Artificial and Biosynthetic Nanoparticles Boost Bioelectrochemical Reactions via Efficient Bidirectional Electron Transfer of Shewanella loihica.

Bioelectrochemical reactions using whole-cell biocatalysts are promising carbon-neutral approaches because of their easy operation, low cost, and sustainability. Bidirectional (outward or inward) electron transfer via exoelectrogens plays the main role in driving bioelectrochemical reactions. However, the low electron transfer efficiency seriously inhibits bioelectrochemical reaction kinetics. Here, a three dimensional and artificial nanoparticles-constituent inverse opal-indium tin oxide (IO-ITO) electrode is fabricated and employed to connect with exoelectrogens (Shewanella loihica PV-4). The above electrode collected 128-fold higher cell density and exhibited a maximum current output approaching 1.5 mA cm-2 within 24 h at anode mode. By changing the IO-ITO electrode to cathode mode, the exoelectrogens exhibited the attractive ability of extracellular electron uptake to reduce fumarate and 16 times higher reverse current than the commercial carbon electrode. Notably, Fe-containing oxide nanoparticles are biologically synthesized at both sides of the outer cell membrane and probably contributed to direct electron transfer with the transmembrane c-type cytochromes. Owing to the efficient electron exchange via artificial and biosynthetic nanoparticles, bioelectrochemical CO2 reduction is also realized at the cathode. This work not only explored the possibility of augmenting bidirectional electron transfer but also provided a new strategy to boost bioelectrochemical reactions by introducing biohybrid nanoparticles.

Electroactive biofilm communities in microbial fuel cells for the synergistic treatment of wastewater and bioelectricity generation.

Increasing industrialization and urbanization have contributed to a significant rise in wastewater discharge and exerted extensive pressure on the existing natural energy resources. Microbial fuel cell (MFC) is a sustainable technology that utilizes wastewater for electricity generation. MFC comprises a bioelectrochemical system employing electroactive biofilms of several aerobic and anaerobic bacteria, such as Geobacter sulfurreducens, Shewanella oneidensis, Pseudomonas aeruginosa, and Ochrobacterum pseudiintermedium. Since the electroactive biofilms constitute a vital part of the MFC, it is crucial to understand the biofilm-mediated pollutant metabolism and electron transfer mechanisms. Engineering electroactive biofilm communities for improved biofilm formation and extracellular polymeric substances (EPS) secretion can positively impact the bioelectrochemical system and improve fuel cell performance. This review article summarizes the role of electroactive bacterial communities in MFC for wastewater treatment and bioelectricity generation. A significant focus has been laid on understanding the composition, structure, and function of electroactive biofilms in MFC. Various electron transport mechanisms, including direct electron transfer (DET), indirect electron transfer (IET), and long-distance electron transfer (LDET), have been discussed. A detailed summary of the optimization of process parameters and genetic engineering strategies for improving the performance of MFC has been provided. Lastly, the applications of MFC for wastewater treatment, bioelectricity generation, and biosensor development have been reviewed.

Electrochemical promotion of organic waste fermentation: Research advances and prospects.

The current methods of treating organic waste suffer from limited resource usage and low product value. Research and development of value-added products emerges as an unavoidable trend for future growth. Electro-fermentation (EF) is a technique employed to stimulate cell proliferation, expedite microbial metabolism, and enhance the production of value-added products by administering minute voltages or currents in the fermentation system. This method represents a novel research direction lying at the crossroads of electrochemistry and biology. This article documents the current progress of EF for a range of value-added products, including gaseous fuels, organic acids, and other organics. It also presents novel value-added products, such as 1,3-propanediol, 3-hydroxypropionic acid, succinic acid, acrylic acid, and lysine. The latest research trends suggest a focus on EF for cogeneration of value-added products, studying microbial community structure and electroactive bacteria, exploring electron transfer mechanisms in EF systems, developing effective methods for nutrient recovery of nitrogen and phosphorus, optimizing EF conditions, and utilizing biosensors and artificial neural networks in this area. In this paper, an analysis is conducted on the challenges that currently exist regarding the selection of conductive materials, optimization of electrode materials, and development of bioelectrochemical system (BES) coupling processes in EF systems. The aim is to provide a reference for the development of more efficient, advanced, and value-added EF technologies. Overall, this paper aims to provide references and ideas for the development of more efficient and advanced EF technology.

Newly graphene/polypyrrole (rGO/PPy) modified carbon felt as bio-cathode in bio-electrochemical systems (BESs) achieving complete denitrification.

Nitrate reduction in bio-electrochemical systems (BESs) has attracted wide attention due to its low sludge yields and cost-efficiency advantages. However, the high resistance of traditional electrodes is considered to limit the denitrification performance of BESs. Herein, a new graphene/polypyrrole (rGO/PPy) modified electrode is fabricated via one-step electrodeposition and used as cathode in BES for improving nitrate removal from wastewater. The formation and morphological results support the successful formation of rGO/PPy nanohybrids and confirm the part covalent bonding of Py into GO honeycomb lattices to form a three-dimensional cross-linked spatial structure. The electrochemical tests indicate that the rGO/PPy electrode outperforms the unmodified electrode due to the 3.9-fold increase in electrochemical active surface area and 6.9-fold decrease in the charge transfer resistance (Rct). Batch denitrification activity tests demonstrate that the BES equipped with modified rGO/PPy biocathode could not only achieve the full denitrification efficiency of 100% with energy recovery (15.9 × 10-2 ± 0.14 A/m2), but also favor microbial attach and growth with improved biocompatible surface. This work provides a feasible electrochemical route to fabricate and design a high-performance bioelectrode to enhance denitrification in BESs.

Enhancing biocathode denitrification performance with nano-Fe3O4 under polarity period reversal.

The presence of excessive concentrations of nitrate poses a threat to both the environment and human health, and the bioelectrochemical systems (BESs) are attractive green technologies for nitrate removal. However, the denitrification efficiency in the BESs is still limited by slow biofilm formation and nitrate removal. In this work, we demonstrate the efficacy of novel combination of magnetite nanoparticles (nano-Fe3O4) with the anode-cathode polarity period reversal (PPR-Fe3O4) for improving the performance of BESs. After only two-week cultivation, the highest cathodic current density (7.71 ± 1.01 A m-2) and NO3--N removal rate (8.19 ± 0.97 g m-2 d-1) reported to date were obtained in the PPR-Fe3O4 process (i.e., polarity period reversal with nano-Fe3O4 added) at applied working voltage of -0.2 and -0.5 V (vs Ag/AgCl) under bioanodic and biocathodic conditions, respectively. Compared with the polarity reversal once only process, the PPR process (i.e., polarity period reversal in the absence of nano-Fe3O4) enhanced bioelectroactivity through increasing biofilm biomass and altering microbial community structure. Nano-Fe3O4 could enhance extracellular electron transfer as a result of promoting the formation of extracellular polymers containing Fe3O4 and reducing charge transfer resistance of bioelectrodes. This work develops a novel biocathode denitrification strategy to achieve efficient nitrate removal after rapid cultivation.

Bidirectional extracellular electron transfer pathways of Geobacter sulfurreducens biofilms: Molecular insights into extracellular polymeric substances.

The basis for bioelectrochemical technology is the capability of electroactive bacteria (EAB) to perform bidirectional extracellular electron transfer (EET) with electrodes, i.e. outward- and inward-EET. Extracellular polymeric substances (EPS) surrounding EAB are the necessary media for EET, but the biochemical and molecular analysis of EPS of Geobacter biofilms on electrode surface is largely lacked. This study constructed Geobacter sulfurreducens-biofilms performing bidirectional EET to explore the bidirectional EET mechanisms through EPS characterization using electrochemical, spectroscopic fingerprinting and proteomic techniques. Results showed that the inward-EET required extracellular redox proteins with lower formal potentials relative to outward-EET. Comparing to the EPS extracted from anodic biofilm (A-EPS), the EPS extracted from cathodic biofilm (C-EPS) exhibited a lower redox activity, mainly due to a decrease of protein/polysaccharide ratio and α-helix content of proteins. Furthermore, less cytochromes and more tyrosine- and tryptophan-protein like substances were detected in C-EPS than in A-EPS, indicating a diminished role of cytochromes and a possible role of other redox proteins in inward-EET. Proteomic analysis identified a variety of redox proteins including cytochrome, iron-sulfur clusters-containing protein, flavoprotein and hydrogenase in EPS, which might serve as an extracellular redox network for bidirectional EET. Those redox proteins that were significantly stimulated in A-EPS and C-EPS might be essential for outward- and inward-EET and warranted further research. This work sheds light on the mechanism of bidirectional EET of G. sulfurreducens biofilms and has implications in improving the performance of bioelectrochemical technology.

Recent progress in the characterization and application of exo-electrogenic microorganisms.

Exo-electrogenic microorganisms are characterized by their special metabolic capability of transferring metabolic electrons out of their cell, into insoluble external electron acceptors such as iron or manganese oxides and electrodes, or vice versa take up electron from electrodes. Their conventional application is primarily limited to microbial fuel cells for electrical power generation and microbial electrolysis cells for the production of value-added products such as biohydrogen, biomethane and hydrogen peroxide. The utility of exo-electrogenic organisms has expanded into many other applications in recent times. Such examples include microbial desalination cells, microbial electro-synthesis cells producing value-added chemicals such as bio-butanol and their applications in other carbon sequestration technologies. Additionally, electrochemically-active organisms are now beginning to be employed in biosensor applications for environmental monitoring. Additionally, the utility of biocathodes in bio-electrochemical systems is also a novel application in catalyzing the cathodic oxygen reduction reaction to enhance their electrochemical performance. Advances have also been made in the expansion and use of other organisms such as the usage of photosynthetic microorganisms for the fabrication of self-sustained bio-electrochemical systems. This review attempts to provide a comprehensive picture of the state-of the art of exo-electrogenic organisms and their novel utility in bioelectrochemical systems.

Anammox with alternative electron acceptors: perspectives for nitrogen removal from wastewaters.

In the context of the anaerobic ammonium oxidation process (anammox), great scientific advances have been made over the past two decades, making anammox a consolidated technology widely used worldwide for nitrogen removal from wastewaters. This review provides a detailed and comprehensive description of the anammox process, the microorganisms involved and their metabolism. In addition, recent research on the application of the anammox process with alternative electron acceptors is described, highlighting the biochemical reactions involved, its advantages and potential applications for specific wastewaters. An updated description is also given of studies reporting the ability of microorganisms to couple the anammox process to extracellular electron transfer to insoluble electron acceptors; particularly iron, carbon-based materials and electrodes in bioelectrochemical systems (BES). The latter, also referred to as anodic anammox, is a promising strategy to combine the ammonium removal from wastewater with bioelectricity production, which is discussed here in terms of its efficiency, economic feasibility, and energetic aspects. Therefore, the information provided in this review is relevant for future applications.

Electricity generation and real oily wastewater treatment by Pseudomonas citronellolis 620C in a microbial fuel cell: pyocyanin production as electron shuttle.

In the present study, the potential of Pseudomonas citronellolis 620C strain was evaluated, for the first time, to generate electricity in a standard, double chamber microbial fuel cell (MFC), with oily wastewater (OW) being the fuel at 43.625 mg/L initial chemical oxygen demand (COD). Both electrochemical and physicochemical results suggested that this P. citronellolis strain utilized efficiently the OW substrate and generated electricity in the MFC setup reaching 0.05 mW/m2 maximum power. COD removal was remarkable reaching 83.6 ± 0.1%, while qualitative and quantitative gas chromatography/mass spectrometry (GC/MS) analysis of the OW total petroleum and polycyclic aromatic hydrocarbons, and fatty acids revealed high degradation capacity. It was also determined that P. citronellolis 620C produced pyocyanin as electron shuttle in the anodic MFC chamber. To the authors' best knowledge, this is the first study showing (phenazine-based) pyocyanin production from a species other than P. aeruginosa and, also, the first time that P. citronellolis 620C has been shown to produce electricity in a MFC. The production of pyocyanin, in combination with the formation of biofilm in the MFC anode, as observed with scanning electron microscopy (SEM) analysis, makes this P. citronellolis strain an attractive and promising candidate for wider MFC applications.

Bio-electrochemical degradation of carbamazepine (CBZ): A comprehensive study on effectiveness, degradation pathway, and toxicological assessment.

Recent attention on the detrimental effects of pharmaceutically active compounds (PhACs) in natural water has spurred researchers to develop advanced wastewater treatment methods. Carbamazepine (CBZ), a widely recognized anticonvulsant, has often been a primary focus in numerous studies due to its prevalence and resistance to breaking down. This study aims to explore the effectiveness of a bio-electrochemical system in breaking down CBZ in polluted water and to assess the potential harmful effects of the treated wastewater. The results revealed bio-electro degradation process demonstrated a collaborative effect, achieving the highest CBZ degradation compared to electrodegradation and biodegradation techniques. Notably, a maximum CBZ degradation efficiency of 92.01% was attained using the bio-electrochemical system under specific conditions: Initial CBZ concentration of 60 mg/L, pH level at 7, 0.5% (v/v) inoculum dose, and an applied potential of 10 mV. The degradation pathway established by identifying intermediate products via High-Performance Liquid Chromatography-Mass Spectrometry, revealed the complete breakdown of CBZ without any toxic intermediates or end products. This finding was further validated through in vitro and in vivo toxicity assays, confirming the absence of harmful remnants after the degradation process.

Response of nutrients removal efficiency, enzyme activities and microbial community to current and voltage in a bio-electrical anammox system.

The effects of different current intensities and voltage levels on nutrient removal performance and microbial community evolution in a Bio-Electrical Anammox (BEA) membrane bioreactor (MBR) were evaluated. The nitrogen removal efficiency increased with the current intensity within the range of 64-83 mA, but this improvement was limited at the current further increased. The phosphorus removal in the BEA MBR was attributed to the release of Fe2+, which was closely associated with the applied current to the electrodes. Heme c concentration, enzyme activities, and specific anammox activity exhibited a decreasing trend, while the functional denitrification genes showed a positive correlation with rising voltage. The nitrogen removal efficiency of the BEA system initially increased and then decreased with the voltage rose from 1.5V to 3.5V, peaking at 2.0V of 94.02% ± 1.19%. Transmission electron microscopy and flow cytometry results indicated that accelerated cell apoptosis/lysis led to an irreversible collapse of the biological nitrogen removal system at 3.5V. Candidatus Brocadia was the predominant anammox bacteria in the BEA system. In contrast, closely related Candidatus Kuenenia and Chloroflexi bacteria were gradually eliminated in electrolytic environment. The abundances of Proteobacteria-affiliated denitrifiers were increased with the voltage rising since the organic matter released by the cell apoptosis/lysis was accelerated at a high voltage level.

Bioelectrochemical synthesis of rhamnolipids and energy production and its correlation with nitrogen in air-cathode microbial fuel cells.

Microbial fuel cells (MFCs) have been recently proven to synthesise biosurfactants from waste products. In classic bioreactors, the efficiency of biosynthesis process can be controlled by the concentration of nitrogen content in the electrolyte. However, it was not known whether a similar control mechanism could be applied in current-generating conditions. In this work, the effect of nitrogen concentration on biosurfactant production from waste cooking oil was investigated. The concentration of NH4Cl in the electrolyte ranged from 0 to 1 g L-1. The maximum power density equal to 17.5 W m-3 was achieved at a concentration of 0.5 g L-1 (C/N = 2.32) and was accompanied by the highest surface tension decrease (to 54.6 mN m-1) and an emulsification activity index of 95.4%. Characterisation of the biosurfactants produced by the LC-MS/MS method showed the presence of eleven compounds belonging to the mono- and di-rhamnolipids group, most likely produced by P. aeruginosa, which was the most abundant (19.6%) in the community. Importantly, we have found a strong correlation (R = -0.96) of power and biosurfactant activity in response to C/N ratio. This study shows that nitrogen plays an important role in the current-generating metabolism of waste cooking oil. To the best of our knowledge, this is the first study where the nitrogen optimisation was investigated to improve the synthesis of biosurfactants and power generation in a bioelectrochemical system.

Enhancing nitrogen removal from wastewater in a low C/N ratio using an air-lift bio-electrochemical reactor (ALBER).

This study focuses on the development of an air-lift bio-electrochemical reactor (ALBER) with a continuous feeding regime. The objective is to enhance nitrogen removal from synthetic wastewater with a low carbon-to-nitrogen (C/N) ratio. The chemical oxygen demand (COD) and total nitrogen (TN) of the influent wastewater were 500 and 200 mg/L, respectively. The effect of four independent variables, i.e., temperature, hydraulic retention time (HRT), N-NH4+/TN ratio and current density in the range of 16-32 °C, 6-12 h, 25-75%, and 2-10 A/m2, respectively, at three levels on the bio-electrochemical reactor performance were investigated during the bio-electrochemical reactor operation. The Face Center Cube (FCC) of response surface methodology (RSM) was used for design of experiments and model of obtained data. The ALBER achieved the maximum TN removal of 73% (146 mg/l) using external voltage and zeolite/plastic medium at temperature of 16 °C, HRT of 6 h, current density of 2 A/m2 and N-NH4+/TN ratio of 75%. The results indicated that shortening the HRT from 12 to 6 h, reducing the temperature from 32 °C to 24 °C, increasing the current density from 2 to 6 A/m2 and the reduction of nitrate concentration caused an increase in the TN removal. The results indicated that the performance of air-lift bio-electrochemical for nitrogen removal could be attributed to autotrophic denitrification (AD) and simultaneous nitrification/denitrification (SND). The research findings suggest that the ALBER should be further studied for potential use in treating industrial wastewater at low temperatures.

Impact of Condition Variations on Bioelectrochemical System Performance: An Experimental Investigation of Sulfamethoxazole Degradation.

Bioelectrochemical systems (BESs) are an innovative technology for the efficient degradation of antibiotics. Shewanella oneidensis (S. oneidensis) MR-1 plays a pivotal role in degrading sulfamethoxazole (SMX) in BESs. Our study investigated the effect of BES conditions on SMX degradation, focusing on microbial activity. The results revealed that BESs operating with a 0.05 M electrolyte concentration and 2 mA/cm2 current density outperformed electrolysis cells (ECs). Additionally, higher electrolyte concentrations and elevated current density reduced SMX degradation efficiency. The presence of nutrients had minimal effect on the growth of S. oneidensis MR-1 in BESs; it indicates that S. oneidensis MR-1 can degrade SMX without nutrients in a short period of time. We also highlighted the significance of mass transfer between the cathode and anode. Limiting mass transfer at a 10 cm electrode distance enhanced S. oneidensis MR-1 activity and BES performance. In summary, this study reveals the complex interaction of factors affecting the efficiency of BES degradation of antibiotics and provides support for environmental pollution control.

Current advances of chlorinated organics degradation by bioelectrochemical systems: a review.

Chlorinated organic compounds (COCs) are typical refractory organic compounds, having high biological toxicity. These compounds are a type of pervasive pollutants that can be present in polluted soil, air, and various types of waterways, such as groundwater, rivers, and lakes, posing a significant threat to the ecological environment and human health. Bioelectrochemical systems (BESs) are an effective strategy for the degradation of bio-refractory compounds. BESs improve the waste treatment efficiency through the application of weak electrical stimulation. This review discusses the processes of BESs configurations and degradation performances in different environmental media including wastewater, soil, waste gas and groundwater. In addition, the degradation mechanisms and performance-enhancing additives are summarized. The future challenges and perspectives on the development of BES for COCs removal are briefly discussed.

Atomic Pyridinic Nitrogen as Highly Active Metal-Free Coordination Sites at the Biotic-Abiotic Interface for Bio-Electrochemical CO2 Reduction.

Bio-electrochemical conversion of anthropogenic CO2 into value-added products using cost-effective metal-free catalysts represents a promising strategy for sustainable fuel production. Herein, N-doped carbon nanosheets synthesized via pyrolysis of the zeolitic-imidazolate framework (ZIF) are developed for constructing efficient biohybrids to facilitate CO2 -to-CH4 conversion. The microbial enrichment and bio-interfacial charge transfer are significantly affected by the proportion of the co-existed graphitic-N, pyridinic-N, and pyrrolic-N in the defective carbon nanosheets. It is unfolded that pyridinic-N and pyrrolic-N with the doped N atoms near the edge can significantly enhance the adsorption of their adjacent C atoms toward O, leading to improved microbe enrichment. Especially, pyridinic-N which can provide one p electron to the aromatic π system, greatly enhances the electron-donating capability of the carbon nanosheets to the microorganisms. Correspondingly, due to its largest amount of pyridinic-N doping, the N-doped carbon nanosheets derived from ZIF pyrolysis at 900 °C (denoted 900-NC) achieve the highest methane production of ≈215.7 mmol m-2  day-1 with a high selectivity (Faradaic efficiency = ≈94.2%) at -0.9 V versus Ag/AgCl. This work demonstrates the effectiveness of N-doped carbon catalysts for bio-electrochemical CO2 fixation and contributes to the understanding of N functionalities toward microbiome response and biotic-abiotic charge transfer in various bio-electrochemical systems.

Investigating Variability in Microbial Fuel Cells.

In scientific studies, replicas should replicate, and identical conditions should produce very similar results which enable parameters to be tested. However, in microbial experiments which use real world mixed inocula to generate a new "adapted" community, this replication is very hard to achieve. The diversity within real-world microbial systems is huge, and when a subsample of this diversity is placed into a reactor vessel or onto a surface to create a biofilm, stochastic processes occur, meaning there is heterogeneity within these new communities. The smaller the subsample, the greater this heterogeneity is likely to be. Microbial fuel cells are typically operated at a very small laboratory scale and rely on specific communities which must include electrogenic bacteria, known to be of low abundance in most natural inocula. Microbial fuel cells (MFCs) offer a unique opportunity to investigate and quantify variability as they produce current when they metabolize, which can be measured in real time as the community develops. In this research, we built and tested 28 replica MFCs and ran them under identical conditions. The results showed high variability in terms of the rate and amount of current production. This variability perpetuated into subsequent feeding rounds, both with and without the presence of new inoculate. In an attempt to control this variability, reactors were reseeded using established "good" and "bad" reactors. However, this did not result in replica biofilms, suggesting there is a spatial as well as a compositional control over biofilm formation. IMPORTANCE The research presented, although carried out in the area of microbial fuel cells, reaches an important and broadly impacting conclusion that when using mixed inoculate in replica reactors under replicated conditions, different communities emerge capable of different levels of metabolism. To date there has been very little research focusing on this, or even reporting it, with most studies using duplicate or triplicate reactors, in which this phenomenon is not fully observed. Publishing data in which replicas do not replicate will be an important and brave first step in the research into understanding this fundamental microbial process.

Retracted: The bidirectional extracellular electron transfer process aids iron cycling by Geoalkalibacter halelectricus in a highly saline-alkaline condition.

Bidirectional extracellular electron transfer (EET) is crucial to upholding microbial metabolism with insoluble electron acceptors or donors in anoxic environments. Investigating bidirectional EET-capable microorganisms is desired to understand the cell-cell and microbe-mineral interactions and their role in mineral cycling besides leveraging their energy generation and conversion, biosensing, and bio-battery applications. Here, we report on iron cycling by haloalkaliphilic Geoalkalibacter halelectricus via bidirectional EET under haloalkaline conditions. It efficiently reduces Fe3+ oxide (Fe2O3) to Fe0 at a 0.75 ± 0.08 mM/mgprotein/d rate linked to acetate oxidation via outward EET and oxidizes Fe0 to Fe3+ at a 0.24 ± 0.03 mM/mgprotein/d rate via inward EET to reduce fumarate. Bioelectrochemical cultivation confirmed its outward and inward EET capabilities. It produced 895 ± 23 µA/cm2 current by linking acetate oxidation to anode reduction via outward EET and reduced fumarate by drawing electrons from the cathode (‒2.5 ± 0.3 µA/cm2) via inward EET. The cyclic voltammograms of G. halelectricus biofilms revealed redox moieties with different formal potentials, suggesting the involvement of different membrane components in bidirectional EET. The cyclic voltammetry and GC-MS analysis of the cell-free spent medium revealed the lack of soluble redox mediators, suggesting direct electron transfer by G. halelecctricus in achieving bidirectional EET. By reporting on the first haloalkaliphilic bacterium capable of oxidizing and reducing insoluble Fe0 and Fe3+ oxide, respectively, this study advances the limited understanding of the metabolic capabilities of extremophiles to respire on insoluble electron acceptors or donors via bidirectional EET and invokes the possible role of G. halelectricus in iron cycling in barely studied haloalkaline environments. IMPORTANCE Bidirectional extracellular electron transfer (EET) appears to be a key microbial metabolic process in anoxic environments that are depleted in soluble electron donor and acceptor molecules. Though it is an ecologically important and applied microbial phenomenon, it has been reported with a few microorganisms, mostly from nonextreme environments. Moreover, direct electron transfer-based bidirectional EET is studied for very few microorganisms with electrodes in engineered systems and barely with the natural insoluble electron acceptor and donor molecules in anoxic conditions. This study advances the understanding of extremophilic microbial taxa capable of bidirectional EET and its role in barely investigated Fe cycling in highly saline-alkaline environments. It also offers research opportunities for understanding the membrane components involved in the bidirectional EET of G. halelectricus. The high rate of Fe3+ oxide reduction activity by G. halelectricus suggests its possible use as a biocatalyst in the anaerobic iron bioleaching process under neutral-alkaline pH conditions.

Quantum dots decorated photoanodes in bioelectrochemical fuel cells: Enhanced electricity generation using green algae.

The power performance of the bio-electrochemical fuel cells (BEFCs) depends mainly on the energy harvesting ability of the anode material. The anode materials with low bandgap energy and high electrochemical stability are highly desirable in the BEFCs. To address this issue, a novel anode is designed using indium tin oxide (ITO) modified by chromium oxide quantum dots (CQDs). The CQDs were synthesized using facile and advanced pulsed laser ablation in liquid (PLAL) technique. The combination of ITO and CQDs improved the optical properties of the photoanode by exhibiting a broad range of absorption in the visible to UV region. A systematic study has been performed to optimize the amount of CQDs and green Algae (Alg) film grown using the drop casting method. Chlorophyll (a, b, and total) content of algal cultures (with different concentrations) were optimized to investigate the power generation performance of each cell. The BEFC cell (ITO/Alg10/Cr3//Carbon) with optimized amounts of Alg and CQDs demonstrated enhanced photocurrent generation of 120 mA cm-2 at a photo-generated potential of 24.6 V m-2 . The same device exhibited a maximum power density of 7 W m-2 under continuous light illumination. The device also maintained 98% of its initial performance after 30 repeated cycles of light on-off measurements.

Bioelectrochemical system accelerates reductive dechlorination through extracellular electron transfer networks.

Bioelectrochemical system is considered as a promising approach for enhanced bio-dechlorination. However, the mechanism of extracellular electron transfer in the dechlorinating consortium is still a controversial issue. In this study, bioelectrochemical systems were established with cathode potential settings at -0.30 V (vs. SHE) for trichloroethylene reduction. The average dechlorination rate (102.0 µM Cl·d-1) of biocathode was 1.36 times higher than that of open circuit (74.7 µM Cl·d-1). Electrochemical characterization via cyclic voltammetry illustrated that electrostimulation promoted electrochemical activity for redox reactions. Moreover, bacterial community structure analyses indicated electrical stimulation facilitated the enrichment of electroactive and dechlorinating populations on cathode. Metagenomic and quantitative polymerase chain reaction (qPCR) analyses revealed that direct electron transfer (via electrically conductive pili, multi-heme c-type cytochromes) between Axonexus and Desulfovibrio/cathode and indirect electron transfer (via riboflavin) for Dehalococcoides enhanced dechlorination process in BES. Overall, this study verifies the effectiveness of electrostimulated bio-dechlorination and provides novel insights into the mechanisms of dechlorination process enhancement in bioelectrochemical systems through electron transfer networks.