Prognostic value of the Walch classification for patients before and after shoulder arthroplasty performed for osteoarthritis with an intact rotator cuff.

BACKGROUND: The Walch classification is commonly used by surgeons when determining the treatment of osteoarthritis (OA). However, its utility in prognosticating patient clinical state before and after TSA remains unproven. We assessed the prognostic value of the modified Walch glenoid classification on preoperative clinical state and postoperative clinical and radiographic outcomes in total shoulder arthroplasty (TSA). METHODS: A prospectively collected, multicenter database for a single-platform TSA system was queried for patients with rotator cuff-intact OA and minimum 2 year follow-up after anatomic (aTSA) and reverse TSA (rTSA). Differences in patient-reported outcome scores (Simple Shoulder Test, American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form, Shoulder Pain and Disability Index, visual analog scale for pain, Shoulder Function score), combined patient-reported and clinical-input scores (Constant, University of California-Los Angeles shoulder score, Shoulder Arthroplasty Smart Score), active range of motion values (forward elevation [FE], abduction, external rotation [ER], internal rotation [IR], and radiographic outcomes (humeral and glenoid radiolucency line rates, scapula notching rate) were stratified and compared by glenoid deformity type per the Walch classification for aTSA and rTSA cohorts. Comparisons were performed to assess the ability of the Walch classification to predict the preoperative, postoperative, and improved state after TSA. RESULTS: 1008 TSAs were analyzed including 576 aTSA and 432 rTSA. Comparison of outcomes between Walch glenoid types resulted in 15 pairwise comparisons of 12 clinical outcome metrics, yielding 180 total Walch glenoid pairwise comparisons for each clinical state (preoperative, postoperative, improvement). Of the 180 possible pairwise Walch glenoid type and metric comparisons studied for aTSA and rTSA cohorts, <6% and <2% significantly differed in aTSA and rTSA cohorts, respectively. Significant differences based on Walch type were seen after adjustment for multiple pairwise comparisons in the aTSA cohort for FE and ER preoperatively, the Constant score postoperatively, and for abduction, FE, ER, Constant score, and SAS score for pre- to postoperative improvement. In the rTSA cohort, significant differences were only seen in abduction and Constant score both postoperatively and for pre- to postoperative improvement. There were no statistically significant differences in humeral lucency rate, glenoid lucency rate (aTSA), scapular notching rate (rTSA), complication rates, or revision rates between Walch glenoid types after TSA. CONCLUSION: Although useful for describing degenerative changes to the glenohumeral joint, we demonstrate a weak association between preoperative glenoid morphology according to the Walch classification and clinical state when evaluating patients undergoing TSA for rotator cuff-intact OA. Alternative glenoid classification systems or predictive models should be considered to provide more precise prognoses for patients undergoing TSA for rotator cuff-intact OA.

Anatomic total shoulder arthroplasty for posteriorly eccentric and concentric osteoarthritis: a comparison at minimum 5-year follow-up.

BACKGROUND: In patients with glenohumeral osteoarthritis and posteriorly eccentric wear patterns, the early to mid-term results of TSA using conservative glenoid reaming with no attempt at version correction have been favorable at early follow-up. The purpose of this study is to compare the clinical and radiographic outcomes of TSA using this technique for patients with and without eccentric wear patterns at a minimum 5-year follow-up. METHODS: Patients who underwent TSA with minimum 5-year follow-up were identified from an institutional registry. Preoperative and postoperative radiographs were used to determine humeroglenoid alignment (HGA-AP), humeroscapular alignment (HSA-AP), version, Walch classification and glenoid component seating. The outcome measures were the Simple Shoulder Test, glenoid component radiolucencies, and the occurrence of complications or revisions. RESULTS: Two hundred and ten patients were included in the study, of which 98 (47%) had posteriorly decentered humeral heads and 108 (51%) had centered humeral heads. There were 77 shoulders with Walch type A glenoids and 122 with Walch type B glenoids. At a mean 8-year follow-up, the final SST, change in SST and percentage of maximal improvement was not correlated with pre- and postoperative humeral head centering, Walch classification or glenoid version. There were no preoperative predictors of a low final SST. Two patients (1%) underwent open re-operations during the study period. In patients with Walch B1 and B2 glenoids (n=110), there were no differences in outcome measures between patients with postoperative retroversion of more and less than 15o. While 15 of 51 patients (29%) with minimum 5-year radiographs had glenoid radioluciences, these radiographic findings were not associated with inferior clinical outcomes. On multivariable analysis glenoid component radiolucencies were most strongly associated with incomplete component seating (OR 3.3, p = 0.082). CONCLUSION: The results of TSA with conservative glenoid reaming without attempt at version correction are favorable at minimum 5 year, mean 8-year follow-up. There were no differences in clinical and radiographic outcomes between patients with eccentric and concentric wear patterns. Incomplete glenoid component seating was the greatest predictor of glenoid component radiolucency, but these radiolucencies were not associated with inferior clinical outcomes.

Predictors of poor and excellent outcomes following reverse shoulder arthroplasty for glenohumeral osteoarthritis with an intact rotator cuff.

BACKGROUND: As the indications for reverse total shoulder arthroplasty (RSA) continue to evolve, it has been more commonly utilized for the treatment of glenohumeral osteoarthritis with an intact rotator cuff (GHOA). Given the increased use of RSA for GHOA, it is important to identify factors influential of clinical outcomes. In this study, we sought to identify variables predictive of clinical outcomes following RSA for GHOA. METHODS: Patients undergoing primary RSA for GHOA between 2015 and 2020 were retrospectively identified through a prospectively maintained, single surgeon registry. Eligible patients had complete patient-reported outcome measures and range of motion measurements with a minimum 2-year follow-up. Univariate analysis was utilized to compare characteristics and outcome measures of patients with poor and excellent outcomes, which was defined as postoperative American Shoulder and Elbow Surgeons (ASES) scores in the bottom and top quartiles, respectively. Multivariate linear regression was performed to determine factors independently predictive of postoperative ASES score. RESULTS: A total of 230 patients were included with a mean follow-up of 33.4 months (SD 13.2). The mean age of the study population was 71.9 (SD 6.1). Two hundred twenty-four patients (97.4%) surpassed the minimal clinically important difference and 209 patients (90.1%) achieved substantial clinical benefit for ASES score. Preoperative factors differing between the poor and excellent outcome groups were sex (male: poor 37.9%, excellent 58.6%; P = .041), opioid use (poor 24.1%, excellent 5.2%; P = .009), ASES score (poor 32.9, excellent 41.0; P = .011), and forward elevation (poor 92°, excellent 101°; P = .030). Linear regression demonstrated that Walch B3 glenoids (ß 7.08; P = .010) and higher preoperative ASES scores (ß 0.14; P = .025) were predictors of higher postoperative ASES score, while postoperative complications (ß -18.66; P < .001) and preoperative opioid use (ß -11.88; P < .001) were predictive of lower postoperative ASES scores. CONCLUSION: Over 90% of patients who underwent RSA for GHOA with an intact rotator cuff experienced substantial clinical benefit. An unsurprising handful of factors were associated with postoperative clinical outcomes; higher preoperative ASES scores were slightly associated with higher postoperative ASES, whereas preoperative opioid use and postoperative complications were associated with lower postoperative ASES. Additionally, Walch glenoid type B3 was associated with higher postoperative ASES, indicating that patients with posterior glenoid defects are not predisposed to poor clinical outcomes following RSA. These results serve as a resource to improve preoperative patient counseling and manage postoperative expectations.

Anatomic TSA for B2 glenoids treated with asymmetric reaming has equivalent survivorship and patient outcomes compared to type A glenoids at mean 9 years follow-up.

BACKGROUND: Walch B2 glenoids can present a challenge to shoulder arthroplasty surgeons. Short-term studies have demonstrated that corrective reaming to 10° of retroversion in anatomic total shoulder arthroplasty (aTSA) can result in good outcomes, however there is little data reporting the long-term outcomes in this cohort. B2 glenoids treated with high-side reaming present a theoretical risk of early glenoid component failure as one may ream into the subchondral bone. This study aimed to demonstrate that 1) B2 glenoids treated with corrective reaming have durable results and 2) offer similar results to Walch A1/2 in long-term follow-up. METHODS: Patients who underwent aTSA by a single surgeon (E.L.F.) were identified from a shoulder arthroplasty registry. Inclusion criteria included Walch A1, A2 or B2 glenoid, a diagnosis of primary shoulder osteoarthritis, and a minimum radiographic and clinical follow-up of 5 years. 43 patients with B2 glenoids were compared to a cohort of 42 patients with A1 or A2 glenoids. Preoperative computed tomography (CT) and radiographs were utilized to assess deformity, glenoid version, and posterior subluxation of the humeral head. Postoperatively, patients were assessed with radiographs and patient-reported outcome measures including American Shoulder and Elbow Surgeons (ASES) score, Simple Shoulder Test (SST) score, and Visual Analog Scale (VAS). RESULTS: 85 shoulders (82 patients, 42 B2 and 43 A1/A2 glenoids) with an average follow-up of 9.4 years were included. In the B2 cohort, the average retroversion was 21.1° and posterior subluxation was 69.4% compared with 10.6°(p<0.001) and 57.5% (p<0.001) in the A1 or A2 cohort. The cohort demographics were similar except for male sex (B2 69.8% vs A1 or A2 37.2%, p=0.008). There was no difference between the cohorts in their improvement in ASES (p=0.807), SST (p=0.586), or VAS (p=0.930) scores. There was no difference in lateral humeral offset (p=0.889) or acromial humeral interval (p=0.468) between initial postoperative and final follow-up visits. Survivorship for B2 glenoids was 97.6%, 94.1% and 73.3% at 5, 10 and 15 years, respectively compared to 97.6%, 91.9% and 83.5% in type A glenoids. The revision rate was similar between the two groups (p=0.432). Lazarus score (p=0.682) and rates of humeral radiolucency (p=0.366) and humeral osteolysis (p=0.194) were similar between the two cohorts at final follow-up. CONCLUSION: Asymmetric reaming of patients with B2 glenoids is a reliable method of glenoid preparation with excellent mid- to long-term clinical results, patient reported outcomes, and low revision rates similar to their A1 and A2 counterparts.

Anatomic shoulder arthroplasty in Walch type C glenoid deformity: mid- to long-term outcomes.

BACKGROUND: Hypoplastic glenoid morphology in the setting of glenohumeral osteoarthritis is a rare yet complex surgical problem. Treatment of this patient population with anatomic total shoulder arthroplasty (aTSA) remains controversial. Furthermore, there is no gold-standard approach, with limited guidance for surgeons on the need for glenoid version correction in the setting of a dysplastic glenoid. The purpose of this study was to evaluate mid- to long-term outcomes and reoperation rates of aTSA for the treatment of primary glenohumeral osteoarthritis with Walch type C glenoid deformity. METHODS: This observational, retrospective cohort study identified patients with a Walch type C glenoid who underwent aTSA at 2 institutions between 2007 and 2016. Patients were contacted to complete updated patient-reported outcome measures at a minimum of 5.5 years postoperatively. The outcome measures collected included the American Shoulder and Elbow Surgeons (ASES) score and Single Assessment Numeric Evaluation (SANE) score. Secondary outcomes included any additional surgical procedures on the operative shoulder, patient satisfaction, and willingness to undergo aTSA again. RESULTS: In total, 30 patients met the inclusion criteria, of whom 26 (86.7%) were able to be contacted to undergo final outcome evaluations. The mean age at the time of surgery was 61.3 years (range, 40.9-75.5 years), and 20 patients (76.9%) were men. The mean follow-up period was 8.5 years (range, 5.5-11.3 years) after surgery. Treatment was performed with an augmented component in 9 patients and with a standard component in 17. Of the 17 patients with non-augmented components, 9 underwent partial correction with asymmetrical reaming, 3 received a mini-inset glenoid component, and 2 had an anteriorly offset humeral component. At final follow-up, patients had a mean ASES score of 83.6 ± 16.7, ASES pain score of 24.7 ± 20.8, SANE score of 80.4 ± 20.9, and patient satisfaction rate of 84.1%. No statistically significant differences in any outcome measure were observed between patients with augmented glenoid components and those with non-augmented glenoid components. One revision to reverse shoulder arthroplasty was performed for instability at 7 years postoperatively after a traumatic dislocation. All patients reported that they would be willing to undergo the same surgical procedure again. DISCUSSION: Despite variance in glenoid reconstructive approach, aTSA provides satisfactory and sustained improvements in patient-reported outcomes in patients with glenoid dysplasia and primary glenohumeral osteoarthritis with a low revision rate at a mean of 8.5 years. Anatomic shoulder arthroplasty should remain a surgical option in patients with Walch type C glenoid deformity.

Anatomic and reverse shoulder arthroplasty for management of type B2 and B3 glenoids: a matched-cohort analysis.

BACKGROUND: Severe glenohumeral osteoarthritis (GHOA) with posterior glenoid erosion remains challenging to address for shoulder surgeons. Whereas anatomic total shoulder arthroplasty (TSA) has historically been the treatment of choice, reverse shoulder arthroplasty (RSA) offers an alternative option. Limited evidence exists directly comparing these 2 treatments in a similar patient population. The purpose of this study was to compare the clinical outcomes of patients with GHOA and Walch type B2 and B3 glenoid morphologies treated with TSA vs. RSA. METHODS: We performed a multicenter retrospective cohort study of patients with GHOA who were treated with primary shoulder arthroplasty and had a minimum follow-up period of 2 years. Preoperative computed tomography was used to determine type B2 and B3 glenoid morphology as described by the modified Walch classification. Three-dimensional perioperative planning software was used to characterize glenoid retroversion and humeral subluxation. Patients were categorized based on type of arthroplasty (TSA or RSA) and were matched 1:1 by sex, Walch classification, and age. Patient-reported outcome measures, active range of motion, presence and severity of glenoid loosening, and complications were compared. The percentage of patients who reached previously established clinically significant thresholds of the minimal clinically important difference and substantial clinical benefit for the American Shoulder and Elbow Surgeons score was also comparatively assessed. RESULTS: In total, 202 patients (101 per group) with GHOA and type B2 or B3 glenoids were included in the 1:1 matched analysis. The mean length of follow-up (± standard deviation) was 39 ± 18.7 months. The cohorts were well matched, with no differences in sex, age, American Society of Anesthesiologists score, body mass index, preoperative glenoid morphology (Walch classification), glenoid retroversion, or posterior subluxation (P > .05). RSA was associated with a lower postoperative visual analog scale pain score (0.5 in RSA group vs. 1.2 in TSA group, P = .036); however, no other no other significant differences in patient-reported significant differences in patient-reported outcome measures were found. Most patients in both groups (95.0% in TSA group vs. 98.0% in RSA group, P = .436) reached the minimal clinically important difference, and 82% of TSA patients and 90% of RSA patients reached the substantial clinical benefit value (P = .292). No significant differences in the overall complication rate (P = .781) and active range of motion were found, with the exception of internal rotation (scored on a numeric scale) being worse in the RSA group (2.7 preoperatively and 5.2 postoperatively in RSA group vs. 3.9 and 6.5, respectively, in TSA group; P < .001). Baseplate loosening occurred in 2 RSA cases, and 29 TSA cases had glenoid radiolucencies (P < .001), with 3 grossly loose glenoid components. CONCLUSION: Primary RSA results in short-term outcomes largely comparable to those of TSA in patients with Walch type B2 or B3 glenoid morphology. Both TSA and RSA provide substantial clinical benefit to patients with significant posterior glenoid wear.

Total shoulder arthroplasty in patients with a B2 glenoid addressed with corrective reaming: mean 8-year follow-up.

BACKGROUND: The management of Walch B2 glenoid deformities in primary glenohumeral osteoarthritis is frequently debated. Previous literature has shown that the treatment of B2 glenoids with high-side reaming and anatomic total shoulder arthroplasty (aTSA) perform well in the short-term but is associated with an increased glenoid component failure rate in severe deformities. Therefore, many have explored alternative options, including augmented anatomic glenoid components and reverse shoulder arthroplasty. Our goal in this study is to provide mid-term radiographic and clinical outcomes after high-side reaming and aTSA for B2 glenoids. METHODS: Patients were followed both clinically and radiographically. Preoperative computed tomography scans were used for retrospective analysis of deformity. Both preoperative and postoperative visual analog scale pain, American Shoulder and Elbow Surgeons score, and Simple Shoulder Test scores were collected. Radiographs were analyzed preoperatively and postoperatively for humeral head decentering relative to the glenoid vault, immediate glenoid seating, and final glenoid peg radiolucency. RESULTS: Of the original cohort of 59 patients (6 now deceased) reported at a mean radiographic follow-up of 3.4 years, 34 shoulders in 33 patients with B2 glenoids (mean retroversion 18.9°, range 4°-32°) were available for follow-up at a mean of 8.6 years (range 5.5-11.2) after high-side glenoid reaming with aTSA. Three (5.1%) of the original 59 shoulder were revised. At final follow-up, 3 of 30 (10.0%) shoulders had radiographic glenoid component failure, but were unrevised. Glenoid component failure was associated with worse initial glenoid component seating (mean Lazarus score 1.2 vs. 2.0, P = .002). Glenoid failure was also associated with increased posterior humeral head subluxation at 2-4 year follow-up (mean 5.6% vs. 12.6%, P = .045) and at final follow-up (mean 7.0% vs. 21%, P = .002). There was no association between glenoid component failure and preoperative retroversion, inclination, or humeral head subluxation (all P > .05). Glenoid component failure was associated with worse American Shoulder and Elbow Surgeons (88 vs. 73) and visual analog scale pain (0.8 vs. 2.1) scores (both P = .03). CONCLUSIONS: At a mean of 8.6 years, 88% of shoulders available for follow-up had well-fixed glenoid components. Glenoid component failure was associated with poor initial glenoid component seating, with failed components having an average of 25% of the glenoid component not seated. Preoperative deformity such as glenoid retroversion, inclination, or humeral head subluxation did not predict glenoid component failure. This study supports that initial glenoid component seating and recurrence of posterior humeral head subluxation may be the most important factors for mid-term glenoid component survival in aTSA in patients with B2 glenoids.

Short-term clinical and radiographic outcomes of a hybrid all-polyethylene glenoid based on preoperative glenoid morphology.

BACKGROUND: The primary purpose of this study was to compare 2-year anatomic total shoulder arthroplasty (TSA) functional and radiographic outcomes between Walch type A and B glenoids treated with an all-polyethylene glenoid designed for hybrid fixation with peripheral cement and central osseous integration. The secondary purpose was to evaluate outcomes based on central peg technique. The hypotheses were that there would be no difference in short-term radiographic or functional outcome scores based on preoperative glenoid morphology or central peg technique. METHODS: We performed a multicenter retrospective review of patients who underwent TSA with the same hybrid all-polyethylene glenoid and had minimum 2-year follow-up. Patient-reported outcomes and radiographic outcomes were analyzed based on preoperative Walch morphology and central peg technique. Radiographic analysis included preoperative glenoid morphology; preoperative and postoperative glenoid version, glenoid inclination, and posterior humeral head subluxation; and postoperative glenoid radiolucencies according to the Wirth and Lazarus classifications. RESULTS: A total of 266 patients with a mean age of 64.9 ± 8.2 years were evaluated at a mean of 28 months postoperatively. Postoperatively, there were significant improvements in all functional outcome measures (P < .001), range-of-motion measures (forward elevation, external rotation at 0°, external rotation at 90°, internal rotation by spinal level, and internal rotation at 90°; P < .001), and strength measures (Constant, external rotation, and modified belly press; P < .001). There were no clinically meaningful differences in functional outcomes or statistically significant differences in radiographic appearance between Walch type A and B glenoids. Subgroup analysis revealed that glenoids with a cemented central peg had the worst radiographic outcomes based on Lazarus scoring. CONCLUSION: Patients undergoing TSA with a hybrid in-line pegged glenoid have excellent clinical outcomes at short-term follow-up regardless of preoperative glenoid morphology. Different central peg techniques do not appear to play a significant role in the risk of glenoid component lucencies at 2 years postoperatively.

Mid- to long-term outcomes of augmented and nonaugmented anatomic shoulder arthroplasty in Walch B3 glenoids.

BACKGROUND: In cases of severe osteoarthritis, posterior glenoid wear leads to acquired retroversion of the glenoid. Surgical treatment of glenoids with acquired retroversion and posterior humeral subluxation with anatomic total shoulder arthroplasty (aTSA) is controversial. The purpose of this study was to determine mid- to long-term outcomes and reoperation rates of augmented and nonaugmented aTSA for treatment of glenohumeral osteoarthritis with Walch B3 glenoid deformity. METHODS: This observational cohort study reviewed patients with a Walch B3 glenoid undergoing aTSA at a single institution between 2007 and 2014. Patients were contacted to complete updated patient-reported outcome measures at a minimum of 6 years postoperatively. Outcome measures collected included the American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form (ASES) score and Single Alpha Numeric Evaluation (SANE) score. Secondary outcomes included any additional surgery on the operative shoulder, patient satisfaction, and willingness to undergo aTSA again. RESULTS: Thirty-nine patients met inclusion criteria, and thirty-five (89.7%) were able to be contacted for final outcomes evaluation. Mean follow-up was 8.7 years (range 6-13) after surgery. Sixteen patients were treated with an augmented glenoid component, and 19 patients were treated with a standard glenoid component. Of those with standard components, all were partially corrected with asymmetric reaming. At final follow-up, there were no statistically significant differences between those with augmented and standard glenoid components for mean ASES score (93.3 vs. 85.7, P = .217), ASES pain score (47.2 vs. 41.6, P = .161), SANE score (87.8 vs. 86.0, P = .692), and percentage patient satisfaction (95.6% vs. 96.8%, P = .735), forward elevation (148° vs. 149°, P = .852), or external rotation (36° vs. 39°, P = .202). No patient in either group had undergone revision surgery of the operative shoulder over the study period and all patients stated that they would undergo the same surgery again. DISCUSSION: Both augmented and standard aTSA can provide satisfactory and sustained improvements in patient-reported outcomes in patients with acquired glenoid retroversion due to glenohumeral osteoarthritis. Despite a trend toward alternative treatment options, anatomic shoulder arthroplasty should remain a surgical consideration even in the setting of a Walch B3 glenoid deformity.

Total shoulder arthroplasty using an inlay glenoid component for glenoid deficiency: mid- to long-term follow-up of a previously published cohort.

BACKGROUND: The short-term results of total shoulder arthroplasty with an inlay glenoid component performed by a single surgeon in patients with glenoid bone loss have previously been reported. The purpose of this study was to investigate the mid- to long-term clinical and radiographic outcomes of these patients. METHODS: We identified a cohort of patients who underwent total shoulder arthroplasty with an inlay glenoid component performed by a single surgeon between 2010 and 2019 for severe glenoid dysplasia and/or glenoid bone loss. Patients with a minimum of 2 years' follow-up were evaluated regarding preoperative and postoperative range of motion, radiographic findings, visual analog scale pain scores, and Single Assessment Numeric Evaluation scores. RESULTS: Overall, 39 shoulders in 33 patients were treated with an inlay glenoid component for severe glenoid bone loss. Four patients were lost to follow-up, and 1 patient died with a well-functioning implant in place. The final cohort included 34 shoulders in 28 patients (46.4% female patients [13 of 28] and 53.6% male patients [15 of 28]) with a mean age of 66.9 years (range, 58-81 years) and mean follow-up period of 68.3 months. Of the 34 cases, 5 were revision cases. One patient died following 2-year follow-up. Of the shoulders, 10 were classified as Walch type A2, 4 were classified as Walch type B3, and 15 were classified as Walch type C; 5 shoulders were unable to be classified. We observed statistically significant increases in range of motion (forward elevation, 38.1° [P < .001]; external rotation, 18.8° [P < .001]) and improvement in the Single Assessment Numeric Evaluation score (from 26.6 to 81.0, P < .001). Two patients underwent conversion to reverse shoulder arthroplasty at 2.2 and 1.7 years postoperatively. CONCLUSION: Inlay glenoid components provide a low rate of revision and improved clinical and functional outcomes at mid- to long-term follow-up.

Standard radiological classification of glenohumeral osteoarthritis does not correlate with the complexity of the arthritic glenoid deformity.

BACKGROUND: The Samilson-Prieto classification (SPC) depending on the humeral osteophyte length on a-pX-rays today is widely used to classify glenohumeral osteoarthritis in general. For treatment planning and prognosis, the patho-morphology of the glenoid and static posterior subluxation of the humeral head classified according to Walch is of much higher importance. Here, usually a CT or MRI scan is required for a correct classification. A possible correlation between both classifications is poorly explored. Without it, the complexity of the case might be mis-interpreted using the SPC. The aim of this study was to investigate such a correlation, i.e. whether it correlates with the glenoid deformity and degree of humeral head subluxation. PATIENTS AND METHODS: Radiological datasets (X-ray and CT or MRI) of 352 patients with primary OA of the shoulder were evaluated by two observers experienced in shoulder surgery. For the Samilson-Prieto classification, true a-p shoulder radiographs and for the modified Walch classification CT or MRI scans in the axial plane were interpreted using a validated method. To investigate a correlation between both classifications, the Fisher's exact test was used. For the interobserver reliability, the weighted kappa coefficient κ was determined. RESULTS: For the Walch classification, both observers found a similar percentage for the different types, with decreasing numbers from normal (type A1) to severely altered glenoids In the Samilson-Prieto classification, OA grade I was predominant, while grade II and III showed a relatively equal distribution. Interobserver reliability was high both for the Walch classification with a κ 0.923 (95% confidence interval 0.892; 0.954) and) for the SPC with a κ 0.88 (95% confidence interval 0.843; 0.916). A correlation between the two classifications in Fischer's exact test could not be shown (p = 0.584). DISCUSSION: Since there is no correlation between both, using the Samilson-Prieto classification alone might miss relevant prognostic factors in gleno-humeral OA. Adequate imaging of the glenoid morphology also in the axial plane is absolutely mandatory to understand the complexity and chose the right treatment for each patient. LEVEL OF EVIDENCE: Study of Diagnostic Test-Level II.

Three-dimensional computed tomography analysis of pathologic correction in total shoulder arthroplasty based on severity of preoperative pathology.

BACKGROUND: The purpose of this study was to quantify correction of glenoid deformity and humeral head alignment in anatomic total shoulder arthroplasty as a function of preoperative pathology (modified Walch classification) and glenoid implant type in a clinical cohort using 3-dimensional computed tomography (CT) analysis. METHODS: Patients undergoing anatomic total shoulder arthroplasty with a standard glenoid (SG) (n = 110) or posteriorly stepped augmented glenoid (AG) (n = 62) component were evaluated with a preoperative CT scan and a postoperative CT scan within 3 months of surgery. Glenoid version, inclination, and medial-lateral (ML) joint line position, as well as humeral head alignment, were assessed on both CT scans, with preoperative-to-postoperative changes analyzed relative to pathology and premorbid anatomy based on the modified Walch classification and glenoid implant type. RESULTS: On average, correction to the premorbid ML joint line position was significantly less in type A2 glenoids than in type A1 glenoids (-2.3 ± 2.1 mm vs. 1.1 ± 0.9 mm, P < .001). Correction to premorbid version was not different between type B2 glenoids with AG components and type A1 glenoids with SG components (-1.7° ± 6.6° vs. -1.0° ± 4.0°, P = .57), and the premorbid ML joint line position was restored on average in both groups (0.3 ± 1.6 mm vs. 1.1 ± 0.9 mm, P = .006). Correction to premorbid version was not different between type B3 glenoids with AG components and type A1 glenoids with SG components (-0.6° ± 5.1° vs. -1.0° ± 4.0°, P = .72), but correction relative to the premorbid ML joint line position was significantly less in type B3 glenoids with AG components than in type A1 glenoids with SG components (-2.2 ± 2.1 mm vs. 1.1 ± 0.9 mm, P < .001). Postoperative humeral glenoid alignment was not different in any group comparisons. DISCUSSION: In cases with posterior glenoid bone loss and retroversion (type B2 or B3 glenoids), an AG component can better correct retroversion and the glenoid ML joint line position compared with an SG component, with correction to premorbid version comparable to a type A1 glenoid with an SG component. However, restoration of the premorbid ML joint line position may not always be possible with SG or AG components in cases with more advanced central glenoid bone loss (type A2 or B3 glenoids). Further follow-up is needed to determine the clinical consequences of these findings.

Early to midterm outcomes of anatomic shoulder arthroplasty performed on dysplastic glenoids.

BACKGROUND: Treatment of primary osteoarthritis with glenoid dysplasia or Walch type C glenoids remains controversial. There is scant literature available on patient outcomes after anatomic shoulder arthroplasty in patients with Walch type C glenoids. The purpose of this study was to evaluate the outcomes of total shoulder arthroplasty (TSA) for Walch type C dysplastic glenoids with standard (nonaugmented) glenoid components compared with TSA for glenoids with concentric wear and minimal erosion (Walch type A1). We hypothesized that TSA performed for Walch type C dysplastic glenoids with standard glenoid components can reliably produce successful results at short- to midterm follow-up. METHODS: We identified all patients who had primary anatomic TSA performed for osteoarthritis in a prospective shoulder arthroplasty registry collected from 2004 to the present time. Twenty-nine patients met inclusion criteria of a preoperative Walch type C dysplastic glenoid, treatment with TSA using standard (nonaugmented) glenoid components, and a minimum of 2-year clinical follow-up. A matched cohort of 58 patients with a type A1 glenoid and minimum of 2-year clinical follow-up for anatomic shoulder arthroplasty served as the control group. The American Shoulder and Elbow Surgeons (ASES) score, the Single Assessment Numeric Evaluation (SANE), patient satisfaction, complications, and revisions were evaluated in both cohorts. RESULTS: The mean follow-up for this study was 4.5 years (standard deviation, 2.6 years; range, 2-10 years). Baseline measures were not significantly different between the Walch type C dysplastic group and the matched type A1 cohort (all P > .05). Both groups showed significant improvements in ASES, ASES pain, and SANE scores from baseline to the final follow-up (all P < .001). The Walch type C group had no significant differences in ASES score (P = .118), ASES pain (P = .730), or SANE score (P = .168) compared with the matched type A1 cohort. The complication rate of patients with a type C glenoid was 14% (4 of 29) with a 7% (2 of 29) revision rate. Similarly, the complication rate for the A1 matched cohort was 17% (10 of 58) with a 12% (7 of 58) revision rate. Both groups had high patient satisfaction without statistical differences (P = .549). In addition, there were no differences in the rate of radiographic lucencies or Lazarus scores (P = .222). CONCLUSIONS: Anatomic TSA reliably produced clinically significant improvements in pain and function and similar short- to midterm outcomes in patients with Walch type C dysplastic glenoids compared with patients with type A1 glenoids. Anatomic TSA with standard (nonaugmented) glenoid components should remain an option in patients with Walch type C dysplastic glenoids despite emerging treatment options including augmented glenoid components and reverse TSA.

Natural history of glenoid bone loss in primary glenohumeral osteoarthritis: how does bone loss progress over a decade?

INTRODUCTION: Progressive glenoid bone loss and humeral head subluxation occur in primary glenohumeral osteoarthritis (GHOA), but less is known about the rate and pattern by which this occurs. The purpose of this study was to determine how glenohumeral subluxation and glenoid bone loss changed over time in shoulders that underwent arthroplasty and had been evaluated with radiographs at 1 or more time points over the 5-15 years before arthroplasty. METHODS: We retrospectively identified 48 shoulders that had been evaluated with high-quality radiographs both before arthroplasty and at least once 5-15 years earlier. Axillary radiographs were used to classify glenoid morphology using the modified Walch classification on the oldest, most recent, and all intervening radiographs. The mean interval time between the oldest and most recent radiographs was 8.9 years (range 5-15 years). Nineteen patients had a single intervening radiograph (mean, 6.7 years from most recent radiograph; range 4.4-8.9 years), 6 patients had 2 (mean, 5.6 years; range 0.2-13.9 years), 3 had 3 (mean, 5 years; range 2.4-8.3 years), 2 had 5 (mean, 3.4 years; range 1.1-5.7 years), and 1 had 6 (0.5 years). RESULTS: Glenoid morphology on the earliest radiograph was classified as A1 in 22, A2 in 13, B1 in 1, B2 in 9, B3 in 1, and D in 2 shoulders. Walch A patterns identified on early radiographs most commonly maintained an A pattern over time, but 20% developed eccentric wear with 5 of 35 becoming B type and 2 of 35 becoming a D type before arthroplasty. All B-type glenoids remained B type. Classic progression of bone loss along the same concentric or eccentric "track" occurred 41% of the time, with 9 of 22 A1 glenoids becoming A2 glenoids, the only B1 glenoid becoming a B2 glenoid, and 56% (5/9) of B2 glenoids becoming B3 glenoids before arthroplasty. Only 15% (2/13) of A2 glenoids developed eccentric wear compared with 32% (7/22) of A1 glenoids. CONCLUSION: In primary GHOA, humeral head subluxation and glenoid bone loss do progress over time, but not universally and not always through the same pathway. Shoulders presenting with posterior subluxation (B types) remained posteriorly subluxed. Shoulders presenting with concentric arthritis developed an eccentric pattern 20% of the time. For concentric arthritis, progression of bone loss from A1 to A2 occurred 41% of the time. For eccentric arthritis, progression of bone loss from B2 to B3 occurred 56% of the time.

Reliability of the modified Walch classification for advanced glenohumeral osteoarthritis using 3-dimensional computed tomography analysis: a study of the ASES B2 Glenoid Multicenter Research Group.

BACKGROUND: Variations in glenoid morphology affect surgical treatment and outcome of advanced glenohumeral osteoarthritis (OA). The purpose of this study was to assess the inter- and intraobserver reliability of the modified Walch classification using 3-dimensional (3D) computed tomography (CT) imaging in a multicenter research group. METHODS: Deidentified preoperative CTs of patients with primary glenohumeral OA undergoing anatomic or reverse total shoulder arthroplasty (TSA) were reviewed with 3D imaging software by 23 experienced shoulder surgeons across 19 institutions. CTs were separated into 2 groups for review: group 1 (96 cases involving all modified Walch classification categories evaluated by 12 readers) and group 2 (98 cases involving posterior glenoid deformity categories [B2, B3, C1, C2] evaluated by 11 readers other than the first 12). Each case group was reviewed by the same set of readers 4 different times (with and without the glenoid vault model present), blindly and in random order. Inter- and intraobserver reliabilities were calculated to assess agreement (slight, fair, moderate, substantial, almost perfect) within groups and by modified Walch classification categories. RESULTS: Interobserver reliability showed fair to moderate agreement for both groups. Group 1 had a kappa of 0.43 (95% confidence interval [CI]: 0.38, 0.48) with the glenoid vault model absent and 0.41 (95% CI: 0.37, 0.46) with it present. Group 2 had a kappa of 0.38 (95% CI: 0.33, 0.43) with the glenoid vault model absent and 0.37 (95% CI: 0.32, 0.43) with it present. Intraobserver reliability showed substantial agreement for group 1 with (0.63, range 0.47-0.71) and without (0.61, range 0.52-0.69) the glenoid vault model present. For group 2, intraobserver reliability showed moderate agreement with the glenoid vault model absent (0.51, range 0.30-0.72), which improved to substantial agreement with the glenoid vault model present (0.61, range 0.34-0.87). DISCUSSION: Inter- and intraobserver reliability of the modified Walch classification were fair to moderate and moderate to substantial, respectively, using standardized 3D CT imaging analysis in a large multicenter study. The findings potentially suggest that cases with a spectrum of posterior glenoid bone loss and/or dysplasia can be harder to distinguish by modified Walch type because of a lack of defined thresholds, and the glenoid vault model may be beneficial in determining Walch type in certain scenarios. The ability to reproducibly separate patients into groups based on preoperative pathology, including Walch type, is important for future studies to accurately evaluate postoperative outcomes in TSA patient cohorts.

Single Assessment Numeric Evaluation for instability as an alternative to the Rowe score.

BACKGROUND: Several functional outcome scores have been proposed for the evaluation of shoulder instability. Most are multiple-item questionnaires, which can be time-consuming and difficult for patients to understand, as well as leading to lack of compliance. The Single Assessment Numeric Evaluation (SANE) score is a single question that has recently gained widespread acceptance based on its simplicity and correlation with more complex scoring systems. The purpose of this study was to assess the correlation of a new modified version of the SANE score, the SANE-instability score, with the Rowe score after treatment for shoulder instability. MATERIALS AND METHODS: We prospectively evaluated a consecutive series of 253 patients (268 shoulders) treated surgically or nonoperatively for shoulder instability between November 2017 and November 2019, for whom the Rowe and SANE-instability scores were collected before treatment and/or after treatment. The SANE-instability score was assessed with the following question: "What is the overall percent value of your shoulder if a completely stable shoulder represents 100%?" Correlations were tested using the Pearson coefficient (r) and interpreted as very high (r = 0.90-1.00), high (r = 0.70-0.89), moderate (r = 0.50-0.69), low (r = 0.30-0.49), or negligible (r = 0.00-0.29). Subgroup analyses were also performed to observe correlation variations according to follow-up length (before treatment and at 6, 12, 26, 52, and 104 weeks after treatment), patient age (<20, 20-29, 30-39, or ≥40 years), and type of treatment (nonoperative or surgical). RESULTS: The overall correlation between the SANE-instability and Rowe scores was high (r = 0.85, P < .001). Subgroup analyses revealed that the correlation between the 2 scores was high before treatment (r = 0.74); moderate at 6 and 12 weeks after treatment (r = 0.66 and r = 0.57, respectively); and then high at 26, 52, and 104 weeks after treatment (r = 0.75, r = 0.75, and r = 0.78, respectively) (P < .001). The correlation was high across all types of treatment (r = 0.76-0.85), high for patients aged ≥ 20 years (r = 0.80-0.86), and very high for patients aged < 20 years (r = 0.93) (P < .001). CONCLUSION: This study demonstrated a significant correlation between the SANE-instability and Rowe scores before and after treatment, as well as across all patient age groups and treatments. Owing to its high simplicity, the SANE-instability score could be used as an alternative to the Rowe score for patient follow-up at various time points.

Clinical and radiographic outcomes with a posteriorly augmented glenoid for Walch B glenoids in anatomic total shoulder arthroplasty.

BACKGROUND: Osteoarthritis of the glenohumeral joint is often associated with posterior glenoid wear. The purpose of this study was to determine the clinical and radiographic outcomes of a posteriorly augmented glenoid in patients who have a Walch B glenoid deformity when treated with anatomic total shoulder arthroplasty (aTSA). METHODS: At total of 68 primary aTSA patients with osteoarthritis and a Walch B glenoid deformity were treated with an 8° posteriorly augmented glenoid. All patients were evaluated and underwent scoring preoperatively and at latest follow-up with 5 clinical outcome scoring metrics; active range of motion (ROM) was also measured. The mean follow-up period was 50 months, with a 2-year minimum follow-up period. RESULTS: All patients experienced significant improvements in pain and function following aTSA with a posteriorly augmented glenoid, and 90% of patients exceeded the minimal clinically important difference threshold for the clinical outcome metric scores and ROM measures. Two-thirds of patients exceeded the substantial clinical benefit threshold for the clinical outcome metrics and ROM. Preoperatively, the humeral head was posteriorly subluxated an average of 73% for each Walch B glenoid type, and at latest follow-up, all humeral heads were re-centered on the posteriorly augmented glenoid. Two patients with augmented glenoids who had Walch B2 glenoids underwent revision for aseptic glenoid loosening. DISCUSSION: Anatomic total shoulder arthroplasty patients with Walch B glenoids receiving an 8° posteriorly augmented wedge glenoid experienced excellent clinical and radiographic outcomes with a patient satisfaction rate greater than 97% and a low complication rate at a mean follow-up of 50 months. Humeral head centering was maintained for each type of Walch B glenoid.

Three-dimensional geometry of the normal shoulder: a software analysis.

BACKGROUND: Three-dimensional (3D) geometry of the normal glenohumeral bone anatomy and relations is poorly documented. Our aims were (1) to determine the 3D geometry of the normal glenohumeral joint (GHJ) with reference to the scapular body plane and (2) to identify spatial correlations between the orientation and direction of the humeral head and the glenoid. METHODS: Computed tomographies (CTs) of the normal, noninjured GHJ were collected from patients who had undergone CTs in the setting of (1) polytrauma, (2) traumatic head injury, (3) chronic acromioclavicular joint dislocations, and (4) unilateral trauma with a contralateral normal shoulder. We performed 3D segmentation and measurements with a fully automatic software (Glenosys; Imascap). Measurements were made in reference to the scapular body plane and its transverse axis. Geometric measurements included version, inclination, direction, orientation, best-fit sphere radius (BFSR), humeral subluxation, critical shoulder angle, reverse shoulder angle, glenoid area, and glenohumeral distance. Statistical correlations were sought between glenoid and humeral 3D measurements (Pearson correlation). RESULTS: A total of 122 normal GHJs (64 men, 58 women, age: 52 ± 17 years) were studied. The glenoid BFSR was always larger than the humerus BFSR (constant factor of 1.5, standard deviation = 0.2). The mean glenoid version and inclination were -6° ± 4° and 7° ± 5°, respectively. Men and women were found to have significantly different values for inclination (6° vs. 9°, P = .02), but not for version. Humeral subluxation was 59% ± 7%, with a linear correlation with glenoid retroversion (r = -0.70, P < .001) regardless of age. There was a significant and linear correlation between glenoid and humeral orientation and direction (r = 0.72 and r = 0.70, P < .001). CONCLUSION: The 3D geometry of the glenoid and humeral head present distinct limits in normal shoulders that can be set as references in daily practice: version and inclination are -6° and 7°, respectively, and humeral posterior subluxation is 59%; interindividual variations, regardless of the size, are relative to the scapular plane. There exists a strong correlation between the position of the humeral head and the glenoid orientation and direction.

Outcomes of anatomic shoulder arthroplasty performed on B2 vs. A1 type glenoids.

BACKGROUND: Glenoid component malpositioning and glenoid component retroversion have been associated with higher rates of radiolucencies, raising concerns about its implications on glenoid loosening and ultimate failure of anatomic total shoulder arthroplasty (TSA). Although there is literature regarding the relative advantages of techniques to address posterior glenoid bone loss, we are not aware of studies comparing outcomes of TSA on these challenging Walch type B2 glenoids vs. more common A1 glenoids. The purpose of this study is to compare outcomes of TSA performed on A1 glenoids and B2 glenoids treated with asymmetric glenoid reaming. METHODS: We identified 1045 shoulders that had primary TSAs performed for osteoarthritis in a prospective shoulder arthroplasty registry. Two hundred eighty-nine shoulders met inclusion criteria of a preoperative Walch type A1 (178) or B2 (111) glenoid morphology, treatment with TSA, asymmetric reaming in the B2 group, and a minimum of 2-year clinical and radiographic follow-up. Postoperative radiographs were assessed for lucencies, and patient-reported outcome measures were collected at all follow-up visits. RESULTS: Follow-up averaged 40 ± 15 months for all patients, and more men presented with a B2 glenoid (80 of 111; 72%) compared with A1 (101 of 178; 57%) (P = .009). Age at surgery (P = .166), dominant-sided surgery (P = .281), body mass index (P = .501), smoking (P = .155), preoperative opioid use (P = .154), and diabetes (P = .331) were not significantly different between groups. Both groups had similar Constant Strength scores preoperatively (A1: 4.7 ± 7.1, and B2: 4.3 ± 7.3) but the B2 group improved significantly more at final follow-up (A1: 10.3 ± 6.2 vs. B2: 12.7 ± 6.7, P = .005). The Total Constant score was also significantly better at follow-up in the B2 glenoid group (P = .039). All other Constant subscales, American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form (ASES), and Single Assessment Numerical Evaluation (SANE) measures showed significant improvement preoperatively to final follow-up (all P <.001) but there were no significant differences between the A1 and B2 glenoid groups (all P > .05). A similar proportion of patients rated their satisfaction as either very satisfied or satisfied between the A1 (160; 90%) and B2 (100; 90%) (P = .613). Lazarus scores were also similar between the A1 and B2 groups (P = .952) as were the rates of humeral radiolucent lines (P = .749) and humeral osteolysis (P = .507). CONCLUSIONS: Although patients with B2 glenoids may present a more technically challenging anatomic total shoulder arthroplasty, treatment with concurrent asymmetric glenoid reaming produced similar, successful clinical and radiographic early to midterm outcomes for patients undergoing TSA compared with A1 glenoids. Additional follow-up on this cohort will be important to confirm the durability of these early results.

Multilevel glenoid morphology and retroversion assessment in Walch B2 and B3 types.

OBJECTIVE: A major factor that impacts the long-term outcome and complication rates of total shoulder arthroplasty is the preoperative posterior glenoid bone loss quantified by glenoid retroversion. The purpose of this study was to assess if glenoid retroversion varies significantly at different glenoid heights in Walch B2 and B3 glenoids. MATERIALS AND METHODS: Patients with B2 and B3 glenoid types were included following retrospective review of 386 consecutive CT shoulder studies performed for arthroplasty preoperative planning. True axial CT reconstructions were created using a validated technique. Two readers independently measured the glenoid retroversion angles according to the Friedman method using the "intermediate" glenoid at three glenoid heights: 75% (upper), 50% (equator), and 25% (lower). The variances between the three levels for a given patient were calculated. RESULTS: Twenty-nine B2 and 8 B3 glenoid types were included. There was no significant difference in variance of glenoid version among the three levels in B2 or B3 groups. The mean variance in retroversion degree between equator-lower, upper-equator, and upper-lower glenoid was - 0.4, 0.3, and - 0.2 for B2; and - 0.2, 1.9, and 1.9 for B3 glenoid, respectively. The level of inter-reader agreement was fair to good for variance at equator-lower, and good to excellent for upper-equator and upper-lower glenoid. CONCLUSIONS: Glenoid version can be accurately measured at any level between 25 and 75% of glenoid height for Walch B2 and B3. We recommend that the glenoid equator be used as the reference to assure consistent and reliable version measurements in this group of patients.