.
RESUMO
The origin of insulating ferromagnetism in epitaxial LaCoO3 films under tensile strain remains elusive despite extensive research efforts are devoted. Surprisingly, the spin state of its Co ions, the main parameter of its ferromagnetism, is still to be determined. Here, the spin state in epitaxial LaCoO3 thin films is systematically investigated to clarify the mechanism of strain-induced ferromagnetism using element-specific X-ray absorption spectroscopy and dichroism. Combining with the configuration interaction cluster calculations, it is unambiguously demonstrated that Co3+ in LaCoO3 films under compressive strain (on LaAlO3 substrate) is practically a low-spin state, whereas Co3+ in LaCoO3 films under tensile strain (on SrTiO3 substrate) have mixed high-spin and low-spin states with a ratio close to 1:3. From the identification of this spin state ratio, it is inferred that the dark strips observed by high-resolution scanning transmission electron microscopy indicate the position of Co3+ high-spin state, i.e., an observation of a spin state disproportionation in tensile-strained LaCoO3 films. This consequently explains the nature of ferromagnetism in LaCoO3 films. The study highlights the importance of spin state degrees of freedom, along with thin-film strain engineering, in creating new physical properties that do not exist in bulk materials.
RESUMO
We report the observation of superconductivity in infinite-layer Ca-doped LaNiO2 (La1-xCaxNiO2) thin films and construct their phase diagram. Unlike the metal-insulator transition in Nd- and Pr-based nickelates, the undoped and underdoped La1-xCaxNiO2 thin films are entirely insulating from 300 K down to 2 K. A superconducting dome is observed at 0.15 < x < 0.3 with weakly insulating behavior at the overdoped regime. Moreover, the sign of the Hall coefficient RH changes at low temperature for samples with a higher doping level. However, distinct from the Nd- and Pr-based nickelates, the RH-sign-change temperature remains at around 35 K as the doping increases, which begs further theoretical and experimental investigation to reveal the role of the 4f orbital to the (multi)band nature of the superconducting nickelates. Our results also emphasize a notable role of lattice correlation on the multiband structures of the infinite-layer nickelates.
RESUMO
The magnetic Weyl fermion originates from the time reversal symmetry (TRS)-breaking in magnetic crystalline structures, where the topology and magnetism entangle with each other. Therefore, the magnetic Weyl fermion is expected to be effectively tuned by the magnetic field and electrical field, which holds promise for future topologically protected electronics. However, the electrical field control of the magnetic Weyl fermion has rarely been reported, which is prevented by the limited number of identified magnetic Weyl solids. Here, the electric field control of the magnetic Weyl fermion is demonstrated in an epitaxial SrRuO3 (111) thin film. The magnetic Weyl fermion in the SrRuO3 films is indicated by the chiral anomaly induced magnetotransport, and is verified by the observed Weyl nodes in the electronic structures characterized by the angle-resolved photoemission spectroscopy (ARPES) and first-principles calculations. Through the ionic-liquid gating experiment, the effective manipulation of the Weyl fermion by electric field is demonstrated, in terms of the sign-change of the ordinary Hall effect, the nonmonotonic tuning of the anomalous Hall effect, and the observation of the linear magnetoresistance under proper gating voltages. The work may stimulate the searching and tuning of Weyl fermions in other magnetic materials, which are promising in energy-efficient electronics.
RESUMO
Neurogenic bladder disorders are common among patients with spinal cord lesions, which often result in upper and lower urinary tract complications. Urinary tract infection has remained the most frequent type of infection in this population. Our aim is to review systematically the literature on the outcome of different intervention methods to reduce urinary tract infection incidence. A literature search was conducted in the database of Medline, PubMed, Embase, and Scopus. After screening 1559 articles, 42 were included in this review. The intervention methods can be categorized into the four following groups: (1) indwelling catheterization and intermittent catheterization, (2) medications, (3) surgery, and (4) others. Intermittent catheterization is still the most recommended treatment for persons with spinal cord lesions. Hydrophilic catheters are more suitable for adults than children because of complex handling. Bladder management with spontaneous voiding is initially considered for infants and toddlers with spina bifida. Antibiotics treatment should be based on the results of urine cultures. Shortening the course of antibiotics treatment can reduce its adverse effects but may increase urinary tract infection recurrence. Because botulinum toxin injections and bladder surgery can improve urodynamic function, both are conducive toward lowering urinary tract infection incidence.
Assuntos
Doenças da Medula Espinal/complicações , Bexiga Urinaria Neurogênica/complicações , Cateterismo Urinário/métodos , Infecções Urinárias/prevenção & controle , Procedimentos Cirúrgicos Urológicos/métodos , Agentes Urológicos/uso terapêutico , Adolescente , Adulto , Antibacterianos/administração & dosagem , Toxinas Botulínicas/administração & dosagem , Criança , Pré-Escolar , Feminino , Humanos , Incidência , Lactente , Masculino , Pessoa de Meia-Idade , Traumatismos da Medula Espinal/complicações , Resultado do Tratamento , Bexiga Urinaria Neurogênica/etiologia , Infecções Urinárias/epidemiologia , Infecções Urinárias/etiologia , Adulto JovemRESUMO
Electrical control of material properties based on ionic liquids (IL) has seen great development and emerging applications in the field of functional oxides, mainly understood by the electrostatic and electrochemical gating mechanisms. Compared to the fast, flexible, and reproducible electrostatic gating, electrochemical gating is less controllable owing to the complex behaviors of ion migration. Here, the interface-dependent oxygen migration by electrochemical gating is resolved at the atomic scale in the LaAlO3-SrTiO3 system through ex situ IL gating experiments and on-site atomic-resolution characterization. The difference between interface structures leads to the controllable electrochemical oxygen migration by filling oxygen vacancies. The findings not only provide an atomic-scale insight into the origin of interface-dependent electrochemical gating but also demonstrate an effective way of engineering interface structure to control the electrochemical gating.
RESUMO
Disorder-induced magnetoresistance (MR) effect is quadratic at low perpendicular magnetic fields and linear at high fields. This effect is technologically appealing, especially in 2D materials such as graphene, since it offers potential applications in magnetic sensors with nanoscale spatial resolution. However, it is a great challenge to realize a graphene magnetic sensor based on this effect because of the difficulty in controlling the spatial distribution of disorder and enhancing the MR sensitivity in the single-layer regime. Here, a room-temperature colossal MR of up to 5000% at 9 T is reported in terraced single-layer graphene. By laminating single-layer graphene on a terraced substrate, such as TiO2 -terminated SrTiO3 , a universal one order of magnitude enhancement in the MR compared to conventional single-layer graphene devices is demonstrated. Strikingly, a colossal MR of >1000% is also achieved in the terraced graphene even at a high carrier density of ≈1012 cm-2 . Systematic studies of the MR of single-layer graphene on various oxide- and non-oxide-based terraced surfaces demonstrate that the terraced structure is the dominant factor driving the MR enhancement. The results open a new route for tailoring the physical property of 2D materials by engineering the strain through a terraced substrate.
RESUMO
Charge localization is critical to the control of charge dynamics in systems such as perovskite solar cells, organic-, and nanostructure-based photovoltaics. However, the precise control of charge localization via electronic transport or defect engineering is challenging due to the complexity in reaction pathways and environmental factors. Here, charge localization in optimal-doped La1.85 Sr0.15 CuO4 thin-film on SrTiO3 substrate (LSCO/STO) is investigated, and also a high-energy plasmon is observed. Charge localization manifests as a near-infrared mid-gap state in LSCO/STO. This is ascribed to the interfacial hybridization between the Ti3d-orbitals of the substrate and O2p-orbitals of the film. The interfacial effect leads to significant changes in the many-body correlations and local-field effect. The local-field effect results in an inhomogeneous charge distribution, and due to perturbation by an external field, the high polarizability of this nonuniform charge system eventually generates the high-energy plasmon. Transformation of the electronic correlations in LSCO/STO is further demonstrated via temperature-dependent spectral-weight transfer. This study of charge localization in cuprates and interfacial hybridization provides important clues to their electronic structures and superconductive properties.
RESUMO
In this paper, poly(styrene-divinylbenzene) foams were synthesized using a high internal phase emulsion (HIPE) technique with Span 80 and with 900 °C calcined oyster shell powder as a co-emulsifier, 2,2'-azobisisobutyronitrile (AIBN) as an initiator and deionized water as the dispersing phase. SEM images revealed that the materials possess a hierarchical porous structure of nano/micro size, which resulted in saturated oil adsorption in only half a minute. The dispersing phase amount was investigated for its effect on adsorption. The optimized foams have 24.8-58.3 g g-1 adsorbencies for several organic solvents, and they demonstrated superhydrophobicity and excellent oleophilicity with the water contact angle (WCA) even close to 149° and oil contact angle approaching 0°. Moreover, the foams displayed high oil retention under pressure. The adsorption-centrifugation cycling results indicated high repeatability of the recovered foams. All of these features predicted the potential applications of superhydrophobic foams in oil-water separation.
RESUMO
While benefiting greatly from electronics, our society also faces a major problem of electronic waste, which has already caused environmental pollution and adverse human health effects. Therefore, recyclability becomes a must-have feature in future electronics. Here, we demonstrate an erasable and recreatable two-dimensional electron gas (2DEG), which can be easily created and patterned by depositing a water-dissolvable overlayer of amorphous Sr3Al2O6 (a-SAO) on SrTiO3 (STO) at room temperature. The 2DEG can be repeatedly erased or recreated by depositing the a-SAO or dissolving in water, respectively. Photoluminescence results show that the 2DEG arises from the a-SAO-induced oxygen vacancy. Furthermore, by gradually depleting the 2DEG, a transition of nonlinear to linear Hall effect is observed, demonstrating an unexpected interfacial band structure. The convenience and repeatability in the creation of the water-dissolvable 2DEG with rich physics could potentially contribute to the exploration of next generation electronics, such as environment-friendly or water-soluble electronics.
RESUMO
We present a new measurement method which can be used to image the gap nodal structure of superconductors whose pairing symmetry is under debate. This technique utilizes a high quality factor microwave resonance involving the sample of interest. While supporting a circularly symmetric standing wave current pattern, the sample is perturbed by a scanned laser beam, creating a photoresponse that was previously shown to reveal the superconducting gap anisotropy. Simulation and the measurement of the photoresponse of an unpatterned Nb film show less than 8% anisotropy, as expected for a superconductor with a nearly isotropic energy gap along with expected systematic uncertainty. On the other hand, measurement of a YBa2Cu3O7-δ thin film shows a clear 4-fold symmetric image with â¼12.5% anisotropy, indicating the well-known 4-fold symmetric dx2-y2 gap nodal structure in the ab-plane. The deduced gap nodal structure can be further cross-checked by low temperature surface impedance data, which are simultaneously measured. The important advantage of the presented method over the previous spiral resonator method is that it does not require a complicated lithographic patterning process which limits one from testing various kinds of materials due to photoresponse arising from patterning defects. This advantage of the presented technique, and the ability to measure unpatterned samples such as planar thin films and single crystals, enables one to survey the pairing symmetry of a wide variety of unconventional superconductors.
RESUMO
Interface-driven magnetic effects and phenomena associated with spin-orbit coupling and intrinsic symmetry breaking are of importance for fundamental physics and device applications. How interfaces affect the interplay between charge, spin, orbital, and lattice degrees of freedom is the key to boosting device performance. In LaMnO3 /SrTiO3 (LMO/STO) polar-nonpolar heterostructures, electronic reconstruction leads to an antiferromagnetic to ferromagnetic transition, making them viable for spin filter applications. The interfacial electronic structure plays a critical role in the understanding of the microscopic origins of the observed magnetic phase transition, from antiferromagnetic at 5 unit cells (ucs) of LMO or below to ferromagnetic at 6 ucs or above, yet such a study is missing. Here, an atomic scale understanding of LMO/STO ambipolar ferromagnetism is offered by quantifying the interface charge distribution and performing first-principles density functional theory (DFT) calculations across this abrupt magnetic transition. It is found that the electronic reconstruction is confined within the first 3 ucs of LMO from the interface, and more importantly, it is robust against oxygen nonstoichiometry. When restoring stoichiometry, an enhanced ferromagnetic insulating state in LMO films with a thickness as thin as 2 nm (5 uc) is achieved, making LMO readily applicable as barriers in spin filters.
RESUMO
The exciton, a quasi-particle that creates a bound state of an electron and a hole, is typically found in semiconductors. It has attracted major attention in the context of both fundamental science and practical applications. Transition metal dichalcogenides (TMDs) are a new class of 2D materials that include direct band-gap semiconductors with strong spin-orbit coupling and many-body interactions. Manipulating new excitons in semiconducting TMDs could generate a novel means of application in nanodevices. Here, the observation of high-energy excitonic peaks in the monolayer-MoS2 on a SrTiO3 heterointerface generated by a new complex mechanism is reported, based on a comprehensive study that comprises temperature-dependent optical spectroscopies and first-principles calculations. The appearance of these excitons is attributed to the change in many-body interactions that occurs alongside the interfacial orbital hybridization and spin-orbit coupling brought about by the excitonic effect propagated from the substrate. This has further led to the formation of a Fermi-surface feature at the interface. The results provide an atomic-scale understanding of the heterointerface between monolayer-TMDs and perovskite oxide and highlight the importance of spin-orbit-charge-lattice coupling on the intrinsic properties of atomic-layer heterostructures, which open up a way to manipulate the excitonic effects in monolayer TMDs via an interfacial system.