Wearable Vertical Graphene-Based Microneedle Biosensor for Real-Time Ketogenic Diet Management.

Ketogenic diets have attracted substantial interest in the treatment of chronic diseases, but there are health risks with long-term regimes. Despite the advancements in diagnostic and therapeutic methods in modern medicine, there is a huge gap in personalized health management of this dietary strategy. Hence, we present a wearable microneedle biosensor for real-time ketone and glucose monitoring. The microneedle array possesses excellent mechanical properties, allowing for consistent sampling of interstitial biomarkers while reducing the pain associated with skin puncture. Vertical graphene with outstanding electrical conductivity provides the resulting sensor with a high sensitivity of 234.18 µA mM-1 cm-2 and a low limit detection of 1.21 µM. When this fully integrated biosensor was used in human volunteers, it displayed an attractive analytical capability for tracking the dynamic metabolite levels. Moreover, the results of the on-body evaluation established a significant correlation with commercial blood measurements. Overall, this cost-effective and efficient sensing platform can accelerate the application of a ketogenic diet in personal nutrition and wellness management.

Design and application of dual-emission metal-organic framework-based ratiometric fluorescence sensors.

Metal-organic frameworks (MOFs) are novel inorganic-organic hybridized crystals with a wide range of applications. In the last twenty years, fluorescence sensing based on MOFs has attracted much attention. MOFs can exhibit luminescence from metal nodes, ligands or introduced guests, which provides an excellent fluorescence response in sensing. However, single-signal emitting MOFs are susceptible to interference from concentration, environment, and excitation intensity, resulting in poor accuracy. To overcome the shortcomings, dual-emission MOF-based ratiometric fluorescence sensors have been proposed and rapidly developed. In this review, we first introduce the luminescence mechanisms, synthetic methods, and detection mechanisms of dual-emission MOFs, highlight the strategies for constructing ratiometric fluorescence sensors based on dual-emission MOFs, and classify them into three categories: intrinsic dual-emission and single-emission MOFs with luminescent guests, and non-emission MOFs with other luminescent materials. Then, we summarize the recent advances in dual-emission MOF-based ratiometric fluorescence sensors in various analytical industries. Finally, we discuss the current challenges and prospects for the future development of these sensors.

Fully Integrated Ratiometric Fluorescence Enrichment Platform for High-Sensitivity POC Testing of Salivary Cancer Biomarkers.

The point-of-care (POC) testing of cancer biomarkers in saliva with both high sensitivity and accuracy remains a serious challenge in modern clinical medicine. Herein, we develop a new fully integrated ratiometric fluorescence enrichment platform that utilizes acoustic radiation forces to enrich dual-emission sandwich immune complexes for a POC visual assay. As a result, the color signals from red and green fluorescence (capture probe and report probe, respectively) are enhanced by nearly 10 times, and colorimetric sensitivity is effectively improved. When illuminated using a portable UV lamp, the fluorescence color changing from red to green can be clearly seen with the naked eye, which allows a semiqualitative assessment of the carcinoembryonic antigen (CEA) level. In combination with a homemade smartphone-based portable device, cancer biomarkers like CEA are quantified, achieving a limit of detection as low as 0.012 ng/mL. We also directly quantify CEA in human saliva samples to investigate the reliability of this fully integrated platform, thus validating the usefulness of the proposed strategy for clinical diagnosis and home monitoring of physical conditions.

Perilla, sunflower, and tea seed oils as potential dietary supplements with anti-obesity effects by modulating the gut microbiota composition in mice fed a high-fat diet.

PURPOSE: Obesity has become a serious public health problem with its alarmingly increasing prevalence worldwide, prompting researchers to create and develop several anti-obesity drugs. Here, we aimed to investigate the protective effects of perilla seed oil (PSO), sunflower oil (SFO), and tea seed oil (TSO) against obesity through the modulation of the gut microbiota composition and related metabolic changes in mice fed a high-fat diet (HFD). METHODS: Mice were divided into six equal groups: ND (normal diet); HFD; ORL (HFD supplemented with 20 mg/kg body weight of orlistat); PSO, SFO, and TSO (HFD supplemented with 2 g/kg body weight of PSO, SFO, and TSO, respectively). RESULTS: Our findings showed that PSO, SFO, and TSO supplementation significantly reduced body weight, organ weight, blood glucose, lipopolysaccharides (LPS), insulin resistance, and improved serum lipid levels (TG, TC, LDL-C, and HDL-C). Meanwhile, the three treatments alleviated oxidative stress and hepatic steatosis and reduced liver lipid accumulation. Relative mRNA expression levels of inflammatory cytokines (TNF-α, IL-1ß, IL-6, and MCP-1) and lipid synthesis-related genes (PPAR-γ, FAS, and SREBP-1) were down-regulated, while ß-oxidation-related genes (PPAR-α, CPT1a, and CPT1b) were up-regulated in the liver tissue of treated mice. Besides, dietary oil supplementation alleviated HFD-induced gut microbiota dysbiosis by promoting gut microbiota richness and diversity, decreasing the Firmicutes-to-Bacteroidetes ratio, and boosting the abundance of some healthy bacteria, like Akkermansia. CONCLUSIONS: PSO, SFO, and TSO supplementation could alleviate inflammation, oxidative stress, and hepatic steatosis, likely by modulating the gut microbiota composition in HFD-fed mice.

Mulberry leaf and konjac compound powder improves the metabolic capacity of old mice on a high-protein diet by regulating the structure of the intestinal microbiota.

BACKGROUND: The health of elderly individuals is closely linked to their protein intake and the abundance of intestinal microbiota. To investigate the impact of a compound powder made from mulberry leaf and konjac (hereinafter referred to as 'compound powder') on regulating the structure of intestinal microbiota in 15-month-old BALB/c mice that were fed a high-beef-protein diet, 16S rRNA high-throughput sequencing, reverse transcription quantitative polymerase reaction, western blot, and other biochemical methods were used to analyze the differences in intestinal microbiota, protein metabolism-related genes, short-chain fatty acid (SCFA) content, and serum cytokines. RESULTS: The results showed that the compound powder increased the content of SCFAs, reduced the inflammatory reaction of the body, adjusted the abundance of intestinal microbiota (Firmicutes and Bacteroidetes), and increased the ratio of Firmicutes to Bacteroidetes (F/B). Moreover, the compound powder could increase the abundance of Lactobacillus and some non-dominant bacteria that were related to amino acid metabolism and beneficial to human health, such as Eubacterium coprostanoligenes. These beneficial bacteria competitively reduced the abundance of harmful bacteria to protect the intestinal barrier and promote intestinal health, and upregulated the activities of aminopeptidase, proton-coupled oligopeptide transporter 1, and glutamate dehydrogenase at the transcription and translation levels. CONCLUSION: The compound powder could balance the abundance of intestinal microbiota, which may improve the metabolic capacity of old mice on a high-protein diet, and ultimately promoting the well-being of elderly individuals. © 2023 Society of Chemical Industry.

Thermal Shock Synthesis of Nanocatalyst by 3D-Printed Miniaturized Reactors.

High temperature synthesis and treatments are ubiquitous in chemical reactions and material manufacturing. However, conventional sintering furnaces are bulky and inefficient with a narrow temperature range (<1500 K) and slow heating rates (<100 K min-1 ), which are undesirable for many applications that require transient heating to produce ideal nanostructures. Herein, a 3D-printed, miniaturized reactor featuring a dense micro-grid design is developed to maximize the material contact and therefore acheive highly efficient and controllable heating. By 3D printing, a versatile, miniaturized reactor with microscale features can be constructed, which can reach a much wider temperature range (up to ≈3000 K) with ultrafast heating/cooling rates of ≈104 K s-1 . To demonstrate the utility of the design, rapid and batch synthesis of Ru nanoparticles supported in ordered mesoporous carbon is performed by transient heating (1500 K, 500 ms). The resulting ultrafine and uniform Ru nanoparticles (≈2 nm) can serve as a cathode in Li-CO2 batteries with good cycling stability. The miniaturized reactor, with versatile shape design and highly controllable heating capabilities, provides a platform for nanocatalyst synthesis with localized and ultrafast heating toward high temperatures that is otherwise challenging to achieve.

Effect of the mixture of mulberry leaf powder and KGM flour on promoting calcium absorption and bone mineral density in vivo.

BACKGROUND: In this paper, mulberry leaf powder (MLP) and konjac glucomannan (KGM) flour were used as raw materials, and animal experiments were designed to evaluate the effects of a mixture of MLP and KGM on bone density. The femoral bone microstructure of mice and pathological changes were observed by using micro-computed tomography) and haematoxylin and eosin (HE) staining methods, respectively. A three-point bending test was used to determine the biomechanical properties of the femur. RESULTS: Results indicated that the calcium content of MLP was high, reaching 16 148.5 mg kg-1 , and the total proportion of water-soluble calcium, calcium pectinate, and calcium carbonate accounted for about 60% of the total calcium content. Serum alkaline phosphatase (AKP) activity was significantly lower, and serum calcium content was significantly higher (P < 0.05), in the MLP + KGM group (KM) than in the low-calcium control group, whereas no significant difference (P > 0.05) was found for serum phosphorus content. KM had a longer femur length, a higher bone mineral density (BMD) (P > 0.05), and significantly greater femur diameter, dry weight, index and bone calcium content (P < 0.05). However, these parameters were not significantly different from those of the calcium carbonate control group (P > 0.05). CONCLUSION: The results indicate that the MLP/KGM mixture can reduce the high rate of bone turnover and the corresponding loss of bone mass caused by calcium deficiency and is thus effective in enhancing bone density. © 2019 Society of Chemical Industry.

Rapid, High-Temperature, In Situ Microwave Synthesis of Bulk Nanocatalysts.

Carbon-black-supported nanoparticles (CNPs) have attracted considerable attention for their intriguing catalytic properties and promising applications. The traditional liquid synthesis of CNPs commonly involves demanding operation conditions and complex pre- or post-treatments, which are time consuming and energy inefficient. Herein, a rapid, scalable, and universal strategy is reported to synthesize highly dispersed metal nanoparticles embedded in a carbon matrix via microwave irradiation of carbon black with preloaded precursors. By optimizing the amount of carbon black, the microwave absorption is dramatically improved while the thermal dissipation is effectively controlled, leading to a rapid temperature increase in carbon black, ramping to 1270 K in just 6 s. The whole synthesis process requires no capping agents or surfactants, nor tedious pre- or post-treatments of carbon black, showing tremendous potential for mass production. As a proof of concept, the synthesis of ultrafine Ru nanoparticles (≈2.57 nm) uniformly embedded in carbon black using this microwave heating technique is demonstrated, which displays remarkable electrocatalytic performance when used as the cathode in a Li-O2 battery. This microwave heating method can be extended to the synthesis of other nanoparticles, thereby providing a general methodology for the mass production of carbon-supported catalytic nanoparticles.

Konjac glucomannan octenyl succinate (KGOS) as an emulsifier for lipophilic bioactive nutrient encapsulation.

BACKGROUND: Konjac glucomannan octenyl succinate (KGOS) has excellent emulsification properties and can potentially be used in the food industry as an emulsifier, stabilizer and microcapsule wall material. In the present study, the in vitro digestion properties and emulsification capability and stability of KGOS were studied to evaluate the transport and encapsulation characteristics of KGOS with insoluble bioactive nutrients. RESULTS: Confocal scanning laser microscopy (CSLM) suggested that oil droplets could be encapsulated by KGOS into regular spheres. In vitro digestion properties showed that KGOS is effective for colon-targeted transport. ß-Carotene was selected as a representative lipophilic bioactive compound to evaluate the emulsification characteristics of KGOS. The loading capacity of the 0.4 mg mL-1 KGOS solution for ß-carotene was 3.26%, and transmission electron microscopy suggested that the self-aggregate particles of KGOS/ß-carotene (KGOSC) were more uniform than KGOS. With a composition of 0.03% ß-carotene, 0.3% KGOS and 10% medium-chain triglycerides, the emulsification yield of the KGOSC nanoemulsion was more than 95%. After 30 days of storage, the particle size and polydispersity index of the KGOSC nanoemulsion were less than 5 nm and 0.5, respectively, and the sensitivity of KGOSC nanoemulsions to storage conditions decreased in the order temperature, oxygen and light. CONCLUSION: The results of this study suggested that KGOS is a good potential emulsifier and stabilizer for lipophilic bioactive nutrient encapsulation. © 2018 Society of Chemical Industry.

Mulberry leaf and konjac flour compound dietary fiber improves digestion and metabolism in elderly mice with high-fish-protein diet by regulating gut microbiota structure and intestinal tissue repair.

Ensuring sufficient protein intake, efficient digestion, and optimal absorption are crucial for the elderly. This study aims to investigate the potential of a compound dietary fiber, consisting of mulberry leaf and konjac flour (CMK), to enhance the digestion and absorption of a high-fish-protein diet in elderly mice. Results showed that CMK effectively reduced the number of unique peptide segments, generated short-chain fatty acids (SCFA) in feces, improved the content of glutamic pyruvic transaminase (GPT), glutamic oxaloacetic transaminase (GOT), amino acid, and urea nitrogen in serum, activated the contents of pepsin, trypsin, and erepsin, and enhanced the expression of glutamate dehydrogenase (GDH), peptide transporter 1 (PepT1), and aminopeptidase N (APN). Furthermore, CMK demonstrated its ability to decrease the levels of tumor necrosis factor-α (TNF-α), interleukin-1ß (IL-1ß), interleukin-10 (IL-10), lipopolysaccharide (LPS), and lipopolysaccharide binding protein (LBP), while increase the abundance of beneficial bacteria, such as Lactobacillus and Blautia. In conclusion, CMK proved effective in enhancing the digestion and metabolism of protein in elderly mice through the regulation of gut microbiota structure and intestinal tissue repair.

Carbohydrate supplementation retains intestinal barrier and ameliorates bacterial translocation in an antibiotic-induced mouse model.

Bacterial translocation (BT), with antibiotic use as an inducer, is associated with increased risk of developing multiple inflammatory disorders, and is closely associated with intestinal barrier integrity. Deacetylated konjac glucomannan (DKGM) and konjac oligo-glucomannan (KOGM) are two of the most widely used derivatives in the food industry. They are structurally and physiologically distinct from konjac glucomannan (KGM), and previous studies have confirmed their prebiotic effects. But whether they play a role in antibiotic-induced BT is unknown. Here, we applied an antibiotic cocktail (Abx) to a mouse model and investigated whether and how KGM and its derivatives function in BT and inflammation response amelioration during and after antibiotics, and which intervention plan is more effective. The results showed that KGM and its derivatives all inhibited BT. The colon tissue lesions caused by BT were largely alleviated, and short-chain fatty acid (SCFA) production was highly improved with the supplementation of carbohydrates. The prolonged intervention plan using KGM and its derivatives was more efficient than intervention only during the Abx administration period. Among the three dietary fibers, KGM behaved best, while DKGM and KOGM behaved equivalently. Additionally, KGM and its derivatives all reduced the inflammatory response accompanying BT, but DKGM may have a direct inhibitory efficacy in inflammation other than that through IL-10, unlike KGM or KOGM.

Effects of konjac glucomannan on physicochemical and rheological properties of whole egg liquid and in vitro fermentation of egg curd.

The mixture of proteins, polysaccharides, and other nutrients not only safeguards the nutritional value of the food but also demonstrates superior performance compared to these nutrients when used individually. This study aimed to investigate the effects of konjac glucomannan (KGM) on the properties of whole egg liquid (WEL) and the in vitro fermentation of egg curd (made by the mixture of WEL/KGM). The results revealed that the foaming ability (FA) of the mixture decreased, while the foam stability (FS), emulsifying activity (EA), and emulsion stability (ES) of the mixture increased with increasing concentrations of KGM. The concentration of KGM had a significant effect on the sol-gel transition temperature of WEL. Compared to the fermentation broth of E group (without KGM), KGM decreased the pH from 6.65 to 6.16, free ammonia content from 87.53 µg/g to 72.21 µg/g, and sulfide concentration from 580 µg/L to 470 µg/L in the WEL/KGM mixture (EK group). Moreover, KGM slowed down the gas production of intestinal protein fermentation within 10 h, without affecting the final total gas yield. These findings suggest that adding KGM can be an effective strategy to modify the properties of WEL and improve the intestinal fermentation performance of protein-rich foods.

Effects of Starch Addition on KGM Sol's Pasting, Rheological Properties, and Gel Texture.

Konjac tofu is an irreversible gel formed by removing the acetyl group from konjac glucomannan (KGM) through alkaline heating. This type of food is low in calories, filling, and healthy, making it popular in the market. However, pure konjac tofu has a hard texture and lacks flavor when heated. To improve its taste and appearance, the effects of three varieties of native starch, including corn starch (CS), Canna edulis Ker starch (CKS), and potato starch (PS), on the formation of pasting and rheological properties of the KGM sol were investigated. Konjac tofu samples that incorporated different types and quantities of starch were prepared and analyzed in terms of structure, texture, dehydration, and flavor, with pure konjac tofu serving as a reference. The findings revealed that KGM mixed with a concentration of 4.2% CS, or 0.85% CKS, or 0.85% PS of the total mass produced a gel with the highest viscosity and a steady structure. Texture profile analysis indexes of these combinations were superior to pure KGM, and the konjac-starch tofu had a lamellar network structure. Thus, konjac tofu with the addition of starch has a higher quality texture, lower dehydration, and improved flavor compared to pure KGM gel.

Influence of konjac glucomannan and its derivatives on the oral pharmacokinetics of antimicrobial agent in antibiotics cocktails: Keep vigilant on dietary fiber supplement.

In this study, konjac glucomannan (KGM) and its derivatives were gavaged as dietary fiber supplements, followed by a single dose of antibiotic cocktail (Abx) containing amoxicillin, neomycin, metronidazole and vancomycin in mice. The effects of dietary fiber on the pharmacokinetics and tissue distribution of each antibiotic were investigated. The results showed that the specific effects of KGM and its derivatives on the absorption, distribution, and elimination of certain antibiotics varied and depended on the nature of the fibers and the characteristics of the antibiotics. Explicitly, the ingestion of KGM and its derivatives enhanced the absorption of metronidazole by 1.7 times and hindered that of amoxicillin by nearly 36 % without affecting the absorption of neomycin sulfate and vancomycin. KGM and its derivatives had no effect on the distribution of amoxicillin and metronidazole, but DKGM and KGM hindered the distributions of neomycin sulfate (from 1.25 h to 1.62 h) and vancomycin (from 0.95 h to 1.14 h), respectively. KGM and its derivatives promoted the elimination of amoxicillin by nearly 38 % while prolonging that of metronidazole by >50 %. KOGM boosted the elimination of neomycin sulfate and vancomycin, but KGM differed from DKGM in acting on the elimination of both.

Ultrasonic-assisted binding of canistel (Lucuma nervosa A.DC) seed starch with quercetin.

In order to provide a reference for improving the physicochemical properties of starch, the study of starch polyphenol complex interaction has aroused considerable interest. As a common method of starch modification, ultrasound can make starch granules have voids and cracks, and make starch and polyphenols combine more closely. In this research, canistel seed starch was modified by ultrasonic treatment alone or combined with quercetin. The molecular structure, particle characteristics and properties of starch were evaluated. With the increase of ultrasonic temperature, the particle size of the dextrinized starch granules increased, but the addition of quercetin could protect the destruction of starch granule size by ultrasonic; X-ray diffraction and infrared spectra indicated that quercetin was bound to the surface of canistel seed starch through hydrogen bonding, and the complex and the original starch had the same crystal structure and increased crystallinity; by molecular simulation, quercetin bound inside the starch molecular helix preserved the crystalline helical configuration of starch to some extent and inhibited the complete unhelicalization of starch molecules. Meanwhile, hydrogen bonding was the main driving force for the binding of starch molecules to quercetin, and van der Waals interactions also promoted the binding of both. In the physicochemical properties, as the temperature increased after the combination of ultrasonic modified starch combined with quercetin, the solubility, swelling force and apparent viscosity of the compound increased significantly, and it has higher stability and shear resistance.

[Contamination Characteristics and Risk Assessment of Polycyclic Aromatic Compounds in Surface Dust of Suntuan Mining Area in Huaibei].

The Suntuan mining area of Huaibei is a typical coal resource mining base in the Huainan-Huaibei areas in North China. Previous environmental studies related to surface dust in coal mining areas mainly focused on heavy metals and water-soluble ions, with little research on polycyclic aromatic compounds (PACs). In this study, gas chromatography-triple tandem quadrupole mass spectrometry (GC-MS/MS) was used to determine the contents of 16 parent polycyclic aromatic hydrocarbons (16PAHs), alkyl polycyclic aromatic hydrocarbons (aPAHs), and some oxygenated polycyclic aromatic hydrocarbons (OPAHs) in surface dust from the Suntuan mining area and surrounding environment. The results showed that the ΣPACs concentration range of surface dust in the Suntuan mining area was 283.8-36852.5 µg·kg-1 (mean:4114.2 µg·kg-1). ΣaPAHs (mean:2593.8 µg·kg-1) was 2.4 times higher than Σ16PAHs (mean:1074.9 µg·kg-1), which was the main contributor to PAC pollution. The composition of 16PAHs and aPAHs in surface dust was dominated by low molecular polycyclic aromatic hydrocarbons. The average OPAH content was 445.6 µg·kg-1. At the same time, PAC pollution was mainly concentrated around the mining area and near the road of a coal gangue landfill. Based on the positive matrix factor (PMF) analysis, it was inferred that the study area was mainly affected by petroleum sources, followed by coal and biomass combustion, and traffic sources and petroleum product leakage accounted for a relatively small proportion. Based on the ratio and distribution pattern of 16PAHs and aPAHs, it was inferred that when Σ16PAHs/ΣPACs<0.25, it was mainly polluted by the coal mining area. The results of PMF combined with lifetime carcinogenic risk (ILCR) showed that there were potential carcinogenic risks for children near the study area, mainly from coal and biomass burning and coal mining. There are many coal mining areas in Huaihe River Basin in China. The results of this study can provide reference for pollution prevention and control of PACs in these coal mining areas.

Structural complexity of Konjac glucomannan and its derivatives governs the diversity and outputs of gut microbiota.

Deacetylated Konjac Glucomannan (DKGM) and Konjac Oligo-glucomannan (KOGM) as two most widely used derivatives in food industry are structurally and physiologically distinct from Konjac glucomannan (KGM). However, the roles of their distinct structures and physicochemical properties in directing microbiota community and the following outcomes are not fully understood. This paper aims to build links between structural complexity of KGM and its derivatives and microbial metabolism. Results showed that structural alterations changed molecular chain aggregation and water binding ability, thus affected the susceptibility to enzymatic degradation, leading to the distinct microbial composition and outcomes profile. Explicitly, KOGM was distinctive in higher abundances of Catenibacterium and Megasphaera, and lacking Prevotella, which was additionally enriched by KGM and DKGM. KOGM, owned the same butyrate-dominant profile with KGM, was utilized fast. However, KGM possessed the highest fermentability. Severe deacetylation reduced fermentability and led DKGM to a propionate-dominant pattern.

Facile Electroless Plating Method to Fabricate a Nickel-Phosphorus-Modified Copper Current Collector for a Lean Lithium-Metal Anode.

The compatibility of current collectors with reactive Li is key to inducing stable Li cycling and prolonged cycle life of lean Li-metal batteries. Herein, a thin and uniform layer of Ni-P complex was built on the surface of a Cu current collector (NiP@Cu) via an efficient, controllable, and cost-effective electroless plating method. The thickness, morphology, composition, and roughness of the Ni-P deposition were successfully regulated. Lithiophilicity of the current collector was greatly improved by Ni-P deposition, which effectively reduced the Li nucleation overpotential and suppressed the Li dendrite growth. In addition, NiP@Cu promoted an inorganic LiF/Li3P-rich solid electrolyte interphase to facilitate interfacial charge transfer and eliminate excessive side reactions between Li and the electrolyte. As a result, the Coulombic efficiency of half-cells remained above 98.5% for more than 400 cycles at 0.5 mA/cm2 and 98.2% for more than 250 cycles at 1 mA/cm2. Full cells with NiP@Cu also showed superior performance compared to those with bare Cu. This work proposes a promising surface modification method to develop a stable, dendrite-free, and cost-effective anode current collector for high-energy-density lean Li-metal batteries.

Weakly solvated EC-free linear alkyl carbonate electrolytes for Ni-rich cathode in rechargeable lithium battery.

Ethylene carbonate (EC) in the electrolyte is not stable in cells operated at high voltage (≥4.4V) or with Li metal anode, which greatly reduce the energy density and lifetime of the rechargeable lithium battery. Herein, an EC-free linear alkyl carbonate-based electrolyte is developed, which enables the high-voltage (≥4.4V) and low-temperature (-30°C) application of Ni-rich cathode (LiNi0.8Mn0.1Co0.1O2, NCM811). The EC-free system, consisting of LiPF6 and LiNO3 in ternary linear alkyl carbonates, possesses low viscosity, weakly solvated structure, and high interfacial stability with both the Ni-rich cathode and the Li metal anode to avoid continuous electrode/electrolyte side reactions and metal dissolution from the cathode. As a result, the Li||NCM811 cell delivers remarkable capacity retention of 93 ± 0.5% at the voltage of 4.4V and 88 ± 0.6% at 4.5V over 100 cycles. This study provides very encouraging perspective to develop EC-free carbonate-based electrolyte for high-voltage and low-temperature application in high-energy-density rechargeable lithium batteries.

Prevention of loperamide induced constipation in mice by KGM and the mechanisms of different gastrointestinal tract microbiota regulation.

Constipation is one of the most prevalent gastrointestinal tract diseases. Konjac glucomannan (KGM) dietotherapy can effectively relieve the clinical symptoms of patients with constipation. However, the causal relationship among KGM, constipation and different gastrointestinal microbiome (i.e., the stomach {St}, small intestine {S}, and large intestine {L}) remains poorly understood. In this study, constipated mice were treated with KGM (75, 150, 300 mg/kg bw). Results showed that KGM treatment improved the general physiological state, fecal character, small intestinal propulsive rate, gastric emptying rate, MTL and AchE activities, ET-1, 5-HT, and NO levels, and SCFA concentrations. KGM in the diets of constipated mice reduced the diversity of St and S microbiota, while increased those in the L. The KGM intervention regulated the microbiota profile, which afterwards was closer to the normal mouse group: confirmation was provided by different changes of bacteria like Lactobacillus, Bifidobacterium and Allobaculum spp et al.