The Fabrication and Property Characterization of a Ho2YSbO7/Bi2MoO6 Heterojunction Photocatalyst and the Application of the Photodegradation of Diuron under Visible Light Irradiation.

A novel photocatalytic nanomaterial, Ho2YSbO7, was successfully synthesized for the first time using the solvothermal synthesis technique. In addition, a Ho2YSbO7/Bi2MoO6 heterojunction photocatalyst (HBHP) was prepared via the hydrothermal fabrication technique. Extensive characterizations of the synthesized samples were conducted using various instruments, such as an X-ray diffractometer, a Fourier transform infrared spectrometer, a Raman spectrometer, a UV-visible spectrophotometer, an X-ray photoelectron spectrometer, and a transmission electron microscope, as well as X-ray energy dispersive spectroscopy, photoluminescence spectroscopy, a photocurrent test, electrochemical impedance spectroscopy, ultraviolet photoelectron spectroscopy, and electron paramagnetic resonance. The photocatalytic activity of the HBHP was evaluated for the degradation of diuron (DRN) and the mineralization of total organic carbon (TOC) under visible light exposure for 152 min. Remarkable removal efficiencies were achieved, with 99.78% for DRN and 97.19% for TOC. Comparative analysis demonstrated that the HBHP exhibited markedly higher removal efficiencies for DRN compared to Ho2YSbO7, Bi2MoO6, or N-doped TiO2 photocatalyst, with removal efficiencies 1.13 times, 1.21 times, or 2.95 times higher, respectively. Similarly, the HBHP demonstrated significantly higher removal efficiencies for TOC compared to Ho2YSbO7, Bi2MoO6, or N-doped TiO2 photocatalyst, with removal efficiencies 1.17 times, 1.25 times, or 3.39 times higher, respectively. Furthermore, the HBHP demonstrated excellent stability and reusability. The mechanisms which could enhance the photocatalytic activity remarkably and the involvement of the major active species were comprehensively discussed, with superoxide radicals identified as the primary active species, followed by hydroxyl radicals and holes. The results of this study contribute to the advancement of efficient heterostructural materials and offer valuable insights into the development of sustainable remediation strategies for addressing DRN contamination.

Constructing Direct Z-Scheme Y2TmSbO7/GdYBiNbO7 Heterojunction Photocatalyst with Enhanced Photocatalytic Degradation of Acetochlor under Visible Light Irradiation.

This study presents a pioneering synthesis of a direct Z-scheme Y2TmSbO7/GdYBiNbO7 heterojunction photocatalyst (YGHP) using an ultrasound-assisted hydrothermal synthesis technique. Additionally, novel photocatalytic nanomaterials, namely Y2TmSbO7 and GdYBiNbO7, were fabricated via the hydrothermal fabrication technique. A comprehensive range of characterization techniques, including X-ray diffractometry, Fourier-transform infrared spectroscopy, Raman spectroscopy, UV-visible spectrophotometry, X-ray photoelectron spectroscopy, transmission electron microscopy, X-ray energy-dispersive spectroscopy, fluorescence spectroscopy, photocurrent testing, electrochemical impedance spectroscopy, ultraviolet photoelectron spectroscopy, and electron paramagnetic resonance, was employed to thoroughly investigate the morphological features, composition, chemical, optical, and photoelectric properties of the fabricated samples. The photocatalytic performance of YGHP was assessed in the degradation of the pesticide acetochlor (AC) and the mineralization of total organic carbon (TOC) under visible light exposure, demonstrating eximious removal efficiencies. Specifically, AC and TOC exhibited removal rates of 99.75% and 97.90%, respectively. Comparative analysis revealed that YGHP showcased significantly higher removal efficiencies for AC compared to the Y2TmSbO7, GdYBiNbO7, or N-doped TiO2 photocatalyst, with removal rates being 1.12 times, 1.21 times, or 3.07 times higher, respectively. Similarly, YGHP demonstrated substantially higher removal efficiencies for TOC than the aforementioned photocatalysts, with removal rates 1.15 times, 1.28 times, or 3.51 times higher, respectively. These improvements could be attributed to the Z-scheme charge transfer configuration, which preserved the preferable redox capacities of Y2TmSbO7 and GdYBiNbO7. Furthermore, the stability and durability of YGHP were confirmed, affirming its potential for practical applications. Trapping experiments and electron spin resonance analyses identified active species generated by YGHP, namely •OH, •O2-, and h+, allowing for comprehensive analysis of the degradation mechanisms and pathways of AC. Overall, this investigation advances the development of efficient Z-scheme heterostructural materials and provides valuable insights into formulating sustainable remediation strategies for combatting AC contamination.

Effect of Morphology Modification of BiFeO3 on Photocatalytic Efficacy of P-g-C3N4/BiFeO3 Composites.

This current study assessed the impacts of morphology adjustment of perovskite BiFeO3 (BFO) on the construction and photocatalytic activity of P-infused g-C3N4/U-BiFeO3 (U-BFO/PCN) heterostructured composite photocatalysts. Favorable formation of U-BFO/PCN composites was attained via urea-aided morphology-controlled hydrothermal synthesis of BFO followed by solvosonication-mediated fusion with already synthesized P-g-C3N4 to form U-BFO/PCN composites. The prepared bare and composite photocatalysts' morphological, textural, structural, optical, and photocatalytic performance were meticulously examined through various analytical characterization techniques and photodegradation of aqueous rhodamine B (RhB). Ellipsoids and flakes morphological structures were obtained for U-BFO and BFO, and their effects on the successful fabrication of the heterojunctions were also established. The U-BFO/PCN composite exhibits 99.2% efficiency within 20 min of visible-light irradiation, surpassing BFO/PCN (88.5%), PCN (66.8%), and U-BFO (26.1%). The pseudo-first-order kinetics of U-BFO/PCN composites is 2.41 × 10-1 min-1, equivalent to 2.2 times, 57 times, and 4.3 times of BFO/PCN (1.08 × 10-1 min-1), U-BFO, (4.20 × 10-3 min-1), and PCN, (5.60 × 10-2 min-1), respectively. The recyclability test demonstrates an outstanding photostability for U-BFO/PCN after four cyclic runs. This improved photocatalytic activity exhibited by the composites can be attributed to enhanced visible-light utilization and additional accessible active sites due to surface and electronic band modification of CN via P-doping and effective charge separation achieved via successful composites formation.

Preparation and Property Characterization of Sm2EuSbO7/ZnBiSbO5 Heterojunction Photocatalyst for Photodegradation of Parathion Methyl under Visible Light Irradiation.

An unprecedented photocatalyst, Sm2EuSbO7, was successfully fabricated in this paper, through a high-temperature solid-state calcination method, which represented its first ever synthesis. Additionally, using the solvothermal method, the Sm2EuSbO7/ZnBiSbO5 heterojunction photocatalyst (SZHP) was fabricated, marking its debut in this study. XRD analysis confirmed that both Sm2EuSbO7 and ZnBiSbO5 exhibited pyrochlore-type crystal structures with a cubic lattice, belonging to the Fd3m space group. The crystal cell parameter was determined to be 10.5682 Å or 10.2943 Å for Sm2EuSbO7 or ZnBiSbO5, respectively. The band gap width measured for Sm2EuSbO7 or ZnBiSbO5 was 2.73 eV or 2.61 eV, respectively. Under visible light irradiation for 150 min (VLTI-150 min), SZHP exhibited remarkable photocatalytic activity, achieving 100% removal of parathion methyl (PM) concentration and 99.45% removal of total organic carbon (TOC) concentration. The kinetic constant (k) for PM degradation and visible light illumination treatment was determined to be 0.0206 min-1, with a similar constant k of 0.0202 min-1 observed for TOC degradation. Remarkably, SZHP exhibited superior PM removal rates compared with Sm2EuSbO7, ZnBiSbO5, or N-doped TiO2 photocatalyst, accompanied by removal rates 1.09 times, 1.20 times, or 2.38 times higher, respectively. Furthermore, the study investigated the oxidizing capability of free radicals through the use of trapping agents. The results showed that hydroxyl radicals had the strongest oxidative capability, followed by superoxide anions and holes. These findings provide a solid scientific foundation for future research and development of efficient heterojunction compound catalysts.

Construction of ternary CuO/CuFe2O4/g-C3N4 composite and its enhanced photocatalytic degradation of tetracycline hydrochloride with persulfate under simulated sunlight.

In this study, a graphitic carbon nitride (g-C3N4) based ternary catalyst CuO/CuFe2O4/g-C3N4 (CCCN) is successfully prepared thorough calcination method. After confirming the structure and composition of CCCN, the as-synthesized composites are utilized to activate persulfate (PS) for the degradation of organic contaminant. While using tetracycline hydrochloride (TC) as pollutant surrogate, the effects of initial pH, PS and catalyst concentration on the degradation rate are systematically studied. Under the optimized reaction condition, CCCN/PS is able to give 99% degradation extent and 74% chemical oxygen demand removal in assistance of simulated solar light, both of which are apparently greater than that of either CuO/CuFe2O4 and pristine g-C3N4. The great improvement in degradation can be assignable to the effective separation of photoinduced carriers thanks to the integration between CuO/CuFe2O4 and g-C3N4, as well as the increased reaction sites given by the g-C3N4 substrate. Moreover, the scavenging trials imply that the major oxidative matters involved in the decomposition are hydroxyl radicals (•OH), superoxide radicals (•O2-) and photo-induced holes (h+).

Facile fabrication of AgI/Sb2O3 heterojunction photocatalyst with enhanced visible-light driven photocatalytic performance for efficient degradation of organic pollutants in water.

The construction of heterojunction is considered as a promising approach to designing highly effective visible-light driven photocatalysts. In this research, the AgI/Sb2O3 heterojunction photocatalyst was synthesized by a simple in situ deposition-precipitation procedure, which was supported by XPS results. Among the prepared samples, the 60% AgI/Sb2O3 samples exhibited the best ARG degradation ratio (98.3%) in 1 h under visible light irradiation, while the pure Sb2O3 and AgI exhibited almost none photocatalytic performance. The trapping experiments and EPR proved that the photo-generated ·O2- and ·OH made major contributions to the photocatalytic degradation of ARG by the 60% AgI/Sb2O3 samples. The enhanced photocatalytic performance of AgI/Sb2O3 heterojunction photocatalysts was ascribed to that the e- produced in the CB of AgI would be transferred to the empty CB of Sb2O3, which could effectively promote separation of photo-induced carries. More importantly, the transfer of electrons from AgI to Sb2O3 would be in favor of restraining the reduction of Ag+ to Ag0 resulting in the good stability of heterojunction photocatalysts. The heterojunction photocatalyst provided in this work might be a prospective candidate for decontamination of water.

Exploring the Enhanced Catalytic Activity of Pt Nanoparticles Generated on the Red Phosphorus/Graphitic Carbon Nitride Binary Heterojunctions in the Photo-assisted Hydrolysis of Ammonia Borane.

Ammonia borane (AB) holds great promise for chemical hydrogen storage, but its slow dehydrogenation kinetics under ambient conditions requires a suitable catalyst to facilitate hydrogen production from AB. Here, we fabricated binary red phosphorus/graphitic carbon nitride (RP/g-CN) heterojunctions decorated with Pt nanoparticles (NPs, denoted Pt/RP/g-CN) with a facile ultrasound-assisted two-step protocol as a photo-assisted catalyst for the hydrolysis of AB (HAB). The heterojunction established through intimate P-O-N bonds was proven to have improved photophysical properties such as a lower electron-hole recombination and enhanced visible light utilization compared to the pristine components. With the incorporation of Pt NPs, the optical properties of RP/g-CN heterojunctions were further improved through Schottky junction formation between semiconductors and Pt NPs, enabling a superb hydrogen gas (H2) generation rate of 142 mol H2·mol Pt-1·min-1 under visible light irradiation. Even though g-CN is a well-known host material for many metal NPs, here we discovered that the interaction of Pt NPs with RP in the ternary heterojunction structure is more favorable than that of g-CN, stressing the key role of RP as a support material in the designed ternary heterostructure. The band alignment of the ternary heterojunction catalyst along with the flow of charge carriers was also studied and shown to be a type-II heterojunction structure without hole migration, namely, a complex type-II heterojunction. Several scavenger experiments were also conducted to explain the mechanism of the photo-assisted HAB. To the best of our knowledge, this is the first example of a dual mechanism proposed for the visible light-assisted HAB. While the majority of the H2 was believed to be produced on the Pt NPs surface with the traditional B-N bond dissociation mechanism, the strong oxidizing action of OH• radicals formed by the heterojunction photocatalyst was also speculated to account for the 33% increase in the activity upon visible light irradiation through another mechanism.

One-Pot Synthesis of 2D-2D WO3 /g-C3 N4 Photocatalyst in Reverse Microemulsion System via Supercritical CO2 for Enhanced Hydrogen Generation.

Construction of Z-scheme photocatalyst is an effective approach for using solar energy to produce hydrogen during water splitting. Herein, 2D/2D WO3 /g-C3 N4 heterojunction photocatalyst was synthesized by a convenient and green method including exfoliation and heterojunction procedures, in the reverse microemulsion system via supercritical carbon dioxide (scCO2 ). The resultant W/CN-10.3 composite exhibited enhanced photocatalytic activities towards the hydrogen evolution during water splitting with a hydrogen evolution rate of 688.51 µmol g-1 h-1 , which was more than 16 times higher than bulk g-C3 N4 with the same loading amount of Pt as cocatalyst. Due to its effective separation of photogenerated carriers and prolonged lifetime, more photoexcited electrons with high reduction ability could contribute to the production of H2 . Possible formation mechanism of 2D-2D WO3 /g-C3 N4 nanosheets via scCO2 in the reverse microemulsion system by the one-pot method has been proposed. This work provides an efficient and green strategy to synthesize 2D-2D heterojunction for the utilization in solar-to-fuel conversion.

Integrating Hybrid Perovskite Nanocrystals into Metal-Organic Framework as Efficient S-Scheme Heterojunction Photocatalyst for Synergistically Boosting Controlled Radical Photopolymerization under 980 nm NIR Light.

S-scheme heterojunction photocatalyst MAPbI3@PCN-222 with light absorption extending to the NIR region is constructed by embedding organic-inorganic hybrid perovskite (MAPbI3) into porphyrinic Zr-MOF (PCN-222). Both in situ X-ray photoelectron spectroscopy, ultraviolet photoelectron spectral characterization, and photocatalytic polymerization experiment prove the formation of S-scheme heterojunction. MAPbI3@PCN-222 with a low dosage (90 ppm) displays an impressive photocatalytic ability for 980 nm light-mediated photoinduced electron/energy-transfer-reversible addition-fragmentation chain-transfer (PET-RAFT) polymerization in air. The well-defined controllable-molecular weight polymers including block copolymers and ultrahigh-molecular weight polymers can be achieved with narrow distributions (Mw/Mn < 1.20) via rapid photopolymerization. The industrial application potential of the photocatalyst also has been proved by scale-up synthesis of polymers with low polydispersity under NIR light-induced photopolymerization in a large-volume reaction system (200 mL) with high monomer conversion up to 99%. The penetration photopolymerization through the 5 mm polytetrafluoroethylene plate and excellent photocontrollable behavior illustrate the existence of long-term photogenerated electron transfer of heterojunction and abundant free radicals in photopolymerization. The photocatalyst still retains high catalytic activity after 10 cycles of photopolymerization in air. It is revealed for the first time that the special PET-RAFT polymerization pathway is initiated by the aldehyde-bearing α-aminoalkyl radical derived from the oxidization of triethanolamine (TEOA) by the heterojunction photocatalyst. This research offers a new insight into understanding the NIR-light-activated PET-RAFT polymerization mechanism in the presence of TEOA.

Construction of Pt@BiFeO3 Xerogel-Supported O-g-C3N4 Heterojunction System for Enhanced Visible-Light Activity towards Photocatalytic Degradation of Rhodamine B.

Synthetic organic pigments from the direct discharge of textile effluents are considered as colossal global concern and attract the attention of scholars. The efficient construction of heterojunction systems involving precious metal co-catalysis is an effective strategy for obtaining highly efficient photocatalytic materials. Herein, we report the construction of a Pt-doped BiFeO3/O-g-C3N4 (Pt@BFO/O-CN) S-scheme heterojunction system for photocatalytic degradation of aqueous rhodamine B (RhB) under visible-light irradiation. The photocatalytic performances of Pt@BFO/O-CN and BFO/O-CN composites and pristine BiFeO3 and O-g-C3N4 were compared, and the photocatalytic process of the Pt@BFO/O-CN system was optimized. The results exhibit that the S-scheme Pt@BFO/O-CN heterojunction has superior photocatalytic performance compared to its fellow catalysts, which is due to the asymmetric nature of the as-constructed heterojunction. The as-constructed Pt@BFO/O-CN heterojunction reveals high performance in photocatalytic degradation of RhB with a degradation efficiency of 100% achieved after 50 min of visible-light irradiation. The photodegradation fitted well with pseudo-first-order kinetics proceeding with a rate constant of 4.63 × 10-2 min-1. The radical trapping test reveals that h+ and •O2- take the leading role in the reaction, while the stability test reveals a 98% efficiency after the fourth cycle. As established from various interpretations, the considerably enhanced photocatalytic performance of the heterojunction system can be attributed to the promoted charge carrier separation and transfer of photoexcited carriers, as well as the strong photo-redox ability established. Hence, the S-scheme Pt@BFO/O-CN heterojunction is a good candidate in the treatment of industrial wastewater for the mineralization of organic micropollutants, which pose a grievous threat to the environment.

Bi3.64Mo0.36O6.55 nanoparticles anchored in BiOI: A p-n heterojunction photocatalyst to enhance water purification.

Selective constructing of heterojunctions enables directional electron-hole migration and favorable charge separation. In this study, a novel p-n junction Bi3.64Mo0.36O6.55 (BMO) nanoparticles anchored in BiOI construct by hydrothermal and subsequent in-situ synthesis. The construction of tight heterojunctions that enhance the characteristic absorption of visible light by Bi3.64Mo0.36O6.55/BiOI (BIMO) and expose more reactive sites can be used to facilitate the rapid degradation of antibiotics (Tetracycline, TC), endocrine disruptors (Bisphenol A, BPA) and dyes in water. In addition, the BIMO catalyst maintained the rapid degradation rate of TC despite the interference of inorganic anions and aqueous substrates. The charge transfer pathways and radical species between the heterojunction components were investigated. In addition, the intermediates and toxicological analysis showed that TC was further mineralized and the small molecule products were generated significantly less toxic and less contaminated. In conclusion, this study synthesized photocatalysts based on p-n heterojunctions, which have potential applications for the degradation of TC.

Bismuth Sulfide Doped in Graphitic Carbon Nitride Degrades Nitric Oxide under Solar Irradiation.

This study developed and examined the application of bismuth sulfide doped on graphitic carbon nitride (Bi2S3@g-C3N4) in the degradation of NO under solar irradiation. Bi2S3@g-C3N4 was prepared through the calcination method. The morphological structure and chemical properties of the synthesized photocatalyst were analyzed before the degradation tests. After doping with Bi2S3@g-C3N4, the bandgap was reduced to 2.76 eV, which increased the absorption of solar light. As a result, the Bi2S3@g-C3N4 achieved higher NO degradation (55%) compared to pure Bi2S3 (35%) and g-C3N4 (45%). The trapping test revealed that the electrons were the primary species responsible for most of the NO degradation. The photocatalyst was stable under repeated solar irradiation, maintaining degradation efficiencies of 50% after five consecutive recycling tests. The present work offers strong evidence that Bi2S3@g-C3N4 is a stable and efficient catalyst for the photocatalytic oxidation of NO over solar irradiation.

Cadmium-sulfide/gold/graphitic-carbon-nitride sandwich heterojunction photocatalyst with regulated electron transfer for boosting carbon-dioxide reduction to hydrocarbon.

Developing the heterogeneous photocatalysts with high performance for carbon dioxide (CO2) conversion to solar fuels is remarkably significant for reducing the atmospheric CO2 level and achieving the target of carbon neutrality through the artificial photosynthesis strategies. However, it remains a great challenge for most of the photocatalysts to achieve the CO2-to-hydrocarbon conversion via a multi-proton coupled multi-electron reduction process. In this work, the cadmium-sulfide/gold/graphitic-carbon-nitride (CdS/Au/g-C3N4) heterojunction photocatalyst with sandwich nanostructures is designedly constructed by a selective two-step photodeposition process. The better separation of photogenerated electrons and holes in CdS/Au/g-C3N4 heterojunction creates the higher density of surface photogenerated electron, dynamically accelerating the multi-electron reduction of CO2. Moreover, the selective photodeposition of CdS on Au/g-C3N4 affords sufficient electron-enriched Sδ- active sites which are more beneficial to the provision of H adatoms. These advantages jointly improve the photocatalytic CO2 conversion to methane (CH4) via a multi-proton coupled multi-electron reduction process. The CH4 yield rate on CdS/Au/g-C3N4 photocatalyst is about twice that of CdS/g-C3N4, while g-C3N4 and Au/g-C3N4 only produce CO. The total electron utilization for CO2 reduction on CdS/Au/g-C3N4 photocatalyst is 6.9 times that of g-C3N4. Furthermore, the CdS/Au/g-C3N4 photocatalyst exhibits high stability in consecutive cycles of CO2 reduction reaction. The photocatalytic mechanism is proposed on the basis of in situ spectrographic analyses together with other detailed characterizations.

Sn-doped BiOI assisted the excellent photocatalytic performance of multi-shelled ZnO microspheres under simulated sunlight.

To deal with the environmental pollution and energy crises, it is indispensable to find green and efficient means to overcome these challenges. Herein, the Sn-doped BiOI modified multi-shelled ZnO heterojunction composite with a high performance are designed and prepared. The results prove the formation of heterojunction structure in the composites and the morphology is shown as the multi-shelled microsphere. The performances of the composites are evaluated by different kinds of antibiotic degradation and H2-evolution under simulation sunlight irradiation. The measurements present that the Sn-BiOI/ZnO (SBZs) could completely remove ciprofloxacin (CIP) within 100 min, which is 4.18 times that of ZnO in kinetics. Typically, the degradation rate of CIP for SBZ6 is over 99.9%, which is more than 25% higher than that of pure ZnO microspheres. In addition, the rate of H2 production could reach 3.08 mmol g-1∙ h-1, which is 1.79 times of the pure ZnO microspheres. The boosted performance of the composites may originate from the enhanced electronic transmission efficiency and improved separation and recombination efficiency of electrons/holes. The charge transfer mode in the SBZs heterojunction composites is proposed and verified as the Z-scheme by the active species experimental and the possible electron transfer path analysis. Therefore, Sn-doped BiOI is introduced into multi-shelled ZnO microsphere to form contact heterojunction interfacial, which greatly improves the photocatalytic performances of the SBZs. Furthermore, this work supplies a strategy for designing and preparing highly active ZnO-based heterojunction composites, which could effectively address the challenges of environmental remediation and clean energy production.

Constructing an S-scheme CuBi2O4/Bi4O5I2 heterojunction for lightemittingdiode-driven pollutant degradation and bacterial inactivation.

The CuBi2O4/Bi4O5I2 S-scheme heterojunction structure was constructed by a hydrothermal and subsequent calcination route. The combination of CuBi2O4 and Bi4O5I2 produced excellent photocatalytic performance under an LED light. A series of technical characterizations, including X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS), were used to determine the successful construction of S-scheme CuBi2O4/Bi4O5I2 composites. The improvement of photogenerated carrier separation efficiency helped to achieve the best photocatalytic performance of 37% CuBi2O4/Bi4O5I2, which can degrade tetracycline (TC) to 81.67% in 90 min, and completely inactivate Escherichia coli (E. coli) in 20 min and Staphylococcus aureus (S. aureus) in 40 min. The effects of some key parameters (such as the concentration of pollutants, the amount of catalyst, pH value of a solution, various inorganic anions and various water substrates) and the possible degradation path of tetracycline were systematically studied. Finally, the removal of pollutants and inactivation of bacterial mechanisms based on the S-scheme heterojunction (CuBi2O4/Bi4O5I2) was proposed. This study provides insight into the synthesis of S-scheme heterojunction photocatalysts, which can efficiently degrade organic pollutants and inactivate bacteria under LED light irradiation.

Preparation and Property Characterization of In2YSbO7/BiSnSbO6 Heterojunction Photocatalyst toward Photocatalytic Degradation of Indigo Carmine within Dye Wastewater under Visible-Light Irradiation.

In2YSbO7 and In2YSbO7/BiSnSbO6 heterojunction photocatalyst were prepared by a solvothermal method for the first time. The structural characteristics of In2YSbO7 had been represented. The outcomes showed that In2YSbO7 crystallized well and possessed pyrochlore constitution, a stable cubic crystal system and space group Fd3m. The lattice parameter of In2YSbO7 was discovered to be a = 11.102698 Å and the band gap energy of In2YSbO7 was discovered to be 2.68 eV, separately. After visible-light irradiation of 120 minutes (VLGI-120M), the removal rate (ROR) of indigo carmine (IC) reached 99.42% with In2YSbO7/BiSnSbO6 heterojunction (IBH) as a photocatalyst. The ROR of total organic carbon (TOC) reached 93.10% with IBH as a photocatalyst after VLGI-120M. Additionally, the dynamics constant k which was taken from the dynamic curve toward (DCT) IC density and VLGI time with IBH as a catalyst reached 0.02950 min-1. The dynamics constant k which came from the DCT TOC density and VLGI time with IBH as a photocatalyst reached 0.01783 min-1. The photocatalytic degradation of IC in dye wastewater (DW) with IBH as a photocatalyst under VLGI was in accordance with the first-order kinetic curves. IBH was used to degrade IC in DW for three cycles of experiments under VLGI, and the ROR of IC reached 98.74%, 96.89% and 94.88%, respectively, after VLGI-120M, indicating that IBH had high stability. Compared with superoxide anions or holes, hydroxyl radicals possessed the largest oxidative ability for removing IC in DW, as demonstrated by experiments with the addition of trapping agents. Lastly, the probable degradation mechanism and degradation pathway of IC were revealed in detail. The results showed that a visible-light-responsive heterojunction photocatalyst which possessed high catalytic activity and a photocatalytic reaction system which could effectively remove IC in DW were obtained. This work provided a fresh scientific research idea for improving the performance of a single catalyst.

Synthesis and Property Examination of Er2FeSbO7/BiTiSbO6 Heterojunction Composite Catalyst and Light-Catalyzed Retrogradation of Enrofloxacin in Pharmaceutical Waste Water under Visible Light Irradiation.

A new photocatalyst, Er2FeSbO7, was prepared by solid phase sintering using the high-temperature synthesis method for the first time in this paper. Er2FeSbO7/BiTiSbO6 heterojunction (EBH) catalyst was prepared by the solvent thermal method for the first time. Er2FeSbO7 compound crystallized in the pyrochlore-type architecture and cubelike crystal system; the interspace group of Er2FeSbO7 was Fd3m and the crystal cellular parameter a of Er2FeSbO7 was 10.179902 Å. The band gap (BDG) width of Er2FeSbO7 was 1.88 eV. After visible light irradiation of 150 minutes (VLGI-150min) with EBH as a photocatalyst, the removal rate (RR) of enrofloxacin (ENR) concentration was 99.16%, and the total organic carbon (TOC) concentration RR was 94.96%. The power mechanics invariable k toward ENR consistency and visible light irradiation (VLGI) time with EBH as a photocatalyzer attained 0.02296 min−1. The power mechanics invariable k which was involved with TOC attained 0.01535 min−1. The experimental results showed that the photocatalytic degradation (PCD) of ENR within pharmaceutical waste water with EBH as a photocatalyzer under VLGI was in keeping with the single-order reactivity power mechanics. The RR of ENR with EBH as a photocatalyzer was 1.151 times, 1.269 times or 2.524 times that with Er2FeSbO7 as a photocatalyst, BiTiSbO6 as a photocatalyst, or N-doping TiO2 (N-TO) as a photocatalyst after VLGI-150min. The photocatalytic activity, which ranged from high to low among above four photocatalysts, was as follows: EBHP > Er2FeSbO7 > BiTiSbO6 > N-TO. After VLGI-150min toward three periods of the project with EBH as a photocatalyst, the RR of ENR attained 98.00%, 96.76% and 95.60%. The results showed that the stability of EBH was very high. With appending trapping agent, it could be proved that the oxidative capability for degrading ENR, which ranged from strong to weak among three oxidic radicals, was as follows: superoxide anion > hydroxyl radicals (HRS) > holes. This work provides a scientific basis for the research and oriented leader development of efficient heterojunction catalysts.

Facile Synthesis of BiVO4@ZIF-8 Composite with Heterojunction Structure for Photocatalytic Wastewater Treatment.

Water pollution has always been a serious problem across the world; therefore, facile pollutant degradation via light irradiation has been an attractive issue in the field of environmental protection. In this study, a type of Zn-based metal-organic framework (ZIF-8)-wrapped BiVO4 nanorod (BiVO4@ZIF-8) with high efficiency for photocatalytic wastewater treatment was synthesized through a two-step hydrothermal method. The heterojunction structure of BiVO4@ZIF-8 was confirmed by morphology characterization. Due to the introduction of mesoporous ZIF-8, the specific surface area reached up to 304.5 m2/g, which was hundreds of times larger than that of pure BiVO4 nanorods. Furthermore, the band gap of BiVO4@ZIF-8 was narrowed down to 2.35 eV, which enabled its more efficient utilization of visible light. After irradiation under visible light for about 40 min, about 80% of rhodamine B (RhB) was degraded, which was much faster than using pure BiVO4 or other BiVO4-based photocatalysts. The synergistic photocatalysis mechanism of BiVO4@ZIF-8 is also discussed. This study might offer new pathways for effective degradation of wastewater through facile design of novel photocatalysts.

Sub-level engineering strategy of nitrogen-induced Bi2O3/g-C3N4: a versatile photocatalyst for oxidation and reduction.

Herein, the α-Bi2O3 nanocrystal decorated by nitrogen dopant and its heterojunction nanocomposite with g-C3N4 (N0.1/Bi2O3/g-C3N4) is successfully fabricated for the first time, for photo-oxidation of RhB and photo-reduction of Cr(VI) to Cr(III). The resulting N0.1/Bi2O3/g-C3N4 (3%) nanocomposite showed an optimal Cr(VI) photo-reduction and RhB photo-oxidation rates under visible-light irradiation, being 3-4 times higher than that of pure α-Bi2O3. The results from XPS confirmed the substitution of nitrogen with various oxidation states from N3+ to Nx+ (x < 5), due to the existence of different nitrogen oxides including N-O, O-N=O, and NO3- in the crystal structure. We investigated the reaction mechanism using catalytic tests, impedance spectroscopy, EPR technique, and density functional calculations. The DFT calculations presented the appearance of a new mid-gap hybrid of p states, comprised of N 2p, O 2p, and Bi 6P states, which enhance light absorption capacity and narrow band gap. The theoretical results were in excellent agreement with experimental UV-Vis data. The N0.1/Bi2O3/g-C3N4 nanocomposite exhibited acceptable practical application value and recycling ability for removal of the contaminants. Such improved photocatalytic activity is originated from the modified band positions, new electron evolution pathway, introducing defects in α-Bi2O3 by insertion of N atoms into the Bi sites, and the enhanced charge carrier mobility between N0.1/Bi2O3 and g-C3N4. The strategy to form nitrogen-doped bismuth-based nanocomposites may open a new opportunity to design atomic-level electronic defects by feasible methods to obtain a versatile photocatalyst material with simultaneous photo-reduction and photo-oxidation ability for removal of Cr(VI) and organic dyes from water.

Charge Transport Phenomena in Heterojunction Photocatalysts: The WO3/TiO2 System as an Archetypical Model.

Recent studies have demonstrated the high efficiency through which nanostructured core-shell WO3/TiO2 (WT) heterojunctions can photocatalytically degrade model organic pollutants (stearic acid, QE ≈ 18% @ λ = 365 nm), and as such, has varied potential environmental and antimicrobial applications. The key motivation herein is to connect theoretical calculations of charge transport phenomena, with experimental measures of charge carrier behavior using transient absorption spectroscopy (TAS), to develop a fundamental understanding of how such WT heterojunctions achieve high photocatalytic efficiency (in comparison to standalone WO3 and TiO2 photocatalysts). This work reveals an order of magnitude enhancement in electron and hole recombination lifetimes, respectively located in the TiO2 and WO3 sides, when an optimally designed WT heterojunction photocatalyst operates under UV excitation. This observation is further supported by our computationally captured details of conduction band and valence band processes, identified as (i) dominant electron transfer from WO3 to TiO2 via the diffusion of excess electrons; and (ii) dominant hole transfer from TiO2 to WO3 via thermionic emission over the valence band edge. Simultaneously, our combined theoretical and experimental study offers a time-resolved understanding of what occurs on the micro- to milliseconds (µs-ms) time scale in this archetypical photocatalytic heterojunction. At the microsecond time scale, a portion of the accumulated holes in WO3 contribute to the depopulation of W5+ polaronic states, whereas the remaining accumulated holes in WO3 are separated from adjacent electrons in TiO2 up to 3 ms after photoexcitation. The presence of these exceptionally long-lived photogenerated carriers, dynamically separated by the WT heterojunction, is the origin of the superior photocatalytic efficiency displayed by this system (in the degradation of stearic acid). Consequently, our combined computational and experimental approach delivers a robust understanding of the direction of charge separation along with critical time-resolved insights into the evolution of charge transport phenomena in this model heterojunction photocatalyst.