The cytochrome b6f complex: plastoquinol oxidation and regulation of electron transport in chloroplasts.

In oxygenic photosynthetic systems, the cytochrome b6f (Cytb6f) complex (plastoquinol:plastocyanin oxidoreductase) is a heart of the hub that provides connectivity between photosystems (PS) II and I. In this review, the structure and function of the Cytb6f complex are briefly outlined, being focused on the mechanisms of a bifurcated (two-electron) oxidation of plastoquinol (PQH2). In plant chloroplasts, under a wide range of experimental conditions (pH and temperature), a diffusion of PQH2 from PSII to the Cytb6f does not limit the intersystem electron transport. The overall rate of PQH2 turnover is determined mainly by the first step of the bifurcated oxidation of PQH2 at the catalytic site Qo, i.e., the reaction of electron transfer from PQH2 to the Fe2S2 cluster of the high-potential Rieske iron-sulfur protein (ISP). This point has been supported by the quantum chemical analysis of PQH2 oxidation within the framework of a model system including the Fe2S2 cluster of the ISP and surrounding amino acids, the low-potential heme b6L, Glu78 and 2,3,5-trimethylbenzoquinol (the tail-less analog of PQH2). Other structure-function relationships and mechanisms of electron transport regulation of oxygenic photosynthesis associated with the Cytb6f complex are briefly outlined: pH-dependent control of the intersystem electron transport and the regulatory balance between the operation of linear and cyclic electron transfer chains.

Targeting Manganese Amidinate and ß-Ketoiminate Complexes as Precursors for Mn-Based Thin Film Deposition.

With a focus on Mn based organometallic compounds with suitable physico-chemical properties to serve as precursors for chemical vapor deposition (CVD) and atomic layer deposition (ALD) of Mn-containing materials, systematic synthetic approaches with ligand variation, detailed characterization, and theoretical input from density functional theory (DFT) studies are presented. A series of new homoleptic all-nitrogen and mixed oxygen/nitrogen-coordinated Mn(II) complexes bearing the acetamidinate, formamidinate, guanidinate and ß-ketoiminate ligands have been successfully synthesized for the first time. The specific choice of these ligand classes with changes in structure and coordination sphere and side chain variations result in significant structural differences whereby mononuclear and dinuclear complexes are formed. This was supported by density functional theory (DFT) studies. The compounds were thoroughly characterized by single crystal X-ray diffraction, magnetic measurements, mass spectrometry and elemental analysis. To evaluate their suitability as precursors for deposition of Mn-based materials, the thermal properties were investigated in detail. Mn(II) complexes possessing the most promising thermal properties, namely Bis(N,N'-ditertbutylformamidinato)manganese(II) (IV) and Bis(4-(isopropylamino)pent-3-en-2-onato)manganese(II) (ßIII) were used in reactivity studies with DFT to explore their interaction with oxidizing co-reactants such as oxygen and water which will guide future CVD and ALD process development.

CuAAC-Based Synthesis, Copper-Catalyzed Aldehyde-Forming Hydrolytic Fission and Antiproliferative Evaluation of Novel Ferrocenoylamino-Substituted Triazole-Tethered Quinine-Chalcone Hybrids.

A series of novel triazole-tethered ferrocenoylamino-substituted cinchona-chalcone hybrids along with two representative benzoylamino-substituted reference compounds were prepared by three methods of CuAAC chemistry. In line with the limited success or complete failure of attempted conversions with low catalyst loadings, by means of DFT modeling studies, we demonstrated that a substantial part of the Cu(I) ions can be chelated and thus trapped in the aroylamino-substituted cinchona fragment and all of the accessible coordinating sites of the chalcone residues. Accordingly, increased amounts of catalysts were used to achieve acceptable yields; however, the cycloadditions with para-azidochalcones were accompanied by partial or complete aldehyde-forming hydrolytic fission of the enone C=C bond in a substituent-, solvent- and copper load-dependent manner. The experienced hydrolytic stability of the hybrids obtained by cycloadditions with ortho-azidochalcones was interpreted in terms of relative energetics, DFT reactivity indices and MO analysis of simplified models of two isomer copper-enone complexes. The novel hybrids were evaluated on HeLa, MDA-MB-231 and A2780 cell lines and showed substantial activity at low-to-submicromolar concentrations. An organometallic model carrying 3,4,5-trimethoxyphenyl residue in the enone part with a para-disubstituted benzene ring in the central skeletal region was identified as the most potent antiproliferative lead, characterized by submicromolar IC50 values measured on the three investigated cells. The biological assays also disclosed that this ferrocenoylamino-containing lead compound displays a ca. two- to five-fold more substantial antiproliferative effect than its benzoylamino-substituted counterpart.

Pyridine Functionalized Carbon Nanotubes: Unveiling the Role of External Pyridinic Nitrogen Sites for Oxygen Reduction Reaction.

Pyridinic nitrogen has been recognized as the primary active site in nitrogen-doped carbon electrocatalysts for the oxygen reduction reaction (ORR), which is a critical process in many renewable energy devices. However, the preparation of nitrogen-doped carbon catalysts comprised of exclusively pyridinic nitrogen remains challenging, as well as understanding the precise ORR mechanisms on the catalyst. Herein, a novel process is developed using pyridyne reactive intermediates to functionalize carbon nanotubes (CNTs) exclusively with pyridine rings for ORR electrocatalysis. The relationship between the structure and ORR performance of the prepared materials is studied in combination with density functional theory calculations to probe the ORR mechanism on the catalyst. Pyridinic nitrogen can contribute to a more efficient 4-electron reaction pathway, while high level of pyridyne functionalization result in negative structural effects, such as poor electrical conductivity, reduced surface area, and small pore diameters, that suppressed the ORR performance. This study provides insights into pyridine-doped CNTs-functionalized for the first time via pyridyne intermediates-as applied in the ORR and is expected to serve as valuable inspiration in designing high-performance electrocatalysts for energy applications.

The Structural Characterisation and DFT-Aided Interpretation of Vibrational Spectra for Cyclo(l-Cys-d-Cys) Cyclic Dipeptide in a Solid State.

Cyclic dipeptides with two intramolecular peptide bonds forming a six-membered 2,5-diketopiperazine ring are gaining significant attention due to their biological and chemical properties. Small changes in the local geometry of such molecules (from cis to trans) can lead to significant structural differences. This work presents the results of a study of cyclo(l-Cys-d-Cys), a dipeptide comprising two cysteine molecules in opposite chiral configurations, with the functional groups situated at both sides of the diketopiperazine ring. X-ray diffraction (XRD) experiment revealed that the molecule crystallises in the P-1 space group, which includes the centre of inversion. The IR and Raman vibrational spectra of the molecule were acquired and interpreted in terms of the potential energy distribution (PED) according to the results of density functional theory (DFT) calculations. The DFT-assisted analysis of energy frameworks for the hydrogen bond network within molecular crystals was performed to support the interpretation of X-ray structural data. The optimisation of the computational model based on three-molecule geometry sections from the crystallographic structure, selected to appropriately reflect the intermolecular interactions responsible for the formation of 1D molecular tapes in cyclo(l-Cys-d-Cys) crystal, allowed for better correspondence between theoretical and experimental vibrational spectra. This work can be considered the first complete structural characterisation of cyclo(l-Cys-d-Cys), complemented via vibrational spectroscopy results with full band assignment aided with the use of the DFT method.

Environmentally benign cinchonain IIa from Uncaria laevigata for corrosion inhibition of Q235 steel in HCl corrosive medium: Experimental and theoretical investigation.

Traditional corrosion inhibitors make great contribution to metal protection, but also cause environmental pollution. To solve the problem, plant extracts as green corrosion inhibitors have attracted much attention in recent years. Plants are good raw materials for corrosion inhibitors and also meet the requirements of industry. However, they have not been successfully applied in industry due to the unknown composition of the effective corrosion inhibitors and large dosage thereof. Therefore, cinchonain IIa was separated from Uncaria laevigata with abundant sources and low cost from nature in this work. Here we hypothesized that cinchonain IIa could show good corrosion inhibition performance for Q235 steel in the acidic medium. Through experiments and theoretical calculation, we studied the corrosion inhibition effect of cinchonain IIa on Q235 in 1 M HCl solution at 298 K for 48 h. Electrochemical experiments revealed that the inhibition efficiency of 200 mg/L cinchonain IIa in 1 M HCl for Q235 steel was 94.08% for 48 h. It even showed over 93% corrosion inhibition efficiency and durable protection performance to 28 d. Surface observations indicated that cinchonain IIa were firmly attached to the steel surface by forming a protective film. Moreover, quantum chemical calculation and molecular dynamics simulation revealed the inhibition mechanism at molecular and atomic level. Compared with some plant extracts, here we demonstrate that the outstanding advantages of cinchonain IIa include sustained protective effect, small dosage, and low toxicity. Accordingly, it may be used as a green industrial corrosion inhibitor with great potential in oilfield acidification and acid pickling.

Racemization mechanism of lithium tert-butylphenylphosphido-borane: A kinetic insight.

The racemization mechanism of tert-butylphenylphosphido-borane is investigated experimentally and theoretically. Based on this converging approach, it is shown, first, that several phosphido-borane molecular species coexist at the time of the reaction and, second, that one particular of both initially assumed reactive routes most significantly contribute to the overall racemization process. From our converging modeling and experimental measurement, it comes out that the most probable species to be here encountered is a phosphido-borane-Li (THF)2 neutral solvate, whose P-stereogenic center monomolecular inversion through a Y-shaped transition structure (Δr G°≠ : 81 kJ mol-1 ) brings the largest contribution to the racemization process.

QSAR Modeling, Molecular Docking and Cytotoxic Evaluation for Novel Oxidovanadium(IV) Complexes as Colon Anticancer Agents.

Four new drug-based oxidovanadium (IV) complexes were synthesized and characterized by various spectral techniques, including molar conductance, magnetic measurements, and thermogravimetric analysis. Moreover, optimal structures geometry for all syntheses was obtained by the Gaussian09 program via the DFT/B3LYP method and showed that all of the metal complexes adopted a square-pyramidal structure. The essential parameters, electrophilicity (ω) value and expression for the maximum charge that an electrophile molecule may accept (ΔNmax) showed the practical biological potency of [VO(CTZ)2] 2H2O. The complexes were also evaluated for their propensity to bind to DNA through UV-vis absorption titration. The result revealed a high binding ability of the [VO(CTZ)2] 2H2O complex with Kb = 1.40 × 106 M-1. Furthermore, molecular docking was carried out to study the behavior of the VO (II) complexes towards colon cancer cell (3IG7) protein. A quantitative structure-activity relationship (QSAR) study was also implemented for the newly synthesized compounds. The results of validation indicate that the generated QSAR model possessed a high predictive power (R2 = 0.97). Within the investigated series, the [VO(CTZ)2] 2H2O complex showed the greatest potential the most selective compound comparing to the stander chemotherapy drug.

Synthesis and SAR Analysis of Novel 4-Hydroxytamoxifen Analogues Based on Their Cytotoxic Activity and Electron-Donor Character.

Utilizing McMurry reactions of 4,4'-dihydroxybenzophenone with appropriate carbonyl compounds, a series of 4-Hydroxytamoxifen analogues were synthesized. Their cytotoxic activity was evaluated in vitro on four human malignant cell lines (MCF-7, MDA-MB 231, A2058, HT-29). It was found that some of these novel Tamoxifen analogues show marked cytotoxicity in a dose-dependent manner. The relative ROS-generating capability of the synthetized analogues was evaluated by cyclic voltammetry (CV) and DFT modeling studies. The results of cell-viability assays, CV measurements and DFT calculations suggest that the cytotoxicity of the majority of the novel compounds is mainly elicited by their interactions with cellular targets including estrogen receptors rather than triggered by redox processes. However, three novel compounds could be involved in ROS-production and subsequent formation of quinone-methide preventing proliferation and disrupting the redox balance of the treated cells. Among the cell lines studied, HT-29 proved to be the most susceptible to the treatment with compounds having ROS-generating potency.

Experimental and Theoretical Study on the Homodimerization Mechanism of 3-Acetylcoumarin.

In the present study, the reaction conditions for homodimerization process of 3-acetylcoumarin were achieved under sonication using combination of zinc and metallic salt (ZnCl2 or Zn(OAc)2). Appropriate frequency and sound amplitude have been identified as significant variables for the initiation of the reaction. On the base of first principal calculations and experimental results, the mechanism of the reaction was investigated. The relative stability of the possible intermediates has been compared, including evaluation on the ionic and radical reaction pathways for the dimerization process. Theoretical results suggested that the radical mechanism is more favorable. The C-C bond formation between the calculated radical intermediates occurs spontaneously (∆G = -214 kJ/mol for ZnCl2, -163 kJ/mol in the case of Zn(OAc)2), which proves the possibility for the homodimerization of 3-acetylcoumarin via formation of radical species. Both experimental and theoretical data clarified the activation role of the solvent on the reactivity of the Zn-salt. The formation of complexes of solvent molecules with Zn-atom from the ZnCl2 reduces the energy barrier for the dissociation of Zn-Cl bond and facilitate the formation of the dimeric product.

Defect Formation, T-Atom Substitution and Adsorption of Guest Molecules in MSE-Type Zeolite Framework-DFT Modeling.

We used computational modeling, based on Density Functional Theory, to help understand the preference for the formation of silanol nests and the substitution of Si by Ti or Al in different crystallographic positions of the MSE-type framework. All these processes were found to be energetically favorable by more than 100 kJ/mol. We suggested an approach for experimental identification of the T atom position in Ti-MCM-68 zeolite via simulation of infrared spectra of pyridine and acetonitrile adsorption at Ti. The modeling of adsorption of hydrogen peroxide at Ti center in the framework has shown that the molecular adsorption was preferred over the dissociative adsorption by 20 to 40 kJ/mol in the presence or absence of neighboring T-atom vacancy, respectively.

Electrophilic Fluorination of Alkenes via Bora-Wagner-Meerwein Rearrangement. Access to ß-Difluoroalkyl Boronates.

The electrophilic fluorination of geminal alkyl substituted vinyl-Bmida derivatives proceeds via bora-Wagner-Meerwein rearrangement. According to DFT modelling studies this rearrangement occurs with a low activation barrier via a bora-cyclopropane shaped TS. The Bmida group has a larger migration aptitude than the alkyl moiety in the Wagner-Meerwein rearrangement of the presented electrophilic fluorination reactions.

Resonance Assisted Hydrogen Bonding Phenomenon Unveiled through Both Experiments and Theory: A New Family of Ethyl N-Salicylideneglycinate Dyes.

Extensive experimental and theoretical investigations are reported on the nature of resonance-assisted hydrogen bonding phenomenon (RAHB) and its influence on photophysical properties of the newly designed dyes differing in donor-acceptor properties, namely ethyl N-salicylideneglycinate (1), ethyl N-(5-methoxysalicylidene)glycinate (2), ethyl N-(5-bromosalicylidene)glycinate (3) and ethyl N-(5-nitrosalicylidene)glycinate (4). All compounds are thermochromic in the solid state and they contain a typical intramolecular O-H⋅⋅⋅N hydrogen bond formed between the hydroxyl hydrogen atom and the imine nitrogen atom, yielding the enol form in the solid state. It is unveiled, that the magnitude of RAHB effect fine tunes the strength of the O-H⋅⋅⋅N bonding and accordingly the relative populations of the enol, cis-keto and trans-keto forms leading to variation of the photophysical properties of 1-4. It is determined, that the electron-withdrawing NO2 in 4 amplifies the most RAHB effect causing the breaking of the O-H⋅⋅⋅N hydrogen bond and accordingly formation of the dominant cis-keto isomer in both the solid state and EtOH. To this end, the UV/Vis spectra of 1-3 in EtOH revealed the exclusive presence of the enol form, while the prevalent contribution of the cis-keto form was found for 4. Furthermore, only compound 4 is emissive in the solid state in ambient condition due to dual emission arising from the cis-keto* and trans-keto* forms, while 2 was found to be highly emissive in EtOH. It is revealed qualitatively and quantitatively, based on the ETS-NOCV charge and energy decomposition scheme and the EDDB population-based method, that RAHB is strongly a non-local phenomenon based on electrons pumping or sucking through both the π- and σ-channels, which accordingly exerts chemical bonding changes at both the phenyl ring and predominantly a distant O-H⋅⋅⋅N area.

Unveiling the Local Structure of Palladium Loaded into Imine-Linked Layered Covalent Organic Frameworks for Cross-Coupling Catalysis.

Layered covalent organic frameworks (2D-COFs), composed of reversible imine linkages and accessible pores, offer versatility for chemical modifications towards the development of catalytic materials. Nitrogen-enriched COFs are good candidates for binding Pd species. Understanding the local structure of reacting Pd sites bonded to the COF pores is key to rationalize interactions between active sites and porous surfaces. By combining advanced synchrotron characterization methods with periodic computational DFT modeling, the precise atomic structure of catalytic Pd sites attached to local defects is resolved within an archetypical imine-linked 2D-COF. This material was synthesized using an in situ method as a gel, under which imine hydrolysis and metalation reactions are coupled. Local defects formed in situ within imine-linked 2D-COF materials are highly reactive towards Pd metalation, resulting in active materials for Suzuki-Miyaura cross-coupling reactions.

Sugeno fuzzy inference system modeling and DFT calculations for the treatment of pesticide-laden water by newly developed arginine functionalized magnetic Mn-based metal organic framework.

The uncontrolled utilization of pesticides poses a significant risk to the environment and human health, making its management essential. In this regard, a new arginine functionalized magnetic Mn-based metal-organic framework (Arg@m-Mn-MOF) was fabricated and assessed for the removal of cypermethrin (CYP) and chlorpyrifos (CHL) from aqueous system. The Arg@m-Mn-MOF was characterized by scanning electron microscopy, energy dispersive X-ray, Fourier transform infrared spectroscopy, X-ray diffraction, and Brunauer-Emmett-Teller analysis. Various parameters were optimized in a series of batch experiments and the following conditions were found optimal: pH: 4 and 5, contact time: 20 min, adsorbent dosage: 0.6 and 0.8 g L-1 with initial concentration: 10 mg L-1 and temperature: 298 K for CYP and CHL, respectively. The composite attained a maximum removal capacity of 44.84 and 71.42 mg g-1 for CYP and CHL, respectively. The elucidated data was strongly fitted to the pseudo-second-order model of kinetics (R2 > 0.98) and Langmuir isotherm (R2 > 0.98). Based upon 350 experimental datasets obtained from batch studies and interpolated data, the adsorption capacity of the adsorbent was elucidated with R2 > 0.97 (CHL) and > 0.91 (CYP). The adsorption energy (- 11.67 kcal mol-1) calculated by Gaussian software suggests a good interaction between arginine and CHL through H-bonding. The present study's findings suggested the prepared Arg@m-Mn-MOF as a promising adsorbent for the efficient removal of pesticides from agriculture runoff.

Homogeneously Dispersed Graphene Nanoplatelets as Long-Term Corrosion Inhibitors for Aluminum Matrix Composites.

Deformation-driven metallurgy was implemented to prepare graphene nanoplatelet (GNP)-reinforced aluminum matrix composites with a time-dependent self-enhancement in corrosion resistance. Severe plastic deformation contributed to the sufficient brokenness, thinning, enfolding, and redispersion of GNPs, as well as grain refinement. The homogeneously dispersed GNPs showed a great corrosion inhibition mechanism in a chloride-containing environment, ascribed to the formation of a carbon-doped protective film via diffusion and chemical bonding between GNPs and the surface oxide film. Electrochemical and intergranular corrosion tests were conducted to show the enhancement of long-term corrosion resistance. First-principles calculations were performed to explore the high corrosion resistance of the carbon-doped protective film. The energy barriers of vacancy formation, Cl ingress, and charge transfer were synchronously enhanced with the addition of GNPs into aluminum matrix composites as long-term corrosion inhibitors.

A Singular Molecule-to-Molecule Transformation on Video: The Bottom-Up Synthesis of Fullerene C60 from Truxene Derivative C60H30.

Singular reaction events of small molecules and their dynamics remain a hardly understood territory in chemical sciences since spectroscopy relies on ensemble-averaged data, and microscopic scanning probe techniques show snapshots of frozen scenes. Herein, we report on continuous high-resolution transmission electron microscopic video imaging of the electron-beam-induced bottom-up synthesis of fullerene C60 through cyclodehydrogenation of tailor-made truxene derivative 1 (C60H30), which was deposited on graphene as substrate. During the reaction, C60H30 transformed in a multistep process to fullerene C60. Hereby, the precursor, metastable intermediates, and the product were identified by correlations with electron dose-corrected molecular simulations and single-molecule statistical analysis, which were substantiated with extensive density functional theory calculations. Our observations revealed that the initial cyclodehydrogenation pathway leads to thermodynamically favored intermediates through seemingly classical organic reaction mechanisms. However, dynamic interactions of the intermediates with the substrate render graphene as a non-innocent participant in the dehydrogenation process, which leads to a deviation from the classical reaction pathway. Our precise visual comprehension of the dynamic transformation implies that the outcome of electron-beam-initiated reactions can be controlled with careful molecular precursor design, which is important for the development and design of materials by electron beam lithography.

Experimental and theoretical insights into the RCS-Involved electro-catalytic transformation of 4-nitrophenol.

The important role of reactive chlorine species (RCS) in electrochemical system has been widely concerned for water disinfection recently. In this study, we built an electrochemical system using carbon nanotube as cathode and oxide precursor (Ti/SnO2-Sb2O5-IrO2) as anode, where RCS was produced from Cl-. This system was used to degrade nitrogen contaminants, i.e. NO3- and 4-nitrophenol. Optimization of the reaction conditions was carried out by a treatment of inorganic nitrogen contaminant NO3- and the optimal condition of the electrochemical system was determined at U = 5.5 V, and pH = 10 with a Cl- concentration of 2000 mg L-1, and the removal efficiency of NO3- can reach up to 60.6% in 150 min. Under the optimal condition, a common nitrogenous organic pollutant, 4-nitrophenol was treated and a removal efficiency of nearly 100% in 90 min. To investigate the detailed degradation mechanism in the applied electrochemical system, a combined method of products identification and density functional theory (DFT) calculation was employed. It concluded that Cl radicals' generation was stimulated was stimulated by the OH radicals after adding Cl- into the electrochemical system. These two radicals jointly promoted the transformation of 4-nitrophenol resulting in the formation of more toxic organic and inorganic substances. In addition, a conversion of organic nitro group to amino group leading to the formation of 4-aminophenol was found and explained by the indirect reduction theory.

Understanding Dimethyl Methylphosphonate Adsorption and Decomposition on Mesoporous CeO2.

The increased risk of chemical warfare agent usage around the world has intensified the search for high-surface-area materials that can strongly adsorb and actively decompose chemical warfare agents. Dimethyl methylphosphonate (DMMP) is a widely used simulant molecule in laboratory studies for the investigation of the adsorption and decomposition behavior of sarin (GB) gas. In this paper, we explore how DMMP interacts with the as-synthesized mesoporous CeO2. Our mass spectroscopy and in situ diffuse reflectance infrared Fourier transform spectroscopy measurements indicate that DMMP can dissociate on mesoporous CeO2 at room temperature. Two DMMP dissociation pathways are observed. Based on our characterization of the as-synthesized material, we built the pristine and hydroxylated (110) and (111) CeO2 surfaces and simulated the DMMP interaction on these surfaces with density functional theory modeling. Our calculations reveal an extremely low activation energy barrier for DMMP dissociation on the (111) pristine CeO2 surface, which very likely leads to the high activity of mesoporous CeO2 for DMMP decomposition at room temperature. The two reaction pathways are possibly due to the DMMP dissociation on the pristine and hydroxylated CeO2 surfaces. The significantly higher activation energy barrier for DMMP to decompose on the hydroxylated CeO2 surface implies that such a reaction on the hydroxylated CeO2 surface may occur at higher temperatures or proceed after the pristine CeO2 surfaces are saturated.

Degradation of Fatal Toxic Nerve Agents on Dry TiO2.

Despite a recent dramatically increased risk of using chemical warfare agents in chemical attacks and assassinations, fundamental interactions of toxic chemicals with other materials are poorly understood, and micromechanisms of their chemical degradation are yet to be established. This represents an outstanding challenge in both fundamental science and practical applications in combat against chemical weapons. One of the most versatile and multifunctional oxides, TiO2, has been suggested as a promising material to quickly adsorb and effectively destroy toxins. In this paper, we explore how sarin (also known as GB) adsorbs and decomposes on dry nanoparticles of TiO2 anatase and rutile phases. We found that both anatase and rutile readily adsorb sarin gas molecules because of a strong electrostatic attraction between the phosphoryl oxygen and surface titanium atoms. The sarin decomposition most likely proceeds via a propene elimination; however, the reaction is exothermic on the rutile (110) surface and endothermic on the anatase (101) surface. High energy barriers suggest that sarin would hardly decompose on pristine dry surfaces of TiO2, and degradation reactions can be triggered by defects or contaminants under realistic operational conditions.