Deciphering the ultra-high plasticity in metal monochalcogenides.

The quest for electronic devices that offer flexibility, wearability, durability and high performance has spotlighted two-dimensional (2D) van der Waals materials as potential next-generation semiconductors. Especially noteworthy is indium selenide, which has demonstrated surprising ultra-high plasticity. To deepen our understanding of this unusual plasticity in 2D van der Waals materials and to explore inorganic plastic semiconductors, we have conducted in-depth experimental and theoretical investigations on metal monochalcogenides (MX) and transition metal dichalcogenides (MX2). We have discovered a general plastic deformation mode in MX, which is facilitated by the synergetic effect of phase transitions, interlayer gliding and micro-cracks. This is in contrast to crystals with strong atomic bonding, such as metals and ceramics, where plasticity is primarily driven by dislocations, twinning or grain boundaries. The enhancement of gliding barriers prevents macroscopic fractures through a pinning effect after changes in stacking order. The discovery of ultra-high plasticity and the phase transition mechanism in 2D MX materials holds significant potential for the design and development of high-performance inorganic plastic semiconductors.

Ferroic Phases in Two-Dimensional Materials.

Two-dimensional (2D) ferroics, namely ferroelectric, ferromagnetic, and ferroelastic materials, are attracting rising interest due to their fascinating physical properties and promising functional applications. A variety of 2D ferroic phases, as well as 2D multiferroics and the novel 2D ferrovalleytronics/ferrotoroidics, have been recently predicted by theory, even down to the single atomic layers. Meanwhile, some of them have already been experimentally verified. In addition to the intrinsic 2D ferroics, appropriate stacking, doping, and defects can also artificially regulate the ferroic phases of 2D materials. Correspondingly, ferroic ordering in 2D materials exhibits enormous potential for future high density memory devices, energy conversion devices, and sensing devices, among other applications. In this paper, the recent research progresses on 2D ferroic phases are comprehensively reviewed, with emphasis on chemistry and structural origin of the ferroic properties. In addition, the promising applications of the 2D ferroics for information storage, optoelectronics, and sensing are also briefly discussed. Finally, we envisioned a few possible pathways for the future 2D ferroics research and development. This comprehensive overview on the 2D ferroic phases can provide an atlas for this field and facilitate further exploration of the intriguing new materials and physical phenomena, which will generate tremendous impact on future functional materials and devices.

XP-524 is a dual-BET/EP300 inhibitor that represses oncogenic KRAS and potentiates immune checkpoint inhibition in pancreatic cancer.

Pancreatic ductal adenocarcinoma (PDAC) is associated with extensive dysregulation of the epigenome and epigenetic regulators, such as bromodomain and extraterminal motif (BET) proteins, have been suggested as potential targets for therapy. However, single-agent BET inhibition has shown poor efficacy in clinical trials, and no epigenetic approaches are currently used in PDAC. To circumvent the limitations of the current generation of BET inhibitors, we developed the compound XP-524 as an inhibitor of the BET protein BRD4 and the histone acetyltransferase EP300/CBP, both of which are ubiquitously expressed in PDAC tissues and cooperate to enhance tumorigenesis. XP-524 showed increased potency and superior tumoricidal activity than the benchmark BET inhibitor JQ-1 in vitro, with comparable efficacy to higher-dose JQ-1 combined with the EP300/CBP inhibitor SGC-CBP30. We determined that this is in part due to the epigenetic silencing of KRAS in vitro, with similar results observed using ex vivo slice cultures of human PDAC tumors. Accordingly, XP-524 prevented KRAS-induced, neoplastic transformation in vivo and extended survival in two transgenic mouse models of aggressive PDAC. In addition to the inhibition of KRAS/MAPK signaling, XP-524 also enhanced the presentation of self-peptide and tumor recruitment of cytotoxic T lymphocytes, though these lymphocytes remained refractory from full activation. We, therefore, combined XP-524 with an anti-PD-1 antibody in vivo, which reactivated the cytotoxic immune program and extended survival well beyond XP-524 in monotherapy. Pending a comprehensive safety evaluation, these results suggest that XP-524 may benefit PDAC patients and warrant further exploration, particularly in combination with immune checkpoint inhibition.

A High Working Temperature Multiferroic Induced by Inverse Temperature Symmetry Breaking.

Molecular-based multiferroic materials that possess ferroelectric and ferroelastic orders simultaneously have attracted tremendous attention for their potential applications in multiple-state memory devices, molecular switches, and information storage systems. However, it is still a great challenge to effectively construct novel molecular-based multiferroic materials with multifunctionalities. Generally, the structure of these materials possess high symmetry at high temperatures, while processing an obvious order-disorder or displacement-type ferroelastic or ferroelectric phase transition triggered by symmetry breaking during the cooling processes. Therefore, these materials can only function below the Curie temperature (Tc), the low of which is a severe impediment to their practical application. Despite great efforts to elevate Tc, designing single-phase crystalline materials that exhibit multiferroic orders above room temperature remains a challenge. Here, an inverse temperature symmetry-breaking phenomenon was achieved in [FPM][Fe3(µ3-O)(µ-O2CH)8] (FPM stands for 3-(3-formylamino-propyl)-3,4,5,6-tetrahydropyrimidin-1-ium, which acts as the counterions and the rotor component in the network), enabling a ferroelastoelectric phase at a temperature higher than Tc (365 K). Upon heating from room temperature, two-step distinct symmetry breaking with the mm2Fm species leads to the coexistence of ferroelasticity and ferroelectricity in the temperature interval of 365-426 K. In the first step, the FPM cations undergo a conformational flip-induced inverse temperature symmetry breaking; in the second step, a typical ordered-disordered motion-induced symmetry breaking phase transition can be observed, and the abnormal inverse temperature symmetry breaking is unprecedented. Except for the multistep ferroelectric and ferroelastic switching, this complex also exhibits fascinating nonlinear optical switching properties. These discoveries not only signify an important step in designing novel molecular-based multiferroic materials with high working temperatures, but also inspire their multifunctional applications such as multistep switches.

Pd(II)-Catalyzed ß-C(sp3)-H Alkynylation of Alanine in Di- and Tripeptides with Asn as an Endogenous Directing Group.

The introduction of alkyne moieties into peptides remains in demand as it represents a promising approach for further structural diversification of peptides. Herein, we describe the Pd(II)-catalyzed C(sp3)-H alkynylation of Ala-Asn-embedded di- and tripeptides using Asn as the endogenous lead group. In addition, a key building block for the glycopeptide Tyc4PG-14 and Tyc4PG-15 was produced by our methodology.

Giant Anisotropic Thermal Expansion Phase Transition of Silver Iodide Anionic Organic-Inorganic Hybrid.

Hybrid metal halide materials with charming phase transition behaviors have attracted considerable attention. In former works, much attention has been focused on the phase transition triggered by the order-disorder or displacement motions of the organic component. However, manipulating the variation of the inorganic component to achieve the phase transition has rarely been reported. Herein, two novel organic-inorganic hybrid materials, [THPM]n[AgX2]n (THPM = 3,4,5,6-tetrahydropyrimidin-1-ium, X = I for 1 and Br for 2) with the [AgX2]nn- anionic chain structure, were synthesized. At 293 K, the [AgX2]nn- chains in 1 were constructed by the tetramer units of Ag atoms, while that in 2 was assembled by the dimer structure. Upon heating to 355 K, owing to the variation of the metallophilic interaction between adjacent Ag atoms, a unique transformation process from tetramer to dimer in [AgI2]nn- chains of 1 can be detected and endow 1 with a giant anisotropic thermal expansion with linear strain of ∼7% and shear strain of ∼20%, which can be used as a mechanical actuator for switching. Alternatively, for 2, no phase transition process can be observed upon the temperature variation. This work provides an effective approach to design phase transition materials triggered by the inorganic part.

Metal Doped Unconventional Phase IrNi Nanobranches: Tunable Electrochemical Nitrate Reduction Performance and Pollutants Upcycling.

Electrochemical nitrate reduction (NO3RR) provides a new option to abate nitrate contamination with a low carbon footprint. Restricted by competitive hydrogen evolution, achieving satisfied nitrate reduction performance in neutral media is still a challenge, especially for the regulation of this multielectron multiproton reaction. Herein, facile element doping is adopted to tune the catalytic behavior of IrNi alloy nanobranches with an unconventional hexagonal close-packed (hcp) phase toward NO3RR. In particular, the obtained hcp IrNiCu nanobranches favor the ammonia production and suppress byproduct formation in a neutral electrolyte indicated by in situ differential electrochemical mass spectrometry, with a high Faradaic efficiency (FE) of 85.6% and a large yield rate of 1253 µg cm-2 h-1 at -0.4 and -0.6 V (vs reversible hydrogen electrode (RHE)), respectively. In contrast, the resultant hcp IrNiCo nanobranches promote the formation of nitrite, with a peak FE of 33.1% at -0.1 V (vs RHE). Furthermore, a hybrid electrolysis cell consisting of NO3RR and formaldehyde oxidation is constructed, which are both catalyzed by hcp IrNiCu nanobranches. This electrolyzer exhibits lower overpotential and holds the potential to treat polluted air and wastewater simultaneously, shedding light on green chemical production based on contaminate degradation.

Factors Influencing Mandibular Deviation: A Retrospective Clinical Study.

This study aimed to investigate the correlation between mandibular deviation (MD) and possible clinical factors in patients with anterior disc displacement (ADD). This retrospective clinical study enrolled 296 patients with ADD, diagnosed using magnetic resonance imaging, from 2015 to 2018. The clinical symptoms and medical histories of these patients were carefully examined and recorded. Mandibular deviation was the primary outcome variable confirmed by a combination of clinical examination and facial photographs or posteroanterior cephalograms. The primary predictor variable was ADD staging. Secondary predictor variables included condylar height and distance of disc displacement. Other predictor variables were age, sex, disease course, oral parafunctions, depression, and bone mineral density. We used logistic regression to examine the correlation between the MD and all predictor variables. The χ2 test and analysis of variance were used to exclude the correlation between the predictor variables. In this study, the prevalence of MD was 77% among 278 patients with ADD. Bilateral ADD staging significantly contributed to MD on both sides. The odds ratio increased with the deterioration of disc displacement. The present study demonstrated that the ADD staging influences the condylar height and MD, and that articular disk position should be considered while treating MD.

Ultrahigh Lubricity between Two-Dimensional Ice and Two-Dimensional Atomic Layers.

Low temperature and high humidity conditions significantly degrade the performance of solid-state lubricants consisting of van der Waals (vdW) atomic layers, owing to the liquid water layer attached/intercalated to the vdW layers, which greatly enhances the interlayer friction. However, using low temperature in situ atomic force microscopy (AFM) and friction force microscopy (FFM), we unveil the unexpected ultralow friction between two-dimensional (2D) ice, a solid phase of water confined to the 2D space, and the 2D molybdenum disulfides (MoS2). The friction of MoS2 and 2D ice is reduced by more than 30% as compared to bare MoS2 and the rigid surface. The phase transition of liquid water into 2D ice under mechanical compression has also been observed. These new findings can be applied as novel frictionless water/ice transport technology in nanofluidic systems and promising high performance lubricants for operating in low temperature and high humidity environments.

Building Co16-N3-Based UiO-MOF to Expand Design Parameters for MOF Photosensitization.

The construction of secondary building units (SBUs) in versatile metal-organic frameworks (MOFs) represents a promising method for developing multi-functional materials, especially for improving their sensitizing ability. Herein, we developed a dual small molecules auxiliary strategy to construct a high-nuclear transition-metal-based UiO-architecture Co16-MOF-BDC with visible-light-absorbing capacity. Remarkably, the N3 - molecule in hexadecameric cobalt azide SBU offers novel modification sites to precise bonding of strong visible-light-absorbing chromophores via click reaction. The resulting Bodipy@Co16-MOF-BDC exhibits extremely high performance for oxidative coupling benzylamine (~100 % yield) via both energy and electron transfer processes, which is much superior to that of Co16-MOF-BDC (31.5 %) and Carboxyl @Co16-MOF-BDC (37.5 %). Systematic investigations reveal that the advantages of Bodipy@Co16-MOF-BDC in dual light-absorbing channels, robust bonding between Bodipy/Co16 clusters and efficient electron-hole separation can greatly boost photosynthesis. This work provides an ideal molecular platform for synergy between photosensitizing MOFs and chromophores by constructing high-nuclear transition-metal-based SBUs with surface-modifiable small molecules.

miR-335-5p inhibits endochondral ossification by directly targeting SP1 in TMJ OA.

OBJECTIVE: During the development of temporomandibular joint osteoarthritis, endochondral ossification is compromised which leads to condylar degeneration; miR-335-5p in endochondral ossification in osteoarthritic condylar cartilage tissue remains unclear. METHODS: Up-regulated microRNA and its target gene were searched for endochondral ossification in osteoarthritis articular cartilage. The effect of increased or decreased miR-335-5p on endochondral ossification was evaluated by transfecting miR-335-5p mimics or miR-335-5p inhibitor in vitro in chondrocytes C28/I2. Finally, we injected the temporomandibular joint of rats intra-articularly with agomiR-335 in a unilateral anterior crossbite rat model to determine the in vivo regulation of miR-335. RESULTS: After the onset of temporomandibular joint osteoarthritis, miR-335-5p levels were gradually up-regulated, whereas endochondral ossification-related genes were down-regulated in condylar cartilage specimens. Our results showed that miR-335 inhibited endochondral ossification after administration of a miR-335 antagonist into the temporomandibular joint articular cavity of a unilateral anterior crossbite rat model. AgomiR-335, a miR-335 agonist, inhibited matrix mineralization in fibrocartilage stem cells in vitro and then miR-335-5p negatively regulated chondrocyte activity by directly targeting SP1 via promoting transforming growth factor-ß/Smad signalling. CONCLUSION: miR-335-5p can significantly inhibit endochondral ossification; therefore, its inhibition may be beneficial for the treatment of temporomandibular joint osteoarthritis.

Direct Visualization of Atomic Structure in Multivariate Metal-Organic Frameworks (MOFs) for Guiding Electrocatalysts Design.

The direct utilization of metal-organic frameworks (MOFs) for electrocatalytic oxygen evolution reaction (OER) has attracted increasing interests. Herein, we employ the low-dose integrated differential phase contrast-scanning transmission electron microscopy (iDPC-STEM) technique to visualize the atomic structure of multivariate MOFs (MTV-MOFs) for guiding the structural design of bulk MOFs for efficient OER. The iDPC-STEM images revealed that incorporating Fe3+ or 2-aminoterephthalate (ATA) into Ni-BDC (BDC: benzenedicarboxylate) can introduce inhomogeneous lattice strain that weaken the coordination bonds, which can be selectively cleaved via a mild heat treatment to simultaneously generate coordinatively unsaturated metal sites, conductive Ni@C and hierarchical porous structure. Thus, excellent OER activity with current densities of 10 and 100 mA cm-2 are achieved over the defective MOFs at small overpotentials of 286 mV and 365 mV, respectively, which is superior to the commercial RuO2 catalyst and most of the bulk MOFs.

Functional Grain Boundaries in Two-Dimensional Transition-Metal Dichalcogenides.

ConspectusTwo-dimensional (2D) transition-metal dichalcogenides (TMDs) are a class of promising low-dimensional materials with a variety of emergent properties which are attractive for next-generation electronic and optical devices; such properties include tunable band gaps, high electron mobilities, high exciton binding energies, excellent thermal stability and flexibility. During the synthesis process of these materials, especially chemical vapor deposition, defects such as grain boundaries (GBs) inevitably exist. GBs are the interfaces between differently oriented grains and are line defects in 2D crystals. While GBs can degrade the overall quality of 2D materials and adversely affect some of their electrical and mechanical properties, recent results show that GBs give rise to or enhance a wide range of unique electrical, mechanical, and chemical properties of the GBs in 2D TMDs. The effects of GBs on 2D material properties are complex and diverse, providing exciting opportunities to realize new functionalities by manipulating the local structure and properties. Notably, these effects are strongly related to atom types, dislocation cores, crystal misorientation at GBs, and both in- and out-of-plane deformation. The exploitation of GBs for novel applications requires a deepened understanding of synthesis, postprocessing, defect structures, GB properties, and GB structure-property relationships in 2D materials.In this Account, we first introduce a detailed classification of GBs in 2D TMDs based on atomic structure, symmetry, and the local coordination of both transition metals and chalcogenide atoms. The GB types in typical MoS2 (high-symmetry hexagonal structure) and ReS2 (low-symmetry monoclinic structure) are taken as examples. Next, we describe the properties of GBs in 2D TMDs, including thermodynamic and kinetic, mechanical, thermal, electrical, magnetic, chemical, and electrocatalysis properties as well as several application areas where these may be exploited. Here we provide systematic atomic-level and electronic level explanations of these properties to clarify their dependences on GB structures. Applications that extend from these properties, including functional electronics, chemical sensors, and electrocatalysts, are also described. Finally, we provide several perspectives and suggest promising opportunities for exploiting the novel properties of GBs in 2D TMDs. We expect that this Account will further stimulate the fundamental research of GBs and boost the wide application of multifunctional devices.

Dielectric and Magnetic Relaxations Exhibited in a 2D Parallel Interpenetrating Frustrated Star Net.

Constructing multiple functional geometric frustration magnets is a hot topic in solid state chemistry and material science. Herein, a two-dimensional (2D) parallel interpenetrating "star" net complex [HDMPDA][Fe6 (µ3 -O)2 (µ-O2 CH)15 ] (1) was obtained successfully with HDMPDA (DMPDA=N, N'-dimethyl-1,3-propanediamine) as charge balancer. The dipole reorientation of the rotator [HDMPDA]+ in the complex brings a structure transition which leads dielectric relaxation close to room temperature. Despite strong antiferromagnetic coupling existing between ions in the net, long-range order temperature TN of the complex is suppressed to 4.2 K by geometric frustration. Interestingly, below TN , a canted antiferromagnetic state, accompanied with slow magnetic relaxation, is detected due to the lack of enough magnetic coupling between 2D layers. Thus, 1 is a particular multifunctional magnetic frustration material containing two different types of relaxations.

Single Crystal to Single Crystal Transformation of CuII Complexes Induced by Dehydrating and Hydrating of Ligands with Chroma Rewritable Behaviors.

In this work, the single crystal to single crystal (SCSC) transformations in three mononuclear copper complexes [CuL22]Cl2·2H2O (1), [CuL12Cl2] (2), and [CuL22]Cl2·4H2O (3) (L1 = di-2-pyridyl ketone, L2 = di(pyridin-2-yl)methanediol) are realized by the irreversible dehydration and hydration reaction of L1 and L2. Dark purple crystal 1 is obtained by self-assembly of L1 and CuCl2·2H2O in solvothermal reactions, in which the carbonyl group of L1 undergoes a hydration addition reaction to form L2. On heating, 1 transforms to 2 by dehydrating water accompanied by the change of the color and coordination octahedron of CuII ions. In a saturated water vapor environment, 2 can absorb six water molecules and transform to 3 with the same color and coordination environment with 1 but different lattice water. The SCSC process from 2 to 3 is reversible: 3 can transform back to 2 on heating like that of 1. Chroma rewritable behaviors in the structural transformation of the complexes make them visually identifiable temperature or water probes.

[Ba4Cl] Cations Directed Perovskite-like Polar Metal Formate Frameworks {[Ba4Cl][M3(HCO2)13]}n (M = Mn, Co, and Mg): Microwave-Assisted Synthesis, Structures, and Properties.

Novel 3D metal formate frameworks {[Ba4Cl][M3(HCO2)13]}n (M = Mn for 1, Co for 2, and Mg for 3) were successfully assembled via microwave-assisted synthesis. The complexes are rare coordination polymers crystallized at space group P4cc with the polar point group C4v. In the structure, the MII ions are bridged by two types of anti-anti formate in forming a 3D pcu framework, and additional formates coordinate to the unsaturated sites of the MII ions in the framework, giving an anionic M-formate net. Ba4Cl clusters take the cavities of the net as charge balance, in which the chloride ion deviates from the center of the barium ions. The asymmetric Ba4Cl structure is transmitted throughout the crystal resulting in polar structure, which is further confirmed by nonlinear optical and piezoelectric test. Nonlinear optical activity tests of 1 and 3 show SHG signals 0.32 and 0.28 times that of KDP, while 2 has a piezoelectric coefficient d33 of 6.8 pC/N along polar axis. Magnetic studies reveal antiferromagnetic coupling between MII ions in 1 and 2. Spin canting was found only in 2 with anisotropic CoII ions, and 2 is a canted antiferromagnetically with TN = 5 K. Further field-induced spin flop was also found in 2 with a critical field 0.9 T.

Dicarboxylate Modulating Molecular-Ionic Platinum Compounds with Variable Stacking and Photoluminescence.

Under solvothermal conditions, 10 molecular-ionic platinum compounds [Pt(NIA)2]·(L)·nH2O (L = dicarboxylate) were synthesized. In the reaction, acetonitrile undergoes trimerization in situ to generate N-(1-iminoethyl)acetamidine (NIA), which coordinates to PtII ions in forming the N-(1-iminoethyl)acetamidine platinum cation, while the organic carboxylates act as anions. Structural analysis shows that carboxylate ligands regulate the mode of packing of [Pt(NIA)2] in those compounds. Photoluminescence studies show that the photoluminescence behaviors of those compounds also depended on the carboxylate ligands. 1-4, 6, and 7 show blue light emission with fluorescence emission wavelengths of 437-440 nm despite the different carboxylate ligands used. 5 and 8 show green emissions with maximum intensity peak positions of 522 nm. Compared with that of 5 and 8, the emission of 9 and 10 has the same red shifts with peak positions of 567 and 528 nm. The variable-temperature photoluminescence studies reveal that 8 and 10 show two different thermal quenching (TQ) zones in the range of 80-420 K, while the emission intensity of 9 shows negative thermal quenching at low temperatures of 80-220 K and TQ in the range of 220-420 K.

Spontaneously Ordered Hierarchical Two-Dimensional Wrinkle Patterns in Two-Dimensional Materials.

Achieving two-dimensionally (2D) ordered surface wrinkle patterns is still challenging not only for the atomic-thick 2D materials but also in general for all soft surfaces. Normally disordered 2D wrinkle patterns on isotropic surfaces can be rendered via biaxial straining. Here, we report that the 1D and 2D ordered wrinkle patterns in 2D materials can be produced by sequential wrinkling controlled by thermal straining and vertical spatial confinement. The various hierarchical patterns in 2D materials generated by our method are highly periodic, and the hexagonal crystal symmetry is obeyed. More interestingly, these patterns can be maintained in suspended monolayers after delamination from the underlying surfaces which shows the great application potentials. Our new approach can simplify the patterning processes on 2D layered materials and reduce the risk of damage compared to conventional lithography methods, and numerous engineering applications that require nanoscale ordered surface texturing could be empowered.

A General Wet Transferring Approach for Diffusion-Facilitated Space-Confined Grown Perovskite Single-Crystalline Optoelectronic Thin Films.

Hybrid perovskite single-crystalline thin films are promising for making high-performance perovskite optoelectronic devices due to their superior physical properties. However, it is still challenging to incorporate them into multilayer devices because of their on-substrate growth. Here, a wet transfer method is used in transferring perovskite single-crystalline films perfectly onto various target substrates. More importantly, large millimeter-scaled single-crystalline films can be obtained via a diffusion-facilitated space-confined growth method as thin as a few hundred nanometers, which are capable of sustaining excellent crystalline quality and morphology after the transferring process. The availability of these crystalline films offers us a convenient route to further investigate their intrinsic properties of hybrid perovskites. We also demonstrate that the wet transfer method can be used for scalable fabrication of perovskite single-crystalline film-based photodetectors exhibiting a remarkable photoresponsivity. It is expected that this transferring strategy would promise broad applications of perovskite single-crystalline films for more complex perovskite devices.

Catalyzed Kinetic Growth in Two-Dimensional MoS2.

It remains difficult to control the morphology of two-dimensional (2D) materials via direct chemical vapor deposition (CVD) growth. In particular, off-equilibrium (kinetic) growth may produce flakes with non-Wulff shapes (e.g., high-index edges, symmetrical shapes, etc.), which are potentially useful; however, a general controllable approach for the kinetic growth of 2D materials is currently lacking. In this work, we pushed the CVD growth of 2D MoS2 into deep kinetic regime, by using potassium chloride (KCl) as catalyst and plasma pretreatment on growth substrates. The unprecedented nonequilibrium high-index faceting and unusual high-symmetry shapes in 2D materials have been realized. The growth mechanism of high-index facets is rationalized based on the theory of kinetic instability on crystal surfaces. This new vapor-liquid-adatom-solid (VLAS) growth mechanism-synergistic capture of multiple vapor phase molecules by the catalyst particles on corners and the oversaturated adatom diffusion along adjacent edges can offer great opportunities for shape engineering on 2D materials. The high-quality, rapid, and controllable synthesis of high-index facets (edges) and other non-Wulff shapes of 2D transition metal dichalcogenides will benefit the developments in 2D materials.