Autologous semitendinosus meniscus graft significantly improves knee joint kinematics and the tibiofemoral contact after complete lateral meniscectomy.

PURPOSE: The purpose of this study was to investigate the potential of a doubled semitendinosus (ST) and a single gracilis tendon (GT) lateral meniscus autograft to restore the knee joint kinematics and tibiofemoral contact after total lateral meniscectomy (LMM). METHODS: Fourteen human knee joints were tested intact, after LMM and after ST and GT meniscus autograft treatment under an axial load of 200 N during full range of motion (0°-120°) and four randomised loading situations: without external moments, external rotation, valgus stress and a combination of external rotation and valgus stress using a knee joint simulator. Non-parametric statistical analyses were performed on joint kinematics and on the tibiofemoral contact mechanics. RESULTS: LMM led to significant rotational instability of the knee joints (p < 0.02), which was significantly improved after ST autograft application (p < 0.04), except for knee joint flexions > 60°. The GT autograft failed to restore the joint kinematics. LMM significantly increased the tibiofemoral contact pressure (p < 0.03), while decreasing the contact area (p < 0.05). The ST autograft was able to restore the contact mechanics after LMM (p < 0.02), while the GT replacement displayed only an improvement trend. CONCLUSION: The doubled ST lateral meniscus autograft improved the knee joint kinematics significantly and restored the tibiofemoral contact mechanics almost comparable to the native situation. Thus, from a biomechanical point of view, ST meniscus autografts might be a potential treatment alternative for patients who are indicated for meniscus allograft transplantation.

Association between foot posture and tibiofemoral contact forces during barefoot walking in patients with knee osteoarthritis.

BACKGROUND: Accumulating evidence indicates that abnormal foot posture are risk factors for knee osteoarthritis (OA). However, the relationship between foot posture and tibiofemoral contact force (CF) during habitual weight-bearing activities remains unclear. This study aimed to determine the association between tibiofemoral CF and foot posture while walking. METHODS: In total, 18 patients with knee OA and 18 healthy individuals participated in this cross-sectional study. Foot parameters were evaluated by Foot Posture Index (FPI), Staheli Arch Index (SAI), hallux valgus angle, calcaneus inverted angle relative to the floor as a static rearfoot posture, navicular height, and toe grip strength. In addition, all participants underwent kinetic and kinematic measurements during a self-selected speed gait. The measurement device used was the three-dimensional motion analysis system with a sampling rate of 120 Hz. The musculoskeletal model, which has 92 Hill-type muscle-tendon units with 23 degrees of freedom, was used to calculate tibiofemoral CF. Partial correlations was used to investigate the association between foot parameters and total, medial, and lateral tibiofemoral CF of the first and second peaks while controlling for gait speed. RESULTS: A significant negative correlation was observed between Walking SAI and first peak medial tibiofemoral CF in control participants (r = -0.505, p = 0.039). SAI was also significantly positively correlated with first peak medial tibiofemoral CF in patients with knee OA (r = 0.482, p = 0.042). CONCLUSIONS: Our findings revealed a correlation between the medial first peak tibiofemoral CF and the SAI. This study indicates that people with knee OA and flatfoot have excessive first medial tibiofemoral CF during walking.

Release of the medial collateral ligament is mandatory in medial open-wedge high tibial osteotomy.

PURPOSE: The purpose of this study was to quantify the effect of clinically relevant open-wedge high tibial osteotomies on medial collateral ligament (MCL) strain and the resultant tibiofemoral contact mechanics during knee extension and 30° knee flexion. METHODS: Six human cadaveric knee joints were axially loaded (1 kN) in knee extension and 30° knee flexion. Strains at the anterior and posterior regions of the MCL were determined using strain gauges. Tibiofemoral contact mechanics (contact area, mean and maximum contact pressure) were investigated using pressure-sensitive sensors. Open-wedge osteotomy was performed using biplanar cuts and osteotomy angles of 5° and 10° were maintained using an external fixator. Tests were performed first with intact and then with dissected MCL. RESULTS: Nonparametric statistical analyses indicated a significant strain increase (p < 0.01) in the anterior and posterior fibres of the MCL with increasing osteotomy angle of up to 8.3% and 6.0%, respectively. Only after releasing the MCL the desired lateralisation of the mechanical axis was achieved, indicating a significant decrease in the maximum contact pressure in knee extension of - 25% (p = 0.028) and 30° knee flexion of - 21% (p = 0.027). CONCLUSIONS: The results of the present biomechanical study suggest, that an open-wedge high tibial osteotomy is most effective in reducing the medial contact pressure when spreading the osteotomy to 10° and concomitantly releasing the MCL. To transfer the results of this biomechanical study to the clinical day-to-day practice, it is necessary to factor in the individual ligamentous laxity of each patient into the treatment options e.g. particularly for patients with distinct knee ligament laxity or medial ligamentary instability, the release of the MCL should be performed with care. LEVEL OF EVIDENCE: Controlled laboratory study.

The biomechanical effect of increased valgus on total knee arthroplasty: a cadaveric study.

The effects of valgus load on cadaveric knees following total knee arthroplasty (TKA) were investigated using a custom testing system. TKAs were performed on 8 cadaveric knees and tested at 0°, 30°, and 60° knee flexion in both neutral and 5° valgus. Fuji pressure sensitive film was used to quantify contact areas and pressures and MCL strain was determined using a Microscribe digitizing system. Lateral tibiofemoral pressures increased (P < 0.05) at all knee flexion angles with valgus loading. Patellofemoral contact characteristics did not change significantly (P > 0.05). Significant increases in strain were observed along the anterior and posterior border of the MCL at all knee flexion angles. These findings suggest that valgus loading increases TKA joint contact pressures and MCL strain with increasing knee flexion which may increase implant instability.

Comparison of knee biomechanical characteristics during gait between patients with knee osteoarthritis and healthy individuals.

Objective: This study aim to quantify the differences in knee biomechanics during gait between knee osteoarthritis (KOA) patients and healthy individuals. Methods: Twenty KOA patients (4 males and 16 females, 66.2 ± 7.7 years) and twenty controls (16 males and 4 females, 64.8 ± 5.4 years) were recruited for gait test using the motion capture system and force-platform system. The spatiotemporal parameters, knee kinematics and kinetics, and tibiofemoral contact force (TFCF) were calculated using an improved musculoskeletal model. Results: KOA patients walked with reduced speed (48.6 %), stride length (32.9 %), stride height (33.0 %), time proportions of single-support phases (19.2 %), increased gait cycle time (31.0 %), time proportions of stance (8.5 %) and double-support phases (57.7-75.9 %). KOA patients had significant smaller peak flexion angle (29.1 %), flexion ROM (50.6 %) and peak flexion moment (90.2 %), greater peak adduction moment (KAM) (40.7 %), peak rotation moments (KRM) (50.0 %), KAM impulse (106.2 %) and KRM impulse (126.0 %). In proximodistal direction, greater medial TFCF impulse (238 %), total and medial first-peak TFCF (9.6 % and 15.2 %), and smaller lateral peak TFCF (33.3 %) and TFCF impulse (38.4 %) were found in KOA patients. Besides, significant differences were found in the total, medial and lateral peak TFCFs and TFCF impulses in mediolateral direction, and the medial and lateral TFCFs and TFCF impulses in anteroposterior direction. Conclusions: Significant differences were found in the spatiotemporal parameters, knee kinematics and kinetics, and TFCF between the two groups. The results of this study have important implication for clinicians and rehabilitation physicians. These quantified biomechanical differences can provide data support for the personalized and quantified rehabilitation strategies, give suggestions for the exercises of KOA patients, help monitor disease, evaluate surgical treatment, and develop more effective preoperative planning and postoperative rehabilitation strategies.

Can a Musculoskeletal Model Adapted to Knee Implant Geometry Improve Prediction of 3D Contact Forces and Moments?

Tibiofemoral contact loads are crucial parameters in the onset and progression of osteoarthrosis. While contact loads are frequently estimated from musculoskeletal models, their customization is often limited to scaling musculoskeletal geometry or adapting muscle lines. Moreover, studies have usually focused on superior-inferior contact force without investigating three-dimensional contact loads. Using experimental data from six patients with instrumented total knee arthroplasty (TKA), this study customized a lower limb musculoskeletal model to consider the positioning and the geometry of the implant at knee level. Static optimization was performed to estimate tibiofemoral contact forces and contact moments as well as musculotendinous forces. Predictions from both a generic and a customized model were compared to the instrumented implant measurements. Both models accurately predict superior-inferior (SI) force and abduction-adduction (AA) moment. Notably, the customization improves prediction of medial-lateral (ML) force and flexion-extension (FE) moments. However, there is subject-dependent variability in the prediction of anterior-posterior (AP) force. The customized models presented here predict loads on all joint axes and in most cases improve prediction. Unexpectedly, this improvement was more limited for patients with more rotated implants, suggesting a need for further model adaptations such as muscle wrapping or redefinition of hip and ankle joint centers and axes.

A subject-specific musculoskeletal model to predict the tibiofemoral contact forces during daily living activities.

Accurate prediction of tibiofemoral contact force (TFCF) during daily living activities is significant for understanding the initiation, progression, and treatment of knee osteoarthritis (KOA). However, the diversity of target activities, prediction accuracy, and computational efficiency of the current musculoskeletal simulations need to be further improved. In this study, a subject-specific musculoskeletal model considered the tibiofemoral alignment, medial-lateral contact locations, secondary tibiofemoral and all patellofemoral motions, and knee ligaments was proposed to predict the TFCFs during the five daily activities (normal walking, sit-to-stand, stand-to-sit, stair ascent, and stair descent) in OpenSim software. The standing lower-limbs-full-length radiograph, local radiograph of knee joint, motion capture data, and force plate data of eighteen subjects were acquired as the input data of the musculoskeletal model. The results showed good agreements of TFCFs between the predictions based on our proposed musculoskeletal model and the in-vivo measurements based on instrumented knee implants during the five daily activities (RMSE: 0.16 ∼ 0.31 BW, R2: 0.88 ∼ 0.97, M: -0.11 ∼ -0.02, P: 0.03 ∼ 0.10, and C: 0.04 ∼ 0.14). Additionally, the order of the peak total and lateral TFCFs from low to high was normal walking, stair ascent and stand-to-sit, and stair descent and sit-to-stand (P < 0.05), and the peak medial TFCF was stand-to-sit, sit-to-stand, normal walking, stair ascent and stair descent (P < 0.05). The outcomes of this study are valuable for further understanding the knee biomechanics during daily living activities and providing theoretical guidance for the treatments of KOA.

Can a 2D planar model more accurately determine locations of contact developed by the femoral condyles on the tibial insert in total knee arthroplasty than the penetration method?

Knowledge of the anterior-posterior (AP) tibial contact locations is useful in assessing wear of tibial inserts and detecting posterior rim loading. The objectives of this study were to 1) create a new 2D planar model to determine AP tibial contact locations, 2) use the 2D planar model to determine AP tibial contact locations for cadaveric TKA knees, and 3) determine whether errors of the 2D planar model are lower than those of the penetration method. A slopes-of-sagittal profiles (SSP) model was created using mathematical functions to simulate articular surfaces of the tibial insert and femoral condyles. AP tibial contact locations were computed using the model and the penetration method and simultaneously measured with a custom tibial force sensor in 10 cadaveric TKA knees at 0°, 30°, 60°, and 90° of flexion in each compartment during passive motion. For each method, the overall bias, overall precision, and overall root mean square error (RMSE) were calculated from the differences between the computed AP tibial contact locations and the measured locations. The SSP model had an overall bias of 0.6 mm and precision of 2.8 mm which were significantly greater than the overall bias of -0.1 mm (p = 0.0369) and overall precision of 2.0 mm (p = 0.0021) of the penetration method. A planar model based on the analysis of single-plane radiographs did not decrease overall errors in AP tibial contact locations compared to the penetration method.

Influence of Menisci on Tibiofemoral Contact Mechanics in Human Knees: A Systematic Review.

Purpose: Menisci transfer axial loads, while increasing the load-bearing tibiofemoral contact area and decreasing tibiofemoral contact pressure (CP). Numerous clinical and experimental studies agree that an increased CP is one predominant indicator for post-traumatic osteoarthritis (PTOA) of the knee joint. However, due to the immense variability in experimental test setups and wide range of treatment possibilities in meniscus surgery, it is difficult to objectively assess their impact on the CP determination, which is clearly crucial for knee joint health. Therefore, the aim of this systematic review is to investigate the influence of different meniscal injuries and their associated surgical treatments on the CP. Secondly, the influence of different test setups on CP measurements is assessed. On the basis of these results, we established the basis for recommendations for future investigations with the aim to determine CPs under different meniscal states. Methods: This review was conducted in accordance with the PRISMA guidelines. Studies were identified through a systematic literature search in Cochrane, PubMed and Web of Science databases. Literature was searched through pre-defined keywords and medical subject headings. Results: This review indicates a significant increase of up to 235% in peak CP when comparing healthy joints and intact menisci with impaired knee joints, injured or resected menisci. In addition, different test setups were indicated to have major influences on CP: The variety of test setups ranged from standard material testing machines, including customized setups via horizontal and vertical knee joint simulators, through to robotic systems. Differences in applied axial knee joint loads ranged from 0 N up to 2,700 N and resulted unsurprisingly in significantly different peak CPs of between 0.1 and 12.06 MPa. Conclusion: It was shown that untreated traumatic meniscal tears result in an increased CP. Surgical repair intervention were able to restore the CP comparable to the healthy, native condition. Test setup differences and particularly axial joint loading variability also led to major CP differences. In conclusion, when focusing on CP measurements in the knee joint, transparent and traceable in vitro testing conditions are essential to allow researchers to make a direct comparison between future biomechanical investigations.

Estimating Knee Joint Load Using Acoustic Emissions During Ambulation.

Quantifying joint load in activities of daily life could lead to improvements in mobility for numerous people; however, current methods for assessing joint load are unsuitable for ubiquitous settings. The aim of this study is to demonstrate that joint acoustic emissions contain information to estimate this internal joint load in a potentially wearable implementation. Eleven healthy, able-bodied individuals performed ambulation tasks under varying speed, incline, and loading conditions while joint acoustic emissions and essential gait measures-electromyography, ground reaction forces, and motion capture trajectories-were collected. The gait measures were synthesized using a neuromuscular model to estimate internal joint contact force which was the target variable for subject-specific machine learning models (XGBoost) trained based on spectral, temporal, cepstral, and amplitude-based features of the joint acoustic emissions. The model using joint acoustic emissions significantly outperformed (p < 0.05) the best estimate without the sounds, the subject-specific average load (MAE = 0.31 ± 0.12 BW), for both seen (MAE = 0.08 ± 0.01 BW) and unseen (MAE = 0.21 ± 0.05 BW) conditions. This demonstrates that joint acoustic emissions contain information that correlates to internal joint contact force and that information is consistent such that unique cases can be estimated.

Dependency of lower limb joint reaction forces on femoral version.

BACKGROUND: Musculoskeletal (MSK) models based on literature data are meant to represent a generic anatomy and are a popular tool employed by biomechanists to estimate the internal loads occurring in the lower limb joints, such as joint reaction forces (JRFs). However, since these models are normally just linearly scaled to an individual's anthropometry, it is unclear how their estimations would be affected by the personalization of key features of the MSK anatomy, one of which is the femoral version angle. RESEARCH QUESTION: How are the lower limb JRF magnitudes computed through a generic MSK model affected by changes in the femoral version? METHODS: We developed a bone-deformation tool in MATLAB (shared at https://simtk.org/projects/bone_deformity) and used it to create a set of seven OpenSim models spanning from 2˚ femoral retroversion to 40˚ anteversion. We used these models to simulate the gait of an elderly individual with an instrumented prosthesis implanted at their knee joint (5th Grand Challenge dataset) and quantified both the changes in JRFs magnitude due to varying the skeletal anatomy and their accuracy against the correspondent in vivo measurements at the knee joint. RESULTS: Hip and knee JRF magnitudes were affected by the femoral version with variations from the unmodified generic model up to 17.9 ±â€¯4.5% at the hip and 43.4 ±â€¯27.1% at the knee joint. The ankle joint was unaffected by the femoral geometry. The MSK models providing the most accurate knee JRFs (root mean squared error: 0.370 ±â€¯0.068 body weight, coefficient of determination: 0.757 ±â€¯0.104, peak error range: 0.09-0.42 body weight) were those with femoral anteversion angle closer to that measured on the segmented bone of the individual. SIGNIFICANCE: Femoral version substantially affects hip and knee JRFs estimated with generic MSK models, suggesting that personalizing key MSK anatomical features might be necessary for accurate estimation of JRFs with these models.

On the impact force analysis of two-leg landing with a flexed knee.

This article looks into the effects of the initial knee flexion angle at the contact time on the peak of the impulsive lower limb forces during landing, and how these effects are related to muscular activities. The impact dynamics of drop landing is studied via a musculoskeletal model with eight Hill-type lower-limb muscles. A method is proposed for the representation of two landing strategies: landing with high and low joint stiffness. Then, in each landing strategy, the effect of the initial knee flexion angle on the peak ground reaction force (GRF), the peak knee ligaments force and the peak tibiofemoral contact force is investigated by considering different initial contact postures. It is observed that while landing with a flexed knee decreases the peak GRF in both landing strategies, it decreases the peak tibiofemoral and knee ligaments forces only in landing with low joint stiffness. Specifically, by increasing the initial knee flexion from 0° to 70°, the peak tibiofemoral and knee ligaments forces decrease monotonically by 54% and 82%, in landing with low joint stiffness. For high joint stiffness, however, as the initial knee flexion increases from 10° to 70°, the peak tibiofemoral force is seen to increase monotonically by 42% and the peak knee ligaments force is seen to have a non-monotonic behavior, first decreasing by 42%, and then, increasing by 250%. These results can be considered in training landing strategies to reduce the risk of knee injury.

Forces at the Anterior Meniscus Attachments Strongly Increase Under Dynamic Knee Joint Loading.

BACKGROUND: The anatomic appearance and biomechanical and clinical importance of the anterior meniscus roots are well described. However, little is known about the loads that act on these attachment structures under physiological joint loads and movements. HYPOTHESES: As compared with uniaxial loading conditions under static knee flexion angles or at very low flexion-extension speeds, more realistic continuous movement simulations in combination with physiological muscle force simulations lead to significantly higher anterior meniscus attachment forces. This increase is even more pronounced in combination with a longitudinal meniscal tear or after total medial meniscectomy. STUDY DESIGN: Controlled laboratory study. METHODS: A validated Oxford Rig-like knee simulator was used to perform a slow squat, a fast squat, and jump landing maneuvers on 9 cadaveric human knee joints, with and without muscle force simulation. The strains in the anterior medial and lateral meniscal periphery and the respective attachments were determined in 3 states: intact meniscus, medial longitudinal tear, and total medial meniscectomy. To determine the attachment forces, a subsequent in situ tensile test was performed. RESULTS: Muscle force simulation resulted in a significant strain increase at the anterior meniscus attachments of up to 308% (P < .038) and the anterior meniscal periphery of up to 276%. This corresponded to significantly increased forces (P < .038) acting in the anteromedial attachment with a maximum force of 140 N, as determined during the jump landing simulation. Meniscus attachment strains and forces were significantly influenced (P = .008) by the longitudinal tear and meniscectomy during the drop jump simulation. CONCLUSION: Medial and lateral anterior meniscus attachment strains and forces were significantly increased with physiological muscle force simulation, corroborating our hypothesis. Therefore, in vitro tests applying uniaxial loads combined with static knee flexion angles or very low flexion-extension speeds appear to underestimate meniscus attachment forces. CLINICAL RELEVANCE: The data of the present study might help to optimize the anchoring of meniscal allografts and artificial meniscal substitutes to the tibial plateau. Furthermore, this is the first in vitro study to indicate reasonable minimum stability requirements regarding the reattachment of torn anterior meniscus roots.

Muscle contributions to medial and lateral tibiofemoral compressive loads during sidestep cutting.

The tibiofemoral compressive forces experienced during functional activities are believed to be important for maintaining tibiofemoral stability. Previous studies have shown that both knee-spanning and non-knee-spanning muscles contribute to tibiofemoral joint compressive forces during walking. However, healthy individuals typically engage in more vigorous activities (e.g. jumping and cutting) that provide greater challenges to tibiofemoral stability. Despite this, no previous studies have investigated how both knee-spanning and non-knee-spanning muscles contribute to tibiofemoral compressive loading during such tasks. The present study investigated how muscles contributed to the medial and lateral compartment tibiofemoral compressive forces during sidestep cutting. Three-dimensional marker trajectories, ground reaction forces and muscle electromyographic signals were collected from eight healthy males whilst they completed unanticipated sidestep cutting. OpenSim was used to perform musculoskeletal simulations to compute the contribution of each lower-limb muscle to compressive loading of each compartment of the knee. The greatest contributors to medial compartment loading were the vasti, gluteus maximus and medius, and the medial gastrocnemius. The greatest contributors to lateral compartment loading were the vasti, adductors, medial and lateral gastrocnemius, and the soleus. The soleus displayed the greatest potential for unloading the medial compartment, whereas the gluteus maximus and medius displayed the greatest potential for unloading the lateral compartment. These findings may help to inform interventions aiming to modulate compressive loading at the knee.

Accuracy of the tibiofemoral contact forces estimated by a subject-specific musculoskeletal model with fluoroscopy-based contact point trajectories.

Accurate estimation of the tibiofemoral contact forces relies on exact kinematics and joint geometry. Subject-specific kinematic constraints representing contact point trajectories derived from fluoroscopic measurements during lunge are introduced in a musculoskeletal model of the lower limb and compared to generic kinematic constraints. The medial, lateral, and total contact forces during gait and squat are validated using the data of four patients with an instrumented prosthesis. The accuracy of the estimated contact forces (both with subject-specific and generic kinematic constraints) remains close to the level reported in the literature. The mean root mean square errors range from 0.32 to 0.52 body weights for gait and from 0.27 to 0.72 body weights for squat. The impact of the subject-specific contact point trajectories is not found substantial or consistent between patients and tasks. Indeed, the kinematics of the total knee prostheses remains close to the kinematics of a hinge joint and the contact point locations remain generally centred at 20 mm from the tibia centreline (close to the constant value defined in the generic constraints). The contact point trajectories are also suspected to differ between tasks (lunge vs. gait and squat). While the contact point trajectories have been reported to be sensitive model parameters, no clear improvement of the contact force accuracy is demonstrated on patients with instrumented prosthesis. The introduction (as kinematic constraints) of fluoroscopy-based contact point trajectories may be considered in cases where these trajectories are significantly altered, as reported for osteoarthritis patients.

Large medial proximal tibial angles cause excessively medial tibiofemoral contact forces and abnormal knee kinematics following open-wedge high tibial osteotomy.

BACKGROUND: Recurrent varus deformity and poor outcome sometimes occur following open-wedge high tibial osteotomy, but the mechanism remains unclear. The hypothesis of this study was that an excessively large medial proximal tibial angle with lateral joint surface inclination can worsen postoperative knee biomechanics. METHODS: A computer-simulated knee model was validated based on a volunteer knee. Osteotomy models with medial proximal tibial angles ranging from 90° to 97° in 1° increments were developed. Varus alignment correction of the distal femur was performed in each model to maintain identical coronal alignment passing through a point 62.5% lateral to the tibial plateau. The peak tibiofemoral contact forces and knee kinematics were compared in each model during walking and squatting. FINDINGS: All the osteotomy models demonstrated higher peak contact forces on the lateral tibiofemoral joints than on the medial tibiofemoral joints during walking. However, larger medial proximal tibial angles caused excessive increases in medial tibiofemoral contact forces, and the dominant tibiofemoral contact forces shifted to the medial side. Increased medial proximal tibial angles also caused progressive medial collateral ligament tension in knee flexion, but partial medial collateral ligament release effectively reduced medial tibiofemoral contact forces. Models with large medial proximal tibial angles showed nonphysiological roll-forward of the lateral femoral condyle during squatting and no screw-home movement around knee extension. INTERPRETATION: Excessively large medial proximal tibial angles following open-wedge high tibial osteotomy resulted in increased medial tibiofemoral contact forces and abnormal knee kinematics during knee flexion due to medial joint line elevation and ligament imbalance.

Meniscal Replacement With a Silk Fibroin Scaffold Reduces Contact Stresses in the Human Knee.

The aim of the current study was to verify if a previously developed silk fibroin scaffold for meniscal replacement is able to restore the physiological distribution of contact pressure (CP) over the articulating surfaces in the human knee joint, thereby reducing peak loads occurring after partial meniscectomy. The pressure distribution on the medial tibial articular surface of seven human cadaveric knee joints was analysed under continuous flexion-extension movements and under physiological loads up to 2,500 N at different flexion angles. Contact area (CA), maximum tibiofemoral CP, maximum pressure under the meniscus and the pressure distribution were analysed for the intact meniscus, after partial meniscectomy as well as after partial medial meniscal replacement using the silk fibroin scaffold. Implantation of the silk fibroin scaffold considerably improved tibiofemoral contact mechanics after partial medial meniscectomy. While the reduced CA after meniscectomy was not fully restored by the silk fibroin scaffold, clinically relevant peak pressures on the articular cartilage surface occurring after partial meniscectomy were significantly reduced. Nevertheless, at high flexion angles static testing demonstrated that normal pressure distribution comparable to the intact meniscus could not be fully achieved. The current study demonstrates that the silk fibroin implant possesses attributes that significantly improve tibiofemoral CPs within the knee joint following partial meniscectomy. However, the failure to fully recapitulate the CAs and pressures observed in the intact meniscus, particularly at high flexion angles, indicates that the implant's biomechanical properties may require further improvement to completely restore tibiofemoral contact mechanics. © 2019 The Authors. Journal of Orthopaedic Research® published by Wiley Periodicals, Inc. on behalf of Orthopaedic Research Society. J Orthop Res 37:2583-2592, 2019.

3D laser scanning in conjunction with surface texturing to evaluate shift and reduction of the tibiofemoral contact area after meniscectomy.

Meniscectomy significantly change the kinematics of the knee joint by reducing the contact area between femoral condyles and the tibial plateau, but the shift in the contact area has been poorly described. The aim of our investigation was to measure the shift of the tibiofemoral contact area occurring after meniscectomy. We used laser scans combined to surface texturing for measuring the 3D position and area of the femoral and tibial surfaces involved in the joint. In particular, natural condyles (porcine model) were analysed and the reverse engineering approach was used for the interpretation of the results from compression tests and local force measurements in conjunction with staining techniques. The results suggested that laser scans combined to surface texturing may be considered as a powerful tool to investigate the stained contours of the contact area. Beside the largely documented reduction of contact area and local pressure increase, a shift of the centroid of the contact area toward the intercondylar notch was measured after meniscectomy. As a consequence of the contact area shift and pressure increase, cartilage degeneration close to the intercondylar notch may occur.

Comparative assessment of intrinsic mechanical stimuli on knee cartilage and compressed agarose constructs.

A well-established cue for improving the properties of tissue-engineered cartilage is mechanical stimulation. However, the explicit ranges of mechanical stimuli that correspond to favorable metabolic outcomes are elusive. Usually, these outcomes have only been associated with the applied strain and frequency, an oversimplification that can hide the fundamental relationship between the intrinsic mechanical stimuli and the metabolic outcomes. This highlights two important key issues: the firstly is related to the evaluation of the intrinsic mechanical stimuli of native cartilage; the second, assuming that the intrinsic mechanical stimuli will be important, deals with the ability to replicate them on the tissue-engineered constructs. This study quantifies and compares the volume of cartilage and agarose subjected to a given magnitude range of each intrinsic mechanical stimulus, through a numerical simulation of a patient-specific knee model coupled with experimental data of contact during the stance phase of gait, and agarose constructs under direct-dynamic compression. The results suggest that direct compression loading needs to be parameterized with time-dependence during the initial culture period in order to better reproduce each one of the intrinsic mechanical stimuli developed in the patient-specific cartilage. A loading regime which combines time periods of low compressive strain (5%) and frequency (0.5Hz), in order to approach the maximal principal strain and fluid velocity stimulus of the patient-specific cartilage, with time periods of high compressive strain (20%) and frequency (3Hz), in order to approach the pore pressure values, may be advantageous relatively to a single loading regime throughout the full culture period.

Obesity is associated with higher absolute tibiofemoral contact and muscle forces during gait with and without knee osteoarthritis.

BACKGROUND: Obesity is an important risk factor for knee osteoarthritis initiation and progression. However, it is unclear how obesity may directly affect the mechanical loading environment of the knee joint, initiating or progressing joint degeneration. The objective of this study was to investigate the interacting role of obesity and moderate knee osteoarthritis presence on tibiofemoral contact forces and muscle forces within the knee joint during walking gait. METHODS: Three-dimensional gait analysis was performed on 80 asymptomatic participants and 115 individuals diagnosed with moderate knee osteoarthritis. Each group was divided into three body mass index categories: healthy weight (body mass index<25), overweight (25≤body mass index≤30), and obese (body mass index>30). Tibiofemoral anterior-posterior shear and compressive forces, as well as quadriceps, hamstrings and gastrocnemius muscle forces, were estimated based on a sagittal plane contact force model. Peak contact and muscle forces during gait were compared between groups, as well as the interaction between disease presence and body mass index category, using a two-factor analysis of variance. FINDINGS: There were significant osteoarthritis effects in peak shear, gastrocnemius and quadriceps forces only when they were normalized to body mass, and there were significant BMI effects in peak shear, compression, gastrocnemius and hamstrings forces only in absolute, non-normalized forces. There was a significant interaction effect in peak quadriceps muscle forces, with higher forces in overweight and obese groups compared to asymptomatic healthy weight participants. INTERPRETATION: Body mass index was associated with higher absolute tibiofemoral compression and shear forces as well as posterior muscle forces during gait, regardless of moderate osteoarthritis presence or absence. The differences found may contribute to accelerated joint damage with obesity, but with the osteoarthritic knees less able to accommodate the high loads.