Low power consumption grating magneto-optical trap based on planar elements.

The grating-based magneto-optical trap (GMOT) is a promising approach for miniaturizing cold-atom systems. However, the power consumption of a GMOT system dominates its feasibility in practical applications. In this study, we demonstrated a GMOT system based on planar elements that can operate with low power consumption. A high-diffraction-efficiency grating chip was used to cool atoms with a single incident beam. A planar coil chip was designed and fabricated with a low power consumption nested architecture. The grating and coil chips were adapted to a passive pump vacuum chamber, and up to 106 87Rb atoms were trapped. These elements effectively reduce the power consumption of the GMOT and have great potential for applications in practical cold-atom-based devices.

Photonic time-delayed reservoir computing based on series-coupled microring resonators with high memory capacity.

On-chip microring resonators (MRRs) have been proposed to construct time-delayed reservoir computing (RC) systems, which offer promising configurations available for computation with high scalability, high-density computing, and easy fabrication. A single MRR, however, is inadequate to provide enough memory for the computation task with diverse memory requirements. Large memory requirements are satisfied by the RC system based on the MRR with optical feedback, but at the expense of its ultralong feedback waveguide. In this paper, a time-delayed RC is proposed by utilizing a silicon-based nonlinear MRR in conjunction with an array of linear MRRs. These linear MRRs possess a high quality factor, providing enough memory capacity for the RC system. We quantitatively analyze and assess the proposed RC structure's performance on three classical tasks with diverse memory requirements, i.e., the Narma 10, Mackey-Glass, and Santa Fe chaotic timeseries prediction tasks. The proposed system exhibits comparable performance to the system based on the MRR with optical feedback, when it comes to handling the Narma 10 task, which requires a significant memory capacity. Nevertheless, the dimension of the former is at least 350 times smaller than the latter. The proposed system lays a good foundation for the scalability and seamless integration of photonic RC.

Magnetic-free polarization rotation in an atomic vapor cell.

Magnetic-free nonreciprocal optical devices have attracted great attention in recent years. Here, we investigated the magnetic-free polarization rotation of light in an atom vapor cell. Two mechanisms of magnetic-free nonreciprocity have been realized in ensembles of hot atoms, including electromagnetically induced transparency and optically-induced magnetization. For a linearly polarized input probe light, a rotation angle up to 86.4° has been realized with external control and pump laser powers of 10 mW and is mainly attributed to the optically-induced magnetization effect. Our demonstration offers a new approach to realize nonreciprocal devices, which can be applied to solid-state atom ensembles and may be useful in photonic integrated circuits.

Polarization-insensitive vortex beam generator by the holographic grating on an integrated multi-layer waveguide.

An integrated polarization-insensitive vortex beam generator is proposed in this study. It is composed of a holographic grating on a multi-layer waveguide, which enables conversion of Transverse Electric (TE) and Transverse Magnetic (TM) waveguide modes to y-polarized and x-polarized optical vortex beams, respectively. The conversion efficiency and the phase fidelity are numerically analyzed, and the working bandwidth is about 100 nm from 1500 nm to 1600 nm with a phase fidelity above 0.7. Moreover, the vortex beam with the superposition of the y-polarization and x-polarization states can be obtained with the incident of the superposition of TE and TM waveguide modes.

Poling-assisted hydrofluoric acid wet etching of thin-film lithium niobate.

Thin-film lithium niobate (TFLN) has been extensively investigated for a wide range of applications due to continuous advancements in its fabrication methods. The recent emergence of high-fidelity ferroelectric domain poling of TFLN provides an opportunity for achieving a precise pattern control of ferroelectric domains and a subsequent pattern transfer to the TFLN layer using hydrofluoric acid (HF). In this work, we present, to the best of our knowledge, the first demonstration of z-cut TFLN microdisks using a poling-assisted HF wet etching approach. By applying intense electric fields, we are able to induce a domain inversion in the TFLN with a designed microdisk pattern. A HF solution is subsequently utilized to transfer the inverted domain pattern to the TFLN layer with the selective etching of -z LN, ultimately revealing the microdisks.

Electro-optically tunable optical delay on a lithium niobate photonic chip.

An approach for continuous tuning of on-chip optical delay with a microring resonator is proposed and demonstrated. By introducing an electro-optically tunable waveguide coupler, the bus waveguide to the resonance coupling can be effectively tuned from the under-coupling regime to the over-coupling regime. The optical delay is experimentally characterized by measuring the relative phase shift between lasers and shows a large dynamic range of delay from -600 to 600 ps and an efficient tuning of delay from -430 to -180 ps and from 40 to 240 ps by only a 5 V voltage.

Repetition rate tuning and locking of solitons in a microrod resonator.

Recently, there has been significant interest in the generation of coherent temporal solitons in optical microresonators. In this Letter, we present a demonstration of dissipative Kerr soliton generation in a microrod resonator using an auxiliary-laser-assisted thermal response control method. In addition, we are able to control the repetition rate of the soliton over a range of 200 kHz while maintaining the pump laser frequency, by applying external stress tuning. Through the precise control of the PZT voltage, we achieve a stability level of 3.9 × 10-10 for residual fluctuation of the repetition rate when averaged 1 s. Our platform offers precise tuning and locking capabilities for the repetition frequency of coherent mode-locked combs in microresonators. This advancement holds great potential for applications in spectroscopy and precision measurements.

Measurement of Nanofiber Mechanical Flexural Modes Based on Near-Field Scattering.

We systematically investigated the intrinsic mechanical flexural modes of tapered optical fibers (TOFs) with a high aspect ratio up to 3×10^{4}. Based on the near-field scattering of the hemispherical microfiber tip to the vibrating TOF evanescent field, we detected more than 320 ordered intrinsic mechanical modes through the TOF transmission spectra which was enhanced by 72 dB compared to without near-field scattering. The trend of the vibration amplitude with the mode order was similar to pendulum waves. Our results open a pathway to study the mechanical modes of photonic microstructures-nanostructures that are expected to be used in waveguide QED, cavity optomechanical, and optical sensing.

Numerical analysis of on-chip acousto-optic modulators for visible wavelengths.

On-chip acousto-optic modulators that operate at an optical wavelength of 780 nm and a microwave frequency of 6.835 GHz are proposed. The modulators are based on a lithium-niobate-on-sapphire platform and efficiently excite surface acoustic waves and exhibit strong interactions with tightly confined optical modes in waveguides. In particular, a high-efficiency phase modulator and single-sideband mode converter are designed. We found that for both microwave and optical wavelengths below 1 µm, the interactions at the cross-sections of photonic waveguides are sensitive to the waveguide width and are significantly different from those in previous studies. Our designed devices have small footprints and high efficiencies, making them suitable for controlling rubidium atoms and realizing hybrid photonic-atomic chips. Furthermore, our devices have the potential to extend the acousto-optic modulators to other visible wavelengths for other atom transitions and for visible light applications, including imaging and sensing.

Exceptional Entanglement Phenomena: Non-Hermiticity Meeting Nonclassicality.

Non-Hermitian (NH) extension of quantum-mechanical Hamiltonians represents one of the most significant advancements in physics. During the past two decades, numerous captivating NH phenomena have been revealed and demonstrated, but all of which can appear in both quantum and classical systems. This leads to the fundamental question: what NH signature presents a radical departure from classical physics? The solution of this problem is indispensable for exploring genuine NH quantum mechanics, but remains experimentally untouched so far. Here, we resolve this basic issue by unveiling distinct exceptional entanglement phenomena, exemplified by an entanglement transition, occurring at the exceptional point of NH interacting quantum systems. We illustrate and demonstrate such purely quantum-mechanical NH effects with a naturally dissipative light-matter system, engineered in a circuit quantum electrodynamics architecture. Our results lay the foundation for studies of genuinely quantum-mechanical NH physics, signified by exceptional-point-enabled entanglement behaviors.