Correction: A generalized method for alignment of block copolymer films: solvent vapor annealing with soft shear.

Correction for 'A generalized method for alignment of block copolymer films: solvent vapor annealing with soft shear' by Zhe Qiang et al., Soft Matter, 2014, 10, 6068-6076, https://doi.org/10.1039/C4SM00875H.

Visualization of Aluminum Ions at the Mica Water Interface Links Hydrolysis State-to-Surface Potential and Particle Adhesion.

When hydrolyzable cations such as aluminum interact with solid-water interfaces, macroscopic interfacial properties (e.g., surface charge and potential) and interfacial phenomena (e.g., particle adhesion) become tightly linked with the microscopic details of ion adsorption and speciation. We use in situ atomic force microscopy to directly image individual aluminum ions at a mica-water interface and show how adsorbate populations change with pH and aluminum activity. Complementary streaming potential measurements then allow us to build a triple layer model (TLM) that links surface potentials to adsorbate populations, via equilibrium binding constants. Our model predicts that hydrolyzed species dominate the mica-water interface, even when unhydrolyzed species dominate the solution. Ab initio molecular dynamics (AIMD) simulations confirm that aluminum hydrolysis is strongly promoted at the interface. The TLM indicates that hydrolyzed adsorbates are responsible for surface-potential inversions, and we find strong correlations between hydrolyzed adsorbates and particle-adhesion forces, suggesting that these species mediate adhesion by chemical bridging.

Distinctive Stress-Stiffening Responses of Regenerated Silk Fibroin Protein Polymers under Nanoscale Gap Geometries: Effect of Shear on Silk Fibroin-Based Materials.

Interfacial dynamics, assembly processes, and changes in nanostructures and mechanical properties of Bombyx mori silk fibroin (SF) proteins under varying degrees of nanoconfinement without and with lateral shear are investigated. When only compressive confinement forces were applied, SF proteins adsorbed on the surfaces experienced conformational changes following the Alexander-de Gennes theory of polymer brushes. By contrast, when SF proteins were exposed to a simultaneous nanoconfinement and shear, remarkable changes in interaction forces were observed, displaying the second order phase transitions, which are attributed to the formation of SF micelles and globular superstructural aggregates via hierarchical assembly processes. The resultant nanostructured SF aggregates show several folds greater elastic moduli than those of SF films prepared by drop-casting and compression-only and even degummed SF fibers. Such a striking improvement in mechanical strength is ascribed to a directional organization of ß-sheet nanocrystals, effectively driven by nanoconfinement and shear stress-induced stiffing and ordering mechanisms.

The effect of nanoconfinement on the glass transition temperature of ionic liquids.

This work is concerned with investigating the glass transition behavior of ionic liquids as a function of nanoconfinement. The glass transition temperature was found to increase with a decrease in confinement length, below a critical confinement of 40-50 nm and 80-90 nm for 1-butyl-3-methylimidazolium tetrafluoro-borate and 1-methyl-3-octylimidazolium tetrafluoro-borate between alumina surfaces, respectively.

Nanoporous aerogel as a bacteria repelling hygienic material for healthcare environment.

Healthcare-associated infections (HAIs) caused by pathogenic bacteria are a worldwide problem and responsible for numerous cases of morbidity and mortality. Exogenous cross-contamination is one of the main mechanisms contributing to such infections. This work investigates the potential of hydrophobically modified nanoporous silica aerogel as an antiadhesive hygienic material that can inhibit exogenous bacterial contamination. Nanoporous silica aerogels were synthesized via sol-gel polymerization of tetraethyl orthosilicate and hydrophobized using trimethylsilyl chloride. Bacterial adhesion characteristics were evaluated via dip-inoculation in suspensions of Gram-negative Escherichia coli O157:H7 and Gram-positive Staphylococcus aureus. The attachment of E. coli O157:H7 and S. aureus to hydrophobic nanoporous silica aerogel (HNSA) was found to be significantly lower than that to hydrophilic and hydrophobic nonporous silica materials: 99.91% (E. coli O157:H7) and 99.93% (S. aureus) reduction in comparison to hydrophilic nonporous silica, and 82.95% (E. coli O157:H7) and 84.90% (S. aureus) reduction in comparison to hydrophobic nonporous silica. These results suggest that the use of HNSA as surfaces that come into contact with bacterial pathogens in the healthcare environment can improve bacterial hygiene, and therefore may reduce the rate of HAIs.

Test of Equivalence Principle at 10(-8) Level by a Dual-Species Double-Diffraction Raman Atom Interferometer.

We report an improved test of the weak equivalence principle by using a simultaneous 85Rb-87Rb dual-species atom interferometer. We propose and implement a four-wave double-diffraction Raman transition scheme for the interferometer, and demonstrate its ability in suppressing common-mode phase noise of Raman lasers after their frequencies and intensity ratios are optimized. The statistical uncertainty of the experimental data for Eötvös parameter η is 0.8×10(-8) at 3200 s. With various systematic errors corrected, the final value is η=(2.8±3.0)×10(-8). The major uncertainty is attributed to the Coriolis effect.

A generalized method for alignment of block copolymer films: solvent vapor annealing with soft shear.

One of the key issues associated with the utilization of block copolymer (BCP) thin films in nanoscience and nanotechnology is control of their alignment and orientation over macroscopic dimensions. We have recently reported a method, solvent vapor annealing with soft shear (SVA-SS), for fabricating unidirectional alignment of cylindrical nanostructures. This method is a simple extension of the common SVA process by adhering a flat, crosslinked poly(dimethylsiloxane) (PDMS) pad to the BCP thin film. The impact of processing parameters, including annealing time, solvent removal rate and the physical properties of the PDMS pad, on the quality of alignment quantified by the Herman's orientational factor (S) is systematically examined for a model system of polystyrene-block-polyisoprene-block-polystyrene (SIS). As annealing time increases, the SIS morphology transitions from isotropic rods to highly aligned cylinders. Decreasing the rate of solvent removal, which impacts the shear rate imposed by the contraction of the PDMS, improves the orientation factor of the cylindrical domains; this suggests the nanostructure alignment is primarily induced by contraction of PDMS during solvent removal. Moreover, the physical properties of the PDMS controlled by the crosslink density impact the orientation factor by tuning its swelling extent during SVA-SS and elastic modulus. Decreasing the PDMS crosslink density increases S; this effect appears to be primarily driven by the changes in the solubility of the SVA-SS solvent in the PDMS. With this understanding of the critical processing parameters, SVA-SS has been successfully applied to align a wide variety of BCPs including polystyrene-block-polybutadiene-block-polystyrene (SBS), polystyrene-block-poly(N,N-dimethyl-n-octadecylammonium p-styrenesulfonate) (PS-b-PSS-DMODA), polystyrene-block-polydimethylsiloxane (PS-b-PDMS) and polystyrene-block-poly(2-vinlypyridine) (PS-b-P2VP). These results suggest that SVA-SS is a generalizable method for the alignment of BCP thin films.

Geocolloidal interactions and relaxation dynamics under nanoconfinement: Effects of salinity and particle concentration.

HYPOTHESIS: Energy-related contaminants are frequently associated with geocolloids that translocate in underground fissures with dimensions comparable with geocolloids. To assess the transport and impact of energy-related contaminants in geological systems, fundamental understandings of interfacial behaviors of nanoparticles under confinement is imperative. We hypothesize that the dynamic properties of geocolloids, as well as their dependence on aqueous medium conditions would deviate from bulk behaviors under nanoconfinement. EXPERIMENTS: Force profiles and rheological properties of 50 nm silica nanoparticles in aqueous media confined between mica surfaces as a function of surface separation, particle concentrations, and salinity were measured utilizing the surface forces apparatus. FINDINGS: Force profiles revealed the critical surface separation for nonlinear rheological behaviors coincides with the onset of exponential repulsion between mica surfaces. When salts were absent, the normal forces and viscosity values of colloidal suspensions resembled pure water. In contrast, with salts, the force profiles and corresponding critical length scales were found to be highly sensitive to the particle concentration and the degree of confinement. A Newtonian to shear-thinning transition was captured with increasing degrees of confinement. Our results show that the interplay among confinement, particle, and ionic concentrations can alter the interparticle forces and rheological responses of true nanosized-colloidal suspensions and thus their transport behaviors under nanoconfinement for the first time.

Synthesis, insertion, and characterization of SARS-CoV-2 membrane protein within lipid bilayers.

Throughout history, coronaviruses have posed challenges to both public health and the global economy; nevertheless, methods to combat them remain rudimentary, primarily due to the absence of experiments to understand the function of various viral components. Among these, membrane (M) proteins are one of the most elusive because of their small size and challenges with expression. Here, we report the development of an expression system to produce tens to hundreds of milligrams of M protein per liter of Escherichia coli culture. These large yields render many previously inaccessible structural and biophysical experiments feasible. Using cryo-electron microscopy and atomic force microscopy, we image and characterize individual membrane-incorporated M protein dimers and discover membrane thinning in the vicinity, which we validated with molecular dynamics simulations. Our results suggest that the resulting line tension, along with predicted induction of local membrane curvature, could ultimately drive viral assembly and budding.

Apigenin Protects Mouse Retina against Oxidative Damage by Regulating the Nrf2 Pathway and Autophagy.

Oxidative stress is a critical factor in the pathology of age-related macular degeneration (AMD). Apigenin (AP) is a flavonoid with an outstanding antioxidant activity. We had previously observed that AP protected APRE-19 cells against oxidative injury in vitro. However, AP has poor water and fat solubility, which determines its low oral bioavailability. In this study, we prepared the solid dispersion of apigenin (AP-SD). The solubility and dissolution of AP-SD was significantly better than that of the original drug, so the oral bioavailability in rats was better than that of the original drug. Then, the effects of AP-SD on the retina of a model mouse with dry AMD were assessed by fundus autofluorescence (FAF), optical coherence tomography (OCT), and electron microscopy; the results revealed that AP-SD alleviated retinopathy. Further research found that AP-SD promoted the nuclear translocation of Nrf2 and increased expression levels of the Nrf2 and target genes HO-1 and NQO-1. AP-SD enhanced the activities of SOD and GSH-Px and decreased the levels of ROS and MDA. Furthermore, AP-SD upregulated the expressions of p62 and LC3II in an Nrf2-dependent manner. However, these effects of AP-SD were observed only in the retina of Nrf2 WT mice, not in Nrf2 KO mice. In addition, the therapeutic effect of AP-SD was dose dependent, and AP did not work. In conclusion, AP-SD significantly enhanced the bioavailability of the original drug and reduced retinal oxidative injury in the model mouse of dry AMD in vivo. The results of the underlying mechanism showed that AP-SD upregulated the expression of antioxidant enzymes through the Nrf2 pathway and upregulated autophagy, thus inhibiting retinal oxidative damage. AP-SD may be a potential compound for the treatment of dry AMD.

Dual-functional core-shell electrospun mats with precisely controlled release of anti-inflammatory and anti-bacterial agents.

Acute wounds are worldwide problems affecting millions of people and causing heavy economic burden to national healthcare systems. Herein, we describe novel wound dressing materials relying on core/shell electrospun mats incorporated with flurbiprofen and vancomycin for achieving programmable release of anti-inflammatory and anti-bacterial agents. The shell matrix of nanofibers consisted of polyethylene oxide while the core matrix was made from a blend of silk and collagen. Several optimal mat architectures were engineered with distinct configurations, of which release profiles displayed an exponential trend, which indicates a first-order process following Fickian diffusion behavior. The flurbiprofen release lasted from 2 to 6 days, which was much faster compared to the one of vancomycin prolonged up to about 20 days. Mechanical data indicated tensile modulus, tensile strength, elongation before break of core/shell electrospun mats became enhanced or comparable to those for human skin after methanol vapor treatment. Desirable release kinetics and mechanical characteristics achieved by novel core/shell electrospun mats were attributable to induced enrichment of ß-sheet phase in silk via methanol vapor treatment as well as water annealing process with time and judicious selections for matrix materials and mat configurations. The design principles considered in this study successfully addressed a range of inflammation and infection requirements in wound healing, potentially guiding construction of other biomedical coatings and devices.

Rapid (<3 min) microwave synthesis of block copolymer templated ordered mesoporous metal oxide and carbonate films using nitrate-citric acid systems.

Rapid chemical transformation from micelle templated precursors (metal nitrate and citric acid) to ordered mesoporous metal carbonates and oxides is demonstrated using microwave heating for cobalt, copper, manganese and zinc. Without aging requirements, <3 min of microwave processing yields highly ordered mesoporous films.

Bicontinuous mesoporous carbon thin films via an order-order transition.

Bicontinuous mesoporous carbon films are fabricated by cooperative self-assembly of phenolic resin and amphiphilic triblock copolymer via an order-order transition from cylinders to gyroid. The film morphology is strongly influenced by the details of processing, including age of the resol, resol : template ratio, and the solvent vapor annealing process.

[Effect of ecdysterone on the proliferation of human umbilical cord mesenchymal stem cells in vitro].

OBJECTIVE: To investigate the effect of ecdysterone on the proliferation of human umbilical cord mesenchymal stem cells (hUCMSCs) in vitro. METHODS: hUCMSCs isolated by enzyme digestion from human umbilical cord tissues were cultured and identified for the surface antigens using fluorescence-activated cell sorting (FACS). The cells were treated with ecdysterone at the concentrations of 0, 25, 50, 100, 150, and 200 µg/ml, and the changes in the cell proliferation were detected using MTT assay. RESULTS: The third-passage hUCMSCs were positive for CD29 and CD105 and negative for CD34 and CD45 as shown by flow cytometry. Treatment with ecdysterone resulted in significantly increased cell proliferation as compared to the control cells (P<0.05), but no significant differences were found in cells treated with 100, 150, and 200 µg/ml ecdysterone (P>0.05). The growth curves of the cells also demonstrated the definite effect of ecdysterone in promoting the proliferation of hUCMSCs. CONCLUSION: Ecdysterone can promote the proliferation of hUCMSCs in vitro with the optimal concentration of 100 µg/ml, suggesting its potential value in the enrichment of mesenchymal stem cells.

[Effect of ecdysterone on the proliferation of human mesenchymal stem cells in vitro].

OBJECTIVE: To investigate the effect of ecdysterone (EDS) on the proliferation of human bone marrow mesenchymal stem cells (hMSCs) in vitro. METHODS: hMSCs were isolated from human bone marrow cell suspension by density gradient centrifugation. The expression of integrins CD44, CD105, CD34 and CD29 were examined by immunocytochemical method. EDS at 10, 25, 50 or 100 microg/ml were added in hMSC culture system, using the routine culture medium for hMSCs as control. The cell viability were analyzed by MTT assay and the cell cycle changes were examined by flow cytometry. RESULTS: The optical density (OD) differed significant between the EDS treatment groups and the control group (P<0.01), and 25 microg/ml EDS group showed the highest OD value (P<0.01) without significant differences among 10, 50 and 100 microg/ml EDS groups (P>0.05). Flow cytometry showed that treatment of the cells with 25 microg/ml EDS significantly increased the cell percentages in S and G(2)M phases and the proliferation index (PI) of the cells as compared with the control group. CONCLUSION: Within a given concentration range, EDS can promote the proliferation of hMSCs in vitro, and this effect can be the most obvious at the concentration of 25 microg/ml. The effect of EDS in promoting the proliferation of hMSCs does not positively correlate to EDS concentration administered.