Weak-Water-Coordination Electrolyte to Stabilize Zinc Anode Interface for Aqueous Zinc Ion Batteries.

The performance of zinc-ion batteries is severely hindered by the uncontrolled growth of dendrites and the severe side reactions on the zinc anode interface. To address these challenges, a weak-water-coordination electrolyte is realized in a peptone-ZnSO4 -based electrolyte to simultaneously regulate the solvation structure and the interfacial environment. The peptone molecules have stronger interaction with Zn2+ ions than with water molecules, making them more prone to coordinate with Zn2+ ions and then reducing the active water in the solvated sheath. Meantime, the peptone molecules selectively adsorb on the Zn metal surface, and then are reduced to form a stable solid-electrolyte interface layer that can facilitate uniform and dense Zn deposition to inhabit the dendritic growth. Consequently, the Zn||Zn symmetric cell can exhibit exceptional cycling performance over 3200 h at 1.0 mA cm-2 /1.0 mAh cm-2 in the peptone-ZnSO4 -based electrolyte. Moreover, when coupled with a Na2 V6 O16 ·3H2 O cathode, the cell exhibits a long lifespan of 3000 cycles and maintains a high capacity retention rate of 84.3% at 5.0 A g-1 . This study presents an effective approach for enabling simultaneous regulation of the solvation structure and interfacial environment to design a highly reversible Zn anode.

A Multifunctional Zwitterion Electrolyte Additive for Highly Reversible Zinc Metal Anode.

Although zinc metal anode is promising for zinc-ion batteries (ZIBs) owing to high energy density, its reversibility is significantly obstructed by uncontrolled dendrite growth and parasitic reactions. Optimizing electrolytes is a facile yet effective method to simultaneously address these issues. Herein, 2-(N-morpholino)ethanesulfonic acid (MES), a pH buffer as novel additive, is initially introduced into conventional ZnSO4 electrolyte to ensure a dendrite-free zinc anode surface, enabling a stable Zn/electrolyte interface, which is achieved by controlling the solvated sheath through H2O poor electric double layer (EDL) derived from zwitterionic groups. Moreover, this zwitterionic additive can balance localized H+ concentration of the electrolyte system, thus preventing parasitic reactions in damaging electrodes. DFT calculation proves that the MES additive has a strong affinity with Zn2+ and induces uniform deposition along (002) orientation. As a result, the Zn anode in MES-based electrolyte exhibits exceptional plating/stripping lifespan with 1600 h at 0.5 mA cm-2 (0.5 mAh cm-2) and 430 h at 5.0 mA cm-2 (5.0 mAh cm-2) while it maintains high coulombic efficiency of 99.8%. This work proposes an effective and facile approach for designing dendrite-free anode for future aqueous Zn-based storage devices.

A Holistic Additive Protocol Steers Dendrite-Free Zn(101) Orientational Electrodeposition.

Orientation guidance has shown its cutting edges in electrodeposition modulation to promote Zn anode stability toward commercialized standards. Nevertheless, large-scale orientational deposition is handicapped by the competition between Zn-ion reduction and mass transfer. Herein, a holistic electrolyte additive protocol is put forward via incorporating bio-derived dextrin molecules into a zinc sulfate electrolyte bath. Electrochemical tests in combination with molecular dynamics simulations demonstrate the alleviation of concentration polarization throughout accelerating Zn2+ diffusion and retarding their reduction. The predominant (101) texture on inert current collectors (i.e., Cu, Ti, and stainless steel) and (101)/(002) textures on Zn foils afford homogeneous electrical field distribution, which is contributed by the work difference to form the 2D nucleus and the adsorption of dextrin molecules, respectively. Consequently, the symmetric cell harvests a longevous cycling lifespan of over 4000 h at 0.5 mA cm-2 /0.5 mAh cm-2 while the Zn@Cu electrode sustains for 240 h at a high depth of discharge of 40%.

3D Carbon Fiber Skeleton Film Modified with Gradient Cu Nanoparticles as Auxiliary Anode Regulates Dendrite-Free, Bottom-Up Zinc Deposition.

Achieving stable Zn plating/stripping under high current density and large area capacity remains a major challenge for metal Zn anodes. To address this issue, common filter paper is utilized to construct 3D carbon fiber skeleton film modified with gradient Cu nanoparticles (CFF@Cu). The original zincophobic hydrophilic CFF is transformed into gradient zincophilic and reversed gradient hydrophilic composite, due to the gradient distribution of Cu nanoparticles. When CFF@Cu is placed above Zn foil as an auxiliary anode, Zn foil anode exhibits stable, reversible, and dendrite-free Zn plating/stripping for 1200 h at 10 mA cm-2 and 2 mAh cm-2, 2000 h at 2 mA cm-2 and 2 mAh cm-2, 340 h at 10 mA cm-2 and 10 mAh cm-2. Additionally, nucleation barrier of Zn, Zn2+ transport and deposition kinetics are improved. The deposits on the Zn foil anode become homogeneous, dense, and fine. Side reactions and by-products are effectively inhibited. The excellent performance is mainly attributed to the gradient zincophilic field in 3D CFF. A portion of Zn2+ is captured by Cu and deposited within CFF@Cu from bottom to top, which reduces and homogenizes Zn2+ flux on Zn foil, as well as weakens and homogenizes electric field on Zn foil.

Zincophilic Nanospheres Assembled as Solid-Electrolyte Interphase on Zn Metal Anodes for Reversible High-rate Zn-Ion Storage.

Aqueous Zn-ion batteries (ZIBs) are considered to be one of the most promising energy storage devices in the post-lithium-ion era with fast ionic conductivity, safety, and low cost. However, excessive accumulation of zinc dendrites will fracture and produce dead zinc, resulting in the unsatisfied utilization rate of Zn anodes, which greatly restricts the lifespan of the battery and reduces the reversibility. In this paper, by constructing a protective layer of ZnSnO3 hollow nanospheres in situ growth on the surface of the Zn anode, more zincophilic sites are established on the electrode surface. It demonstrates that uniform deposition of Zn ions by deepening the binding energy with Zn ion and its unique hollow structure shortens the diffusion distance of Zn ions and enhances the reaction kinetics. The assembled Zn-ion hybrid supercapacitor (ZHSC) of ZnSnO3@Zn//AC achieved a long-term lifespan with 4000 cycles at a current density of 10 mA cm-2 with a Coulombic efficiency of 99.31% and capacity retention of 79.6%. This work offers a new path for advanced Zn anodes interphase supporting the long cycle life with large capacities and improving electrochemical reversibility.

Synergistic Modulation of Mass Transfer and Parasitic Reactions of Zn Metal Anode via Bioinspired Artificial Protection Layer.

Rechargeable aqueous zinc-ion batteries are regarded as promising energy storage devices due to their attractive economic benefits and extraordinary electrochemical performance. However, the sluggish Zn2+ mass transfer behavior and water-induced parasitic reactions that occurred on the anode-electrode interface inevitably restrain their applications. Herein, inspired by the selective permeability and superior stability of plasma membrane, a thin UiO-66 metal-organic framework layer with smart aperture size is ex-situ decorated onto the Zn anode. Experimental characterizations in conjunction with theoretical calculations demonstrate that this bio-inspired layer promotes the de-solvation process of hydrated Zn2+ and reduces the effective contact between the anode and H2 O molecules, thereby boosting Zn2+ deposition kinetics and restraining interfacial parasitic reactions. Hence, the Zn||Zn cells could sustain a long lifespan of 1680 h and the Zn||Cu cells yielded a stable coulombic efficiency of over 99.3% throughout 600 cycles under the assistance of the bio-inspired layer. Moreover, pairing with δ-MnO2 cathode, the full cells also demonstrate prominent cycling stability and rate performance. From the bio-inspired design philosophy, this work provides a novel insight into the development of aqueous batteries.

Negatively Charged Hydrophobic Carbon Nano-Onion Interfacial Layer Enabling High-Rate and Ultralong-Life Zn-Based Energy Storage.

Zn-based electrochemical energy storage (EES) systems are attracting more attention, whereas their large-scale application is restricted by the dendrite and parasitic reaction-caused unstable Zn anodes. Herein, a negatively charged hydrophobic carbon nano-onion (CNO) interfacial layer is proposed to realize ultrastable and high-rate Zn anodes, enabling high-performance Zn-based EES. For the CNO interfacial layer, its hydrophobicity not only blocks active water but also reduces the Zn2+ desolvation barrier, and meanwhile, the negatively-charged CNO nanoparticles adsorb Zn2+ and repel SO4 2- to homogenize Zn2+ flux, accelerate Zn2+ desolvation and suppress the self-corrosion of Zn anodes. Besides, the conductive CNO interfacial layer increases the surface area for the Zn deposition to reduce local current density. Consequently, under the modulation of the CNO interfacial layer, Zn plating/stripping exhibits impressive reversibility with an average Coulombic efficiency of 99.4% over 800 cycles, and Zn anodes present significantly enhanced electrochemical stability and rate performance, whose operation lifetime exceeds 2000 h at 1 mA cm-2 and 350 h even at 10 mA cm-2 . Moreover, high-rate and ultralong-life Zn-ion hybrid supercapacitors are achieved with the CNO interfacial layer-modulated Zn anode and activated CNO cathode. This work provides new thinking in regulating the Zn deposition interface to realize high-performance Zn-based EES.

Highly-Efficient and Robust Zn Anodes Enabled by Sub-1-µm Zincophilic CrN Coatings.

For exploring advanced Zn-ion batteries (ZIBs) with long lifespan and high Coulombic efficiency (CE), the critically important point is to limit the undesired Zn dendrite and parasitic reactions. Among the coating for electrode is a promising strategy, relying on the trade-off between its thickness and stability to achieve the ultra-stable Zn anodes in ZIBs. Herein, a submicron-thick (≈0.4 µm) zincophilic CrN coatings are fabricated by a facile and industry-compatible magnetron sputtering approach. It is exhilarating that the ultrathin and dense CrN coatings with strong adsorption ability for Zn2+ exhibit an impressive lifespan up to 3700 h with ≈100% CE at 1 mA cm-2. Along with the experiments and theoretical calculations, it is verified that the introduced CrN coatings cannot only effectively suppress the dendrite growth and notorious parasitic reactions, but also allow the uniform Zn deposition due to the reduced nucleation energy. Moreover, the as-assembled Zn@CrN‖MnO2 full cell delivers a high specific capacity of 171.1 mAh g-1 after 1000 cycles at 1 A g-1, much better than that of Zn‖MnO2 analog (97.8 mAh g-1). This work provides a facile strategy for scalable fabrication of ultrathin zincophilic coating to push forward the practical applications of ZIBs.

In Situ Spontaneous Construction of Zinc Phosphate Coating Layer Toward Highly Reversible Zinc Metal Anodes.

Aqueous zinc ion batteries have received widespread attention due to their merits of high safety, high theoretical specific capacity, low cost, and environmental benignity. Nevertheless, the irreversible issues of Zn anode deriving from side reactions and dendrite growth have hindered its commercialization in large-scale energy storage systems. Herein, a zinc phosphate tetrahydrate (Zn3(PO4)2·4H2O, ZnPO) coating layer is in situ formed on the bare Zn by spontaneous redox reactions at room temperature to tackle the above issues. Particularly, the dense and brick-like ZnPO layer can effectively separate the anode surface from the aqueous electrolyte, thus suppressing the serious side reactions. Moreover, the ZnPO layer with high ionic conductivity, high Zn2+ transference number, and low nucleation barrier permits rapid Zn2+ transport and enables uniform Zn deposition, ensuring dendrite-free Zn deposition. As a result, the ZnPO@Zn symmetric battery achieves a high Coulombic efficiency of 99.8% and displays ultrahigh cycle stability over 6000 h (> 8 months), far surpassing its counterparts. Furthermore, the ZnPO@Zn||MnO2 full battery exhibits excellent electrochemical performances. Therefore, this work provides a new reference for simple and large-scale preparation of highly reversible Zn metal anodes, and has great potential for practical applications.

A "Zn2+ in Salt" Interphase Enabling High-Performance Zn Metal Anodes.

Zinc metal is a promising anode candidate for aqueous zinc ion batteries due to its high theoretical capacity, low cost, and high safety. However, its application is currently restricted by hydrogen evolution reactions (HER), by-product formation, and Zn dendrite growth. Herein, a "Zn2+ in salt" (ZIS) interphase is in situ constructed on the surface of the anode (ZIS@Zn). Unlike the conventional "Zn2+ in water" working environment of Zn anodes, the intrinsic hydrophobicity of the ZIS interphase isolates the anode from direct contact with the aqueous electrolyte, thereby protecting it from HER, and the accompanying side reactions. More importantly, it works as an ordered water-free ion-conducting medium, which guides uniform Zn deposition and facilitates rapid Zn2+ migration at the interface. As a result, the symmetric cells assembled with ZIS@Zn exhibit dendrite-free plating/striping at 4500 h and a high critical current of 14 mA cm-2. When matched with a vanadium-based (NVO) cathode, the full battery exhibits excellent long-term cycling stability, with 88% capacity retention after 1600 cycles. This work provides an effective strategy to promote the stability and reversibility of Zn anodes in aqueous electrolytes.

Preferred Orientation Deposition via Multifunctional Gel Electrolyte with Molecular Anchor Enabling Highly Reversible Zn Anode.

The high activity of water molecules results in a series of awful parasitic reaction, which seriously impede the development of aqueous zinc batteries. Herein, a new gel electrolyte with multiple molecular anchors is designed by employing natural biomaterials from chitosan and chlorophyll derivative. The gel electrolyte firmly anchors water molecules by ternary hydrogen bonding to reduce the activity of water molecules and inhibit hydrogen evolution reaction. Meanwhile, the multipolar charged functional groups realize the gradient induction and redistribution of Zn2+ , which drives oriented Zn (002) plane deposition of Zn2+ and then achieves uniform Zn deposition and dendrite-free anode. As a result, it endows the Zn||Zn cell with over 1700 h stripping/plating processes and a high efficiency of 99.4% for the Zn||Cu cell. In addition, the Zn||V2 O5 full cells also exhibit capacity retention of 81.7% after 600 cycles at 0.5 A g-1 and excellent long-term stability over 1600 cycles at 2 A g-1 , and the flexible pouch cells can provide stable power for light-emitting diodes even after repeated bending. The gel electrolyte strategy provides a reference for reversible zinc anode and flexible wearable devices.

Additive Manufacturing of Grid Reservoir-Integrated Anodes for Dendrite-Free, Safe, and Ultra-Low Voltage Zinc-Ion Batteries.

This work reports a novel 3D printed grid reservoir-integrated mesoporous carbon coordinated silicon oxycarbide hybrid composite (3DP-MPC-SiOC) to establish the zincophile interphase for controlling the dendrite formation. The customized 3D printed grid patterned structure inhibits Zn dendrite growth and achieves long-term stability with reduced voltage polarization due to homogeneous electric field distribution. The hybrid composite consisting of SiOC interpenetrated within carbon constructs a high zinc nucleation interphase, hence promoting uniform Zn2+ deposition and enhancing ionic diffusion with dendrite-free growth and a reduced nucleation energy barrier. As a result, the 3DP-MPC-SiOC@Zn symmetrical cell affords a highly reversible Zn plating/stripping and dendrite-free structure over 198 h with an ultra-low voltage polarization. These inspiring performances endow the 3DP anode with a 3DP-VO cathode as a full battery, which shows a retention capacity of 78.8 mAh g-1 (Coulombic efficiency: 94.04%) at 0.1 A g-1 and a large energy density of 41 Wh kg-1 at a power density of 1.2 W kg-1 (based on the total mass of electrode) after 120 cycles. This newly developed 3D printing of hybrid composite as an electrode is straightforward and scalable and provides a novel concept for realizing dendrite-free and stable rechargeable Zn-ion batteries.

Zn Microbatteries Explore Ways for Integrations in Intelligent Systems.

As intelligent microsystems develop, many revolutionary applications, such as the swallowing surgeon proposed by Richard Feynman, are about to evolve. Nonetheless, integrable energy storage satisfying the demand for autonomous operations has emerged as a major obstacle to the deployment of intelligent microsystems. A reason for the lagging development of integrable batteries is the challenge of miniaturization through microfabrication procedures. Lithium batteries, generated by the most successful battery chemistry, are not stable in the air, thus creating major manufacturing challenges. Other cations (Na+ , Mg2+ , Al3+ , K+ ) are still in the early stages of development. In contrast, the superior stability of zinc batteries in the air brings high compatibility to microfabrication protocols and has already demonstrated excellent practicability in full-sized devices. To obtain energy-dense and high-power zinc microbatteries within square-millimeter or smaller footprints, sandwich, pillar, and Swiss-roll configurations are developed. Thin interdigital and fiber microbatteries find their applications being integrated into wearable devices and electronic skin. It is foreseeable that zinc microbatteries will find their way into highly integrated microsystems unlocking their full potential for autonomous operation. This review summarizes the material development, configuration innovation, and application-oriented integration of zinc microbatteries.

Amino-Functionalized Interfacial Layer Enables an Ultra-Uniform Amorphous Solid Electrolyte Interphase for High-Performance Aqueous Zinc-Based Batteries.

Aqueous rechargeable zinc-based batteries (ZBBs) are emerging as desirable energy storage systems because of their high capacity, low cost, and inherent safety. However, the further application of ZBBs still faces many challenges, such as the issues of uncontrolled dendrite growth and severe parasitic reactions occurring at the Zn anode. Herein, an amino-grafted bacterial cellulose (NBC) film is prepared as artificial solid electrolyte interphase (SEI) for the Zn metal anodes, which can significantly reduce zinc nucleation overpotential and lead to the dendrite-free deposition of Zn metal along the (002) crystal plane more easily without any external stimulus. More importantly, the chelation between the modified amino groups and zinc ions can promote the formation of an ultra-even amorphous SEI upon cycling, reducing the activity of hydrate ions, and inhibiting the water-induced side reactions. As a result, the Zn||Zn symmetric cell with NBC film exhibits lower overpotential and higher cyclic stability. When coupled with the V2 O5 cathode, the practical pouch cell achieves superior electrochemical performance over 1000 cycles.

Aligned Dipoles Induced Electric-Field Promoting Zinc-Ion De-Solvation toward Highly Stable Dendrite-Free Zinc-Metal Batteries.

Water-induced parasitic reactions and uncontrolled dendritic Zn growth are long-lasting tricky problems that severely hinder the development of aqueous zinc-metal batteries. Those notorious issues are closely related to electrolyte configuration and zinc-ion transport behavior. Herein, through constructing aligned dipoles induced electric-field on Zn surface, both the solvation structure and transport behavior of zinc-ions are fundamentally changed. The vertically ordered zinc-ion migration trajectory and gradually concentrated zinc-ion achieved inside the polarized electric-field remarkably eliminate water related side-reactions and Zn dendrites. Zn-metal under the polarized electric-field demonstrated significantly improve reversibility and a dendrite-free surface with strong (002) Zn deposition texturing. Zn||Zn symmetric cell delivers greatly prolonged lifespan up to 1400 h (17 times longer than that of the cell based on bare Zn) while the Zn||Cu half-cell demonstrate ultrahigh 99.9% coulombic efficiency. NH4 V4 O10 ||Zn half-cell delivered exceptional-high 132 mAh g-1 capacity after ultralong 2000 cycles (≈100% capacity retention). In addition, MnO2 ||Zn pouch-cell under aligned dipoles induced electric-field maintains 87.9% capacity retention after 150 cycles under practical condition of high MnO2 mass loading (≈10 mg cm-2 ) and limited N/P ratio. It is considered that this new strategy can also be implemented to other metallic batteries and spur the development of batteries with long-lifespan and high-energy-density.

Thickness-Controlled Synthesis of Compact and Uniform MOF Protective Layer for Zinc Anode to Achieve 85% Zinc Utilization.

Zinc anode-based aqueous batteries have attracted considerable interest for large-scale energy storage and wearable devices. Unfortunately, the formation of Zn dendrite, parasitic hydrogen evolution reaction (HER), and irreversible by-products, seriously restrict their practical applications. Herein, a series of compact and uniform metal-organic frameworks (MOFs) films with precisely controlled thickness (150-600 nm) are constructed by a pre-oxide gas deposition (POGD) method on Zn foil. Under the protection of MOF layer with optimum thickness, the corrosion of zinc, the side reaction of hydrogen evolution, and the growth of dendrites on the zinc surface are suppressed. The symmetric cell based on Zn@ZIF-8 anode exhibits exceptional cyclicality for over 1100 h with low voltage hysteresis of≈38 mV at 1 mA cm-2 . Even at current densities of 50 mA cm-2 with an area capacity of 50 mAh cm-2 (85% Zn utilization), the electrode can keep cycling for >100 h. Besides, this Zn@ZIF-8 anode also delivers a high average CE of 99.4% at 1 mA cm-2 . Moreover, a rechargeable Zn ion battery is fabricated based on the Zn@ZIF-8 anode and MnO2 cathode, which presents an exceptionally long lifespan with no capacity attenuation for 1000 cycles.

Solvation Modulation Enhances Anion-Derived Solid Electrolyte Interphase for Deep Cycling of Aqueous Zinc Metal Batteries.

Stable Zn anodes with a high utilization efficiency pose a challenge due to notorious dendrite growth and severe side reactions. Therefore, electrolyte additives are developed to address these issues. However, the additives are always consumed by the electrochemical reactions over cycling, affecting the cycling stability. Here, hexamethylphosphoric triamide (HMPA) is reported as an electrolyte additive for achieving stable cycling of Zn anodes. HMPA reshapes the solvation structures and promotes anion decomposition, leading to the in situ formation of inorganic-rich solid-electrolyte-interphase. More interestingly, this anion decomposition does not involve HMPA, preserving its long-term impact on the electrolyte. Thus, the symmetric cells with HMPA in the electrolyte survive ≈500 h at 10 mA cm-2 for 10 mAh cm-2 or ≈200 h at 40 mA cm-2 for 10 mAh cm-2 with a Zn utilization rate of 85.6 %. The full cells of Zn||V2 O5 exhibit a record-high cumulative capacity even under a lean electrolyte condition (E/C ratio=12 µL mAh-1 ), a limited Zn supply (N/P ratio=1.8) and a high areal capacity (6.6 mAh cm-2 ).

Stabilizing Interface pH by Mixing Electrolytes for High-Performance Aqueous Zn Metal Batteries.

Aqueous zinc metal batteries with mild acidic electrolytes are considered promising candidates for large-scale energy storage. However, the Zn anode suffers from severe Zn dendrite growth and side reactions due to the unstable interfacial pH and the absence of a solid electrolyte interphase (SEI) protective layer. Herein, a novel and simple mixed electrolyte strategy is proposed to address these problems. The mixed electrolytes of 2 M ZnSO4 and 2 M Zn (CF3 SO3 )2 can efficiently buffer the interfacial pH and induce the in situ formation of the organic-inorganic SEI layer, which eliminates dendrite growth and prevents side reactions. As a result, Zn anodes in mixed electrolyte exhibit a lifespan enhancement over 400 times, endure stable cycling over 270 h at a high DOD of 62% and achieve high Zn plating/stripping reversibility with an average CE of 99.5% for 1000 cycles at 1 mA cm-2 . The findings pave the way for developing practical electrolyte systems for Zn batteries.

Copper Hexacyanoferrate Solid-State Electrolyte Protection Layer on Zn Metal Anode for High-Performance Aqueous Zinc-Ion Batteries.

Zinc (Zn) metal possesses broad prospects as an anode for aqueous zinc-ion batteries (AZIBs) due to its considerable theoretical capacity of 820 mAh g-1 . However, the Zn anode suffers from dendrite growth and side reactions during Zn stripping/plating. Herein, a Prussian blue analog of copper hexacyanoferrate (CuHCF) with a 3D open structure and rich polar groups (CN) is coated on Zn foil as a solid-state electrolyte (SSE) protection layer to protect the Zn anode. The CuHCF protection layer possesses low activation energy of 26.49 kJ mol-1 , the high ionic conductivity of 7.6 mS cm-1 , and a large Zn2+ transference number of 0.74. Hence, the Zn@CuHCF||Zn@CuHCF symmetric cell delivers high cycling stability over 1800 h at 5 mA cm-2 , an excellent depth of discharge of 51.3%, and the accumulative discharge capacity over 3000 mAh cm-2 . In addition, the Zn//Ti@CuHCF asymmetric cell achieves the coulombic efficiency (CE) of 99.87% after 2000 cycles. More importantly, the Zn@CuHCF//V2 O5 full cell presents outstanding capacity retention of 87.6% at 10 A g-1 after 3000 cycles. This work develops a type of material to form an artificial protection layer for high-performance AZIBs.

Molecular-Level Zn-Ion Transfer Pump Specifically Functioning on (002) Facets Enables Durable Zn Anodes.

The modification of metallic Zn anode contributes to solving the cycling issue of Zn-ion batteries (ZIBs) by restraining the dendrite growth and side reactions. In this regard, modulating (002) Zn is an effective way to prolong the lifespan of ZIBs with a parallel arrangement of Zn deposition. Herein, the authors propose to add trace amounts of Zn(BF4 )2 additive in 3 M ZnSO4 to promote in-plane Zn deposition by forming a BF4 - -[Zn(H2 O)6 ]2+ -[Zn(BF4 )3 ]- transfer process and specifically functioning on (002) facets. In this way, the optimized electrolyte highly boosts the cycling stability of Zn anodes with a long lifespan at 34.2% Zn utilization (500 h/10 mA cm-2 ) and 51.3% Zn utilization (360 h/10 mA cm-2 ; 834 h/1 mA cm-2 ). Moreover, the electroplated Zn on Cu substrate exhibits a competitive cumulative plating capacity (CPC) of 2.87 Ah cm-2 under harsh conditions. The assembled Zn|(NH4 )2 V6 O16 ·3H2 O full cells with a high cathode loading of 29.12 mg cm-2 also realizes almost no capacity degradation even after 2000 cycles at 2 A g-1 . With this cost-effective strategy, it is promising to push the development of aqueous ZIBs as well as provide inspiration for metal anode optimization in other energy storage systems.