RESUMO
Following the discovery of hominin fossils at Trinil (Java, Indonesia) in 1891 and 1892, Eugène Dubois named a new species, now known as Homo erectus. Although the main historical events are well-known, there appears to be no consensus regarding two important aspects of the naming of the species, including what constitutes the original publication of the name, and what is the name-bearing type specimen. These issues are addressed in this paper with reference to original sources and the International Code of Zoological Nomenclature. Our review confirms earlier studies that cite the published quarterly fieldwork report covering the 3rd quarter of 1892 as the original publication naming the species erectus. However, until recently, the correct publication year of 1893 has consistently been cited as 1892, and it has rarely been recognized that the author of the publication was anonymous, even though the author of the species is specifically named. Importantly, Dubois assigns all three hominin fossils found at Trinil up to that moment to the new species, explicitly stating that they belong to a single individual. The three fossils, a molar, a calotte, and a femur, therefore jointly constitute the original holotype. However, the femur most likely derives from younger strata than the other hominins and shows fully modern human-like morphology, unlike subsequently discovered H. erectus femora. Moreover, there is no consensus over the affinities of the molar, and if it is H. erectus rather than an extinct ape, there is no evidence that it belongs to the same individual as the calotte. Excluding these two fossils from the holotype, the calotte is the appropriate fossil to retain the role as name-bearing specimen.
Assuntos
Hominidae , Animais , Humanos , Hominidae/anatomia & histologia , Fósseis , Fêmur/anatomia & histologia , Extremidade Inferior/anatomia & histologia , IndonésiaRESUMO
The microbiome is an important consideration for the conservation of endangered species. Studies provided evidence of the effect of behavior and habitat change on the microbiota of wild animals and reported various inferences. It indicates the complexity of factors influencing microbiota diversity, including incomplete sampling procedures. Data abnormality may arise due to the procedures warranting preliminary analysis, such as rarefaction, before downstream analysis. This present study demonstrated the effect of data rarefaction and aggregation on the comparison of wild rusa deer's gut microbial diversity. Eighty-five feces samples were collected from 11 deer populations inhabiting three national parks in Java and Bali islands. Using the Illumina Nova-Seq platform, fragments of 16s rRNA gene were sequenced, and raw data of 51,389 reads corresponding to 2 domains, 22 phyla, 45 classes, 83 orders, 182 families, and 460 genera of bacteria were obtained. Data rarefaction was applied at two different library sizes (minimum and fixed) and aggregation (11 populations into 3 research sites) to investigate its effect on the microbial diversity comparison. There are significant differences in alpha diversity between populations, but not research sites, at all library sizes of rarefaction. A similar finding is also found in beta diversity. Moreover, data rarefaction and aggregation result in different values of the diversity metrics. This present study shows that statistical analysis remains a substantial concern in microbiome studies applied to conservation biology. It suggests reporting a more detailed data normalization in microbiome studies as an inherent control of suboptimal sampling, particularly when involving feces.
RESUMO
BACKGROUND: This study investigates the impact of low food diversity on the health status of children using the Dietary Diversity Score (DDS) and Dietary Serving Score (DSS) in a sub-district with the highest percentage of poor households. The economic burden of low food diversity was observed by analysing the cost of illness in the children with low food diversity. METHODS: Data from 329 children were collected. We determined the impact of DDS and DSS and other factors on the health status of children aged 2-14 years, using a probit model. The cost of illness (e.g., typhus, stomach ulcers, coughs, flu, and fever) due to low food diversity was calculated from medical registration fees, medical action costs, transportation costs, and other costs. RESULTS: The results shows that a 1% point increase in DDS or DSS potentially decreases children's health complaints by 10% and 8%, respectively. Given the current 26% prevalence of health complaints among children with low DDS, the annual economic burden reaches US$75.72 per child per household. In addition, the current 41% prevalence of children with low DDS resulted in an annual cost to the government of US$153.45 per child. CONCLUSIONS: The effect of inadequate dietary diversity on children's health is potentially high and contributes to the economic burden on households and the government.
Assuntos
Saúde da Criança , Efeitos Psicossociais da Doença , Humanos , Criança , Pré-Escolar , Adolescente , Feminino , Masculino , Saúde da Criança/economia , Dieta/economia , Dieta/estatística & dados numéricos , Nível de SaúdeRESUMO
BACKGROUND: Java tea is widely consumed and has multiple health effects. This study established a steam explosion (SE) pretreatment method to prepare Java tea-leaf powders. The physicochemical, functional properties, phenolic extraction, and antioxidant activity of Java tea-leaf powders produced by simple and SE-assisted milling methods were investigated. RESULTS: In comparison with simple milling, SE pretreatment broke the cell wall effectively and reduced the particle size of Java tea-leaf powders. Steam explosion-treated powders showed higher values for sensory signals, bulk and tap density, and for the water solubility index. After SE treatment, the adsorption capacities to glucose, soybean oil, and cholesterol of leaf powders were increased by up to 55, 95, and 80% respectively. The extracts from SE-treated powders also showed higher total polyphenol content and antioxidant activity. CONCLUSION: Steam explosion treatment is helpful for the improvement of functional properties and antioxidant activity, which can benefit the development and application of Java tea-leaf powders. © 2024 Society of Chemical Industry.
RESUMO
This research aims to understand the extent of microplastic contamination in Pekalongan waters, Central Java, and its potential impact on fishing grounds, aligning with Indonesia's National Action Plan for Handling Marine Debris 2018-2025. The study employs a 2D hydrodynamics modelling approach with Mike 21 Software to map the spatial distribution of microplastic movement concerning fishing areas during the west and east monsoon seasons. The results showed that microplastic particles follow tidal currents in Pekalongan waters, with their movement influenced by factors such as current, wind, and tidal conditions. The trajectory of microplastics entering fishing ground areas poses potential contamination risk for fish caught by fishermen, threatening the health of marine ecosystems and the stability of their structure and function.
Assuntos
Monitoramento Ambiental , Hidrodinâmica , Microplásticos , Poluentes Químicos da Água , Indonésia , Monitoramento Ambiental/métodos , Poluentes Químicos da Água/análise , Microplásticos/análise , Movimentos da ÁguaRESUMO
When a method throws an exception- its exception precondition-is a crucial element of the method's documentation that clients should know to properly use it. Unfortunately, exceptional behavior is often poorly documented, and sensitive to changes in a project's implementation details that can be onerous to keep synchronized with the documentation. We present wit, an automated technique that extracts the exception preconditions of Java methods and constructors. wit uses static analysis to analyze the paths in a method's implementation that lead to throwing an exception. wit's analysis is precise, in that it only reports exception preconditions that are correct and correspond to feasible exceptional behavior. It is also lightweight: it only needs the source code of the class (or classes) to be analyzed- without building or running the whole project. To this end, its design uses heuristics that give up some completeness (wit cannot infer all exception preconditions) in exchange for precision and ease of applicability. We ran wit on the JDK and 46 Java projects, where it discovered 30 487 exception preconditions in 24 461 methods, taking less than two seconds per analyzed public method on average. A manual analysis of a significant sample of these exception preconditions confirmed that wit is 100% precise, and demonstrated that it can document the exceptional behavior of Java methods.
RESUMO
Previous studies have shown that Automated Program Repair (apr) techniques suffer from the overfitting problem. Overfitting happens when a patch is run and the test suite does not reveal any error, but the patch actually does not fix the underlying bug or it introduces a new defect that is not covered by the test suite. Therefore, the patches generated by apr tools need to be validated by human programmers, which can be very costly, and prevents apr tool adoption in practice. Our work aims to minimize the number of plausible patches that programmers have to review, thereby reducing the time required to find a correct patch. We introduce a novel light-weight test-based patch clustering approach called xTestCluster, which clusters patches based on their dynamic behavior. xTestCluster is applied after the patch generation phase in order to analyze the generated patches from one or more repair tools and to provide more information about those patches for facilitating patch assessment. The novelty of xTestCluster lies in using information from execution of newly generated test cases to cluster patches generated by multiple APR approaches. A cluster is formed of patches that fail on the same generated test cases. The output from xTestCluster gives developers a) a way of reducing the number of patches to analyze, as they can focus on analyzing a sample of patches from each cluster, b) additional information (new test cases and their results) attached to each patch. After analyzing 902 plausible patches from 21 Java apr tools, our results show that xTestCluster is able to reduce the number of patches to review and analyze with a median of 50%. xTestCluster can save a significant amount of time for developers that have to review the multitude of patches generated by apr tools, and provides them with new test cases that expose the differences in behavior between generated patches. Moreover, xTestCluster can complement other patch assessment techniques that help detect patch misclassifications.
RESUMO
This review describes the origin and results of the prospective longitudinal study to test potential prognostic indicators for periodontal breakdown in a population deprived of regular dental care. Experimental gingivitis studies in individuals highly susceptible or highly resistant to periodontitis showed that bleeding on probing developed quite differently: 50% versus 18% bleeding, respectively, after 18 days of no oral hygiene. This formed, together with other clinical and microbiological parameters, the basis for the 15-year prospective study in the Java tea worker population to test potential prognostic indicators for periodontal breakdown. Evaluation showed that during the 15-year observation period of this population aged 15-25 years at baseline, the number of teeth decreased and the periodontal condition deteriorated. Gingival recession showed no increase during the first 7 years of observation, whereas a sixfold increase had occurred thereafter. Attachment loss doubled during the first 7 years, but almost tripled thereafter. Risk markers for disease onset/progression during the first 7 years of observation were age, the number of sites with subgingival calculus, and the subgingival presence of Aggregatibacter actinomycetemcomitans. Over the full period of 15 years the number of sites with a pocket depth of at least 5 mm and the number of sites with recession were identified as risk markers and male gender as a risk determinant. The prevalence of severe periodontitis amounted to 20% in 2002. Analysis showed that, already at baseline and throughout the study period, the periodontal condition in these individuals was more severe compared with the other participants. In conclusion, characteristics of susceptibility to periodontitis are already apparent in young adulthood.
RESUMO
Proteins play an essential role in the functioning of living organisms. The enormity of the atomic interactions in proteins is essential in controlling their spatial structures and dynamics. It can also provide scientists with valuable information that help to determine the native structures of proteins. This paper presents the PIF (Protein Interaction Finder) library for the Java language, enabling the identification of selected atomic interactions (hydrogen and disulfide bonds, ionic, hydrophobic, aromatic-aromatic, sulfur-aromatic, and amino-aromatic interactions) based on the three-dimensional structure of proteins. The interaction calculation rules applied in PIF rely on documented theoretical foundations gathered from experimental studies of interactions in native protein structures. The library has a universal purpose, supporting drug discovery and development processes and protein structure modeling. Finding the atomic interactions can also deliver numerical features for various Artificial Intelligence (AI) models built for protein analysis. The conducted research comparing the results obtained with the use of the PIF library and competing tools has shown that our solution can effectively determine the interactions occurring in protein structures for entire collections of proteins. Moreover, as a solution that provides a programming interface, the PIF library can be used in any Java project, making it a universal tool.
Assuntos
Inteligência Artificial , Proteínas , Biblioteca Gênica , Proteínas/químicaRESUMO
BACKGROUND: Graph databases enable efficient storage of heterogeneous, highly-interlinked data, such as clinical data. Subsequently, researchers can extract relevant features from these datasets and apply machine learning for diagnosis, biomarker discovery, or understanding pathogenesis. METHODS: To facilitate machine learning and save time for extracting data from the graph database, we developed and optimized Decision Tree Plug-in (DTP) containing 24 procedures to generate and evaluate decision trees directly in the graph database Neo4j on homogeneous and unconnected nodes. RESULTS: Creation of the decision tree for three clinical datasets directly in the graph database from the nodes required between 0.059 and 0.099 s, while calculating the decision tree with the same algorithm in Java from CSV files took 0.085-0.112 s. Furthermore, our approach was faster than the standard decision tree implementations in R (0.62 s) and equal to Python (0.08 s), also using CSV files as input for small datasets. In addition, we have explored the strengths of DTP by evaluating a large dataset (approx. 250,000 instances) to predict patients with diabetes and compared the performance against algorithms generated by state-of-the-art packages in R and Python. By doing so, we have been able to show competitive results on the performance of Neo4j, in terms of quality of predictions as well as time efficiency. Furthermore, we could show that high body-mass index and high blood pressure are the main risk factors for diabetes. CONCLUSION: Overall, our work shows that integrating machine learning into graph databases saves time for additional processes as well as external memory, and could be applied to a variety of use cases, including clinical applications. This provides user with the advantages of high scalability, visualization and complex querying.
Assuntos
Algoritmos , Pesquisa Biomédica , Humanos , Índice de Massa Corporal , Bases de Dados Factuais , Árvores de DecisõesRESUMO
INTRODUCTION: Research into current robot middleware has revealed that most of them are either too complicated or outdated. These facts have motivated the development of a new middleware to meet the requirements of usability by non-experts. The proposed middleware is based on Android and is intended to be placed over existing robot SDKs and middleware. It runs on the android tablet of the Cruzr robot. Various toolings have been developed, such as a web component to control the robot via a webinterface, which facilitates its use. METHODS: The middleware was developed using Android Java and runs on the Cruzr tablet as an app. It features a WebSocket server that interfaces with the robot and allows control via Python or other WebSocket-compatible languages. The speech interface utilizes Google Cloud Voice text-to-speech and speech-to-text services. The interface was implemented in Python, allowing for easy integration with existing robotics development workflows, and a web interface was developed for direct control of the robot via the web. RESULTS: The new robot middleware was created and deployed on a Cruzr robot, relying on the WebSocket API and featuring a Python implementation. It supports various robot functions, such as text-to-speech, speech-to-text, navigation, displaying content and scanning bar codes. The system's architecture allows for porting the interface to other robots and platforms, showcasing its adaptability. It has been demonstrated that the middleware can be run on a Pepper robot, although not all functions have been implemented yet. The middleware was utilized to implement healthcare use cases and received good feedback. CONCLUSION: Cloud and local speech services were discussed in regard to the middleware's needs, to run without having to change any code on other robots. An outlook on how the programming interface can further be simplified by using natural text to code generators has been/is given. For other researchers using the aforementioned platforms (Cruzr, Pepper), the new middleware can be utilized for testing human-robot interaction. It can be used in a teaching setting, as well as be adapted to other robots using the same interface and philosophy regarding simple methods.
Assuntos
Robótica , Humanos , Interação Social , Instalações de Saúde , Fala , Atenção à SaúdeRESUMO
This study investigates the characteristics of potentially toxic elements in soils collected from the vicinity of a lead smelter in East Java, Indonesia. The objective is to assess the impact of the lead smelter on the surrounding soil. The study involves chemical composition analysis, spatial distribution mapping, and potential ecological and health risk assessments. Soil samples were collected from the surface area (0-10 cm) and subsurface (15-30 cm) within radii of 1.5 km, 3 km, and 5 km from the lead smelter. The samples were analyzed for As, Cr, Cu, Ni, Pb, and Zn using energy-dispersive X-ray fluorescence. Principal component analysis (PCA) was performed to identify the sources of potentially toxic elements in the soil. The results indicate severe Pb contamination within a 1.5 km radius of the smelter, with an average contamination factor (Cf) value of 22.0, posing a high potential health risk. The contamination factor indicated that the soils were heavily polluted by As and Pb and moderately polluted by Cu, Ni, and Zn. The results of PCA showed that smelter releases are the main source of potentially toxic element contamination in the soil, accounting for 66.2%. The health risk assessment suggested that the children and adults in the study region were exposed to non-carcinogenic risks caused by As and Pb. Oral ingestion was identified as the primary exposure route impacting health risks. The carcinogenic risk from potentially toxic elements in soil was found to exceed the acceptable level for children and adults in the study region. Therefore, it is necessary for the government to take effective measures, including designing regulations and interventions, and improving lead smelter management to mitigate potential contamination and minimize the impact of lead smelter releases on the surrounding environment, especially to protect human health, particularly that of children.
Assuntos
Monitoramento Ambiental , Chumbo , Adulto , Criança , Humanos , Indonésia , Medição de Risco , Carcinógenos , SoloRESUMO
The high maternal mortality rate caused by late detection of risk factors for pregnant women is a major health problem in Banjarnegara District. One of the efforts made to overcome this problem is the implementation of assistance for one pregnant woman by one cadre (OPOC). The application of OPOC consists of four mentoring activities, namely reminders about antenatal care schedule, detecting risk factors, monitoring fetal movements, and carrying out delivery planning and handling complications. Therefore, this study aims to describe the implementation of OPOC as well as to evaluate cadres' performance in Banjarnegara District. A quantitative cross-sectional design was used, where a total of 200 cadres were selected as respondents using a representative purposive sampling method. The results showed that reminding mothers about their antenatal care schedule, detecting risk factors, monitoring of fetal health through movements, and making commitments for birth planning and complications prevention were carried out by 199 (99.49%), 129 (64.84%), 138 (69.05%), and 159 (79.42%) respondents, respectively. More than 92% of them know their duties and responsibilities as companions for pregnant women, but only 28% have knowledge about the benefits of assisting. Furthermore, 93% often carry out OPOC assistance. The knowledge of cadres about OPOC assistance was good, but some of them are not knowledgeable about its benefits. These findings show that they need guidance, training, and motivation from public health centers.
Assuntos
Gestantes , Cuidado Pré-Natal , Feminino , Gravidez , Humanos , Indonésia/epidemiologia , Estudos Transversais , PartoRESUMO
BACKGROUND: The blood level of rifampicin, one of the tuberculosis (TB) drugs, depends on the organic anion transporting polypeptide 1B1 (OATP1B1) in hepatocytes. This protein is encoded by the solute carrier organic anion 1B1 (SLCO1B1) gene. Its genetic variation has been reported to have an impact on clinical outcomes and drug efficacy. However, the polymorphism in the SLCO1B1 gene has not been examined in Indonesia yet. We aimed to identify the frequency of polymorphism in SLCO1B1 gene among pulmonary TB patients in Bandung, Indonesia. METHODS: Cross-sectional study was conducted in West Java. 145 pulmonary TB patients who were treated with first-line drugs treatment (including rifampicin 450 mg daily) were analyzed for polymorphism in SLCO1B1 gene. Patients aged between 18-64 years old and mainly came from Sundanese ethnic group (92.4%). Genetic variants were detected using Polymerase Chain Reaction (PCR) and Sanger sequencing. RESULTS: Polymorphism of c.463C>A(rs11045819) was not identified, while heterozygous and homozygous polymorphism of c.85-7793C>T(rs4149032) were identified in 74 (51.0%) and 56 (38.6%) patients, respectively. The minor allele frequency (MAF) of T (mutant) allele of c.85-7793C>T(rs4149032) was 64.13% (186/209), higher than in the general population, which the MAF of rs4149032 is 53.6% based on 1000 genome database. CONCLUSION: This study highlights the presence of different allele frequencies of polymorphisms within the population, which might affect treatment outcomes.
Assuntos
Transportadores de Ânions Orgânicos , Tuberculose , Humanos , Adolescente , Adulto Jovem , Adulto , Pessoa de Meia-Idade , Rifampina/uso terapêutico , Indonésia , Etnicidade , Estudos Transversais , Tuberculose/tratamento farmacológico , Frequência do Gene , Transportadores de Ânions Orgânicos/genética , Transportadores de Ânions Orgânicos/uso terapêutico , Polimorfismo de Nucleotídeo Único , Genótipo , Transportador 1 de Ânion Orgânico Específico do Fígado/genéticaRESUMO
BACKGROUND: Software for nuclear magnetic resonance (NMR) spectrometers offer general functionality of instrument control and data processing; these applications are often developed with non-scripting languages. NMR users need to flexibly integrate rapidly developing NMR applications with emerging technologies. Scripting systems offer open environments for NMR users to write custom programs. However, existing scripting systems have limited capabilities for both extending the functionality of NMR software's non-script main program and using advanced native script libraries to support specialized application domains (e.g., biomacromolecules and metabolomics). Therefore, it is essential to design a novel scripting system to address both of these needs. RESULT: Here, a novel NMR scripting system named SpinSPJ is proposed. It works as a plug-in in the Java based NMR spectrometer software SpinStudioJ. In the scripting system, both Java based NMR methods and original CPython based libraries are supported. A module has been developed as a bridge to integrate the runtime environments of Java and CPython. The module works as an extension in the CPython environment and interacts with Java via the Java Native Interface. Leveraging this bridge, Java based instrument control and data processing methods of SpinStudioJ can be called with the CPython style. Compared with traditional scripting systems, SpinSPJ better supports both extending the non-script main program and implementing advanced NMR applications with a rich variety of script libraries. NMR researchers can easily call functions of instrument control and data processing as well as developing complex functionality (such as multivariate statistical analysis, deep learning, etc.) with CPython native libraries. CONCLUSION: SpinSPJ offers a user-friendly environment to implement custom functionality leveraging its powerful basic NMR and rich CPython libraries. NMR applications with emerging technologies can be easily integrated. The scripting system is free of charge and can be downloaded by visiting http://www.spinstudioj.net/spinspj .
Assuntos
Inteligência Artificial , Interface Usuário-Computador , Imageamento por Ressonância Magnética , Espectroscopia de Ressonância Magnética , Linguagens de Programação , SoftwareRESUMO
BACKGROUND: The advent of next generation sequencing has opened new avenues for basic and applied research. One application is the discovery of sequence variants causative of a phenotypic trait or a disease pathology. The computational task of detecting and annotating sequence differences of a target dataset between a reference genome is known as "variant calling". Typically, this task is computationally involved, often combining a complex chain of linked software tools. A major player in this field is the Genome Analysis Toolkit (GATK). The "GATK Best Practices" is a commonly referred recipe for variant calling. However, current computational recommendations on variant calling predominantly focus on human sequencing data and ignore ever-changing demands of high-throughput sequencing developments. Furthermore, frequent updates to such recommendations are counterintuitive to the goal of offering a standard workflow and hamper reproducibility over time. RESULTS: A workflow for automated detection of single nucleotide polymorphisms and insertion-deletions offers a wide range of applications in sequence annotation of model and non-model organisms. The introduced workflow builds on the GATK Best Practices, while enabling reproducibility over time and offering an open, generalized computational architecture. The workflow achieves parallelized data evaluation and maximizes performance of individual computational tasks. Optimized Java garbage collection and heap size settings for the GATK applications SortSam, MarkDuplicates, HaplotypeCaller, and GatherVcfs effectively cut the overall analysis time in half. CONCLUSIONS: The demand for variant calling, efficient computational processing, and standardized workflows is growing. The Open source Variant calling workFlow (OVarFlow) offers automation and reproducibility for a computationally optimized variant calling task. By reducing usage of computational resources, the workflow removes prior existing entry barriers to the variant calling field and enables standardized variant calling.
Assuntos
Sequenciamento de Nucleotídeos em Larga Escala , Software , Genoma , Humanos , Polimorfismo de Nucleotídeo Único , Reprodutibilidade dos Testes , Fluxo de TrabalhoRESUMO
BACKGROUND: Previously treated tuberculosis (TB) patients are a widely reported risk factor for multidrug-resistant tuberculosis. Identifying patients' problems during treatment is necessary to control TB, especially in a high-burden setting. We therefore explored barriers to successful TB treatment from the patients' perspective, aiming to identify potential patient-centred care strategies to improve TB treatment outcome in Indonesia. METHODS: A qualitative study was conducted in a province of Indonesia with high TB prevalence. Participants from various backgrounds (i.e., TB patients, physicians, nurses, pharmacists, TB activist, TB programmers at the district and primary care levels) were subject to in-depth interviews and focus group discussions (FGDs). All interviews and FGDs were transcribed verbatim from audio and visual recordings and the respective transcriptions were used for data analysis. Barriers were constructed by interpreting the codes' pattern and co-occurrence. The information's trustworthiness and credibility were established using information saturation, participant validation and triangulation approaches. Data were inductively analysed using the Atlas.ti 8.4 software and reported following the COREQ 32-items. RESULTS: We interviewed 63 of the 66 pre-defined participants and identified 15 barriers. The barriers were classified into three themes, i.e., socio-demography and economy; knowledge and perception and TB treatment. Since the barriers can be interrelated, we determined five main barriers across all barrier themes, i.e., lack of TB knowledge, stigmatisation, long distance to the health facility, adverse drug reaction and loss of household income. CONCLUSION: The main treatment barriers can be considered to strengthen patient-centred care for TB patients in Indonesia. A multi-component approach including TB patients, healthcare providers, broad community and policy makers is required to improve TB treatment success.
Assuntos
Tuberculose Resistente a Múltiplos Medicamentos , Tuberculose , Grupos Focais , Pessoal de Saúde , Humanos , Pesquisa Qualitativa , Tuberculose/tratamento farmacológicoRESUMO
Commercial marine fishes caught locally in East Java, Indonesia, were examined for multivalvulid myxosporeans (Cnidaria: Myxozoa: Myxosporea). Plasmodia of Unicapsula pyramidata were detected in the trunk muscle of two fork-tailed threadfin breams (Nemipterus furcosus). Genetic comparisons of this sample to those collected in the Australian Coral Sea and South China Sea showed few nucleotide substitutions in the small subunit and large subunit ribosomal RNA gene (rDNA) with the species isolated in the Australian Coral Sea and South China Sea. Pseudocysts of two new Kudoa spp. with four shell valves and polar capsules were found in the trunk muscle of two shrimp scads Alepes djedaba and two flathead grey mullets Mugil cephalus. Kudoa javaensis n. sp. myxospores isolated from the shrimp scad were 5.1-7.2 (mean 6.2) µm thick, 6.2-7.9 (7.3) µm wide, and 4.6-6.3 (5.4) µm long, with polar capsules 1.9-2.5 (2.2) µm long and 1.1-1.4 (1.3) µm wide (n = 15). Kudoa surabayaensis n. sp. myxospores isolated from the flathead grey mullet were 5.8-6.7 (6.3) µm thick, 6.4-7.6 (6.9) µm wide, and 4.6-5.0 (4.7) µm long, with polar capsules 1.8-2.4 (2.1) µm long and 0.9-1.3 (1.1) µm wide (n = 25). These two Kudoa spp. showed critical differences in spore shapes (semiquadrate with unequal shell valves vs. equal shell valves), and absence vs. presence of uplifted shell valve termini. Nucleotide sequencing of rDNA supported the morphological differentiation of these two species. Furthermore, these two isolates were morphologically and phylogenetically distinct from any recorded Kudoa spp.
Assuntos
Doenças dos Peixes/parasitologia , Myxozoa/isolamento & purificação , Doenças Parasitárias em Animais/parasitologia , Animais , DNA Ribossômico/genética , Peixes/parasitologia , Indonésia , Músculo Esquelético/parasitologia , Myxozoa/classificação , Myxozoa/genética , Filogenia , RNA Ribossômico 18S/genética , Análise de Sequência de DNARESUMO
The extension for high-performance STFT (Short-Time Fourier Transform) algorithm written entirely in Java language for non-parallel computations is presented in the current paper. This solution could compete with the best available and most common algorithms supplied by libraries such as FFTW or JTransform. The main idea was to move complex computations and expensive functions to the program generation phase. Thus, only core and essential operations were executed during the runtime phase. Furthermore, new approach allows to eliminate the necessity for a rearrangement operation that uses the bit-reversal permutation technique. This article presents a brief description of the STFT solution that was worked out as an extension for the original application, in order to increase its efficiency. The solution remains a Stockham algorithm adapted using metaprogramming techniques and entails an additional reduction its execution time. Performance tests and experiments were conducted using a Java Platform and JMH library, which allowed for accurate execution time measurements. Major aspects of the Java VM like warm-up effects were also taken into consideration. Solution was applied into Electrical Capacitance Tomography measurement system in order to measure the material changes during the silo discharging industrial process.
Assuntos
Algoritmos , Tomografia , Análise de FourierRESUMO
Solid residues obtained after essential oil extraction from Cymbopogon winterianus Jowitt (Java citronella) was explored as a potential source of phenolics/antioxidant. Both the non-distilled plant materials and their solid residues were extracted with Soxhlet extraction method using solvents of various polarity viz. petroleum ether, chloroform, ethyl acetate, acetone, ethanol, methanol, water and various combination of (50% and 75%) of methanol, ethanol, and acetone in water. Different antioxidant assays like 2,2-diphenyl-1- picrylhydrazyl (DPPH), 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS), superoxide anion (SO) radical scavenging assay, ferric-reducing antioxidant power (FRAP) and iron chelating ability along with total phenol (TPC) and flavonoid content (TFC) was measured to evaluate the extract. Compared to distilled materials, the non-distilled plant materials had significantly higher TPC/TFC content and also exhibited higher antioxidant activities. 50% aqueous methanol showed the highest extractive yield, whereas 75% aqueous methanol exhibited the highest TPC and TFC content. The 50% or 75% aqueous methanolic extract also exhibited the highest DPPH, ABTS and SO scavenging activity and ferric-reducing antioxidant power activity. However, ethyl acetate and 75% aqueous acetone extract of non-distilled and distilled plant materials, respectively showed the highest iron chelating activity. The half maximal effective concentration (IC50 = µg/mL) for DPPH, ABTS, SO and metal chelating ability in non-distilled plant extract ranged from 64-387, 92-761, 285-870, and 164-924, respectively, and corresponding value of distilled materials ranged from 144-865, 239-792, 361-833 and 374-867, respectively. The EC50 (µg/mL) for FRAP assay ranged from 118-840 and 151-952 for non-distilled and distilled materials, respectively. The findings of this study indicate the potential of these by-products as a natural antioxidants source.