Uncoordinated chemistry enables highly conductive and stable electrolyte/filler interfaces for solid-state lithium-sulfur batteries.

Composite-polymer-electrolytes (CPEs) embedded with advanced filler materials offer great promise for fast and preferential Li+ conduction. The filler surface chemistry determines the interaction with electrolyte molecules and thus critically regulates the Li+ behaviors at the interfaces. Herein, we probe into the role of electrolyte/filler interfaces (EFI) in CPEs and promote Li+ conduction by introducing an unsaturated coordination Prussian blue analog (UCPBA) filler. Combining scanning transmission X-ray microscope stack imaging studies and first-principle calculations, fast Li+ conduction is revealed only achievable at a chemically stable EFI, which can be established by the unsaturated Co-O coordination in UCPBA to circumvent the side reactions. Moreover, the as-exposed Lewis-acid metal centers in UCPBA efficiently attract the Lewis-base anions of Li salts, which facilitates the Li+ disassociation and enhances its transference number (tLi+). Attributed to these superiorities, the obtained CPEs realize high room-temperature ionic conductivity up to 0.36 mS cm-1 and tLi+ of 0.6, enabling an excellent cyclability of lithium metal electrodes over 4,000 h as well as remarkable capacity retention of 97.6% over 180 cycles at 0.5 C for solid-state lithium-sulfur batteries. This work highlights the crucial role of EFI chemistry in developing highly conductive CPEs and high-performance solid-state batteries.

PVDF-HFP Based, Quasi-Solid Nanocomposite Electrolytes for Lithium Metal Batteries.

Composite polymer electrolytes are systems of choice for future solid-state lithium metal batteries (LMBs). Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) is among the most interesting matrices to develop new generation quasi-solid electrolytes (QSEs). Here it is reported on nanocomposites made of PVDF-HFP and pegylated SiO2 nanoparticles. Silica-based hybrid nanofillers are obtained by grafting chains of poly(ethylene glycol) methyl ether (PEG) with different molecular weight on the surface of silica nanoparticles. The functionalized nanofiller improves the mechanical, transport and electrochemical properties of the QSEs, which show good ionic conductivity values and high resistance against dendrite penetration, ensuring boosted long and safe device operation. The most promising result is obtained by dispersing 5 wt% of SiO2 functionalized with short PEG chains (PEG750, Mw = 750 g mol-1) in the PVDF-HFP matrix with an ease solvent-casting procedure. It shows ionic conductivity of 0.1 mS cm-1 at 25 °C, more than 250 h resistance to stripping/plating, and impressive results during cycling tests in LMB with LiFePO4 cathode.

Implications for cumulative and prolonged clinical improvement induced by cross-linked hyaluronic acid: An in vivo biochemical/microscopic study in humans.

In photoaged human skin, type I collagen fragmentation impairs dermal extracellular matrix (ECM) integrity, resulting in collapsed/contracted fibroblasts with reduced type I procollagen synthesis. Injections of cross-linked hyaluronic acid (CL-HA) reverse these deleterious changes. To investigate the time course and effects of biochemical changes induced by injected CL-HA, particularly whether fibroblast activation leads to accumulation/deposition of dermal collagen, we injected CL-HA into photoaged skin of human participants over 60 years-old and performed biochemical/microscopic analyses of skin samples. Beginning 1 week post-injection and lasting 6-9 months, fibroblasts exhibited activation, including increased immunostaining and gene expression of markers of type I collagen synthesis, such as heat shock protein 47 and components of the transforming growth factor-ß pathway. At 1 week post-injection, multiphoton microscopy revealed elongation/stretching of fibroblasts, indicating enhanced dermal mechanical support. At 4 weeks, second-harmonic generation microscopy revealed thick collagen bundles densely packed around pools of injected CL-HA. At 12 months, accumulation of thick collagen bundles was observed and injected CL-HA remained present in substantial amounts. Thus, by occupying space in the dermal ECM, injected CL-HA rapidly and durably enhances mechanical support, stimulating fibroblast elongation and activation, which results in thick, densely packed type I collagen bundles accumulating as early as 4 weeks post-injection and continuing for at least a year. These observations indicate that early and prolonged clinical improvement following CL-HA injection results from space-filling and collagen deposition. As type I collagen has an estimated half-life of 15 years, our data provide the foundations for optimizing the timing/frequency of repeat CL-HA injections.

Reticulated livedoid skin patterns after soft-tissue filler-related vascular adverse events.

BACKGROUND: For the treatment of vascular adverse events caused by filler injections, duplex ultrasound imaging may be used. The findings of duplex ultrasound examination and the clinical features of reticulated livedoid skin patterns were compared with the hemifaces anatomy. OBJECTIVE: The objective of this study was to link the reticulated livedoid skin patterns to the corresponding duplex ultrasound findings and the facial perforasomes. METHODS: Duplex ultrasound imaging was used for the diagnosis and treatment of vascular adverse events. The clinical features and duplex ultrasound findings of 125 patients were investigated. Six cadaver hemifaces were examined to compare the typical livedo skin patterns with the vasculature of the face. RESULTS: Clinically, the affected skin showed a similar reticulated pattern in each facial area corresponding with arterial anatomy and their perforators in the cadaver hemifaces. With duplex ultrasound, a disturbed microvascularization in the superficial fatty layer was visualized. After hyaluronidase injection, clinical improvement of the skin pattern was seen. Normalization of blood flow was noted accompanied by restoration of flow in the corresponding perforator artery. The skin patterns could be linked to the perforators of the superficial fat compartments. CONCLUSION: The livedo skin patterns seen in vascular adverse events may reflect the involvement of the perforators.

Pressure alopecias: A review.

Pressure-induced alopecias (PAs) are an infrequent group of scarring and nonscarring alopecias that occur after ischemic obstruction of capillaries that leads to circumscribed areas of hair loss. Initially described after prolonged surgeries or immobilization, type 1 PA occurs after sustained external pressure to the skin, mainly the scalp prominences. Alopecia induced by cosmetic procedures, referred in this review as type 2 PA, is reported with increased frequency in literature and predominantly emerges from pressure exerted by the volume of injectables. It is important to differentiate type 2 PA from vascular occlusion-induced alopecia because they represent distinct entities. Clinically, PA may present with erythema, swelling, and tenderness; however, alopecia might be the sole manifestation. Crusts and ulceration are associated with a worse outcome and a higher risk of scarring alopecia. Prompt diagnosis is paramount to prevent complications. Trichoscopy, although considered nonspecific, may provide relevant clues for an accurate diagnosis. Hair regrows in most cases, but prognosis depends on ischemia severity and timely treatment with reperfusion therapies or mobilization. Treatment of hair loss is usually not necessary because the disease in most cases is self-limited and reversible. The role of topical minoxidil and corticosteroids remains unknown.

An evaluation of the effectiveness of 'ULTRACOL 200' in enhancing nasolabial fold wrinkles through cutaneous repair.

BACKGROUND: Injectable filler, a nonsurgical beauty method, has gained popularity in rejuvenating sagging skin. In this study, polydioxanone (PDO) was utilized as the main component of the ULTRACOL200 filler that helps stimulate collagenesis and provide skin radiant effects. The study aimed to evaluate and compare the effectiveness of ULTRACOL200 with other commercialized products in visually improving dermatological problems. METHODS: Herein, 31 participants aged between 20 and 59 years were enrolled in the study. 1 mL of the testing product, as well as the quantity for the compared groups was injected into each participants face side individually. Subsequently, skin texture and sunken volume of skin were measured using ANTERA 3D CS imaging technology at three periods: before the application, 4 weeks after the initial application, and 4 weeks after the 2nd application of ULTRACOL200. RESULTS: The final results of skin texture and wrinkle volume evaluation consistently demonstrated significant enhancement. Consequently, subjective questionnaires were provided to the participants to evaluate the efficacy of the testing product, illustrating satisfactory responses after the twice applications. CONCLUSION: The investigation has contributed substantially to the comprehension of a PDO-based filler (ULTRACOL200) for skin enhancement and provided profound insight for future clinical trials.

Skin boosters: Definitions and varied classifications.

BACKGROUND: The concept of "skin boosters" has evolved, marking a shift from traditional uses of hyaluronic acid (HA) fillers primarily for augmenting skin volume to a more diverse application aimed at improving dermal conditions. Restylane Vital and other HA fillers have been repurposed to combat skin aging and wrinkles by delivering HA directly to the dermis. OBJECTIVES: This review aims to define the term "skin booster" and to discuss the various components that constitute skin boosters. It seeks to provide a comprehensive overview of the different ingredients used in skin boosters, their roles, and their impact on enhancing dermal conditions. METHODS: A comprehensive review was conducted, focusing on representative skin booster ingredients. The approach involved analyzing the different elements used in skin boosters and their specific roles in enhancing dermal improvement. RESULTS: The findings indicate that skin boosters, encompassing a range of ingredients, are effective in improving the condition of the skin's dermis. The review identifies key ingredients in skin boosters and their specific benefits, including hydration, elasticity improvement, and wrinkle reduction. CONCLUSIONS: Skin boosters represent a significant development in dermatological treatments, offering diverse benefits beyond traditional HA fillers. This review provides valuable insights into the constituents of skin boosters and their effectiveness, aiding readers in making informed decisions about these treatments. The potential of skin boosters in dermatological practice is considerable, warranting further research and application.

Transitivity and non-uniform subjecthood in agreement attraction.

Research on human language converges on a view in which a grammatical "subject" is the most saliently encoded entity in mental representation. However, subjecthood is not a syntactically uniform phenomenon. Notably, many languages encode morphological distinctions between subjects of transitive verbs (i.e., verbs that require an object) and subjects of intransitive verbs. We ask how this typological pattern manifests in a language like English (which does not morphologically signal it) by examining the "distinctiveness" of transitive versus intransitive subjects in memory during online sentence processing. We conducted a self-paced reading experiment that tested for "attraction" effects (Dillon et al., Journal of Memory and Language, 69(2), 85-103, 2013; Wagers et al., Journal of Memory and Language, 61, 206-237, 2009) in the processing of subject-verb number agreement. We find that transitive subjects trigger attraction effects, but that these effects are mitigated for intransitive subject attractors (independently of the number of other noun phrases present in the intervening clause). We interpret this as indicating that transitive subjects are less distinctive and therefore less representationally salient than intransitive subjects: This is because a transitive subject must compete with another clause-mate core argument (i.e., a direct object), which draws on resources from the same pool of memory resources. On the other hand, an intransitive subject minimally only competes with a non-core argument (i.e., an oblique noun phrase); this consumes fewer memory resources, leaving the subject to enjoy greater spoils.

Causes and management of sight threatening complications of dermal filler injections: A review.

Injectable dermal fillers continue to increase in popularity in aesthetic medicine. Although rare, vision loss secondary to filler injections is a devastating complication associated with a poor visual prognosis. The mechanism for vision loss is thought to be related to retrograde embolization of the dermal filler from peripheral vessels in the face into the ophthalmic arterial system. Early recognition and prompt management are essential if vision is to be salvaged. The use of retrobulbar hyaluronidase is still contentious, however when administered by a specialist, this treatment gives the best chance at visual recovery and should be considered for all cases.

Restoration of function following traumatic superior eyelid avulsion in a horse treated with advancement flap blepharoplasty (H-plasty) and subdermal hyaluronic acid filler.

OBJECTIVE: To describe the successful restoration of superior eyelid function in a horse following traumatic avulsion using an advancement flap blepharoplasty and subdermal hyaluronic acid filler. ANIMAL STUDIED: A 21-year-old American Paint Horse stallion who was attacked by a fellow stallion resulting in numerous traumatic injuries including avulsion of approximately 75% of the left superior eyelid. PROCEDURES: With standing sedation and locoregional anesthesia, the superior eyelid wound was debrided and an advancement flap blepharoplasty (H-plasty) and temporary tarsorrhaphy were performed. Routine healing of the surgical site occurred over the subsequent weeks, though lagophthalmos persisted. At 2 and 4 weeks post-operatively, 2.4% cross-linked hyaluronic acid was injected subdermally into the superior eyelid to attempt to improve corneal coverage. At 8 weeks post-operatively, a complete blink was restored and the cosmetic outcome was good. CONCLUSIONS: Injection of subdermal hyaluronic acid filler following eyelid injuries or blepharoplastic procedures that result in lagophthalmos can improve corneal coverage by the eyelids and allow for maintenance of a comfortable and visual eye.

Updated Filler Emergency Kit: Next-Generation Emergency Solution.

INTRODUCTION: The rising popularity of facial filler injections has corresponded with an increase in reported complications. While a filler emergency kit was previously introduced, advancements in the field have highlighted certain limitations, prompting the development of the updated filler emergency kit (UFEK). METHODS: The authors conducted literature research up to February 2023, focusing on PubMed and open web searches for articles referred to filler emergent complications: vascular occlusion, blindness and anaphylaxis. Approximately 1200 articles were obtained from PubMed and other sources, and 45 articles were reviewed. RESULTS: The developed UFEK protocol delineates specific interventions meticulously tailored to address diverse emergent scenarios linked to soft tissue fillers complications. This protocol emphasizes the urgent requirement for timely and personalized interventions. CONCLUSION: The UFEK offers a standardized, comprehensive and effective approach. This work contributes to the responsible and informed progression of the field of aesthetic medicine, providing more value and safety, both for clinicians and patients. Level of Evidence IV This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Role of Hyperbaric Oxygen in Filler-Induced Vascular Occlusion.

INTRODUCTION: The rising incidence of filler-induced vascular complications in the context of aesthetic procedures necessitates a thorough assessment of therapeutic options. Hyperbaric oxygen therapy (HBOT) has emerged as a potential intervention for filler-induced vascular occlusion (FIVO), although optimal dosing and timing remain undefined. METHODS: This review explores the pathophysiology of FIVO and elucidates HBOT's multifaceted role in salvaging ischemic tissue. The physical and biochemical mechanisms of HBOT, including its vasodilatory, anti-spasmodic, and anti-inflammatory effects, are examined. RESULTS: HBOT serves as an adjunctive therapy in FIVO management, emphasizing timely intervention, adherence to specific pressures (two atmosphere absolute), and session durations (60 minutes) to optimize efficacy and minimize complications. While existing HBOT protocols for compromised grafts provide insights, standardized guidelines for FIVO are lacking. CONCLUSION: HBOT enhances tissue oxygenation, modulates reactive oxygen species, and influences angiogenesis and hypoxia response. However, it does not replace key treatment protocols for filler vascular complications. Further research and standardized protocols are warranted to define HBOT's definitive role in mitigating filler-induced vascular complications. Level of Evidence IV This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Analysis of the Morphology, Rheology, and Clinical Applicability of a Hybrid Injectable with Hyaluronic Acid and Hydroxyapatite.

BACKGROUND: Treating signs of aging requires skeletal restructuring, facial contour redefinition, and sagging skin treatment. Hence, HarmonyCa® was recently introduced in the market, combining hyaluronic acid and hydroxyapatite. However, there are no studies evaluating the physicochemical properties of this material. PURPOSE: To analyze the morphology, rheology, and clinical applicability of HarmonyCa® over a 180-day follow-up. METHODS: A morphological analysis with scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) and rheology measurement with a rheometer. The clinical applicability analysis included a tissue ptosis patient who received the product and was reassessed 30 and 180 days after applying HarmonyCa®. RESULTS: SEM and EDS analyses showed two distinct morphologies related to hydroxyapatite and hyaluronic acid. The rheological measurements of HarmonyCa® showed G' and G″ of 51.56 and 44.01 Pa, respectively. The tan δ value was 0.8503, and G* was 108.1 Pa. The clinical outcomes were satisfactory. CONCLUSION: HarmonyCa® presents a good synergy between hyaluronic acid and hydroxyapatite. Also, the rheological analysis showed moderate viscosity for the product, with a clinical indication for subcutaneous application. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Hand Rejuvenation with Customizable Hybrid Fillers: Premixed Calcium Hydroxyapatite and Hyaluronic Acid.

INTRODUCTION: Hand aging is a prevalent concern characterized by the atrophy of local soft tissues and increased visibility of vessels and tendons. Hyaluronic acid (HA) and calcium hydroxyapatite (CaHA) are well-established treatments for addressing this issue. While hybrid filler containing HA and CaHA has been proposed for facial rejuvenation, studies investigating its efficacy for hand rejuvenation are lacking. OBJECTIVE: This study aims to assess the safety and efficacy of a premixed hybrid filler containing calcium hydroxyapatite (CaHA) and hyaluronic acid (HA) for hand rejuvenation. METHODS: A prospective, double-blind, controlled trial was conducted. The control arm (CA) received conventional subdermal treatment with CaHA at a 1:1 dilution. The intervention arm (IA) underwent hybrid treatment, consisting of CaHA at a 1:1 dilution combined with 1 ml of low-density HA. Evaluation was performed subjectively using the Global Aesthetic Improvement Scale (GAIS) and the Manchester Hand Grading System (MHGS), and objectively using cutometry, corneometry, and ultrasound. RESULTS: Both the CA and the IA exhibited high rates of patient satisfaction and satisfaction as assessed by blinded evaluators. Although numerical superiority was observed in the IA, no statistical difference was found between the two groups. Significant improvements in hydration, elasticity, and skin thickness were observed in both arms, with no discernible difference between them. Greater ultrasound echogenicity was noted in the IA, which, as indicated by existing literature, may suggest enhanced biostimulation. No adverse effects were reported in either arm. CONCLUSION: Premixed filler containing HA and CaHA for hand rejuvenation appears to be a safe and effective approach. LEVEL OF EVIDENCE I: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Objective Noninvasive Measurement of the Volumizing Effect of a Dermal Filler: An In Vivo Study.

BACKGROUND: Information about the volumizing effects of dermal fillers is critical for physicians' understanding of product features and prudent decision-making in clinical practice. It is important for material engineers to develop and optimize new dermal fillers, especially when comparing the physiochemical properties of a new product with those of existing fillers that are used worldwide. OBJECTIVE: This study aimed to establish a reliable, noninvasive method for in vivo quantitative evaluation of the filling effect in order to predict possible effectiveness after filler injection and to evaluate the degradation trend over time. METHODS: A rabbit model of ear injection with dermal fillers was established. Hyaluronic acid (HA) filler was injected into the subcutaneous layer of rabbit ears, resulting in a stable skin bulge. Ultrasonography was used to noninvasively measure the skin bulge for volume calculation; the volume change was analyzed periodically until 38 weeks. Pathological examination, the gold standard, was performed to confirm degradation. RESULTS: The immediate volumizing effect of HA filler injection was macroscopically observed as a local skin bulge. Ultrasound was able to precisely detect the shape of the filler and calculate the length, width, and height of the skin bulge at each time point. The degree of uplift and amount of residual samples in the pathological evaluation were consistent with the results of morphological observation using ultrasound. CONCLUSION: Evaluation of the volume impact of dermal filler through the rabbit ear injection model evaluation enables material science evaluation in the early stage of material development, and has certain clinical reference value. LEVEL OF EVIDENCE I: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Dermal Filler Hypersensitivity Post-COVID-19 Illness: Case Series and Literature Review.

OBJECTIVE: To report two cases of dermal filler hypersensitivity post-COVID-19 illness and review the literature. METHODS: A literature review was performed. Data were extracted from the articles: the author, year of publication, age and sex of the patient, filler substance, injection site, symptoms and signs, onset time, diagnostic results, treatment, and prognosis. RESULTS: Six cases from six literatures were included in the review. All of them were female and were confirmed infected with COVID-19. Five of them received hyaluronic acid injection and one patient received polyacrylamide. Time after injection ranged from 8 months to 9 years. Onset of symptoms ranged from two to four weeks post-infection. The clinical manifestations included swelling, edema, induration, erythema, and tenderness. The site where the symptoms appeared was the injection site, and symptoms appeared at each injection site at the same time, including cheeks, periocular area, and lips. CONCLUSION: Dermal filler hypersensitivity may occur post-COVID-19 illness. A detailed history and clinical examination can help confirm the diagnosis. LEVEL OF EVIDENCE V: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Permanent Facial Fillers: Addressing Complications and Advancing Solutions.

Soft tissue augmentation with fillers has witnessed a surge in popularity for rejuvenating facial features, offering solutions for wrinkles, volume loss, and contour irregularities. Non-biodegradable fillers like silicone, polyacrylamide hydrogel, and polymethylmethacrylate (PMMA) have been introduced, promising enduring results. However, reports on silicone filler usage have highlighted a spectrum of adverse events, ranging from erythema and edema to more severe complications like infection, vascular occlusion, and inflammatory nodules. The adverse effects of non-resorbable facial fillers can manifest even years post-procedure, resulting in significant discomfort and dissatisfaction for patients. Consequently, the literature is focusing on potential treatments for these outcomes, including systemic antibiotics, corticosteroid injections, surgical drainage, and excision. Despite these options, consensus on optimal treatment modalities remains elusive. Surgical excision is the definitive method for removing permanent fillers, albeit with the risk of post-removal irregularities. Fat grafting has emerged as a viable solution, allowing for the correction of volume deficits and asymmetries. Utilizing the patient's own tissue, fat grafting reduces the risk of adverse reactions and rejection. It offers targeted volume enhancement, restoring facial symmetry and proportion, and promoting tissue healing and regeneration through the presence of stem cells. After permanent filler removal, further filler injections are not advisable. In such cases, fat grafting offers several advantages, including reduced risk and targeted enhancement. Facial fat grafting effectively restores facial volume and symmetry, with stem cells aiding in tissue regeneration for long-term skin health. In essence, while the demand for aesthetic procedures continues to rise, there's a shift toward absorbable fillers like hyaluronic acid-based ones, favored for their safer outcomes. Evidence-based practices and ongoing research are crucial for ensuring the safety and efficacy of aesthetic procedures, ultimately enhancing patient outcomes and confidence.Level of Evidence V This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Application of High-Frequency Ultrasound to Evaluate Forehead Filling Materials.

BACKGROUND: In recent years, soft tissue materials have been applied as forehead fillers. Some filling materials need to be removed or refilled in a timely manner in certain situations; therefore, it is important to develop a method to identify the location and type of filling materials. This study summarizes the imaging findings of different filling materials under high-frequency ultrasound, providing a reference for clinical treatment. METHODS: We screened facial ultrasound images performed at the Plastic Surgery Hospital of the Chinese Academy of Medical Sciences from April 2015 to July 2023 and classified and summarized the types of frontal filling materials and their imaging results. RESULTS: This study included ultrasound imaging results from 114 patients, including 39 with hyaluronic acid (HA) filling, 45 with polyacrylamide hydrogel (PAG) filling, 14 who received autologous fat transplantation, 2 who received prosthesis implantation, 2 who received both HA and PAG filling, and 12 who received silicone oil filling. HA mainly manifests as an anechoic zone on ultrasonography, with images divisible into four types. PAG primarily presents as fine punctate echoes, divisible into five types. Fat transplantation presents as a low-echo area with uneven density, divisible into five types. Finally, the silicone oil-filling material appears as a cloud-like high echo on the forehead, visible throughout the entire skin layer, and unclear imaging in deep tissues. CONCLUSION: High-frequency ultrasound is a safe and reliable method to evaluate the type and position of forehead filling materials, which can be easily applied in clinical practice. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Cross-linked Sodium Hyaluronate Gel with PLLA-b-PEG Microsphere for Facial Contouring in Chinese: A Retrospective Study.

BACKGROUND: In Asia, the demand for cosmetic facial treatments has surged due to technological advancements, increased social acceptability, and affordability. Poly-L-lactic acid (PLLA) fillers, known for their biocompatibility and biodegradability, have emerged as a popular choice for facial contouring, yet studies specifically addressing their use in Asian populations are scarce. METHODS: This retrospective study examined 30 Chinese patients who underwent facial contouring with PLLA fillers, focusing on product composition, injection techniques, and safety measures. A comprehensive clinical evaluation was performed, including the Global Aesthetic Improvement Scale (GAIS) and Global Impression of Change Scale (GICS) for effectiveness and patient satisfaction, respectively. RESULTS: No significant difference in GAIS scores was observed between injectors and blinded evaluators over a 12-month period, indicating consistent effectiveness. Patient satisfaction remained high, with GICS scores reflecting positive outcomes. The safety profile was favorable, with no serious adverse events reported. The study highlighted the importance of anatomical knowledge to avoid complications, particularly in areas prone to blindness. CONCLUSIONS: PLLA fillers offer a safe, effective option for facial contour correction in the Asian population, achieving high patient satisfaction and maintaining results over time. The study underscores the need for tailored approaches in cosmetic procedures for Asians, considering their unique facial structures and aesthetic goals. Further research with larger, multicenter cohorts is recommended to validate these findings and explore long-term effects. LEVEL OF EVIDENCE III: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Three-Dimensional Location of the Facial Artery in Relation to the Nasolabial Fold in Asian People: A Cadaveric CTA Study.

BACKGROUND: Injection cosmetics have become popular in recent years. The nasolabial fold is one of the most important and dangerous regions in the midface, and its three-dimensional relationship with the facial artery remains unclear. METHODS: Fifty-two cadavers infused with lead oxide contrast medium via the external carotid arteries were scanned by computed tomography (CT). The three-dimensional model was reconstructed using Mimics and Origin software, and the relevant data were calculated using validated algorithms. RESULTS: There were three facial artery types according to its course in relation to the nasolabial fold. In the most common type, accounting for 83.7% of specimens, the facial artery evolves into an angular artery, with a horizontal distance between facial artery and nasolabial fold of - 1.90 ± 2.40, - 3.90 ± 2.95, - 5.18 ± 3.42, - 5.59 ± 3.53, - 5.59 ± 3.83, - 6.07 ± 4.10, - 6.92 ± 3.70, - 6.79 ± 3.37, - 4.52 ± 3.20, and - 2.76 ± 3.60 (mm) from the nasal ala to the oral commissure and a vertical distance of - 4.03 ± 2.56, - 3.27 ± 2.27, - 2.81 ± 2.57, - 2.1 ± 2.64, - 1.5 ± 3.32, - 0.71 ± 3.99, 0.92 ± 4.43, 0.4 ± 5.31, - 4.14 ± 5.14, - 7.05 ± 4.74 (mm). CONCLUSIONS: The facial artery is vulnerable to damage when injecting filler in the nasolabial fold. For the upper 1/3 of the nasolabial fold, the supraperiosteal layer is recommended for injection, while for the lower 2/3 of the nasolabial fold, the dermal layer along the nasolabial fold is recommended. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .