sEMG-based automatic characterization of swallowed materials.

Monitoring of ingestive activities is critically important for managing the health and wellness of individuals with various health conditions, including the elderly, diabetics, and individuals seeking better weight control. Monitoring swallowing events can be an ideal surrogate for developing streamlined methods for effective monitoring and quantification of eating or drinking events. Swallowing is an essential process for maintaining life. This seemingly simple process is the result of coordinated actions of several muscles and nerves in a complex fashion. In this study, we introduce automated methods for the detection and quantification of various eating and drinking activities. Wireless surface electromyography (sEMG) was used to detect chewing and swallowing from sEMG signals obtained from the sternocleidomastoid muscle, in addition to signals obtained from a wrist-mounted IMU sensor. A total of 4675 swallows were collected from 55 participants in the study. Multiple methods were employed to estimate bolus volumes in the case of fluid intake, including regression and classification models. Among the tested models, neural networks-based regression achieved an R2 of 0.88 and a root mean squared error of 0.2 (minimum bolus volume was 10 ml). Convolutional neural networks-based classification (when considering each bolus volume as a separate class) achieved an accuracy of over 99% using random cross-validation and around 66% using cross-subject validation. Multiple classification methods were also used for solid bolus type detection, including SVM and decision trees (DT), which achieved an accuracy above 99% with random validation and above 94% in cross-subject validation. Finally, regression models with both random and cross-subject validation were used for estimating the solid bolus volume with an R2 value that approached 1 and root mean squared error values as low as 0.00037 (minimum solid bolus weight was 3 gm). These reported results lay the foundation for a cost-effective and non-invasive method for monitoring swallowing activities which can be extremely beneficial in managing various chronic health conditions, such as diabetes and obesity.

Effect of test duration and sensor location on the reliability of standing balance parameters derived using body-mounted accelerometers.

BACKGROUND: Balance parameters derived from wearable sensor measurements during postural sway have been shown to be sensitive to experimental variables such as test duration, sensor number, and sensor location that influence the magnitude and frequency-related properties of measured center-of-mass (COM) and center-of-pressure (COP) excursions. In this study, we investigated the effects of test duration, the number of sensors, and sensor location on the reliability of standing balance parameters derived using body-mounted accelerometers. METHODS: Twelve volunteers without any prior history of balance disorders were enrolled in the study. They were asked to perform two 2-min quiet standing tests with two different testing conditions (eyes open and eyes closed). Five inertial measurement units (IMUs) were employed to capture postural sway data from each participant. IMUs were attached to the participants' right legs, the second sacral vertebra, sternum, and the left mastoid processes. Balance parameters of interest were calculated for the single head, sternum, and sacrum accelerometers, as well as, a three-sensor combination (leg, sacrum, and sternum). Accelerometer data were used to estimate COP-based and COM-based balance parameters during quiet standing. To examine the effect of test duration and sensor location, each 120-s recording from different sensor locations was segmented into 20-, 30-, 40-, 50-, 60-, 70-, 80-, 90-, 100-, and 110-s intervals. For each of these time intervals, time- and frequency-domain balance parameters were calculated for all sensor locations. RESULTS: Most COM-based and COP-based balance parameters could be derived reliably for clinical applications (Intraclass-Correlation Coefficient, ICC ≥ 0.90) with a minimum test duration of 70 and 110 s, respectively. The exceptions were COP-based parameters obtained using a sacrum-mounted sensor, especially in the eyes-closed condition, which could not be reliably used for clinical applications even with a 120-s test duration. CONCLUSIONS: Most standing balance parameters can be reliably measured using a single head- or sternum-mounted sensor within a 120-s test duration. For other sensor locations, the minimum test duration may be longer and may depend on the specific test conditions.

A Novel, Wearable Inertial Measurement Unit for Stroke Survivors: Validity, Acceptability, and Usability.

OBJECTIVE: To establish the concurrent validity, acceptability, and sensor optimization of a consumer-grade, wearable, multi-sensor system to capture quantity and quality metrics of mobility and upper limb movements in stroke survivors. DESIGN: Single-session, cross-sectional. SETTING: Clinical research laboratory. PARTICIPANTS: Thirty chronic stroke survivors (age 57 (10) years; 33% female) with mild to severe motor impairments participated. INTERVENTIONS: Not Applicable. MAIN OUTCOME MEASURES: Participants donned 5 sensors and performed standardized assessments of mobility and upper limb (UL) movement. True/false, positive/negative time in active movement for the UL were calculated and compared to criterion-standards using an accuracy rate. Bland-Altman plots and linear regression models were used to establish concurrent validity of UL movement counts, step counts, and stance time symmetry of MiGo against established criterion-standard measures. Acceptability and sensor optimization were assessed through an end-user survey and decision matrix. RESULTS: Mobility metrics showed excellent association with criterion-standards for step counts (video: r=0.988, P<.001, IMU: r=0.921, P<.001) and stance-time symmetry (r=0.722, P<.001). In the UL, movement counts showed excellent to good agreement (paretic: r=0.849, P<.001, nonparetic: r=0.672, P<.001). Accuracy of active movement time was 85.2% (paretic) and 88.0% (nonparetic) UL. Most participants (63.3%) had difficulty donning/doffing the sensors. Acceptability was high (4.2/5). CONCLUSIONS: The sensors demonstrated excellent concurrent validity for mobility metrics and UL movements of stroke survivors. Acceptability of the system was high, but alternative wristbands should be considered.

Sarcopenia screening based on the assessment of gait with inertial measurement units: a systematic review.

BACKGROUND: Gait variables assessed by inertial measurement units (IMUs) show promise as screening tools for aging-related diseases like sarcopenia. The main aims of this systematic review were to analyze and synthesize the scientific evidence for screening sarcopenia based on gait variables assessed by IMUs, and also to review articles that investigated which gait variables assessed by IMUs were related to sarcopenia. METHODS: Six electronic databases (PubMed, SportDiscus, Web of Science, Cochrane Library, Scopus and IEEE Xplore) were searched for journal articles related to gait, IMUs and sarcopenia. The search was conducted until December 5, 2023. Titles, abstracts and full-length texts for studies were screened to be included. RESULTS: A total of seven articles were finally included in this review. Despite some methodological variability among the included studies, IMUs demonstrated potential as effective tools for detecting sarcopenia when coupled with artificial intelligence (AI) models, which outperformed traditional statistical methods in classification accuracy. The findings suggest that gait variables related to the stance phase such as stance duration, double support time, and variations between feet, are key indicators of sarcopenia. CONCLUSIONS: IMUs could be useful tools for sarcopenia screening based on gait analysis, specifically when artificial intelligence is used to process the recorded data. However, more development and research in this field is needed to provide an effective screening tool for doctors and health systems.

Objective clinical registration of tremor, bradykinesia, and rigidity during awake stereotactic neurosurgery: a scoping review.

Tremor, bradykinesia, and rigidity are incapacitating motor symptoms that can be suppressed with stereotactic neurosurgical treatment like deep brain stimulation (DBS) and ablative surgery (e.g., thalamotomy, pallidotomy). Traditionally, clinicians rely on clinical rating scales for intraoperative evaluation of these motor symptoms during awake stereotactic neurosurgery. However, these clinical scales have a relatively high inter-rater variability and rely on experienced raters. Therefore, objective registration (e.g., using movement sensors) is a reasonable extension for intraoperative assessment of tremor, bradykinesia, and rigidity. The main goal of this scoping review is to provide an overview of electronic motor measurements during awake stereotactic neurosurgery. The protocol was based on the PRISMA extension for scoping reviews. After a systematic database search (PubMed, Embase, and Web of Science), articles were screened for relevance. Hundred-and-three articles were subject to detailed screening. Key clinical and technical information was extracted. The inclusion criteria encompassed use of electronic motor measurements during stereotactic neurosurgery performed under local anesthesia. Twenty-three articles were included. These studies had various objectives, including correlating sensor-based outcome measures to clinical scores, identifying optimal DBS electrode positions, and translating clinical assessments to objective assessments. The studies were highly heterogeneous in device choice, sensor location, measurement protocol, design, outcome measures, and data analysis. This review shows that intraoperative quantification of motor symptoms is still limited by variable signal analysis techniques and lacking standardized measurement protocols. However, electronic motor measurements can complement visual evaluations and provide objective confirmation of correct placement of the DBS electrode and/or lesioning. On the long term, this might benefit patient outcomes and provide reliable outcome measures in scientific research.

Automated, IMU-based spine angle estimation and IMU location identification for telerehabilitation.

BACKGROUND: Telerehabilitation is a promising avenue for improving patient outcomes and expanding accessibility. However, there is currently no spine-related assessment for telerehabilitation that covers multiple exercises. METHODS: We propose a wearable system with two inertial measurement units (IMUs) to identify IMU locations and estimate spine angles for ten commonly prescribed spinal degeneration rehabilitation exercises (supine chin tuck head lift rotation, dead bug unilateral isometric hold, pilates saw, catcow full spine, wall angel, quadruped neck flexion/extension, adductor open book, side plank hip dip, bird dog hip spinal flexion, and windmill single leg). Twelve healthy subjects performed these spine-related exercises, and wearable IMU data were collected for spine angle estimation and IMU location identification. RESULTS: Results demonstrated average mean absolute spinal angle estimation errors of 2.59 ∘ and average classification accuracy of 92.97%. The proposed system effectively identified IMU locations and assessed spine-related rehabilitation exercises while demonstrating robustness to individual differences and exercise variations. CONCLUSION: This inexpensive, convenient, and user-friendly approach to spine degeneration rehabilitation could potentially be implemented at home or provide remote assessment, offering a promising avenue to enhance patient outcomes and improve accessibility for spine-related rehabilitation. TRIAL REGISTRATION: No. E2021013P in Shanghai Jiao Tong University.

Validation of IMU against optical reference and development of open-source pipeline: proof of concept case report in a participant with transfemoral amputation fitted with a Percutaneous Osseointegrated Implant.

BACKGROUND: Systems that capture motion under laboratory conditions limit validity in real-world environments. Mobile motion capture solutions such as Inertial Measurement Units (IMUs) can progress our understanding of "real" human movement. IMU data must be validated in each application to interpret with clinical applicability; this is particularly true for diverse populations. Our IMU analysis method builds on the OpenSim IMU Inverse Kinematics toolkit integrating the Versatile Quaternion-based Filter and incorporates realistic constraints to the underlying biomechanical model. We validate our processing method against the reference standard optical motion capture in a case report with participants with transfemoral amputation fitted with a Percutaneous Osseointegrated Implant (POI) and without amputation walking over level ground. We hypothesis that by using this novel pipeline, we can validate IMU motion capture data, to a clinically acceptable degree. RESULTS: Average RMSE (across all joints) between the two systems from the participant with a unilateral transfemoral amputation (TFA) on the amputated and the intact sides were 2.35° (IQR = 1.45°) and 3.59° (IQR = 2.00°) respectively. Equivalent results in the non-amputated participant were 2.26° (IQR = 1.08°). Joint level average RMSE between the two systems from the TFA ranged from 1.66° to 3.82° and from 1.21° to 5.46° in the non-amputated participant. In plane average RMSE between the two systems from the TFA ranged from 2.17° (coronal) to 3.91° (sagittal) and from 1.96° (transverse) to 2.32° (sagittal) in the non-amputated participant. Coefficients of Multiple Correlation (CMC) results between the two systems in the TFA ranged from 0.74 to > 0.99 and from 0.72 to > 0.99 in the non-amputated participant and resulted in 'excellent' similarity in each data set average, in every plane and at all joint levels. Normalized RMSE between the two systems from the TFA ranged from 3.40% (knee level) to 54.54% (pelvis level) and from 2.18% to 36.01% in the non-amputated participant. CONCLUSIONS: We offer a modular processing pipeline that enables the addition of extra layers, facilitates changes to the underlying biomechanical model, and can accept raw IMU data from any vendor. We successfully validate the pipeline using data, for the first time, from a TFA participant using a POI and have proved our hypothesis.

Deep learning model for classifying shoulder pain rehabilitation exercises using IMU sensor.

BACKGROUND: Artificial intelligence is being used for rehabilitation, including monitoring exercise compliance through sensor technology. AI classification of shoulder exercise wearing an IMU sensor has only been reported in normal (i.e. painless) subjects. To prove the feasibility of monitoring exercise compliance, we aimed to classify 11 types of shoulder rehabilitation exercises using an AI (artificial intelligence) algorithm in patients with shoulder pain. We had the patients wear an IMU-based sensor, collected data during exercise, and determined the accuracy of exercise classification. METHODS: Data were collected from 58 patients (27 males, 31 females, age range 37-82 years) diagnosed with shoulder diseases such as adhesive capsulitis and rotator cuff disease. 11 types of shoulder pain rehabilitation exercise programs were developed and repeated each exercise ten times per session while wearing an IMU sensor. The study applied the Rectified Linear Unit (ReLU) and the SoftMax as the activation function for hidden layers, the output layer. RESULTS: The acquired data was used to train a DNN model using the multilayer perceptron algorithm. The trained model was used to classify 11 types of shoulder pain rehabilitation exercises. The training accuracy was 0.975 and the test accuracy was 0.925. CONCLUSION: The study demonstrates that IMU sensor data can effectively classify shoulder pain rehabilitation exercises, providing more appropriate feedback for patients. The model can be utilized to establish a system for remotely monitoring patients' exercise performance. The use of deep learning in patient monitoring and rehabilitation has significant potential to bring innovative changes to healthcare service delivery.

IMU-Assisted Manual 3D-Ultrasound Imaging Using Motion-Constrained Swept-Fan Scans.

Three-dimensional (3D) ultrasonic imaging can enable post-facto plane of interest selection. It can be performed with devices such as wobbler probes, matrix probes, and sensor-based probes. Ultrasound systems that support 3D-imaging are expensive with added hardware complexity compared to 2D-imaging systems. An inertial measurement unit (IMU) can potentially be used for 3D-imaging by using it to track the motion of a one-dimensional array probe and constraining its motion in one degree of freedom (1-DoF) rotation (swept-fan). This work demonstrates the feasibility of an affordable IMU-assisted manual 3D-ultrasound scanner (IAM3US). A consumer-grade IMU-assisted 3D scanner prototype is designed with two support structures for swept-fan. After proper IMU calibration, an appropriate KF-based algorithm estimates the probe orientation during the swept-fan. An improved scanline-based reconstruction method is used for volume reconstruction. The evaluation of the IAM3US system is done by imaging a tennis ball filled with water and the head region of a fetal phantom. From fetal phantom reconstructed volumes, suitable 2D planes are extracted for biparietal diameter (BPD) manual measurements. Later, in-vivo data is collected. The novel contributions of this paper are (1) the application of a recently proposed algorithm for orientation estimation of swept-fan for 3D imaging, chosen based on the noise characteristics of selected consumer grade IMU (2) assessment of the quality of the 1-DoF swept-fan scan with a deflection detector along with monitoring of maximum angular rate during the scan and (3) two probe holder designs to aid the operator in performing the 1-DoF rotational motion and (4) end-to-end 3D-imaging system-integration. Phantom studies and preliminary in-vivo obstetric scans performed on two patients illustrate the usability of the system for diagnosis purposes.

Error Compensation Method for Pedestrian Navigation System Based on Low-Cost Inertial Sensor Array.

In the pedestrian navigation system, researchers have reduced measurement errors and improved system navigation performance by fusing measurements from multiple low-cost inertial measurement unit (IMU) arrays. Unfortunately, the current data fusion methods for inertial sensor arrays ignore the system error compensation of individual IMUs and the correction of position information in the zero-velocity interval. Therefore, these methods cannot effectively reduce errors and improve accuracy. An error compensation method for pedestrian navigation systems based on a low-cost array of IMUs is proposed in this paper. The calibration method for multiple location-free IMUs is improved by using a sliding variance detector to segment the angular velocity magnitude into stationary and motion intervals, and each IMU is calibrated independently. Compensation is then applied to the velocity residuals in the zero-velocity interval after zero-velocity update (ZUPT). The experimental results show a significant improvement in the average noise performance of the calibrated IMU array, with a 3.01-fold increase in static noise performance. In the closed-loop walking experiment, the average horizontal position error of a single calibrated IMU is reduced by 27.52% compared to the uncalibrated IMU, while the calibrated IMU array shows a 2.98-fold reduction in average horizontal position error compared to a single calibrated IMU. After compensating for residual velocity, the average horizontal position error of a single IMU is reduced by 0.73 m, while that of the IMU array is reduced by 64.52%.

The Determination of On-Water Rowing Stroke Kinematics Using an Undecimated Wavelet Transform of a Rowing Hull-Mounted Accelerometer Signal.

Boat acceleration profiles can provide valuable information for coaches and practitioners to make meaningful technical interventions and monitor the determinants of success in rowing. Previous studies have used simple feature detection methods to identify key phases within individual strokes, such as drive onset, drive time, drive offset and stroke time. However, based on skill level, technique or boat class, the hull acceleration profile can differ, making robust feature detection more challenging. The current study's purpose is to employ the undecimated wavelet transform (UWT) technique to detect individual features in the stroke acceleration profile from a single rowing hull-mounted accelerometer. In this investigation, the temporal and kinematic values obtained using the AdMosTM sensor in conjunction with the UWT processing approach were strongly correlated with the comparative measures of the Peach™ instrumented oarlock system. The measures for stroke time displayed very strong agreeability between the systems for all boat classes, with ICC values of 0.993, 0.963 and 0.954 for the W8+, W4- and W1x boats, respectively. Similarly, the drive time was also very consistent, with strong to very strong agreeability, producing ICC values of 0.937, 0.901 and 0.881 for the W8+, W4- and W1x boat classes. Further, a Bland-Altman analysis displayed little to no bias between the AdMosTM-derived and Peach™ measures, indicating that there were no systematic discrepancies between signals. This single-sensor solution could form the basis for a simple, cost-effective and accessible alternative to multi-sensor instrumented systems for the determination of sub-stroke kinematic phases.

Design and Characterization of a Wearable Inertial Measurement Unit.

The utilization of inertial measurement units as wearable sensors is proliferating across various domains, such as health care, sports, and rehabilitation. This expansion has produced a market of devices tailored to accommodate very specific ranges of operational demands. Simultaneously, this growth is creating opportunities for the development of a new class of devices more oriented towards general-purpose use and capable of capturing both high-frequency signals for short-term, event-driven motion analysis and low-frequency signals for extended monitoring. For such a design, which combines flexibility and low cost, a rigorous evaluation of the device in terms of deviation, noise levels, and precision is essential. This evaluation is crucial for identifying potential improvements and refining the design accordingly, yet it is rarely addressed in the literature. This paper presents the development process of such a device. The results of the design process demonstrate acceptable performance in optimizing energy consumption and storage capacity while highlighting the most critical optimizations needed to advance the device towards the goal of a smart, general-purpose unit for human motion monitoring.

Method for Underground Mining Shaft Sensor Data Collection.

The motivation behind this research is the lack of an underground mining shaft data set in the literature in the form of open access. For this reason, our data set can be used for many research purposes such as shaft inspection, 3D measurements, simultaneous localization and mapping, artificial intelligence, etc. The data collection method incorporates rotated Velodyne VLP-16, Velodyne Ultra Puck VLP-32c, Livox Tele-15, IMU Xsens MTi-30 and Faro Focus 3D. The ground truth data were acquired with a geodetic survey including 15 ground control points and 6 Faro Focus 3D terrestrial laser scanner stations of a total 273,784,932 of 3D measurement points. This data set provides an end-user case study of realistic applications in mobile mapping technology. The goal of this research was to fill the gap in the underground mining data set domain. The result is the first open-access data set for an underground mining shaft (shaft depth -300 m).

A Study on Graph Optimization Method for GNSS/IMU Integrated Navigation System Based on Virtual Constraints.

In GNSS/IMU integrated navigation systems, factors like satellite occlusion and non-line-of-sight can degrade satellite positioning accuracy, thereby impacting overall navigation system results. To tackle this challenge and leverage historical pseudorange information effectively, this paper proposes a graph optimization-based GNSS/IMU model with virtual constraints. These virtual constraints in the graph model are derived from the satellite's position from the previous time step, the rate of change of pseudoranges, and ephemeris data. This virtual constraint serves as an alternative solution for individual satellites in cases of signal anomalies, thereby ensuring the integrity and continuity of the graph optimization model. Additionally, this paper conducts an analysis of the graph optimization model based on these virtual constraints, comparing it with traditional graph models of GNSS/IMU and SLAM. The marginalization of the graph model involving virtual constraints is analyzed next. The experiment was conducted on a set of real-world data, and the results of the proposed method were compared with tightly coupled Kalman filtering and the original graph optimization method. In instantaneous performance testing, the method maintains an RMSE error within 5% compared with real pseudorange measurement, while in a continuous performance testing scenario with no available GNSS signal, the method shows approximately a 30% improvement in horizontal RMSE accuracy over the traditional graph optimization method during a 10-second period. This demonstrates the method's potential for practical applications.

Kinematic and Physiological Analysis of Medieval Combat Sport Using Motion Analysis, Blood Lactate Measurement, and Heart Rate Monitoring: A Case Study.

Medieval combat sport is a form of mixed martial art in which combatants engage in fighting using offensive and defensive equipment while dressed in full armor. The sport is considered extremely taxing, making it nearly impossible to maintain the same level of performance. However, this form of sport has not been thoroughly analyzed, and its impact on human physical response is largely unknown. To address this gap, the study reported here aimed to introduce and test a procedure for analyzing human physical responses within the framework of the sport. To accomplish this, two experienced combatants were asked to engage in a series of strikes, performed in the form of a set duel simulating a professional fight competition. The kinematic aspect of the procedure was examined using motion analysis with the help of an IMU suit, while the physiological aspect was evaluated based on blood lactate levels and heart rate measurements. Furthermore, an ergometer test conducted in a laboratory setting aimed to determine the lactate threshold. The duel results showed noticeable decreases in the kinematic aspects of the strikes, such as the velocity of impact, and a dramatic rise in physiological aspects, such as heart rate and blood lactate levels. During the duel sets, the blood lactate surpassed the threshold level, and at the end, the heart rate exceeded the maximum age-related level. Practicing medieval combat sport has been shown to impose an extreme physical load on the bodies of combatants, noticeably affecting their performance levels.

Generisch-Net: A Generic Deep Model for Analyzing Human Motion with Wearable Sensors in the Internet of Health Things.

The Internet of Health Things (IoHT) is a broader version of the Internet of Things. The main goal is to intervene autonomously from geographically diverse regions and provide low-cost preventative or active healthcare treatments. Smart wearable IMUs for human motion analysis have proven to provide valuable insights into a person's psychological state, activities of daily living, identification/re-identification through gait signatures, etc. The existing literature, however, focuses on specificity i.e., problem-specific deep models. This work presents a generic BiGRU-CNN deep model that can predict the emotional state of a person, classify the activities of daily living, and re-identify a person in a closed-loop scenario. For training and validation, we have employed publicly available and closed-access datasets. The data were collected with wearable inertial measurement units mounted non-invasively on the bodies of the subjects. Our findings demonstrate that the generic model achieves an impressive accuracy of 96.97% in classifying activities of daily living. Additionally, it re-identifies individuals in closed-loop scenarios with an accuracy of 93.71% and estimates emotional states with an accuracy of 78.20%. This study represents a significant effort towards developing a versatile deep-learning model for human motion analysis using wearable IMUs, demonstrating promising results across multiple applications.

Assessment of Noise of MEMS IMU Sensors of Different Grades for GNSS/IMU Navigation.

Inertial measurement units (IMUs) are key components of various applications including navigation, robotics, aerospace, and automotive systems. IMU sensor characteristics have a significant impact on the accuracy and reliability of these applications. In particular, noise characteristics and bias stability are critical for proper filter settings to perform a combined GNSS/IMU solution. This paper presents an analysis based on the Allan deviation of different IMU sensors that correspond to different grades of micro-electromechanical systems (MEMS)-type IMUs in order to evaluate their accuracy and stability over time. The study covers three IMU sensors of different grades (ascending order): Rokubun Argonaut navigator sensor (InvenSense TDK MPU9250), Samsung Galaxy Note10 phone sensor (STMicroelectronics LSM6DSR), and NovAtel PwrPak7 sensor (Epson EG320N). The noise components of the sensors are computed using overlapped Allan deviation analysis on data collected over the course of a week in a static position. The focus of the analysis is to characterize the random walk noise and bias stability, which are the most critical for combined GNSS/IMU navigation and may differ or may not be listed in manufacturers' specifications. Noise characteristics are calculated for the studied sensors and examples of their use in loosely coupled GNSS/IMU processing are assessed. This work proposes a structured and reproducible approach for working with sensors for their use in navigation tasks in combination with GNSS, and can be used for sensors of different levels to supplement missing or incorrect sensor manufacturers' data.

Feasibility of Using a GENEActiv Accelerometer with Triaxial Acceleration and Temperature Sensors to Monitor Adherence to Shoulder Sling Wear Following Surgery.

BACKGROUND: Self-reported adherence to sling wear is unreliable due to recall bias. We aim to assess the feasibility and accuracy of quantifying sling wear and non-wear utilising slings pre-fitted with a GENEActiv accelerometer that houses triaxial acceleration and temperature sensors. METHODS: Ten participants were asked to wear slings for 480 min (8 h) incorporating 180 min of non-wear time in durations varying from 5-120 min. GENEActiv devices were fitted in sutured inner sling pockets and participants logged sling donning and doffing times. An algorithm based on variability in acceleration in three axes and temperature change was developed to identify sling wear and non-wear and compared to participants' logs. RESULTS: There was no significant difference between algorithm detected non-wear duration (mean ± standard deviation = 172.0 ± 6.8 min/participant) and actual non-wear (179.7 ± 1.0 min/participant). Minute-by-minute agreement of sensor-detected wear and non-wear with participant reported wear was 97.3 ± 1.5% (range = 93.9-99.0), with mean sensitivity 94.3 ± 3.5% (range = 86.1-98.3) and specificity 99.1 ± 0.8% (range = 93.7-100). CONCLUSION: An algorithm based on accelerometer-assessed acceleration and temperature can accurately identify shoulder sling wear/non-wear times. This method may have potential for assessing whether sling wear adherence after shoulder surgeries have any bearing on patient functional outcomes.

Classifying Motorcyclist Behaviour with XGBoost Based on IMU Data.

Human behaviour detection is relevant in many fields. During navigational tasks it is an indicator for environmental conditions. Therefore, monitoring people while they move along the street network provides insights on the environment. This is especially true for motorcyclists, who have to observe aspects such as road surface conditions or traffic very careful. We thus performed an experiment to check whether IMU data is sufficient to classify motorcyclist behaviour as a data source for later spatial and temporal analysis. The classification was done using XGBoost and proved successful for four out of originally five different types of behaviour. A classification accuracy of approximately 80% was achieved. Only overtake manoeuvrers were not identified reliably.

Transparency as a Means to Analyse the Impact of Inertial Sensors on Users during the Occupational Ergonomic Assessment: A Systematic Review.

The literature has yielded promising data over the past decade regarding the use of inertial sensors for the analysis of occupational ergonomics. However, despite their significant advantages (e.g., portability, lightness, low cost, etc.), their widespread implementation in the actual workplace has not yet been realized, possibly due to their discomfort or potential alteration of the worker's behaviour. This systematic review has two main objectives: (i) to synthesize and evaluate studies that have employed inertial sensors in ergonomic analysis based on the RULA method; and (ii) to propose an evaluation system for the transparency of this technology to the user as a potential factor that could influence the behaviour and/or movements of the worker. A search was conducted on the Web of Science and Scopus databases. The studies were summarized and categorized based on the type of industry, objective, type and number of sensors used, body parts analysed, combination (or not) with other technologies, real or controlled environment, and transparency. A total of 17 studies were included in this review. The Xsens MVN system was the most widely used in this review, and the majority of studies were classified with a moderate level of transparency. It is noteworthy, however, that there is a limited and worrisome number of studies conducted in uncontrolled real environments.