Review of susceptibility genes in developmental dysplasia of the hip: A comprehensive examination of candidate genes and pathways.

Developmental dysplasia of the hip (DDH) is one of the most prevalent skeletal deformities, primarily due to the incompatibility between the acetabulum and femoral head. It includes complete dislocation, partial dislocation, instability with femoral head subluxation, and a range of imaging abnormalities that reflect inadequate acetabular formation. Known risk factors for DDH include positive family history, sex, premature birth, non-cephalic delivery, oligohydramnios, gestational diabetes mellitus, maternal hypertension, associated anomalies, swaddling clothes, intrauterine space restriction, and post-term pregnancy. Various research designs have been employed in DDH studies to identify relevant genes, including candidate gene association studies (CGAS), genome-wide association studies (GWAS), restriction fragment length polymorphism (RFLP), and whole exome sequencing (WES). To date, multiple DDH-associated genes have been identified in various populations. Despite extensive research into the epidemiology, risk factors, and genes associated with DDH, its pathogenesis remains unclear. This study provides a comprehensive summary of DDH research designs and evidence for relevant gene mutations through a PubMed search.

Is Adolescent Obesity Associated With a Higher Risk for Pelvic Fractures in Motor Vehicle Collisions?

INTRODUCTION: The impact of obesity on the incidence of blunt pelvic fractures in adults is unclear, and adolescents may have an increased risk of fracture due to variable bone mineral density and leptin levels. Increased subcutaneous adipose tissue may provide protection, though the association between obesity and pelvic fractures in adolescents has not been studied. This study hypothesized that obese adolescents (OAs) presenting after motor vehicle collision (MVC) have a higher rate of pelvic fractures, and OAs with such fractures have a higher associated risk of complications and mortality compared to non-OAs. METHODS: The 2017-2019 Trauma Quality Improvement Program database was queried for adolescents (12-16 y old) presenting after MVC. The primary outcome was a pelvic fracture. Adolescents with a body mass index ≥30 (OA) were compared to adolescents with a body mass index <30 (non-OA). Subgroup analyses for high-risk and low-risk MVCs were performed. Multivariable logistic regression analyses were also performed adjusting for age and sex. RESULTS: From 22,610 MVCs, 3325 (14.7%) included OAs. The observed rate of pelvic fracture was similar between all OA and non-OA MVCs (10.2% versus 9.4%, P = 0.16), as well as subanalyses of minor or high-risk MVC (both P > 0.05). OAs presenting with a pelvic fracture after high-risk MVC had a similar risk of complications, pelvic surgery, and mortality compared to non-OAs (all P > 0.05). However, OAs with a pelvic fracture after minor MVC had a higher associated risk of complications (OR 2.27, CI 1.10-4.69, P = 0.03), but a similar risk of requiring pelvic surgery, and mortality (all P > 0.05). CONCLUSIONS: This national analysis found a similar observed incidence of pelvic fractures for OAs versus non-OAs involved in an MVC, including subanalyses of minor and high-risk MVC. Furthermore, there was no difference in the associated risk of morbidity and mortality except for OAs involved in a minor MVC had a higher risk of complication.

Experimental study on the biomechanical stability of complex acetabular fractures in the quadrilateral area: application of a dynamic anterior titanium-plate screw system.

BACKGROUND AND OBJECTIVE: Complex acetabular fractures involving quadrilateral areas are more challenging to treat during surgery. To date, there has been no ideal internal fixation for these acetabular fractures. The purpose of this study was to evaluate the biomechanical stability of complex acetabular fractures using a dynamic anterior titanium-plate screw system of the quadrilateral area (DAPSQ) by simulating the standing and sitting positions of pelvic specimens. MATERIALS AND METHODS: Eight formal in-preserved cadaveric pelvises aged 30-50 years were selected as the research objects. First, one hip of the normal pelvises was randomly used as the control model (group B) for measurement, and then one hip of the pelvises was randomly selected to make the fracture model in the 8 intact pelvises as the experimental model (group A) for measurement. In group A, acetabular both-column fractures in the quadrilateral area were established, and the fractures were fixed by DAPSQ. The biomechanical testing machine was used to load (simulated physiological load) from 400 N to 700 N at a 1 mm/min speed for 30 s in the vertical direction when the specimens were measured at random in simulated standing or sitting positions in groups. The horizontal displacement and longitudinal displacement of the acetabular fractures in the quadrilateral area were measured in both the standing and sitting simulations. RESULTS: As the load increased, no dislocation or internal fixation breakage occurred during the measurements. In the standing position, the horizontal displacement of the quadrilateral area fractures in group A and group B appeared to be less than 1 mm with loads ranging from 400 N to 700 N, and there was no significant difference between group A and group B (p > 0.05). The longitudinal displacement appeared to be greater than 1 mm with a load of 700 mm in group A (700 N, 2 cases), and the difference was significant between group A and group B (p < 0.05). In the sitting position, the horizontal and longitudinal displacements of the quadrilateral areas were within 0.5 mm in group A and group B, and there was no significant difference between group A and group B (p > 0.05). CONCLUSION: For complex acetabular fractures in the quadrilateral area, DAPSQ fixation may provide early sitting stability, but it is inappropriate for patients to stand too early.

Femoral head and acetabular necrosis combined with hip subluxation in people with HIV: a case report and literature review.

INTRODUCTION: HIV is widely prevalent in all regions of the world. The use of antiretroviral drugs has dramatically reduced the mortality rate of HIV-related diseases, but correspondingly increased the incidence of chronic complications in HIV-positive people. Related studies have found that the incidence of osteonecrosis of the femoral head is higher in HIV-positive people, but the co-occurrence of femoral head necrosis, acetabular necrosis and hip joint dislocation in HIV-positive patients is rare. METHODS: We report a 50-year-old man with a 15-month history of progressively worsening right hip pain with movement restriction. According to the CT findings of the other hospital, the patient was admitted to the hospital with femoral head necrosis. After the admission, the relevant X-ray, CT and MRI examinations showed that the right femoral head collapsed and deformed, with the surrounding bone sclerosis, bone fragments, loose body of the joint, right hip subluxation, acetabular marginal osteogeny, and local microcystic degeneration. The left femoral head was in good shape, and cystic degeneration can be seen under the articular surface. The patient was finally diagnosed with femoral head necrosis and acetabular necrosis combined with hip subluxation. RESULTS: The pain of the patient was significantly relieved after the operation, and the patient was discharged from the hospital one week after the start of treatment to continue rehabilitation training. During the follow-up one month after the operation, the self-reported pain disappeared completely, and the limitation of activity was significantly improved.

Combined anatomical reduction plate for quadrilateral acetabular fractures via a posterior approach: an anatomical-morphological study.

OBJECTIVE: To digitally measure the fixation trajectory of anatomical plates used in the combined reduction of quadrilateral acetabular fractures via the posterior approach, and to develop anatomical plates that align with the characteristics of the pelvis in the Chinese population. METHODS: Pelvic computed tomography (CT) data from 102 adult patients were collected at the Affiliated Hospital of Zunyi Medical University. This group included 51 males and 51 females, aged between 20 and 60 years. Using Mimics software (version 21.0), a three-dimensional model of each pelvic data point was reconstructed. The fixation path for the combined reset anatomical steel plate was drawn, where the curves on the fixation path were approximated as arcs. The radius of curvature and length of these curves were measured, and an anatomical steel plate was designed to best fit the pelvic structure. RESULTS: The combined anatomical reduction plate fixation system for quadrilateral acetabular fractures using a posterior approach consisted of two parts: a locking plate and a reduction plate. The posterior wall region (r2), ischial region (r3), quadrilateral region (r4), and bending region (r5), and the total length of the reduction plate were significantly smaller in females (P < 0.05). Similarly, the posterior wall region (R3), distal posterior wall region (R4), and the total length of the locking plate were significantly smaller in females (P < 0.05). Additionally, the anterior superior iliac spine side (r1) and the total length of the T-shaped auxiliary plate were significantly smaller in females (P < 0.05). The bending angle (< A) was also significantly smaller in females (P < 0.05). CONCLUSIONS: The pelvic surface structure is irregular and varies greatly among individuals.Compared to the traditional steel plate, The combined reduction anatomical plate designed in this study demonstrated high precision and improved conformity to the anatomical structure of the pelvis.

Does the utilization of fluoroscopy affect the accuracy of prosthesis position in patients undergoing hip replacement surgery via the direct anterior approach compared to the posterolateral approach for an experienced surgeon? A single-center retrospective study.

BACKGROUND: The direct anterior approach (DAA) for total hip arthroplasty (THA) has gained popularity due to perceived advantages in achieving better early outcomes. However, the theoretical benefits such as precise implant positioning and accurate leg length restoration are still inconsistent. In this study, we compared implant position and leg length discrepancy (LLD) of the DAA and posterolateral approach (PLA) conducted by a single surgeon who had mastered both approaches. METHODS: This study retrospectively reviewed the medical records and radiographic images of 244 patients who underwent THA between 2012 and 2021 by a single experienced surgeon using either the DAA (n = 120) or PLA (n = 124). Postoperative pelvic anteroposterior radiographs at 6 months follow-up were used to assess acetabular component inclination and anteversion, as well as LLD. Mann-Whitney U tests and Chi-squared test were performed to compare outcomes between the two approaches. RESULTS: No significant differences were observed in patient demographics between the two groups. The DAA group demonstrated significantly lower postoperative LLD (0.00 mm) compared to the PLA group (5.00 mm, p < 0.0001). No significant difference was observed in the Lewinnek zone for cup anteversion and inclination angles between the two groups. CONCLUSIONS: For experienced surgeons in other approaches, our findings suggest transferring to the DAA may not substantially improve cup positioning, but it might slightly enhance limb length measurement. For surgeons already proficient in other approaches and deciding to maintain those approaches, their primary concern for optimal THA outcome should be striving for leg length equivalence.

Surgeon handedness affects the acetabular cup positioning during primary total hip arthroplasty regardless of the surgical approach. a systematic review and metanalysis.

PURPOSE: The aim was to investigate the effect of surgeon handedness on acetabular cup positioning, functional outcomes, and dislocation incidence during primary THA. METHODS: A systematic review was conducted according to the PRISMA guidelines. Studies published in English were searched in three databases (PubMed, Embase, and Scopus). A dominant side is a right-handed (RHD) or left-handed (LHD) surgeon who operates on the right or left hip, respectively. The opposite is considered to be the non-dominant side. We used odds ratios for dichotomous data and mean differences for continuous data, with 95% confidence intervals for quantitative data synthesis. Heterogeneity was assessed using the I² test, with outcomes graphically represented in a forest plot and a p-value of < 0.05 considered statistically significant; analyses were performed using Review Manager 5.4 (RevMan 5.4.1). >. RESULT: Four observational studies were included out of 98 articles. Ten experienced surgeons participated (8 RHD and 2 LHD) and operated on 822 patients (1484 hips), divided equally between dominant and non-dominant sides, and the posterolateral approach was utilized in 80.9% of THAs. RHD surgeons operated on 1404 (94.6%) THAs. The pooled synthesis for inclination indicated no significant difference between either side [MD: 0.10 (95% CI -2.10 to 2.30, P = 0.93, I² = 91%)]. While the difference was significant for anteversion [MD: -2.37 (95% CI -3.82 to -0.93, P = 0.001, I² = 31%)]. The functional outcome was better on the dominant side [MD: 1.44 (95% CI 0.41 to 2.48, P = 0.006, I² = 0%)], and the dislocation incidence was significantly higher on the non-dominant side [OR: 0.45 (95% CI 0.25 to 0.81, P = 0.008, I² = 0%)]. CONCLUSION: Surgeon handedness and whether operating on the dominant or non-dominant side could affect the acetabular cup positioning and outcomes during primary THAs, even in the hands of high-volume surgeons.

Bispherical metal augment improved biomechanical stability in severe acetabular deficiency reconstruction: a comparative finite element analysis.

BACKGROUND: This study used finite element analysis (FEA) to compare the biomechanical stability of bispherical metal augment (BA) and wedge-shaped trabecular-metal augment (TA) in different acetabular defect reconstruction models, thereby explaining the application value of this novel bispherical augment in complex hip revision. METHODS: Three different acetabular defect pelvis models originating from three representative patients with different types of severe acetabular defects (Paprosky IIC, IIIA, and IIIB) were constructed and reconstruction with BA and TA technique was simulated. Based on the FEA models, the displacement of reconstruction implants, relative displacement of bone implants, and hemi-pelvic von Mises stress were investigated under static loads. RESULTS: BA acquired smaller reconstruction system displacement, less relative displacement of bone implants, and lower pelvic von Mises stress than TA in all Paprosky IIC, IIIA, and IIIB defect reconstructions. CONCLUSION: The FEA results show that BA could acquire favourable biomechanical stability in severe acetabular defect reconstruction. This technique is a reliable method in complex hip revision.

Influence of hip prosthesis position on postoperative gait in symptomatic hip osteoarthritis secondary to hip dysplasia patients after primary total hip arthroplasty: a short-term follow-up study.

BACKGROUND: The aim of this study was to analyze the influence of the positioning of the components of total hip arthroplasty (THA) evaluated by the acetabular anteversion (AA) and femoral anteversion (FA) angle on postoperative gait in patients with symptomatic hip osteoarthritis secondary to hip dysplasia undergoing THA. METHODS: Between May 2023 and May 2024, patients with symptomatic hip osteoarthritis secondary to hip dysplasia (Crowe Type I and IV) who underwent THA were enrolled in the study. The AA angle and FA angle were measured by computer tomography (CT). Gait data were determined by using the Dynamic Right Gait & Posture analysis system. The relationship between FA, AA and gait data was analyzed by Pearson correlation test, subgroup Pearson correlation test, multiple linear regression. RESULTS: A total of 40 patients (45hips) were included in the study. Compared with preoperative, the patient's postoperative foot progression angle, foot contact angle, plantarflexion velocity, swing foot speed, gait velocity, cadence, stride length were significantly improved. Preoperative FA is significantly different from postoperative FA (P < 0.05), while the difference between preoperative and postoperative AA is not significant. BMI, Crowe Type, AA were related to change of cadence. The less the postoperative AA of patients, and the more the cadence in the postoperative gait of patients. CONCLUSION: Our study showed that THA could improve the gait function of patients with symptomatic hip osteoarthritis secondary to hip dysplasia. Adjusting AA lower could obtain a much more postoperative cadence.

Total hip arthroplasty with porous tantalum trabecular metal pads in patients with Crowe IV developmental dysplasia of the hip: a midterm followup study.

PURPOSE: Crowe IV developmental dysplasia of the hip (DDH) is a catastrophic hip disease. Moreover, obtaining ideal clinical efficacy in conventional total hip arthroplasty (THA) is often difficult. In this study, we aimed to assess the mid-term clinical results of THA with porous tantalum trabecular metal (TM) pads for acetabular reconstruction in the treatment of Crowe IV DDH. METHODS: A cohort of 28 patients (32 hips) diagnosed with Crowe type IV DDH who underwent acetabular reconstruction during THA using TM pads with scheduled follow-up between 2011 and 2018, were included in this study. Eight cases were men and 24 were women, with a mean age of 48.4 years (range, 36-72 years) and a mean follow-up was 74.3 months (range, 42-132 months). All patients underwent acetabular reconstruction using TM pads and total hip replacement with subtrochanteric osteotomy. RESULTS: At the final follow-up, 28 hips (87.5%) demonstrated mild or no postoperative limping. The Harris Hip Score improved from 58.4 ± 10.6 preoperatively to 85.6 ± 8.9. The mean pain, stiffness, and function scores on the Western Ontario and McMaster University Osteoarthritis index were 86.5 ± 10.2, 87.3 ± 12.4 and 85.4 ± 11.6 respectively. The mean score of patient satisfaction was 90.4 ± 7.6. Additionally, the SF-12 physical summary score was 41.8 ± 5.6 and the SF-12 mental summary score was 51.6 ± 5.4. TM construct survivorship due to all-cause failure was 90.6% at 5 years with 3 hips at risk, 87.5% at 10 years with 4 hips at risk. The survivorship due to failure from aseptic loosening was 96.9% at 5 years with 1hips at risk and 93.75% at 10 years with 2 hips at risk. CONCLUSION: This study demonstrated satisfactory mid-term clinical and radiological results with the application of TM pads for acetabular reconstruction combined with THA in patients with Crowe IV DDH. TRIAL REGISTRATION NUMBER: ChiCTR1800014526, Date: 18/01/2018.

A retrospective study describing the acetabular consequences of Legg- Calve-Perthes disease.

PURPOSE: Legg Calve Perthes disease (LCPD) is a paediatric hip disorder caused by ischemia of the femoral epiphysis, causing femoral head deformity when untreated. This study aims to determine if previously validated pelvic obliquity radiographic parameters, used for assessing acetabular retroversion in developmental dysplasia of the hip, are applicable to patients with LCPD and its prognostic value. METHOD: A retrospective study of patients with Legg Calve Perthes disease was carried out, analysing 4 pelvic parameters: Ilioischial Angle, Obturator Index, Sharp's Angle and Acetabular Depth-Width Ratio (ADR). The differences between healthy and affected hips were studied, and subsequently, it was assessed whether these parameters have prognostic value in the disease outcome. RESULTS: Statistically significant differences have been obtained in the ilioischial angle, obturator index and ADR, between the affected and healthy hip. However, only the Acetabular Depth-Width Ratio showed predictive value for the disease outcome. CONCLUSION: Although this study revealed differences in pelvic parameters between healthy and diseased hips, with only the ADR showing statistical significance in the disease's evolution and prognosis, further studies with larger sample sizes are necessary.

The Current Incidence and Future Projection of Acetabular Fractures in Korea.

BACKGROUND: As one of the most challenging fractures to orthopedic surgeons, acetabular fractures show a wide range of incidence among countries and regions with even more variance in the treatment modalities. In this study, we aimed to investigate the epidemiology of acetabular fractures, and to compare the rate of subsequent total hip arthroplasty (THA) between nonoperative and operative treatments in South Korea using a medical claims database. METHODS: This was a retrospective study using the Korean Health Insurance Review and Assessment database. Patients admitted for acetabular fractures from January 2007 to December 2018 were identified using International Classification of Diseases-10 codes. Kaplan-Meier survival analysis was used to compare the cumulative incidence of THA between two groups. We also evaluated the survivorship of operative group according to the type of institutions. RESULTS: The incidence rate of acetabular fractures increased by 28% between 2007 and 2018. Acetabular fractures were more common in men (62%) than women (38%), and most common in the patients older than 80 years. The number of acetabular fractures was estimated to increase 1.7-fold in 2030 compared to 2018. Operative treatment accounted for 16% of cases, and nonoperative treatment for 84%. The incidence of subsequent THA was higher in the operative treatment group than in the nonoperative group (P < 0.001). The higher rate in the operative treatment group is probably related with the severity of the fracture type. The rate of subsequent THA was higher in patients who initially treated in general hospitals compared with those who were initially treated in tertiary hospitals. CONCLUSION: The incidence of acetabular fractures is increasing in South Korea, in line with global trends. Most acetabular fractures are treated conservatively, and those who receive surgery are more likely to require a subsequent THA. Patients who were operated in general hospitals had highest possibility of subsequent THA after acetabular fractures.

Editorial Commentary: Arthroscopic Treatment of Mild Hip Dysplasia Can Result in Excellent Outcome and Avoid More Invasive Periacetabular Osteotomy.

Several mechanisms either support or decrease stability of the hip joint. Primary stability of the hip comes from bony coverage of the femoral head, influenced by acetabular version and femoral antetorsion. In addition, soft tissue structures such as the acetabular labrum, the ligamentum teres, and the hip capsule play a significant role in maintaining joint stability. Untreated hip instability may lead to pathological force transmission between the acetabular socket and femoral head, and subluxation resulting in osteoarthritis. Historically, pelvic and/or femoral osteotomies have been performed to increase hip stability and prevent joint degeneration. However, osteotomies do not address soft tissue instability or lesions of intra-articular structures, which could explain symptoms following bony correction. Furthermore, the rate of combined pathologies resulting in hip instability and femoroacetabular impingement syndrome (FAIS) is high. Modern hip arthroscopy enables reconstruction and stabilization of soft tissue structures and the correction of bony pathologies caused by FAIS. Minimally invasive procedures can help avoid overtreatment and unnecessary risks associated with more invasive osteotomies. However, in cases of ongoing symptoms after arthroscopic treatment for mild instability, or for patients with severe dysplasia, concomitant PAO and arthroscopy can combine bony correction of a PAO with intra-articular therapies of hip arthroscopy.

Arthroscopic Chondral Nail Fixation for Treating Acetabular Cartilage Delamination Results in Improved Pain Relief at Minimum 2-year Follow-up in Patients with Femoroacetabular Impingement Syndrome: A Propensity-Matched Study.

PURPOSE: To investigate the clinical outcomes following arthroscopic chondral nail fixation for acetabular cartilage delamination (ACD) in patients with femoroacetabular impingement syndrome (FAIS), and the presentation of ACD on MRI at follow-up. METHODS: A retrospective review was performed between March 2021 and March 2022 at our institute. Patients undergoing primary hip arthroscopy for FAIS and diagnosed with ACD intraoperatively were included. Exclusion criteria were incomplete data or loss of minimum 2-year follow-up, and concomitant hip conditions including hip osteoarthritis with a Tönnis grade > 1, avascular necrosis, Legg-Calvé-Perthes disease, osteoid osteoma, synovial chondromatosis, pigmented villonodular synovitis, and developmental dysplasia of the hip (DDH). Patients who underwent chondral nail fixation were matched 1:1 with a control cohort of patients who only underwent simple debridement. Preoperative and minimum 2-year postoperative patient-reported outcome (PRO) scores including Visual Analog pain Scale (VAS), modified Harris Hip Score (mHHS), and percentage of achieving minimal clinically important difference (MCID) and patient acceptable symptom state (PASS) were collected and compared. MRI was performed preoperatively and at final follow-up to assess ACD. RESULTS: Fifty-eight patients were included in the study (29 patients in each group). Both groups demonstrated improved VAS and mHHS following surgery (all with P < .05). The chondral nail group demonstrated better postoperative VAS (P = .022) compared to the control group, while the postoperative mHHS was comparable between the two groups (P = .852). No significant difference was found in the achievement of MCID between the two groups (all with P > .05). More patients in the chondral nail group achieved PASS of VAS compared to the control group (75.9% vs 48.3%, P = .030). No patient underwent revision surgery or conversion to total hip arthroplasty (THA). The chondral nail group demonstrated significantly higher rate of ACD healing on MRI compared to the control group (P < .001). CONCLUSION: Patients undergoing arthroscopic chondral nail fixation for treating ACD demonstrated significant pain relief, more achievement of PASS of VAS, and higher rate of ACD healing on MRI compared to those undergoing simple debridement. LEVEL OF EVIDENCE: Level III; retrospective cohort study.

Increased combined anteversion is associated with larger posterior acetabular rim ossification in patients with femoroacetabular impingement syndrome.

PURPOSE: (1) To determine the prevalence, magnitude and distribution pattern of acetabular rim ossification in patients with femoroacetabular impingement syndrome (FAIS) and (2) to determine the association between acetabular rim ossification and rotational abnormalities of the hip. METHODS: Patients underwent hip arthroscopic surgery for FAIS at our institute between January 2021 and May 2022 were retrospectively reviewed. Patients were included if preoperative computed tomography (CT) images of the operated hip and ipsilateral distal femur were available for the measurement of femoral and acetabular anteversion. The presence and size of acetabular rim ossification were evaluated on coronal CT sections for the superior half of the acetabulum on each clockface location. The associations between acetabular rim ossification and radiographic parameters of hip rotational morphology were examined. RESULTS: A total of 214 hips were included. Acetabular rim ossification was found in 167 hips (78%) and the most common locations were 10 and 11 o'clock. Patients presenting with acetabular rim ossification had a mean size of 4.6 ± 1.6 mm. It was the largest at 9 o'clock position (4.9 ± 2.2 mm), with a decreasing trend in size from posterior to anterior. Logistics regression analysis found age was associated with the occurrence of posterior ossification (p = 0.002). Linear regression analysis found age (p = 0.049) and male sex (p < 0.001) were significantly correlated with the size of ossification. Patients with increased cranial combined anteversion had larger posterior ossification than patients with normal and decreased cranial combined anteversion (4.2 ± 2.9 vs. 3.1 ± 2.5 mm, p = 0.016; 4.2 ± 2.9 vs. 2.5 ± 2.4 mm, p = 0.005). CONCLUSION: Increased combined anteversion is associated with greater posterior acetabular rim ossification. The presence and size of acetabular rim ossification are positively associated with older age and male sex. LEVEL OF EVIDENCE: Level III.

Surgical treatment outcomes of acetabular posterior wall and posterior column fractures using 3D printing technology and individualized custom-made metal plates: a retrospective study.

BACKGROUND: Fractures involving the posterior acetabulum with its rich vascular and neural supply present challenges in trauma orthopedics. This study evaluates the effectiveness of 3D printing technology with the use of custom-made metal plates in the treatment of posterior wall and column acetabular fractures. METHODS: A retrospective analysis included 31 patients undergoing surgical fixation for posterior wall and column fractures of the acetabulum (16 in the 3D printing group, utilizing 3D printing for a 1:1 pelvic model and custom-made plates based on preoperative simulation; 15 in the traditional group, using conventional methods). Surgical and instrument operation times, intraoperative fluoroscopy frequency, intraoperative blood loss, fracture reduction quality, fracture healing time, preoperative and 12-month postoperative pain scores (Numeric Rating Scale, NRS), hip joint function at 6 and 12 months (Harris scores), and complications were compared. RESULTS: The surgical and instrument operation times were significantly shorter in the 3D printing group (p < 0.001). The 3D printing group exhibited significantly lower intraoperative fluoroscopy frequency and blood loss (p = 0.001 and p < 0.001, respectively). No significant differences were observed between the two groups in terms of fracture reduction quality, fracture healing time, preoperative pain scores (NRS scores), and 6-month hip joint function (Harris scores) (p > 0.05). However, at 12 months, hip joint function and pain scores were significantly better in the 3D printing group (p < 0.05). Although the incidence of complications was lower in the 3D printing group (18.8% vs. 33.3%), the difference did not reach statistical significance (p = 0.433). CONCLUSION: Combining 3D printing with individualized custom-made metal plates for acetabular posterior wall and column fractures reduces surgery and instrument time, minimizes intraoperative procedures and blood loss, enhancing long-term hip joint function recovery. CLINICAL TRIAL REGISTRATION: 12/04/2023;Trial Registration No. ChiCTR2300070438; http://www.chictr.org.cn .

Traumatic bilateral acetabular fracture secondary to high-energy trauma in healthy adults.

BACKGROUND: Bilateral acetabular fracture is a very rare presentation among the trauma patients, as the pattern and the degree of the forces required to fracture both acetabula is very unique. The primary purpose of this study is to report a series of adult patients presenting with post-traumatic bilateral acetabular fracture without any history of pathological or metabolic bone disease. PATIENTS AND METHODS: In this retrospective study, 18 cases of traumatic bilateral acetabular fracture were included. There was predominance of both column (four patients on left and six on right) followed by anterior column (two patients left and four on right) and posterior wall (three patients left and right). They were treated surgically through open reduction and internal fixation. All cases were followed up for at least 13 months. Matta's criteria were used for radiological evaluation on plain radiographs. Functional outcome was evaluated using the Merle d'Aubigne and postel score at final follow-up. RESULTS: No patients were lost during the follow-up period; there was one case of surgical site infection. There were three cases of postoperative osteoarthritis, one case of heterotrophic ossification, one case of persistent sciatic nerve palsy and one case of lateral femoral cutaneous nerve palsy. The radiological evaluation according to Matta's criteria revealed anatomic reduction in 12 patients, imperfect reduction in three patients while other three patients had poor reduction. According to modified Merle d'Aubigne and Postel score, 10 cases were rated as excellent, five cases as good and three cases presented fair (one case) to poor (two cases) results. CONCLUSION: We report an unusual case series of bilateral acetabular fracture successfully managed surgically with good clinical outcome. With the increasing incidence of route traffic accidents, such cases would probably be recurrent in the upcoming years.

Aseptic Acetabular Revisions ≤90 Days, 91 Days to 2 Years, and >2 Years After Total Hip Arthroplasty: Comparing Etiologies, Complications, and Postoperative Outcomes.

BACKGROUND: Isolated acetabular component revision is an effective treatment for revision total hip arthroplasty patients who have well-fixed femoral implants. We aimed to evaluate the modes of acetabular failure following primary total hip arthroplasty and to identify factors associated with increased morbidities and postoperative outcomes. METHODS: We conducted a retrospective analysis and identified 318 isolated aseptic acetabular revisions. We separated patients by ≤90 days, 91 days to 2 years, and >2 years for acetabular revisions and compared demographics, reasons for revision, 90-day readmissions, rerevisions, and postrevision infections. Revisions ≤90 days, 91 days to 2 years, and >2 years accounted for 10.7, 19.2, and 70.1% of revisions, respectively. Revisions ≤90 days, 91 days to 2 years, and >2 years had their primary total hip arthroplasty at a mean age of 66, 63, and 55 years (P < .001), respectively. RESULTS: Revisions within 90 days were mainly indicated for dislocation/instability (58.8%) or periprosthetic fracture (23.5%) while revisions over 2 years were indicated for polyethylene wear/osteolysis (37.2%). Patients with revisions past 90 days were more likely to require rerevision compared to patients with revisions within 90 days (P < .001). There were no differences in readmissions (P = .28) or infection rates (P = .37). CONCLUSIONS: Acetabular revisions within 90 days were more commonly indicated for instability and periprosthetic fracture, while those over 2 years were indicated for polyethylene wear. Revisions past 90 days were more likely to require subsequent rerevisions without increased 90-day readmissions or infections. LEVEL III EVIDENCE: Retrospective cohort study.

Acetabular Augments Used in Revision Hip Arthroplasty: Minimum 10-year Follow-Up of Implant Survivorships, Functional Scores, and Radiographic Outcomes.

BACKGROUND: Acetabular bone loss is a major challenge in the setting of revision total hip arthroplasty (THA). Porous tantalum augments have emerged as a viable solution to acetabular bone loss in revision THA. The purpose of this study was to evaluate the survivorship, clinical, and radiological outcomes of these implants. METHODS: We identified 104 augment implants from our retrospective chart review of revision THA from June 2003 to July 2013. Of these patients, 75 (72.1%) were women, the mean age at surgery was 66 years (range, 27 to 87), and the mean follow-up was 13.2 years (range, 0.25 to 18.2). Kaplan-Meier survival analysis was performed, with failure defined as revision for aseptic loosening of the acetabular reconstruction. RESULTS: There was significant improvement in the Harris Hip Score from 40.0 to 77.3 (P < 0.001) and the Oxford Hip Score from 14.9 to 36.3 (P < 0.001). Survivorship for failure due to aseptic loosening was 98.8% (95% CI [confidence interval] 96.4 to 100) at 24 months with 60 hips at risk, and 90.4% (95% CI 83.0 to 97.8) at 60 and 120 months with 38 and 18 hips at risk, respectively. The overall number of complications was 34 (32.7%). Of these complications, 21 (20.2%) required repeat revision surgery. The revision rate due to aseptic loosening of the augment, infection, dislocation, aseptic loosening of the femoral component, reconstruction failure, and heterotopic ossification was seven (6.7%), five (4.8%), four (3.8%), two (1.9%), two (1.9%), and one (0.96%), respectively. CONCLUSIONS: Treatment of acetabular defects during revision THA using porous tantalum augments provides acceptable implant survivorship and favorable clinical outcomes at mid-term (5 to 10 years) and long-term (> 10 years) follow-up.

Predicting Instability Risk Following Hemiarthroplasty for Femoral Neck Hip Fractures in Geriatric Patients.

BACKGROUND: Although a rare complication, dislocation following hemiarthroplasty (HA) for a femoral neck hip fracture is associated with increased mortality, readmission, and possible revision surgery. To date many of the specific risk factors have been difficult to demonstrate. Patient factors, surgical factors, as well as morphological factors need to be assessed. Therefore, the purpose of this study was to elucidate the risk factors for dislocation of HA following femoral neck hip fractures in the geriatric population. METHODS: This was a retrospective review of 270 patients who had hip fractures. Medical records between the years 2016 and 2022 informed binomial regression predictive models. The discriminative ability of variables in the final model and acetabular anteversion to predict dislocation was assessed with area under the curve (AUC) estimates. RESULTS: Center edge angle (odds ratio 1.23), abduction angle (odds ratio 1.17), and depth width ratio (2.96e-11) were significant predictors of dislocation (P = .003, .028, and <.001, respectively). Center edge angle and depth width ratio (<44.1 ° and .298), respectively, were cut scores for risk. Dementia had a high discriminative of ability, as did men (AUC = 0.617, 0.558, respectively). Acetabular anteversion was not predictive of dislocation (P = .259) and theorized anteversion safe zones had poor discriminative ability with AUCs of 0.510 and 0.503, respectively. CONCLUSIONS: Morphological factors related to hip dysplasia and a shallow acetabulum, which can be assessed with a radiograph alone, were found to be predictors of instability following HA in the elderly. Hemiarthroplasty implant design and manufacturer, and also acetabular version did not contribute to instability risk.