RESUMO
Owing to outstanding optoelectronic properties, lead halide perovskite nanocrystals (PNCs) are considered promising emitters for next-generation displays. However, the development of pure blue (460-470 nm) perovskite nanocrystal light-emitting diodes (PNC-LEDs), which correspond to the requirements of Rec. 2020 standard, lag far behind that of their green and red counterparts. Here, pure blue CsPb(Br/Cl)3 nanocrystals with remarkable optical performance are demonstrated by a facile fluorine passivation strategy. Prominently, the fluorine passivation on halide vacancies and strong bonding of Pb-F intensely enhance crystal structure stability and inhibit "particle talking" behaviors under both thermal and electrical conditions. Fluorine-based PNCs with high resistance of luminescence thermal quenching retain 70% of photoluminescent intensity when heated to 343 K, which can be attributed to the elevated activation energy for carrier trapping and unchanged grain size. Fluorine-based PNC-LEDs also exhibit stable pure blue electroluminescence (EL) emission with sevenfold promoted luminance and external quantum efficiencies (EQEs), where the suppression of ion migration is further evidenced by a lateral structure device with applied polarizing potential.
RESUMO
Sn-based perovskites are the most promising alternative materials for Pb-based perovskites to address the toxicity problem of lead. However, the development of SnII -based perovskites has been hindered by their extreme instability. Here, we synthesized efficient and stable lead-free Cs4 SnBr6 perovskite by using SnF2 as tin source instead of easily oxidized SnBr2 . The SnF2 configures a fluorine-rich environment, which can not only suppress the oxidation of Sn2+ in the synthesis, but also construct chemically stable Sn-F coordination to hinder the electron transfer from Sn2+ to oxygen within the long-term operation process. The SnF2 -derived Cs4 SnBr6 perovskite shows a high photoluminescence quantum yield of 62.8 %, and excellent stability against oxygen, moisture, and light radiation for 1200â h, representing one of the most stable lead-free perovskites. The results pave a new pathway to enhance the optical properties and stability of lead-free perovskite for high-performance light emitters.
RESUMO
Perovskite nanocrystals have attracted much attention due to their unique optical and electronic properties. Much progress has also been made in the development of light-emitting diodes based on perovskite nanocrystals in the past years. However, compared with the widely reported opaque perovskite nanocrystal light-emitting diodes, semitransparent perovskite nanocrystal light-emitting diodes are rarely studied, which affects the potential application of perovskite nanocrystals in the translucent display field in the future. Here, poly[(9,9-bis(3'-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)] (PFN), a conjugated polymer, was used as an electron transport layer to fabricate the inverted opaque and semitransparent perovskite light-emitting diodes. The maximum external quantum efficiency and luminance were improved from 0.13% and 1041 cd m-2 to 2.07% and 12 540 cd m-2, respectively, through device optimization in opaque light-emitting diodes. The corresponding semitransparent device also demonstrated high transmittance (average 61% from 380 to 780 nm) and high brightness of 1619 and 1643 cd m-2 for the bottom and top sides, respectively.
RESUMO
Lead halide perovskite nanocrystals as promising ultrapure emitters are outstanding candidates for next-generation light-emitting diodes (LEDs) and display applications, but the thermal quenching behavior of light emission has severely hampered their real-world applications. Here, we report an anion passivation strategy to suppress the emission thermal quenching behavior of CsPbBr3 perovskite nanocrystals. By treating with specific anions (such as SO4 2-, OH-, and F- ions), the corresponding wide-bandgap passivation layers, PbSO4, Pb(OH)2, and PbF2, were obtained. They not only repair the surface defects of CsPbBr3 nanocrystals but also stabilize the phase structure of the inner CsPbBr3 core by constructing a core-shell like structure. The photoluminescence thermal resistance experiments show that the treated sample could preserve 79% of its original emission intensity up to 373 K, far superior to that (17%) of pristine CsPbBr3. Based on the thermally stable CsPbBr3 nanocrystals, we achieved temperature-stable white LED devices with a stable electroluminescence spectrum, color gamut and color coordinates in thermal stress tests (up to 373 K).
RESUMO
Plentiful research of InP semiconductor quantum dots (QDs) has been launched over the past few decades for their excellent photoluminescence properties and environmentally friendly characteristics in various applications. However, InP QDs show inferior photostability because they are extremely sensitive to the ambient environment. In this study, we propose a novel method to enhance the photostability of InP/ZnSe/ZnS QDs by doping zirconium into the ZnS layer. We certify that Zr can be oxidized to Zr oxides, which can prevent the QDs from suffering oxidation during light irradiation. The InP/ZnSe/ZnS:Zr QDs maintained 78% of the original photoluminescence quantum yields without significant photodegradation under the irradiation of LED light (450 nm, 3.0 W power intensity) for 14 h, while conventional InP/ZnSe/ZnS QDs dramatically decreased to 29%.
RESUMO
Artificial intelligence offers new opportunities for translucent displays. However, achieving translucent light-emitting diodes (LEDs) with high efficiency and high color purity remains a challenge. Here, we propose a strategy of using an alkali metal/inert metal (calcium/silver) bilayer metal electrode as a top electrode and perovskite nanocrystals as an emitter layer in the device structure, which allows us to not only fabricate excellent opaque LEDs but also manufacture highly efficient semitransparent LEDs with high color purity, total brightness (over 7000 cd m-2), total external quantum efficiency (over 12%), and 56% transmittance around 520 nm. This is the highest external quantum efficiency report about semitransparent LED based on perovskite materials or inorganic quantum dots so far, which presents great application potential in the field of translucent display with high color purity and wide color gamut.
RESUMO
OBJECTIVE: To study the value of parotid sialography and intervention in the diagnosis and treatment of chronic pyogenic parotitis. METHODS: Undertake the technique of parotid sialography with 48% Lipiodol ultra-fluide (France) under X-ray upon 78 patients who were given systemic anti-infections and supporting treatments only with non-obvious-results, and classify all the cases into chronic obstructive (21 cases) and nonobstructive parotitis (57 cases) according to the results of sialography through microcatheter, then go on with bacterial culture and drug sensitivity test. Filling treatments were carried out on obstructive parotitis cases through the duct with mixed liquor consisting of 2% lidocanine, 1% methylviolet. In the same way, alpha-chymotrypsin, amikacin, lidocaine was used in nonobstructive cases. RESULTS: The cure rate of chronic obstructive parotitis was 80.95%, the cure rate of chronic nonobstructive parotitis was 87.72%. CONCLUSION: The method of parotid sialography and intervention in the diagnosis and treatment of chronic pyogenic parotitis is an effective way to treat chronic pyogenic parotitis.