Genome mining and physiological analyses uncover adaptation strategies and biotechnological potential of Virgibacillus dokdonensis T4.6 isolated from high-salt shrimp paste.

Virgibacillus spp. stand out as a potent starter culture for accelerating the fermention of fish sauces and shrimp pastes. However, the underlying molecular mechanisms responsible for their adaptation and biotechnological potential remain elusive. Therefore, the present study focuses on phenotypic and genomic analyses of a halophilic bacterium Virgibacillus dokdonensis T4.6, derived from Vietnamese high-salt fermented shrimp paste. The draft genome contained 4,096,868 bp with 3780 predicted coding sequences. Genome mining revealed the presence of 143 genes involved in osmotic adaptation explaining its resistant phenotype to 24% (w/v) NaCl. Among them, 37 genes making up the complete ectoine metabolism pathway, confirmed its ability to produce 4.38 ± 0.29 wt% ectoine under 12.5% NaCl stress. A significant finding was the identification of 39 genes responsible for an entire degradation pathway of the toxic biogenic amine histamine, which was in agreement with its histamine degradation rate of 42.7 ± 2.1% in the HA medium containing 5 mM histamine within 10 days at 37 °C. Furthermore, 114 proteolytic and 19 lipolytic genes were detected which might contribute to its survival as well as the nutrient quality and flavor of shrimp paste. Of note, a putative gene vdo2592 was found as a possible novel lipase/esterase due to its unique Glycine-Aspartate-Serine-Leucine (GDSL) sequence motif. This is the first report to reveal the adaptative strategies and related biotechnological potential of Virgibacillus associated with femented foods. Our findings indicated that V. dokdonensis T4.6 is a promising starter culture for the production of fermented shrimp paste products.

Response surface methodology use in construction of polianiline-coated carbon paste electrode-based biosensor: Modification and characterization.

In this study, the effect of amperometric glucose biosensor construction and using conditions on the current response was investigated in detail applying experimental design. Polyaniline (PANI) was synthesized on the carbon paste electrode (CPE) surface using the cyclic voltammetry technique in sodium oxalate (NaOx ) electrolyte medium, and an amperometric biosensor was constructed by immobilizing glucose oxidase (GOD). Biosensor preparation (aniline, GOD and NaOx concentrations, and scan rate) and operating conditions (pH and applied potential) were optimized by Box-Behnken and optimal designs, respectively, via State Ease Design Expert 7.0.1.1 software. ANOVA analyses showed that among the biosensor preparation parameters, the NaOx concentration has the highest effect on the current measured in the presence of glucose, whereas in the optimization of pH and potential parameters applied in current measurement studies, it has been revealed that pH has a very high effect on the measured current. Several compounds, such as MWCNT, two different ionic liquids and two different organic molecules were added to carbon paste, and, among them, 2-cyanoethylpyrrole (CPy) enhanced the efficacy highly, most probably due to its polymerization in the paste and increasing the electron transfer rate of the CPE. Sucrose- and lactose-sensitive biosensors were also constructed by co-immobilizing GOD with invertase (INV) or ß-galactosidase, respectively, onto modified CPE, and sensitivities to their substrates were shown by cyclic voltammetry and impedance analysis. CPy modification caused an increase in the current values, and also Imax /KM values increased approximately 11.8, 7.83, and 2.56 times for glucose-, sucrose-, and lactose-sensitive CPEs, respectively.

A disposable edoxaban sensor chip using carbon paste electrode grafted with molecularly imprinted polymer.

Although direct oral anticoagulants (DOACs) are generally safe and TDM is not required, blood levels of the drug are important information for response decisions in emergency care. In this study, an attempt was made to develop a disposable sensor chip for the rapid detection of edoxaban in blood, a type of DOAC. Molecularly imprinted polymers with edoxaban tosilate as a template and sodium p-styrene sulfonate as a functional monomer were grafted onto the surface of graphite particles, mixed with silicon oil dissolved in ferrocene to form a paste, and filled onto a substrate made of plastic film. Sensor chips were fabricated. The current obtained from this sensor by voltammetry within 150 s depended on the edoxaban concentration. Sensitivity to edoxaban was also confirmed in bovine whole blood. The potential of disposable sensors to rapidly detect edoxaban in whole blood was demonstrated in this study, although selectivity, reproducibility, and sensitivity need to be improved for practical use.

Evaluating treatments for the protection of grapevine pruning wounds from natural infection by trunk disease fungi.

Infection of grapevines by fungal pathogens causing grapevine trunk diseases (GTDs) primarily arises from annual pruning wounds made during the dormant season. While various studies have showcased the efficacy of products in shielding pruning wounds against GTDs infections, most of these investigations hinge on artificial pathogen inoculations, which may not faithfully mirror real field conditions. This study aimed to evaluate and compare the efficacy of various liquid formulation fungicides (pyraclostrobin + boscalid) and paste treatments, as well as biological control agents (BCA: Trichoderma atroviride SC1, T. atroviride I-1237, and T. asperellum ICC012 + T. gamsii ICC080), for their potential to prevent natural infection of grapevine pruning wounds by trunk disease fungi in two field trials located in Samaniego (Northern Spain) and Madiran (Southern France) over three growing seasons. Wound treatments were applied immediately after pruning in February. One year after pruning, canes were harvested from vines and brought to the laboratory for assessment of Trichoderma spp. and fungal trunk pathogens. More than 1,200 fungal isolates associated with five GTDs (esca, Botryophaeria, Diaporthe and Eutypa diebacks, and Cytospora canker) were collected from the two vineyards each growing season. Our findings reveal that none of the products under investigation exhibited complete effectiveness against all the GTDs. The efficacy of these products was particularly influenced by the specific year of study. A notable exception was observed with the biocontrol agent T. atroviride I-1237, which consistently demonstrated effectiveness against Botryosphaeria dieback infections throughout each year of the study, irrespective of the location. The remaining products exhibited efficacy in specific years or locations against particular diseases, with the physical barrier (paste) showing the least overall effectiveness. The recovery rates of Trichoderma spp. in treated plants were highly variable, ranging from 17% to 100%, with both strains of T. atroviride yielding the highest isolation rates. This study underscores the importance of customizing treatments for specific diseases, taking into account the influence of environmental factors for BCA applications.

Detecting Forged Audio Files Using "Mixed Paste" Command: A Deep Learning Approach Based on Korean Phonemic Features.

The ubiquity of smartphones today enables the widespread utilization of voice recording for diverse purposes. Consequently, the submission of voice recordings as digital evidence in legal proceedings has notably increased, alongside a rise in allegations of recording file forgery. This trend highlights the growing significance of audio file authentication. This study aims to develop a deep learning methodology capable of identifying forged files, particularly those altered using "Mixed Paste" commands, a technique not previously addressed. The proposed deep learning framework is a composite model, integrating a convolutional neural network and a long short-term memory model. It is designed based on the extraction of features from spectrograms and sequences of Korean consonant types. The training of this model utilizes an authentic dataset of forged audio recordings created on an iPhone, modified via "Mixed Paste", and encoded. This hybrid model demonstrates a high accuracy rate of 97.5%. To validate the model's efficacy, tests were conducted using various manipulated audio files. The findings reveal that the model's effectiveness is not contingent on the smartphone model or the audio editing software employed. We anticipate that this research will advance the field of audio forensics through a novel hybrid model approach.

Bioactive Bismuth Compounds: Is Their Toxicity a Barrier to Therapeutic Use?

Bismuth compounds are considered relatively non-toxic, with their low solubility in aqueous solutions (e.g., biological fluids) being the major contributing factor to this property. Bismuth derivatives are widely used for the treatment of peptic ulcers, functional dyspepsia, and chronic gastritis. Moreover, the properties of bismuth compounds have also been extensively explored in two main fields of action: antimicrobial and anticancer. Despite the clinical interest of bismuth-based drugs, several side effects have also been reported. In fact, excessive acute ingestion of bismuth, or abuse for an extended period of time, can lead to toxicity. However, evidence has demonstrated that the discontinuation of these compounds usually reverses their toxic effects. Notwithstanding, the continuously growing use of bismuth products suggests that it is indeed part of our environment and our daily lives, which urges a more in-depth review and investigation into its possible undesired activities. Therefore, this review aims to update the pharmaco-toxicological properties of bismuth compounds. A special focus will be given to in vitro, in vivo, and clinical studies exploring their toxicity.

Liquiritin Carbomer Gel Cold Paste Promotes Healing of Solar Dermatitis in Mice.

Ultraviolet radiation (UVR) has various effects on human cells and tissues, which can lead to a variety of skin diseases and cause inconvenience to people's lives. Among them, solar dermatitis is one of the important risk factors for malignant melanoma, so prevention and treatment of solar dermatitis is very necessary. Additionally, liquiritin (LQ) has anti-inflammatory effects. In this study, we aimed to evaluate the anti-inflammatory and pro-wound healing effects of liquiritin carbomer gel cold paste (LQ-CG-CP) in vitro and in vivo. The results of MTT experiments showed no cytotoxicity of LQ at concentrations of 40 µg/mL and below and cell damage at UVB irradiation doses above 60 mJ/cm2. Moreover, LQ can promote cell migration. ELISA results also showed that LQ inhibited the elevation of the inflammatory factors tumor necrosis factor-α (TNF-α), interleukin-1ß (IL-1ß), and interleukin-6 (IL-6) after UVB irradiation. In the mouse model of solar dermatitis, 2% LQ-CG-CP showed the best therapeutic efficacy for wound healing and relief of itching compared to MEIBAO moist burn moisturizer (MEBO). What is more, the results of skin histopathological examination show that LQ-CG-CP promotes re-epithelialization, shrinks wounds, and promotes collagen production, thus promoting wound healing. Simultaneously, LQ-CG-CP reduced TNF-α, IL-1ß, and IL-6 expression. In addition, LQ-CG-CP was not observed to cause histopathological changes and blood biochemical abnormalities in mice. Overall, LQ-CG-CP has great potential for the treatment of solar dermatitis.

Treatment of tomato paste wastewater by electrochemical and membrane processes: process optimization and cost calculation.

This study investigated the treatment of wastewater from tomato paste (TP) production using electrocoagulation (EC) and electrooxidation (EO). The effectiveness of water recovery from the pretreated water was then investigated using the membrane process. For this purpose, the effects of independent control variables, including electrode type (aluminum, iron, graphite, and stainless steel), current density (25-75 A/m2), and electrolysis time (15-120 min) on chemical oxygen demand (COD) and color removal were investigated. The results showed that 81.0% of COD and 100% of the color removal were achieved by EC at a current density of 75 A/m2, a pH of 6.84 and a reaction time of 120 min aluminum electrodes. In comparison, EO with graphite electrodes achieved 55.6% of COD and 100% of the color removal under similar conditions. The operating cost was calculated to be in the range of $0.56-30.62/m3. Overall, the results indicate that EO with graphite electrodes is a promising pretreatment process for the removal of various organics. In the membrane process, NP030, NP010, and NF90 membranes were used at a volume of 250 mL and 5 bar. A significant COD removal rate of 94% was achieved with the membrane. The combination of EC and the membrane process demonstrated the feasibility of water recovery from TP wastewater.

A novel and efficient voltammetric sensor for the simultaneous determination of alizarin red S and tartrazine by using poly(leucine) functionalized carbon paste electrode.

In the current work, a rapid, selective, and sensitive technique was developed for the detection of Alizarin Red S (ARS) by applying poly leucine modified carbon paste electrode (PLMCPE). Electrochemical impedance spectroscopy (EIS) and Scanning electron microscopy (SEM) were utilized to study the surface morphology of unmodified carbon paste electrode (UMCPE) and PLMCPE. The active surface area for UMCPE and PLMCPE was found to be 0.0012 cm2 and 0.0026 cm2 respectively. The electrochemical response of ARS at UMCPE and PLMCPE was analyzed using cyclic voltammetry (CV) in the potential window of 0.4 to 1.0 V. The cyclic voltammogram obtained for varying the pH of 0.2 M phosphate buffer (PB) solution showed maximum current for the oxidation of ARS at pH 6.5. The electrochemical reaction of ARS was found to be irreversible and adsorption controlled. The effect of variation of concentration of ARS on the oxidation peak current was evaluated using CV and linear scan voltammetry (LSV). A linear relationship between the concentration variation and current was obtained in the linear range of 1.5 µM-3.5 µM and 0.2 µM-5.0 µM for CV and LSV respectively. The limit of detection (LOD) of 0.68 µM for the CV method and 0.29 µM for the LSV method was exhibited by the developed sensor. The simultaneous study of ARS along with tartrazine (TZ) showed good selectivity for ARS. The interferents of foreign molecules showed no effect on the selectivity of the electrode. The applicability of PLMCPE on real samples gave good recovery ranging from 97.46-101.2%; hence, the sensor can be utilized on real samples. The developed sensor has good stability and sensitivity.

Atypical healing of an endodontic lesion following emergency treatment: a case report.

This case report examines the atypical healing of an endodontic lesion without standard endodontic treatment, influenced by the patient's failure to attend treatment appointments. A 50-year-old woman with no notable medical history presented with a deep carious lesion on her mandibular right first molar, accompanied by localized pain. Citing forgetfulness as a reason, the patient missed her initially scheduled root canal treatment, necessitating an emergency intervention. The emergency treatment included access cavity preparation, irrigation with 5.25% sodium hypochlorite solution, application of a modified triple antibiotic paste (equal parts penicillin G, metronidazole, and ciprofloxacin), and temporary restoration with amalgam. A large apical lesion was detected in immediate postoperative radiographs. However, the patient failed to return for definitive endodontic treatment, due to a lack of symptoms and time for treatment. Follow-up examinations 1 and 5 years after emergency treatment disclosed gradual healing of the lesion, culminating in the establishment of a normal periodontal ligament. This case underscores the potential efficacy of a modified triple antibiotic paste and highlights the importance of a well-sealed coronal restoration in promoting the healing of endodontic lesions, even in the absence of pulpectomy and conventional root canal therapy. Additional research is needed to understand the mechanisms behind such healing events.

Examining the Effects of Asiaticoside on Dental Pulp Stem Cell Viability and Proliferation: A Promising Approach to Root Canal Treatment.

AIM: This study aims to evaluate the impact of asiaticoside (AC) on the viability and proliferation of dental pulp stem cells (DPSCs), considering the known negative effects of routinely used intracanal medicaments. This evaluation will be compared with the outcomes from using traditional intracanal medicaments, specifically triple antibiotic paste (TAP) and calcium hydroxide [Ca(OH)2]. MATERIALS AND METHODS: The DPSCs were obtained from the third molars of an adult donor. The application of flow cytometry was employed to do a phenotypic analysis on DPSCs using CD90, CD73, CD105, CD34, CD14, and CD45 antibodies. The methylthiazol tetrazolium (MTT) assay was employed to assess cellular viability. The cells were treated with different concentrations of TAP and Ca(OH)2 (5, 2.5, 1, 0.5, and 0.25 mg/mL), along with AC (100, 50, 25, 12.5, and 6.25 µM). A cell proliferation rate was performed at 3, 5, and 7 days. RESULTS: The characterization of DPSCs was conducted by flow cytometry analysis, which verified the presence of mesenchymal cell surface antigen molecules (CD105, CD73, and CD90) and demonstrated the absence of hematopoietic markers (CD34, CD45, and CD14). Cells treated with concentrations over 0.5 mg/mL of TAP and Ca(OH)2 showed a notable reduction in cell viability in comparison to the untreated cells (p < 0.05). Additionally, the cells treated with different concentrations of AC 12.5, 6.25, 25, and 50 µM did not differ significantly from the untreated cells (p > 0.05). Nevertheless, cells treated with concentrations of 100 µM showed a significant reduction in viability compared to the untreated cells (p < 0.05). After a period of 7 days, it was noted that cells exposed to three different concentrations of AC (50, 25, and 12.5 µM) had a notable rise in cell density in comparison to TAP and Ca(OH)2 (p < 0.05). Furthermore, cells that were exposed to a concentration of 12.5 µM exhibited the highest cell density. CONCLUSION: The cellular viability of the AC-treated cells was superior to that of the TAP and Ca(OH)2-treated cells. Moreover, the AC with a concentration of 12.5 µM had the highest degree of proliferation. CLINICAL SIGNIFICANCE: This study underscores the importance of evaluating alternative root canal medicaments and their effects on DPSCs' growth and vitality. The findings on AC, particularly its influence on the survival and proliferation of DPSCs, offer valuable insights for its probable use as an intracanal medication. This research contributes to the ongoing efforts to identify safer and more effective intracanal treatments, which are crucial for enhancing patient outcomes in endodontic procedures. How to cite this article: Alazemi MJ, Badawi MF, Elbeltagy MG, et al. Examining the Effects of Asiaticoside on Dental Pulp Stem Cell Viability and Proliferation: A Promising Approach to Root Canal Treatment. J Contemp Dent Pract 2024;25(2):118-127.

[Reflections on good manufacturing practice and quality control system of personalized traditional Chinese medicine preparations].

Personalized traditional Chinese medicine(TCM) preparations have entered a stage of rapid development. The key to the healthy development of this industry is to establish a sound manufacturing standard and quality control system. This paper analyzed the characteristics of personalized TCM preparations and drew reference from the quality management standards in the production of commissioned decoctions and oral pastes, on the basis of which the production quality management scheme and cautions for the safe production of personalized TCM preparations was put forward with consideration to various problems that may exist and occur in the production of such preparations. It provided references for formulating the production standards and quality management system of personalized TCM preparations. The production standards and quality control system should develop with the times. In the future, modern technologies such as big data and artificial intelligence should be employed to achieve the automated and intelligent production and establish a sound quality traceability system, online control strategy, and safety management mode of personalized TCM preparations, which will ensure the healthy development of this industry under requirement of good manufacturing practice(GMP).

Revealing the Succession of Spatial Heterogeneity of the Microbial Community during Broad Bean Paste Fermentation.

This study aimed to elaborate the assembly processes and metabolic regulation of the microbial community under the conditions of environmental factors and artificial intervention using broad bean paste (BBP) fermentation as a tractable research object. Spatial heterogenicity of amino acid nitrogen, titratable acidity, and volatile metabolites were observed between upper and lower layers after fermentation for 2 weeks. Amino nitrogen contents in the upper fermented mash reached 0.86, 0.93, and 1.06 g/100 g at 2, 4, and 6 weeks, respectively, which were significantly higher than those of mash located at the lower layer (0.61, 0.79, and 0.78 g/100 g). Moreover, higher concentrations of titratable acidity were accumulated in upper layers (2.05, 2.25 and 2.56 g/100g) than those in lower layers, and the differentiation of volatile metabolites was the greatest (R = 0.543) at 36 days, after which the BBP flavor profiles converged with the fermentation progress. The successive heterogenicity of the microbial community in the mid-late stage was also found during fermentation, and Zygosaccharomyces, Staphylococcus, and Bacillus had heterogeneous characteristics driven by sunlight, water activity, and microbial interactions. This study provided new insights into the mechanisms underlying the succession and assembly of the microbial community of BBP fermentation, which also laid new clues for researches of the microbial communities in complex ecosystems. IMPORTANCE Gaining insights into the community assembly processes is essential and valuable for the elaboration of underlying ecological patterns. However, current studies about microbial community succession in multispecies fermented food usually treat the research object as a whole, are focused exclusively on temporal dimensions, and have ignored the changes of community structure in spatial dimensions. Therefore, dissecting the community assembly process from the view of spatiotemporal dimensions will be a more comprehensive and detailed perspective. Here, we found the heterogenicity of the BBP microbial community under the traditional production technology from spatial and temporal scales, systematically analyzed the relationship between the spatiotemporal succession of community and the difference of BBP quality, and elucidated the roles of environmental factors and microbial interactions to drive the heterogeneous succession of the microbial community. Our findings provide a new insight into understanding the association between microbial community assembly and the quality of BBP.

Electrochemical aptasensor based on carboxylated graphene oxide modified carbon paste electrode for strontium ultrasensitive detection.

Determination of strontium ions (Sr2+) is crucial with regard to human health and environmental protection. In this work, an electrochemical aptasensor was designed using carboxylated graphene oxide (CGO)-modified carbon paste electrode (CGO/CPE) for ultrasensitive determination of Sr2+ ions. The electrochemical determination was accomplished with employing the constructed G-quadruplex (G4) aptamer at the surface of aptasensor in presence of carmoisine (CA) as an electrochemical label. Moreover, NH2-functionalized aptamer was immobilized onto CGO/CPE via carboxylic group. Hence, differential pulse voltammetry was applied for detection of any possible signal changes of CA on the aptasensor surface. The reduction peak currents of CA in the absence and presence of Sr2+ in solution were different and this difference was linearly dependent to the concentration of Sr2+ in solution. The analytical results revealed that our novel aptasensor showed two appropriate linear ranges (0.1-8.0 pM and 3.0-20.0 nM) versus to Sr2+ ion concentrations with the limit of detection of 0.06 pM (S/N = 3). Excellent stability, selectivity and reproducibility were achieved with this new electrochemical aptasensor. Additionally, the aptasensor showed good achievements in analysis of Sr2+ in aqueous and urine real samples, which making this proposed method a promising candidate for electrochemical detection of Sr2+ in real samples.

Fluorides immobilization through calcium aluminate cement-based backfill: Accessing the detailed leaching characterization under torrential rainfall.

Urbanization and economic development have increased the demand for fertilizers to sustain food crop yields. Huge amounts of by-products, especially phosphogypsum (PG), are generated during the wet processing of rock phosphate to produce fertilizers. Chronic exposure to fluoride in phosphogypsum in groundwater as a result of the weathering of fluoride-containing waste poses a significant health risk to millions of people. We propose a method for using calcium aluminate cement (CAC) to remediate high fluoride contents in solid waste. Column leaching tests under harsh rainfall conditions confirmed the efficient fluoride immobilization capacity of a CAC binder. Although the fluoride concentrations in leachates during the first 1-2 days (1.25 mg/L) slightly exceeded the threshold of 1.00 mg/L, the concentrations over 3-28 days (ranging from 0.98 to 0.83 mg/L) consistently remained well within the acceptable range. Furthermore, our characterization and geochemical modeling revealed the fluoride retention mechanisms of CAC-stabilized PG under laboratory-simulated conditions of torrential rainfall. During leaching, physical encapsulation prevents fluoride from contacting leachate. However, an unfavorable pH value can cause the release of fluoride from the cement matrix, which is subsequently captured by aluminate hydrate through adsorption or co-precipitation. We quantified the carbon footprint of CAC for immobilizing 1 mg of fluoride in PG, obtaining a remarkably low value of 4.4 kg of CO2, in contrast to the emissions associated with the use of ordinary Portland cement (OPC). The findings suggest a unique opportunity for extensive PG remediation. This opportunity extends the horizons of achieving zero-waste emissions in the phosphorus industry and has practical significance in the context of reducing carbon emissions.

A truncated reverse transcriptase enhances prime editing by split AAV vectors.

Prime editing is a new CRISPR-based, genome-editing technology that relies on the prime editor (PE), a fusion protein of Cas9-nickase and M-MLV reverse transcriptase (RT), and a prime editing guide RNA (pegRNA) that serves both to target PE to the desired genomic locus and to carry the edit to be introduced. Here, we make advancements to the RT moiety to improve prime editing efficiencies and truncations to mitigate issues with adeno-associated virus (AAV) viral vector size limitations, which currently do not support efficient delivery of the large prime editing components. These efforts include RT variant screening, codon optimization, and PE truncation by removal of the RNase H domain and further trimming. This led to a codon-optimized and size-minimized PE that has an expression advantage (1.4-fold) and size advantage (621 bp shorter). In addition, we optimize the split intein PE system and identify Rma-based Cas9 split sites (573-574 and 673-674) that combined with the truncated PE delivered by dual AAVs result in superior AAV titer and prime editing efficiency. We also show that this minimized PE gives rise to superior lentiviral vector titers (46-fold) over the regular PE in an all-in-one PE lentiviral vector. We finally deliver the minimized PE to mouse liver by dual AAV8 vectors and show up to 6% precise editing of the PCSK9 gene, thereby demonstrating the value of this truncated split PE system for in vivo applications.

Determination of Cyanide and Cyanoglycosides in Sweetened Bean Paste by HPLC with Fluorescence Detection.

It is necessary to evaluate the efficiency of reduction for cyanide and cyanoglycosides during the manufacturing process from raw material beans to sweetened bean paste in a food hygiene control system from the viewpoint of food safety. Analytical methods for cyanide and cyanoglycoside determination in sweetened bean paste by HPLC with fluorescence detection were developed. In analysis of collection time of free cyanide in the free cyanide assay, the recovery was improved by extending the collection time, the recovery rate was >80% by 2 h. The accuracy, repeatability and intra-laboratory precision of the free cyanide assay were 82.3, 2.0, and 2.4%, respectively. The method for cyanoglycoside analysis was evaluated by 5 repeated spiked recovery experiments at a concentration of 10 ppm. The accuracy, repeatability and intra-laboratory precision of the cyanoglycoside method were 82.2, 1.9, and 3.4%, respectively. These analytical methods will enable the analysis of cyanide and cyanoglycosides in sweetened bean paste without using steam distillation method in the pretreatment.

Biomimetic hydroxyapatite paste for molar-incisor hypomineralization: A randomized clinical trial.

OBJECTIVES: The aim of this randomized clinical trial was to evaluate the desensitizing and remineralizing effect of a new zinc-hydroxyapatite-based paste in sites affected by molar-incisor hypomineralization (MIH), by assessing dental sensitivity, tooth wear, and periodontal indexes. MATERIALS AND METHODS: Twenty-five patients with presence of 1 enamel demineralization of permanent molars and incisors in two different quadrants were recruited. After professional dental hygiene, a domiciliary hydroxyapatite-based paste was assigned and recommended to be applied on 2 MIH teeth in one random quadrant (test group), while the 2 contralateral MIH teeth did not undergo paste application (control group). The following primary outcomes were assessed: Plaque Control Record (PCR), Bleeding Index (BI), MIH Treatment Need Index (MIH-TNI), and Schiff Air Index (SAI). RESULTS: No significant inter- and intragroup differences were found for PI and BI, except for both intragroup T0-T1. For MIH-TNI, significant intergroup differences were detectable in the test group after 9 months of treatment. For SAI values, no significant differences were found in the control group, while in the test group, significant lower values were found after 1 and 3 months since baseline, respectively. CONCLUSIONS AND CLINICAL RELEVANCE: Biomimetic zinc-hydroxyapatite showed a desensitizing effect when used to treat MIH.

Optimizing vancomycin release from novel carbon fiber-reinforced polymer implants with small holes: periprosthetic joint infection treatment.

Periprosthetic joint infection (PJI) is a catastrophic complication after total hip arthroplasty. A new drug-loaded carbon fiber-reinforced polymer (CFRP) prosthesis with a sustained drug-release mechanism is being developed for one-stage surgery. We aimed to examine the diffusion dynamics of vancomycin from vancomycin paste-loaded CFRP implants. The differences in the in vitro diffusion dynamics of vancomycin paste were investigated using the elution test by varying parameters. These included the mixing ratio of vancomycin and distilled water (1:0.8, 1:1.2, and 1:1.4) for vancomycin paste, and hole diameter (1 mm and 2 mm) on the container. The in vivo diffusion dynamics were investigated using a rabbit model with vancomycin-loaded CFRP implants placed subcutaneously. The in vitro experiments showed that the diffusion effect of vancomycin was highest in the parameters of vancomycin paste with distilled water mixed in a ratio of 1:1.4, and with a 2 mm hole diameter. The in vivo experiments revealed diffusion dynamics similar to those observed in the in vitro study. The drug diffusion effect tended to be high for vancomycin paste with a large water ratio, and a large diameter of holes. These results indicate that the drug diffusion dynamics from a CFRP implant with holes can be adjusted by varying the water ratio of the vancomycin paste, and the hole size on the CFRP implant.

Voltammetric determination of Molnupiravir used in treatment of the COVID-19 at magnetite nanoparticle modified carbon paste electrode.

To reduce the progression of the viral process in patients infected with COVID-19, new treatments and drug active substances are needed. One of these drugs is Molnupiravir (MNP) which has a direct antiviral effect and has also proven to be highly effective in reducing the azopharyngeal SARS-CoV-2 infectious virus and viral RNA. Due to the importance and frequent use of this drug in the treatment of COVID-19, its accurate, quick, and cheap detection in pharmaceutical or biological samples is crucial. In this work, electrochemical behavior and sensitive voltammetric determination of MNP are described using a magnetite nanoparticle modified carbon paste electrode (Fe3O4@CPE) for the first time. Fe3O4 nanoparticles (NPs) were characterized by recording their transmission electron microscopy (TEM) images, energy dispersive X-ray (EDX), and X-ray diffraction (XRD) spectra. Cyclic voltammetric measurements showed that MNP was irreversibly oxidized at Fe3O4@CPE at 760 mV in pH 2.0 Britton Robinson buffer solution (BRBS). The peak current of MNP was increased approximately threefold at Fe3O4@CPE compared to bare CPE due to a good electrocatalytic efficiency of Fe3O4 NPs. According to differential pulse voltammetric studies, the fabricated electrode exhibited a linear range (LR) between 0.25 and 750 µM with sensitivity and limit of detection (LOD) of 4591.0 µA mM-1 cm-2 and 0.05 µM, respectively. On the other hand, although lower sensitivity (327.3 µA mM-1 cm-2) was obtained from CV compared to DPV, a wider linear calibration curve between 0.25 and 1500 µM was obtained in CV. Studies performed in tablet samples confirmed that the Fe3O4@CPE exhibits high applicability for selective and accurate voltammetric determination of MNP in real samples.