Water-assisted strong underwater adhesion via interfacial water removal and self-adaptive gelation.

In nearly all cases of underwater adhesion, water molecules typically act as a destroyer. Thus, removing interfacial water from the substrate surfaces is essential for forming super-strong underwater adhesion. However, current methods mainly rely on physical means to dislodge interfacial water, such as absorption, hydrophobic repulsion, or extrusion, which are inefficient in removing obstinate hydrated water at contact interface, resulting in poor adhesion. Herein, we present a unique means of reversing the role of water to assist in realizing a self-strengthening liquid underwater adhesive (SLU-adhesive) that can effectively remove water at contact interface. This is achieved through multiscale physical-chemical coupling methods across millimeter to molecular levels and self-adaptive strengthening of the cohesion during underwater operations. As a result, strong adhesion over 1,600 kPa (compared to ~100 to 1,000 kPa in current state of the art) can be achieved on various materials, including inorganic metal and organic plastic materials, without preloading in different environments such as pure water, a wide range of pH solutions (pH = 3 to 11), and seawater. Intriguingly, SLU-adhesive/photothermal nanoparticles (carbon nanotubes) hybrid materials can significantly reduce the time required for complete curing from 24 h to 40 min using near-infrared laser radiation due to unique thermal-response of the chemical reaction rate. The excellent adhesion property and self-adaptive adhesion procedure allow SLU-adhesive materials to demonstrate great potential for broad applications in underwater sand stabilization, underwater repair, and even adhesion failure detection as a self-reporting adhesive. This concept of "water helper" has potential to advance underwater adhesion and manufacturing strategies.

Double-layer structure of the Pt(111)-aqueous electrolyte interface.

We present detailed measurements of the double-layer capacitance of the Pt(111)-electrolyte interface close to the potential of zero charge (PZC) in the presence of several different electrolytes consisting of anions and cations that are considered to be nonspecifically adsorbed. For low electrolyte concentrations, we show strong deviations from traditional Gouy-Chapman-Stern (GCS) behavior that appear to be independent of the nature of the electrolyte ions. Focusing on the capacitance further away from PZC and the trends for increasing ion concentration, we observe ion-specific capacitance effects that appear to be related to the size or hydration strength of the ions. We formulate a model for the structure of the electric double layer of the Pt(111)-electrolyte interface that goes significantly beyond the GCS theory. By combining two existing models, namely, one capturing the water reorganization on Pt close to the PZC and one accounting for an attractive ion-surface interaction not included in the GCS model, we can reproduce and interpret the main features the experimental capacitance of the Pt(111)-electrolyte interface. The model suggests a picture of the double layer with an increased ion concentration close to the interface as a consequence of a weak attractive ion-surface interaction, and a changing polarizability of the Pt(111)-water interface due to the potential-dependent water adsorption and orientation.

The dielectric function profile across the water interface through surface-specific vibrational spectroscopy and simulations.

The dielectric properties of interfacial water on subnanometer length scales govern chemical reactions, carrier transfer, and ion transport at interfaces. Yet, the nature of the interfacial dielectric function has remained under debate as it is challenging to access the interfacial dielectric with subnanometer resolution. Here we use the vibrational response of interfacial water molecules probed using surface-specific sum-frequency generation (SFG) spectra to obtain exquisite depth resolution. Different responses originate from water molecules at different depths and report back on the local interfacial dielectric environment via their spectral amplitudes. From experimental and simulated SFG spectra at the air/water interface, we find that the interfacial dielectric constant changes drastically across an ∼1 Šthin interfacial water region. The strong gradient of the interfacial dielectric constant leads, at charged planar interfaces, to the formation of an electric triple layer that goes beyond the standard double-layer model.

Copper-Nanoparticle-Decorated Hydrothermal Carbonaceous Carbon-Polydimethylsiloxane Nanocomposites: Unveiling Potential in Simultaneous Light-Driven Interfacial Water Evaporation and Power Generation.

This study introduces a hydrothermal synthesis method that uses glucose and Cu2+ ions to create a Cu-nanoparticle (NP)-decorated hydrothermal carbonaceous carbon hybrid material (Cu-HTCC). Glucose serves both as a reducing agent, efficiently transforming Cu2+ ions into elemental Cu nanostructures, and as a precursor for HTCC microstructures. An enhanced plasmon-induced electric field resulting from Cu NPs supported on microstructure matrices, coupled with a distinctive localized π-electronic configuration in the hybrid material, as confirmed by X-ray photoelectron spectroscopic analysis, lead to the heightened optical absorption in the visible-near-infrared range. Consequently, flexible nanocomposites of Cu-HTCC/PDMS and Cu-HTCC@PDMS (PDMS = polydimethylsiloxane) are designed as 2 and 3D structures, respectively, that exhibit broad-spectrum solar absorption. These composites promise efficient photo-assisted thermoelectric power generation and water evaporation, demonstrating commendable mechanical stability and flexibility. Notably, the Cu-HTCC@PDMS composite sponge simultaneously exhibits commendable efficiency in both water evaporation (1.47 kg m-2 h-1) and power generation (32.1 mV) under 1 sunlight illumination. These findings unveil new possibilities for innovative photothermal functional materials in diverse solar-driven applications.

Bioinspired Photothermal Metal-Organic Framework Cocrystal with Ultra-Fast Water Transporting Channels for Solar-Driven Interfacial Water Evaporation.

Herein, a bioinspired metal-organic framework (MOF) cocrystal produced from the co-assembly of a MOF [Ni3(hexaiminobenzene)2, Ni3(HIB)2] and p-chloranils (CHLs) is reported. Because of the 2D conjugation nature and the formation of persistent anion radicals, this cocrystal shows an excellent photothermal property, and is further used as an absorber in solar-driven interfacial water evaporation. The solar-driven interfacial water evaporation rate (4.04 kg m-2 h-1) is among the best compared with those of previously reported photothermal materials. Molecular dynamics simulation results suggested that the rotating of the CHL molecules relative to the MOF planes tuned the pore size to enable the ultra-fast water transporting, and thus ultra-high water transporting rates (1.11 × 1011 and 3.21 × 1011 H2O s-1 channel-1 at 298.2 and 323.0 K, respectively) for layered cocrystal structures, that are much higher than that of aquaporins (≈1.1 × 1010 H2O s-1 channel-1 at 298.2 K), are observed. The superior solar-driven water evaporation performance is thus attributed to the synergistic effect of the ultra-fast water transporting pores together with the excellent photothermal property of the cocrystal. This research provided a biomimetic strategy of rational design and production of charge transfer cocrystals to modulate their pores and photothermal properties for solar-driven interfacial water evaporation.

Iridium-Based Alkaline Hydrogen Oxidation Reaction Electrocatalysts.

The hydroxide exchange membrane fuel cells (HEMFCs) are promising but lack of high-performance anode hydrogen oxidation reaction (HOR) electrocatalysts. The platinum group metals (PGMs) have the HOR activity in alkaline medium two to three orders of magnitude lower than those in acid, leading to the high required PGMs amount on anode to achieve high HEMFC performance. The mechanism study demonstrates the hydrogen binding energy of the catalyst determines the alkaline HOR kinetics, and the adsorbed OH and water on the catalyst surface promotes HOR. Iridium (Ir) has a unique advantage for alkaline HOR due to its similar hydrogen binding energy to Pt and enhanced adsorption of OH. However, the HOR activity of Ir/C is still unsatisfied in practical HEMFC applications. Further fine tuning the adsorption of the intermediate on Ir-based catalysts is of great significance to improve their alkaline HOR activity, which can be reasonably realized by structure design and composition regulation. In this concept, we address the current understanding about the alkaline HOR mechanism and summarize recent advances of Ir-based electrocatalysts with enhanced alkaline HOR activity. We also discuss the perspectives and challenges on Ir-based electrocatalysts in the future.

Heterodyne-Detected Sum-Frequency Generation Vibrational Spectroscopy Reveals Aqueous Molecular Structure at the Suspended Graphene/Water Interface.

Graphene, a transparent two-dimensional conductive material, has brought extensive new perspectives and prospects to various aqueous technological systems, such as desalination membranes, chemical sensors, energy storage, and energy conversion devices. Yet, the molecular-level details of graphene in contact with aqueous electrolytes, such as water orientation and hydrogen bond structure, remain elusive or controversial. Here, we employ surface-specific heterodyne-detected sum-frequency generation (HD-SFG) vibrational spectroscopy to re-examine the water molecular structure at a freely suspended graphene/water interface. We compare the response from the air/graphene/water system to that from the air/water interface. Our results indicate that the χ y y z 2 ${{\chi }_{yyz}^{\left(2\right)}}$ spectrum recorded from the air/graphene/water system arises from the topmost 1-2 water layers in contact with the graphene, with the graphene itself not generating a significant SFG response. Compared to the air/water interface response, the presence of monolayer graphene weakly affects the interfacial water. Graphene weakly affects the dangling O-H group, lowering its frequency through its interaction with the graphene sheet, and has a very small effect on the hydrogen-bonded O-H group. Molecular dynamics simulations confirm our experimental observation. Our work provides molecular insight into the interfacial structure at a suspended graphene/water interface, relevant to various technological applications of graphene.

Cobalt-based Co3Mo3N/Co4N/Co Metallic Heterostructure as a Highly Active Electrocatalyst for Alkaline Overall Water Splitting.

Alkaline water electrolysis holds promise for large-scale hydrogen production, yet it encounters challenges like high voltage and limited stability at higher current densities, primarily due to inefficient electron transport kinetics. Herein, a novel cobalt-based metallic heterostructure (Co3Mo3N/Co4N/Co) is designed for excellent water electrolysis. In operando Raman experiments reveal that the formation of the Co3Mo3N/Co4N heterointerface boosts the free water adsorption and dissociation, increasing the available protons for subsequent hydrogen production. Furthermore, the altered electronic structure of the Co3Mo3N/Co4N heterointerface optimizes ΔGH of the nitrogen atoms at the interface. This synergistic effect between interfacial nitrogen atoms and metal phase cobalt creates highly efficient active sites for the hydrogen evolution reaction (HER), thereby enhancing the overall HER performance. Additionally, the heterostructure exhibits a rapid OH- adsorption rate, coupled with great adsorption strength, leading to improved oxygen evolution reaction (OER) performance. Crucially, the metallic heterojunction accelerates electron transport, expediting the afore-mentioned reaction steps and enhancing water splitting efficiency. The Co3Mo3N/Co4N/Co electrocatalyst in the water electrolyzer delivers excellent performance, with a low 1.58 V cell voltage at 10 mA cm-2, and maintains 100 % retention over 100 hours at 200 mA cm-2, surpassing the Pt/C||RuO2 electrolyzer.

Unveiling the Structure and Dissociation of Interfacial Water on RuO2 for Efficient Acidic Oxygen Evolution Reaction.

Understanding the structure and dynamic process of interfacial water molecules at the catalyst-electrolyte interface on acidic oxygen evolution reaction (OER) kinetics is highly desirable for the development of proton exchange membrane water electrolyzers. Herein, we construct a series of p-block metallic elements (Ga, In, Sn) doped RuO2 catalysts with manipulated electronic structure and Ru-O covalency to investigate the effect of electrochemical interfacial engineering on the improvement of acidic OER activity. Associated with operando attenuated total reflectance surface-enhanced infrared absorption spectroscopy measurements and theoretical analysis, we uncover the free-H2O enriched local environment and dynamic evolution from 4-coordinated hydrogen-bonded water and 2-coordinated hydrogen-bonded water to free-H2O on the surface of Ga-RuO2, are responsible for the optimized connectivity of hydrogen bonding network in the electrical double layer by promoting solvent reorganization. In addition, the structurally ordered interfacial water molecules facilitate high-efficiency proton-coupled electron transfer across the interface, leading to reduced energy barrier of the follow-up dissociation process and enhanced acidic OER performance. This work highlights the key role of structure and dynamic process of interfacial water for acidic OER, and demonstrates the electrochemical interfacial engineering as an efficient strategy to design high-performance electrocatalysts.

The Role of Phosphorus on Alkaline Hydrogen Oxidation Electrocatalysis for Ruthenium Phosphides.

Transition metal/p-block compounds are regarded as the most essential materials for electrochemical energy converting systems involving various electrocatalysis. Understanding the role of p-block element on the interaction of key intermediates and interfacial water molecule orientation at the polarized catalyst-electrolyte interface during the electrocatalysis is important for rational designing advanced p-block modified metal electrocatalysts. Herein, taking a sequence of ruthenium phosphides (including Ru2P, RuP and RuP2) as model catalysts, we establish a volcanic-relation between P-proportion and alkaline hydrogen oxidation reaction (HOR) activity. The dominant role of P for regulating hydroxyl binding energy is validated by active sites poisoning experiments, pH-dependent infection-point behavior, in situ surface enhanced infrared absorption spectroscopy, and density functional theory calculations, in which P could tailor the d-band structure of Ru, optimize the hydroxyl adsorption sites across the Ru-P moieties, thereby leading to improved proportion of strongly hydrogen-bonded water and facilitated proton-coupled electron transfer process, which are responsible for the enhanced alkaline HOR performance.

The Role of Interfacial Water in CO2 Electrolysis over Ni-N-C Catalyst in a Membrane Electrode Assembly Electrolyzer.

CO2 electrolysis is a promising route for achieving net-zero emission through decarbonization. To realize CO2 electrolysis toward practical application, beyond catalyst structures, it is also critical to rationally manipulate catalyst microenvironments such as the water at the electrode/electrolyte interface. Here, the role of interfacial water in CO2 electrolysis over Ni-N-C catalyst modified with different polymers is investigated. Benefiting from a hydrophilic electrode/electrolyte interface, the Ni-N-C catalyst modified with quaternary ammonia poly(N-methyl-piperidine-co-p-terphenyl) shows a Faradaic efficiency of 95% and a partial current density of 665 mA cm-2 for CO production in an alkaline membrane electrode assembly electrolyzer. A scale-up demonstration using a 100 cm2 electrolyzer achieves a CO production rate of 514 mL min-1 at a current of 80 A. In-situ microscopy and spectroscopy measurements indicate that the hydrophilic interface significantly promotes the formation of the *COOH intermediate, rationalizing the high CO2 electrolysis performance.

Effects of Charged Surfactants on Interfacial Water Structure and Macroscopic Properties of the Air-Water Interface.

Surfactants are used to control the macroscopic properties of the air-water interface. However, the link between the surfactant molecular structure and the macroscopic properties remains unclear. Using sum-frequency generation spectroscopy and molecular dynamics simulations, two ionic surfactants (dodecyl trimethylammonium bromide, DTAB, and sodium dodecyl sulphate, SDS) with the same carbon chain lengths and charge magnitude (but different signs) of head groups interact and reorient interfacial water molecules differently. DTAB forms a thicker but sparser interfacial layer than SDS. It is due to the deep penetration into the adsorption zone of Br- counterions compared to smaller Na+ ones, and also due to the flip-flop orientation of water molecules. SDS alters two distinctive interfacial water layers into a layer where H+ points to the air, forming strong hydrogen bonding with the sulphate headgroup. In contrast, only weaker dipole-dipole interactions with the DTAB headgroup are formed as they reorient water molecules with H+ point down to the aqueous phase. Hence, with more molecules adsorbed at the interface, SDS builds up a higher interfacial pressure than DTAB, producing lower surface tension and higher foam stability at a similar bulk concentration. Our findings offer improved knowledge for understanding various processes in the industry and nature.

Structural water molecules dominated p band intermediate states as a unified model for the origin on the photoluminescence emission of noble metal nanoclusters: from monolayer protected clusters to cage confined nanoclusters.

In the past several decades, noble metal nanoclusters (NMNCs) have been developed as an emerging class of luminescent materials due to their superior photo-stability and biocompatibility, but their luminous quantum yield is relatively low and the physical origin of the bright photoluminescence (PL) of NMNCs remain elusive, which limited their practical application. As the well-defined structure and composition of NMNCs have been determined, in this mini-review, the effect of each component (metal core, ligand shell and interfacial water) on their PL properties and corresponded working mechanism were comprehensively introduced, and a model that structural water molecules dominated p band intermediate state was proposed to give a unified understanding on the PL mechanism of NMNCs and a further perspective to the future developments of NMNCs by revisiting the development of our studies on the PL mechanism of NMNCs in the past decade.

Role of Interfacial Water in the Tribological Behavior of Graphene in an Electric Field.

Friction properties in the electric field are important for the application of graphene as a solid lubricant in graphene-based micro/nanoelectromechanical systems. The studies based on conductive atomic force microscopy show that interfacial water between graphene and the SiO2/Si substrate affects the friction of graphene in the electric field. Friction without applying voltage remains low because the interfacial water retains a stable ice-like network. However, friction after applying voltage increases because the polar water molecules are attracted by the electric field and gather around the tip. The gathered interfacial water not only increases the deformation of graphene but is also pushed by the tip during frictional sliding, which results in the increased friction. These studies provide beneficial guidelines for the applications of graphene as a solid lubricant in the electric field.

Interfacial-Water-Modulated Photoluminescence of Single-Layer WS2 on Mica.

Because of their bandgap tunability and strong light-matter interactions, two-dimensional (2D) semiconductors are considered promising candidates for next-generation optoelectronic devices. However, their photophysical properties are greatly affected by their surrounding environment because of their 2D nature. In this work, we report that the photoluminescence (PL) of single-layer WS2 is substantially affected by interfacial water that is inevitably present between it and the supporting mica substrates. Using PL spectroscopy and wide-field imaging, we show that the emission signals from A excitons and their negative trions decreased at distinctively different rates with increasing excitation power, which could be attributed to the more efficient annihilation between excitons than between trions. By gas-controlled PL imaging, we also prove that the interfacial water converted the trions into excitons by depleting native negative charges through an oxygen reduction reaction, which rendered the excited WS2 more susceptible to nonradiative decay via exciton-exciton annihilation. Understanding the role of nanoscopic water in complex low-dimensional materials will eventually contribute to devising their novel functions and related devices.

Direct Probe of Electrochemical Pseudocapacitive pH Jump at a Graphene Electrode.

Molecular-level insight into interfacial water at a buried electrode interface is essential in electrochemistry, but spectroscopic probing of the interface remains challenging. Here, using surface-specific heterodyne-detected sum-frequency generation (HD-SFG) spectroscopy, we directly access the interfacial water in contact with the graphene electrode supported on calcium fluoride (CaF2 ). We find phase transition-like variations of the HD-SFG spectra vs. applied potentials, which arises not from the charging/discharging of graphene but from the charging/discharging of the CaF2 substrate through the pseudocapacitive process. The potential-dependent spectra are nearly identical to the pH-dependent spectra, evidencing that the pseudocapacitive behavior is associated with a substantial local pH change induced by water dissociation between the CaF2 and graphene. Our work evidences the local molecular-level effects of pseudocapacitive charging at an electrode/aqueous electrolyte interface.

Interfacial Water Tuning by Intermolecular Spacing for Stable CO2 Electroreduction to C2+ Products.

Electroreduction of CO2 to multi-carbon (C2+ ) products is a promising approach for utilization of renewable energy, in which the interfacial water quantity is critical for both the C2+ product selectivity and the stability of Cu-based electrocatalytic sites. Functionalization of long-chain alkyl molecules on a catalyst surface can help to increase its stability, while it also tends to block the transport of water, thus inhibiting the C2+ product formation. Herein, we demonstrate the fine tuning of interfacial water by surface assembly of toluene on Cu nanosheets, allowing for sustained and enriched CO2 supply but retarded water transfer to catalytic surface. Compared to bare Cu with fast cathodic corrosion and long-chain alkyl-modified Cu with main CO product, the toluene assembly on Cu nanosheet surface enabled a high Faradaic efficiency of 78 % for C2+ and a partial current density of 1.81 A cm-2 . The toluene-modified Cu catalyst further exhibited highly stable CO2 -to-C2 H4 conversion of 400 h in a membrane-electrode-assembly electrolyzer, suggesting the attractive feature for both efficient C2+ selectivity and excellent stability.

Atomically Local Electric Field Induced Interface Water Reorientation for Alkaline Hydrogen Evolution Reaction.

The slow water dissociation process in alkaline electrolyte severely limits the kinetics of HER. The orientation of H2 O is well known to affect the dissociation process, but H2 O orientation is hard to control because of its random distribution. Herein, an atomically asymmetric local electric field was designed by IrRu dizygotic single-atom sites (IrRu DSACs) to tune the H2 O adsorption configuration and orientation, thus optimizing its dissociation process. The electric field intensity of IrRu DSACs is over 4.00×1010  N/C. The ab initio molecular dynamics simulations combined with in situ Raman spectroscopy analysis on the adsorption behavior of H2 O show that the M-H bond length (M=active site) is shortened at the interface due to the strong local electric field gradient and the optimized water orientation promotes the dissociation process of interfacial water. This work provides a new way to explore the role of single atomic sites in alkaline hydrogen evolution reaction.

Bifunctional Near-Neutral Electrolyte Enhances Oxygen Evolution Reaction.

Performance of electrocatalytic reactions depends on not only the composition and structure of the active sites, but also their local environment, including the surrounding electrolyte. In this work, we demonstrate that BF2 (OH)2 - anion is the key fluoroborate species formed in the mixed KBi/KF (KBi=potassium borate) electrolyte to enhance the rate of the oxygen evolution reaction (OER) at near-neutral pH. Through a combination of electrokinetic and in situ spectroscopic studies, we show that the mixed KBi/KF electrolyte promotes the OER via two pathways: 1) stabilizing the interfacial pH during the proton-producing reaction with its high buffering capacity; and 2) activating the interfacial water via strong hydrogen bonds with F-containing species. With the KBi/KF electrolyte, electrodeposited Co(OH)2 is able to achieve 100 mA/cm2 at 1.74 V, which is among the highest reported activities with earth-abundant electrocatalysts at near neutral conditions. These findings highlight the potential of leveraging electrolyte-engineering for improving the electrochemical performance of the OER.

Self-Regulating Solar Steam Generators Enable Volatile Organic Compound Removal through In Situ H2O2 Generation.

Interfacial solar steam generation for clean water production suffers from volatile organic compound (VOC) contamination during solar-to-steam conversion. Here, we present a solar steam generator based on the integration of melamine foam (MF), polydopamine (PDA), and Ag/AgCl particles. Together with the high photothermal conversion efficiency (ca. 87.8%, 1 kW/m2) achieved by the PDA thin film, the Ag/AgCl particles can efficiently activate the localized generation of H2O2 and •OH in situ, thus degrading the VOCs during the rapid vapor generation. The generation of H2O2 and •OH in situ also facilitates the creation of a buffer zone containing H2O2 and •OH for the rapid removal of organic pollutants in the surrounding water attracted to the solar vapor generator, demonstrating a self-cleaning steam generator toward various volatile compounds such as phenol, aniline, 2,4-dichlorophenol, and N,N-dimethylformamide in a wide range of concentrations.