Dynamic Behaviors of Newly Deposited Atmospheric Heavy Metals in the Soil-Pak Choi System.

Dynamic behaviors of the newly deposited atmospheric heavy metals in the soil-pak choi (Brassica chinensis L.) system are investigated by a fully factorial atmospheric exposure experiment using soils exposed to 0.5-year and 1.5-year atmospheric depositions. The results showed approximately 17-87%, 19-64%, and 43-84% of the Cu, Cd, and Pb in pak choi edible parts were contributed from the new depositions, respectively. For the newly deposited metals, foliar uptake was the key pathway of shoot bioaccumulation rather than from root uptake of the deposited metals in soils, resulting in no significant soil contribution differences between pak chois growing in 0.5-year and 1.5-year exposed soils. Indeed, highly bioavailable metals in atmospheric deposition significantly increased the soil plant-bioavailable Cu, Cd, and Pb fractions; however, soil aging resulted in similar percentages of the plant-bioavailable fractions in 0.5-year and 1.5-year exposed soils, which indicated the bioavailability of metals deposited into soils rapidly decreased with aging. The soil aging process of the deposited metals was well fitted with the first-order exponential decay model, and soil organic matter and clay were the major driving factors. Our findings highlight high plant bioaccumulation rates and the rapid soil aging process of newly deposited metals during the plant growth period.

The effects of redox conditions on arsenic re-release from excavated marine sedimentary rock with naturally suppressed arsenic release.

Massive quantities of marine sedimentary rock are excavated from urban coastal areas. The excavated rock often releases arsenic with concurrent oxidation of framboidal pyrite, but the arsenic release is naturally suppressed with subsequent atmospheric exposure. The present study evaluated the re-release of arsenic from excavated rock in which arsenic release has been naturally suppressed by the atmospheric exposure in the presence of sulfate ions under various redox conditions using the biological reduction method. The atmospheric exposure and subsequent batch leaching test revealed that the amount of arsenic release that was naturally suppressed corresponded to 1.2% of the total arsenic content. The sequential extraction analysis also showed that the arsenic in the exposed rock was altered to insoluble phases. We observed a re-release of 6.0-18.2% of the total arsenic content under reductive conditions (< + 70 mV of Eh), exceeding the amount of arsenic that was naturally suppressed, even in the presence of sulfate ions. The correlation in the amount of arsenic and iron re-released demonstrates that arsenic re-release under reductive conditions is mainly regulated by the iron dissolution up to 10 mg kg-1 even in the presence of sulfate ion. Further reduction and dissolution of iron did not cause further increase in the arsenic re-release. Therefore, excavated marine sedimentary rock should be reused under redox conditions in which iron is not reduced. Otherwise, treatments such as chemical immobilization should be performed.

Insights into growth stages and genotypes in airborne Pb accumulation in Oryza sativa L. grains: Utilizing isotope fingerprinting alongside a model study.

Atmospheric exposure is an important pathway of accumulation of lead (Pb) in Oryza sativa L. grains. In this study, source contributions of soil, early atmospheric exposure, and late atmospheric exposure, along with their bioaccumulation ratios were examined both in the pot and field experiments using stable Pb isotope fingerprinting technology combined with a three-compartment accumulation model. Furthermore, genotype differences in airborne Pb accumulation among four field-grown rice cultivars were investigated using the partial least squares path model (PLS-PM) linking rice Pb accumulation to agronomic traits. The findings revealed that during the late growth period, the air-foliar-grain transfer of Pb was crucial for rice Pb accumulation. Approximately 69-82% of the Pb found in polished rice was contributed by atmospheric source, with more than 80% accumulating during the late growth stage. The air accumulation ratios of rice grains were genotype-specific and estimated to be 0.364-1.062 m3/g during the late growth. Notably, grain size exhibited the highest standardized total effects on the airborne Pb concentrations in the polished rice, followed by leaf Pb and the upward translocation efficiency of Pb. The present study indicates that mitigating the health risks associated with Pb in rice can be achieved by controlling atmospheric Pb levels during the late growth stage and choosing Japonica inbred varieties characterized by large grain size.

Impacts of atmospheric deposition on the heavy metal mobilization and bioavailability in soils amended by lime.

Atmospheric deposition is an important source of heavy metal in agricultural soils, but there is limited research on the mobility of these metals in soil and their impact on soil amendment. Here, we performed a dust incubation experiment in soils in the laboratory and a factorial transplant experiment at three field sites with a gradient of atmospheric deposition to examine the impacts of atmospherically deposited heavy metals (Cu, Cd, and Pb) on the mobility and bioavailability in soils with and without lime applications. Results showed that the atmospherically deposited heavy metals showed high mobility and were primarily presented in the soluble ionic fractions in the wet part and acid-exchangeable and reducible fractions in the dry part of atmospheric deposition. Atmospheric dust addition caused the 2p3/2 and 2p1/2 electrons of Cu atoms in uncontaminated soils to transition the 3d vacant states, resulting in similar copper absorption peaks as atmospheric particles by the observation of X-ray absorption near-edge spectroscopy (XANES). In the field, atmospheric deposition can only increase the mobile fractions in the surface soils, but not in the deeper layers. However, the deposition can increase the soluble and diffusive gradients in thin films (DGT)-measured bioavailable fractions in profile along with the soil depth. Lime applications cannot significantly reduce the mobile fractions of heavy metals in the surface soils exposed to atmospheric deposition, but significantly reduce the heavy metal concentrations in soil solutions and the DGT-measured bioavailable concentrations, particularly in the deeper layer (6-10 cm). The major implication is that atmospherically deposited heavy metals can significantly increase their bioavailable concentrations in the plough horizon of soil and constrain the effects of soil amendments on heavy metal immobilization, thereby increasing the risks of crop uptake.

Halogenated flame retardant exposure pathways in urban-adapted gulls: Are atmospheric routes underestimated?

Urban-adapted gulls can be exposed to flame retardants while foraging in landfills where elevated concentrations of polybrominated diphenyl ethers (PBDEs) and other halogenated flame retardants (HFRs) have frequently been measured in air. However, the contribution of atmospheric exposure has largely been overlooked compared to dietary exposure in birds and other wildlife. The overall objective of this study was to investigate the contribution of atmospheric exposure pathways relative to diet for PBDEs and other HFRs in ring-billed gulls (Larus delawarensis) nesting in the densely populated Montreal area (QC, Canada). Miniature passive air samplers (PASs) were deployed on the back of wild-caught ring-billed gulls for ten days. Concentrations of PBDEs and other HFRs were determined in PASs carried by ring-billed gulls as well as their lungs, stomach content, liver, preen oil, and onto the surface of their feathers. We evaluated the atmospheric and dietary exposure routes for the most abundant HFRs in samples using a structural equation model implemented in a Bayesian framework. Results indicated that lung concentrations of BDE-28 increased with its levels in air determined using bird-borne PASs. No association was found between BDE-28 concentrations in lungs and liver, whereas BDE-209 concentrations in liver increased with those in lungs. Moreover, BDE-28 and -47 concentrations in liver increased with those on feather surface, while liver BDE-47 concentrations were also positively related with those in stomach content. These findings suggested that, in addition to dietary exposure, atmospheric exposure pathways through inhalation and co-ingestion during feather maintenance (preening) significantly contribute to the accumulation of PBDEs in liver of ring-billed gulls. Atmospheric exposure to HFRs should therefore be considered in future landfill-foraging wildlife species as a potential exposure route compared to the traditional dietary exposure pathway.

Impact of landfill characteristics on the atmospheric exposure to halogenated flame retardants in gulls.

Large amounts of consumer products containing halogenated flame retardants (HFRs) are disposed of annually in landfills, which may lead to significant releases of these semi-volatile contaminants into the environment. During their foraging activities in landfills, gulls can be exposed to elevated levels of HFRs in air. Ring-billed gulls (Larus delawarensis) breeding in the densely populated Montreal area (QC, Canada) are significantly exposed to air levels of polybrominated diphenyl ethers (PBDEs) in or in the vicinity of landfills. However, no information is currently available on the specific characteristics of these landfills that can modulate the atmospheric exposure of ring-billed gulls to HFRs. The objective of this study was to investigate how atmospheric exposure in ring-billed gulls to PBDEs and other HFRs is influenced by selected landfill characteristics (i.e., daily cover materials, waste types and tonnage). Miniature passive air samplers (PASs) combined with GPS dataloggers were deployed for ten days during six years on the back of wild-caught ring-billed gulls breeding in the Montreal area. Atmospheric levels of several PBDEs and other HFRs determined in PASs were found to increase with the presence probability of gulls in the two largest landfills using automotive shredder residues as daily cover material. Weather variables including relative humidity and wind speed had a weak influence on atmospheric levels of HFRs in the bird-borne PASs. Our results suggest that automotive shredder residues represent a significant emission source of HFRs into the air of landfills, thus influencing atmospheric exposure of gulls and other birds foraging in these sites.

Advancing application of satellite remote sensing technologies for linking atmospheric and built environment to health.

Background: The intricate interplay between human well-being and the surrounding environment underscores contemporary discourse. Within this paradigm, comprehensive environmental monitoring holds the key to unraveling the intricate connections linking population health to environmental exposures. The advent of satellite remote sensing monitoring (SRSM) has revolutionized traditional monitoring constraints, particularly limited spatial coverage and resolution. This innovation finds profound utility in quantifying land covers and air pollution data, casting new light on epidemiological and geographical investigations. This dynamic application reveals the intricate web connecting public health, environmental pollution, and the built environment. Objective: This comprehensive review navigates the evolving trajectory of SRSM technology, casting light on its role in addressing environmental and geographic health issues. The discussion hones in on how SRSM has recently magnified our understanding of the relationship between air pollutant exposure and population health. Additionally, this discourse delves into public health challenges stemming from shifts in urban morphology. Methods: Utilizing the strategic keywords "SRSM," "air pollutant health risk," and "built environment," an exhaustive search unfolded across prestigious databases including the China National Knowledge Network (CNKI), PubMed and Web of Science. The Citespace tool further unveiled interconnections among resultant articles and research trends. Results: Synthesizing insights from a myriad of articles spanning 1988 to 2023, our findings unveil how SRMS bridges gaps in ground-based monitoring through continuous spatial observations, empowering global air quality surveillance. High-resolution SRSM advances data precision, capturing multiple built environment impact factors. Its application to epidemiological health exposure holds promise as a pioneering tool for contemporary health research. Conclusion: This review underscores SRSM's pivotal role in enriching geographic health studies, particularly in atmospheric pollution domains. The study illuminates how SRSM overcomes spatial resolution and data loss hurdles, enriching environmental monitoring tools and datasets. The path forward envisions the integration of cutting-edge remote sensing technologies, novel explorations of urban-public health associations, and an enriched assessment of built environment characteristics on public well-being.

Natural Deterioration Processes of Salix psammophila Sand Barriers in Atmospheric Exposure Section.

The atmospheric conditions of desert environments are important for the protection of Salix psammophila Sand Barrier, and these conditions can affect and change the structure and performance of the sand barrier, causing them to lose their wind proofing and sand fixing benefits. In this study, we have first examined the key environmental factors that affect the exposure of S. psammophila sand barrier. Then, we assessed how key factors in the desert atmospheric environment affect structural aging and performance. The relative crystallinity and chemical composition changes in the sand barrier were measured by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS), and the main degradation factors and processes were discussed. The results showed that the degradation degree of the exposed S. psammophila sand barrier was mainly affected by moisture and ultraviolet radiation. Lignin was the main component and the source of photodegradation and photodiscoloration observed in the sand barrier. However, other polysaccharides, such as cellulose and hemicellulose, were less affected by photodegradation. The stress generated by alternating desorption-absorption was the main cause of the expansion and contraction, deformation, cracking, and warping observed in S. psammophila sand barrier. We also found a series of irreversible changes and losses that occurred, which affected the natural material properties of S. psammophila sand barrier exposed to atmospheric conditions for several years. Exposure times between 5 and 7 years were the most important turning point in time for determining the deterioration of the S. psammophila sand barrier. Our results highlighted the importance of the interactions between atmospheric factors and the exposed atmospheric sections of the S. psammophila sand barrier from the perspective of environmental effects. However, the exact mechanisms of the sand barrier deterioration still need further investigation. Nevertheless, our overall findings advanced the current understanding of the environmental effects of S. psammophila sand barrier for ecological restoration and desertification reversal, especially in stressful desert environments.

Gulls foraging in landfills: Does atmospheric exposure to halogenated flame retardants result in bioaccumulation?

Several bird species have adapted to foraging in landfills, although these sites are known to represent significant sources of emissions of toxic semi-volatile chemicals including the halogenated flame retardants (HFRs) (e.g., polybrominated diphenyl ethers (PBDEs) and emerging compounds). The objective of this study was to investigate the association between atmospheric exposure to PBDEs and selected emerging HFRs and their bioaccumulation in landfill-foraging birds. We determined HFR concentrations in liver of 58 GPS-tagged ring-billed gulls (Larus delawarensis) breeding in a colony near Montreal (Canada) as well as their atmospheric exposure determined using a miniature bird-borne passive air sampler. PBDE mixtures were the most abundant HFRs determined in passive air samplers (daily exposure rates of ∑9PentaBDE: 47.4 ± 6.5 pg/day; DecaBDE: 36.0 ± 6.3 pg/day, and ∑3OctaBDE: 3.4 ± 0.5 pg/day) and liver (∑9PentaBDE: 68.1 ± 8.9 ng/g ww; DecaBDE: 52.3 ± 8.1 ng/g ww, and ∑3OctaBDE: 12.8 ± 2.1 ng/g ww), and their concentrations increased with the presence probability of gulls in landfills. We found a spatial relationship between the local sources of atmospheric exposure to PBDEs and the sites associated with greatest PBDE concentrations in liver. Specifically, the atmospheric exposure index was correlated with the bioaccumulation index (Pearson r for ∑9PentaBDE: r = 0.63, p < 0.001; DecaBDE: r = 0.66, p < 0.001, and ∑3OctaBDE: r = 0.42, p < 0.001). However, we found no correlation at the individual level between daily exposure rates of HFRs in passive air samplers and their liver concentrations. This suggests that complex exposure pathways combined with toxicokinetic factors shaped HFR profiles in gull liver, potentially confounding the relationships with atmospheric exposure.

Transwell Insert-Embedded Microfluidic Devices for Time-Lapse Monitoring of Alveolar Epithelium Barrier Function under Various Stimulations.

This paper reports a transwell insert-embedded microfluidic device capable of culturing cells at an air-liquid interface (ALI), mimicking the in vivo alveolar epithelium microenvironment. Integration of a commercially available transwell insert makes the device fabrication straightforward and eliminates the tedious device assembly processes. The transwell insert can later be detached from the device for high-resolution imaging of the cells. In the experiments, the cells showing type-I pneumocyte markers are exploited to construct an in vitro alveolar epithelium model, and four culture conditions including conventional liquid/liquid culture (LLC) and air-liquid interface (ALI) cell culture in normal growth medium, and ALI cell culture with inflammatory cytokine (TNF-α) stimulation and ethanol vapor exposure are applied to investigate their effects on the alveolar epithelium barrier function. The barrier permeability is time-lapse monitored using trans-epithelial electrical resistance (TEER) measurement and immunofluorescence staining of the tight junction protein (ZO-1). The results demonstrate the functionalities of the device, and further show the applications and advantages of the constructed in vitro cell models for the lung studies.

Analysis of Environmental Factors Affecting the Atmospheric Corrosion Rate of Low-Alloy Steel Using Random Forest-Based Models.

As one of the factors (e.g., material properties, surface quality, etc.) influencing the corrosion processes, researchers have always been exploring the role of environmental factors to understand the mechanism of atmospheric corrosion. This study proposes a random forest algorithm-based modeling method that successfully maps both the steel's chemical composition and environmental factors to the corrosion rate of low-alloy steel under the corresponding environmental conditions. Using the random forest models based on the corrosion data of three different atmospheric environments, the environmental factors were proved to have different importance sequence in determining the environmental corrosivity of open and sheltered exposure test conditions. For each exposure test site, the importance of environmental features to the corrosion rate is also ranked and analyzed. Additionally, the feasibility of the random forest model to predict the corrosion rate of steel samples in the new environment is also demonstrated. The volume and representativeness of the corrosion data in the training data are considered to be the critical factors in determining its prediction performance. The above results prove that machine learning provides a useful tool for the analysis of atmospheric corrosion mechanisms and the evaluation of corrosion resistance.

Arsenic release from marine sedimentary rock after excavation from urbanized coastal areas: Oxidation of framboidal pyrite and subsequent natural suppression of arsenic release.

Massive quantities of marine sedimentary rock are excavated from urban coastal areas for making underground spaces available for infrastructure projects globally. The excavated rock often contains low levels of framboidal pyrite, which can release arsenic (As) to levels that exceed environmental standards. In the present study, changes in As release and its phases were investigated during oxidation of framboidal pyrite in marine sedimentary rock following exposure to the atmosphere. Batch leaching tests showed that As release increases with atmospheric exposures over 14 days, and then decreases. In unexposed rock, 79% of As released was As(III), but the proportion of As(V) increased with atmospheric exposure times. The ratio of readily soluble As fractions (fraction 1 + 2) following sequential extraction also increased during the first 14 days of atmospheric exposures, and then decreased. In comparisons of As phases before and after leaching tests of atmosphere-exposed rocks, ratios of readily soluble As fractions decreased over 90-day atmospheric exposures. Amounts of amorphous iron also increased with the duration of atmospheric exposures. However, X-ray diffraction and scanning electron microscope analyses showed that framboidal pyrite morphology was maintained after 90 days of atmospheric exposure. Herein, we identify factors that control As release and its phases from marine sedimentary rock after excavation. The results will inform future studies that will indicate when and how to evaluate the risks of As release from marine sedimentary rocks containing framboidal pyrite.

Evaluation of historical atmospheric pollution in an industrial area by dendrochemical approaches.

We conducted a dendrochemical study in order to evaluate the exposure of territories and populations to different types of pollutants and to characterise the history of pollution in one of the most intensely industrialised areas of Europe: the industrial port zone of Fos, also heavily urbanised. To perform the study, two tree species have been selected, Pinus halepensis and Populus nigra, on a rural plot located roughly 20 km away from the industrial harbour, an urban plot located in the city of Fos-sur-Mer and an industrial plot. Our study indicated that poplar was a more relevant model for the dendrochemical studies, exhibiting a higher bioaccumulation capacity than pine except for Hg, Sb and Mn. Moreover, thanks to this work, we observed significant exposure of the trees in the urban and industrial areas to As, Cd, Co, Cu, Mo, Sb, Zn, Al, Ca, and Mg, highlighting the exposure of the territory and populations living in the vicinity of the industrial harbour. The temporal variability of the concentrations measured in the tree rings corresponds to the increasing industrialisation of the territory as well as to the evolution of the industrial processes. Thus, this project highlighted the exposure of the Gulf of Fos to atmospheric emissions (industrial, road and urban) of the industrial harbour as well as the changes over time. It also pointed out the relevance of using dendrochemistry to measure atmospheric exposure of metals and metalloids and its temporal variability.

Modeling atmospheric volatile organic compound concentrations resulting from a deepwater oil well blowout - Mitigation by subsea dispersant injection.

The atmospheric concentrations of volatile organic compounds (VOCs) generated by surface slicks during an oil spill have not been extensively studied. We modeled oil transport and fate, air emissions, and atmospheric dispersion of VOCs from a hypothetical deepwater well blowout in De Soto Canyon of the Gulf of Mexico assuming no intervention and use of SubSea Dispersant Injection (SSDI) at the source during three week-long periods representing different atmospheric mixing conditions. Spatially varying time histories of atmospheric VOCs within ~2 km from the release site were estimated. As compared to the no-intervention case, SSDI dispersed the discharged oil over a larger water volume at depth and enhanced VOC dissolution and biodegradation, thereby reducing both the total mass of VOCs released to the atmosphere and the concentration of VOCs within 2 km from the release site. Atmospheric conditions also influenced the VOC concentrations, although to a lesser degree than SSDI.

A miniature bird-borne passive air sampler for monitoring halogenated flame retardants.

Birds have been used intensively as biomonitors of halogenated flame retardants (HFRs), and several studies have reported elevated tissue concentrations and inter-individual variability for these contaminants. While diet is known to be an important exposure pathway for HFRs in birds, it has been suggested that exposure through air may represent an underestimated source of HFRs for certain species. However, a method was not available for measuring the atmospheric exposure of individual birds to HFRs or other semi-volatile contaminants. The goal of this study was to develop a bird-borne passive air sampler (PAS) enabling the determination of individual atmospheric exposure to gas- and particle-phase HFRs using the ring-billed gull (Larus delawarensis) nesting in the Montreal area (QC, Canada). The new miniaturized elliptical-shaped PAS (mean weight: 2.72g) was tested using two sorbent types during three exposure periods (one, two and three weeks). Results showed that PAS using polyurethane foam (PUF) combined with a glass fiber filter collected all major polybrominated diphenyl ethers (PBDEs) and exhibited better performance for collecting highly hydrophobic DecaBDE mixture congeners compared to the PAS using polydimethylsiloxane (PDMS). Emerging HFRs including hexabromobenzene, Dechlorane 604 Component B, and Dechlorane plus (DP) isomers also were sampled by the PUF-based PAS. Sampling rates for most HFRs were comparable between the three exposure periods. This novel bird-borne PAS provides valuable information on the non-dietary exposure of free-ranging birds to HFRs.

Effects of extraction methods and factors on leaching of metals from recycled concrete aggregates.

Leaching of metals (calcium (Ca), chromium (Cr), copper, (Cu), iron (Fe), and zinc (Zn)) of recycled concrete aggregates (RCAs) were investigated with four different leachate extraction methods (batch water leach tests (WLTs), toxicity leaching procedure test (TCLP), synthetic precipitation leaching procedure test (SPLP), and pH-dependent leach tests). WLTs were also used to perform a parametric study to evaluate factors including (i) effects of reaction time, (ii) atmosphere, (iii) liquid-to-solid (L/S) ratio, and (iv) particle size of RCA. The results from WLTs showed that reaction time and exposure to atmosphere had impact on leaching behavior of metals. An increase in L/S ratio decreased the effluent pH and all metal concentrations. Particle size of the RCA had impact on some metals but not all. Comparison of the leached concentrations of metals from select RCA samples with WLT method to leached concentrations from TCLP and SPLP methods revealed significant differences. For the same RCA samples, the highest metal concentrations were obtained with TCLP method, followed by WLT and SPLP methods. However, in all tests, the concentrations of all four (Cr, Cu, Fe, and Zn) metals were below the regulatory limits determined by EPA MCLs in all tests with few exceptions. pH-dependent batch water leach tests revealed that leaching pattern for Ca is more cationic whereas for other metals showed more amphoteric. The results obtained from the pH-dependent tests were evaluated with geochemical modeling (MINTEQA2) to estimate the governing leaching mechanisms for different metals. The results indicated that the releases of the elements were solubility-controlled except Cr.