RESUMO
Bruton's tyrosine kinase (BTK) plays a crucial role in B-cell receptor and Fc receptor signaling pathways. BTK is also involved in the regulation of Toll-like receptors and chemokine receptors. Given the central role of BTK in immunity, BTK inhibition represents a promising therapeutic approach for the treatment of inflammatory and autoimmune diseases. Great efforts have been made in developing BTK inhibitors for potential clinical applications in inflammatory and autoimmune diseases. This review covers the recent development of BTK inhibitors at preclinical and clinical stages in treating these diseases. Individual examples of three types of inhibitors, namely covalent irreversible inhibitors, covalent reversible inhibitors, and non-covalent reversible inhibitors, are discussed with a focus on their structure, bioactivity and selectivity. Contrary to expectations, reversible BTK inhibitors have not yielded a significant breakthrough so far. The development of covalent, irreversible BTK inhibitors has progressed more rapidly. Many candidates entered different stages of clinical trials; tolebrutinib and evobrutinib are undergoing phase 3 clinical evaluation. Rilzabrutinib, a covalent reversible BTK inhibitor, is now in phase 3 clinical trials and also offers a promising future. An analysis of the protein-inhibitor interactions based on published co-crystal structures provides useful clues for the rational design of safe and effective small-molecule BTK inhibitors.
Assuntos
Tirosina Quinase da Agamaglobulinemia/antagonistas & inibidores , Doenças Autoimunes/tratamento farmacológico , Doenças Autoimunes/enzimologia , Inflamação/tratamento farmacológico , Inflamação/enzimologia , Inibidores de Proteínas Quinases/uso terapêutico , Tirosina Quinase da Agamaglobulinemia/química , Tirosina Quinase da Agamaglobulinemia/metabolismo , Sítios de Ligação , Desenvolvimento de Medicamentos , HumanosRESUMO
In this work, a novel 7-hydroxybenzoxazinone-based fluorescent probe (PBD) for the selective sensing of biothiols is reported. Upon treatment with biothiols, PBD shows a strong fluorescence enhancement (up to 70-fold) and a large Stokes shift (155 nm). Meanwhile, this probe exhibits high resistance to interference from other amino acids and competing species. PBD features good linearity ranges with a low detection limit of 14.5 nM for glutathione (GSH), 17.5 nM for cysteine (Cys), and 80.0 nM for homocysteine (Hcy), respectively. Finally, the potential utility of this probe for biothiol sensing in living HeLa cells is demonstrated.
Assuntos
Benzoxazinas/química , Técnicas Biossensoriais/métodos , Corantes Fluorescentes/química , Cisteína/análise , Glutationa/análise , Células HeLa , Homocisteína/análise , Humanos , Limite de Detecção , Imagem ÓpticaRESUMO
Limited practical capacity and poor cyclability caused by sluggish kinetics and structural instability are essential aspects that constrain the potential application of Li2MnSiO4 cathode materials. Herein, Li2Mn1- xCa xSiO4/C nanoplates are synthesized using a diethylene-glycol-assisted solvothermal method, targeting to circumvent its drawbacks. Compared with the pristine material, the Ca-substituted material exhibits enhanced electrochemical kinetics and improved cycle life performance. In combination with experimental studies and first-principles calculations, we reveal that Ca incorporation enhances electronic conductivity and the Li-ion diffusion coefficient of the Ca-substituted material, and it improves the structural stability by reducing the lattice distortion. It also shrinks the crystal size and alleviates structure collapse to enhance cycling performance. It is demonstrated that Ca can alleviate the two detrimental factors and shed lights on the further searching for suitable dopants.
RESUMO
One standard way of forming monolayers (MLs) of nanoparticles (NPs) is to drop-cast a NP dispersion made using one solvent onto a second, immiscible solvent; after this upper solvent evaporates, the NP ML can be transferred to a solid substrate by liftoff. We show that this previously universal use of only immiscible solvent pairs can be relaxed and close-packed, hexagonally ordered NP monolayers can self-assemble at liquid-air interfaces when some miscible solvent pairs are used instead. We demonstrate this by drop-casting an iron oxide NP dispersion in toluene on a dimethyl sulfoxide (DMSO) liquid substrate. The NPs are energetically stable at the DMSO surface and remain there even with solvent mixing. Excess NPs coagulate and precipitate in the DMSO, and this limits NPs at the surface to approximately 1 ML. The ML domains at the surface nucleate independently, which is in contrast to ML growth at the receding edge of the drying drop, as is common in immiscible solvent pair systems and seen here for the toluene/diethylene glycol immiscible solvent pair system. This new use of miscible solvent pairs can enable the formation of MLs for a wider range of NPs.
RESUMO
3-Nitro-2H-chromenes have recently been identified as a novel class of potent antitumor agents. In view of the favorable effects shown by sulfonylhydrazones and acylhydrazones, we designed and synthesized a series of sulfonylhydrazone- and acylhydrazone-substituted 8-ethoxy-3-nitro-2H-chromene derivatives, and evaluated their cell growth inhibition activities against A549, KG-1, A2780, and K562 cells. All the tested compounds exhibited more potent antiproliferative activity than BENC-511 against KG-1 cells. These compounds displayed IC50 values in the nanomolar range against A2780 cells. Compound 7d showed prominent cytotoxicity against K562 cells with an IC50 of 0.11 µM, which was comparable to that of BENC-511. Compound 7d arrested K562 cells at the G1 phase at high concentrations and induced apoptosis in K562 cells. Furthermore, 7d increased the levels of cleaved caspase-3, decreased the expression of bcl-2 and induced the cleavage of poly(ADP-ribose) polymerase in K562 cells. Thus, this study provides the development of a series of novel compounds as effective antitumor agents with apoptotic death ability.
Assuntos
Antineoplásicos/síntese química , Apoptose/efeitos dos fármacos , Benzopiranos/síntese química , Proliferação de Células/efeitos dos fármacos , Hidrazonas/química , Antineoplásicos/química , Antineoplásicos/farmacologia , Benzopiranos/química , Benzopiranos/farmacologia , Ciclo Celular/efeitos dos fármacos , Linhagem Celular Tumoral , Sobrevivência Celular/efeitos dos fármacos , Citometria de Fluxo , Humanos , Concentração Inibidora 50 , Células K562 , Estrutura MolecularRESUMO
Netrin-4 (NTN4), a secreted protein from the Netrin family, has been recognized for its role in vascular development, endothelial homeostasis and angiogenesis. Vascular endothelial (VE)-cadherin is a specialized adhesion protein located at the intercellular junctions of endothelial cells (ECs), and regulates migration, proliferation and permeability. To date, the relationship between NTN4 and VE-cadherin in ECs remains unclear. In the present study, human umbilical vein ECs (HUVECs) were transfected with NTN4 overexpression plasmid, resulting in NTN4 overexpression. Reverse transcription-quantitative PCR and western blotting were used to determine gene and protein expression. CCK8, wound healing, and Transwell assays were performed to evaluate cell proliferation, migration and permeability. NTN4 overexpression decreased HUVEC viability and migration. In addition, NTN4 overexpression increased the expression of VE-cadherin and decreased the permeability of HUVECs. Subsequent studies showed that NTN4 overexpression increased the NF-κB protein level and decreased IκB-α protein expression in HUVECs. In HUVECs treated with NF-κB inhibitor pyrrolidine dithiocarbamate, the expression of VE-cadherin failed to increase with NTN4 overexpression. Taken together, the results indicated that NTN4 overexpression increased VE-cadherin expression through the activation of the NF-κB signaling pathway in HUVECs. The present findings revealed a novel regulatory mechanism for VE-cadherin expression and suggested a novel avenue for future research on the role of NTN4 in endothelial barrier-related diseases.
RESUMO
We report on the evolution of the thickness-dependent electronic band structure of the two-dimensional layered-dichalcogenide molybdenum disulfide (MoS2). Micrometer-scale angle-resolved photoemission spectroscopy of mechanically exfoliated and chemical-vapor-deposition-grown crystals provides direct evidence for the shifting of the valence band maximum from Γ to K, for the case of MoS2 having more than one layer, to the case of single-layer MoS2, as predicted by density functional theory. This evolution of the electronic structure from bulk to few-layer to monolayer MoS2 had earlier been predicted to arise from quantum confinement. Furthermore, one of the consequences of this progression in the electronic structure is the dramatic increase in the hole effective mass, in going from bulk to monolayer MoS2 at its Brillouin zone center, which is known as the cause for the decreased carrier mobility of the monolayer form compared to that of bulk MoS2.
RESUMO
In our efforts to develop effective treatment agents for human multiple myeloma (MM), a series of hybrid molecules based on the structures of thalidomide (1) and curcumin (2) were designed, synthesized, and biologically characterized in human multiple myeloma MM1S, RPMI8226, U266 cells, and human lung cancer A549 cells. The biological results showed that two hybrid compounds, 5 and 7, exhibited significantly improved lethal effects towards all three human MM cell models compared to 1 or 2 alone, as well as the combination of 1 and 2. Furthermore, mechanistic studies in U266 cells demonstrated that 5 and 7 can induce the production of reactive oxygen species (ROS) and cause G1/S arrest, thus leading to apoptosis and cell death. Additionally, they exhibited inhibitory effects on NFκB activation in A549 cells. Collectively, the results obtained from these hybrid compounds strongly encourage their further optimization as new leads to develop effective treatment agents for human MM.
Assuntos
Antineoplásicos/farmacologia , Curcumina/farmacologia , Desenho de Fármacos , Mieloma Múltiplo/tratamento farmacológico , Talidomida/farmacologia , Antineoplásicos/síntese química , Antineoplásicos/química , Apoptose/efeitos dos fármacos , Linhagem Celular Tumoral , Proliferação de Células/efeitos dos fármacos , Curcumina/química , Relação Dose-Resposta a Droga , Ensaios de Seleção de Medicamentos Antitumorais , Humanos , Estrutura Molecular , Mieloma Múltiplo/metabolismo , Mieloma Múltiplo/patologia , Espécies Reativas de Oxigênio/metabolismo , Relação Estrutura-Atividade , Talidomida/químicaRESUMO
High-voltage lithium-rich manganese-based layered oxides (LMLOs) are considered as the most competitive cathode materials for next-generation high-energy-density lithium-ion batteries (LIBs). However, LMLOs still suffer from irreversible lattice oxygen release, uncontrollable interface side reactions, and surface structural degradation. Herein, we propose an integration strategy combining La/Al codoping and LixCoPO4 nanocoating to improve the electrochemical performance of LMLOs comprehensively. La/Al codoping regulates the electronic structure to enhance the redox activity of anions and cations and inhibit structural degradation. The LixCoPO4 nanocoating formed by in situ reaction with the surface residual lithium can not only promote Li-ion migration but also reduce interfacial side reactions. The induced Layered@Rocksalt@LixCoPO4 heterostructure suppresses lattice volume variation and structural degradation during cycling. Under the synergistic effect of the heterostructure interface and well-tuned electronic structure, the capacity retention rate of comodified LMLO materials reaches 80.06% after 500 cycles (2.0-4.65 V) and 75.1% after 340 cycles at 1C under a high cut-off voltage of 4.9 V.
RESUMO
The kinetics and intricate interactions governing the growth of 3D single nanoparticle (NP) superlattices (SLs, SNSLs) and binary NP SLs (BNSLs) in solution are understood by combining controlled solvent evaporation and in situ, real-time small-angle X-ray scattering (SAXS). For the iron oxide (magnetite) NP SLs studied here, the larger the NP, the farther apart are the NPs when the SNSLs begin to precipitate and the closer they are after ordering. This is explained by a model of NP assembly using van der Waals interactions between magnetite cores in hydrocarbons with a â¼21 zJ Hamaker constant. When forming BNSLs of two different sized NPs, the NPs that are in excess of that needed to achieve the final BNSL stoichiometry are expelled during the BNSL formation, and these expelled NPs can form SNSLs. The long-range ordering of these SNSLs and the BNSLs can occur faster than the NP expulsion.
Assuntos
Óxido Ferroso-Férrico/química , Nanopartículas/química , Ácido Oleico/química , Coloides/química , Tamanho da Partícula , Espalhamento a Baixo Ângulo , Propriedades de Superfície , Fatores de Tempo , Difração de Raios XRESUMO
A series of novel designed mexiletine derivatives and its analogs were prepared, the structures were confirmed by Nuclear Magnetic Resonance (NMR), Fourier Transform Infrared Spectroscopy (FTIR), and Electrospray Ionization-Mass Spectrometry (ESI-MS), and the enantioseparations were performed on polysaccharide-based chiral stationary phase (CSP), Chiralcel OD-H, and Chiralcel OJ-H, under normal-phase mode. The effects of the concentration of isopropanol in the mobile phase were studied, seven of the eight enantiomers got baseline separation on Chiralcel OD-H, and five of the eight enantiomers got successfully separation on Chiralcel OJ-H. The effects of structural features were also discussed.
Assuntos
Cromatografia Líquida de Alta Pressão/métodos , Mexiletina , 2-Propanol/química , Celulose/análogos & derivados , Celulose/química , Mexiletina/análogos & derivados , Mexiletina/análise , Mexiletina/química , Fenilcarbamatos/química , Polissacarídeos/química , EstereoisomerismoRESUMO
The title compound, C(6)H(5)ClN(2)O(2), crystallizes with two independent mol-ecules in the asymmetric unit. Inter-molecular C-Hâ¯O hydrogen bonds stabilize the crystal structure.
RESUMO
The stretch formability behavior of an AZ61 magnesium alloy plate produced by multi-pass friction stir processing (M-FSP) was investigated, with the applied load vs. displacement curves recorded during Erichsen cupping tests at different punching speeds at room temperature. The stretch formability of M-FSP AZ61 magnesium alloy was significantly enhanced, compared with that of its cast counterpart. The highest Erichsen index of 3.7 mm was obtained at a punching speed of 0.1 mm/min. The improved stretch formability was mainly attributed to the grain refinement stemming from the M-FSP and the presence of extension twinning to accommodate deformation during Erichsen cupping testing.
RESUMO
Developing high-performance solid electrolytes that are operable at room temperature is one of the toughest challenges related to all-solid-state fluoride-ion batteries (FIBs). In this study, tetragonal ß-Pb0.78Sn1.22F4, a promising solid electrolyte material for mild-temperature applications, was modified through annealing under various atmospheres using thin-film models. The annealed samples exhibited preferential growth and enhanced ionic conductivities. The rate-determining factor for electrode/electrolyte interface reactions in all-solid-state FIBs was also investigated by comparing ß-Pb0.78Sn1.22F4 with representative fluoride-ion- and lithium-ion-conductive materials, namely, LaF3, CeF3, and Li7La3Zr2O12. The overall rate constant of the interfacial reaction, k0, which included both mass and charge transfers, was determined using chronoamperometric measurements and Allen-Hickling simulations. Arrhenius-type correlations between k0 and temperature indicated that activation energies calculated from k0 and ionic conductivities (σion) were highly consistent. The results indicated that the mass transfer (electrolyte-side fluoride-ion conduction) should be the rate-determining process at the electrode/electrolyte interface. ß-Pb0.78Sn1.22F4, with a large σion value, had a larger k0 value than Li7La3Zr2O12. Therefore, it is hoped that the development of high-conductivity solid electrolytes can lead to all-solid-state FIBs with superior rate capabilities similar to those of all-solid-state Li-ion batteries.
RESUMO
Chemical vapor deposition (CVD)-grown flakes of high-quality monolayers of WS2 can be stabilized at elevated temperatures by encapsulation with several layer hexagonal boron nitride (h-BN), but to different degrees in the presence of ambient air, flowing N2, and flowing forming gas (95% N2, 5% H2). The best passivation of WS2 at elevated temperature occurs for h-BN-covered samples with flowing N2 (after heating to 873 K), as judged by optical microscopy and photoluminescence (PL) intensity after a heating/cooling cycle. Stability is worse for uncovered samples, but best with flowing forming gas. PL from trions, in addition to that from excitons, is seen for covered WS2 only for forming gas, during cooling below â¼323 K; the trion has an estimated binding energy of â¼28 meV. It might occur because of doping level changes caused by charge defect generation by H2 molecules diffusing between the h-BN and the SiO2/Si substrate. The decomposition of uncovered WS2 flakes in air suggests a dissociation and chemisorption energy barrier of O2 on the WS2 surface of â¼1.6 eV. Fitting the high-temperature PL intensities in air gives a binding energy of a free exciton of â¼229 meV.
RESUMO
A novel class of non-steroidal progesterone receptor antagonists with aromatic beta-amino-ketone scaffold have been synthesized and characterized with high binding affinity and great selectivity for the cognate receptors. Among them, compound 22 was shown to be the most potent progesterone receptor antagonist in cotransfection assay and a murine model of ligand-induced decidualization.
Assuntos
Compostos de Anilina/química , Chalconas/química , Cetonas/química , Receptores de Progesterona/antagonistas & inibidores , Compostos de Anilina/síntese química , Compostos de Anilina/farmacologia , Animais , Sítios de Ligação , Chalconas/síntese química , Chalconas/farmacologia , Simulação por Computador , Cristalografia por Raios X , Humanos , Cetonas/síntese química , Cetonas/farmacologia , Ligantes , Camundongos , Conformação Molecular , Ligação Proteica , Receptores de Progesterona/metabolismo , Estereoisomerismo , Relação Estrutura-AtividadeRESUMO
The pre-mRNA splicing factor SF3B1 shows recurrent mutations among hematologic malignancies and some solid tumors. In 2007, the identification of two cytotoxic natural products, which showed splicing inhibition by binding to SF3b, prompted the development of small-molecule splicing modulators of SF3B1 as therapeutics for cancer. Recent studies suggested that spliceosome-mutant cells are preferentially sensitive to pharmacologic splicing modulation; therefore, exploring the clinical utility of splicing modulator therapies in patients with spliceosome-mutant hematologic malignancies who have failed current therapies is greatly needed, as these patients have few treatment options. H3B-8800 had unique pharmacological activity and exhibited favorable data in phase I clinical trials to treat patients with advanced myeloid malignancies, indicating that further clinical trials are promising. The most established small-molecule modulators of SF3B1 can be categorized into three classes: the bicycles, the monopyranes, and the 12-membered macrolides. This review provides a comprehensive overview of the structure-activity relationships of small-molecule SF3B1 modulators, with a detailed analysis of interactions between modulators and protein binding pocket. The future strategy for splicing modulators development is also discussed.
Assuntos
Antineoplásicos/farmacologia , Neoplasias/tratamento farmacológico , Fosfoproteínas/antagonistas & inibidores , Fatores de Processamento de RNA/antagonistas & inibidores , Bibliotecas de Moléculas Pequenas/farmacologia , Antineoplásicos/química , Humanos , Neoplasias/metabolismo , Fosfoproteínas/metabolismo , Fatores de Processamento de RNA/metabolismo , Bibliotecas de Moléculas Pequenas/química , Relação Estrutura-AtividadeRESUMO
Three D-π-A barbituric acid derivatives with simple structure and intramolecular charge transfer (ICT) mechanisms were synthesized. Molecular dynamics simulations have successfully explained that CB-1 exhibits the best aggregate induced emission (AIE) activity due to the electron-deficient barbituric acid and the electron-rich carbazole exhibit a conformation which similar to π-π stacking, resulting in a strong electrostatic attraction between the molecules, meanwhile the N-atom substituent of the carbazole is n-propane plays a hydrophobic role. At the same time, barbituric acid derivatives also have mechanochromic fluorescent properties. In addition, CB-1 and CB-3 exhibited outstanding fluorescence stability than CB-2 in aggregation state which can be used to detect nitroaromatic explosives in aqueous media. The Stern-Volmer quenching constant (Ksv) of CB-1 and CB-3 is 6.6â¯×â¯104 and 1â¯×â¯105â¯M-1, respectively.
RESUMO
This research mainly focuses on the successful fabrication of nano-hydroxyapatite (nHA) reinforced WE43 alloy by two-pass friction stir processing (FSP). Microstructure evolution, mechanical properties, and in vitro corrosion behavior of FSPed WE43/nHA composite and FSPed WE43 alloy were studied. The results show that nHA particles are effectively dispersed in the processing zone, and the well-dispersed nHA particles can enhance the grain refine effect of FSP. The average grain sizes of FSPed WE43 alloy and WE43/nHA composite are 5.7 and 3.3 µm, respectively. However, a slight deterioration in tensile strength and yield strength is observed on the WE43/nHA composite, compared to the FSPed WE43 alloy, which is attributed to the locally agglomerated nHA particles and the poor quality of interfacial bonding between nHA particles and matrix. The electrochemical test and in vitro immersion test results reveal that the corrosion resistance of the WE43 alloy is greatly improved after FSP. With the addition of nHA particles, the corrosion resistance of the WE43/nHA composite shows an even greater improvement.
RESUMO
In this work, the dissimilar joint of AA7003-T4 and 6060-T4 alloy has been produced by friction stir welding (FSW). The microstructure was examined by optical microscope (OM), electron back scattered diffraction (EBSD), transmission electron microscopy (TEM), and the mechanical properties of the joint were investigated. It is demonstrated that sound dissimilar joint can be produced through FSW. In the nugget; precipitations dissolve into the matrix and η' reprecipitate subsequently; and the elongated aluminum grains are replaced by fine and equiaxed grains due to dynamic recrystallization (DRX). In the heat affected zone (HAZ), coarse ß' and η precipitates are formed and the aluminum grains are coarser as compared to the base materials. In the thermo-mechanical affected zone (TMAZ), equiaxed and elongated grains coexist due to incomplete DRX. The ultimate tensile strength of the dissimilar joint is 159.2 MPa and its elongation is 10.4%. The weak area exists in the HAZ of 6060 alloy, which is placed in the retreating side during FSW. The correlations between the microstucture and mechanical properties of the dissimilar joint are discussed.