Bioactive-Enhanced Polyetheretherketone Dental Implant Materials: Mechanical Characterization and Cellular Responses.

The aim of this study was to characterize the mechanical properties of a bioactive-modified polyetheretherketone (PEEK) manufacturing approach for dental implants and to compare the in vitro biological behavior with titanium alloy (Ti6Al4V) as the reference. PEEK, PEEK with 5% hydroxyapatite (HA), PEEK with 5% beta-tricalcium phosphate (ßTCP), and Ti6Al4V discs were produced using hot pressing technology to create a functionally graded material (FGM). Surface roughness values (Ra, Rz), water contact angle, shear bond strength, and Vickers hardness tests were performed. Human osteoblasts and gingival fibroblasts bioactivity was evaluated by a resazurin-based method, alkaline phosphatase activity (ALP), and confocal laser scanning microscopy (CLSM) images of fluorescent-stained fibroblasts. Morphology and cellular adhesion were confirmed using field emission gun-scanning electron microscopy (FEG-SEM). Group comparisons were tested using analysis of variance (Tukey post hoc test), α = .05. All groups presented similar roughness values (P > .05). Ti6Al4V group was found to have the highest contact angle (P < .05). Shear bond strength and Vickers hardness of different PEEK materials were similar (P > .05); however, the mean values in the Ti6Al4V group were significantly higher when compared with those of the other groups (P < .05). Cell viability and proliferation of osteoblast and fibroblast cells were higher in the PEEK group (P < .05). PEEK-ßTCP showed the highest significant ALP activity over time (P < .05 at 14 days of culture). An enhanced bone and soft-tissue cell behavior on pure PEEK was obtained to the gold standard (Ti6Al4V) with equivalent roughness. The results substantiate the potential role of chemical composition rather than physical properties of materials in biological responses. The addition of 5% HA or ßTCP by FGM did not enhance PEEK mechanical properties or periodontal cell behavior.

Laser Nd:YAG patterning enhance human osteoblast behavior on zirconia implants.

Zirconia has been regarded as a promising material for dental implants, and Nd:YAG laser treatment has been proposed as a potential strategy to improve its bioactivity. The main aim of the present study was to evaluate the in vitro behavior of human fetal osteoblasts in contact with laser-textured zirconia implant surfaces assessing the effect of different texture patterns, spacing between laser passes and number of laser passes. Zirconia discs were produced and treated with Nd:YAG laser according to test group variables: texture (microgrooves and micropillar array), distance between surface features (25 µm, 30 µm and 35 µm), and laser passes [1, 2, 4, and 8]. Untextured sandblasted and acid-etched zirconia discs (SBAE) were used as controls. Human osteoblasts (hFOB 1.19) were cultured for 14 days on test and control samples. Morphology and cellular adhesion were observed using scanning electron microscopy (SEM). Cell viability and proliferation were evaluated at 1, 3, 7, and 14 days using a commercial resazurin-based method. Collagen type I was evaluated at 3 days using ELISA. Alkaline phosphatase (ALP) activity was evaluated at 7 days using a colorimetric enzymatic technique. Group comparisons were tested using ANOVA or Mann-Whitney test (Tukey's post hoc) using statistical software, and significance was set at p < 0.05. Cell viability and proliferation increased over time for all groups with statistically higher values for laser-textured groups when compared with control at 7 and 14 days in culture (p < 0.05). Collagen type I levels were higher for study groups (p < 0.05) when compared with control group. No statistically differences were detected for ALP activity levels between texture and control groups (p > 0.05). The results suggest that laser-machined zirconia implant surfaces may benefit biological osteoblast response. However, the type of texture, spacing at the range of 25-35 µm, and number of laser passes did not seem to be relevant variables.

Usefulness of anorectal and endovaginal 3D ultrasound in the evaluation of sphincter and pubovisceral muscle defects using a new scoring system in women with fecal incontinence after vaginal delivery.

PURPOSE: This study aims to evaluate pubovisceral muscle and anal sphincter defects in women with previous vaginal delivery and fecal incontinence and to correlate the findings with the severity of symptoms using the combined anorectal and endovaginal 3D ultrasonography with a new ultrasound scoring system. METHODS: Consecutive female patients with previous vaginal delivery and fecal incontinence symptoms were screened. Fecal incontinence was assessed with the Cleveland Clinic Florida fecal incontinence scale, and the extent of defects was assessed by an ultrasound score based on results of anorectal and endovaginal 3D ultrasound. Fecal incontinence was assessed with the Cleveland Clinic Florida fecal incontinence scale. RESULTS: Of 84 women with previous vaginal delivery and fecal incontinence, 21 (25%) had intact pubovisceral muscles and anal sphincters; 63 (75%) had a pubovisceral muscle or anal sphincter defect, or both. Twenty-eight (33%) had a pubovisceral muscle defect [23% with an external anal sphincter (EAS) defect or combined EAS/internal anal sphincter defects; 11% with intact anal sphincters]. Thirty-five (42%) had intact pubovisceral muscles and an anal sphincter defect. Compared with women with intact pubovisceral muscles/anal sphincter defects, patients with pubovisceral muscle defects had significantly higher incontinence scores and significantly higher ultrasound scores indicating more extensive defects. Incontinence symptoms correlated positively with the ultrasound score, measurements of sphincter defects, and area of the levator hiatus. CONCLUSIONS: Evaluation of both pubovisceral muscles and anal sphincters is important to identify defects and determine treatment for women with fecal incontinence after vaginal delivery. The severity of fecal incontinence symptoms is significantly related to the extent of defects of the pubovisceral muscles and anal sphincters.

Correlation Between Echodefecography and 3-Dimensional Vaginal Ultrasonography in the Detection of Perineal Descent in Women With Constipation Symptoms.

BACKGROUND: Defecography is an established method of evaluating dynamic anorectal dysfunction, but conventional defecography does not allow for visualization of anatomic structures. OBJECTIVE: The purpose of this study was to describe the use of dynamic 3-dimensional endovaginal ultrasonography for evaluating perineal descent in comparison with echodefecography (3-dimensional anorectal ultrasonography) and to study the relationship between perineal descent and symptoms and anatomic/functional abnormalities of the pelvic floor. DESIGN: This was a prospective study. SETTING: The study was conducted at a large university tertiary care hospital. PATIENTS: Consecutive female patients were eligible if they had pelvic floor dysfunction, obstructed defecation symptoms, and a score >6 on the Cleveland Clinic Florida Constipation Scale. INTERVENTIONS: Each patient underwent both echodefecography and dynamic 3-dimensional endovaginal ultrasonography to evaluate posterior pelvic floor dysfunction. MAIN OUTCOME MEASURES: Normal perineal descent was defined on echodefecography as puborectalis muscle displacement ≤2.5 cm; excessive perineal descent was defined as displacement >2.5 cm. RESULTS: Of 61 women, 29 (48%) had normal perineal descent; 32 (52%) had excessive perineal descent. Endovaginal ultrasonography identified 27 of the 29 patients in the normal group as having anorectal junction displacement ≤1 cm (mean = 0.6 cm; range, 0.1-1.0 cm) and a mean anorectal junction position of 0.6 cm (range, 0-2.3 cm) above the symphysis pubis during the Valsalva maneuver and correctly identified 30 of the 32 patients in the excessive perineal descent group. The κ statistic showed almost perfect agreement (κ = 0.86) between the 2 methods for categorization into the normal and excessive perineal descent groups. Perineal descent was not related to fecal or urinary incontinence or anatomic and functional factors (sphincter defects, pubovisceral muscle defects, levator hiatus area, grade II or III rectocele, intussusception, or anismus). LIMITATIONS: The study did not include a control group without symptoms. CONCLUSIONS: Three-dimensional endovaginal ultrasonography is a reliable technique for assessment of perineal descent. Using this technique, excessive perineal descent can be defined as displacement of the anorectal junction >1 cm and/or its position below the symphysis pubis on Valsalva maneuver.

Hyaluronic acid-based gels for oral application: Comparison of in vitro effects on gingival cells and bacteria.

Purpose: This study aimed to evaluate the cytotoxic effects of different topical hyaluronic acid-based gels on human gingival fibroblasts and oral bacteria. Methods: Four different hyaluronate gels - Bexident® Aftas (BA), GUM® AftaClear (AfC), Gengigel®(G), Aloclair® Plus (AlC) and a chlorhexidine gel - Bexident®Gums(BG) were selected. Human gingival fibroblasts (HGF) were seeded in 48-well plates with different gel/culture medium concentrations (v/v%) and cell viability was evaluated at 1 and 3 days of culture. Cell morphology was assessed, and alterations graded according to ISO 10993-5:2009(E). Streptococcus oralis CECT 907T colony was, seed on 48-well plate or spread onto the blood agar plates and exposed to the different gel's concentration. The optical density (OD) was assessed, and the diameter of the inhibition zone was measured (mm). Results: BA and G elicited reduced HGF cytotoxicity, followed by AfC. AlC and BG were cytotoxic at concentrations up to 3% for all exposure times. PCM images of HGF showed moderate-to-severe alterations for AlC and BG and slight to mild changes, for BA, AfC and G. The highest antibacterial activity against S.oralis was observed on AlC and AfC, and no antibacterial activity was observed for BA and G. Inhibitory effect in sessile colonies was only observed in AlC and BG. Conclusions: AlC demonstrated superior antibacterial activities against S.oralis but a higher cytotoxic potential in HGF. BA and G presented the lowest cytotoxicity with little to no antibacterial effect. AfC demonstrated bacteriostatic effects and low cytotoxicity on HGF.

Cellular responses to 3D printed dental resins produced using a manufacturer recommended printer versus a third party printer.

PURPOSE: The aim of this study was to evaluate the influence of different 3D dental resins, using a manufacturer recommended printer and a third-party printer, on cellular responses of human gingival cells. MATERIALS AND METHODS: Three NextDent resins (Denture 3D+, C&B MFH and Crowntec) were used to produce specimens on printers NextDent 5100 (groups ND, NC and NT, respectively) and Phrozen Sonic Mini 4K (groups PD, PC and PT, respectively). Human gingival fibroblasts were cultured and biocompatibility was evaluated on days 1, 3 and 7. IL-6 and IL-8 concentrations were evaluated at 3 days using ELISA. Surface roughness was evaluated by a contact profilometer. SEM and fluorescence micrographs were analyzed at days 1 and 7. Statistical analyses were performed using SPSS and mean differences were tested using ANOVA and post-hoc Tukey tests (P < .05). RESULTS: There was an increase in cellular viability after 7 days in groups PC and PT, when compared to group PD. ND group resulted in higher concentration of IL-6 when compared to PT group. SEM and fluorescence micrographs showed less adhesion and thinner morphology of fibroblasts from group PD. No significant differences were found regarding surface roughness. CONCLUSION: The use of different printers or resins did not seem to influence surface roughness. NextDent 5100 and Phrozen Sonic Mini 4K produced resins with similar cellular responses in human gingival fibroblasts. However, Denture 3D+ resin resulted in significantly lower biocompatibility, when compared to C&B MFH and Crowntec resins. Further testing is required to support its long-term use, required for complete dentures.

Cell Biological and Antibacterial Evaluation of a New Approach to Zirconia Implant Surfaces Modified with MTA.

Peri-implantitis continues to be one of the major reasons for implant failure. We propose a new approach to the incorporation of MTA into zirconia implant surfaces with Nd:YAG laser and investigate the biological and the microbiological responses of peri-implant cells. Discs of zirconia stabilized with yttria and titanium were produced according to the following four study groups: Nd:YAG laser-textured zirconia coated with MTA (Zr MTA), Nd:YAG laser-textured zirconia (Zr textured), polished zirconia discs, and polished titanium discs (Zr and Ti). Surface roughness was evaluated by contact profilometry. Human osteoblasts (hFOB), gingival fibroblasts (HGF hTERT) and S. oralis were cultured on discs. Cell adhesion and morphology, cell differentiation markers and bacterial growth were evaluated. Zr textured roughness was significantly higher than all other groups. SEM images reveal cellular adhesion at 1 day in all samples in both cell lines. Osteoblasts viability was lower in the Zr MTA group, unlike fibroblasts viability, which was shown to be higher in the Zr MTA group compared with the Zr textured group at 3 and 7 days. Osteocalcin and IL-8 secretion by osteoblasts were higher in Zr MTA. The Zr textured group showed higher IL-8 values released by fibroblasts. No differences in S. oralis CFUs were observed between groups. The present study suggests that zirconia implant surfaces coated with MTA induced fibroblast proliferation and osteoblast differentiation; however, they did not present antibacterial properties.

Bio-Piezoelectric Ceramic Composites for Electroactive Implants-Biological Performance.

Barium titanate (BaTiO3) piezoelectric ceramic may be a potential alternative for promoting osseointegration due to its piezoelectric properties similar to bone electric potentials generated in loading function. In this sense, the aim of this in vitro study was to evaluate the cellular response of human osteoblasts and gingival fibroblasts as well as the impact on S. oralis when in contact with BaTiO3 functionalized zirconia implant surfaces with piezoelectric properties. Zirconia discs with BaTiO3 were produced and contact poling (piezo activation) was performed. Osteoblasts (hFOB 1.19), fibroblasts (HGF hTERT) and S. oralis were culture on discs. Cell viability and morphology, cell differentiation markers, bacterial adhesion and growth were evaluated. The present study suggests that zirconia composite surfaces with the addition of piezoelectric BaTiO3 are not cytotoxic to peri-implant cells. Also, they seem to promote a faster initial osteoblast differentiation. Moreover, these surfaces may inhibit the growth of S. oralis by acting as a bacteriostatic agent over time. Although the piezoelectric properties do not affect the cellular inflammatory profile, they appear to enable the initial adhesion of bacteria, however this is not significant over the entire testing period. Furthermore, the addition of non-poled BaTiO3 to zirconia may have a potential reduction effect on IL-6 mediated-inflammatory activity in fibroblasts.

Human Gingival Fibroblast and Osteoblast Behavior on Groove-Milled Zirconia Implant Surfaces.

Two type of cells representing periodontal hard tissues (osteoblasts) and soft tissues (fibroblasts) were evaluated in response to microgroove-milled zirconia surfaces. A total of 90 zirconia discs were randomly assigned to four width-standardized milling microgroove-textured groups and a control group without grooves (UT). The sandblast and acid-etch protocol were applied to all samples. Both cell lines were cultured on zirconia discs from 1 day up to 14 days. Cell morphology and adhesion were evaluated after 1 day of culturing. Cell viability and proliferation of the cells were measured. Alkaline phosphatase activity, collagen I, osteopontin, interleukin 1ß and interleukin 8 secretions were assessed at predefined times. The results obtained were presented in the form of bar graphs as means and standard deviations. Multi comparisons between groups were evaluated using two-away ANOVA or Mann−Whitney tests, and a p-value < 0.05 was established. Group comparisons with regard to cell viability, proliferation and secretion of collagen I, interleukin-1ß and interleukin 8 revealed no statistically significant differences. The alkaline phosphatase activity and osteopontin secretion were significantly higher in the group with a large groove compared to the small one and the control group. Nevertheless, the viability of gingival and bone cells did not appear to be affected by the milled microgroove texture compared to the conventional sandblasted and acid-etched texture, but they seem to influence osteoblasts' cellular differentiation.

Modification of Zirconia Implant Surfaces by Nd:YAG Laser Grooves: Does It Change Cell Behavior?

The aim of this study was to evaluate gingival fibroblasts and human osteoblasts' response to textured Nd:YAG laser microgrooves, with different dimensions, on zirconia implant surfaces. A total of 60 zirconia disks (8 mm in diameter and 2 mm in thickness) were produced and divided between four study groups (N = 15): three laser-textured (widths between 125.07 ± 5.29 µm and 45.36 ± 2.37 µm and depth values from 50.54 ± 2.48 µm to 23.01 ± 3.79 µm) and a control group without laser treatment. Human osteoblasts and gingival fibroblasts were cultured on these surfaces for 14 days. FEG-SEM (Field Emission Gun-Scanning Electron Microscope) images showed cellular adhesion at 24 h, with comparable morphology in all samples for both cell types. A similar cell spreading within the grooves and in the space between them was observed. Cell viability increased over time in all study groups; however, no differences were found between them. Additionally, proliferation, ALP (Alkaline phosphatase) activity, collagen type I, osteopontin and interleukin levels were not significantly different between any of the study groups for any of the cell types. Analysis of variance to compare parameters effect did not reveal statistically significant differences when comparing all groups in the different tests performed. The results obtained revealed similar cell behavior based on cell viability and differentiation on different microtopographic laser grooves, compared to a microtopography only established by sandblasting and acid-etching protocol, the reference surface treatment on zirconia dental implants.

Peri-implant cell response on groove and pore-textured zirconia surfaces.

OBJECTIVES: This study aimed to assess the independent influence of grooves and pores texturized by milling on gold-standard zirconia implant surfaces. METHODS: Milled groove and pore textured with equivalent width, depth, and spacing on zirconia discs were produced using press and sintering techniques. All samples were sandblasted and acid-etched (SBAE), and untextured discs were used as controls. Osteoblasts and fibroblasts were cultured on discs for 14 days. Field emission gun-scanning electron microscopy (FEG-SEM) was used to observe cellular adhesion and morphology. Cell viability and proliferation assays were performed. Additionally, alkaline phosphatase activity, collagen type I, and osteopontin were evaluated at pre-defined time points. Results are presented as mean and standard deviation (SD), group comparisons were tested using one-way ANOVA (Tukey's post-hoc), and significance was set at P < 0.05. RESULTS: FEG-SEM images revealed cellular adhesion at 24 h in all samples with differences in distribution. Although both cell lines showed increased cell viability and differentiation cell markers such as collagen and osteopontin over time, statistically significant differences between groups were found in none of the quantitative study variables (P > 0.05). CONCLUSION: The results suggest similar cellular behavior between different patterns with similar dimensions and between them and microtopography by SBAE protocol currently used as the gold-standard for zirconia dental implants. The addition of pore and groove microtextures to the gold-standard zirconia dental implant surfaces treated with SBAE does not seem to be an asset in the cellular behavior of the hard and soft tissue cells.

Laser surface treatment on Yttria-stabilized zirconia dental implants: Influence on cell behavior.

Yttria-stabilized zirconia (YSZ) is being proposed as an alternative material to Titanium for dental implants due to its aesthetic and biocompatibility properties. However, is it yet to define the optimal surface treatment to improve YSZ bioactivy. Texturization is a promising approach, but the biological role of patterned YSZ surfaces in cell cultures is yet to be determined. Thus, cellular behavior of osteoblasts and fibroblasts in contact with groove-texturized YSZ surfaces was investigated. YSZ discs were groove-textured by conventional milling and Nd:YAG laser. All samples including control were sandblasted and acid-etched. Human osteoblasts and fibroblasts were cultured on discs for 14 days. Morphology and cellular adhesion were observed. Cell viability, interleukin-1ß, osteopontin, collagen type I prodution, alkaline phosphatase activity, and interleukin-8 were measured. YSZ texturization by conventional milling improved osteoblasts viability and differentiation when compared to laser texturization. Fibroblasts behavior did not seem to be influenced by the texturing technique. Compared to sandblasting and acid etching currently used as gold standard for zirconia dental implants no superiority of macrotexturization was found.

Emoji as promising tools for emotional evaluation in orthodontics.

BACKGROUND: Emoji are pictograms frequently used in social networks capable of expressing emotions. These tools can provide insights into people's behavior that could not be obtained with the use of textual communication. Recently, emoji have been introduced to various research fields as successful alternatives to word-based questionnaires for measure emotional responses. The objective of this study was to preliminarily evaluate the discriminating ability and relationship of these tools with different occlusal conditions/malocclusions. METHODS: Online surveys were applied to adult individuals (n = 201; mean age = 27.4 ± 5.7; 37.3% males, 62.7% females). Subjects issued acceptance scores (10-point scale) and expressed their emotional status using a 30-emoji list in relation to nine occlusal conditions: C1-crowding, C2-anterior open bite, C3-interincisal diastema, C4-increased overjet + deep bite (Class II div. 1), C5-anterior crossbite (Class III), C6-ideal occlusion, C7-unilateral posterior crossbite, C8-anterior open bite plus bilateral posterior crossbite plus crowding, and C9-deep bite (Class II div. 2). Cochran's Q and McNemar tests were used to compare the frequencies of choice of emoji between conditions. Correspondence analyses were applied to assess the association between occlusal conditions and emoji. Kendall's correlation coefficient was calculated to evaluate the relationship between mean acceptance scores and frequency counts of each emoji. RESULTS: The frequency of choice between conditions showed a significant difference for 25 of the 30 emoji (P < 0.05), indicating an adequate discriminating ability of these tools. Emoji were grouped predominantly based on their emotional valence (positive/negative) and arousal/activation (high/low). Positive emoji were associated with the most accepted conditions (i.e., C6, C3), while negative emoji with the most rejected ones (i.e., C8, C1, C2). Although only weak, positive correlations between acceptance and positively valenced emoji, and negative correlations between acceptance and negatively valenced emoji were observed (P < 0.05). CONCLUSIONS: Emoji have an adequate discriminatory ability and would allow determining emotional profiles in the face of different occlusal conditions. Further research is necessary to consolidate the use of these tools in an instrument that allows measuring emotional responses.

Probiotics and dairy products in dentistry: A bibliometric and critical review of randomized clinical trials.

The oral environment is an essential part of the human microbiome. The consumption of probiotic products may improve the oral microbiota and reduce the risk of diseases. This paper presents a bibliometric and critical review of randomized clinical trials (RCTs) that used probiotics to analyze oral parameters in humans. RCTs carried out with no age, gender, and ethnicity restrictions and published in the pre-COVID-19 period were included. Furthermore, the utilization of probiotic dairy products to improve oral health is discussed. The bibliometric review demonstrated that 'Microbiology,' 'Dental caries,' and 'Streptococcus mutants' were the most highlighted keywords. Furthermore, Sweden and India have the highest number of publications. The most prevalent outcomes were 'salivary parameters,' 'periodontal disease,' and 'dental caries.' The most used vehicles for probiotic administration were pharmaceutical formulas and dairy products. The administration of probiotic dairy products could modify the oral microbiota (reductions in S. mutans counts), influence the caries development and periodontal disease in children, adolescents, adults, and the elderly, and improve gingival health. The main probiotic dairy products investigated were milk, fermented milk, yogurt, kefir, curd, and cheese. Lacticaseibacillus paracasei SD1 was the most used probiotic culture. The studies demonstrated that the probiotic effect lasted 2-4 weeks after discontinuing consumption. However, the results depended on the subject type, study design, probiotic strain and concentration, and dairy product type. In conclusion, probiotic dairy products are promising alternatives to improve oral health.

Probiotic fermented milks: Children's emotional responses using a product-specific emoji list.

This study aimed to develop and validate a product-specific emoji list and use this list to analyse children's emotional responses associated with the consumption of probiotic fermented milks prepared with different probiotic strains. Furthermore, the overall liking of the products was studied during a sensory test. Six formulations were studied: Bifidobacterium BB12 (BB), Lactobacillus acidophilus L3 (LA3), Lactobacillus acidophilus LA 05 (LA5), Lactobacillus delbrueckii subsp. lactis (LL), Lacticaseibacillus casei 01 (LC), and Streptococcus thermophilus and Lactobacillus delbrueckii subsp. bulgaricus (CONV). A total of 132 children (7-14 years old) participated in two study phases: development (n = 32) and validation (n = 100) of the list. Fifteen emoji were selected to be included in the product-specific list, which had a high frequency of citations in the first phase. The formulations with the highest overall liking (LL, BB, LC and CONV) were correlated with positive emoji, while the least-liked formulations (LA3 and LA5) were associated with negative emoji. Furthermore, the utilisation of emoji enabled the differentiation among formulations with similar overall liking. Therefore, this study developed and validated an emoji list to be used in the evaluation of fermented milks by children. The results suggest that the type of probiotic culture impacted the sensory characteristics of fermented milks, supporting the use of Bifidobacterium, L. lactis or L. casei in these products.

Pulmonary Arteriovenous Malformation can be Associated with Embolic Stroke of Undetermined Source (ESUS).

Pulmonary arteriovenous malformations (PAVMs) are rare vascular anomalies. Alternative designations are pulmonary arteriovenous fistulae or aneurysms. Although mostly asymptomatic, PAVMs can cause respiratory symptoms due to right-to-left shunt. The central nervous system is a potential target for complications, including stroke, as a result of paradoxical embolism. In this report, the authors describe an unusual case of cerebral emboli caused by paradoxical embolism through a PAVM, presenting with a broad pathology including orthodeoxia, central cyanosis and digital clubbing, which should be kept in mind since misdiagnosis may cause severe morbidity in young adults. LEARNING POINTS: Pulmonary arteriovenous fistulae, although rare, must be considered in the presence of dyspnoea, cyanosis, hypoxaemia/orthodeoxia and stroke.In young adults with embolic stroke of undetermined source (ESUS), paradoxical embolism has to be ruled out.Meticulous anamnesis and physical examination can guide diagnostic investigation, reducing hospitalization time and superfluous complementary examinations.

Foodborne Botulism: Neglected Diagnosis.

Botulism is rare neuroparalytic disease caused by botulinum toxin, one of the most toxic substances known. Foodborne botulism is caused by consumption of foods contaminated with botulinum toxin. The clinical manifestations are flaccid, symmetrical, descending paralysis affecting cranial and peripheral nerves. The only specific treatment is botulinum antitoxin. We report the case of a 37-year-old man with gastrointestinal manifestations and posterior cranial nerve palsy who was diagnosed with botulism infection. Clinicians should be aware of rare causes of infection and determine the aetiology of symptoms. LEARNING POINTS: Botulism remains a diagnostic challenge.Misdiagnosis of early cases suggests sporadic cases are overlooked.Timely clinical diagnosis is critical for treatment decisions as botulinum antitoxin cannot reverse existing paralysis.

Disseminated Gonococcal Infection: A Case Report of Arthritis-Dermatitis Syndrome.

The bacteremic spread of the sexually transmitted pathogen, Neisseria gonorrhoeae (N. gonorrhoeae), results in disseminated gonococcal infection (DGI), which can lead to a variety of clinical signs and symptoms, such as multiple skin lesions, tenosynovitis and arthralgias/arthritis. The Centers for Disease Control and Prevention listed that drug-resistant N. gonorrhoeae (cephalosporin resistance) poses an urgent threat due to antimicrobial resistance. The authors describe the case of a young woman presenting in the emergency department (ED) with skin lesions and malaise. DGI was confirmed by blood cultures, nucleic acid amplification testing (NAAT) in cervical mucosa and urine gonococcal probe. One week of intravenous ceftriaxone was administrated with complete clinical and analytical resolution. The patient made a full clinical recovery. Clinicians must be aware of the signs and symptoms of this rare yet reemerging disease.

Acquired von Willebrand Syndrome and Chronic Anaemia: A Different Diagnostic Approach.

Heyde's syndrome is a form of acquired von Willebrand syndrome that consists of bleeding from intestinal angiodysplasia in the presence of aortic stenosis (AS). An association with obstructive hypertrophic cardiomyopathy, rather than AS, by a similar mechanism has also been described. We report the case of a 78-year-old woman with chronic anaemia and hypertrophic obstructive cardiomyopathy in whom intestinal angiodysplasia with active bleeding was identified by an unconventional method. In this case, the authors describe a different approach to reach the correct diagnosis. LEARNING POINTS: In patients with anaemia due to gastrointestinal bleeding, a high level of suspicion is crucial to identify the haemorrhagic focus.Intestinal angiodysplasia is associated with acquired von Willebrand syndrome.Acquired von Willebrand syndrome secondary to hypertrophic obstructive cardiomyopathy occurs by the same mechanism of aortic stenosis.

Hard and Soft Tissue Cell Behavior on Polyetheretherketone, Zirconia, and Titanium Implant Materials

PURPOSE: The aim of this study was to characterize and compare the behavior of human osteoblasts and human gingival fibroblasts in contact with polyetheretherketone (PEEK), zirconia, and titanium implant surface materials. MATERIALS AND METHODS: PEEK, yttria-stabilized zirconia (YTZP), and titanium discs were produced under appropriate and similar conditions to achieve controlled surface features. Human osteoblasts and human gingival fibroblasts were cultured on discs for 14 days. Cell viability and proliferation were evaluated using a resazurin-based method. Morphology and cellular adhesion were observed using field emission gun-scanning electron microscopy (FEG-SEM). Alkaline phosphatase (ALP) activity and bone cell mineralization were evaluated on osteoblasts. Confocal laser scanning microscopy (CLSM) images of fluorescent-stained fibroblasts were obtained at 7 and 14 days of the culture. Results were presented as mean and standard deviation (SD). Group comparisons were tested using analysis of variance (ANOVA) (Tukey's post hoc) with appropriate statistical software, and significance was set at P < .05. RESULTS: Cell viability and proliferation were higher in PEEK and YTZP groups compared with titanium on osteoblast cells (P < .05, all time points) and on fibroblasts (P < .05, 7 and 14 days). All groups showed an increase in ALP activity over time, which was not significant. Mineralization patterns demonstrated an increase in mineral content over time, which was more apparent in the YTZP group. Cell spreading was more evident on PEEK and YTZP specimens. CONCLUSION: The results suggest increased adhesion, viability, and proliferation of osteoblasts and gingival fibroblasts on zirconia and PEEK surfaces compared with titanium. These results are correlated with the increased wettability of these materials.