RESUMO
Hybrid semiconductor-superconductor nanowires have emerged as a cornerstone in modern quantum devices. Integrating such nanowires into hybrid devices typically requires extensive postgrowth processing which may affect device performance unfavorably. Here, we present a technique for in situ shadowing superconductors on nanowires and compare the structural and electronic properties of Al junctions formed by shadowing versus etching. Based on transmission electron microscopy, we find that typical etching procedures lead to atomic-scale surface roughening. This surface perturbation may cause a reduction of the electron mobility as demonstrated in transport measurements. Further, we display advanced shadowing geometries aiding in the pursuit of bringing fabrication of hybrid devices in situ. Finally, we give examples of shadowed junctions exploited in various device geometries that exhibit high-quality quantum transport signatures.
RESUMO
We experimentally and computationally investigate the magneto-conductance across the radial heterojunction of InAs-GaSb core-shell nanowires under a magnetic field, B, up to 30 T and at temperatures in the range 4.2-200 K. The observed double-peak negative differential conductance markedly blue-shifts with increasing B. The doublet accounts for spin-polarized currents through the Zeeman split channels of the InAs (GaSb) conduction (valence) band and exhibits strong anisotropy with respect to B orientation and marked temperature dependence. Envelope function approximation and a semiclassical (WKB) approach allow to compute the magnetic quantum states of InAs and GaSb sections of the nanowire and to estimate the B-dependent tunneling current across the broken-gap interface. Disentangling different magneto-transport channels and a thermally activated valence-to-valence band transport current, we extract the g-factor from the spin-up and spin-down dI/dV branch dispersion, revealing a giant, strongly anisotropic g-factor in excess of 60 (100) for the radial (tilted) field configurations.
RESUMO
We report an experimental study of proximity induced superconductivity in planar Josephson junction devices made from free-standing InAs nanosheets. The nanosheets are grown by molecular beam epitaxy, and the Josephson junction devices are fabricated by directly contacting the nanosheets with superconductor Al electrodes. The fabricated devices are explored by low-temperature carrier transport measurements. The measurements show that the devices exhibit a gate-tunable supercurrent, multiple Andreev reflections, and a good quality superconductor-semiconductor interface. The superconducting characteristics of the Josephson junctions are investigated at different magnetic fields and temperatures and are analyzed based on the Bardeen-Cooper-Schrieffer (BCS) theory. The measurements of the ac Josephson effect are also conducted under microwave radiations with different radiation powers and frequencies, and integer Shapiro steps are observed. Our work demonstrates that InAs nanosheet based hybrid devices are desired systems for investigating the forefront of physics, such as two-dimensional topological superconductivity.
RESUMO
3D integration of III-V semiconductors with Si CMOS is highly attractive since it allows combining new functions such as photonic and analog devices with digital signal processing circuitry. Thus far, most 3D integration approaches have used epitaxial growth on Si, layer transfer by wafer bonding, or die-to-die packaging. Here we present low-temperature integration of InAs on W using Si3N4 template assisted selective area metal-organic vapor-phase epitaxy (MOVPE). Despite growth nucleation on polycrystalline W, we can obtain a high yield of single-crystalline InAs nanowires, as observed by transmission electron microscopy (TEM) and electron backscatter diffraction (EBSD). The nanowires exhibit a mobility of 690 cm2/(V s), a low-resistive, Ohmic electrical contact to the W film, and a resistivity which increases with diameter attributed to increased grain boundary scattering. These results demonstrate the feasibility for single-crystalline III-V back-end-of-line integration with a low thermal budget compatible with Si CMOS.
RESUMO
In-plane InAs nanowires and nanowire networks show great potential to be used as building blocks for electronic, optoelectronic and topological quantum devices, and all these applications are keen to grow the InAs materials directly on Si substrates since it may enable nanowire electronic and quantum devices with seamless integration with Si platform. However, almost all the in-plane InAs nanowires and nanowire networks have been realized on substrates of III-V semiconductors. Here, we demonstrate the selective area epitaxial growth of in-plane InAs nanowires and nanowire networks on Si substrates. We find that the selectivity of InAs growth on Si substrates is mainly dependent on the growth temperature, while the morphology of InAs nanowires is closely related to the V/III flux ratio. We examine the cross-sectional shapes and facets of the InAs nanowires grown along the ã110ã, ã100ã and ã112ã orientations. Thanks to the non-polar characteristics of Si substrates, the InAs nanowires and nanowire networks exhibit superior symmetry compared to that grown on III-V substrates. The InAs nanowires and nanowire networks are zinc-blende (ZB) crystals, but there are many defects in the nanowires, such as stacking faults, twins and grain boundaries. The crystal quality of InAs nanowires and nanowire networks can be improved by increasing the growth temperature within the growth temperature window. Our work demonstrates the feasibility of selective area epitaxial growth of in-plane InAs nanowires and nanowire networks on Si substrates.
RESUMO
Self-assembled quantum dots (QDs) based on III-V semiconductors have excellent properties for applications in quantum optics. However, the presence of a 2D wetting layer (WL) which forms during the Stranski-Krastanov growth of QDs can limit their performance. Here, we investigate WL formation during QD growth by the droplet epitaxy technique. We use a combination of photoluminescence excitation spectroscopy, lifetime measurements, and transmission electron microscopy to identify the presence of an InGaAs WL in these droplet epitaxy QDs, even in the absence of distinguishable WL luminescence. We observe that increasing the amount of Ga deposited on a GaAs (100) surface prior to the growth of InGaAs QDs leads to a significant reduction in the emission wavelength of the WL to the point where it can no longer be distinguished from the GaAs acceptor peak emission in photoluminescence measurements. However increasing the amount of Ga deposited does not suppress the formation of a WL under the growth conditions used here.
Assuntos
Arsenicais , Gálio , Pontos Quânticos , Arsenicais/química , Luminescência , Gálio/químicaRESUMO
InAs nanowires show important potential applications in novel nanoelectronic devices, infrared optoelectronic devices and quantum devices, and all these applications require controllable growth of the InAs nanowires. However, the growth direction of metal-assisted InAs nanowires on Si substrates is often random. Here, we develop a new approach to grow vertically aligned InAs nanowires on Si (111) substrates by molecular-beam epitaxy using Ag as catalysts. The vertically aligned one-dimensional InAs nanowires are grown on the parasitic two-dimensional InAs film on the Si substrates by using the Ag nanoparticles segregated from Ag-In alloy catalysts. The diameters of the vertically aligned InAs nanowires obtained by this method are mainly distributed between 20 and 50 nm. Detailed transmission electron microscope data show that the nanowires with thinner diameters tend to have less stacking faults and twin defects and high crystal quality pure wurtzite nanowires can be obtained. Using these vertically aligned InAs nanowires as the channel material of field effect transistors, we have obtained a field-effect mobility of â¼2800 cm2V-1s-1and anIon/Ioffratio of â¼104at room temperature. Our work provides a new method for the controlled growth of high-quality vertically aligned InAs nanowires on Si substrates.
RESUMO
The nanoscale intrinsic electrical properties of in-plane InAs nanowires grown by selective area epitaxy are investigated using a process-free method involving a multi-probe scanning tunneling microscope. The resistance of oxide-free InAs nanowires grown on an InP(111)Bsubstrate and the resistance of InAs/GaSb core-shell nanowires grown on an InP(001) substrate are measured using a collinear four-point probe arrangement in ultrahigh vacuum. They are compared with the resistance of two-dimensional electron gas reference samples measured using the same method and with the Van der Pauw geometry for validation. A significant improvement of the conductance is achieved when the InAs nanowires are fully embedded in GaSb, exhibiting an intrinsic sheet conductance close to the one of the quantum well counterpart.
RESUMO
Large-area epitaxial growth of III-V nanowires and thin films on van der Waals substrates is key to developing flexible optoelectronic devices. In our study, large-area InAs nanowires and planar structures are grown on hexagonal boron nitride templates using metal organic chemical vapor deposition method without any catalyst or pre-treatments. The effect of basic growth parameters on nanowire yield and thin film morphology is investigated. Under optimised growth conditions, a high nanowire density of 2.1×109cm-2is achieved. A novel growth strategy to achieve uniform InAs thin film on h-BN/SiO2/Si substrate is introduced. The approach involves controlling the growth process to suppress the nucleation and growth of InAs nanowires, while promoting the radial growth of nano-islands formed on the h-BN surface. A uniform polycrystalline InAs thin film is thus obtained over a large area with a dominant zinc-blende phase. The film exhibits near-band-edge emission at room temperature and a relatively high Hall mobility of 399 cm-2/(Vs). This work suggests a promising path for the direct growth of large-area, low-temperature III-V thin films on van der Waals substrates.
RESUMO
Strain control and photoluminescence (PL) enhancement of InAs surface quantum dots (SQDs), exposed to ambient conditions, have been achieved by introducing underlying buried quantum dots (BQDs). The PL wavelength has been tuned from 1270 to as long as 1780 nm, redshifted as the size of the SQDs is reduced. This is in strong contrast to standard QDs, in which blueshift is observed from smaller QDs following basic quantum mechanics. Here, smaller SQDs, both in height and base area, as observed by atomic force microscopy, were obtained with wider GaAs spacer thickness between the SQDs and BQDs. The result strongly suggests that strain and related effects dominate the electronic properties of the SQDs rather than their size, and that a change in the complex strain field occurs through the spacer. The underlying BQDs also serve as effective carrier reservoirs. A PL intensity enhancement of 17 fold was observed as the GaAs spacer thickness was reduced from 150 to 10 nm. A large portion of the photoexcited carriers is initially captured and stored in the BQDs. When sufficient carriers are transferred to fill non-radiative surface states, the excess may be transferred to the SQDs enhancing the luminescence.
RESUMO
We investigated metal-organic vapor phase epitaxy grown droplet epitaxy (DE) and Stranski-Krastanov (SK) InAs/InP quantum dots (QDs) by cross-sectional scanning tunneling microscopy (X-STM). We present an atomic-scale comparison of structural characteristics of QDs grown by both growth methods proving that the DE yields more uniform and shape-symmetric QDs. Both DE and SKQDs are found to be truncated pyramid-shaped with a large and sharp top facet. We report the formation of localized etch pits for the first time in InAs/InP DEQDs with atomic resolution. We discuss the droplet etching mechanism in detail to understand the formation of etch pits underneath the DEQDs. A summary of the effect of etch pit size and position on fine structure splitting (FSS) is provided via thek·ptheory. Finite element (FE) simulations are performed to fit the experimental outward relaxation and lattice constant profiles of the cleaved QDs. The composition of QDs is estimated to be pure InAs obtained by combining both FE simulations and X-STM results. The preferential formation of {136} and {122} side facets was observed for the DEQDs. The formation of a DE wetting layer from As-P surface exchange is compared with the standard SKQDs wetting layer. The detailed structural characterization performed in this work provides valuable feedback for further growth optimization to obtain QDs with even lower FSS for applications in quantum technology.
RESUMO
Integrating self-catalyzed InAs nanowires on Si(111) is an important step toward building vertical gate-all-around transistors. The complementary metal oxide semiconductor (CMOS) compatibility and the nanowire aspect ratio are two crucial parameters to consider. In this work, we optimize the InAs nanowire morphology by changing the growth mode from Vapor-Solid to Vapor-Liquid-Solid in a CMOS compatible process. We study the key role of the Hydrogen surface preparation on nanowire growths and bound it to a change of the chemical potential and adatoms diffusion length on the substrate. We transfer the optimized process to patterned wafers and adapt both the surface preparation and the growth conditions. Once group III and V fluxes are balances, aspect ratio can be improved by increasing the system kinetics. Overall, we propose a method for large scale integration of CMOS compatible InAs nanowire on silicon and highlight the major role of kinetics on the growth mechanism.
RESUMO
Indium arsenide quantum dots, which typically emit in the near-infrared, have been utilized in various optoelectronics and biomedical applications, such as covert illumination, optical communication, and deep-tissue imaging. While theory predicts that further quantum confinement through size reduction could enable visible light emission, systems with larger optical bandgaps have not been realized. Here, we report a method of preparing highly luminescent, visible-light-emitting In(Zn)As/ZnSe/ZnS QD, using a low-temperature nanocluster synthesis approach. Each QD contains an ultraconfined In(Zn)As nanocluster and fluoresces at tunable wavelengths between 538 and 640 nm with a high photoluminescence quantum efficiency of 58%. We confirm, through DFT and spectroscopic analysis, that the strong confinement effects in the few-atom-wide In(Zn)As nanoclusters are responsible for the significant spectral shift from the near-infrared to the visible region. These findings suggest that broader-than-expected optical tuning may now be achievable in other quantum-confined semiconductor systems, which could lead to a wider scope of functional applications in optoelectronics.
Assuntos
Arsenicais , Pontos Quânticos , Índio , LuminescênciaRESUMO
The cross-sectional dimensions of nanowires set the quantization conditions for the electronic subbands they host. These can be used as a platform to realize one-dimesional topological superconductivity. Here we develop a protocol that forces such nanowires to kink and change their growth direction. Consequently, a thin rectangular nanoplate is formed, which gradually converges into a very thin square tip. We characterize the resulting tapered nanowires structurally and spectroscopically by scanning and transmission electron microscopy and scanning tunneling microscopy and spectroscopy and model their growth. A unique structure composed of ordered rows of atoms on the (110) facet of the nanoflag is further revealed by atomically resolved topography and modeled by simulations. We discuss possible advantages tapered InAs nanowires offer for Majorana zero-mode realization and manipulation.
RESUMO
Hot carrier harvest could save 30% energy loss in solar cells. So far, however, it is still unreachable as the photoexcited hot carriers are short-lived, â¼1 ps, determined by a rapid relaxation process, thus invalidating any reprocessing efforts. Here, we propose and demonstrate a feasible route to reserve hot electrons for efficient collection. It is accomplished by an intentional mix of cubic zinc-blend and hexagonal wurtzite phases in III-V semiconductor nanowires. Additional energy levels are then generated above the conduction band minimum, capturing and storing hot electrons before they cool down to the band edges. We also show the superiority of core/shell nanowire (radial heterostructure) in extracting hot electrons. The strategy disclosed here may offer a unique opportunity to modulate hot carriers for efficient solar energy harvest.
RESUMO
Integration of high-quality semiconductor-superconductor devices into scalable and complementary metal-oxide-semiconductor compatible architectures remains an outstanding challenge, currently hindering their practical implementation. Here, we demonstrate growth of InAs nanowires monolithically integrated on Si inside lateral cavities containing superconducting TiN elements. This technique allows growth of hybrid devices characterized by sharp semiconductor-superconductor interfaces and with alignment along arbitrary crystallographic directions. Electrical characterization at low temperature reveals proximity induced superconductivity in InAs via a transparent interface.
RESUMO
The development of powerful terahertz (THz) emitters is the cornerstone for future THz applications, such as communication, medical biology, non-destructive inspection, and scientific research. Here, we report the THz emission properties and mechanisms of mushroom-shaped InAs nanowire (NW) network using linearly polarized laser excitation. By investigating the dependence of THz signal to the incidence pump light properties (e.g. incident angle, direction, fluence, and polarization angle), we conclude that the THz wave emission from the InAs NW network is induced by the combination of linear and nonlinear optical effects. The former is a transient photocurrent accelerated by the photo-Dember field, while the latter is related to the resonant optical rectification effect. Moreover, thep-polarized THz wave emission component is governed by the linear optical effect with a proportion of â¼85% and the nonlinear optical effect of â¼15%. In comparison, thes-polarized THz wave emission component is mainly decided by the nonlinear optical effect. The THz emission is speculated to be enhanced by the localized surface plasmon resonance absorption of the In droplets on top of the NWs. This work verifies the nonlinear optical mechanism in the THz generation of semiconductor NWs and provides an enlightening reference for the structural design of powerful and flexible THz surface and interface emitters in transmission geometry.
RESUMO
Charge transport physics in InAs/GaSb bi-layer systems has recently attracted attention for the experimental search for two-dimensional topological superconducting states in solids. Here we report measurement of charge transport spectra of nano devices consisting of an InAs/GaSb quantum well sandwiched by tantalum superconductors. We explore the current-voltage relation as a function of the charge-carrier density in the quantum well controlled by a gate voltage and an external magnetic field. We observe three types of differential resistance peaks, all of which can be effectively tuned by the external magnetic field, and, however, two of which appear at electric currents independent of the gate voltage, indicating a dominant mechanism from the superconductor and the system geometry. By analyzing the spectroscopic features, we find that the three types of peaks identify Andreev reflections, quasi-particle interference, and superconducting transitions in the device, respectively. Our results provide a basis for further exploration of possible topological superconducting state in the InAs/GaSb system.
RESUMO
Thermoelectric measurements have the potential to uncover the density of states (DOSs) of low-dimensional materials. Here, we present the anomalous thermoelectric behavior of monolayer graphene-nanowire (NW) heterostructures, showing large oscillations as a function of the doping concentration. Our devices consist of InAs NW and graphene vertical heterostructures, which are electrically isolated by thin (â¼10 nm) hexagonal boron nitride (hBN) layers. In contrast to conventional thermoelectric measurements, where a heater is placed on one side of a sample, we use the InAs NW (diameter â¼50 nm) as a local heater placed in the middle of the graphene channel. We measure the thermoelectric voltage induced in graphene due to Joule heating in the NW as a function of temperature (1.5-50 K) and carrier concentration. The thermoelectric voltage in bilayer graphene (BLG)-NW heterostructures shows sign change around the Dirac point, as predicted by Mott's formula. In contrast, the thermoelectric voltage measured across monolayer graphene (MLG)-NW heterostructures shows anomalous large-amplitude oscillations around the Dirac point, not seen in the Mott response derived from the electrical conductivity measured on the same device. The anomalous oscillations are a signature of the modified DOSs in MLG by the electrostatic potential of the NW, which is much weaker in the NW-BLG devices. Thermal calculations of the heterostructure stack show that the temperature gradient is dominant in the graphene region underneath the NW, and thus sensitive to the modified DOSs resulting in anomalous oscillations in the thermoelectric voltage. Furthermore, with the application of a magnetic field, we detect modifications in the DOSs due to the formation of Landau levels in both MLG and BLG.
RESUMO
Understanding the dynamic thermal behavior of nanomaterials based on their unique physical and chemical properties is critical for their applications. In this study, the thermal behavior of single-crystalline InAs nanowires in an amorphous Al2O3shell was investigated by conductingin situheating experiments in a transmission electron microscope. Two different thermodynamic patterns were observed during thein situheating experiments: (1) continuous vaporization and condensation simultaneously at temperatures lower than 838.15 K, and (2) pure evaporation at temperatures higher than 878.15 K. During the simultaneous condensation and vaporization in closer areas in a single InAs nanowire, the front edge of the vaporization was flat, while that of the condensation actively changed with time and temperature. Pure vaporization was conducted via layer-by-layer evaporation followed by three-dimensional vaporization at the final stage. The thermal behaviors of the InAs nanowires were demonstrated from a thermodynamic point of view.