Microwave-Absorbing Foams with Adjustable Absorption Frequency and Structural Coloration.

Microwave-absorbing materials with regulatable absorption frequency and optical camouflage hold great significance in intelligent electronic devices and advanced stealth technology. Herein, we present an innovative microwave-absorbing foam that can dynamically tune microwave absorption frequencies via a simple mechanical compression while in parallel enabling optical camouflage over broad spectral ranges by adjusting the structural colors. The vivid colors spanning different color categories generated from thin-film interference can be precisely regulated by adjusting the thickness of the conformal TiO2 coatings on Ni/melamine foam. Enhanced interfacial and defect-induced polarizations resulting from the introduction of TiO2 coating synergistically contribute to the dielectric attenuation performance. Consequently, such a foam exhibits exceptional microwave absorption capabilities, and the absorption frequency can be dynamically tuned from the S band to the Ku band by manipulating its compression ratio. Additionally, simulation calculations validate the adjustable electromagnetic wave loss behavior, offering valuable insights for the development of next-generation intelligent electromagnetic devices across diverse fields.

Entropy-Driven Morphology Regulation of MAX Phase Solid Solutions with Enhanced Microwave Absorption and Thermal Insulation Performance.

Morphology regulation and composition design have proved to be effective strategies for the fabrication of desirable microwave absorbers. However, it is still challenging to precisely control the microstructure and components of MAX phases. Herein, an entropy-driven approach, a transition from irregular grains (low entropy) to sheet structure (high entropy), is proposed to modulate the morphology of MAX phases. The theoretical calculation indicates that the morphology evolution can be ascribed to the enlarged energy difference between (11_00) and (0001) facets. The enriched structural defects and optimized morphologies yield significant dipolar polarization, interfacial polarization, multiple reflections, and scattering, which all enhance the electromagnetic wave absorption performance of (V0.25 Ti0.25 Cr0.25 Mo0.25 )2 GaC. Specifically, its minimum reflection loss can reach up to -47.12 dB at 12.13 GHz, and the optimal effective absorption bandwidth is 4.56 GHz (2.03 mm). Meanwhile, (V0.25 Ti0.25 Cr0.25 Mo0.25 )2 GaC shows also pronounced thermal insulation properties affording it good reliability in the harsh working environment. This work offers a novel approach to designing and regulating the morphology of the high entropy MAX phase, and also presents an opportunity to elucidate the relationship between entropy and electromagnetic wave absorption performance.

Confined In-Situ Encapsulation of Co/C Composites with Increased Heterogeneous Interface Polarization for Enhanced Electromagnetic Performance.

It is an urgent problem to realize reliable microwave absorption materials (MAMs) with low density. To address this issue, a series of controlled experiments w ere carried out, which indicated that the tubular structure enables excellent microwave absorption properties with a lower powder filling rate. This performance is attributable to the combined dielectric and magnetic loss mechanisms provided by Co/C and the interface polarization facilitated by multiple heterogeneous interfaces. Particularly, Co@C nanotubes, benefiting from the enhanced heterointerface polarization due to their abundant specific surface area and the reduced electron migration barrier induced by their 1D stacked structure, effectively achieved a dual enhancement of dielectric loss and polarization loss at lower powder filling ratios. Furthermore, the magnetic coupling effect of magnetic nanoparticle arrays in tubular structures is demonstrated by micromagnetic simulation, which have been few reported elsewhere. These propertied enable Co@C nanotubes to achieve minimum reflection loss and maximum effective absorption broadband values of 61.0 dB and 5.5 GHz, respectively, with a powder filling ratio of 20 wt% and a thickness of 1.94 mm. This study reveals the significance of designing 1D structures in reducing powder filling ratio and matching thickness, providing valuable insights for developing MAMs with different microstructures.

Multidimensional Engineering Induced Interfacial Polarization by in-Situ Confined Growth of MoS2 Nanosheets for Enhanced Microwave Absorption.

Interface design has enormous potential for the enhancement of interfacial polarization and microwave absorption properties. However, the construction of interfaces is always limited in components of a single dimension. Developing systematic strategies to customize multidimensional interfaces and fully utilize advantages of low-dimensional materials remains challenging. Two-dimensional transition metal dichalcogenides (TMDCs) have garnered significant attention owing to their distinctive electrical conductivity and exceptional interfacial effects. In this study, a series of hollow TMDCs@C fibers are synthesized via sacrificial template of CdS and confined growth of TMDCs embedded in the fibers. The complex permittivity of the hollow TMDCs@C fibers can be adjusted by tuning the content of CdS templates. Importantly, the multidimensional interfaces of the fibers contribute to elevating the microwave absorption performance. Among the hollow TMDCs@C fibers, the minimum reflection loss (RLmin) of the hollow MoS2@C fibers can reach -52.0 dB at the thickness of 2.5 mm, with a broad effective absorption bandwidth of 4.56 GHz at 2.0 mm. This work establishes an alternative approach for constructing multidimensional coupling interfaces and optimizing TMDCs as microwave absorption materials.

Ultralight Three-Layer Gradient-Structured MXene/ Reduced Graphene Oxide Composite Aerogels with Broadband Microwave Absorption and Dynamic Infrared Camouflage.

Infrared and radar detectors posed substantial challenges to weapon equipment and personnel due to their continuous surveillance and reconnaissance capabilities. Traditional single-band stealth devices are insufficient for dual-band detection in both infrared and microwave bands. To overcome this limitation, a gradient-structured MXene/reduced graphene oxide (rGO) composite aerogel (GMXrGA) is fabricated through a two-step bidirectional freeze casting process, followed by freeze-drying and thermal annealing. GMXrGA exhibits a distinct three-layered structure, with each layer playing a crucial role in microwave absorption. This deliberate design amplifies both the efficiency of microwave absorption and the material's effectiveness in dynamic infrared camouflage. GMXrGA displays an ultralow density of 5.2 mg∙cm-3 and demonstrates exceptional resistance to compression, enduring 200 cycles at a maximum strain of 80%. Moreover, it shows superior microwave absorption performance, with a minimum reflection loss (RLmin) of -60.1 dB at a broad effective absorption bandwidth (EAB) of 14.1 GHz (3.9-18.0 GHz). Additionally, the aerogel exhibits low thermal conductivity (≈26 mW∙m-1∙K-1) and displays dynamic infrared camouflage capabilities within the temperature range of 50-120 °C, achieving rapid concealment within 30 s. Consequently, they hold great potential for diverse applications, including intelligent buildings, wearable electronics, and weapon equipment.

Hierarchical-Bioinspired MOFs Enhanced Electromagnetic Wave Absorption.

Proteins exhibit complex and diverse multi-dimensional structures, along with a wide range of functional groups capable of binding metal ions. By harnessing the unique characteristics of proteins, it is possible to enhance the synthesis of metal-organic frameworks (MOFs) and modify their morphology. Here, the utilization of biomineralized bovine serum albumin (BSA) protein as a template for synthesizing Mil-100 with superior microwave absorption (MA) properties is investigated. The multi-dimensional structure and abundant functional groups of biomineralized BSA protein make it an ideal candidate for guiding the synthesis of Mil-100 with intricate network structures. The BSA@Mil-100 synthesized using this method exhibits exceptional uniformity and monodispersity of nanocrystals. The findings suggest that the BSA protein template significantly influences the regulation of nanocrystal and microstructure formation of Mil-100, resulting in a highly uniform and monodisperse structure. Notably, the synthesized 2-BSA@Mil-100 demonstrates a high reflection loss value of -58 dB at 8.85 GHz, along with a maximum effective absorption bandwidth value of 6.79 GHz, spanning from 6.01 to 12.8 GHz. Overall, this study highlights the potential of utilizing BSA protein as a template for MOF synthesis, offering an effective strategy for the design and development of high-performance MA materials.

Effect of Crystal Transformation on the Intrinsic Defects and the Microwave Absorption Performance of Mo2 TiC2 Tx /RGO Microspheres.

The nitrides and carbides of transition metals are highly favored due to their excellent physical and chemical properties, among which MXene is a hot research topic for microwave absorption. Herein, the controlled preparation of 3D Mo2 TiC2 Tx -based microspheres toward microwave absorption is reported for the first time. With the merits of the performances of both reduced graphite oxide (RGO) and MXene sufficiently considered, the influence of carbonization temperature on the internal crystal structure and the effective microwave-material interaction surface of the prepared Mo2 TiC2 Tx /RGO is systematically investigated. The structure-activity relationships relating the apparent morphology and crystal structure to the microwave absorption performance are deeply explored, and the wave absorption mechanism is put forward as well. The results show that the Mo2 TiC2 Tx /RGO-700 product obtained after heating treatment at 700 °C exhibits excellent microwave absorption performance, with the RLmin being up to -55.1 dB@2.1 mm@13.8 GHz, and the corresponding effective absorption bandwidth covering 5.7 GHz. The outstanding microwave absorption characteristics are attributed to the appropriate impedance matching, high specific surface area, rich intrinsic defects, desirable conductivity, and strong multipolarization capabilities. This work enriches the types of MXene-based composite absorbers and provides a new strategy for controlled preparation of high-performance 3D composite absorbers.

Linkage Effect Induced by Hierarchical Architecture in Magnetic MXene-based Microwave Absorber.

Hierarchical architecture engineering is desirable in integrating the physical-chemical behaviors and macroscopic properties of materials, which present great potential for developing multifunctional microwave absorption materials. However, the intrinsic mechanisms and correlation conditions among cellular units have not been revealed, which are insufficient to maximize the fusion of superior microwave absorption (MA) and derived multifunctionality. Herein, based on three models (disordered structure, porous structure, lamellar structure) of structural units, a range of MXene-aerogels with variable constructions are fabricated by a top-down ice template method. The aerogel with lamellar structure with a density of only 0.015 g cm-3 exhibits the best MA performance (minimum reflection loss: -53.87 dB, effective absorption bandwidth:6.84 GHz) at a 6 wt.% filling ratio, which is preferred over alternative aerogels with variable configurations. This work elucidates the relationship between the hierarchical architecture and the superior MA performance. Further, the MXene/CoNi Composite aerogel with lamellar structure exhibits >90% compression stretch after 1000 cycles, excellent compressive properties, and elasticity, as well as high hydrophobicity and thermal insulation properties, broadening the versatility of MXene-based aerogel applications. In short, through precise microstructure design, this work provides a conceptually novel strategy to realize the integration of electromagnetic stealth, thermal insulation, and load-bearing capability simultaneously.

Wrinkle Structure Regulating Electromagnetic Parameters in Constructed Core-shell ZnFe2O4@PPy Microspheres as Absorption Materials.

Structure engineering of magnetic-dielectric multi-components is emerging as an effective approach for presuming high-performance electromagnetic (EM) absorption, but still faces bottlenecks due to the ambiguous regulation mechanism of surface morphology. Here, a novel wrinkled surface structure is tailored on the ZnFe2O4 microsphere via a spray-pyrolysis induced Kirkendall diffusion effect, the conductivity of the sample is affected, and a better impedance matching is adjusted by modulating the concentration of metal nitrate precursors. Driven by a vapor phase polymerization, conductive polypyrrole (PPy) shell are in situ decorated on the ZnFe2O4 microsphere surfaces, ingeniously constructing a core-shell ZnFe2O4@PPy composites. Moreover, a systematic investigation reveals that this unique wrinkled surface structure is highly dependent on the metal salt concentration. Optimized wrinkle ZnFe2O4@PPy composite exhibits a minimum reflection loss (RLmin) reached -41.0 dB and the effective absorption bandwidth (EAB) can cover as wide as 4.1 GHz. The enhanced interfacial polarization originated from high-density ZnFe2O4-PPy heterostructure, and the conduction loss of PPy contributes to the boosted dielectric loss capability. This study gives a significant guidance for preparing high-performance EM composites by tailoring the surface wrinkle structure.

Controllable Synthesis of Highly Symmetrical Streamlined Structure for Wideband Microwave Absorption.

Highly symmetrical and streamlined nanostructures possessing unique electron scattering, electron-phonon coupling, and electron confinement characteristics have attracted a lot of attention. However, the controllable synthesis of such a nanostructure with regulated shapes and sizes remains a huge challenge. In this work, a peanut-like MnO@C structure, assembled by two core-shell nanosphere is developed via a facile hydrogen ion concentration regulation strategy. Off-axis electron holography technique, charge reconstruction, and COMSOL Multiphysics simulation jointly reveal the unique electronic distribution and confirm its higher dielectric sensitive ability, which can be used as microwave absorption to deal with currently electromagnetic pollution. The results reveal that the peanut-like core-shell MnO@C exhibits great wideband properties with effective absorption bandwidth of 6.6 GHz, covering 10.8-17.2 GHz band. Inspired by this structure-induced sensitively dielectric behavior, promoting the development of symmetrical and streamlined nanostructure would be attractive for many other promising applications in the future, such as piezoelectric material and supercapacitor and electromagnetic shielding.

Tailored Magnetic Spatial Confinement with Enhanced Polarization and Magnetic Response for Electromagnetic Wave Absorption.

For materials with coexisting phases, the transition from a random to an ordered distribution of materials often generates new mechanisms. Although the magnetic confinement effect has improved the electromagnetic (EM) performance, the transition from random to ordered magnetic confinement positions remains a synthetic challenge, and the underlying mechanisms are still unclear. Herein, precise control of magnetic nanoparticles is achieved through a spatial confinement growth strategy, preparing five different modalities of magnetic confined carbon fiber materials, effectively inhibiting magnetic agglomeration. Systematic studies have shown that the magnetic confinement network can refine CoNi NPs size and enhance strong magnetic coupling interactions. Compared to CoNi@HCNFs on the hollow carbon fibers (HCNFs) outer surface, HCNFs@CoNi constructed on the inner surface induce stronger spatial charge polarization relaxation at the interface and exhibit stronger magnetic coupling interactions at the inner surface due to the high-density magnetic coupling units at the micro/nanoscale, thereby respectively enhancing dielectric and magnetic losses. Remarkably, they achieve a minimum reflection loss (RLmin) of -64.54 dB and an absorption bandwidth of 5.60 GHz at a thickness of 1.77 mm. This work reveals the microscale mechanism of magnetic confinement-induced different polarization relaxation and magnetic response, providing a new strategy for designing magnetic materials.

Microporous Cobalt Ferrite with Bio-Carbon Loosely Decorated to Construct Multi-Functional Composite for Dye Adsorption, Anti-Bacteria and Electromagnetic Protection.

Currently, facing electromagnetic protection requirement under complex aqueous environments, the bacterial reproduction and organic dye corrosion may affect the composition and micro-structures of absorbers to weaken their electromagnetic properties. To address such problems, herein, a series of CoFe2O4@BCNPs (cobalt ferrite @ bio-carbon nanoparticles) composites are synthesized via co-hydrothermal and calcining process. The coupling of magnetic cobalt ferrite and dielectric bio-carbon derived from Apium can endow the composite multiple absorption mechanisms and matched impedance for effective microwave absorption, attaining a bandwidth of 8.12 GHz at 2.36 mm and an intensity of -49.85 dB at 3.0 mm. Due to the ROS (reactive oxygen species) stimulation ability and heavy metal ions of cobalt ferrite, the composite realizes an excellent antibacterial efficiency of 99% against Gram negative bacteria of Escherichia coli. Moreover, the loose porous layer of surface stacked bio-carbon can promote the adsorption of methylene blue for subsequent eliminating, a high removal rate of 90.37% for organic dye can be also achieved. This paper offers a new insight for rational design of composite's component and micro-structure to construct multi-functional microwave absorber for satisfying the electromagnetic protection demand in complicated environments.

Lightweight, Flexible, and Thermal Insulating Carbon/SiO2@CNTs Composite Aerogel for High-Efficiency Microwave Absorption.

A complex electromagnetic environment is a formidable challenge in national defense areas. Microwave-absorbing materials are considered as a strategy to tackle this challenge. In this work, lightweight, flexible, and thermal insulating Carbon/SiO2@CNTs (CSC) aerogel is successfully prepared coupled with outstanding microwave absorbing performance, through freeze-drying and high-temperature annealing techniques. The CSC aerogel shows a strong reflection loss (-55.16 dB) as well as wide effective absorbing bandwidth (8.5 GHz) in 2-18 GHz. It also retains good microwave absorption properties under tension and compression. Radar cross-sectional (RCS) simulation result demonstrates the CSC processing a strong reduction ability of RCS compared with a metal plate. Further exploration shows amazing flexibility and good thermal insulation properties of CSC. The successful preparation of this composite aerogel provides a broad prospect for the design of microwave-absorbing materials.

Regulation Dipole Moments of N-Doped Graphene Coordinated with FePc Toward Highly Efficient Microwave Absorption Performance in C Band.

The development of composites with highly efficient microwave absorption (MA) performance deeply depends on polarization loss, which can be induced by charge redistribution. Considering the fact that polarization centers can be easily obtained in graphene, herein, iron phthalocyanine (FePc) is used as polarization site to coordinate with nitrogen-doped graphene (FePc/N-rGO) to optimize MA performance comprehensively. The factors influencing MA properties focus on the interaction between FePc and N-rGO, and the change of dipole moments. The density functional theory (DFT) results demonstrated that FePc has strong interaction with N defect sites in graphene. The charge loss for FePc and charge accumulation for N-rGO occurred, leading to great increase of dipole moment, and the increased dipole moment can be acted as a descriptor to evaluate the enhanced polarization loss. Due to high charge redistribution capacity of N defect sites and FePc polarization centers, the FePc/N-rGO showed excellent MA properties in C band, and the minimum reflection loss value can reach -49.3 dB at 5.4 GHz with thickness of 3.8 mm. In addition, the fabric loaded with FePc/N-rGO showed good heat dissipation property. This work opens the door to the development of MA performance bound to polarization site with dipole moment.

Glass-Blowing-Inspired Upcycling of Thermosetting Polymer to Neuron-Like Hierarchical Carbon for Microwave Absorption and Conversion.

Upgrading thermosetting polymer waste and harvesting unwanted electromagnetic energy are of great significance in solving environmental pollution and energy shortage problems. Herein, inspired by the glass-blowing art, a spontaneous, controllable, and scalable strategy is proposed to prepare hollow carbon materials by inner blowing and outside blocking. Specifically, hierarchically neuron-like hollow carbon materials (HCMSs) with various sizes are fabricated from melamine-formaldehyde sponge (MS) waste. Benefiting from the synergistic of the hollow "cell body" and the connected "protrusions" networks, HCMSs reveal superior electromagnetic absorption performance with a strong reflection loss of -54.9 dB, electromagnetic-heat conversion ability with a high conversion efficiency of 34.4%, and efficient energy storage performance in supercapacitor. Furthermore, a multifunctional device integrating electromagnetic-heat-electrical energy conversion is designed, and its feasibility is proved by experiments and theoretical calculations. The integrated device reveals an output voltage of 34.5 mV and a maximum output power of 0.89 µW with electromagnetic radiation for 60 s. This work provides a novel solution to recycle polymer waste, electromagnetic energy, and unwanted thermal energy.

Fixed-Point Atomic Regulation Engineered Low-Thickness Wideband Microwave Absorption.

Atomic doping is widely employed to fine-tune crystal structures, energy band structures, and the corresponding electrical properties. However, due to the difficulty in precisely regulating doping sites and concentrations, establishing a relationship between electricity properties and doping becomes a huge challenge. In this work, a modulation strategy on A-site cation dopant into spinel-phase metal sulfide Co9S8 lattice via Fe and Ni elements is developed to improve the microwave absorption (MA) properties. At the atomic scale, accurately controlling doped sites can introduce local lattice distortions and strain concentration. Tunned electron energy redistribution of the doped Co9S8 strengthens electron interactions, ultimately enhancing the high-frequency dielectric polarization (ɛ' from 10.5 to 12.5 at 12 GHz). For the Fe-doped Co9S8, the effective absorption bandwidth (EAB) at 1.7 mm increases by 5%, and the minimum reflection loss (RLmin) improves by 26% (EAB = 5.8 GHz, RLmin = -46 dB). The methodology of atomic-scale fixed-point doping presents a promising avenue for customizing the dielectric properties of nanomaterials, imparting invaluable insights for the design of cutting-edge high-performance microwave absorption materials.

In Situ Loading of Ni3ZnC0.7 Nanoparticles with Carbon Nanotubes to 3D Melamine Sponge Derived Hollow Carbon Skeleton toward Superior Microwave Absorption and Thermal Resistance.

The simple and low-cost construction of a 3D network structure is an ideal way to prepare high-performance electromagnetic wave (EMW) absorption materials. Herein, a series of carbon skeleton/carbon nanotubes/Ni3ZnC0.7 composites (CS/CNTs/Ni3ZnC0.7) are successfully prepared by in situ growth of Ni3ZnC0.7 and CNTs on 3D melamine sponge carbon. With the increase of precursor, Ni3ZnC0.7 nanoparticles nucleate and catalyze the generation of CNTs on the surface of the carbon skeleton. The minimum reflection loss (RL) value of the S60min composite (loading time of 60 min) reaches -86.6 dB at 1.6 mm and effective absorption bandwidth (EAB, RL≤-10 dB) is up to 9.3 GHz (8.7-18 GHz). The 3D network sponge carbon with layered micro/nanostructure and hollow skeleton promotes multiple reflection and absorption mechanisms of incident EMW. The N-doping and defects can be equivalent to an electric dipole, providing dipole polarization to increase dielectric relaxation. The uniform Ni3ZnC0.7 nanoparticles and CNTs play a key role in dissipating electromagnetic energy, blocking heat transfer, and enhancing the mechanical properties of the skeleton. Fortunately, the composite displays a quite low thermal conductivity of 0.09075 W m·K-1 and good flexibility, which can provide insulation and quickly recover to its original state after being stressed.

Reversible Switching Between Microwave Absorption and EMI Shielding of VO2 Composite Foam.

Developing lightweight composite with reversible switching between microwave (MW) absorption and electromagnetic interference (EMI) shielding is promising yet remains highly challenging due to the completely inconsistent attenuation mechanism for electromagnetic (EM) radiation. Here, a lightweight vanadium dioxide/expanded polymer microsphere composites foam (VO2/EPM) is designed and fabricated with porous structures and 3D VO2 interconnection, which possesses reversible switching function between MW absorption and EMI shielding under thermal stimulation. The VO2/EPM exhibits MW absorption with a broad effective absorption bandwidth of 3.25 GHz at room temperature (25 °C), while provides EMI shielding of 23.1 dB at moderately high temperature (100 °C). This reversible switching performance relies on the porous structure and tunability of electrical conductivity, complex permittivity, and impedance matching, which are substantially induced by the convertible crystal structure and electronic structure of VO2. Finite element simulation is employed to qualitatively investigate the change in interaction between EM waves and VO2/EPM before and after the phase transition. Moreover, the application of VO2/EPM is demonstrated with a reversible switching function in controlling wireless transmission on/off, showcasing its excellent cycling stability. This kind of smart material with a reversible switching function shows great potential in next-generation electronic devices.

Metal Valence State Modulation Strategy to Design Core@shell Hollow Carbon Microspheres@MoSe2/MoOx Multicomponent Composites for Anti-Corrosion and Microwave Absorption.

The exploitation of multicomponent composites (MCCs) has become the main pathway for obtaining advanced microwave absorption materials (MAMs). Herein, a metal valence state modulation strategy is proposed to tune the electromagnetic (EM) parameters and improve microwave absorption performances. Core@shell hollow carbon microspheres@MoSe2 and hollow carbon microspheres@MoSe2/MoOx MCCs with various mixed-valence states content are well-designed and produced by a simple hydrothermal reaction or/and heat treatment process. The results reveal that the thermal treatment of hollow carbon microspheres@MoSe2 in Ar and Ar/H2 leads to the in situ formation of MoOx and multivalence state, respectively, and the enhanced content of Mo4+ in the designed MCCs greatly boosts their impedance matching characteristics, polarization, and conduction loss capacities, which lead to their evidently improved EM wave absorption properties. Amongst, the as-prepared hollow carbon microspheres@MoSe2/MoOx MCCs achieve an effective absorption bandwidth of 5.80 GHz under a matching thickness of 1.97 mm and minimum reflection loss of -21.49 dB. Therefore, this work offers a simple and universal method to fabricate core@shell hollow carbon microspheres@MoSe2/MoOx MCCs, and a novel and feasible metal valence state modulation strategy is proposed to develop high-efficiency MAMs.

Application of N-doped NiCo2O4/NiO/Co3O4composites rich in oxygen vacancies in electromagnetic wave absorption.

In this work, N-doped and oxygen vacancy-rich NiCo2O4/NiO/Co3O4composites are synthesized by the direct calcination method. Noticeably, by changing the additive concentrations of urea dissolved in DMF (N-N dimethylformamide), the electromagnetic wave (EMW) absorption abilities of NiCo2O4/NiO/Co3O4composite effectively. A maximum reflection loss (RLmax) value at 12.94 GHz for a 2.8 mm thick sheet is -29.76 dB, while its effective absorption bandwidth (RL < -10 dB) reaches 4.21 GHz. In-depth research of possible mechanisms of EMW absorption enhancement. Owing to its simple preparation method and superb EMW absorption properties, the NiCo2O4/NiO/Co3O4composites have a chance to be suitable candidates for high-property EMW absorbers.