RESUMO
Rational design and synthesis of high-performance electrocatalysts for ethanol oxidation reaction (EOR) is crucial to large-scale commercialization of direct ethanol fuel cells, but it is still an incredible challenge. Herein, a unique Pd metallene/Ti3C2Tx MXene (Pdene/Ti3C2Tx)-supported electrocatalyst is constructed via an in-situ growth approach for high-efficiency EOR. The resulting Pdene/Ti3C2Tx catalyst achieves an ultrahigh mass activity of 7.47 A mgPd-1 under alkaline condition, as well as high tolerance to CO poisoning. In situ attenuated total reflection-infrared spectroscopy studies combined with density functional theory calculations reveal that the excellent EOR activity of Pdene/Ti3C2Tx catalyst is attributed to the unique and stable interfaces which reduce the reaction energy barrier of *CH3CO intermediate oxidation and facilitate oxidative removal of CO poisonous species by increasing the Pd-OH binding strength.
RESUMO
N2O is a common byproduct in the selective catalytic oxidation of ammonia, and its generation often needs to be inhibited due to its strong greenhouse effect. In this paper, using Ag/ZSO-Y as a model catalyst, the N2O selectivity was reduced by 30% through modulation of the electron metal-support interaction. The results demonstrate that the work function of the support can be regulated by the content of the doping element. As the Zr content increases in SnO2, the work function of the support decreases. Moreover, there is a positive correlation between the charge transfer amount and the work function of the support. A series of in situ DRIFTS and density functional theory calculations revealed that the -NO and -N reactions are the primary pathways for N2O formation. By adjustment of the work function of the support through varying the Zr doping level, the electronic structure of Ag NPs was further tuned, resulting in an increased reaction energy barrier for -NO and -N reactions, effectively suppressing N2O formation.
Assuntos
Amônia , Elétrons , Amônia/química , Amônia/metabolismo , Oxirredução , Metais , CatáliseRESUMO
Aiming to improve the photocatalytic activity in N2 fixation to produce ammonia, herein, we proposed a photochemical strategy to fabricate defects, and further deposition of Ru single atoms onto UiO-66 (Zr) framework. Electron-metal-support interactions (EMSI) were built between Ru single atoms and the support via a covalently bonding. EMSI were capable of accelerating charge transfer between Ru SAs and UiO-66, which was favorable for highly-efficiently photocatalytic activity. The photocatalytic production rate of ammonia improved from 4.57â µmol g-1 h-1 to 16.28â µmol g-1 h-1 with the fabrication of defects onto UiO-66, and further to 53.28â µmol g-1 h-1 with Ru-single atoms loading. From the DFT results, it was found that d-orbital electrons of Ru were donated to N2 πâ¶-antibonding orbital, facilitating the activation of the N≡N triple bond. A distal reaction pathway was probably occurred for the photocatalytic N2 reduction to ammonia on Ru1 /d-UiO-66 (single Ru sites decorated onto the nodes of defective UiO-66), and the first step of hydrogenation of N2 was the reaction determination step. This work shed a light on improving the photocatalytic activity via feasibly anchoring single atoms on MOF, and provided more evidences to understand the reaction mechanism in photocatalytic reduction of N2 .
RESUMO
In this study, we loaded Pd catalysts onto a reduced graphene oxide (rGO) support in an atomically dispersed fashion [i.e., Pd single-atom catalysts (SACs) on rGO or Pd1/rGO] via a facile and scalable synthesis based on anchor-site and photoreduction techniques. The as-synthesized Pd1/rGO significantly outperformed the Pd nanoparticle (Pdnano) counterparts in the electrocatalytic hydrodechlorination of chlorinated phenols. Downsizing Pdnano to Pd1 leads to a substantially higher Pd atomic efficiency (14 times that of Pdnano), remarkably reducing the cost for practical applications. The unique single-atom architecture of Pd1 additionally affects the desorption energy of the intermediate, suppressing the catalyst poisoning by Cl-, which is a prevalent challenge with Pdnano. Characterization and experimental results demonstrate that the superior performance of Pd1/rGO originates from (1) enhanced interfacial electron transfer through Pd-O bonds due to the electronic metal-support interaction and (2) increased atomic H (H*) utilization efficiency by inhibiting H2 evolution on Pd1. This work presents an important example of how the unique geometric and electronic structure of SACs can tune their catalytic performance toward beneficial use in environmental remediation applications.
Assuntos
Recuperação e Remediação Ambiental , Paládio , CatáliseRESUMO
Electronic metal-support interactions (EMSI) describe the electron flow between metal sites and a metal oxide support. It is generally used to follow the mechanism of redox reactions. In this study of CuO-CeO2 redox, an additional flow of electrons from metallic Cu to surface carbon species is observed via a combination of operando X-ray absorption spectroscopy, synchrotron X-ray powder diffraction, near ambient pressure near edge X-ray absorption fine structure spectroscopy, and diffuse reflectance infrared Fourier transform spectroscopy. An electronic metal-support-carbon interaction (EMSCI) is proposed to explain the reaction pathway of CO oxidation. The EMSCI provides a complete picture of the mass and electron flow, which will help predict and improve the catalytic performance in the selective activation of CO2 , carbonate, or carbonyl species in C1 chemistry.
RESUMO
OBJECTIVE: For patients with nonlesional refractory focal epilepsy (NLRFE), localization of the epileptogenic zone may be more arduous than for other types of epilepsy and frequently requires information from multiple noninvasive presurgical modalities and intracranial EEG (icEEG). In this prospective, blinded study, the authors assessed the clinical added value of magnetic source imaging (MSI) in the presurgical evaluation of patients with NLRFE. METHODS: This study prospectively included 57 consecutive patients with NLRFE who were considered for epilepsy surgery. All patients underwent noninvasive presurgical evaluation and then MSI. To determine the surgical plan, discussion of the results of the presurgical evaluation was first undertaken while discussion participants were blinded to the MSI results. MSI results were then presented. MSI influence on the initial management plan was assessed. RESULTS: MSI results influenced patient management in 32 patients. MSI results led to the following changes in surgical strategy in 14 patients (25%): allowing direct surgery in 6 patients through facilitating the detection of subtle cortical dysplasia in 4 patients and providing additional concordant diagnostic information to other presurgical workup in another 2 patients; rejection of surgery in 3 patients originally deemed surgical candidates; change of plan from direct surgery to icEEG in 2 patients; and allowing icEEG in 3 patients deemed not surgical candidates. MSI results led to changed electrode locations and contact numbers in another 18 patients. Epilepsy surgery was performed in 26 patients influenced by MSI results and good surgical outcome was achieved in 21 patients. CONCLUSIONS: This prospective, blinded study showed that information provided by MSI allows more informed icEEG planning and surgical outcome in a significant percentage of patients with NLRFE and should be included in the presurgical workup in those patients.
Assuntos
Epilepsia Resistente a Medicamentos/cirurgia , Epilepsias Parciais/cirurgia , Epilepsia/cirurgia , Procedimentos Neurocirúrgicos , Adolescente , Adulto , Criança , Eletroencefalografia/métodos , Humanos , Imageamento por Ressonância Magnética/métodos , Magnetoencefalografia/métodos , Pessoa de Meia-Idade , Procedimentos Neurocirúrgicos/métodos , Adulto JovemRESUMO
The catalytic properties of nanometals are strongly dependent on their electronic states which, are influenced by the interaction with the supports. However, a precise manipulation of the electronic interaction is lacking, and the nature of the interaction is still ambiguous. Herein, using Au/ZnFex Co2- x O4 (x = 0-2) as a model system with continuously tuned Fermi levels of supports, the electronic structure of the Au catalyst can be precisely controlled by changing the Fermi level of the support, which arises from the charge redistribution between the two phases. A higher Fermi level of ZnFe2 O4 support makes nano-Au negatively charged and thus facilitates the oxidation of CO, and in contrast, a lower Fermi level of ZnCo2 O4 support makes nano-Au positively charged and is preferential to the oxidation of benzyl alcohol. This work represents a solid step towards exploration of advanced catalysts with deliberate design of electronic structure and catalytic properties.
RESUMO
Utilizing catalytic combustion to convert methane (CH4) into CO2 and H2O stands as one of the most effective approaches for mitigating unburnt CH4 emissions from natural gas engines. Supported Pd catalysts have been extensively researched for their role in low-temperature CH4 combustion, with their catalytic activity greatly influenced by metal-support interactions. Surface interaction Pd phases, as a special type of Pd species originating from metal-support interactions on supported Pd catalysts, show controversial catalytic performance in CH4 combustion. Moreover, the impact of electronic metal-support interactions (EMSI, which refers to metal-support interactions associated with electron transfer) remains unclear. Hence, we opted for Ce-Zr solid solutions with different Ce:Zr molar ratios as supports and synthesized a range of supported Pd catalysts with varying EMSI intensities. Characterization revealed that as the oxygen vacancy concentration on the support increased, electron transfer weakened, leading to a higher Pd-O-Ce content, resulting in a lower CH4 activation barrier and better catalytic performance. This study offers a promising approach for regulating EMSI and active Pd species on supported catalysts in practical applications.
RESUMO
BACKGROUND: Long-term survival for children diagnosed with cancer exceeds 80%. Notably, premature cardiovascular disease has become the leading non-cancer cause of late mortality among these survivors. METHODS/DESIGN: This randomized controlled trial (RCT; NCT03104543) focuses on adult participants in the Childhood Cancer Survivor Study identified as high risk for ischemic heart disease or heart failure due to their cancer treatment. Participants undergo a home-based evaluation of blood pressure and laboratory tests to determine the prevalence of undiagnosed and/or undertreated hypertension, dyslipidemia, and diabetes. Those with abnormal values are then enrolled in an RCT to test the efficacy of a 12-month personalized, remotely delivered survivorship care plan (SCP) intervention designed to reduce undertreatment of these three target conditions. The intervention approximates a clinical encounter and is based on chronic disease self-management strategies. RESULTS: With a goal of 750, currently 342 out of 742 eligible participants approached have enrolled (46.1%). Initially, we randomized participants to different recruitment strategies, including shorter approach packets and a tiered consent, but did not find significant differences in participation rates (40.7% to 42.9%; pâ¯=â¯.95). Subsequently, slightly greater participation was seen with larger upfront unconditional incentive checks ($50 vs. $25: 50.7% vs. 44.1%; pâ¯=â¯.10). Overall, the financial impact of the $50 upfront incentive was cost neutral, and possibly cost-saving, vs. a $25 upfront incentive. CONCLUSION: The overall study will determine if a National Academy of Medicine-recommended SCP intervention can improve cardiovascular outcomes among long-term survivors of childhood cancer. Modifications to the recruitment strategy may improve participation rates over time.