Estimation of the forces exerted on the limb long bones of a white rhinoceros (Ceratotherium simum) using musculoskeletal modelling and simulation.

Heavy animals incur large forces on their limb bones, due to the transmission of body weight and ground reaction forces, and the contractions of the various muscles of the limbs. This is particularly true for rhinoceroses, the heaviest extant animals capable of galloping. Several studies have examined their musculoskeletal system and the forces their bones incur, but no detailed quantification has ever been attempted. Such quantification could help understand better the link between form and function in giant land animals. Here we constructed three-dimensional musculoskeletal models of the forelimb and hindlimb of Ceratotherium simum, the heaviest extant rhino species, and used static optimisation (inverse) simulations to estimate the forces applied on the bones when standing at rest, including magnitudes and directions. Overall, unsurprisingly, the most active muscles were antigravity muscles, which generate moments opposing body weight (thereby incurring the ground reaction force), and thus keep the joints extended, avoiding joint collapse via flexion. Some muscles have an antigravity action around several joints, and thus were found to be highly active, likely specialised in body weight support (ulnaris lateralis; digital flexors). The humerus was subjected to the greatest amount of forces in terms of total magnitude; forces on the humerus furthermore came from a great variety of directions. The radius was mainly subject to high-magnitude compressive joint reaction forces, but to little muscular tension, whereas the opposite pattern was observed for the ulna. The femur had a pattern similar to that of the humerus, and the tibia's pattern was intermediate, being subject to great compression in its caudal side but to great tension in its cranial side (i.e. bending). The fibula was subject to by far the lowest force magnitude. Overall, the forces estimated were consistent with the documented morphofunctional adaptations of C. simum's long bones, which have larger insertion areas for several muscles and a greater robusticity overall than those of lighter rhinos, likely reflecting the intense forces we estimated here. Our estimates of muscle and bone (joint) loading regimes for this giant tetrapod improve the understanding of the links between form and function in supportive tissues and could be extended to other aspects of bone morphology, such as microanatomy.

Hindlimb kinematics, kinetics, and muscle dynamics during sit-to-stand and sit-to-walk transitions in emus (Dromaius novaehollandiae).

Terrestrial animals not only need to walk and run but also lie prone to rest and then stand up. Sit-to-stand (STS) and sit-to-walk (STW) transitions are vital behaviours little studied in species other than humans so far, but likely impose biomechanical constraints on limb design because they involve near-maximal excursions of limb joints that should require large length changes and force production from muscles. By integrating data from experiments into musculoskeletal simulations, we analysed joint motions, ground reaction forces, and muscle dynamics during STS and STW in a large terrestrial, bipedal, and cursorial bird: the emu (Dromaius novaehollandiae, ∼30 kg). Simulation results suggest that in both STS and STW, emus operate near the functional limits (∼50 % of shortening/lengthening) of some of their hindlimb muscles, particularly in distal muscles with limited capacity for length change and leverage. Both movements involved high muscle activations (> 50 %) and force generation of the major joint extensor muscles early in the transition. STW required larger net joint moments and non-sagittal motions than STS, entailing greater demands for muscle capacity. Whilst our study involves multiple assumptions, our findings lay the groundwork for future studies to understand, for example, how tendon contributions may reduce excessive muscle demands, especially in the distal hindlimb. As the first investigation into how an avian species stands up, this study provides a foundational framework for future comparative studies investigating organismal morphofunctional specialisations and evolution, offering potential robotics and animal welfare applications.

Multibody dynamics-based musculoskeletal modeling for gait analysis: a systematic review.

Beyond qualitative assessment, gait analysis involves the quantitative evaluation of various parameters such as joint kinematics, spatiotemporal metrics, external forces, and muscle activation patterns and forces. Utilizing multibody dynamics-based musculoskeletal (MSK) modeling provides a time and cost-effective non-invasive tool for the prediction of internal joint and muscle forces. Recent advancements in the development of biofidelic MSK models have facilitated their integration into clinical decision-making processes, including quantitative diagnostics, functional assessment of prosthesis and implants, and devising data-driven gait rehabilitation protocols. Through an extensive search and meta-analysis of over 116 studies, this PRISMA-based systematic review provides a comprehensive overview of different existing multibody MSK modeling platforms, including generic templates, methods for personalization to individual subjects, and the solutions used to address statically indeterminate problems. Additionally, it summarizes post-processing techniques and the practical applications of MSK modeling tools. In the field of biomechanics, MSK modeling provides an indispensable tool for simulating and understanding human movement dynamics. However, limitations which remain elusive include the absence of MSK modeling templates based on female anatomy underscores the need for further advancements in this area.

Effect of fatigue on knee biomechanics during the sidestep cutting manoeuvre: A modelling approach.

Loading both lateral and medial compartments is crucial to understanding the effect of muscle fatigue during sidestep cutting. The present study investigated the changes in tibiofemoral contact forces in the medial and lateral compartments and the muscle force contributions during the sidestep-cutting manoeuvre after a handball-specific fatigue protocol. Twenty female handball athletes performed three trials of the sidestep-cutting manoeuvre before (baseline) and after the fatigue protocol. Motion capture and ground reaction forces were measured, and the data were processed in OpenSim. The variables were compared using statistical parametric mapping (SPM), with a significance level of p < 0.05. The results showed a decreased knee flexion angle during fatigue in the early stance phase. In addition, the post-fatigue analysis demonstrated significantly reduced forces in vasti muscles. Similarly, during fatigue, the SPM analysis showed decreased tibiofemoral contact forces in the vertical and anterior directions. Vertical force applied to both medial and lateral condyles demonstrated a significant reduction after the fatigue protocol. These results indicated that forces applied to the tibiofemoral joint were reduced following the fatigue protocol compared to the baseline values. However, no consistent evidence exists that fatigue increases the risk of knee injuries.

Simulation of Human Movement in Zero Gravity.

In the era of expanding manned space missions, understanding the biomechanical impacts of zero gravity on human movement is pivotal. This study introduces a novel and cost-effective framework that demonstrates the application of Microsoft's Azure Kinect body tracking technology as a motion input generator for subsequent OpenSim simulations in weightlessness. Testing rotations, locomotion, coordination, and martial arts movements, we validate the results' realism under the constraints of angular and linear momentum conservation. While complex, full-body coordination tasks face limitations in a zero gravity environment, our findings suggest possible approaches to device-free exercise routines for astronauts and reveal insights into the feasibility of hand-to-hand combat in space. However, some challenges remain in distinguishing zero gravity effects in the simulations from discrepancies in the captured motion input or forward dynamics calculations, making a comprehensive validation difficult. The paper concludes by highlighting the framework's practical potential for the future of space mission planning and related research endeavors, while also providing recommendations for further refinement.

Towards a validated musculoskeletal knee model to estimate tibiofemoral kinematics and ligament strains: comparison of different anterolateral augmentation procedures combined with isolated ACL reconstructions.

BACKGROUND: Isolated ACL reconstructions (ACLR) demonstrate limitations in restoring native knee kinematics. This study investigates the knee mechanics of ACLR plus various anterolateral augmentations using a patient-specific musculoskeletal knee model. MATERIALS AND METHODS: A patient-specific knee model was developed in OpenSim using contact surfaces and ligament details derived from MRI and CT data. The contact geometry and ligament parameters were varied until the predicted knee angles for intact and ACL-sectioned models were validated against cadaveric test data for that same specimen. Musculoskeletal models of the ACLR combined with various anterolateral augmentations were then simulated. Knee angles were compared between these reconstruction models to determine which technique best matched the intact kinematics. Also, ligament strains calculated by the validated knee model were compared to those of the OpenSim model driven by experimental data. The accuracy of the results was assessed by calculating the normalised RMS error (NRMSE); an NRMSE < 30% was considered acceptable. RESULTS: All rotations and translations predicted by the knee model were acceptable when compared to the cadaveric data (NRMSE < 30%), except for the anterior/posterior translation (NRMSE > 60%). Similar errors were observed between ACL strain results (NRMSE > 60%). Other ligament comparisons were acceptable. All ACLR plus anterolateral augmentation models restored kinematics toward the intact state, with ACLR plus anterolateral ligament reconstruction (ACLR + ALLR) achieving the best match and the greatest strain reduction in ACL, PCL, MCL, and DMCL. CONCLUSION: The intact and ACL-sectioned models were validated against cadaveric experimental results for all rotations. It is acknowledged that the validation criteria are very lenient; further refinement is required for improved validation. The results indicate that anterolateral augmentation moves the kinematics closer to the intact knee state; combined ACLR and ALLR provide the best outcome for this specimen.

Simulated Tibiofemoral Joint Reaction Forces for Three Previously Studied Gait Modifications in Healthy Controls.

Gait modifications, such as lateral trunk lean (LTL), medial knee thrust (MKT), and toe-in gait (TIG), are frequently investigated interventions used to slow the progression of knee osteoarthritis. The Lerner knee model was developed to estimate the tibiofemoral joint reaction forces (JRF) in the medial and lateral compartments during gait. These models may be useful for estimating the effects on the JRF in the knee as a result of gait modifications. We hypothesized that all gait modifications would decrease the JRF compared to normal gait. Twenty healthy individuals volunteered for this study (26.7 ± 4.7 years, 1.75 ± 0.1 m, 73.4 ± 12.4 kg). Ten trials were collected for normal gait as well as for the three gait modifications: LTL, MKT, and TIG. The data were used to estimate the JRF in the first and second peaks for the medial and lateral compartments of the knee via opensim using the Lerner knee model. No significant difference from baseline was found for the first peak in the medial compartment. There was a decrease in JRF in the medial compartment during the loading phase of gait for TIG (6.6%) and LTL (4.9%) and an increasing JRF for MKT (2.6%). but none was statistically significant. A significant increase from baseline was found for TIG (5.8%) in the medial second peak. We found a large variation in individual responses to gait interventions, which may help explain the lack of statistically significant results. Possible factors influencing these wide ranges of responses to gait modifications include static alignment and the impacts of variation in muscle coordination strategies used, by participants, to implement gait modifications.

Moment arms of the coracobrachialis and short head of biceps following a Latarjet procedure: a modeling study.

BACKGROUND: The Latarjet procedure transfers the coracoid process to the anterior glenoid. This prevents recurrent anterior humeral dislocation but alters the origins of the coracobrachialis (CBR) and short head of the biceps (SHB). The impact of this alteration on the moment arms of these muscles has not been examined. METHODS: The Newcastle Shoulder Model was updated with 15 healthy cadaveric bone models to create customized shoulder models. The CBR and SHB muscles were attached to the anterior glenoid via an elliptical wrapping object. Muscle moment arms were calculated for abduction, forward flexion, scapular plane elevation, and internal rotation with 20° and 90° of abduction. Statistical comparison of moment arms between native and Latarjet shoulders was performed using spm1D. RESULTS: By transferring the origins of the CBR and SHB to the anterior glenoid, both muscles had extension moment arms during glenohumeral elevation in the coronal, sagittal, and scapular planes. Their average moment arms during abduction (-30.4 ± 3.2 mm for CBR and -29.8 ± 3.0 mm for SHB) and forward flexion (-26.0 ± 3.1 mm for CBR and -26.2 ± 3.2 mm for SHB) suggested that their role after the Latarjet procedure changed compared with their role in the native shoulder (P < .001). At higher abduction levels, both the muscles had higher internal rotation moment arms compared with the native shoulder. CONCLUSION: The Latarjet procedure affected the moment arms of the CBR and SHB. Both muscles had increased extension and internal rotation moment arms at higher degrees of elevation compared with the native shoulders. This finding suggests that these muscles act as dynamic stabilizers after the Latarjet procedure.

CARRT-Motion Capture Data for Robotic Human Upper Body Model.

In recent years, researchers have focused on analyzing humans' daily living activities to study various performance metrics that humans subconsciously optimize while performing a particular task. In order to recreate these motions in robotic structures based on the human model, researchers developed a framework for robot motion planning which is able to use various optimization methods to replicate similar motions demonstrated by humans. As part of this process, it will be necessary to record the motions data of the human body and the objects involved in order to provide all the essential information for motion planning. This paper aims to provide a dataset of human motion performing activities of daily living that consists of detailed and accurate human whole-body motion data collected using a Vicon motion capture system. The data have been utilized to generate a subject-specific full-body model within OpenSim. Additionally, it facilitated the computation of joint angles within the OpenSim framework, which can subsequently be applied to the subject-specific robotic model developed MATLAB framework. The dataset comprises nine daily living activities and eight Range of Motion activities performed by ten healthy participants and with two repetitions of each variation of one action, resulting in 340 demonstrations of all the actions. A whole-body human motion database is made available to the public at the Center for Assistive, Rehabilitation, and Robotics Technologies (CARRT)-Motion Capture Data for Robotic Human Upper Body Model, which consists of raw motion data in .c3d format, motion data in .trc format for the OpenSim model, as well as post-processed motion data for the MATLAB-based model.

Analysis of Musculoskeletal Biomechanics of Lower Limbs of Drivers in Pedal-Operation States.

In this study, to establish the biomechanical characteristics of commercial vehicle drivers' muscles and bones while operating the three pedals, a driver pedal-operation simulator was built, and the real-life situation was reconstructed in OpenSim 3.3 software. We set up three seat heights to investigate the drivers' lower limbs, and the research proceeded in two parts: experiment and simulation. Chinese adult males in the 95th percentile were selected as the research participants. In the experiment, Delsys wireless surface electromyography (EMG) sensors were used to collect the EMG signals of the four main muscle groups of the lower limbs when the drivers operated the three pedals. Then, we analyzed the muscle activation and the degree of muscle fatigue. The simulation was based on OpenSim software to analyze the driver's lower limb joint angles and joint torque. The results show that the activation of the hamstrings, gastrocnemius, and rectus femoris muscles were higher in the four muscle groups. In respect of torque, in most cases, hip joint torque > knee joint torque > ankle joint torque. The knee joint angles were the largest, and the ankle joint angles changed the most. The experimental results provide a reference for improving drivers' handling comfort in commercial vehicles and provide theoretical bases for cab design and layout optimization.

Peak Tibiofemoral Contact Forces Estimated Using IMU-Based Approaches Are Not Significantly Different from Motion Capture-Based Estimations in Patients with Knee Osteoarthritis.

Altered tibiofemoral contact forces represent a risk factor for osteoarthritis onset and progression, making optimization of the knee force distribution a target of treatment strategies. Musculoskeletal model-based simulations are a state-of-the-art method to estimate joint contact forces, but they typically require laboratory-based input and skilled operators. To overcome these limitations, ambulatory methods, relying on inertial measurement units, have been proposed to estimated ground reaction forces and, consequently, knee contact forces out-of-the-lab. This study proposes the use of a full inertial-capture-based musculoskeletal modelling workflow with an underlying probabilistic principal component analysis model trained on 1787 gait cycles in patients with knee osteoarthritis. As validation, five patients with knee osteoarthritis were instrumented with 17 inertial measurement units and 76 opto-reflective markers. Participants performed multiple overground walking trials while motion and inertial capture methods were synchronously recorded. Moderate to strong correlations were found for the inertial capture-based knee contact forces compared to motion capture with root mean square error between 0.15 and 0.40 of body weight. The results show that our workflow can inform and potentially assist clinical practitioners to monitor knee joint loading in physical therapy sessions and eventually assess long-term therapeutic effects in a clinical context.

Lower Extremity Inverse Kinematics Results Differ Between Inertial Measurement Unit- and Marker-Derived Gait Data.

In-lab, marker-based gait analyses may not represent real-world gait. Real-world gait analyses may be feasible using inertial measurement units (IMUs) in combination with open-source data processing pipelines (OpenSense). Before using OpenSense to study real-world gait, we must determine whether these methods estimate joint kinematics similarly to traditional marker-based motion capture (MoCap) and differentiate groups with clinically different gait mechanics. Healthy young and older adults and older adults with knee osteoarthritis completed this study. We captured MoCap and IMU data during overground walking at 2 speeds. MoCap and IMU kinematics were computed with OpenSim workflows. We tested whether sagittal kinematics differed between MoCap and IMU, whether tools detected between-group differences similarly, and whether kinematics differed between tools by speed. MoCap showed more anterior pelvic tilt (0%-100% stride) and joint flexion than IMU (hip: 0%-38% and 61%-100% stride; knee: 0%-38%, 58%-89%, and 95%-99% stride; and ankle: 6%-99% stride). There were no significant tool-by-group interactions. We found significant tool-by-speed interactions for all angles. While MoCap- and IMU-derived kinematics differed, the lack of tool-by-group interactions suggests consistent tracking across clinical cohorts. Results of the current study suggest that IMU-derived kinematics with OpenSense may enable reliable evaluation of gait in real-world settings.

[Structure Design of Hip Joint Parallel Rehabilitation Exoskeleton].

At present, most of the research on hip exoskeleton robots adopts the method of decoupling analysis of hip joint motion, decoupling the ball pair motion of hip joint into rotational motion on sagittal plane, coronal plane and cross section, and designing it into series mechanism. Aiming at the problems of error accumulation and man-machine coupling in series mechanism, a parallel hip rehabilitation exoskeleton structure is proposed based on the bionic analysis of human hip joint. The structure model is established and the kinematics analysis is carried out. Through the OpenSim software, the curve of hip flexion and extension, adduction and abduction angle in a gait cycle is obtained. The inverse solution of the structure is obtained by the D-H coordinate system method. The gait data points are selected and compared with the inverse solution obtained by ADAMS software simulation. The results show that the inverse solution expression is correct. The parallel hip exoskeleton structure can meet the requirements of the rotation angle of the hip joint of the human body, and can basically achieve the movement of the hip joint, which is helpful to improve the human-computer interaction performance of the exoskeleton.

Effect of two types of shoulder prosthesis on the muscle forces using a generic multibody model for different arm motions.

BACKGROUND: This study aims to analyze the effects of a novel dual-bearing shoulder prosthesis and a conventional reverse shoulder prosthesis on the deltoid and rotator cuff muscle forces for four different arm motions. The dual-bearing prosthesis is a glenoid-sparing joint replacement with a moving center of rotation. It has been developed to treat rotator cuff arthropathy, providing an increased post-operative functionality. METHODS: A three-dimensional musculoskeletal OpenSim® model of an upper body, incorporating a natural gleno-humeral joint and a scapula-thoracic joint developed by Blana et al. (J Biomech 41: 1714-1721, 2008), was used as a reference for the natural shoulder. It was modified by integrating first a novel dual-bearing prosthesis, and second, a reverse shoulder prosthesis into the shoulder joint complex. Four different arm motions, namely abduction, scaption, internal and external rotation, were simulated using an inverse kinematics approach. For each of the three models, shoulder muscle forces and joint reaction forces were calculated with a 2 kg weight in the hand. RESULTS: In general, the maximal shoulder muscle force and joint reaction force values were in a similar range for both prosthesis models during all four motions. The maximal deltoid muscle forces in the model with the dual-bearing prosthesis were 18% lower for abduction and 3% higher for scaption compared to the natural shoulder. The maximal rotator cuff muscle forces in the model with the dual-bearing prosthesis were 36% lower for abduction and 1% higher for scaption compared to the natural shoulder. Although the maximal deltoid muscle forces in the model with the dual-bearing prosthesis in internal and external rotation were 52% and 64% higher, respectively, compared to the natural shoulder, the maximal rotator cuff muscle forces were 27% lower in both motions. CONCLUSION: The study shows that the dual-bearing shoulder prosthesis is a feasible option for patients with rotator cuff tear and has a strong potential to be used as secondary as well as primary joint replacement. The study also demonstrates that computer simulations can help to guide the continued optimization of this particular design concept for successful clinical outcomes.

A Musculoskeletal Model Customized for Sagittal and Frontal Knee Kinematics With Improved Knee Joint Stability.

Current lower limb musculoskeletal (MSK) models focus on sagittal plane kinematics. However, abnormal gait is typically associated with sagittal plane motions crossing into other planes, limiting the use of current MSK models. The purpose of this study was twofold, first, to extend the capability of a full-body MSK model from the literature to include frontal knee plane kinematics during healthy gait, and second, to propose and implement a realistic muscle discretization technique. Two MSK model constructs were derived-the first construct (Knee2_SM) allowed two degrees-of-freedom (sagittal and coronal) at the knee and the second construct (Knee2_MM) implemented multiline elements for all the lower limb muscles in conjunction with two knee degrees-of-freedom. Motion analysis data of normal gait cycle from 10 healthy adults were used to compare joint kinematics, muscle moment arms, muscle forces, and muscle activations, between new constructs and the original model. Knee varus-valgus trajectories were estimated with the mean peak values ranging from 9.49 deg valgus to 1.57 deg varus. Knee2_MM predicted a significant difference (p < 0.05) in moment arms and forces in those muscles responsible for medial-lateral stability of the knee. The simulated muscle activations generated by the Knee2_MM model matched more closely to the experimental electromyography (EMG) when qualitatively compared. This study enhances the capability of the sagittal plane full-body MSK model to incorporate knee varus-valgus motion while keeping the joint stability intact and improving muscle prediction.

The Number and Structure of Muscle Synergies Depend on the Number of Recorded Muscles: A Pilot Simulation Study with OpenSim.

The muscle synergy approach is used to evaluate motor control and to quantitatively determine the number and structure of the modules underlying movement. In experimental studies regarding the upper limb, typically 8 to 16 EMG probes are used depending on the application, although the number of muscles involved in motor generation is higher. Therefore, the number of motor modules may be underestimated and the structure altered with the standard spatial synergy model based on the non-negative matrix factorization (NMF). In this study, we compared the number and structure of muscle synergies when considering 12 muscles (an "average" condition that represents previous studies) and 32 muscles of the upper limb, also including multiple muscle heads and deep muscles. First, we estimated the muscle activations with an upper-limb model in OpenSim using data from multi-directional reaching movements acquired in experimental sessions; then, spatial synergies were extracted from EMG activations from 12 muscles and from 32 muscles and their structures were compared. Finally, we compared muscle synergies obtained from OpenSim and from real experimental EMG signals to assess the reliability of the results. Interestingly, we found that on average, an additional synergy is needed to reconstruct the same R2 level with 32 muscles with respect to 12 muscles; synergies have a very similar structure, although muscles with comparable physiological functions were added to the synergies extracted with 12 muscles. The additional synergies, instead, captured patterns that could not be identified with only 12 muscles. We concluded that current studies may slightly underestimate the number of controlled synergies, even though the main structure of synergies is not modified when adding more muscles. We also show that EMG activations estimated with OpenSim are in partial (but not complete) agreement with experimental recordings. These findings may have significative implications for motor control and clinical studies.

Towards Single Camera Human 3D-Kinematics.

Markerless estimation of 3D Kinematics has the great potential to clinically diagnose and monitor movement disorders without referrals to expensive motion capture labs; however, current approaches are limited by performing multiple de-coupled steps to estimate the kinematics of a person from videos. Most current techniques work in a multi-step approach by first detecting the pose of the body and then fitting a musculoskeletal model to the data for accurate kinematic estimation. Errors in training data of the pose detection algorithms, model scaling, as well the requirement of multiple cameras limit the use of these techniques in a clinical setting. Our goal is to pave the way toward fast, easily applicable and accurate 3D kinematic estimation. To this end, we propose a novel approach for direct 3D human kinematic estimation D3KE from videos using deep neural networks. Our experiments demonstrate that the proposed end-to-end training is robust and outperforms 2D and 3D markerless motion capture based kinematic estimation pipelines in terms of joint angles error by a large margin (35% from 5.44 to 3.54 degrees). We show that D3KE is superior to the multi-step approach and can run at video framerate speeds. This technology shows the potential for clinical analysis from mobile devices in the future.

Pose2Sim: An End-to-End Workflow for 3D Markerless Sports Kinematics-Part 2: Accuracy.

Two-dimensional deep-learning pose estimation algorithms can suffer from biases in joint pose localizations, which are reflected in triangulated coordinates, and then in 3D joint angle estimation. Pose2Sim, our robust markerless kinematics workflow, comes with a physically consistent OpenSim skeletal model, meant to mitigate these errors. Its accuracy was concurrently validated against a reference marker-based method. Lower-limb joint angles were estimated over three tasks (walking, running, and cycling) performed multiple times by one participant. When averaged over all joint angles, the coefficient of multiple correlation (CMC) remained above 0.9 in the sagittal plane, except for the hip in running, which suffered from a systematic 15° offset (CMC = 0.65), and for the ankle in cycling, which was partially occluded (CMC = 0.75). When averaged over all joint angles and all degrees of freedom, mean errors were 3.0°, 4.1°, and 4.0°, in walking, running, and cycling, respectively; and range of motion errors were 2.7°, 2.3°, and 4.3°, respectively. Given the magnitude of error traditionally reported in joint angles computed from a marker-based optoelectronic system, Pose2Sim is deemed accurate enough for the analysis of lower-body kinematics in walking, cycling, and running.

Can Increased Locomotor Task Difficulty Differentiate Knee Muscle Forces After Anterior Cruciate Ligament Reconstruction?

Changes in knee mechanics following anterior cruciate ligament (ACL) reconstruction are known to be magnified during more difficult locomotor tasks, such as when descending stairs. However, it is unclear if increased task difficulty could distinguish differences in forces generated by the muscles surrounding the knee. This study examined how knee muscle forces differ between individuals with ACL reconstruction with different graft types (hamstring tendon and patellar tendon autograft) and "healthy" controls when performing tasks with increasing difficulty. Dynamic simulations were used to identify knee muscle forces in 15 participants when walking overground and descending stairs. The analysis was restricted to the stance phase (foot contact through toe-off), yielding 162 separate simulations of locomotion in increasing difficulty: overground walking, step-to-floor stair descent, and step-to-step stair descent. Results indicated that knee muscle forces were significantly reduced after ACL reconstruction, and stair descent tasks better discriminated changes in the quadriceps and gastrocnemii muscle forces in the reconstructed knees. Changes in quadriceps forces after a patellar tendon graft and changes in gastrocnemii forces after a hamstring tendon graft were only revealed during stair descent. These results emphasize the importance of incorporating sufficiently difficult tasks to detect residual deficits in muscle forces after ACL reconstruction.

Validity and Sensitivity of an Inertial Measurement Unit-Driven Biomechanical Model of Motor Variability for Gait.

Motor variability in gait is frequently linked to fall risk, yet field-based biomechanical joint evaluations are scarce. We evaluated the validity and sensitivity of an inertial measurement unit (IMU)-driven biomechanical model of joint angle variability for gait. Fourteen healthy young adults completed seven-minute trials of treadmill gait at several speeds and arm swing amplitudes. Trunk, pelvis, and lower-limb joint kinematics were estimated by IMU- and optoelectronic-based models using OpenSim. We calculated range of motion (ROM), magnitude of variability (meanSD), local dynamic stability (λmax), persistence of ROM fluctuations (DFAα), and regularity (SaEn) of each angle over 200 continuous strides, and evaluated model accuracy (RMSD: root mean square difference), consistency (ICC2,1: intraclass correlation), biases, limits of agreement, and sensitivity to within-participant gait responses (effects of speed and swing). RMSDs of joint angles were 1.7-9.2° (pooled mean of 4.8°), excluding ankle inversion. ICCs were mostly good to excellent in the primary plane of motion for ROM and in all planes for meanSD and λmax, but were poor to moderate for DFAα and SaEn. Modelled speed and swing responses for ROM, meanSD, and λmax were similar. Results suggest that the IMU-driven model is valid and sensitive for field-based assessments of joint angle time series, ROM in the primary plane of motion, magnitude of variability, and local dynamic stability.