A Zwitterionic Hydrogel-Based Heterogeneous Fenton Catalyst for Water Treatment.

Persistent organic pollutants (POPs), including xenoestrogens and polyfluoroalkyl substances (PFAS), demand urgent global intervention. Fenton oxidation, catalyzed by iron ions, offers a cost-effective means to degrade POPs. However, numerous challenges like acid dependency, catalyst loss, and toxic waste generation hinder practical application. Efforts to create long-lasting heterogeneous Fenton catalysts, capable of simultaneously eliminating acid requirements, sustaining rapid kinetics, and retaining iron efficiently, have been unsuccessful. This study introduces an innovative heterogeneous zwitterionic hydrogel-based Fenton catalyst, surmounting these challenges in a cost-effective and scalable manner. The hydrogel, hosting individually complexed iron ions in a porous scaffold, exhibits substantial effective surface area and kinetics akin to homogeneous Fenton reactions. Complexed ions within the hydrogel can initiate Fenton degradation at neutral pH, eliminating acid additions. Simultaneously, the zwitterionic hydrogel scaffold, chosen for its resistance to Fenton oxidation, forms strong bonds with iron ions, enabling prolonged reuse. Diverging from existing designs, the catalyst proves compatible with UV-Fenton processes and achieves rapid self-regeneration during operation, offering a promising solution for the efficient and scalable degradation of POPs. The study underscores the efficacy of the approach by demonstrating the swift degradation of three significant contaminants-xenoestrogens, pesticides, and PFAS-across multiple cycles at trace concentrations.

Glycoxidation of mammalian whole histone generates highly immunogenic aggregates: Sera of SLE patients contain autoantibodies against aggregates.

Non-enzymatic glycation and oxidation of self-proteins, causing formation and accumulation of advanced glycation end products (AGEs), have been reported in an array of pathologies, including systemic lupus erythematosus (SLE). Such modifications may generate neo-epitopes, break immunological tolerance, and induce antibody response. In this study, we have first analysed the structural modifications of whole histone in the presence of deoxyribose followed by oxidation with hydroxyl radicals. Changes in the secondary and tertiary structure of the whole histone were determined by spectroscopic techniques and biochemical assays. Fluorescence spectroscopy and UPLC-MS showed the generation of AGEs such as carboxymethyl lysine and pentosidine, while DLS and TEM indicated the presence of amorphous AGE-aggregates. Moreover, rabbits immunized with these histone-AGEs exhibited enhanced immunogenicity and ELISA and western immunoblot of IgG antibodies from SLE patients' sera showed a significantly higher specificity towards modified histone-AGEs than the native histone.

Hyphenated Fenton-column packed nMnO-modified wood biochar for tannery effluent treatment: Adsorption mechanism and reusability study.

Industrial wastewater contains a wide range of pollutants that, if released directly into natural ecosystems, have the potential to pose serious risks to the environment.This study aims to investigate sustainable and efficient approaches for treating tannery wastewater, employing a combination of hyphenated Fenton oxidation and adsorption processes. Rigorous analyses were conducted on wastewater samples, evaluating parameters like COD, sulphide, NH3-N, PO43-, NO3-, and Cr(VI). The performance of this adsorbent material was gauged through column adsorption experiments. A comprehensive characterization of the adsorbent was undertaken using techniques such as SEM, EDX, BET, FTIR, XRD, and LIBS. The study delved into varying operational parameters like bed depth (ranging from 3.5 to 9.5 cm) diameter (2.5 cm) and influent flow rate (ranging from 5 to 15mLmin-1). The experimental outcomes revealed that increasing the bed depth and decreasing the influent flow rate significantly bolstered the adsorption column's effectiveness. Breakthrough curves obtained were fitted with different models, including the Thomas and Yoon-Nelson models. The most optimal column performance was achieved with a bed height of 10.5 cm and a flow rate of 5mLmin-1. The combined process achieved removal efficiencies of 94.5% for COD, 97.4% for sulphide, 96.2% for NH3-N, 83.1% for NO3-, 79.3% for PO43-, and 96.9% for Cr(VI) in tannery effluent. This research presents a notable stride toward the development of sustainable and efficient strategies for tannery wastewater treatment.

Novel combination of iron-carbon composite and Fenton oxidation processes for high-concentration antibiotic wastewater treatment.

The research presented herein explores the development of a novel iron-carbon composite, designed specifically for the improved treatment of high-concentration antibiotic wastewater. Employing a nitrogen-shielded thermal calcination approach, the investigation utilizes a blend of reductive iron powder, activated carbon, bentonite, copper powder, manganese dioxide, and ferric oxide to formulate an efficient iron-carbon composite. The oxygen exclusion process in iron-carbon particles results in distinctive electrochemical cells formation, markedly enhancing wastewater degradation efficiency. Iron-carbon micro-electrolysis not only boosts the biochemical degradability of concentrated antibiotic wastewater but also mitigates acute biological toxicity. In response to the increased Fe2+ levels found in micro-electrolysis wastewater, this research incorporates Fenton oxidation for advanced treatment of the micro-electrolysis byproducts. Through the synergistic application of iron-carbon micro-electrolysis and Fenton oxidation, this research accomplishes a significant decrease in the initial COD levels of high-concentration antibiotic wastewater, reducing them from 90,000 mg/L to about 30,000 mg/L, thus achieving an impressive removal efficiency of 66.9%. This integrated methodology effectively reduces the pollutant load, and the recycling of Fe2+ in the Fenton process additionally contributes to the reduction in both the volume and cost associated with solid waste treatment. This research underscores the considerable potential of the iron-carbon composite material in efficiently managing high-concentration antibiotic wastewater, thereby making a notable contribution to the field of environmental science.

Fenton-conditioning of landfill leachate biological sludge enables biochar for efficient Cr(â ¥)removal: Occurrence of oxygen-centered free radicals.

Fenton-conditioning is commonly used to improve dewatering ability for municipal biological sludge, however, its application in industries is scarce. In this study, biochar (FT-BC) was successfully synthesized from a Fenton-conditioned landfill leachate biological sludge under oxygen-limited. As compared to the corresponding blank and poly ferric-pretreated biochars (BC and PF-BC), moderate Fenton conditioning of the sludge could enable good removal performance for Cr (Ⅵ) by FT-BC. It was found that the oxygen central free radicals (OCFRs) on the biochar surface was intensively promoted due to Fenton electrophilic addition of ·OH onto the oxygen-containing functional groups in biomass. The amounts of OCFRs correlated positively well with the removal efficiency, indicating these persistent free radicals (PFRs)would mainly responsible for the reductive immobilization of Cr(VI)on the FT-BC surface. This study is expected to provide a new method for reclamation of industrial biological sludges with poor agglomeration by introducing simple Fenton pre-conditioning.

Synthesis of 3D Sb2O3-based heterojunction reinforced by SPR effect and photo-Fenton mechanism for upgraded oxidation of metronidazole in water environments.

The traditional homogenous and heterogenous Fenton reactions have frequently been restrained by the lower production of Fe2+ ions, which significantly obstructs the generation of hydroxyl radicals from the decomposition of H2O2. Thus, we introduce novel photo-Fenton-assisted plasmonic heterojunctions by immobilizing Fe3O4 and Bi nanoparticles onto 3D Sb2O3 via co-precipitation and solvothermal approaches. The ternary Sb2O3/Fe3O4/Bi composites offered boosted photo-Fenton behavior with a metronidazole (MNZ) oxidation efficiency of 92% within 60 min. Among all composites, the Sb2O3/Fe3O4/Bi-5% hybrid exhibited an optimum photo-Fenton MNZ reaction constant of 0.03682 min- 1, which is 5.03 and 2.39 times higher than pure Sb2O3 and Sb2O3/Fe3O4, respectively. The upgraded oxidation activity was connected to the complementary outcomes between the photo-Fenton behavior of Sb2O3/Fe3O4 and the plasmonic effect of Bi NPs. The regular assembly of Fe3O4 and Bi NPs enhances the surface area and stability of Sb2O3/Fe3O4/Bi. Moreover, the limited absorption spectra of Sb2O3 were extended into solar radiation by the Fe3+ defect of Fe3O4 NPs and the surface plasmon resonance (SPR) effect of Bi NPs. The photo-Fenton mechanism suggests that the co-existence of Fe3O4/Bi NPs acts as electron acceptor/donor, respectively, which reduces recombination losses, prolongs the lifetime of photocarriers, and produces more reactive species, stimulating the overall photo-Fenton reactions. On the other hand, the photo-Fenton activity of MNZ antibiotics was optimized under different experimental conditions, including catalyst loading, solution pH, initial MNZ concentrations, anions, and real water environments. Besides, the trapping outcomes verified the vital participation of •OH, h+, and •O2- in the MNZ destruction over Sb2O3/Fe3O4/Bi-5%. In summary, this work excites novel perspectives in developing boosted photosystems through integrating the photocatalysis power with both Fenton reactions and the SPR effects of plasmonic materials.

Sustainable and Reagentless Fenton Treatment of Complex Wastewater.

Conventional Fenton treatment is fundamentally impractical for large-scale applications, as the consumption of Fe(II), H2O2, and pH regulators and the accumulation of iron hydroxide sludge are very costly. This paper describes a new method for Fenton treatment of complex wastewater without additional dosing of Fe(II) and H2O2, without iron-sludge accumulation, and with less consumption of pH regulators, using a novel bioelectrode system. Our new system includes a novel three-chamber microbial electrolysis unit and Fenton reaction unit, where Fenton reagents are generated by biotic and abiotic cathodes, while the bioanode simultaneously degrades biodegradable organics from the wastewater. The system's self-alkalinity buffering also waives the need for pH regulators. Dissolved organic carbon and 22 specific recalcitrant organics were removed by 99% and between 78 and 100%, respectively. The bioelectrode system generated 13 ± 3 mg/L dissolved Fe(II) and 5 ± 0.4 mg/L H2O2 for the Fenton reaction unit. The closed iron cycle avoided iron loss and iron sludge accumulation during operation. The pH regulator dosage and operating costs were just 9.7 and 1.4%, respectively, of what is required by classic Fenton. The low operating cost and reduction in chemical usage make it an efficient, sustainable alternative to the conventional treatment processes currently used for complex wastewater.

Preparation of hydrochar bio-based catalyst for fenton process in dye-containing wastewater treatment.

The use of synthetic dyes in the textile industry pollutes a huge amount of water. Thus, wastewater discharged from many textile companies to the receiving environment without being treated causes serious environmental and human health problems. The development of new techniques has become imperative. In this study, it was aimed to remove anionic dye (RR180) and cationic dye (BR18) by Fenton-like and adsorption process with hydrochars obtained from laurel leaves and watermelon peels. In the comparison of the adsorption and Fenton-like processes used in the dye removal of the produced bio-based materials, the Fenton-like process was selected in order to enhance the highest removal efficiency. The effects of various operating factors such as solution pH, amount of catalysts, hydrogen peroxide (H2O2) concentration, and initial dye concentration were evaluated on both dyes removal. The experimental results demonstrated that 99.8% RR180 dye and 98.8% BR18 dye removal efficiency were observed for an initial dye concentration of 100 mg/L with an adsorbent concentration of 1 g/L, H2O2 concentration of 15 µL/L, and optimum pH at the end of 60 min of reaction time. It was observed that an increase in initial dye concentration caused to decrease the dye removal efficiency. The optimum pH for the highest RR180 and BR18 dye removal was 4 and 6, respectively. It was observed that the increase in H2O2 concentration in the solution also decreased the dye removal efficiency. It turned out that catalysts obtained from hydrochars are an effective process for the high removal performance of cationic and anionic dyes.

Disinfection of treated urban effluents for reuse by combination of coagulation/flocculation and Fenton processes.

In this study, a combination of coagulation/flocculation and Fenton processes was studied as tertiary treatment in order to generate treated water susceptible to reuse. The combination of both processes has never been applied in disinfection of real urban wastewater. The best removals of turbidity and enterobacteria were achieved when applying a coagulant (FeCl3) dosage of 120 mg/L and the natural pH of the effluent (7.14). The following Fenton reaction presented the maximal enterobacteria inactivation after 120 min at 25 °C, when using hydrogen peroxide and added iron concentrations of 100 mg/L and 7 mg/L, respectively. The abundance of antibiotic resistant (amoxicillin and sulfamethoxazole) enterobacteria and total enterobacteria, enterococci, and heterotrophs, and antibiotic resistance genes - ARG - (sul1, blaTEM and qnrS) was evaluated before and after each step of the treatment. Values below 10 CFU/100 mL were achieved for total and resistant cultivable enterobacteria immediately after treatment and after storage for 72 h, therefore meeting the strictest limit imposed for E. coli. Physico-chemical parameters also met the established limits for water reuse. Despite harbouring a rich and diverse bacterial community, the final stored disinfected wastewater contained high relative abundance of potentially hazardous bacteria. Such results point out the need of a deep microbiological characterization of treated wastewater to evaluate the risk of its reuse in irrigation.

PAHs remediation from hazardous waste landfill leachate using fenton, photo - fenton and electro - fenton oxidation processes - performance evaluation under optimized conditions using RSM and ANN.

Polycyclic aromatic hydrocharbons (PAHs) are a class of highly toxic pollutants that are highly detrimental to the ecosystem. Landfill leechate emanated from municipal solid waste are reported to constitute significant PAHs. In the present investigation, three Fenton proceses, namely conventional Fenton, photo-fenton and electro-fenton methods have been employed to treat landfill leehcate for removing PAHs from a waste dumpig yard. Response surface methodology (RSM) and artificial neural network (ANN) methodologies were adopted to optimize and validate the conditions for optimum oxidative removal of COD and PAHs. The statistical analysis results showed that all independent variables chosen in the study are reported to have significant influence of the removal effects with P-values <0.05. Sensitivity analysis by the developed ANN model showed that the pH had the highest significance of 1.89 in PAH removal when compared to the other parameters. However for COD removal, H2O2 had the highest relative importance of 1.15, followed by Fe2+ and pH. Under optimal treatment conditions, the photo-fenton and electro-fenton processes showed better removal of COD and PAH compared to the Fenton process. The photo-fenton and electro-fenton treatment processes removed 85.32% and 74.64% of COD and 93.25% and 81.65% of PAHs, respectively. Also the investigations revelaed the presence of 16 distinct PAH compunds and the removal percentage of each of these PAHs are also reported. The PAH treatment research studies are generally limited to the assay of removal of PAH and COD levels. In the present investigation, in addition to the treatment of landfill leachate, particle size distribution analysis and elemental characterization of the resultant iron sludge by FESEM and EDX are reported. It was revealed that elemental oxygen is present in highest percentage, followed by iron, sulphur, sodium, chlorine, carbon and potassium. However, iron percentage can be reduced by treating the Fenton-treated sample with NaOH.

An extra-chelator-free fenton process assisted by electrocatalytic-induced in-situ pollutant carboxylation for target refractory organic efficient treatment in chemical-industrial wastewater.

For traditional Fenton processes, the quenching behavior of radical contenders (e.g., most aliphatic hydrocarbons) on hydroxyl radicals (·OH) usually hinders the removal of target refractory pollutants (aromatic/heterocyclic hydrocarbons) in chemical industrial wastewater, leading to excess energy consumption. Herein, we proposed an electrocatalytic-assisted chelation-Fenton (EACF) process, with no extra-chelator addition, to significantly enhance target refractory pollutant (pyrazole as a representative) removal under high ·OH contender (glyoxal) levels. Experiments and theoretical calculations proved that superoxide radical (·O2-) and anodic direct electron transfer (DET) effectively converted the strong ·OH-quenching substance (glyoxal) to a weak radical competitor (oxalate) during the electrocatalytic oxidation process, promoting Fe2+ chelation and therefore increasing radical utilization for pyrazole degradation (reached maximum of ∼43-fold value upon traditional Fenton), which appeared more obviously in neutral/alkaline Fenton conditions. For actual pharmaceutical tailwater treatment, the EACF achieved 2-folds higher oriented-oxidation capability and ∼78% lower operation cost per pyrazole removal than the traditional Fenton process, demonstrating promising potential for future practical applications.

Microbial fuel cell coupled Fenton oxidation for the cathodic degradation of emerging contaminants from wastewater: Applications and challenges.

Urbanization and industrialization have resulted in the escalation of the occurrence of emerging contaminants (EC) in the wastewater and ultimately to the receiving water bodies due to their bio-refractory nature. The presence of ECs in the water bodies adversely affects all three domains of life, viz. bacteria, archaea and eukaryotes, and eventually the ecosystem. Fenton oxidation is one of the most suitable method that is capable of degrading a variety of ECs by employing a strong oxidizing agent in the form of •OH. The coupling of Fenton oxidation with microbial fuel cell (MFC) offers benefits, such as low-cost, minimal requirement of external energy, and in-situ generation of oxidizing agents. The resulting system, termed as bio-electro-Fenton MFC (BEF-MFC), is capable of degrading the ECs in the cathodic chamber, while harvesting bioelectricity and simultaneously removing oxidizable organic matter from wastewater in the anodic chamber. This review discusses the applications of BEF-MFC for the treatment of dyes, pharmaceuticals, pesticides, and real complex wastewaters. Additionally, the effect of operating conditions on the performance of BEF-MFC are elaborated and emphasis is also given on possible future direction of research that can be adopted in BEF-MFC in the purview of up-scaling.

Comparison of kinetics and costs of Fenton and photo-Fenton processes used for the treatment of a textile industry wastewater.

In this study, the treatment of textile industrial wastewater by Fenton and Photo-Fenton oxidation processes was investigated. For this purpose, the pH, Fe2+ and H2O2 concentrations with the best organic matter and color removal were determined in the Fenton process and comparison with Fenton was made by Photo-Fenton oxidation at the optimal Fe2+/H2O2 ratio. The influent COD and TOC values of the wastewater used in the study were 848 mg/L and 253 mg/L, respectively. With the Fenton process, the best organic matter and color removal was obtained at pH 3, at 200 mg/L Fe2+ and 300 mg/L H2O2 concentrations. Under these conditions, 88.9% COD, 84.2% TOC and over 97% color removal were obtained with Fenton oxidation, and 93.2% COD, 88.9% TOC and 98% color were obtained with Photo-Fenton oxidation. However, when Fe2+ and H2O2 amounts were reduced to 50 mg/L and 75 mg/L, both organic matter and color removal were reduced with Fenton process, while higher organic matter removal and color removal were achieved with Photo-Fenton process. The total cost was changed between 9.56-16.88 €/m3 and 13.46-20.13 €/m3 with Fenton and Photo-Fenton oxidation process for all Fe2+/H2O2 ratios, respectively. With the Photo-Fenton oxidation process, higher organic matter removal was obtained at optimum Fe2+ and H2O2 concentrations. In addition, less Fe2+ and H2O2 chemicals were used in Photo-Fenton oxidation process to achieve the same removal efficiency compared to the Fenton oxidation process.

Evaluation of iron-loaded granular activated carbon used as heterogeneous fenton catalyst for degradation of tetracycline.

To optimize the efficiency of general adsorption-Fenton oxidation treatment, iron-loaded granular activated carbon (Fe-GAC) was prepared, characterized, and used as a catalyst in the heterogeneous Fenton oxidation of tetracycline (TC). Characterization revealed that the Fe(II) was successfully introduced onto the original granular activated carbon (GAC) and diversified the materials' surface morphology and elemental compounds. Under an initial pH of 3.0, the Fe-GAC/Fenton system obtained a maximum removal rate of 92.6%, with hydrogen peroxide (H2O2) dosages of 9 mmol g-1. And the GAC/Fenton without iron supplementation was 89.5%, with H2O2 dosages of 8 mmol g-1. Additionally, the Fe-GAC/Fenton system consumed a lower Fe(II) dosage than GAC/Fenton, with Fe(II)/H2O2 molar ratios of 0.007:1 and 0.04:1, respectively. Analysis of total organic carbon demonstrated higher mineralization efficiency in the Fe-GAC/Fenton system (67.2%), which was approximately 1.3 times of GAC/Fenton. Desorption experiments showed that the adsorption and degradation accounted for 19.22% and 80.78% of the total TC removal by GAC/Fenton, and 10.58% and 89.42% in the Fe-GAC/Fenton system, respectively. Electron paramagnetic resonance (EPR) technique and quenching experiments demonstrated that the dominant reactive oxygen species (ROS) in synergistic treatments were hydroxyl (•OH) and hydroxy peroxyl (HO2•) radicals. In addition, three potential degradation pathways for TC were proposed according to the detected fourteen intermediates. Catalyst regeneration treatments were evaluated over six cycles, and the regeneration was 6.5% higher with the iron-supplemented carbon granules. Overall, the Fe-GAC can be used as an efficient catalyst in practical water treatment, and this study demonstrated a promising method to develop adsorption-Fenton technology.

Photo-degradation of sugar processing wastewater by copper doped bismuth oxyiodide: Assessment of treatment performance and kinetic studies.

In this study, photo-Fenton-like oxidation method was evaluated for synthetic sugar industry wastewater using visible-light driven Cu-BiOI photocatalyst. Reaction conditions including initial pH, catalyst loading, initial hydrogen peroxide (H2O2) concentration, and temperature, were optimized. At these optimized conditions, the total saccharide concentration (TSC) and total organic carbon (TOC) removals were 56.20% and 30.67%, respectively whereas the maximum TSC and TOC removal reached up to 93.35% and 74.72% respectively by decreasing initial sucrose concentration. The kinetic study showed that the reaction order for sucrose and TOC oxidation was determined as 2 for pseudo-homogeneous power law models with respect to sucrose concentration and TOC, respectively.For heterogeneous models, Langmuir-Hinshelwood model based on the mechanism of adsorbed pollutant and oxidant on different catalytic sites was the best fit for oxidation of sucrose and other organic intermediates. According to the catalyst characterization studies, incorporation of copper was successful and Cu-BiOI possesses high photocatalytic activity accomplished by acid-assisted synthesis method.

Advanced treatment of chicken farm flushing wastewater by integrating Fenton oxidation and algal cultivation process for algal growth and nutrients removal.

Algae based wastewater treatment has been considered as the most promising win-win strategy for nutrients removal and biomass accumulation. However, the poor linking between traditional wastewater treatment and algal cultivation limits the achievement of this goal. In this study, a novel combination of Fenton oxidation and algal cultivation (CFOAC) system was investigated for the treatment of chicken farm flushing wastewater (CFFW). Fenton oxidation (FO) was adopted to reduce the excessive ammonia nitrogen, which might inhibit the algal growth. The results showed that single FO pretreatment removed 70.5 %, 96.7 %, 86.1 %, and 96.2 % of TN, TAN, TP, and COD, respectively. The highest biomass (235.8 mg/L/d) and lipid (77.3 mg/L/d) productivities were achieved on optimized CFOAC system after 7 days batch cultivation. Accordingly, the nutrients removal efficiencies increased to almost 100 %. Further fatty acid profile analysis showed that algae grown on optimal CFOAC system accumulated a high level of total lipids (32.8 %) with C16-C18 fatty acid as the most abundant compositions (accounting for over 60.6 %), which were propitious to biodiesel production. In addition, this CFOAC system was magnified from 1 L flask to 50 L horizontal pipe photobioreactor (HPPB) in semi-continuously culture under optimal conditions. The average biomass and lipid productivities were 995.7 mg/L/d and 320.6 mg/L/d, respectively, when cultured at 6 days hydraulic retention time with 1/3 substitution every two days. These findings proved that the novel CFOAC system is efficient in nutrients removal, algal cultivation, and biomass production for advanced treatment of CFFW.

Optimization of Fenton process for removing TOC and color from swine wastewater using response surface method (RSM).

The Fenton oxidation process was applied to biologically treated swine wastewater (BSWW) for the removal of TOC and color constituents after coagulation with FeCl3. Optimizing of operational variables such as FeSO4 and H2O2 doses was achieved by the response surface method (RSM). Statistical analysis led to the conclusion that FeSO4 is the more important than H2O2 in the removal of TOC. However, H2O2 plays a more significant role than FeSO4 in color removal. The optimal conditions for effective removal of TOC and color from swine wastewater were derived by using process optimization. The experimental results show that overall removal of TOC and color is 76.7% and 98%, respectively, when optimal conditions of 800 mg/L (FeSO4) and 5207 mg/L (H2O2) at 120 min were used. Furthermore, the optimization model produces a desirability value of 0.980 that verifies the optimal conditions. Finally, it is observed that removal of undesirable compounds follows a pseudo-first order and pseudo-second order kinetics model with high R2 values of 0.99 for both TOC and color removal, respectively. Statistical analysis and process optimization show that the employed model may determine conditions conducive to the effective removal of TOC and color from swine wastewater.

Effective removal of polymer quaternary ammonium salt by biodegradation and a subsequent Fenton oxidation process.

In this paper, a process combining biodegradation and Fenton oxidation was proposed for the removal of polydiallyldimethylammonium chloride-acrylic-acrylamide-hydroxyethyl acrylate (PDM) in aqueous phase. Biodegradation of PDM was investigated in activated sludge systems, and the effects of the solution pH, mixed liquid suspended solids (MLSS), salinity, co-substrate, and initial substrate concentration, were studied. The biodegradation process was well-described with the Monod model and the values of the kinetics parameters vmax, ks were 0.05 h-1 and 333 mg/L. The optimal biodegradation conditions in the experimental range were determined to be: pH = 7.0, 0%-0.01% (w/v) NaCl, 4000 mg/L of MLSS, and 500 mg/L of glucose as co-substrate. FT-IR analysis indicated that PDM molecules biodegradation partly. The microbial community structures and dehydrogenase activity analysis revealed that PDM showed some toxicity to microorganisms in activated sludge. The effects of several parameters, including the pH and chemical doses, were investigated for removing PDM in Fenton oxidation process. The optimal Fenton oxidation process conditions in the experimental range were pH = 2.0, Fe2+ concentration of 40 mg/L, and H2O2 dosage of 23 mL/L. PDM was treated by biodegradation and subsequent Fenton oxidation under the optimal operating conditions. The removal efficiency was 44.5% after the biodegradation process and further increased to 85.5% after Fenton oxidation. The combined process was revealed to be a promising solution for achieving effective and economical removal of PDM.

A bibliometric study of the Fenton oxidation for soil and water remediation.

Fenton based treatments have received tremendous attention in the recent decades as viable strategies for soil and water remediation. There exist different processes associated to the Fenton oxidation. Efficiency, reaction chemistry, and environmental consequences of these processes vary according to the iron (Fe) activation techniques such as soluble Fe(II) (homogeneous Fenton process), soluble Fe(II) and chelating agent (modified-Fenton), Fe minerals or solids (heterogeneous Fenton), iron and UV light (photo-Fenton) and electro-Fenton oxidation. Despite immense amount of research articles and reviews related to the Fenton oxidation, no bibliometric study of this topic has been published to our knowledge. Bibliometric studies provide a useful means to track research output and scholarly trends in a field. Here, we conducted a bibliometric study of the publications on this theme (>4000 documents) published during the past three decades available from the Science Citation Index Expanded (SCI-EXPANDED) database of the Web of Science Core Collection (Clarivate Analytics). Based on the bibliometric analysis of 4349 documents, various essential research indicators were described such as the type and language of publications, the most prominent authors in this theme, the most impactful articles, research categories, journals, institutions, and the countries, that have made the greatest contribution to this theme along with potential research hotspots. This bibliometric study allowed visualization of the current landscape and future trends in this field to facilitate the future collaborative research and exchange of knowledge.

Feasibility analysis of homogenizer coupled solar photo Fenton process for waste activated sludge reduction.

In this study, an attempt has been made to reduce the sludge using novel homogenizer coupled solar photo Fenton (HPF) process. At an optimum pH of 3 and Fe2+ to H2O2 dosage of 1:6, PF process yielded 63.7% solids reduction at a time interval of 45 min. Coupling of homogenizers with photo Fenton (PF) process effectively enhanced treatment efficiency. When homogenizer (specific energy - 1150.694 kJ/kg TS) was coupled with PF, a sharp increase in solid reduction 73.5% and decrease in reaction time (20 min) were observed. Cost benefit analysis revealed the efficiency of HPF process and achieved a net cost of 15.59 USD whereas PF achieved a negative net cost of -82.69 USD. Based on the above study it can be concluded that coupling of homogenizers with PF not only increased its efficiency but also make it field applicable.