RESUMO
BACKGROUND: Primary familial brain calcification (PFBC) is a rare inherited neurological disorder characterized by bilateral basal ganglia calcification with a series of motor and nonmotor symptoms. Mutations in the SLC20A2 gene, encoding the PiT2 protein, are the major cause of the disease. Here, we report a Chinese PFBC family carrying a SLC20A2 gene mutation, and the proband presented with purely acute psychiatric symptoms, which has been rarely reported in this disease. CASE PRESENTATION: A 38-year-old woman was hospitalized due to disorganized speech; disordered thought contents; disorganized behaviour; emotional instability and lability; and grandiose words, actions and facial expressions. Brain computerized tomography (CT) revealed calcification in the basal ganglia; cerebellar dentate nuclei; and subcortical, periventricular, and deep white matter regions in she and her family members. Through mutation analysis, a heterozygous truncating mutation, c.1723G > T, p.(Glu575*), was identified in the SLC20A2 gene in this family. Thus, this patient was diagnosed with genetically confirmed PFBC, and she responded well to a low dose of antipsychotic drugs. The penetrance of the disease in this family was only 33%, which was significantly lower than that in most families carrying SLC20A2 gene mutations. CONCLUSIONS: Patients with SLC20A2-related PFBC might present with psychiatric symptoms alone, and the penetrance of the disease may be quite low, which adds to the clinical heterogeneity of the disease.
Assuntos
Doenças dos Gânglios da Base , Encefalopatias , Calcinose , Adulto , Gânglios da Base/metabolismo , Doenças dos Gânglios da Base/complicações , Doenças dos Gânglios da Base/diagnóstico por imagem , Doenças dos Gânglios da Base/genética , Encéfalo , Encefalopatias/complicações , Encefalopatias/diagnóstico por imagem , Encefalopatias/genética , Calcinose/complicações , Calcinose/diagnóstico por imagem , Calcinose/genética , Feminino , Humanos , Mutação/genética , Proteínas Cotransportadoras de Sódio-Fosfato Tipo III/genéticaRESUMO
Material development is essential when studying triboelectric nanogenerators (TENGs). This importance is because the performance of TENGs is highly dependent on the properties of the utilized triboelectric materials. To obtain more specific properties, composites have been developed that combine the features of their components. According to Google Scholar, 55% of published papers related to triboelectric nanogenerators have utilized or mentioned composites. This number is 34.5% if one searches with the keyword nanocomposites instead of composites. The importance of composites is because they can exhibit new dielectric properties, better mechanical strength, enhanced charge affinities, etc. Therefore, the development of new composites has great importance in TENG studies. In this paper, we review the production of nanocomposites, the types of nanocomposites, and their application in TENG studies. This review gives an overview of how nanocomposites boost the performance of TENGs and provides guidance for future studies.
RESUMO
Metal-semiconductor junctions and interfaces have been studied for many years due to their importance in applications such as semiconductor electronics and solar cells. However, semiconductor-metal networks are less studied because there is a lack of effective methods to fabricate such structures. Here, we report a novel Au-ZnO-based metal-semiconductor (M-S)n network in which ZnO nanowires were grown horizontally on gold particles and extended to reach the neighboring particles, forming an (M-S)n network. The (M-S)n network was further used as a gas sensor for sensing ethanol and acetone gases. The results show that the (M-S)n network is sensitive to ethanol (28.1 ppm) and acetone (22.3 ppm) gases and has the capacity to recognize the two gases based on differences in the saturation time. This study provides a method for producing a new type of metal-semiconductor network structure and demonstrates its application in gas sensing.
RESUMO
The key pathological feature of Parkinson's disease (PD) is selective degeneration of the neuromelanin (NM)-pigmented dopaminergic neurons in the substantia nigra (SN). NM, like other risk factors, such as oxidative stress (OS) and α-synuclein (α-syn), is involved in the pathogenesis of PD. But whether or not NM synergizes with α-syn or OS in the pathogenesis of PD remains unexplored. In the present study, we examined the effects of NM on cellular viability, apoptosis and free radical production in α-syn over-expressing human neuroblastoma cell line (SK-N-SH) in the presence or absence of the oxidizer Fenton's Reagent (FR). We showed that NM synergized with FR in suppressing cell viability, and in inducing apoptosis and hydroxyl radical production in all SK-N-SH cell lines. α-Syn over-expressing cells exhibited more pronounced effect, especially the A53T mutation. Our findings suggest that NM synergizes with both OS and α-syn in conferring dopaminergic vulnerability, adding to our understanding of the pathogenesis of PD.
Assuntos
Melaninas/toxicidade , alfa-Sinucleína/toxicidade , Adulto , Idoso , Apoptose/efeitos dos fármacos , Western Blotting , Morte Celular/efeitos dos fármacos , Linhagem Celular Tumoral , Sobrevivência Celular/efeitos dos fármacos , Corantes , Neurônios Dopaminérgicos/efeitos dos fármacos , Neurônios Dopaminérgicos/metabolismo , Feminino , Humanos , Radical Hidroxila/metabolismo , Marcação In Situ das Extremidades Cortadas , Ferro/toxicidade , Peroxidação de Lipídeos/efeitos dos fármacos , Masculino , Pessoa de Meia-Idade , Estresse Oxidativo/efeitos dos fármacos , Fatores de Risco , Sais de Tetrazólio , Tiazóis , Transfecção , alfa-Sinucleína/genética , alfa-Sinucleína/metabolismoRESUMO
Multi-walled carbon nanotubes (MWCNTs) are found to hold promise in wide range of applications due to their well-known unique properties. However, their applications in biomedicine are still limited by the relative cytotoxicity. In this study, we introduce the biocompatible gold nanoparticles (Au NPs) modified on MWCNTs, forming new stable nanocomposites: Au-MWCNTs. Further, we design a strategy to explore their drug delivery applications and anti-tumor effects by combining with daunorubicin (DNR), using human hepatocarcinoma cells (SMMC-7721 cells) as cancer cells model. Our results show better biocompatibility of Au-MWCNTs than that of MWCNTs. Moreover, compared with DNR treatment alone, when cells treated by Au-MWCNTs together with DNR, obviously increased DNR concentrations in SMMC-7721 cells and anticancer functions are found, which indicates that Au-MWCNTs could be well qualified for efficient delivery carrier importing anticancer agents like DNR into target cells. This strategy develops an avenue to lessen the toxic side-effect of delivery carrier and thus as the promising approach in relevant cancer therapy.
Assuntos
Antineoplásicos/farmacocinética , Ouro/química , Nanotubos de Carbono , Carcinoma Hepatocelular/metabolismo , Carcinoma Hepatocelular/patologia , Linhagem Celular Tumoral , Sobrevivência Celular , Técnicas Eletroquímicas , Humanos , Neoplasias Hepáticas/metabolismo , Neoplasias Hepáticas/patologiaRESUMO
Triboelectric nanogenerators (TENGs) that utilize triboelectrification and electrostatic induction to convert mechanical energy to electricity have attracted increasing interest in the last 10 years. As a universal physical phenomenon, triboelectrification can occur between any two surfaces that experience physical contact and separation regardless of the type of material. For this reason, many materials, including both organic and inorganic materials, have been studied in TENGs with different purposes. Although organic polymers are mainly used as triboelectric materials in TENGs, the application of inorganic nanomaterials has also been intensively studied because of their unique dielectric, electric, piezoelectric, and optical properties, which can improve the performance of TENGs. A review of how inorganic nanomaterials are used in TENGs would help researchers gain an overview of the progress in this area. Here, we present a review to summarize how inorganic nanomaterials are utilized in TENGs based on the roles, types, and characteristics of the nanomaterials.
RESUMO
Clay-based nanocomposites have been studied for several decades, mainly focusing on clay-polymer nanocomposites. Here, we report on a simple wet chemical method to synthesize clay-APTES-Au (CAAu) nanocomposites, where 3-aminopropyltriethoxysilane (APTES) acts as the linkage. The silane terminal of APTES formed bonds with the clay surface, while the other -NH(2) terminal bonds to gold nanoparticles. The color of clay changed when these CAAu nanocomposites were formed. By changing the size of the gold nanoparticles, the color of CAAu could be adjusted, simply by changing process parameters. TEM characterization of the synthesized nanocomposites showed an even distribution of gold nanoparticles on the clay surfaces. The nanocomposites were stable in strong acid and high concentration of salt conditions, while strong basic solution like NaOH could slightly influence the status of the gold nanoparticles due to the rupture of the Si-O-Si bonds between APTES and clay. To demonstrate the potential for label free sensing application of CAAu nanocomposites, we made hybrids of clay-APTES-Au-HD-Au (CAAuHAu), where hexamethylene diamine (HD) served as links between CAAu nanocomposites and the gold nanoparticles. The color of the composites changed from red to blue, when the hybrids were formed. Moreover, hemoglobin was loaded on the CAAu nanocomposites, which can potentially be used as a biosensor. These synthesized nanocomposites may combine the catalytic properties of clay and the well-known excellent properties of gold nanoparticles, such as the ability to anchor biological and chemical molecules. Furthermore, the color change of CAAu, when the CAAuHAu hybrids were observed, suggests the applications of these nanocomposites in biochemical and chemical sensing.
RESUMO
Joule heating of bundles of Mo(6)S(3)I(6) nanowires, in real time, was studied using in situ TEM probing. TEM imaging, electron diffraction, and conductivity measurements showed a complete transformation of Mo(6)S(3)I(6) into Mo via thermal decomposition. The resulting Mo nanowires had a conductivity that was 2-3 orders higher than the starting material. The conductivity increased even further, up to 1.8 x 10(6) S m( - 1), when the Mo nanowires went through annealing phases. These results suggest that Joule heating might be a general way to transform or anneal nanowires, pointing to applications such as metal nanowire fabrication, novel memory elements based on material transformation, or in situ improvement of field emitters.
Assuntos
Cristalização/métodos , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Nanotecnologia/métodos , Condutividade Elétrica , Calefação/métodos , Substâncias Macromoleculares/química , Teste de Materiais , Conformação Molecular , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
Multiferroic nanomaterials have attracted great interest due to simultaneous two or more properties such as ferroelectricity, ferromagnetism, and ferroelasticity, which can promise a broad application in multifunctional, low-power consumption, environmentally friendly devices. Bismuth ferrite (BiFeO3, BFO) exhibits both (anti)ferromagnetic and ferroelectric properties at room temperature. Thus, it has played an increasingly important role in multiferroic system. In this review, we systematically discussed the developments of BFO nanomaterials including morphology, structures, properties, and potential applications in multiferroic devices with novel functions. Even the opportunities and challenges were all analyzed and summarized. We hope this review can act as an updating and encourage more researchers to push on the development of BFO nanomaterials in the future.
RESUMO
Triboelectric nanogenerators (TENGs) have attracted increasing attention because of their excellent energy conversion efficiency, the diverse choice of materials, and their broad applications in energy harvesting devices and self-powered sensors. New materials have been explored, including green materials, but their performances have not yet reached the level of that for fluoropolymers. Here, a high-performance, fully green TENG (FG-TENG) using cellulose-based tribolayers is reported. It is shown that the FG-TENG has an output power density of above 300 W m-2 , which is a new record for green-material-based TENGs. The high performance of the FG-TENG is due to the high positive charge density of the regenerated cellulose. The FG-TENG is stable after more than 30 000 cycles of operations in humidity of 30%-84%. This work demonstrates that high-performance TENGs can be made using natural green materials for a broad range of applications.
RESUMO
OBJECTIVES: Animal studies have shown that glutamate receptor ionotropic kainate 2 (GRIK2) gene knockout mice are more impulsive and aggressive. This study aims to verify whether the rs6922753 and rs2227283 polymorphisms of the GRIK2 gene are associated with both aggressive behavior and bipolar mania in the Chinese Han population. METHODS: Polymerase chain reaction (PCR) was applied in the genotype rs6922753 and rs2227283 polymorphisms of the GRIK2 gene in 201 bipolar manic patients with aggressive behaviors, 198 bipolar manic patients without aggressive behaviors, and 132 healthy controls. The Modified Overt Aggression Scale (MOAS) was used to evaluate aggressive behavior in patients with bipolar mania. RESULTS: No correlation was found between aggressive behavior and the rs6922753 polymorphism in the three groups. The A/A genotype and A allele of the rs2227283 polymorphism were found significantly more frequently in patients with aggressive behavior than in healthy controls (p = .004 and p = .013, respectively) and in patients with nonaggressive behavior (p = .002 and p = .018, respectively). The A/A genotype and A allele were associated with an increased risk of aggressive behavior. CONCLUSION: This study suggests that the rs2227283 polymorphism of the GRIK2 gene is related to aggressive behaviors in bipolar manic patients and that the A/A genotype and A allele may increase the risk of the aggressive behavior in bipolar manic patients.
Assuntos
Agressão/fisiologia , Povo Asiático/genética , Transtorno Bipolar/genética , Receptores de Ácido Caínico/genética , Adulto , Agressão/psicologia , Alelos , Transtorno Bipolar/psicologia , Estudos de Casos e Controles , Feminino , Genótipo , Humanos , Masculino , Polimorfismo de Nucleotídeo Único , Receptor de GluK2 CainatoRESUMO
Triboelectric nanogenerators (TENG:s) are used as efficient energy transducers in energy harvesting converting mechanical energy into electrical energy. Wind is an abundant source of mechanical energy but how should a good triboelectric wind harvester be designed? We have built and studied a TENG driven by air flow in a table-top sized wind tunnel. Our TENG constitutes of a plastic film of size 10 cm × 2 cm which is fluttering between two copper electrodes generating enough power to light up a battery of LED:s. We measured the voltage and frequency of fluttering at different wind speeds from zero up to 8 m/s for three electrode distances 6 mm, 10 mm and 14 mm. We found that the frequency increases linearly with the wind speed with a cutoff at some low speed. Power was generated already at 1.6 m/s. We seem to be able to explain the observed frequency dependence on wind speed by assuming excitation of the film into different harmonics in response to von Kármán vortices. We also find that the voltage increase linearly with frequency. We anticipate that TENG:s of this design could be useful both as generators and speed sensors because they work at low air speeds.
RESUMO
The ability to control surface wettability and liquid spreading on textured surfaces is of interest for extensive applications. Soft materials have prominent advantages for producing the smart coatings with multiple functions for strain sensing. Here, we report a simple method to prepare flexible hydrophobic smart coatings using graphene-polymer films. Arrays of individual patterns in the films were created by laser engraving and controlled the contact angle of small drops by pinning the contact lines in a horizontal tensile range of 0-200%. By means of experiments and model, we demonstrate that the ductility of drops is relied on the height-to-spacing ratio of the individual pattern and the intrinsic contact angle. Moreover, the change of drop size was utilized to measure the applied strain and liquid viscosity, enabling a strain sensitivity as high as 1068 µm2/%. The proposed laser-etched stretchable graphene-polymer composite has potential applications in DNA microarrays, biological assays, soft robots, and so on.
RESUMO
Transparent electrodes (TEs) made of metallic nanowires, such as Ag, Au, Cu, and Ni, are attracting increasing attention for several reasons: (1) they can act as a substitute for tin oxide-based TEs such as indium-tin oxide (ITO) and fluorine-doped tin oxide (FTO); (2) various methods exist for fabricating such TEs such as filtration, spraying, and Meyer bar coating; (3) greater compatibility with different substrates can be achieved due to the variety of fabrication methods; and (4) extra functions in addition to serving as electrodes, such as catalytic abilities, can be obtained due to the metals of which the TEs are composed. There are a large number of applications for TEs, ranging from electronics and sensors to biomedical devices. This short review is a summary of recent progress, mainly over the past five years, on silver nanowire-based TEs. The focus of the review is on theory development, mechanical, chemical, and thermal stability as well as optical properties. The many applications of TEs are outside the scope of this review.
RESUMO
The triboelectric effect, charging by contact, is the working principle in a device called a triboelectric nanogenerator. They are used as efficient energy transducers in energy harvesting. In such generators the charging of surfaces at contact is followed by a separation of the surfaces increasing the electrical energy which can subsequently be used. Different materials have different triboelectric potentials leading to charging at contact. The temperature dependence of the charging has just recently been studied: the triboelectric effect is decreasing with temperature for a generator of Al-PTFE-Cu. Here, we suggest a mechanism to explain this effect assuming ion transfer using a two-level Schottky model where the two levels corresponds to the two surfaces. The difference in binding energy for ions on the two surfaces then enters the formula for charging. We fit the triboelectric power density as a function of temperature obtained from a two-level Schottky model to measured data for nanogenerators made of Al-PTFE-Cu found in three references. We obtain an average separation energy corresponding to a temperature of 365 K which is of the right magnitude for physically adsorbed atoms. We anticipate that this model could be used for many types of triboelectric nanogenerators.
RESUMO
Antibacterial agents based on nanoparticles (NPs) have many important applications, e.g., for the textile industry, surface disinfection, wound dressing, water treatment, and food preservation. Because of their prevalent use it is important to understand whether bacteria could develop resistance to such antibacterial NPs similarly to the resistance that bacteria are known to develop to antibiotics. Here, it is reported that Escherichia coli (E. coli) develops adaptive resistance to antibacterial ZnO NPs after several days' exposure to the NPs. But, in contrast to antibiotics-resistance, the observed resistance to ZnO NPs is not stable-after several days without exposure to the NPs, the bacteria regain their sensitivity to the NPs' antibacterial properties. Based on the analyses it is suggested that the observed resistance is caused by changes in the shape of the bacteria and the expressions of membrane proteins. The findings provide insights into the response of bacteria to antibacterial NPs, which is important to elucidate for designing and evaluating the risk of applications based on antibacterial NPs.
RESUMO
MoS2 has been studied intensively during recent years as a semiconducting material in several fields, including optoelectronics, for applications such as solar cells and phototransistors. The photoresponse mechanisms of MoS2 have been discussed but are not fully understood, especially the phenomenon in which the photocurrent slowly increases. Here, we report on a study of the photoresponse flash-light-processed MoS2 films of different thicknesses and areas. The photoresponse of such films under different light intensities and bias voltages was measured, showing significant current changes with a quick response followed by a slow one upon exposure to pulsed light. Our in-depth study suggested that the slow response was due to the photothermal effect that heats the MoS2; this hypothesis was supported by the resistivity change at different temperatures. The results obtained from MoS2 films with various thicknesses indicated that the minority-carrier diffusion length was 1.36 µm. This study explained the mechanism of the slow response of the MoS2 film and determined the effective thickness of MoS2 for a photoresponse to occur. The method used here for fabricating MoS2 films could be used for fabricating optoelectronic devices due to its simplicity.
RESUMO
Although much effort has been extended to the efficient cancer therapies, the drug resistance is still a major obstacle in cancer chemotherapeutic treatments. Almost 90% of the cancer therapy failure is caused by the relative problems. Recently, the application of drug coated polymer nanospheres and nanoparticles to inhibit the related drug resistance has attracted much attention. In this report, we have explored a novel strategy to inhibit the multidrug resistance of the targeted tumor cells by combining the unique properties of tetraheptylammonium capped Fe(3)O(4) magnetic nanoparticles with the drug accumulation of anticancer drug daunorubicin. Our results of confocal fluorescence and atomic force microscopy (AFM) as well as electrochemical studies demonstrate the remarkable synergistic effect of Fe(3)O(4) nanoparticles on drug uptake of daunorubicin in leukemia K562 cells. These observations indicate that the interaction between the magnetic nanoparticles Fe(3)O(4) and biologically active molecules on the membrane of leukemia cell lines may contribute to their beneficial effect on cellular uptake so that the synergistic enhanced effect of magnetic nanoparticles Fe(3)O(4) on drug uptake of drug resistance leukemia K562 cells could be observed upon application of the Fe(3)O(4) nanoparticles.
Assuntos
Antibióticos Antineoplásicos/farmacologia , Daunorrubicina/farmacologia , Resistência a Múltiplos Medicamentos , Resistencia a Medicamentos Antineoplásicos , Compostos Férricos , Leucemia/tratamento farmacológico , Nanopartículas , Antibióticos Antineoplásicos/uso terapêutico , Materiais Revestidos Biocompatíveis , Daunorrubicina/uso terapêutico , Sistemas de Liberação de Medicamentos , Resistência a Múltiplos Medicamentos/efeitos dos fármacos , Resistencia a Medicamentos Antineoplásicos/efeitos dos fármacos , Humanos , Células K562 , Leucemia/patologia , Magnetismo , Compostos de Amônio QuaternárioRESUMO
Fe3O4 nanoparticles are the most commonly used magnetic materials with promising applications in biomedical and biochemical engineering. In this study, a novel application of the tetraheptylammonium capped Fe3O4 nanoparticles in controllable biorecognition process of anticancer drug doxorubicin through combination with external static magnetic field has been demonstrated. Our AFM and electrochemical studies illustrate that the presence of the tetraheptylammonium capped Fe3O4 nanoparticles could promote the binding behavior of doxorubicin to DNA. And the results of the electrochemical contact angle measurements indicate that the controllable biomolecular recognition of doxorubicin could be readily achieved by combining these functionalized Fe3O4 nanoparticles with changing the positions of external magnetic field.
Assuntos
Antibióticos Antineoplásicos/química , Doxorrubicina/química , Compostos Férricos/química , Magnetismo , Nanopartículas Metálicas/química , Nanocompostos/química , Engenharia Biomédica , Carbono/química , DNA/química , Eletroquímica/métodos , Microscopia de Força Atômica , Microscopia Eletrônica de Transmissão , Modelos Químicos , Compostos de Amônio Quaternário/químicaRESUMO
A novel strategy of enhancing the drug uptake by cancer cells through the combination of anticancer drug doxorubicin with cadium sulfide (CdS) nanoparticles has been explored by using confocal fluorescence scanning microscopy as well as electrochemical studies, which demonstrates that CdS nanoparticles can readily conjugate with doxorubicin on the targeted cancer cells and facilitate the uptake of drug molecules in the human leukemia K562 cells. Besides, our observations also indicate that the aggregation of the leukemia cells occured when CdS nanoparticles were introduced into the relative target system together with doxorubicin, suggesting that the specific association of CdS nanoparticles with biologically active molecules on the surface of leukemia K562 cells may change some biorecognition or signal transfer pathway among cancer cells. It is suggested that the competitive binding of CdS nanoparticles with accompanying anticancer drug to the membrane of leukemia K562 cells could efficiently prevent the drug release by the drug resistant leukemia cells and thus inhibit the relative multidrug resistance (MDR) of targeted cancer cells.