RESUMO
For polymer semiconductors, the backbone structure plays an essential role in determining their physicochemical properties and charge transport behaviors. In this work, two donor-acceptor-type polymers (P-BDF and P-NDF) based on benzodifuranone (BDF) and naphthodifunarone (NDF) as electron-deficient moieties and indaceno-dithiophene as electron-rich groups are designed, synthesized and, for the first time, applied in organic field-effect transistor. P-BDF and P-NDF differ from their backbone structures while P-BDF has a more planar backbone conformation due to its smaller conjugated core size and P-NDF features a perpendicular-extended main chain structure. As a result, P-BDF polymer exhibits bathochromic optical absorption, deeper molecular orbital energy levels, and more importantly, closer π-stacking and stronger aggregation in the solid state and thus affords a more promising hole mobility of up to 0.85 cm2 V-1 s-1 in OFET devices, while that of the P-NDF-based devices is only 0.55 cm2 V-1 s-1 . The results suggest the great potential of BDF/NDF-type chromophores in constructing novel organic semiconductors and also indicate that the main chain coplanarity of polymer semiconductors is more essential than the sole extension of π-conjugations (especially at the perpendicular direction of polymer main chains) for the design of high-performance OFET materials.
Assuntos
Polímeros , Transistores Eletrônicos , Conformação Molecular , SemicondutoresRESUMO
AIM: Ambient fine particulate matter (PM2.5) consists of various components, and their respective contributions to the toxicity of PM2.5 remains to be determined. To provide specific recommendations for preventing adverse effects due to PM2.5 pollution, we determined whether the induction of pulmonary inflammation, the putative pathogenesis for the morbidity and mortality due to PM2.5 exposure, was fractioned through solubility-dependent fractioning. METHODS: In the present study, the water and heptane solubilities-dependent serial fractioning of diesel exhaust particulate matter (DEP), a prominent source of urban PM2.5 pollution, was performed. The pro-inflammatory actions of these resultant fractions were then determined using both an intratracheal instillation mouse model and cultured BEAS-2B cells, a human bronchial epithelial cell line. RESULTS: Instillation of the water-insoluble, but not -soluble fraction elicited significant pulmonary inflammatory and acute phase responses, comparable to those induced by instillation of DEP. The water-insoluble fraction was further fractioned using heptane, a polar organic solvent, and instillation of heptane-insoluble, but not -soluble fraction elicited significant pulmonary inflammation and acute phase responses. Furthermore, we showed that DEP and water-insoluble DEP, but not water-soluble DEP, activated pro-inflammatory signaling in cultured BEAS-2B cells, ruling out the possibility that the solubility impacts the in vivo distribution and thus the pulmonary inflammatory response.
Assuntos
Reação de Fase Aguda/induzido quimicamente , Poluentes Atmosféricos/toxicidade , Inflamação/induzido quimicamente , Pulmão/efeitos dos fármacos , Material Particulado/toxicidade , Emissões de Veículos/toxicidade , Reação de Fase Aguda/patologia , Animais , Brônquios/citologia , Linhagem Celular , Células Epiteliais/efeitos dos fármacos , Humanos , Inflamação/patologia , Pulmão/patologia , Masculino , Camundongos Endogâmicos C57BLRESUMO
Colloidal perovskite nanocrystals (PNCs) combine the outstanding optoelectronic properties of bulk perovskites with strong quantum confinement effects at the nanoscale. Their facile and low-cost synthesis, together with superior photoluminescence quantum yields and exceptional optical versatility, make PNCs promising candidates for next-generation optoelectronics. However, this field is still in its early infancy and not yet ready for commercialization due to several open challenges to be addressed, such as toxicity and stability. Here, the key synthesis strategies and the tunable optical properties of PNCs are discussed. The photophysical underpinnings of PNCs, in correlation with recent developments of PNC-based optoelectronic devices, are especially highlighted. The final goal is to outline a theoretical scaffold for the design of high-performance devices that can at the same time address the commercialization challenges of PNC-based technology.
RESUMO
The composting ecosystem is a suitable source for the discovery of novel microorganisms and secondary metabolites. Cellulose degradation is an important part of the global carbon cycle, and ß-glucosidases complete the final step of cellulose hydrolysis by converting cellobiose to glucose. This work analyzes the succession of ß-glucosidase-producing microbial communities that persist throughout cattle manure - rice straw composting, and evaluates their metabolic activities and community advantage during the various phases of composting. Fungal and bacterial ß-glucosidase genes belonging to glycoside hydrolase families 1 and 3 (GH1 and GH3) amplified from DNA were classified and gene abundance levels were analyzed. The major reservoirs of ß-glucosidase genes were the fungal phylum Ascomycota and the bacterial phyla Firmicutes, Actinobacteria, Proteobacteria, and Deinococcus-Thermus. This indicates that a diverse microbial community utilizes cellobiose. The succession of dominant bacteria was also detected during composting. Firmicutes was the dominant bacteria in the thermophilic phase of composting; there was a shift to Actinomycetes in the maturing stage. Proteobacteria accounted for the highest proportions during the heating and thermophilic phases of composting. By contrast, the fungal phylum Ascomycota was a minor microbial community constituent in thermophilic phase of composting. Combined with the analysis of the temperature, cellulose degradation rate and the carboxymethyl cellulase and ß-glucosidase activities showed that the bacterial GH1 family ß-glucosidase genes make greater contribution in cellulose degradation at the later thermophilic stage of composting. In summary, even GH1 bacteria families ß-glucosidase genes showing low abundance in DNA may be functionally important in the later thermophilic phase of composting. The results indicate that a complex community of bacteria and fungi expresses ß-glucosidases in compost. Several ß-glucosidase-producing bacteria and fungi identified in this study may represent potential indicators of composting in cellulose degradation.
Assuntos
Proteínas de Bactérias/metabolismo , Proteínas Fúngicas/metabolismo , Esterco/microbiologia , Microbiota/fisiologia , beta-Glucosidase/genética , Animais , Proteínas de Bactérias/genética , Biodiversidade , Bovinos , Celulose/metabolismo , Compostagem , Proteínas Fúngicas/genética , Oryza/microbiologiaRESUMO
Organic fluorescent materials (OFMs) play a crucial role in the development of biosensors, enabling the extraction of biochemical information within cells and organisms, extending to the human body. Concurrently, OFM biosensors contribute significantly to the progress of modern medical and biological research. However, the practical applications of OFM biosensors face challenges, including issues related to low resolution, dispersivity, and stability. To overcome these challenges, scientists have introduced interactive elements to enhance the order of OFMs. Highly-ordered assembled OFMs represent a novel material type applied to biosensors. In comparison to conventional fluorescent materials, highly-ordered assembled OFMs typically exhibit robust anti-diffusion properties, high imaging contrast, and excellent stability. This approach has emerged as a promising method for effectively tracking bio-signals, particularly in the non-invasive monitoring of chronic diseases. This review introduces several highly-ordered assembled OFMs used in biosensors and also discusses various interactions that are responsible for their assembly, such as hydrogen bonding, π-π interaction, dipole-dipole interaction, and ion electrostatic interaction. Furthermore, it delves into the various applications of these biosensors while addressing the drawbacks that currently limit their commercial application. This review aims to provide a theoretical foundation for designing high-performance, highly-ordered assembled OFM biosensors suitable for practical applications. Additionally, it sheds light on the evolving trends in OFM biosensors and their application fields, offering valuable insights into the future of this dynamic research area.
Assuntos
Técnicas Biossensoriais , Técnicas Biossensoriais/métodosRESUMO
Poly(ethylene oxide) (PEO)-based electrolytes have been extensively studied for all-solid-state lithium-metal batteries due to their excellent film-forming capabilities and low cost. However, the limited ionic conductivity and poor mechanical strength of the PEO-based electrolytes cannot prevent the growth of undesirable lithium dendrites, leading to the failure of batteries. Metal-organic frameworks (MOFs) are functional materials with a periodic porous structure that can improve the electrochemical performance of PEO-based electrolytes. However, the enhancement effect of MOFs with different metal centers and the interaction mechanism with PEO remain unclear. Herein, MOF-74s with Cu or Ni centers are prepared and used as fillers of PEO-based electrolytes. Adding 15 wt % of Cu-MOF-74 to the PEO-based electrolyte (15%Cu-MOF/P-Li) effectively improves the ionic conductivity, lithium transference number, and mechanical strength of the PEO-based electrolyte simultaneously. Furthermore, the ordered pore channels of Cu-MOF-74 provide uniform Li-ion transport pathways, facilitating homogeneous Li+ deposition. As a result, the lithium symmetric cell with 15%Cu-MOF/P-Li shows stable cycles for 1080 h at 0.1 mA cm-2 and 0.1 mAh cm-2, and the Li | 15% Cu-MOF/P-Li | LFP full cell exhibits a long cycle life up to 200 cycles at 60 °C and 0.5 C, with a capacity retention rate of 89.7%.
RESUMO
Recently, extensive research efforts have been made to develop novel π-conjugated materials for use in various electronic applications, such as solar cells, organic semiconductors (OSCs), organic phototransistors (OPTs), organic light-emitting diodes (OLEDs), coatings, etc [...].
RESUMO
The common fluorescent conjugated materials present weak or quenching luminescent phenomena in the solid or aggregate state (ACQ), which limits their applications in medicine and biology. In the last two decades, certain materials, named aggregation-induced emission (AIE) fluorescent materials, have exhibited strong luminescent properties in the aggregate state, which can overcome the ACQ phenomenon. Due to their intrinsic properties, the AIE materials have been successfully used in biolabeling, where they can not only detect the species of ions and their concentrations in organisms, but can also monitor the organisms' physiological activity. In addition, these kinds of materials often present non-biological toxicity. Thus, AIE materials have become some of the most popular biofluorescent probe materials and are attracting more and more attention. This field is still in its early infancy, and several open challenges urgently need to be addressed, such as the materials' biocompatibility, metabolism, and so on. Designing a high-performance AIE material for biofluorescent probes is still challenging. In this review, based on the molecular design concept, various AIE materials with functional groups in the biofluorescent probes are introduced, including tetrastyrene materials, distilbene anthracene materials, triphenylamine materials, and hexaphenylsilole materials. In addition, according to the molecular system design strategy, the donor-acceptor (D-A) system and hydrogen-bonding AIE materials used as biofluorescent probes are reviewed. Finally, the biofluorescent probe design concept and potential evolution trends are discussed. The final goal is to outline a theoretical scaffold for the design of high-performance AIE biofluorescent probes that can at the same time further the development of the applications of AIE-based biofluorescent probes.
Assuntos
Corantes Fluorescentes , Luminescência , ÍonsRESUMO
In the last two decades, organic field-effect transistors (OFETs) have garnered increasing attention from the scientific and industrial communities. The performance of OFETs can be evaluated based on three factors: the charge transport mobility (µ), threshold voltage (Vth), and current on/off ratio (Ion/off). To enhance µ, numerous studies have concentrated on optimizing charge transport within the semiconductor layer. These efforts include: (i) extending π-conjugation, enhancing molecular planarity, and optimizing donor-acceptor structures to improve charge transport within individual molecules; and (ii) promoting strong aggregation, achieving well-ordered structures, and reducing molecular distances to enhance charge transport between molecules. In order to obtain a high charge transport mobility, the charge injection from the electrodes into the semiconductor layer is also important. Since a suitable frontier molecular orbitals' level could align with the work function of the electrodes, in turn forming an Ohmic contact at the interface. OFETs are classified into p-type (hole transport), n-type (electron transport), and ambipolar-type (both hole and electron transport) based on their charge transport characteristics. As of now, the majority of reported conjugated materials are of the p-type semiconductor category, with research on n-type or ambipolar conjugated materials lagging significantly behind. This review introduces the molecular design concept for enhancing charge carrier mobility, addressing both within the semiconductor layer and charge injection aspects. Additionally, the process of designing or converting the semiconductor type is summarized. Lastly, this review discusses potential trends in evolution and challenges and provides an outlook; the ultimate objective is to outline a theoretical framework for designing high-performance organic semiconductors that can advance the development of OFET applications.
RESUMO
Diketopyrrolopyrrole (DPP) and its derivatives, as electron deficient units, are widely used as building blocks in organic field-effect transistors, obtaining high performance. However, further modification of the DPP structure is crucial for the development of organic semiconductors. In this work, an FDPP is synthesized and characterized. The results show that FDPP exhibited not only a good planar core structure with a good conjugation system, but also strong aggregation in the solid state. As a consequence, FDPP presents p-type behavior with a hole mobility of â¼9.7 × 10-3 cm2 V-1 s-1. This study suggests that FDPP is a promising electron deficient unit for high performance semiconductors.
RESUMO
Highly bio-compatible organic semiconductors are widely used as biosensors, but their long-term stability can be compromised due to photo-degradation and structural instability. To address this issue, scientists have developed organic semiconductor nanoparticles (OSNs) by incorporating organic semiconductors into a stable framework or self-assembled structure. OSNs have shown excellent performance and can be used as high-resolution biosensors in modern medical and biological research. They have been used for a wide range of applications, such as detecting small biological molecules, nucleic acids, and enzyme levels, as well as vascular imaging, tumor localization, and more. In particular, OSNs can simulate fine particulate matters (PM2.5, indicating particulate matter with an aerodynamic diameter less than or equal to 2.5 µm) and can be used to study the biodistribution, clearance pathways, and health effects of such particles. However, there are still some problems that need to be solved, such as toxicity, metabolic mechanism, and fluorescence intensity. In this review, based on the structure and design strategies of OSNs, we introduce various types of OSNs-based biosensors with functional groups used as biosensors and discuss their applications in both in vitro and in vivo tracking. Finally, we also discuss the design strategies and potential future trends of OSNs-based biosensors. This review provides a theoretical scaffold for the design of high-performance OSNs-based biosensors and highlights important trends and future directions for their development and application.
Assuntos
Técnicas Biossensoriais , Nanopartículas , Pontos Quânticos , Distribuição Tecidual , Técnicas Biossensoriais/métodos , SemicondutoresRESUMO
In the past few years, people have been committed to a variety of properties and functional materials, among which are nanomaterials, which have been gradually developed in-depth [...].
RESUMO
Flexible electronic devices play a key role in the fields of flexible batteries, electronic skins, and flexible displays, which have attracted more and more attention in the past few years. Among them, the application areas of electronic skin in new energy, artificial intelligence, and other high-tech applications are increasing. Semiconductors are an indispensable part of electronic skin components. The design of semiconductor structure not only needs to maintain good carrier mobility, but also considers extensibility and self-healing capability, which is always a challenging work. Though flexible electronic devices are important for our daily life, the research on this topic is quite rare in the past few years. In this work, the recently published work regarding to stretchable semiconductors as well as self-healing conductors are reviewed. In addition, the current shortcomings, future challenges as well as an outlook of this technology are discussed. The final goal is to outline a theoretical framework for the design of high-performance flexible electronic devices that can at the same time address their commercialization challenges.
RESUMO
A novel alternating donor-acceptor polymer PQ1 is designed and synthesized by palladium-catalyzed Stille coupling between quinoxaline as an electron-deficient unit and indacenodithiophene (IDT) as electron-rich groups. Polymer PQ1 presents not only a strong intramolecular charge transfer effect, which is beneficial for the charge transport within single molecules but also a narrow electrochemical band gap and a high highest occupied molecular orbital (HOMO) energy level. In addition, the optical absorption study indicates that the PQ1 film exhibits good aggregation, which is an advantage for the charge transport between neighboring molecules. As a consequence, PQ1 presents p-type semiconductor properties with a high hole mobility of up to 0.12 cm2 V-1 s-1. This study reveals the great potential of quinoxaline-type chromophores in constructing novel organic semiconductors.
RESUMO
Diketopyrrolopyrrole (DPP), due to its good planarity, π-conjugate structure, thermal stability, and structural modifiability, has received much attention from the scientific community as an excellent semiconductor material for its applications in the field of optoelectronics, such as organic solar cells, organic photovoltaics, and organic field effect transistors. In this study, a new small molecule, pyrrolopyrrole aza-BODIPY (PPAB), based on the thiophene-substituted DPP structure was developed using the Schiff-base formation reaction of DPP and heteroaromatic amines. Absorption spectroscopy, electrochemistry, X-ray diffraction, molecular theoretical simulation calculation were performed, and organic field-effect transistor properties based on PPAB were investigated. It was found that PPAB exhibits a broad absorption range in the visible and near-infrared regions, which is attributed to its long-range conjugate structure. In addition, it is worth noting that PPAB has multiple F atoms resulting in the low LUMO level, which is conducive to the injection and transportation of charge carriers between the semiconductor layer and the electrode. Meanwhile, its hole carrier mobility is up to 1.3 × 10-3 cm2 V-1 s-1 due to its large conjugate structure, good intramolecular charge transfer effect, and high degree of coplanarity. In this study, a new chromophore with electron-deficient ability for designing high-performance semiconductors was successfully synthesized.
RESUMO
For polymer semiconductors, the packing ability and molecular weight of polymers play a very critical role in their optoelectronic properties and carrier transport properties. In this work, two polymers, named linear and branch, are designed and synthesized with donor-acceptor (D-A) structure, based on diketopyrrolopyrrole as an electron acceptor and carbazole as an electron donor, and applied these two polymers in organic field-effect transistors. Linear and branch have similar conjugated backbones but different molecular weights and alkyl chains. The effects of molecular weight and molecular aggregation ability on the carrier transfer efficiency are investigated. As a result, linear exhibits better aggregation ability, but due to its smaller molecular weight than branch molecule, the hole transfer efficiency of linear (1.1 × 10-2 cm2 V -1 s-1) is slightly lower than that of branch (2.3 × 10-2 cm2 V -1 s-1). This work proves that molecular weight is more important than molecular aggregation ability when designing organic field-effect transistors for polymer semiconductors.
RESUMO
Room temperature phosphorescent (RTP) polymers have advantages of strength, toughness, and processing and application flexibility over organic small molecular crystals, but the current RTP polymers are all from rigid plastics and involve chemical linkage and hydrogen and ionic bonds, and thermoplastic RTP elastomer has not been attempted and realized. Moreover, solution-processed films by simply mixing polymers and organic RTP materials can only show weak and single blue RTP. Here it is presented that such elastomer films, once thermomechanically plasticized, can emit bright and long-lived dual RTP. Moreover, they exhibit photo-activation memory effect, variable RTP colors and dynamic deformation RTP response. These results reveal that thermoplasticizing has altered the dispersion states and micro-environment of RTP molecules in matrix, and the cohesion of elastic polymer itself can also greatly restrict non-radiative relaxations to boost both blue mono-molecular and yellow micro-crystalline RTP. This work provides an effective and versatile processing strategy for tuning and enhancing the RTP properties of doped RTP polymers.
RESUMO
In recent years, the wide application of fluoride materials has grown rapidly, therefore excessive discharge in the surrounding environment, especially in drinking water and organic effluent, has become a potential hazard to humans, and has even resulted in fluorosis disease. The development of a highly effective and convenient method to recognize fluoride anions in surrounding environments seems necessary and urgent. Among which, the development of a colorimetric and fluorescence fluoride chemosensor with obvious color changing allowing for naked-eye detection with high sensitivity and selectivity is more interesting and challenging. In this minireview, current novel colorimetric and fluorescence chemosensors for fluoride anions by hydrogen-bond interaction are introduced, including obvious color changing by naked-eye detection, high sensitivity and selectivity, non-pollution and fluoride extraction ability, aqueous detection, and other additional functions. Finally, the perspective of the fluoride chemosensor design concept and potential evolution trends are pointed out.
RESUMO
Trace guest doping systems often show better room temperature phosphorescence (RTP), but trace guest doping role and mechanism are not recognized well. Here we cocrystallize commercial (CCZ) and self-made (LCZ) carbazole derivatives and verify that 0.2 isomer doping can afford the deserved crystal RTP, but further increasing the isomer amount hardly improves RTP. Isomer doping does not affect crystal stacking modes and intermolecular interactions and is inefficient in monomolecular and amorphous states. LCZ derivatives are intrinsically phosphorescent, but crystallization itself cannot effectively inhibit thermal deactivation, and isomer doping restricts nonradiative relaxation and reduces the energy level of the triplet emissive state via space action at a distance rather than currently described adjacent intermolecular interactions. This work has updated some existing views and represented an important conceptual advance in a fresh understanding of trace guest doping RTP systems.
RESUMO
Cr8O21 can be used as the cathode material in all-solid-state batteries with high energy density due to its high reversible specific capacity and high potential plateau. However, the strong oxidation of Cr8O21 leads to poor compatibility with polymer-based solid electrolytes. Herein, to improve the cycle performance of the battery, Al2O3 atomic layer deposition (ALD) coating is applied on Cr8O21 cathodes to modify the interface between the electrode and the electrolyte. X-ray photoelectron spectroscopy, scanning electron microscope, transmission electron microscope, and Fourier transform infrared spectroscopy, etc., are used to estimate the morphology of the ALD coating and the interface reaction mechanism. The electrochemical properties of the Cr8O21 cathodes are investigated. The results show that the uniform and dense Al2O3 layer not only prevents the polyethylene oxide from oxidization but also enhances the lithium-ion transport. The 12-ALD-cycle-coated electrode with approximately 4 nm Al2O3 layer displays the optimal cycling performance, which delivers a high capacity of 260 mAh g-1 for the 125th cycle at 0.1C with a discharge-specific energy of 630 Wh kg-1.