RESUMO
Single-atom catalysts (SACs) with maximized metal atom utilization and intriguing properties are of utmost importance for energy conversion and catalysis science. However, the lack of a straightforward and scalable synthesis strategy of SACs on diverse support materials remains the bottleneck for their large-scale industrial applications. Herein, we report a general approach to directly transform bulk metals into single atoms through the precise control of the electrodissolution-electrodeposition kinetics in ionic liquids and demonstrate the successful applicability of up to twenty different monometallic SACs and one multimetallic SAC with five distinct elements. As a case study, the atomically dispersed Pt was electrodeposited onto Ni3N/Ni-Co-graphene oxide heterostructures in varied scales (up to 5 cm × 5 cm) as bifunctional catalysts with the electronic metal-support interaction, which exhibits low overpotentials at 10 mA cm-2 for hydrogen evolution reaction (HER, 30 mV) and oxygen evolution reaction (OER, 263 mV) with a relatively low Pt loading (0.98 wt%). This work provides a simple and practical route for large-scale synthesis of various SACs with favorable catalytic properties on diversified supports using alternative ionic liquids and inspires the methodology on precise synthesis of multimetallic single-atom materials with tunable compositions.
RESUMO
Flash Joule heating has emerged as an ultrafast, scalable, and versatile synthesis method for nanomaterials, such as graphene. Here, we experimentally and theoretically deconvolute the contributions of thermal and electrical processes to the synthesis of graphene by flash Joule heating. While traditional methods of graphene synthesis involve purely chemical or thermal driving forces, our results show that the presence of charge and the resulting electric field in a graphene precursor catalyze the formation of graphene. Furthermore, modulation of the current or the pulse width affords the ability to control the three-step phase transition of the material from amorphous carbon to turbostratic graphene and finally to ordered (AB and ABC-stacked) graphene and graphite. Finally, density functional theory simulations reveal that the presence of a charge- and current-induced electric field inside the graphene precursor facilitates phase transition by lowering the activation energy of the reaction. These results demonstrate that the passage of electrical current through a solid sample can directly drive nanocrystal nucleation in flash Joule heating, an insight that may inform future Joule heating or other electrical synthesis strategies.
RESUMO
P2-phase layered cathodes play a pivotal role in sodium-ion batteries due to their efficient Na+ intercalation chemistry. However, limited by crystal disintegration and interfacial instability, bulk and interfacial failure plague their electrochemical performance. To address these challenges, a structural enhancement combined with surface modification is achieved through trace Y doping. Based on a synergistic combination of experimental results and density functional theory (DFT) calculations, the introduction of partial Y ions at the Na site (2d) acts as a stabilizing pillar, mitigating the electrostatic repulsions between adjacent TMO2 slabs and thereby relieving internal structural stress. Furthermore, the presence of Y effectively optimizes the Ni 3d-O 2p hybridization, resulting in enhanced electronic conductivity and a notable rapid charging ability, with a capacity of 77.3 mA h g-1 at 40 C. Concurrently, the introduction of Y also induces the formation of perovskite nano-islands, which serve to minimize side reactions and modulate interfacial diffusion. As a result, the refined P2-Na0.65 Y0.025[Ni0.33Mn0.67]O2 cathode material exhibits an exceptionally low volume variation (≈1.99%), an impressive capacity retention of 83.3% even at -40 °C after1500 cycles at 1 C.
RESUMO
Complete ethanol oxidation reaction (EOR) in C1 pathway with 12 transferred electrons is highly desirable yet challenging in direct ethanol fuel cells. Herein, PtRh jagged nanowires synthesized via a simple wet-chemical approach exhibit exceptional EOR mass activity of 1.63 A mgPt-1 and specific activity of 4.07 mA cm-2 , 3.62-fold and 4.28-folds increments relative to Pt/C, respectively. High proportions of 69.33% and 73.42% of initial activity are also retained after chronoamperometric test (80 000 s) and 1500 consecutive potential cycles, respectively. More importantly, it is found that PtRh jagged nanowires possess superb anti-CO poisoning capability. Combining X-ray absorption spectroscopy, X-ray photoelectron spectroscopy as well as density functional theory calculations unveil that the remarkable catalytic activity and CO tolerance stem from both the Rh-induced electronic effect and geometric effect (manifested by shortened PtâPt bond length and shrinkage of lattice constants), which facilitates EOR catalysis in C1 pathway and improves reaction kinetics by reducing energy barriers of rate-determining steps (such as *CO â *COOH). The C1 pathway efficiency of PtRh jagged nanowires is further verified by the high intensity of CO2 relative to CH3 COOH/CH3 CHO in infrared reflection absorption spectroscopy.
RESUMO
Layered double hydroxides (LDHs), promising bifunctional electrocatalysts for overall water splitting, are hindered by their poor conductivity and sluggish electrochemical reaction kinetics. Herein, a hierarchical Cu-doped NiCo LDH/NiCo alloy heterostructure with rich oxygen vacancies by electronic modulation is tactfully designed. It extraordinarily effectively drives both the oxygen evolution reaction (151 mV@10 mA cm-2) and the hydrogen evolution reaction (73 mV@10 mA cm-2) in an alkaline medium. As bifunctional electrodes for overall water splitting, a low cell voltage of 1.51 V at 10 mA cm-2 and remarkable long-term stability for 100 h are achieved. The experimental and theoretical results reveal that Cu doping and NiCo alloy recombination can improve the conductivity and reaction kinetics of NiCo LDH with surface charge redistribution and reduced Gibbs free energy barriers. This work provides a new inspiration for further design and construction of nonprecious metal-based bifunctional electrocatalysts based on electronic structure modulation strategies.
RESUMO
BACKGROUND: Previous studies have shown a correlation between depression and obesity, as well as between depression and the Atherogenic Index of Plasma (AIP). However, there is limited research on the association between visceral obesity and depression, as well as the potential mediating role of AIP in this relationship. METHODS: This study included 13,123 participants from the 2005-2018 National Health and Nutrition Examination Survey. Visceral obesity was measured with the Body Roundness Index (BRI), while depression was evaluated with the Patient Health Questionnaire-9. The AIP served as a marker for lipid disorders. To investigate the association between the BRI and depression, multivariate logistic regressions, restricted cubic spline models, subgroup analyses, and interaction tests were used. Additionally, a mediation analysis was conducted to explore the role of AIP in mediating the effect of BRI on depression. RESULTS: There was a positive linear correlation between the BRI and depression. After controlling for all covariates, individuals in the highest BRI (Q4) group had an OR of 1.42 for depression (95% CI: 1.12-1.82) in comparison with individuals in the lowest BRI (Q1) group. Moreover, the AIP partially mediated the association between the BRI and depression, accounting for approximately 8.64% (95% CI: 2.04-16.00%) of the total effect. CONCLUSION: The BRI was positively associated with depression, with the AIP playing a mediating role. This study provides a novel perspective on the mechanism that connects visceral obesity to depression. Managing visceral fat and monitoring AIP levels may contribute to alleviating depression.
Assuntos
Aterosclerose , Depressão , Inquéritos Nutricionais , Obesidade Abdominal , Humanos , Depressão/sangue , Feminino , Masculino , Pessoa de Meia-Idade , Adulto , Aterosclerose/sangue , Obesidade Abdominal/sangue , Índice de Massa Corporal , Modelos Logísticos , Idoso , Biomarcadores/sangueRESUMO
BACKGROUND: Most Chinese joint entity and relation extraction tasks in medicine involve numerous nested entities, overlapping relations, and other challenging extraction issues. In response to these problems, some traditional methods decompose the joint extraction task into multiple steps or multiple modules, resulting in local dependency in the meantime. METHODS: To alleviate this issue, we propose a joint extraction model of Chinese medical entities and relations based on RoBERTa and single-module global pointer, namely RSGP, which formulates joint extraction as a global pointer linking problem. Considering the uniqueness of Chinese language structure, we introduce the RoBERTa-wwm pre-trained language model at the encoding layer to obtain a better embedding representation. Then, we represent the input sentence as a third-order tensor and score each position in the tensor to prepare for the subsequent process of decoding the triples. In the end, we design a novel single-module global pointer decoding approach to alleviate the generation of redundant information. Specifically, we analyze the decoding process of single character entities individually, improving the time and space performance of RSGP to some extent. RESULTS: In order to verify the effectiveness of our model in extracting Chinese medical entities and relations, we carry out the experiments on the public dataset, CMeIE. Experimental results show that RSGP performs significantly better on the joint extraction of Chinese medical entities and relations, and achieves state-of-the-art results compared with baseline models. CONCLUSION: The proposed RSGP can effectively extract entities and relations from Chinese medical texts and help to realize the structure of Chinese medical texts, so as to provide high-quality data support for the construction of Chinese medical knowledge graphs.
Assuntos
Processamento de Linguagem Natural , Humanos , China , Mineração de Dados , População do Leste AsiáticoRESUMO
With digital technological change and the increasing frequency of interregional innovation links, the spatial correlation and diversity of strategic emerging industries' green innovation efficiency (SEI-GIE) need to be explored in depth. This paper innovatively constructs the SEI-GIE input-output index system under digital economy. The proposed grey model FINGBM(1,1) with ω-order accumulation and weighted initial value optimization realizes effective prediction of 7 input-output indicators of 30 provinces in China from 2021 to 2025. Super-SBM-DEA, gravity model, and social network analysis are applied to explore spatial network structure's dynamic process of SEI-GIE from 12th to 14th Five-Year-Plan period (2011-2025). Empirical results show that (1) Under the effect of digital economy, the SEI-GIE in China generally shows a U-shaped fluctuation trend, in which the growth trend in the central region is obvious, and the western region shows significant fluctuations. (2) The spatial correlation network of SEI-GIE presents a complex and stable center-periphery circle. Particularly, the overall increase in network efficiency highlights the strong small-world characteristics. (3) Beijing, Shanghai, Zhejiang and Jiangsu have always been in the leading core position, with strong influence and control; And Tianjin's core position in the network will decline. Additionally, Guangxi and Chongqing have great potential, but Guangdong needs to strengthen its radiation effect. (4) Block model shows that plate-I (Beijing, Tianjin) receive spatial spillovers from others, while plates-III,IV have significant spillover effects. This study provides theoretical reference for policymakers from a network perspective to promote development of China's SEI-GIE.
Assuntos
Análise de Rede Social , China , Indústrias , Modelos Teóricos , InvençõesRESUMO
The root of Paeonia lactiflora pall. is a significant component of traditional Chinese medicine, with terpenoids and their glycosides, such as paeoniflorins, serving as key active ingredients known for their anti-inflammatory, hepatoprotective, and analgesic properties. By generating a transcriptome and functionally characterizing 32 terpene synthases (TPSs) from P. lactiflora, we successfully constructed 24 pESC-Trp-PlTPS expression vectors. Through expression in Saccharomyces cerevisiae engineered strains, we identified four mono-TPSs and five sesqui-TPSs that produce 18 compounds, including eight monoterpenes and ten sesquiterpenes in vitro. This includes a bifunctional enzyme (PlTPS22). Additionally, PlTPS21 was characterized as a pinene synthase with α-pinene as its main product. The expression pattern of PlTPS21 aligns closely with the accumulation patterns of paeoniflorins and α-pinene in the plant, suggesting that PlTPS21 is a key enzyme in the biosynthesis of paeoniflorin.
Assuntos
Alquil e Aril Transferases , Paeonia , Paeonia/genética , Paeonia/enzimologia , Paeonia/metabolismo , Alquil e Aril Transferases/genética , Alquil e Aril Transferases/metabolismo , Regulação da Expressão Gênica de Plantas , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismo , Terpenos/metabolismo , Terpenos/química , Saccharomyces cerevisiae/genética , Saccharomyces cerevisiae/metabolismo , Filogenia , TranscriptomaRESUMO
Alloying-type anodes show capacity and density advantages for sodium/potassium-ion batteries (SIBs/PIBs), but they encounter serious structural degradation upon cycling, which cannot be resolved through conventional nanostructuring techniques. Herein, we present an in-depth study to reveal the intrinsic reason for the pulverization of bismuth (Bi) materials upon (de)alloying, and report a novel particle-in-bulk architecture with Bi nanospheres inlaid in the bulk carbon (BiNC) to achieve durable Na/K storage. We simulate the volume-expansion-resistant mechanism of Bi during the (de)alloying reaction, and unveil that the irreversible phase transition upon (de)alloying underlies the fundamental origin for the structural degradation of Bi anode, while a proper compressive stress (~10 %) raised by the bulk carbon can trigger a "domino-like" Bi crystal recovering. Consequently, the as obtained BiNC exhibits a record high volumetric capacity (823.1â mAh cm-3 for SIBs, 848.1â mAh cm-3 for PIBs) and initial coulombic efficiency (95.3 % for SIBs, 96.4 % for PIBs), and unprecedented cycling stability (15000â cycles for SIBs with only 0.0015 % degradation per cycle), outperforming the state-of-the-art literature. This work provides new insights on the undesirable structural evolution, and proposes basic guidelines for design of the anti-degradation structure for alloy-type electrode materials.
RESUMO
O3-type layered oxides are highly promising cathodes for sodium-ion batteries (SIBs), however they undergo complex phase transitions and exhibit high sensibility to air, leading to subpar cycling performance and commercial viability. In this work, we report a layered cathode material (NaNi0.29Cu0.1Mg0.05Li0.05Mn0.2Ti0.2Sn0.11O2) with a sate-of-the-art high-entropy compositional design. We unveil that such a configuration featuring inhomogeneous coordination environment of transition metal (TM) elements, can enable enhanced gliding energy (-0.38 vs -0.58 eV) of TMO2 slabs upon desodiation both theoretically and experimentally, which underlies the fundamental origin of the outstanding structural stability of HEO materials. As a consequence, the complex phase transitions (O3-O'3-P3-P'3-P3'-O3') of conventional O3-type cathode have been eliminated, and the as-obtained material demonstrates exceptional structural robustness and integrity with an ultra-long cycle life in a quasi-solid-state cell (maintaining 73.2% capacity after 1000 cycles at 2 C). Moreover, the material presents satisfactory air stability, with minimal structural and electrochemical degradation when directly exposed to the air. An Ah-scale pouch cell based on the cathode material is constructed, demonstrating a capacity retention of 83.6% after 500 cycles, signaling substantial promise for commercial applications.
RESUMO
The surface and interface chemistry are critical for controlling the properties of two-dimensional transition metal carbides and nitrides (MXenes). Numerous efforts have been devoted to the functionalization of MXenes with small inorganic ligands; however, few etching methods have been reported on the direct bonding of organic groups to MXene surfaces. In this work, we demonstrated an efficient and rapid strategy for the direct synthesis of 2D Ti3C2Tx MXene nanosheets with organic terminal groups in an organic Lewis acid (trifluoromethanesulfonic acid) solvent, without introducing additional intercalations. The dissolution of aluminum and the subsequent in situ introduction of trifluoromethanesulfonic acid resulted in the extraction of Ti3C2Tx MXene (T=CF3SO3 -) (denoted as CF3SO3H-Ti3C2Tx) flakes with sizes reaching 15â µm and high productivity (over 70 %) of monolayers or few layers. More importantly, the large CF3SO3H-Ti3C2Tx MXene nanosheets had high colloidal stability, making them promising as efficient electrocatalysts for the hydrogen evolution reaction.
RESUMO
Two-dimensional Ti3C2Tx MXene materials, with metal-like conductivities and versatile terminals, have been considered to be promising surface modification materials for Zn-metal-based aqueous batteries (ZABs). However, the oxygen-rich and hybridized terminations caused by conventional methods limit their advantages in inhibiting zinc dendrite growth and reducing corrosion-related side reactions. Herein, -O-depleted, -Cl-terminated Ti3C2Tx was precisely fabricated by the molten salt electrochemical etching of Ti3AlC2, and controlled in situ terminal replacement from -Cl to unitary -S or -Se was achieved. The as-prepared -O-depleted and unitary-terminal Ti3C2Tx as Zn anode coatings provided excellent hydrophobicity and enriched zinc-ionophilic sites, facilitating Zn2+ horizontal transport for homogeneous deposition and effectively suppressing water-induced side reactions. The as-assembled Ti3C2Sx@Zn symmetric cell achieved a cycle life of up to 4200â h at a current density and areal capacity of 2â mA cm-2 and 1â mAh cm-2, respectively, with an impressive cumulative capacity of up to 7.25â Ah cm-2 at 5â mA cm-2//2â mAh cm-2. These findings provide an effective electrochemical strategy for tailoring -O-depleted and unitary Ti3C2Tx surface terminals and advancing the understanding of the role of specific Ti3C2Tx surface chemistry in regulating the plating/stripping behaviors of metal ions.
RESUMO
Ni-rich layered oxide cathode materials demonstrate high energy densities for Li-ion batteries, but the electrochemically driven thermal runaway and mechanical degradation remain their long-standing challenges in practical applications. Herein, it presents a novel ZrV2 O7 (ZVO) coating with negative thermal expansion properties along the secondary particles and primary particle grain boundaries (GBs), to simultaneously enhance the structural and thermal stability of LiNi0.8 Co0.1 Mn0.1 O2 (NCM811). It unveils that, such an architecture can significantly enhance the electronic conductivity, suppress the microcracks of GBs, alleviate the layered to spinel/rock-salt phase transformation, and meanwhile relieve the lattice oxygen loss by increasing the oxygen vacancy formation energy increased (1.43 vs 1.90 eV). Consequently, the ZVO-coated NCM811 material demonstrates a remarkable cyclability with 86.5% capacity retention after 100 cycles, and an outstanding rate performance of 30 C under a high-voltage of 4.6 V, outperforming the state-of-the-art literature. More importantly, the Li+ transportation can be readily blocked at 120 °C by the negative-thermal-expansion ZVO coating, thus avoiding the high-temperature thermal runaway.
RESUMO
BACKGROUND: Ischemia-reperfusion injury (IRI) is an inevitable process in renal transplantation that significantly increases the risk of delayed graft function, acute rejection, and even graft loss. Formyl peptide receptor 2 (FPR2) is an important receptor in multiple septic and aseptic injuries, but its functions in kidney IRI are still unclear. This study was designed to reveal the pathological role of FPR2 in kidney IRI and its functional mechanisms. METHODS: To explore the mechanism of FPR2 in kidney IRI, the model rats were sacrificed after IRI surgery. Immunofluorescence, enzyme-linked immunosorbent assays, and western blotting were used to detect differences in the expression of FPR2 and its ligands between the IRI and control groups. WRW4 (WRWWWW-NH2), a specific antagonist of FPR2, was administered to kidney IRI rats. Kidney function and pathological damage were detected to assess kidney injury and recovery. Flow cytometry was used to quantitatively compare neutrophil infiltration among the experimental groups. Mitochondrial formyl peptides (mtFPs) were synthesized and administered to primary rat neutrophils together with the specific FPR family antagonist WRW4 to verify our hypothesis in vitro. Western blotting and cell function assays were used to examine the functions and signaling pathways that FPR2 mediates in neutrophils. RESULTS: FPR2 was activated mainly by mtFPs during the acute phase of IRI, mediating neutrophil migration and reactive oxygen species production in the rat kidney through the ERK1/2 pathway. FPR2 blockade in the early phase protected rat kidneys from IRI. CONCLUSIONS: mtFPs activated FPR2 during the acute phase of IRI and mediated rat kidney injury by activating the migration and reactive oxygen species generation of neutrophils through the ERK1/2 pathway.
Assuntos
Neutrófilos , Receptores de Formil Peptídeo , Traumatismo por Reperfusão , Animais , Ratos , Sistema de Sinalização das MAP Quinases , Neutrófilos/metabolismo , Peptídeos/metabolismo , Espécies Reativas de Oxigênio/metabolismo , Receptores de Formil Peptídeo/metabolismo , Traumatismo por Reperfusão/metabolismoRESUMO
BACKGROUND: Mesenchymal stem cells (MSCs) are the hotspots of cellular therapy due to their low immunogenicity, potent immunoregulation, and unique renoprotection. The present study aimed to investigate the effects of periosteum-derived MSCs (PMSCs) in ischemia-reperfusion (IR)-mediated renal fibrosis. METHODS: Using cell proliferation assay, flow cytometry, immunofluorescence, and histologic analysis, the differences in cell characteristics, immunoregulation, and renoprotection of PMSCs were compared to the bone marrow-derived MSCs (BMSCs), the most frequently studied stem cells in cellular therapy. In addition, the mechanism of PMSC renoprotection was investigated by 5' end of the RNA transcript sequencing (SMART-seq) and mTOR knockout mice. RESULTS: The proliferation and differentiation capabilities of PMSCs were stronger than those of BMSCs. Compared with BMSCs, the PMSCs exerted a better effect on alleviating renal fibrosis. Meanwhile, the PMSCs more effectively promote Treg differentiation. Treg exhaustion experiment indicated that Tregs exerted an important effect on inhibiting renal inflammation and acted as a critical mediator in PMSC renoprotection. Additionally, SMART-seq results implied that the PMSCs promoted Treg differentiation, possibly via the mTOR pathway. In vivo and in vitro experiments showed that PMSC inhibited mTOR phosphorylation of Treg. After mTOR knockout, the PMSCs failed to promote Treg differentiation. CONCLUSIONS: Compared with BMSCs, the PMSCs exerted stronger immunoregulation and renoprotection that was mainly attributed to PMSC promotion for Treg differentiation by inhibiting the mTOR pathway.
Assuntos
Células-Tronco Mesenquimais , Periósteo , Serina-Treonina Quinases TOR , Animais , Camundongos , Diferenciação Celular/genética , Fibrose , Células-Tronco Mesenquimais/metabolismo , Linfócitos T Reguladores , Serina-Treonina Quinases TOR/metabolismoRESUMO
Edge detection serves as the foundation for advanced image processing tasks. The accuracy of edge detection is significantly reduced when applied to motion-blurred images. In this paper, we propose an effective deblurring method adapted to the edge detection task, utilizing inertial sensors to aid in the deblurring process. To account for measurement errors of the inertial sensors, we transform them into blur kernel errors and apply a total-least-squares (TLS) based iterative optimization scheme to handle the image deblurring problem involving blur kernel errors, whose relating priors are learned by neural networks. We apply the Canny edge detection algorithm to each intermediate output of the iterative process and use all the edge detection results to calculate the network's total loss function, enabling a closer coupling between the edge detection task and the deblurring iterative process. Based on the BSDS500 edge detection dataset and an independent inertial sensor dataset, we have constructed a synthetic dataset for training and evaluating the network. Results on the synthetic dataset indicate that, compared to existing representative deblurring methods, our proposed approach demonstrates higher accuracy and robustness in edge detection of motion-blurred images.
RESUMO
Enhancers are essential cis-acting regulatory elements that determine cell identity and tumor progression. Enhancer function is dependent on the physical interaction between the enhancer and its target promoter inside its local chromatin environment. Enhancer reprogramming is an important mechanism in cancer pathogenesis and can be driven by both cis and trans factors. Super enhancers are acquired at oncogenes in numerous cancer types and represent potential targets for cancer treatment. BET and CDK inhibitors act through mechanisms of enhancer function and have shown promising results in therapy for various types of cancer. Genome editing is another way to reprogram enhancers in cancer treatment. The relationship between enhancers and cancer has been revised by several authors in the past few years, which mainly focuses on the mechanisms by which enhancers can impact cancer. Here, we emphasize SE's role in cancer pathogenesis and the new therapies involving epigenetic regulators (BETi and CDKi). We suggest that understanding mechanisms of activity would aid clinical success for these anti-cancer agents.
RESUMO
Transition-metal phosphides (TMPs) as typical conversion-type anode materials demonstrate extraordinary theoretical charge storage capacity for sodium ion batteries, but the unavoidable volume expansion and irreversible capacity loss upon cycling represent their long-standing limitations. Herein we report a stress self-adaptive structure with ultrafine FeP nanodots embedded in dense carbon microplates skeleton (FeP@CMS) via the spatial confinement of carbon quantum dots (CQDs). Such an architecture delivers a record high specific capacity (778â mAh g-1 at 0.05â A g-1 ) and ultra-long cycle stability (87.6 % capacity retention after 10 000â cycles at 20â A g-1 ), which outperform the state-of-the-art literature. We decode the fundamental reasons for this unprecedented performance, that such an architecture allows the spontaneous stress transfer from FeP nanodots to the surrounding carbon matrix, thus overcomes the intrinsic chemo-mechanical degradation of metal phosphides.
RESUMO
Transition metal single atom electrocatalysts (SACs) with metal-nitrogen-carbon (M-N-C) configuration show great potential in oxygen evolution reaction (OER), whereby the spin-dependent electrons must be allowed to transfer along reactants (OH- /H2 O, singlet spin state) and products (O2 , triplet spin state). Therefore, it is imperative to modulate the spin configuration in M-N-C to enhance the spin-sensitive OER energetics, which however remains a significant challenge. Herein, we report a local field distortion induced intermediate to low spin transition by introducing a main-group element (Mg) into the Fe-N-C architecture, and decode the underlying origin of the enhanced OER activity. We unveil that, the large ionic radii mismatch between Mg2+ and Fe2+ can cause a FeN4 in-plane square local field deformation, which triggers a favorable spin transition of Fe2+ from intermediate (dxy 2 dxz 2 dyz 1 dz2 1 , 2.96 µB ) to low spin (dxy 2 dxz 2 dyz 2 , 0.95 µB ), and consequently regulate the thermodyna-mics of the elementary step with desired Gibbs free energies. The as-obtained Mg/Fe dual-site catalyst demonstrates a superior OER activity with an overpotential of 224â mV at 10â mA cm-2 and an electrolysis voltage of only 1.542â V at 10â mA cm-2 in the overall water splitting, which outperforms those of the state-of-the-art transition metal SACs.