Role of atmospheric resonance and land-atmosphere feedbacks as a precursor to the June 2021 Pacific Northwest Heat Dome event.

We demonstrate an indirect, rather than direct, role of quasi-resonant amplification of planetary waves in a summer weather extreme. We find that there was an interplay between a persistent, amplified large-scale atmospheric circulation state and soil moisture feedbacks as a precursor for the June 2021 Pacific Northwest "Heat Dome" event. An extended resonant planetary wave configuration prior to the event created an antecedent soil moisture deficit that amplified lower atmospheric warming through strong nonlinear soil moisture feedbacks, favoring this unprecedented heat event.

Weaker land-atmosphere coupling in global storm-resolving simulation.

The debate on the sign of the soil moisture-precipitation feedback remains open. On the one hand, studies using global coarse-resolution climate models have found strong positive feedback. However, such models cannot represent convection explicitly. On the other hand, studies using km-scale regional climate models and explicit convection have reported negative feedback. Yet, the large-scale circulation is prescribed in such models. This study revisits the soil moisture-precipitation feedback using global, coupled simulations conducted for 1 y with explicit convection and compares the results to coarse-resolution simulations with parameterized convection. We find significant differences in a majority of points with feedback that is weaker and dominantly negative with explicit convection. The model with explicit convection is more often in a wet regime and prefers the triggering of convection over dry soil in the presence of soil moisture heterogeneity, in contrast to the coarse-resolution model. Further analysis indicates that the feedback not only between soil moisture and evapotranspiration but also between evapotranspiration and precipitation is weaker, in better agreement with observations. Our findings suggest that coarse-resolution models may not be well suited to study aspects of climate change over land such as changes in droughts and heatwaves.

Quantifying the environmental limits to fire spread in grassy ecosystems.

Modeling fire spread as an infection process is intuitive: An ignition lights a patch of fuel, which infects its neighbor, and so on. Infection models produce nonlinear thresholds, whereby fire spreads only when fuel connectivity and infection probability are sufficiently high. These thresholds are fundamental both to managing fire and to theoretical models of fire spread, whereas applied fire models more often apply quasi-empirical approaches. Here, we resolve this tension by quantifying thresholds in fire spread locally, using field data from individual fires (n = 1,131) in grassy ecosystems across a precipitation gradient (496 to 1,442 mm mean annual precipitation) and evaluating how these scaled regionally (across 533 sites) and across time (1989 to 2012 and 2016 to 2018) using data from Kruger National Park in South Africa. An infection model captured observed patterns in individual fire spread better than competing models. The proportion of the landscape that burned was well described by measurements of grass biomass, fuel moisture, and vapor pressure deficit. Regionally, averaging across variability resulted in quasi-linear patterns. Altogether, results suggest that models aiming to capture fire responses to global change should incorporate nonlinear fire spread thresholds but that linear approximations may sufficiently capture medium-term trends under a stationary climate.

Climate dependence of the macrofaunal effect on litter decomposition-A global meta-regression analysis.

Litter decomposition by microorganisms and animals is influenced by climate and has been found to be higher in warm and wet than in cold and dry biomes. We, however, hypothesized that the macrofaunal effect on decomposition should increase with temperature and aridity since larger animals are more tolerant to aridity than smaller organisms. This hypothesis was supported by our global analysis of macrofauna exclusion studies. Macrofauna increased litter mass loss on average by 40%, twofold higher than the highest previous estimation of macrofaunal effect on decomposition. The strongest effect was found in subtropical deserts where faunal decomposition had not been considered important. Our results highlight the need to consider animal size when exploring climate dependence of faunal decomposition, and the disproportionately large role of macrofauna in regulating litter decomposition in warm drylands. This new realization is critical for understanding element cycling in the face of global warming and aridification.

Reveal the kernel dehydration mechanisms in maize based on proteomic and metabolomic analysis.

BACKGROUND: Kernel dehydration is an important factor for the mechanized harvest in maize. Kernel moisture content (KMC) and kernel dehydration rate (KDR) are important indicators for kernel dehydration. Although quantitative trait loci and genes related to KMC have been identified, where most of them only focus on the KMC at harvest, these are still far from sufficient to explain all genetic variations, and the relevant regulatory mechanisms are still unclear. In this study, we tried to reveal the key proteins and metabolites related to kernel dehydration in proteome and metabolome levels. Moreover, we preliminarily explored the relevant metabolic pathways that affect kernel dehydration combined proteome and metabolome. These results could accelerate the development of further mechanized maize technologies. RESULTS: In this study, three maize inbred lines (KB182, KB207, and KB020) with different KMC and KDR were subjected to proteomic analysis 35, 42, and 49 days after pollination (DAP). In total, 8,358 proteins were quantified, and 2,779 of them were differentially expressed proteins in different inbred lines or at different stages. By comparative analysis, K-means cluster, and weighted gene co-expression network analysis based on the proteome data, some important proteins were identified, which are involved in carbohydrate metabolism, stress and defense response, lipid metabolism, and seed development. Through metabolomics analysis of KB182 and KB020 kernels at 42 DAP, 18 significantly different metabolites, including glucose, fructose, proline, and glycerol, were identified. CONCLUSIONS: In sum, we inferred that kernel dehydration could be regulated through carbohydrate metabolism, antioxidant systems, and late embryogenesis abundant protein and heat shock protein expression, all of which were considered as important regulatory factors during kernel dehydration process. These results shed light on kernel dehydration and provide new insights into developing cultivars with low moisture content.

Phenotypic and yield responses of common bean (Phaseolus vulgaris l.) varieties to different soil moisture levels.

BACKGROUND: Morphological plasticity is one of the capacities of plants to modify their morphological appearance in response to external stimuli. A plant's morphology and physiology are constantly tuned to its variable surroundings by complex interactions between environmental stimuli and internal signals. In most of plant species,, such phenotypic and physiological expression varies among different varieties based on their levels of particular environmental stress conditions. However, the morphological and yield responses of common bean varieties to different environmental conditions are not well known. The purpose of the study was to evaluate morphological and yield response of common bean to soil moisture stress and to investigate the morphological mechanism by which common bean varieties tolerate fluctuations in moisture stress. METHODS: A pot experiment was carried out to investigate the effects of different moisture levels on the phenotypic and yield responses of common bean varieties. A factorial combination of five common bean varieties (Hirna, kufanzik, Awash-1, Ado, and Chercher) and three moisture levels (control, waterlogging stress, and moisture deficit stress) was used in three replications. Moisture stress treatments were started 20 days after planting, at the trifoliate growth stage. To evaluate the response of each variety, morphological and yield data were collected at week intervals. MAIN RESULTS: The results indicated that moisture levels and varieties had a significant influence on all growth parameters. Crop phenology was significantly influenced by the interaction effect of moisture level and variety. Exposing Hirna variety to moisture stress led to extended flowering and pod setting by 23 and 24 days, respectively, compared to the other treatments. The results showed that the phenotypic responses to moisture deficit and waterlogging stress varied between varieties. Waterlogging stress had a stronger reduction effect on the fresh weight, dry weight and leaf area of common bean varieties than moisture deficit and the control. Pods per plant, seeds per plant, grain yield per plant, and harvest index were significantly influenced by the varieties, moisture stress levels and their interaction. Except for Chercher and Hirna. However, varieties Ado, kufanzik and Awasha-1 did not show significant differences on the time of flower initiation due to moisture level. Biomass and growth in leaf fresh weight, leaf dry weight, leaf area, leaf number and plant height were significantly influenced by moisture level. When moisture deficit and waterlogging stress occurred, Ado and Awash-1 were more responsive to moisture stress than Hirna, Chercher, and Kufanzik. CONCLUSION: Hence, Hirna and Kufanzik varieties were found to be tolerant because they produced higher yields than the Chercher, Awash-1, and Ado varieties.

Equilibrium Moisture Mediated Esterification Reaction to Achieve Over 100% Lignocellulosic Nanofibrils Yield.

Lignocellulosic nanofibrils (LCNFs) isolation is recognized as an efficient strategy for maximizing biomass utilization. Nevertheless, achieving a 100% yield presents a formidable challenge. Here, an esterification strategy mediated by the equilibrium moisture in biomass is proposed for LCNFs preparation without the use of catalysts, resulting in a yield exceeding 100%. Different from anhydrous chemical thermomechanical pulp (CTMP0%), the presence of moisture (moisture content of 7 wt%, denoted as CTMP7%) introduces a notably distinct process for the pretreatment of CTMP, comprising the initial disintegration and the post-esterification steps. The maleic acid, generated through maleic anhydride (MA) hydrolysis, degrades the recalcitrant lignin-carbohydrate complex (LCC) structures, resulting in esterified CTMP7% (E-CTMP7%). The highly grafted esters compensate for the mass loss resulting from the partial removal of hydrolyzed lignin and hemicellulose, ensuring a high yield. Following microfluidization, favorable LCNF7% with a high yield (114.4 ± 3.0%) and a high charge content (1.74 ± 0.09 mmol g-1) can be easily produced, surpassing most previous records for LCNFs. Additionally, LCNF7% presented highly processability for filaments, films, and 3D honeycomb structures preparation. These findings provide valuable insights and guidance for achieving a high yield in the isolation of LCNFs from biomass through the mediation of equilibrium moisture.

Facilely Direct Construction, White-Light Emission, and Color-Adjustable Luminescence of LaF3 :Pr3+ @SiO2 Yolk-Shell Nanospheres with Moisture Resistance.

Poor water stability and single luminous color are the major drawbacks of the most phosphors reported. Therefore, it is important to realize multicolor luminescence in a phosphor with single host and single activator as well as moisture resistance. LaF3 :Pr3+ @SiO2 yolk-shell nanospheres are facilely obtained by a designing new technology of a simple and cost-effective electrospray ionization combined with a dicrucible fluorating technique without using protective gas. In addition, tunable photoluminescence, especially white-light emission, is successfully obtained in LaF3 :Pr3+ @SiO2 yolk-shell nanospheres by adjusting Pr3+ ion concentrations, and the luminescence mechanism of Pr3+ ion is advanced. Compared with the counterpart LaF3 :Pr3+ nanospheres, the water stability of LaF3 :Pr3+ @SiO2 yolk-shell nanospheres is improved by 15% after immersion in water for 72 h, and the fluorescence intensity can be maintained at 86% of the initial intensity. Furthermore, by treating the yolk-shell nanospheres with hydrofluoric acid, it is not only demonstrated that the shell-layer is SiO2 but also core-LaF3 :Pr3+ nanospheres are obtained. Particularly, only fluorination procedure among the halogenation can produce such special yolk-shell nanospheres, the formation mechanism of yolk-shell nanospheres is proposed detailedly based on the sound experiments and a corresponding new technology is built. These findings broaden practical applications of LaF3 :Pr3+ @SiO2 yolk-shell nanospheres.

A Super-Hygroscopic Solar-Regenerated Alginate-Based Composite for Atmospheric Water Harvesting.

Global water scarcity is leading to increasingly tense competition across populations. In order to complement the largely fast-depleting fresh water sources and mitigate the challenges generated by brine discharge from desalination, atmospheric water harvesting (AWH) has emerged to support long-term water supply. This work presents a novel alginate-based hybrid material comprised of porous silico-aluminophosphate-34 (SAPO-34) as fast-transport channel medium as well as hydrophilicity and stability enhancer, and graphene-based sheets as light absorber for solar-enabled evaporation, both optimally incorporated in an alginate matrix, resulting in a composite sorbent capable of harvesting water from the atmosphere with a record intake of up to 6.85 gw gs -1. Natural sunlight is solely used to enable desorption achieving increase of the temperature of the developed network up to 60 °C and resulting in release of the sorbed water, with impurities content well below the World Health Organization (WHO) upper limits. After 30 cycles of sorption and desorption, the composite hydrogel displayed unchanged water uptake and stability. This work provides an impactful perspective toward sustainable generation of water from humidity without external energy consumption supporting the emergence of alternative water production solutions.

Polyurethane Based Smart Composite Fabric for Personal Thermal Management in Multi-Mode.

Textiles with thermal/moisture managing functions are of high interest. However, making the textile sensitive to the surrounding environment is still challenging. Herein, a multimodal smart fabric is developed by stitching together the Ag coated thermal-humidity sensitive thermoplastic polyurethane (Ag-THSPU) and the hybrid of polyvinylidene fluoride and polyurethane (PU-PVDF). The porous PU-PVDF layer is used for solar reflection, infrared emissivity, and water resistance. The Ag-THSPU layer is designed for regulating thermal reflection, sweat evaporation as well as convection. In cold and dry state, the Ag domains are densely packed covering the crystalline polyurethane matrix, featuring low water transmission (102.74 g m-2·24 h-1), high thermal reflection and 2.4 °C warmer than with cotton fabric. In the hot and humid state, the THSPU layer is swollen by sweat and expands in area, resulting in the formation of micro-hook faces where the Ag domains spread apart to promote sweat evaporation (2084.88 g/m-2·24 h-1), thermal radiation and convection, offering 2.5 °C cooler than with cotton fabric. The strategy reported here opens a new door for the development of adaptive textiles in demanding situations.

Ultrafast Bi-Directional Bending Moisture-Responsive Soft Actuators through Superfine Silk Rod Modified Bio-Mimicking Hierarchical Layered Structure.

Development of stimulus-responsive materials is crucial for novel soft actuators. Among these actuators, the moisture-responsive actuators are known for their accessibility, eco-friendliness, and robust regenerative attributes. A major challenge of moisture-responsive soft actuators (MRSAs) is achieving significant bending curvature within short response times. Many plants naturally perform large deformation through a layered hierarchical structure in response to moisture stimuli. Drawing inspiration from the bionic structure of Delosperma nakurense (D. nakurense) seed capsule, here the fabrication of an ultrafast bi-directional bending MRSAs is reported. Combining a superfine silk fibroin rod (SFR) modified graphene oxide (GO) moisture-responsive layer with a moisture-inert layer of reduced graphene oxide (RGO), this actuator demonstrated large bi-directional bending deformation (-4.06 ± 0.09 to 10.44 ± 0.00 cm-1) and ultrafast bending rates (7.06 cm-1 s-1). The high deformation rate is achieved by incorporating the SFR into the moisture-responsive layers, facilitating rapid water transmission within the interlayer structure. The complex yet predictable deformations of this actuator are demonstrated that can be utilized in smart switch, robotic arms, and walking device. The proposed SFR modification method is simple and versatile, enhancing the functionality of hierarchical layered actuators. It holds the potential to advance intelligent soft robots for application in confined environments.

A High-Performance Passive Radiative Cooling Metafabric with Janus Wettability and Thermal Conduction.

With the development of industry and global warming, passive radiative cooling textiles have recently drawn great interest owing to saving energy consumption and preventing heat-related illnesses. Nevertheless, existing cooling textiles often lack efficient sweat management capacity and wearable comfort under many practical conditions. Herein, a hierarchical cooling metafabric that integrates passive radiation, thermal conduction, sweat evaporation, and excellent wearable comfort is reported through an electrospinning strategy. The metafabric presents excellent solar reflectivity (99.7%, 0.3-2.5 µm) and selective infrared radiation (92.4%, 8-13 µm), given that the unique optical nature of materials and wettability gradient/micro-nano hierarchical structure design. The strong moisture-wicking effect (water vapor transmission (WVT) of 2985 g m-2 d-1 and directional water transport index (R) of 1029.8%) and high heat-conduction capacity can synergistically enhance the radiative cooling efficiency of the metafabric. The outdoor experiment reveals that the metafabric can obtain cooling temperatures of 13.8 °C and 19.3 °C in the dry and sweating state, respectively. Meanwhile, the metafabric saves ≈19.3% of annual energy consumption compared with the buildings with HAVC systems in Shanghai. The metafabric also demonstrates desirable breathability, mechanical strength, and washability. The cost-effective and high-performance metafabric may offer a novel avenue for developing next-generation personal cooling textiles.

Quaternized Graphene for High-Performance Moisture Swing Direct Air Capture of CO2.

Nowadays, moisture-swing adsorption technology still relies on quaternary ammonium resins with limited CO2 capacity under ambient air conditions. In this work, a groundbreaking moisture-driven sorbent is developed starting from commercial graphene flakes and using glycidyltrimethylammonium chloride for incorporation of CO2-sensitive quaternary ammonium functional groups. Boasting an outstanding CO2 capture performance under ultra-diluted conditions (namely, 3.24 mmol g-1 at CO2 400 ppm and 20% RH), the functionalized sorbent (fGO) features clear competitive advantages over current technologies for direct air capture. Notably, fGO demonstrated unprecedented moisture-swing capacity, ease of regenerability, versatility, selectivity, and longevity. These distinctive features position the fGO as an advanced and promising solution, showcasing its potential to outperform existing methods for moisture-swing direct air capture of CO2.

Nature-Inspired Molecular-Crowding Enabling Wide-Humidity Range Applicable, Anti-Freezing, and Robust Zwitterionic Hydrogels for On-Skin Electronics.

Hydrogels are currently in the limelight for applications in soft electronics but they suffer from the tendency to lose water or freeze when exposed to dry environments or low temperatures. Molecular crowding is a prevalent occurrence in living cells, in which molecular crowding agents modify the hydrogen bonding structure, causing a significant reduction in water activity. Here, a wide-humidity range applicable, anti-freezing, and robust hydrogel is developed through the incorporation of natural amino acid proline (Pro) and conductive MXene into polyvinyl alcohol (PVA) hydrogel networks. Theoretical calculations reveal that Pro can transform "free water" into "locked water" via the molecular-crowding effect, thereby suppressing water evaporation and ice forming. Accordingly, the prepared hydrogel exhibits high water retention capability, with 77% and 55% being preserved after exposure to 20 °C, 28% relative humidity (RH) and 35 °C, 90% RH for 12 h. Meanwhile, Pro lowers the freezing temperature of the hydrogel to 34 °C and enhances its stretchability and strength. Finally, the PVA/Pro/MXene hydrogels are assembled as multifunctional on-skin strain sensors and conductive electrodes to monitor human motions and detect tiny electrophysiological signals. Collectively, this work provides a molecular crowding strategy that will motivate researchers to develop more advanced hydrogels for versatile applications.

Hydrophilic 1T-WS2 Nanosheet Arrays toward Conductive Textiles for High-Efficient and Continuous Hydroelectric Generation and Storage.

Flexible hydroelectric generators (HEGs) are promising self-powered devices that spontaneously derive electrical power from moisture. However, achieving the desired compatibility between a continuous operating voltage and superior current density remains a significant challenge. Herein, a textile-based van der Waals heterostructure is rationally designed between conductive 1T phase tungsten disulfide@carbonized silk (1T-WS2@CSilk) and carbon black@cotton (CB@Cotton) fabrics with an asymmetric distribution of oxygen-containing functional groups, which enhances the proton concentration gradients toward high-performance wearable HEGs. The vertically staggered 1T-WS2 nanosheet arrays on the CSilk fabric provide abundant hydrophilic nanochannels for rapid carrier transport. Furthermore, the moisture-induced primary battery formed between the active aluminum (Al) electrode and the conductive textiles introduces the desired electric field to facilitate charge separation and compensate for the decreased streaming potential. These devices exhibit a power density of 21.6 µW cm-2, an open-circuit voltage (Voc) of 0.65 V sustained for over 10 000 s, and a current density of 0.17 mA cm-2. This performance makes them capable of supplying power to commercial electronics and human respiratory monitoring. This study presents a promising strategy for the refined design of wearable electronics.

Multifunctional Sandwich-Structured Super-Hygroscopic Zinc-Based MOF-Overlayed Cooling Wearables for Special Personal Thermal Management.

Personal protective equipment pays attention exclusively to external safety protection and ignores the internal thermoregulation of physiological state in association with sweating. Herein, a super-hygroscopic calcium-doped poly(sodium 4-styrenesulfonate) and superhydrophobic metal-organic-framework-overlayed wearables (Ca-PSS/MOF) integrated cooling wearable is proposed for special personal thermal management (PTM). Compared to the pristine fabric, the superhydrophobic MOF wearables exhibit anti-fouling and antibacterial capabilities, and the antibacterial efficiency is up to 99.99% and 98.99% against E. coli and S. aureus, respectively. More importantly, Ca-PSS/MOF demonstrate significant heat index changes up to 25.5 °C by reducing relative humidity dramatically from 91.0% to 60.0% and temperature from 36.5 to 31.6 °C during the running test. The practical feasibility of the Ca-PSS/MOF cooling wearables is well proved with the protective suit of the fireman. Owing to these multifunctional merits, the sandwich-structured cooling Ca-PSS/MOF are expected to provide new insights for designing the next-generation multifunctional apparel for PTM.

Response of the root anatomical structure of Carex moorcroftii to habitat drought in the Western Sichuan Plateau of China.

MAIN CONCLUSION: The anatomical structures of Carex moorcroftii roots showing stronger plasticity during drought had a lower coefficient of variation in cell size in the same habitats, while those showing weaker plasticity had a higher coefficient of variation. The complementary relationship between these factors comprises the adaptation mechanism of the C. moorcroftii root to drought. To explore the effects of habitat drought on root anatomy of hygrophytic plants, this study focused on roots of C. moorcroftii. Five sample plots were set up along a soil moisture gradient in the Western Sichuan Plateau to collect experimental materials. Paraffin sectioning was used to obtain root anatomy, and one-way ANOVA, correlation analysis, linear regression analysis, and RDA ranking were applied to analyze the relationship between root anatomy and soil water content. The results showed that the root transverse section area, thickness of epidermal cells, exodermis and Casparian strips, and area of aerenchyma were significantly and positively correlated with soil moisture content (P < 0.01). The diameter of the vascular cylinder and the number and total area of vessels were significantly and negatively correlated with the soil moisture content (P < 0.01). The plasticity of the anatomical structures was strong for the diameter and area of the vascular cylinder and thickness of the Casparian strip and epidermis, while it was weak for vessel diameter and area. In addition, there was an asymmetrical relationship between the functional adaptation of root anatomical structure in different soil moisture and the variation degree of root anatomical structure in the same soil moisture. Therefore, the roots of C. moorcroftii can shorten the water transport distance from the epidermis to the vascular cylinder, increase the area of the vascular cylinder and the number of vessels, and establish a complementary relationship between the functional adaptation of root anatomical structure in different habitats and the variation degree of root anatomical structure in the same habitat to adapt to habitat drought. This study provides a scientific basis for understanding the response of plateau wetland plants to habitat changes and their ecological adaptation strategies. More scientific experimental methods should be adopted to further study the mutual coordination mechanisms of different anatomical structures during root adaptation to habitat drought for hygrophytic plants.

Forest plant indicator values for moisture reflect atmospheric vapour pressure deficit rather than soil water content.

Soil moisture shapes ecological patterns and processes, but it is difficult to continuously measure soil moisture variability across the landscape. To overcome these limitations, soil moisture is often bioindicated using community-weighted means of the Ellenberg indicator values of vascular plant species. However, the ecology and distribution of plant species reflect soil water supply as well as atmospheric water demand. Therefore, we hypothesized that Ellenberg moisture values can also reflect atmospheric water demand expressed as a vapour pressure deficit (VPD). To test this hypothesis, we disentangled the relationships among soil water content, atmospheric vapour pressure deficit, and Ellenberg moisture values in the understory plant communities of temperate broadleaved forests in central Europe. Ellenberg moisture values reflected atmospheric VPD rather than soil water content consistently across local, landscape, and regional spatial scales, regardless of vegetation plot size, depth as well as method of soil moisture measurement. Using in situ microclimate measurements, we discovered that forest plant indicator values for moisture reflect an atmospheric VPD rather than soil water content. Many ecological patterns and processes correlated with Ellenberg moisture values and previously attributed to soil water supply are thus more likely driven by atmospheric water demand.

Effects of drought and moisture stress on the growth and ecophysiological traits of Schima superba seedlings.

Changes in rainfall patterns are important environmental factors affecting plant growth, especially when larger precipitation events and prolonged drought periods occur in subtropical regions. There are many studies on how drought reduces plant biomass through drought-sensitive functional traits, but how excess water affects plant growth and ecophysiology is still poorly understood. Therefore, a greenhouse experiment was conducted on Schima superba (Theaceae), a dominant tree species in subtropical forests and commonly used in forestry, in a closed chamber under control (25% soil water content (SWC) as in local forests), drought stress (D, 15% SWC) and moisture stress (W, 35% SWC). Plant growth and ecophysiological traits related to morphology, leaf gas exchange, water potential and structural traits were measured. Compared to control, S. suberba under dry conditions significantly decreased its aboveground biomass, photosynthetic rate (A), leaf water potential and nitrogen use efficiency, but increased intrinsic water use efficiency, root to shoot ratio and specific root length. S. superba under wet conditions also significantly decreased its total biomass, aboveground biomass and specific root length, while W had no effect on A and leaf water potential. Our results indicate that S. superba shows a decrease in carbon gain under drought stress, but less response under wet conditions. This emphasizes the need to consider the strength and frequency of rainfall pattern changes in future studies because rainfall may either alleviate or intensify the effects of drought stress depending on the moisture level, thus suitable water conditions is important for better management of this tree species in subtropical China.

Abscisic acid increase correlates with the soil water threshold of transpiration decline during drought.

By regulating carbon uptake and water loss by plants, stomata are not only responsible for productivity but also survival during drought. The timing of the onset of stomatal closure is crucial for preventing excessive water loss during drought, but is poorly explained by plant hydraulics alone and what triggers stomatal closure remains disputed. We investigated whether the hormone abscisic acid (ABA) was this trigger in a highly embolism-resistant tree species Umbellularia californica. We tracked leaf ABA levels, determined the leaf water potential and gravimetric soil water content (gSWC) thresholds for stomatal closure and transpiration decline during a progressive drought. We found that U. californica plants have a peaking-type ABA dynamic, where ABA levels rise early in drought and then decline under prolonged drought conditions. The early increase in ABA levels correlated with the closing of stomata and reduced transpiration. Furthermore, we found that transpiration declined before any large decreases in predawn plant water status and could best be explained by transient drops in midday water potentials triggering increased ABA levels. Our results indicate that ABA-mediated stomatal regulation may be an integral mechanism for reducing transpiration during drought before major drops in bulk soil and plant water status.