The relationship between lymphocyte DNA damage, coronary artery disease, and blood trace elements.

Somatic DNA damage and causative factors (occupational exposures, foods, habits, etc.) are thought to contribute to the pathogenesis of atherosclerosis, although knowledge about their role in coronary artery disease (CAD) is still insufficient. This study aimed to determine the effects of lymphocyte-DNA damage and blood trace element concentrations on CAD. The single-cell alkaline comet was used in the measuring of the lymphocyte DNA damage in blood samples obtained from patients (n = 99) whose CAD grade was determined by the syntax score while the angiographic intervention was carried out. Blood trace element (n = 14) concentrations were monitored by the inductively coupled plasma-optical emission spectroscopy (ICP-OES) after microwave digestion. The relationship between the DNA damage frequencies of the participants and their syntax scores, blood trace element concentrations, and other demographic and clinic parameters were statistically analyzed. Significant correlations were detected between comet data and syntax score (r = 0.858, P < .001), age (r = 0.337, P < .001), blood-urea (r = 0.360, P < .001), creatinine (r = 0.388, P < .001), HbA1c (0.218, P < .05), ECG-QRS time (r = 0.286, P < .01), ECHO-EF (r = -0.377, P < .001), and platelet (r = -0.222, P < .05). The DNA damage frequencies of the groups formed according to their CAD scores were significantly different from the control group (P < .001) and also each other (P ≤ .01). Comet frequencies and CAD grades were found to be correlated with aging (P < .05). DNA damage frequency and syntax score values were significantly (P < .05) higher in males compared to females. Syntax scores were correlated with aging (r = 0.348, P < .01), ECHO-EF (r = 0.374, P < .001), blood-urea (r = 0.398, P < .001), creatinine (r = 0.433, P < .001), glucose (0.218, P < .05), and HbA1c (r = 0.200, P < .05). Significant correlations were observed between trace elements and demographic values, blood parameters, diseases, angio parameters, ECHO, and ECG parameters. It was observed that the concentrations of trace elements detected in the blood were 93.4% correlated with each other. Lymphocyte DNA damage is a strong biomarker for the atherosclerotic indicator of CAD. Aging is an effective factor both in the DNA damage frequency and CAD risk index. Creatinine and urea are factors that have the power to change the CAD risk index and DNA damage frequency. The higher DNA damage and CAD risk were monitored in males compared to females. The relationship between some biomarkers and blood trace element concentrations showed that further studies are needed to more accurately evaluate the relationship between trace elements, DNA damage frequencies, and CAD.

Selected micro- and macro-element associations with oxidative status markers in common carp (Cyprinus carpio) blood serum and ejaculate: a correlation study.

The aim of this study was to (1) determine complex interactions between macro- and micro-elements present in blood serum and ejaculate of common carp (Cyprinus carpio), and (2) examine the association between alterations in these macro- and micro-elements with markers of oxidative stress. Blood and ejaculate from 10 male carp were collected in the summer period on the experimental pond in Kolínany (West Slovak Lowland). Reactive oxygen species (ROS), total antioxidant capacity (TAC), protein carbonyls (PC), and malondialdehyde (MDA) levels were measured in blood serum and ejaculate using spectrophotometric methods. The amounts of elements (Ag, Al, Ba, Co, Li, Mo, Ca, K, Na, and Mg) in all samples were quantified using inductively coupled plasma optical emission spectrophotometry. Data demonstrated significant differences in elemental concentrations between blood and ejaculate, specifically significantly higher ejaculate levels were detected for Ag, Al, Ba, Co, Li, Mo, K, and Mg. Potassium was the most abundant macro-element in the ejaculate, while sodium was the most abundant in blood serum. Among the micro-elements, Al was predominant in both types of samples. It is noteworthy that oxidative status markers including ROS, TAC, and MDA were significantly higher in ejaculate indicating the presence of oxidative stress in C. carpio reproductive tissue. The positive correlations between Mg and Ca in blood serum and ejaculate suggest these elements play a functional role in metabolic and physiological processes. In contrast, the positive correlations of Ba and Al with markers of oxidative stress indicated the association of these metals with induction of oxidative stress. Our findings provide insights into the association of metals with biomarkers of physiological function as well as adverse effects in C. carpio.

Size-dependent renal filtration model explains human pharmacokinetics of a functional nanoparticle: The SPAGOPIX-01 clinical trial.

The pharmacokinetics in patients dosed with the nanoparticle-based MRI contrast agent SN132D is explained by a size dependent clearance mechanism and this behavior was modeled numerically. Blood samples from 14 patients were analyzed for silicon (a component of the nanoparticle) by ICP-OES. The pharmacokinetic model has only one free parameter and relies on a measured size distribution of the contrast agent and well-established properties of the renal and cardiovascular systems. The model fits well (R2 = 0.9910) with experimental data from samples taken from ten minutes to two weeks after start of infusion. These results support that the cut-off diameter for human renal filtration is 5.5 nm. The agreement between experiment and model implies that there is little or no plasma protein binding to the nanoparticles.

Improvement of Alginate Extraction from Brown Seaweed (Laminaria digitata L.) and Valorization of Its Remaining Ethanolic Fraction.

This study aimed to improve the conventional procedure of alginate isolation from the brown seaweed (Laminaria digitata L.) biomass and investigate the possibility of further valorization of the ethanolic fraction representing the byproduct after the degreasing and depigmentation of biomass. The acid treatment of biomass supported by ultrasound was modeled and optimized regarding the alginate yield using a response surface methodology based on the Box-Behnken design. A treatment time of 30 min, a liquid-to-solid ratio of 30 mL/g, and a treatment temperature of 47 °C were proposed as optimal conditions under which the alginate yield related to the mass of dry biomass was 30.9%. The use of ultrasonic radiation significantly reduced the time required for the acid treatment of biomass by about 4 to 24 times compared to other available conventional procedures. The isolated alginate had an M/G ratio of 1.08, which indicates a greater presence of M-blocks in its structure and the possibility of forming a soft and elastic hydrogel with its use. The chemical composition of the ethanolic fraction including total antioxidant content (293 mg gallic acid equivalent/g dry weight), total flavonoid content (14.9 mg rutin equivalent/g dry weight), contents of macroelements (the highest content of sodium, 106.59 mg/g dry weight), and microelement content (the highest content of boron, 198.84 mg/g dry weight) was determined, and the identification of bioactive compounds was carried out. The results of ultra high-performance liquid chromatography-electrospray ionization-tandem mass spectrometry analysis confirmed the presence of 48 compounds, of which 41 compounds were identified as sugar alcohol, phenolic compounds, and lipids. According to the 2,2-diphenyl-1-picrylhydrazyl assay, the radical scavenging activity of the ethanolic fraction (the half-maximal inhibitory concentration of 42.84 ± 0.81 µg/mL) indicated its strong activity, which was almost the same as in the case of the positive control, synthetic antioxidant butylhydroxytoluene (the half-maximal inhibitory concentration of 36.61 ± 0.79 µg/mL). Gram-positive bacteria (Staphylococcus aureus, Enterococcus faecalis, and Bacillus cereus) were more sensitive to the ethanolic fraction compared to Gram-negative bacteria (Escherichia coli, Pseudomonas aeruginosa, and Shigella sonnei). The obtained results indicated the possibility of the further use of the ethanolic fraction as a fertilizer for plant growth in different species and antifouling agents, applicable in aquaculture.

Machine Learning-Based Classification of Soil Parent Materials Using Elemental Concentration and Vis-NIR Data.

In soil science, the allocation of soil samples to their respective origins holds paramount significance, as it serves as a crucial investigative tool. In recent times, with the increasing use of proximal sensing and advancements in machine-learning techniques, new approaches have accompanied these developments, enhancing the effectiveness of soil utilization in soil science. This study investigates soil classification based on four parent materials. For this purpose, a total of 59 soil samples were collected from 12 profiles and the vicinity of each profile at a depth of 0-30 cm. Surface soil samples were analyzed for elemental concentrations using X-Ray fluorescence (XRF) and inductively coupled plasma-optical emission spectrometry (ICP-OES) and soil spectra using a visible near-infrared (Vis-NIR) spectrometer. Soil samples collected from soil profiles (12 soil samples) and surface (47 soil samples) were used to classify parent materials using machine learning-based algorithms such as Support Vector Machine (SVM), Ensemble Subspace k-Near Neighbor (ESKNN), and Ensemble Bagged Trees (EBTs). Additionally, as a validation of the classification techniques, the dataset was subjected to five-fold cross-validation and independent sample set splitting (80% calibration and 20% validation). Evaluation metrics such as accuracy, F score, and G mean were used to evaluate prediction performance. Depending on the dataset and algorithm used, the classification success rates varied between 70% and 100%. Overall, the ESKNN (99%) produced better results than other classification methods. Additionally, Relief algorithms were employed to identify key variables for each dataset (ICP-OES: CaO, Fe2O3, Al2O3, MgO, and MnO; XRF: SiO2, CaO, Fe2O3, Al2O, and MnO; Vis-NIR: 567, 571, 572, 573, and 574 nm). Subsequent soil reclassification using these reduced variables revealed reduced accuracies using Vis-NIR data, with ESKNN still yielding the best results.

The Influence of the Soil Profile on the Formation of the Elemental Image of Grapes and Wine of the Cabernet Sauvignon Variety.

The features for assessing the authenticity of wines by region of origin are studied, based on the relationship between the mineral composition of the wine, the grapes, and the soil profile (0 to 160 cm) from the place of growth of Cabernet Sauvignon grapes. Soil, grape, and wine samples were taken from the territories of six vineyards in the Anapa district of Krasnodar Territory, Russia. Using the methods of ICP-OES, thermal, and X-ray phase analysis, the soils were differentiated into three groups, differing in mineralogical and mineral compositions. The soil samples of the first group contained up to 31% quartz, the second group up to 25% quartz and 19% mixed calcite, and the third group up to 32% calcite and 15% quartz. The formation of the elemental image of the grapes was studied, taking into account the total content and mobile forms of metals in the soil. The territorial proximity of the vineyards did not affect the extraction of elements from the soil into the grape berry, and the migration of metals for each territory was selective. According to the values of the biological absorption coefficient, the degree of transition of metals from the soil to a berry was estimated. For K, Ti, Zn, Rb, Cu, and Fe in all berries, the coefficient was higher than 1.00, which means that the berry extracts contained not only mobile-form, but also difficult-to-dissolve metal compounds. The migration of macro-components from the soil to the berry was low, and amounted to 6-7% for Ca, 0.8-3.0% for Na, and 25-70% for Mg of the concentration of their mobile forms. For all territories, the maximum correlation between metal concentrations in grapes and soil was observed for samples from a depth of 0-40 cm. The discriminant model based on concentrations of Rb, Al, K, Sr, Co, Na, Pb, Ca, and Ni showed the formation of clusters in the territories of vineyard cultivation. The developed model allow the problems of identifying wines by region to be solved with high accuracy, using their elemental image.

Elemental Fingerprinting of Pecorino Romano and Pecorino Sardo PDO: Characterization, Authentication and Nutritional Value.

Sardinia, located in Italy, is a significant producer of Protected Designation of Origin (PDO) sheep cheeses. In response to the growing demand for high-quality, safe, and traceable food products, the elemental fingerprints of Pecorino Romano PDO and Pecorino Sardo PDO were determined on 200 samples of cheese using validated, inductively coupled plasma methods. The aim of this study was to collect data for food authentication studies, evaluate nutritional and safety aspects, and verify the influence of cheesemaking technology and seasonality on elemental fingerprints. According to European regulations, one 100 g serving of both cheeses provides over 30% of the recommended dietary allowance for calcium, sodium, zinc, selenium, and phosphorus, and over 15% of the recommended dietary intake for copper and magnesium. Toxic elements, such as Cd, As, Hg, and Pb, were frequently not quantified or measured at concentrations of toxicological interest. Linear discriminant analysis was used to discriminate between the two types of pecorino cheese with an accuracy of over 95%. The cheese-making process affects the elemental fingerprint, which can be used for authentication purposes. Seasonal variations in several elements have been observed and discussed.

Recent Advances in the Determination of Major and Trace Elements in Plants Using Inductively Coupled Plasma Optical Emission Spectrometry.

Interest in measuring major and trace elements in plants has increased in recent years because of growing concerns about the elements' contribution to daily intakes or the health risks posed by ingesting vegetables contaminated by potentially toxic elements. The recent advances in using inductively coupled plasma atomic emission spectrometry (ICP-OES) to measure major and trace elements in plant samples are reviewed in the present work. The sample preparation before instrumental determination and the main advantages and limitations of ICP-OES are described. New trends in element extraction in liquid solutions using fewer toxic solvents and microextractions are observed in recently published literature. Even though ICP-OES is a well-established and routine technique, recent innovations to increase its performance have been found. Validated methods are needed to ensure the obtaining of reliable results. Much research has focused on assessing principal figures of merit, such as limits of detection, quantification, selectivity, working ranges, precision in terms of repeatability and reproducibility, and accuracy through spiked samples or certified reference materials analysis. According to the published literature, the ICP-OES technique, 50 years after the release of the first commercially available equipment, remains a powerful and highly recommended tool for element determination on a wide range of concentrations.

Investigation of mercury contamination in lipstick sold in the Saudi market and the potential health risk.

Background: Environmental contamination is a significant global health issue, with cosmetics and pharmaceuticals being major polluters. High concentrations of heavy metals, such as Hg, have been found to have toxic effects and may pose a threat to human health. This study aimed to determine the concentration of mercury (Hg) in lipsticks available in the Saudi Arabia market.Methods: In this study, 12 lipstick samples from three colors were analyzed using inductively coupled plasma optical emission spectrometry (ICP-OES) to measure the content of Hg.Results: The concentration range of Hg was 0.004-0.296 ppm. Moreover, the systemic exposure dosage of mercury in the lipstick samples examined in this study ranged from 5.01 × 10-8 to 1.43 × 10-6 µg/kg bw/day, while the range of the margin of safety was from 7.3 × 109 to 2.2 × 108.Discussion: The Hg concentration in all analyzed samples was less than 0.50 and 1 ppm, which indicated that the Hg level was within acceptable limits according to Saudi Standards, Metrology and Quality Organisation (SASO) and the United States Food and Drug Administration (US FDA), respectively. On the other hand, the calculated margin of safety values for mercury exceeded the safe standard established by the WHO. The results derived from using hazard quotient (HQ) indices depict the potential carcinogenic health risk posed to consumers who employ red-colored lipsticks.

Assessment of physicochemical properties and radioactivity in groundwater at households living in bac Lieu province, vietnam.

This paper presents findings on groundwater physiochemical composition and radioactivity levels in households in Bac Lieu province, Vietnam. Through discriminant analysis, it was observed that groundwater quality exhibits spatial variations corresponding to saline intrusion zones. The paired-samples T-tests revealed significantly different ratios of Ra-224, Ra-226, and Ra-228 isotopes between Na-Cl and Ca-Na-HCO3 water types. All three water types had a ratio of Ra-226/Ra-228 of approximately one, indicating the presence of groundwater aquifers beneath the crust and fluvial marine sediment. Furthermore, strong associations between sulfate and calcium suggest that CO2 enrichment in groundwater aquifers indicates anoxic aquatic environments. Twenty-five of the thirty-three evaluated samples exceeded the national technical regulations for domestic water quality with parameters such as chloride, sulfate, sodium, gross alpha, or total dissolved solids. Fifteen samples exceeded gross alpha's allowable contamination threshold of 0.1 Bq/L. The combination of Ra-226 and Ra-228 did not surpass the U.S. Environmental Protection Agency's recommended limit of 0.185 Bq/L. However, nineteen samples exhibited annual committed effective doses of radium isotopes for infants that exceeded the WHO recommendation of 0.1 mSv/year.

The effect of soil types, pH, and geographical locations on carcinogenic metal buildup in Oryza sativa cultivated in Ghana.

This study investigated the impact of soil type, pH, and geographical locations on the accumulation of arsenic (As), lead (Pb), and cadmium (Cd) in rice grains cultivated in Ghana. One hundred rice farms for the sampling of rice grains and soil were selected from two regions in Ghana-Volta and Oti. The concentrations of As, Pb, and Cd were analyzed using ICP-OES. Speciation modeling and multivariate statistics were employed to ascertain the relations among measured parameters. The results showed significant variations in soil-As, Pb, and Cd levels across different soil types and pH ranges, with the highest soil-As and Cd found in alkaline vertisols. For soil-As and Cd, the vertisols with a pH more than 7.0 exhibited the highest mean concentration of As (2.51 ± 0.932 mgkg-1) and Cd (1.00 ± 0.244 mgkg-1) whereas for soil-Pb, the luvisols of soil types with a pH less than 6.0 exhibited the highest mean concentration of Pb (4.91 ± 1.540 mgkg-1). Grain As, Pb, and Cd also varied across soil types and pH levels. In regards to grain-As, the vertisols soil type, with a pH less than 6.0, shows the highest mean concentration of grain As, at 0.238 ± 0.107 mgkg-1. Furthermore, vertisols soil types with a pH level less than 6.0 showed the highest mean concentration of grain Cd, averaging at 0.231 ± 0.068 mgkg-1 while luvisols, with a pH less than 6.0, exhibited the highest mean concentration of grain Pb at 0.713 ± 0.099 mgkg-1. Speciation modeling indicated increased bioavailability of grains Cd2+ and Pb2+ ions in acidic conditions. A significant interaction was found between soil-Cd and pH, affecting grain-As uptake. The average concentrations of soil As, Pb, and Cd aligned with international standards. Generally, the carcinogenic metals detected in grain samples collected from the Volta region are higher than that of the Oti region but the differences are insignificant, and this may be attributed to geographical differences and anthropogenic activities. About 51% of the study area showed a hazard risk associated with grain metal levels, although, no carcinogenic risks were recognized. This study highlights the complex soil-plant interactions governing metal bioaccumulation and emphasizes the need for tailored strategies to minimize metal transfer into grains.

Electrocoagulation using Ti/Ti for the remediation and reuse of aqueous Dispersive Blue-79.

The entire ecology is contaminated by the synthetic dyes that are widely utilised in the textile industries. They can be handled using a variety of technologies, but an eco-friendly method called electrocoagulation has been used to prevent additional contamination. Textile wastewater containing disperse dyes are successfully treated in Electrocoagulation (EC) utilizing Al, Fe, and Stainless Steel (SS), but it is not cost effective, also the treated water contains certain mg/L of the metals used, along with dye components, which obstructs the reuse of the same. The effects of initial pH, applied voltage, dye concentration, supporting electrolyte, and treatment time on the colour removal efficiency (CRE) and consumption of energy were examined in EC process followed by activated charcoal filtration (hybrid process) with a monopolar Ti/Ti electrode on the remediation of aqueous solution of Dispersive Blue-79 (dye 3G). The maximum CREobtained was 99.4%, chemical oxygen demand (COD) 93%, and biological oxygen demand (BOD) 85%, under the following optimized operating conditions, applied voltage 15 V, pH = 7, concentration of dye, electrolyte 110 mg/L, 0.2 g/L and time = 15 min. The overall operating cost for the treatment of aqueous dye 3G was 0.455US/m3. The mechanism of EC was studied using XPS analysis in the sludge obtained. For the purpose of the reuse, FTIR, AAS, and ICP-OES analysis were done and compared with the aqueous dye 3G, after EC and hybrid process to ensure the maximum removal of the degraded dye components and metal. ICP-OES results showed that there were no traces of metal in the treated aqueous dye 3G using this method. Throughout the study, the experimental outcomes indicated that the hybrid process upgraded the quality of the treated aqueous dye 3G.

Determination of trace elements content of fruits from Tehran's market using ICP- OES method: a risk assessment study.

For the first time in Iran, in this study, the amount of 19 trace elements in some types of commonly consumed Iranian fruits (in their peel and pulp) was evaluated by ICP-OES (Inductively coupled plasma-optical emission spectrometry) method. Based on the outcomes, the highest and lowest average detected elements in all fruits samples were related to (Al) aluminum (1842.18) and (V) vanadium (0.28) ppm, respectively. Mercury (Hg) and antimony (Sb) were not detected (ND) in any samples. Also, the maximum mean of elements in quince, lemon, grapefruit, kiwi, orange south, orange north and tangerine samples was related to(Fe) iron (2048.32 ppm), (Zn)zinc(753.45 ppm), Fe (1056.33 ppm), Al (9794.41 ppm), Zn (717.78 ppm), Fe (1334.87 ppm) and Fe (974.93 ppm), respectively. Furthermore, our outcomes revealed, the highest mean of elements in kiwi peel, kiwi pulp, orange North peel, orange North pulp, orange South peel, orange South pulp, quince peel, quince pulp, grapefruit peel, grapefruit pulp, lemon peel, lemon pulp, tangerine peel and tangerine pulp was related to Al (17967.79 ppm), Al (1621.03 ppm), Fe (1350.01 ppm), Al (1457.66 ppm), Zn (934.71 ppm), Fe (728.06 ppm), Fe (2768.11 ppm), Fe (1328.54 ppm), Zn (1008.54 ppm), Fe (1198.00 ppm), Zn (683.35 ppm), Zn (823.55 ppm), Fe (1182.59 ppm), and Fe (767.27 ppm), respectively. Based on the Monte Carlo simulation results, the THQ (target hazard quotient) and ILCR (Incremental Lifetime Cancer Risk) related to exposure to heavy metals via fruits for adults and children showed that there is no significant non-carcinogenic risk (THQ < 1) and carcinogenic risk (ILCR < 1E-4) for adults and children.

Source Identification of Potentially Toxic Metals in Plants of Alpine Ecosystems of Mt. Madra by Positive Matrix Factorization.

In this study, the concentrations of cadmium (Cd), iron (Fe), manganese (Mn), nickel (Ni), lead (Pb) and zinc (Zn) in plants sampled from Mt. Madra were investigated. Furthermore, the distribution characteristics and source identification of potentially toxic metals were investigated with the application of Positive Matrix Factorization (PMF) modelling. Samples of 26 different plant species were taken from Mt. Madra at elevations ranging from 177 to 1347 m using the multi-point sampling approach. The metal quantities measured by ICP-OES are the following sequences (mean ± SD) (mg/kg): Fe (974.96 ± 29.6) > Mn (111.81 ± 2.6) > Zn (27.28 ± 0.2) > Ni (2.17 ± 0.03) > Pb (0.77 ± 0.01) > Cd (0.12 ± 0.01). According to the plant samples in which the highest values were determined, the metals are as follows: Cd (Lathyrus laxiflorus, 0.401 mg/kg), Fe (Ajuga orientalis, 7621.207 mg/kg), Mn (Castanea sativa, 724.927 mg/kg), Ni (Prunella laciniata, 6.947 mg/kg), Pb (Crataegus stevenii, 3.955 mg/kg) and Zn (Prunella laciniata, 50.802 mg/kg). The results of the PMF model showed that Cd had an atmospheric transport factor originated and transported from industrial activites, Ni had a substrate factor, Fe, Mn, Pb and Zn were influenced by different anthropogenic factors.

Evaluation of elements in hair samples of children with developmental language disorder (DLD).

BACKGROUND: Recent studies have highlighted a role for trace elements and toxic metals across neurodevelopmental disorders, including developmental stuttering, Autistic Spectrum Disorders (ASD), and Attention Deficit/Hyperactivity Disorder (ADHD). However, these environmental influences have yet to be explored in relation to Developmental Language Disorder (DLD). METHODS: Elemental hair composition of seven elements; zinc (64Zn), magnesium (26Mg), iron (57Fe), potassium (39K), aluminum (27Al), lead (208Pb), and barium (138Ba) were analyzed in hair samples from 35 children affected by DLD and 35 controls with typical language development (TLD) using both inductive coupled plasma optical emission spectroscopy (ICP-OES) and inductive coupled plasma mass spectroscopy (ICP-MS). RESULTS: The concentration of 64Zn was significantly lower in the hair of DLD group compared to the TLD control group. All other elements showed similar levels between cases and controls. This pilot study demonstrates the utility of trace elements and toxic metals screening in relation to language disorders and the use of hair samples in such investigations. CONCLUSION: The finding that zinc levels differed between cases and controls could represent a clinically relevant result and should be replicated in larger sample size across time. A wider battery of related elements will help to better understand the role of trace elements and toxic metals in DLD.

Elemental Profile of Propolis from Different Areas of Serbia.

Propolis is a resinous natural substance collected by honeybees from different plant sources. The element content of propolis is influenced by the content of elements in the soil, climatic factors, and the degree of pollution. The aim of the study was to characterize element composition and content of toxic elements in 51 propolis collected from different locations in Serbia and to evaluate the differences among them. Determination of the 21 elements were performed using Inductively coupled plasma - optical emission spectrometry. K was the most abundant element, followed by Ca, Mg, Si, Fe, Zn, and Al. The microelements B, Ba, Mn, Na, Pb, and Ti were also present in propolis, while Co, Cr, Cu, Mo, Ni, Sr, and V were found in trace. Toxic elements such as Pb, As, and Cd were found in the trace. Kruskal-Wallis tests differentiate groups of samples by geographical origin. The presence of B, Fe, Sr, Ti, Zn, and As demonstrated statistical significance between six regions of Serbia.

Determination of Minerals in Soft and Hard Cheese Varieties by ICP-OES: A Comparison of Digestion Methods.

For sample preparation prior to mineral analysis, microwave digestion (~2 h) is quicker and requires lower acid volume as compared to dry (6-8 h) and wet digestion (4-5 h). However, microwave digestion had not yet been compared systematically with dry and wet digestion for different cheese matrices. In this work, the three digestion methods were compared for measuring major (Ca, K, Mg, Na and P) and trace minerals (Cu, Fe, Mn and Zn) in cheese samples using inductively coupled plasma optical emission spectrometry (ICP-OES). The study involved nine different cheese samples with moisture content varying from 32 to 81% and a standard reference material (skim milk powder). For the standard reference material, the relative standard deviation was lowest for microwave digestion (0.2-3.7%) followed by dry (0.2-6.7%) and wet digestion (0.4-7.6%). Overall, for major minerals in cheese, strong correlation was observed between the microwave and the dry and wet digestion methods (R2 = 0.971-0.999), and Bland-Altman plots showed best method agreement (lowest bias), indicating the comparability of all three digestion methods. A lower correlation coefficient, higher limits of agreement and higher bias of minor minerals indicate possibilities of measurement error.

The Identity and Mineral Composition of Natural, Plant-Derived and Artificial Sweeteners.

The qualitative X-ray phase analysis of natural and artificial food sweeteners was applied to trace the authenticity of such food additives. The mineral composition of different sweeteners commonly added to foods was studied to estimate their mineral profiles and assess the risk related to the toxic elements intake caused by sweetener consumption. The concentration of twenty elements (Ag, Al, B, Ba, Bi, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Mo, Ni, Pb, Sr, Ti, V, and Zn) was measured using the inductively coupled plasma-optical emission spectroscopy (ICP-OES) method after the representative samples were wet-digested with a concentrated nitric acid and hydrogen peroxide mixture in a closed-vessel microwave-assisted system. Differences between the mineral compositions of the examined sweeteners were statistically evaluated and discussed. The relationships between the concentrations of the elements determined in the analyzed sweeteners were also investigated. The successful application of the X-ray powder diffraction method proved the identity of all investigated sweeteners; all the analyzed products contained the expected sweetening agent. The results of the quantification of all the elements in the examined sweeteners indicated that these products cannot be considered nutritionally dense. Hence, the presence of toxic elements like Cd, Cr, Ni, and Pb distinctly indicates the need to test such products to guarantee their quality and ensure consumer safety.

Dispersive Micro-Solid Phase Extraction Using a Graphene Oxide Nanosheet with Neocuproine and Batocuproine for the Preconcentration of Traces of Metal Ions in Food Samples.

A dispersive micro-solid phase extraction (Dµ-SPE) method for the preconcentration of trace metal ions (Pb, Cd, Cr, Mn, Fe, Co, Ni, Cu, Zn) on graphene oxide with the complexing reagents neocuproine or batocuproine is presented here. Metal ions form cationic complexes with neocuproine and batocuproine. These compounds are adsorbed on the GO surface via electrostatic interactions. The factors affecting the separation and preconcentration of analytes such as pH, eluent (concentration, type, volume), amount of neocuproine, batocuproine and GO, mixing time, and sample volume were optimized. The optimal sorption pH was 8. The adsorbed ions were effectively eluted with 5 mL 0.5 mol L-1 HNO3 solution and determined by the ICP-OES technique. The preconcentration factor for the GO/neocuproine and GO/batocuproine in the range 10-100 and 40-200 was obtained for the analytes, with detection limits of 0.035-0.84 ng mL-1 and 0.047-0.54 ng mL-1, respectively. The method was validated by the analysis of the three certified reference materials: M-3 HerTis, M-4 CormTis, and M-5 CodTis. The procedure was applied to determine metal levels in food samples.

Possibilities and Limitations of ICP-Spectrometric Determination of the Total Content of Tin, Its Inorganic and Organic Speciations in Waters with Different Salinity Levels-Part 1: Determination of the Total Tin Content.

This paper considers the features of determining the total tin content in waters with different salinity. Direct ICP-spectrometric analysis of sea waters with a salinity of more than 6‱ significantly reduced the analytical signal of tin by 70% (ICP-MS) and 30% (ICP-OES). The matrix effect of macrocomponents was eliminated by generating hydrides using 0.50 M sodium borohydride and 0.10 M hydrochloric acid. The effect of transition metals on the formation of tin hydrides was eliminated by applying L-cysteine at a concentration of 0.75 g/L. The total analyte concentrations, considering the content of organotin compounds, were determined after microwave digestion of sample with oxidizing mixtures based on nitric acid. The generation of hydrides with the ICP-spectrometric determination of tin leveled the influence of the sea water matrix and reduced its detection limit from 0.50 up to 0.05 µg/L for all digestion schemes. The developed analysis scheme made it possible to determine the total content of inorganic and organic forms of tin in sea waters. The total content of tin was determined in the waters of the Azov and Black seas at the levels of 0.17 and 0.24 µg/L, respectively.