Integrated monitoring and prediction of thermal discharge from nuclear power plants using satellite, UAV, and numerical simulation.

Global nuclear power is surging ahead in its quest for global carbon neutrality, eyeing an anticipated installed capacity of 436 GW for coastal nuclear power plants by 2040. As these plants operate, they emit substantial amounts of warm water into the ocean, known as thermal discharge, to regulate the temperature of their nuclear reactors. This discharge has the potential to elevate the temperature of the surrounding seawater, potentially influencing the marine ecosystem in the discharge vicinity. Therefore, our study area is on the Qinshan and Jinqimen Nuclear Power Plants in China, employing a blend of Landsat 8/9, and unmanned aerial vehicle (UAV) imagery to gather sea surface temperature (SST) data. In situ measurements validate the temperature data procured through remote sensing. Leveraging these SST observations alongside hydrodynamic and meteorological data from field measurements, we input them into the MIKE 3 model to prognosticate the three-dimensional (3D) spatial distribution and temperature elevation resulting from thermal discharge. The findings reveal that (1) satellite remote sensing can instantly acquire the horizontal distribution of thermal discharge, but with a spatial resolution much lower than that of UAV. The spatial resolution of UAV is higher, but the imaging efficiency of UAV is only 1/40,000 of that of satellite remote sensing. (2) Numerical simulation models can predict the 3D spatial distribution of thermal discharge. Although UAV and satellite remote sensing cannot directly obtain the 3D spatial distribution of thermal discharge, using remotely sensed SST as the temperature field input for the MIKE 3 model can reduce the quantity of measured temperature data and lower the cost of numerical simulation. (3) In the process of monitoring and predicting the thermal discharge of nuclear power plants, achieving an effective balance between monitoring accuracy and cost can be realized by comprehensively considering the advantages and costs of satellite, UAV, and numerical simulation technologies.

Uncovering Photoelectronic and Photothermal Effects in Plasmon-Mediated Electrocatalytic CO2 Reduction.

Plasmon-mediated electrocatalysis that rests on the ability of coupling localized surface plasmon resonance (LSPR) and electrochemical activation, emerges as an intriguing and booming area. However, its development seriously suffers from the entanglement between the photoelectronic and photothermal effects induced by the decay of plasmons, especially under the influence of applied potential. Herein, using LSPR-mediated CO2 reduction on Ag electrocatalyst as a model system, we quantitatively uncover the dominant photoelectronic effect on CO2 reduction reaction over a wide potential window, in contrast to the leading photothermal effect on H2 evolution reaction at relatively negative potentials. The excitation of LSPR selectively enhances the CO faradaic efficiency (17-fold at -0.6 VRHE ) and partial current density (100-fold at -0.6 VRHE ), suppressing the undesired H2 faradaic efficiency. Furthermore, in situ attenuated total reflection-surface enhanced infrared absorption spectroscopy (ATR-SEIRAS) reveals a plasmon-promoted formation of the bridge-bonded CO on Ag surface via a carbonyl-containing C1 intermediate. The present work demonstrates a deep mechanistic understanding of selective regulation of interfacial reactions by coupling plasmons and electrochemistry.

Pan-cancer analysis of SYNGR2 with a focus on clinical implications and immune landscape in liver hepatocellular carcinoma.

BACKGROUND: Synaptogyrin-2 (SYNGR2), as a member of synaptogyrin gene family, is overexpressed in several types of cancer. However, the role of SYNGR2 in pan-cancer is largely unexplored. METHODS: From the TCGA and GEO databases, we obtained bulk transcriptomes, and clinical information. We examined the expression patterns, prognostic values, and diagnostic value of SYNGR2 in pan-cancer, and investigated the relationship of SYNGR2 expression with tumor mutation burden (TMB), microsatellite instability (MSI), immune infiltration, and immune checkpoint (ICP) genes. The gene set enrichment analysis (GSEA) software was used to perform pathway analysis. Besides, we built a nomogram of liver hepatocellular carcinoma patients (LIHC) and validated its prediction accuracy. RESULTS: SYNGR2 was highly expressed in most cancers. The high expression of SYNGR2 significantly reduced the overall survival (OS), disease-specific survival (DSS), disease-free interval (DFI), and progression-free interval (PFI) in multiple types of cancer. Also, receiver operating characteristic (ROC) curve analysis demonstrated that SYNGR2 showed high accuracy in distinguishing cancerous tissues from normal ones. Moreover, SYNGR2 expression was correlated with TMB, MSI, immune scores, and immune cell infiltrations. We also analyzed the association of SYNGR2 with immunotherapy response in LIHC. Finally, a nomogram including SYNGR2 and pathologic T, N, M stage was built and exhibited good predictive power for the OS, DSS, and PFI of LIHC patients. CONCLUSION: Overall, SYNGR2 is a critical oncogene in various tumors. SYNGR2 participates in the carcinogenic progression, and may contribute to the immune infiltration in tumor microenvironment. Our study suggests that SYNGR2 can serve as a predictor related to prognosis in pan-cancer, especially LIHC.

Sharp-Line Near-Infrared Emission from Tetrahedron-Occupied Ni2+ in Ca2GeO4.

As far as we are concerned, the phenomenon of Ni2+ luminescence in tetrahedral coordination has not been reported. For the first time, a new NIR phosphor Ca2GeO4:Ni2+ is developed in this work. It is found that the NIR emission from this phosphor is a sharp peak attributed to the unusual Ni2+-occupied GeO4 site in the lattice, instead of the conventional broadband luminescence of Ni2+ in the octahedrally coordinated site. Crystal-field analysis has been applied, and the parameters Dq, B, and Δ are calculated to reveal the relationship between the emission profile and the crystal field strength. The optimal Ni2+ doping concentration is found to be 1%. Ca2GeO4:Ni2+ provides an efficient sharp-line (fwhm = 16 nm) emission centered at 1164 nm which originates from the 1T2 → 3T1 transition with an internal quantum efficiency of 23.1% and a decay lifetime of about 300 µs. This work could provide some new insights to explore novel NIR luminescent materials based on transition-metal elements.

Achieving Ultra-Wideband NIR-II Emission in Cr3+-Doped Li(Sc,In)(Si,Ge)O4 Phosphors Based on Host Composition Engineering.

Realizing ultra-wideband and tunable near-infrared (NIR) emission remains a great challenge in NIR phosphor development. The luminescence of most reported NIR phosphors exhibits a peak wavelength shorter than 1000 nm and the corresponding FWHM is <200 nm. Here, a series of Cr3+-activated Li(Sc,In)(Si,Ge)O4 phosphors with ultra-wideband and tunable NIR-II emission are successfully developed based on the host composition engineering strategy. Significant spectral engineering in the NIR-II region is achieved with a peak wavelength changing from 1110 to 1253 nm. The olivine host structure could provide Cr3+ activator a highly distorted octahedral site with very weak crystal field strength, which results in NIR-II ultra-wideband emission with FWHM > 300 nm. A detailed discussion on the relationship between structural variation, crystal field splitting, and NIR luminescence has been applied. As far as we know, it is the first report about Cr3+ NIR luminescence engineering in such a long wavelength and wide range. The application of these NIR-II phosphors is demonstrated in intensity-based luminescent thermometry with a relative sensitivity of >2.0% K-1 in the physiological temperature range.

Effect of mobile-phase modifiers on the enantioselective retention behavior of methyl mandelate with an amylose 3,5-dimethylphenylcarbamate chiral stationary phase under reversed-phase conditions.

In this study, methanol, ethanol, n-propyl alcohol, isopropyl alcohol, acetone, and tert-butanol were used as organic modifiers in reversed-phase mode chiral liquid-chromatography to systematically investigate the effects of mobile phase components on the enantioselective retention behavior of methyl mandelate with immobilized amylose 3,5-dimethylphenylcarbamate-based sorbent called Chiralpak IA. A two-site enantioselective model was used to obtain information on the recognition mechanisms by observing the dependence of the enantioselectivity and retention factor difference on the modifier content. Similar enantioselective retention behaviors were observed for all modifiers, and characteristic modifier concentration points (PL , PM , and PH ) were identified. At modifier concentrations up to PM , the weakened hydrophobic environment resulted in polymer structural relaxation, which changed the recognition mechanisms. By contrast, at concentrations beyond PH , considerably different enantioselectivity behaviors were observed, indicating that the existence of dipole-dipole interaction, which was stronger at higher modifier concentrations, contributed to the retention mechanisms. The concentrations at which these characteristic points occurred were dependent on the carbon number of the modifier molecule. Modifiers with more carbon numbers facilitated the transition in the enantioselective behaviors. These results demonstrated that the proposed method can provide a physically consistent quantitative description of enantioselective retention behavior in reversed-phase mode.

Plasmonic Photoelectrochemical Coupling Reactions of para-Aminobenzoic Acid on Nanostructured Gold Electrodes.

Surface plasmon resonance (SPR) bridges photonics and photoelectrochemistry by providing an effective interaction between absorption and confinement of light to surface electrons of plasmonic metal nanostructures (PMNs). SPR enhances the Raman intensity enormously in surface-enhanced Raman spectroscopy (SERS) and leads to the plasmon-mediated chemical reaction on the surface of nanostructured metal electrodes. To observe variations in chemical reactivity and selectivity, we studied the SPR photoelectrochemical reactions of para-aminobenzoic acid (PABA) on nanostructured gold electrodes. The head-to-tail coupling product "4-[(4-imino-2,5-cyclohexadien-1-ylidene)amino]benzoic acid (ICBA)" and the head-to-head coupling product p,p'-azodibenzoate (ADBA) were obtained from PABA adsorbed on PMN-modified gold electrodes. In particular, under acidic and neutral conditions, ICBA was obtained as the main product, and ADBA was obtained as the minor product. At the same time, under basic conditions, ADBA was obtained as the major product, and ICBA was obtained as the minor product. We have also provided sufficient evidence for the oxidation of the tail-to-tail coupling reaction product that occurred in a nonaqueous medium rather than in an aqueous medium. The above finding was validated by the cyclic voltammetry, SERS, and theoretical calculation results of possible reaction intermediates, namely, 4-aminophenlylenediamine, 4-hydroxyphenlylenediamine, and benzidine. The theoretical adsorption model and experimental results indicated that PABA has been adsorbed as para-aminobenzoate on the gold cluster in a bidentate configuration. This work offers a new view toward the modulation of selective surface catalytic coupling reactions on PMN, which benefits the hot carrier transfer efficiency at photoelectrochemical interfaces.

A telerehabilitation programme in post-discharge COVID-19 patients (TERECO): a randomised controlled trial.

OBJECTIVES: To investigate superiority of a telerehabilitation programme for COVID-19 (TERECO) over no rehabilitation with regard to exercise capacity, lower limb muscle strength (LMS), pulmonary function, health-related quality of life (HRQOL) and dyspnoea. DESIGN: Parallel-group randomised controlled trial with 1:1 block randomisation. SETTING: Three major hospitals from Jiangsu and Hubei provinces, China. PARTICIPANTS: 120 formerly hospitalised COVID-19 survivors with remaining dyspnoea complaints were randomised with 61 allocated to control and 59 to TERECO. INTERVENTION: Unsupervised home-based 6-week exercise programme comprising breathing control and thoracic expansion, aerobic exercise and LMS exercise, delivered via smartphone, and remotely monitored with heart rate telemetry. OUTCOMES: Primary outcome was 6 min walking distance (6MWD) in metres. Secondary outcomes were squat time in seconds; pulmonary function assessed by spirometry; HRQOL measured with Short Form Health Survey-12 (SF-12) and mMRC-dyspnoea. Outcomes were assessed at 6 weeks (post-treatment) and 28 weeks (follow-up). RESULTS: Adjusted between-group difference in change in 6MWD was 65.45 m (95% CI 43.8 to 87.1; p<0.001) at post-treatment and 68.62 m (95% CI 46.39 to 90.85; p<0.001) at follow-up. Treatment effects for LMS were 20.12 s (95% CI 12.34 to 27.9; p<0.001) post-treatment and 22.23 s (95% CI 14.24 to 30.21; p<0.001) at follow-up. No group differences were found for lung function except post-treatment maximum voluntary ventilation. Increase in SF-12 physical component was greater in the TERECO group with treatment effects estimated as 3.79 (95% CI 1.24 to 6.35; p=0.004) at post-treatment and 2.69 (95% CI 0.06 to 5.32; p=0.045) at follow-up. CONCLUSIONS: This trial demonstrated superiority of TERECO over no rehabilitation for 6MWD, LMS, and physical HRQOL. TRIAL REGISTRATION NUMBER: ChiCTR2000031834.

Determining the Interfacial Refractive Index via Ultrasensitive Plasmonic Sensors.

Plasmonic sensors are promising for ultrasensitive chemical and biological analysis. However, there are increasing experimental findings that cannot be well addressed by theoretical calculations, including the nonlinear dependence of the plasmonic peak wavelength on the refractive index (RI) and the ultrahigh sensitivity beyond the theoretical limit. The gap between experiments and theoretical calculations is that the bulk RI (BRI) used for calculation could be different from the interfacial RI (IRI) determining the electromagnetic response as a result of the interaction of molecules with the surface. But there is still no method to determine the IRI. Herein, we quantitatively determine the IRI by disentangling the surface RI (SRI) from the BRI. The obtained IRI can be directly applied in theoretical calculations to reliably reflect the experimental response and rigorously guide the design of plasmonic sensors. Moreover, it can be a fundamental dimensionless number to describe the light-matter interaction at the interface.

Critical Roles of Doping Cl on Cu2O Nanocrystals for Direct Epoxidation of Propylene by Molecular Oxygen.

Direct epoxidation of propylene by molecular oxygen alone is one of the "dream reactions" in heterogeneous catalysis. Despite much effort, the yield of propylene epoxide is still too low to be commercially attractive due to the trade-off between conversion and selectivity. Here, we demonstrate that doping Cl into the lattice of Cu2O nanocrystals by the intergrowth method not only can enhance the catalytic selectivity and conversion of direct propylene epoxidation but also can solve the long-existing Cl loss problem. In particular, Cl-doped rhombic dodecahedral Cu2O with (110) exposing facets exhibited 63% PO selectivity with a 12.0 h-1 turnover frequency at 200 °C, outperforming any other coinage metal-based catalysts under mild conditions. Comprehensive characterization and theoretical calculations revealed that the Cl-decorated Cu(I) facilitated formation of electrophilic oxygen species, thus boosting the production of propylene oxide. This work provides a general strategy to develop catalysts and explore the promoter effect by creating uniform isolated anion doping to activate a nearby metal center by virtue of well-defined nanocrystals.

Microphotoelectrochemical Surface-Enhanced Raman Spectroscopy: Toward Bridging Hot-Electron Transfer with a Molecular Reaction.

The rational design and applications of plasmon-mediated chemical reactions (PMCRs) are fundamentally determined by an understanding of photon-electron-molecule interactions. However, the current understanding of the PMCR of plasmon-decayed hot electron-mediated reactions remains implicit, since there has not been a single measurement of both hot-electron transfer and molecular transformation following photon excitation. Therefore, we invented a method called microphotoelectrochemical surface-enhanced Raman spectroscopy (µPEC-SERS) that uses an ultramicroelectrode (UME) whose dimensions match those of the focused laser spot. This system can simultaneously record the photocurrent (∼picoamps) of hot-electron transfer with a high signal-to-noise ratio and the SERS spectra of a molecular reaction in the same electrode area. The responses of the photocurrent and SERS spectra to laser illumination can correlate the surface reaction activated by hot electrons with the SERS spectral changes. A typical PMCR of p-aminothiophenol (PATP) on a Ag UME was used to illustrate that the correlation of the photocurrent with the spectral changes is capable of revealing the reaction mechanism in terms of the formation of activated oxygenated species. The laser power-, laser wavelength-, and surface roughness-dependent photocurrents link the formation of activated oxygenated species to the hot-electron transfer. Further comparisons of the photocurrent with the conventional electrochemical current of the oxygen reduction reaction indicate that the activated oxygenated species are oxidative in transforming PATP to p,p'-dimercaptoazobenzene, which is supported by a density functional theory (DFT) calculation. Therefore, µPEC-SERS could be a powerful tool for investigating PMCRs and other systems involving photon-electron-molecule interactions.

Plasmonic Hot Electron-Mediated Hydrodehalogenation Kinetics on Nanostructured Ag Electrodes.

An attractive field of plasmon-mediated chemical reactions (PMCRs) is developing rapidly, but there is still incomplete understanding of how to control the kinetics of such a reaction related to hot carriers. Here, we chose 8-bromoadenine (8BrAd) as a probe molecule of hot electrons to investigate the influence of the electrode potential, laser wavelength, and power on the PMCR kinetics on silver nanoparticle-modified silver electrodes. Plasmonic hot electron-mediated cleavage of the C-Br bond in 8BrAd has been investigated by combining in situ electrochemical surface-enhanced Raman spectroscopy and density functional theory calculations. The experimental and theoretical results reveal that the energy position of plasmon relaxation-generated hot electrons can be modulated conveniently by applied potentials and laser light. This allows the proposal of a mechanism of modulating the matching energy of the hot electron of plasmon relaxation to promote the efficiency of PMCRs in electrochemical interfaces. Our work will be helpful to design surface plasmon resonance photoelectrochemical reactions on metal electrode surfaces of nanostructures with higher efficiency.

Plasmon-Mediated Chemical Reactions on Nanostructures Unveiled by Surface-Enhanced Raman Spectroscopy.

Surface plasmons (SPs) originating from the collective oscillation of conduction electrons in nanostructured metals (Au, Ag, Cu, etc.) can redistribute not only the electromagnetic fields but also the excited carriers (electrons and holes) and heat energy in time and space. Therefore, SPs can engage in a variety of processes, such as molecular spectroscopy and chemical reaction. Recently, plenty of demonstrations have made plasmon-mediated chemical reactions (PMCRs) a very active research field and make it as a promising approach to facilitate light-driven chemical reactions under mild conditions. Concurrently, making use of the same SPs, surface-enhanced Raman spectroscopy (SERS) with a high surface sensitivity and energy resolution becomes a powerful and commonly used technique for the in situ study of PMCRs. Typically, various effects induced by SPs, including the enhanced electromagnetic field, local heating, excited electrons, and excited holes, can mediate chemical reactions. Herein, we use the para-aminothiophenol (PATP) transformation as an example to elaborate how SERS can be used to study the mechanism of PMCR system combined with theoretical calculations. First, we distinguish the chemical transformation of PATP to 4,4'-dimercaptoazobenzene (DMAB) from the chemical enhancement mechanism of SERS through a series of theoretical and in situ SERS studies. Then, we focus on disentangling the photothermal, hot electrons, and "hot holes" effects in the SPs-induced PATP-to-DMAB conversion. Through varying the key reaction parameters, such as the wavelength and intensity of the incident light, using various core-shell plasmonic nanostructures with different charge transfer properties, we extract the key factors that influence the efficiency and mechanism of this reaction. We confidently prove that the transformation of PATP can occur on account of the oxygen activation induced by the hot electrons or because of the action of hot holes in the absence of oxygen and confirm the critical effect of the interface between the plasmonic nanostructure and reactants. The products of these two process are different. Furthermore, we compare the correlation between PMCRs and SERS, discuss different scenario of PMCRs in situ studied by SERS, and provide some suggestions for the SERS investigation on the PMCRs. Finally, we comment on the mechanism studies on how to distinguish the multieffects of SPs and their influence on the PMCRs, as well as on how to power the chemical reaction and regulate the product selectivity in higher efficiencies.

Ultrahigh-Energy-Transfer Efficiency and Efficient Mn2+ Red Emission Realized by Structural Confinement in Ca9LiMn(PO4)7:Eu2+,Tb3+ Phosphor.

Structural confinement on Eu2+-Mn2+ optical centers is an effective strategy to boost Mn2+ red emission. On the basis of the Ca9LiMn(PO4)7 (CLMP) host with a compact Eu2+-Mn2+ distance of ∼3.5 Å, a pure and intense Mn2+ red emission without seeing Eu2+ emission is realized, indicating that an ultrahigh energy transfer (ET) could be induced by a structural confinement effect. It is found that the Mn2+ emission intensity and quantum efficiency could be further improved by a Tb3+ bridging effect, which offers extra energy levels to reduce the energetic mismatch between the excited states of Eu2+ and Mn2+. The optimal sample CLMP:0.02Eu2+,0.90Tb3+ shows a promising performance in terms of high color purity (93.9%), high quantum efficiency (QE = 51.2%), and good thermal stability (70% of the room-temperature value at 373 K). All of the results demonstrate that CLMP:Eu2+,Tb3+ phosphor is a promising red-light-emitting-diode phosphor, and the structural confinement effect should be developed as a general strategy to enhance the ET efficiency for a pure and efficient emission.

Interfacial Construction of Plasmonic Nanostructures for the Utilization of the Plasmon-Excited Electrons and Holes.

Surface plasmons (SPs) are able to promote chemical reactions through the participation of the energetic charge carriers produced following plasmons decay. Using p-aminothiophenol (PATP) as a probe molecule, we used surface-enhanced Raman spectroscopy to follow the progress of its transformation, in situ, to investigate systematically the role of hot electrons and holes. The energetic carrier mediated PATP oxidation was found to occur even in the absence of oxygen, and was greatly influenced by the interface region near the gold surface. The observed reaction, which occurred efficiently on Au@TiO2 nanostructures, did not happen on bare gold nanoparticles (NPs) or core-shell nanostructures when a silicon oxide layer blocked access to the gold. Moreover, the product of the PATP oxidation with oxygen on Au@TiO2 nanostructures differed from what was obtained without oxygen, suggesting that the mechanism through which "hot holes" mediated the oxidation reaction was different from that operating with oxygen activated by hot electrons.

Toward Long-Term Stability: Single-Crystal Alloys of Cesium-Containing Mixed Cation and Mixed Halide Perovskite.

Perovskite solar cells are strong competitors for silicon-based ones, but suffer from poor long-term stability, for which the intrinsic stability of perovskite materials is of primary concern. Herein, we prepared a series of well-defined cesium-containing mixed cation and mixed halide perovskite single-crystal alloys, which enabled systematic investigations on their structural stabilities against light, heat, water, and oxygen. Two potential phase separation processes are evidenced for the alloys as the cesium content increases to 10% and/or bromide to 15%. Eventually, a highly stable new composition, (FAPbI3)0.9(MAPbBr3)0.05(CsPbBr3)0.05, emerges with a carrier lifetime of 16 µs. It remains stable during at least 10 000 h water-oxygen and 1000 h light stability tests, which is very promising for long-term stable devices with high efficiency. The mechanism for the enhanced stability is elucidated through detailed single-crystal structure analysis. Our work provides a single-crystal-based paradigm for stability investigation, leading to the discovery of stable new perovskite materials.

Metabolic profiling analysis upon acylcarnitines in tissues of hepatocellular carcinoma revealed the inhibited carnitine shuttle system caused by the downregulated carnitine palmitoyltransferase 2.

The carnitine shuttle system (CSS) plays a crucial role in the transportation of fatty acyls during fatty acid ß-oxidation for energy supplementation, especially in cases of high energy demand, such as in cancer. In this study, to systematically characterize alterations of the CSS in hepatocellular carcinoma (HCC), acylcarnitine metabolic profiling was carried out on 80 pairs of HCC tissues and adjacent noncancerous tissues (ANTs) by using ultra-performance liquid chromatography coupled to mass spectrometry. Twenty-four acylcarnitines classified into five categories were identified and characterized between HCCs and ANTs. Notably, increased saturated long-chain acylcarnitines (LCACs) and decreased short- and medium-chain acylcarnitines (S/MCACs) were simultaneously observed in HCC samples. Subsequent correlation network and heatmap analysis indicated low correlations between LCACs and S/MCACs. The mRNA and protein expressions of carnitine palmitoyltransferase 2 (CPT2) was significantly downregulated in HCC samples, whereas CPT1A expression was not significantly changed. Correspondingly, the relative levels of S/MCACs were reduced and those of LCACs were increased in BEL-7402/CPT2-knockdown cells compared to negative controls. Both results suggested that decreased shuttling efficiency in HCC might be associated with downregulation of CPT2. In addition, decreases in the mRNA expression of acetyl-CoA acyltransferase 2 were also observed in HCC tissues and BEL-7402/CPT2-knockdown cells, suggesting potential low ß-oxidation efficiency, which was consistent with the increased expression of stearoyl-CoA desaturase 1 in both samples. The systematic strategy applied in our study illustrated decreased shuttling efficiency of the carnitine shuttle system in HCC and can provide biologists with an in-depth understanding of ß-oxidation in HCC.

Structural Elucidation and Total Synthesis of Three 9-Norlignans from Curculigo capitulata.

Capitulactones A-C, three unprecedented 9-norlignans featuring a unique 3,5-dihydrofuro[2,3- d]oxepin-7(2 H)-one scaffold, were isolated from the roots of Curculigo capitulata. Their structures with absolute configurations were unambiguously established by a combination of spectroscopic data, ECD analysis, and total synthesis. Biomimetic total syntheses of three pairs of the corresponding enantiomers were achieved in 9-10 steps with overall yields of 14.8, 12.7, and 10.3%, respectively. Notably, the unique scaffold of the common western hemisphere of the molecules was constructed by using the oxidation-reduction strategy from benzodihydrofuran.

Single-Molecule Measurement of Adsorption Free Energy at the Solid-Liquid Interface.

Adsorption plays a critical role in surface and interface processes. Fractional surface coverage and adsorption free energy are two essential parameters of molecular adsorption. However, although adsorption at the solid-gas interface has been well-studied, and some adsorption models were proposed more than a century ago, challenges remain for the experimental investigation of molecular adsorption at the solid-liquid interface. Herein, we report the statistical and quantitative single-molecule measurement of adsorption at the solid-liquid interface by using the single-molecule break junction technique. The fractional surface coverage was extracted from the analysis of junction formation probability so that the adsorption free energy could be calculated by referring to the Langmuir isotherm. In the case of three prototypical molecules with terminal methylthio, pyridyl, and amino groups, the adsorption free energies were found to be 32.5, 33.9, and 28.3 kJ mol-1 , respectively, which are consistent with DFT calculations.

Climate change risk perception in global: Correlation with petroleum and liver disease: A meta-analysis.

BACKGROUND: Liver diseases have been bound to environmental factors, inclusive of air pollution. The exposure of workers to petrochemicals counts as a possible cause of Liver diseases, whereas results are inconsistent with the previous studies. In this study, a meta-analysis is conducted to assess the pooled risk. METHODS AND FINDING: A systematic search was performed by related researchers. Correlations are analyzed among petroleum and liver cirrhosis mortality, fatty liver, alanine amino transferase (abbreviated as ALT), aspartate amino transferase (abbreviated as AST). Pooled risk ratios (RR) with 95% confidence interval (CI) and effect size(ES) with 95% confidence interval are calculated. Sensitivity analysis and publication bias are also tested. Data are analyzed from 5 studies involving 296 participants. Results are incorporated through adopting a random effects meta-analysis. Working in a petrochemical plant shall not increase the death risk posed by cirrhosis (RR = 0.44, 95% CI [0.36; 0.54]). Yet the incidence of fatty liver increases (RR = 1.22, 95% CI [1.21; 1.23]). Abnormal incidence of ALT and AST also increases. CONCLUSIONS: Occupational exposure plays an important role in causing ALT abnormalities and fatty liver among oil workers, but not a risk factor of cirrhosis, AST abnormalities and liver cancer.