Autologous platelet concentrates in alveolar ridge preservation: A systematic review with meta-analyses.

In order to evaluate the therapeutic advantages of various autologous platelet concentrates (APC) as a single biomaterial during alveolar ridge preservation (ARP), a systematic review with meta-analyses was conducted. PubMed, EMBASE, Web of Science, and Scopus were screened for randomized controlled trials (RCTs) that were released prior to 2024. The selected papers compared an APC with either unassisted healing (blood clot) or another biomaterial during ARP (third molars were not included). The outcome parameters included alveolar bone dimension alterations, soft tissue healing, and post-op pain intensity. The search yielded 35 papers (33 studies), one applying platelet-rich plasma (PRP), six using plasma rich in growth factors (PRGF), and 28 using leukocyte- and platelet-rich fibrin (L-PRF). These studies showed a large heterogeneity (e.g., outcome parameters, timing, surgical approach, and inclusion criteria), which hindered drawing strong conclusions. In most studies, however, ARP with PRP, PRGF, and L-PRF alone produced faster soft tissue healing, less post-extraction pain, less alveolar ridge resorption, more socket bone fill, and a higher bone density when compared to unassisted (spontaneous) healing. The ultimate benefit appears to be significantly influenced by the surgical approach. Limited literature exists comparing APC with other biomaterials for ARP, resulting in inconclusive data. APC application for ARP is a promising strategy to improve soft and hard tissue healing and reduce post-extraction pain.

Instructions for the use of L-PRF in different clinical indications.

Autologous platelet concentrates (APCs) have demonstrated clear benefits across various clinical applications, including alveolar ridge preservation, guided tissue regeneration, guided bone regeneration, sinus floor elevation (both lateral window approach and transcrestal technique), endodontic surgery, the treatment of medication-related osteonecrosis of the jaw bones, and periodontal plastic surgery. To ensure an optimal clinical outcome, clinicians must adhere strictly to the protocol to prepare the APCs and, especially follow evidence-based surgical guidelines, often simple but crucial, to minimize the likelihood of errors. The majority of clinical trials reported on second-generation APCs [the leukocyte- and platelet-rich fibrin (L-PRF) family, including its modifications (A-PRF, A-PRF+, CGF, T-PRF, H-PRF, etc.)]. These second-generation APCs offer additional benefits compared to the first-generation APCs, making them the preferred choice for the development of clinical recommendations. These recommendations have been formulated through a meticulous examination of the available clinical data and the clinical experience of the authors of this paper.

Introduction and overview on autogenous Platelet concentrates.

This special issue on autologous platelet concentrates (APCs) provides clinicians with an overview on the current understanding of the use of these biomaterials for soft and hard-tissue regeneration. The included papers summarize scientific evidence and the clinical findings, presented in simple tables that outline potential benefits including Patient Reported Outcome Measures (PROMs). This approach enables clinicians to assess clinical relevance and researchers to identify significant gaps in the literature. The first part provides a comprehensive summary of the basic science surrounding APC, with particular focus on their preparation methods. Clear recommendations are outlined, which are crucial for obtaining high-quality APCs, alongside an exploration of how APCs may influence both soft and hard tissue healing processes. Part 2 delves into the clinical evidence for the potential benefits of APCs across a range of applications: alveolar ridge preservation, sinus floor elevation, periodontal plastic surgery, guided tissue regeneration, guided bone regeneration, the healing of Medication-Related Osteonecrosis of the Jaw (MRONJ), and endodontic surgery. In the part 3, the discussion turns to the effects of APCs on the healing of extra-oral wounds, including diabetic foot ulcers, venous leg ulcers, pressure injuries, burns, and more. For those clinicians persuaded by the evidence, the fourth section offers a detailed, step-by-step flowchart for each treatment modality, providing a clear guide for clinical application.

The adjunctive effect of polydeoxyribonucleotide on bone formation in alveolar ridge preservation: A pre-clinical in vivo study.

AIM: This study investigated the adjunctive effect of polydeoxyribonucleotide (PDRN) on bone formation in alveolar ridge preservation (ARP) sockets. MATERIALS AND METHODS: Both mandibular second, third and fourth premolars of eight beagle dogs were randomly divided into ARP and ARP/PDRN groups. Following tooth extraction, ARP procedures were conducted using collagenized alloplastic graft material and bilayer collagen membrane soaked with normal saline (ARP group) or PDRN (ARP/PDRN group) for 10 min before application. Both groups were also randomly allocated to 2-, 4- or 12-week healing subgroups. The primary endpoint of this study was to compare histomorphometric differences between ARP and ARP/PDRN. The secondary endpoints of this study were to compare micro-CT analysis and three-dimensional volumetric measurement between the two groups. RESULTS: In the histomorphometric analysis, the ARP/PDRN group exhibited greater new bone formation at coronal, middle and total position compared with the ARP group at 2-week healing. The number of newly formed blood vessels was higher in the ARP/PDRN group than in the ARP group at 2- and 4-week healing. In micro-CT analysis, the mean new bone volume/total bone volume between ARP and ARP/PDRN was statistically significant at 2-week healing. Ridge volume alterations were significantly decreased in the ARP/PDRN group during entire healing time compared with the ARP group, especially on the buccal side. CONCLUSIONS: The application of PDRN in ARP might provide additional benefits for early bone regeneration and maintenance of buccal ridge volume.

Clinical outcomes following atrophic alveolar ridge reconstruction using collagenated xenogeneic bone block or autogenous bone block: One-year follow-up of a randomized controlled clinical.

AIM: This investigation aimed to evaluate the 1-year survival of implants placed after staged lateral alveolar ridge augmentation using equine-derived collagenated xenogeneic bone blocks (CXBBs) or autogenous bone block (ABB). MATERIALS AND METHODS: Fifty patients who underwent lateral augmentation in a previous trial were included. The primary outcome measure was implant survival at the 1-year follow-up, and secondary outcomes included implant success, peri-implant clinical and volumetric parameters, pink aesthetic scores (PES) and patient-reported outcome measures. Data analysis involved Fisher's exact test, the Mann-Whitney U-test and the Wilcoxon signed-rank test. RESULTS: In this study, no late implant failures were observed. The cumulative survival rates were 78.6% for the CXBB group and 90.9% for the ABB group, with no difference between the groups. Similarly, the success rates were 53.6% and 63.6%, respectively, showing no significant difference. Peri-implant clinical and volumetric parameters indicated the presence of healthy peri-implant tissues surrounding implants placed in both CXBB- and ABB-augmented sites. PES were 8.5 and 11.0 for implants placed in CXBB- and ABB-augmented sites, respectively. Furthermore, patient satisfaction rates were high and similar between the groups. CONCLUSIONS: Dental implants placed in both CXBB- and ABB-augmented ridges demonstrated no statistically significant differences in clinical, volumetric and aesthetic outcomes, along with high patient satisfaction rates.

Efficacy and safety of a new heterologous fibrin biopolymer on socket bone healing after tooth extraction: An experimental pre-clinical study.

AIM: To assess the efficacy of heterologous fibrin biopolymer (HFB) in promoting alveolar bone healing after tooth extraction in rats. MATERIALS AND METHODS: The upper right incisors of 48 Wistar rats were extracted. Toothless sockets were filled with HFB (HFBG, n = 24) or blood clot (BCG, n = 24). The tooth extraction sites were subjected to micro-computed tomography (micro-CT), histological, histomorphometric and immunohistochemical (for Runt-related transcription factor 2/Runx2 and tartrate-resistant acid phosphatase/TRAP) analyses on days 0, 7, 14 and 42 after extraction. RESULTS: Socket volume remained similar between days 0 and 14 (69 ± 5.4 mm3), except in the BCG on day 14, when it was 10% lower (p = .043). Although the number of Runx2+ osteoblasts was high and similar in both groups (34 × 102 cells/mm2), the HFBG showed lower inflammatory process and osteoclast activity than BCG at 7 days. On day 14, the number of Runx2+ osteoblasts remained high and similar to the previous period in both groups. However, osteoclast activity increased. This increase was 55% lower in the HFBG than BCG. In the BCG, the presence of an inflammatory process and larger and numerous osteoclasts on day 14 led to resorption of the alveolar bone ridge and newly formed bone. On day 42, numbers of Runx2+ osteoblast and TRAP+ osteoclasts decreased dramatically in both groups. Although the BCG exhibited a more mature cortical bone formation, it exhibited a higher socket reduction (28.3 ± 6.67%) and smaller bone volume (37 ± 5.8 mm3) compared with HFBG (socket reduction of 14.8 ± 7.14% and total bone volume of 46 ± 5.4 mm3). CONCLUSIONS: HFB effectively suppresses osteoclast activity and reduces alveolar bone resorption compared with blood clot, thus preventing three-dimensional bone loss, particularly during the early healing period. HFB emerges as a promising biopharmaceutical material for enhancing healing processes after tooth extraction.

Assessment of soft and hard tissue changes following micro crestal flap-Alveolar ridge preservation and augmentation at molar extraction sites in patients with stage III/IV periodontitis: A randomized controlled trial.

AIM: This study aimed to assess hard and soft tissue contour changes following micro crestal flap-alveolar ridge preservation (MCF-ARP) and natural healing (NH) in periodontally compromised molar extraction sites and to analyse the feasibility and need for bone augmentation during implant therapy. MATERIALS AND METHODS: Fifty-six patients with 70 sites were randomized into two groups at the site level (35 sites from 31 patients in the test group and 35 sites from 29 patients in the control group). Among whom, four patients contributed one tooth to the control group and one tooth to the test group. Hard tissue indicators were measured using cone beam computed tomography performed before tooth extraction and 6 months after surgery. Soft tissue contour changes were assessed using intraoral scanning performed before and immediately after surgery and also 2 weeks and 1, 3 and 6 months after surgery. RESULTS: Six months after surgery, the MCF-ARP group showed less resorption in buccal bone height (p = .032) and greater augmentation in central bone height (p = .001) and ridge width (p = .009). The mean, vertical and horizontal collapse of buccal soft tissue contour in the MCF-ARP group were 0.95 mm (p = .010), 0.61 mm (p = .019) and 0.56 mm (p = .013) less than that in the NH group, respectively. There were significantly (p = .007) fewer sites in the MCF-ARP group than in the NH group (0% vs. 26.7%) for staged bone augmentation and more sites that could be treated with simple implant procedure in the MCF-ARP group than in the NH group (71.9% vs. 56.6%). CONCLUSIONS: Compared with NH, MCF-ARP reduced bone resorption in periodontally compromised molar extraction sites and maintained the buccal soft tissue contour. MCF-ARP reduces the need for complex bone augmentation procedures in implant therapy. TRIAL REGISTRATION: Chinese Clinical Trial Register (ChiCTR) ChiCTR2200056335. Registered on 4 February 2022, Version 1.0.

Fish scale-derived hydroxyapatite for alveolar ridge preservation.

Alveolar ridge resorption following tooth extraction poses significant challenges for future dental restorations. This study investigated the efficacy of fish scale-derived hydroxyapatite (FSHA) as a socket preservation graft material to maintain alveolar bone volume and architecture. FSHA was extracted from *Labeo rohita* fish scales and characterized using Fourier transform infrared (FTIR) analysis. In vitro, biocompatibility and osteogenic potential were assessed using Saos-2 human osteosarcoma cells. Cell viability, migration, and proliferation were evaluated using MTT and scratch assays. In vivo performance was assessed in a rat model, and FSHA was compared to a commercial xenograft (Osseograft) and ungrafted controls. Histological analysis was performed at 8-week post-implantation to quantify new bone formation. FTIR confirmed the purity and homogeneity of FSHA. In vitro, FSHA enhanced Saos-2 viability, migration, and proliferation compared to controls. In vivo, FSHA demonstrated superior bone regeneration compared to Osseograft and ungrafted sites, with balanced graft resorption and new bone formation. Histological analysis revealed an active incorporation of FSHA into new bone, with minimal gaps and ongoing remodeling. Approximately 50%-60% of FSHA was resorbed by 8 weeks, closely matching the rate of new bone deposition. FSHA stimulated more bone formation in the apical socket region than in coronal areas. In conclusion, FSHA is a promising biomaterial for alveolar ridge preservation, exhibiting excellent biocompatibility, osteogenic potential, and balanced resorption. Its ability to promote robust bone regeneration highlights its potential as an effective alternative to currently used graft materials in socket preservation procedures.

Effects of hard- and/or soft-tissue grafting with early implant placement: Histomorphometric outcomes of an exploratory study in canines.

OBJECTIVE: To histomorphometrically determine the effects of hard- and/or soft-tissue augmentation by applying the early implant placement protocol. MATERIALS AND METHODS: The distal roots of the maxillary second and third premolars were extracted in 10 mongrel dogs. After 1 month, early implant placement was performed in the distal roots, resulting in buccal dehiscence defects. Four treatments were then randomly applied: (1) guided bone regeneration (GBR), (2) connective tissue grafting (CTG), (3) simultaneous GBR and CTG (GBR + CTG) and (4) no further treatment (control). Healing abutments were connected to all implants to allow non-submerged healing. At 4 and 16 weeks, tissue sections were harvested and histomorphometric analyses were performed. RESULTS: Group GBR presented the largest total tissue thickness at 4 weeks, but underwent a greater remodelling compared with the other groups between 4 and 16 weeks. At 16 weeks, the overall tissue thickness was largest in group GBR + CTG. This group was also the most favourable in terms of the level of the margo mucosae and the presence of mineralized tissue at the coronal level. Group CTG demonstrated a stable tissue thickness over time, with a larger thickness at 16 weeks compared with group GBR. CONCLUSION: Simultaneous CTG and GBR resulted in the most-favourable tissue thickness when applying the early implant placement protocol.

Alveolar ridge preservation in posterior maxillary teeth for reduction in the potential need for sinus floor elevation procedures: A pilot study.

OBJECTIVES: To investigate the effects of alveolar ridge preservation (ARP) on ridge height, sinus pneumatization and the potential need for lateral sinus augmentation following extraction in the posterior maxilla. MATERIALS AND METHODS: This randomized controlled pilot study included 28 patients requiring extraction in the posterior maxilla with bone height between 6 and 8 mm. The sites were randomly allocated to either unassisted socket healing (Control), ARP with deproteinized bovine bone mineral (DBBM) (Test 1), or collagen-stabilized DBBM (Test 2) groups. Pre- and post-operative CTs at 4 months were taken to determine changes in ridge heights, sinus volume, and the need for sinus floor elevation (SFE) procedures for cases where the residual mid-ridge height was < 5 mm. Site-level analyses for changes in vertical ridge dimensions and sinus volume pre- and post-extraction/ARP were conducted using paired t-tests. Differences in mean changes in vertical ridge dimensions and sinus volume between the groups were determined using one-way ANOVA. RESULTS: Significantly greater mean mid-ridge height reduction occurred in the control group (-2.7 ± 0.9 mm) compared to Test 1 (0.9 ± 3.7 mm) and Test 2 (1.0 ± 2.8 mm) groups (p < .05). No significant changes in mean mid-ridge height were found in either test groups. Volumetric analysis showed a significantly greater increase in sinus volume in the control group (0.7 ± 0.7 cm3) compared to Test 1 (n = 3, -0.7 ± 0.8 cm3) group (p = .03). 89% of patients in the control group would require lateral window SFE  compared to Test 1 (42.8%) and Test 2 (40%) groups. CONCLUSION: ARP was effective in attenuating height changes in the middle of the ridge and may reduce sinus pneumatization following extraction in the posterior maxilla. This could potentially decrease the need for more invasive sinus augmentation procedures.

Ridge preservation using a self-retaining block type bone substitute for extraction sockets with buccal dehiscence defects - A preclinical study.

OBJECTIVE: To evaluate the effect of a self-retaining block-type bone substitute (srBB) on the dimensional stability of the horizontal ridge width at the coronal level in a buccal dehiscence model. MATERIALS AND METHODS: Four box-shaped bone defects with a buccal dehiscence were surgically prepared in the partially edentulous mandible (n = 6). Experimental biomaterials were randomly assigned to each site: (1) Control group: no treatment, (2) particle-type bone substitute (PBS) group, (3) collagenated soft block bone substitute (csBB) group, and (4) self-retaining synthetic block bone (srBB) group. In all grafted groups, a collagen membrane covered the biomaterials. At 16 weeks, clinical, histological, and radiographic analyses were performed. RESULTS: Three of the six blocks in the srBB group became exposed and fell out during the first week after surgery. Therefore, the remaining three specimens were renamed RsrBB group. The RsrBB group showed an increase horizontal ridge compared to the pristine bone width at 2-4 mm below the CEJ, while the other groups showed resorption (augmented width at 2 mm below: 4.2, 42.4, 36.2, and 110.1% in the control, PBS, csBB, and RsrBB groups, respectively). The mineralized bone area was largest in the RsrBB group (4.74, 3.44, 5.67, and 7.77 mm2 in the control, PBS, csBB, and RsrBB groups, respectively.). CONCLUSIONS: The srBB group demonstrated the highest volume stability at the coronal level. These findings would potentially suggest that self-retaining block bone substitute might be a good candidate for alveolar ridge preservation.

Alveolar ridge preservation of two-wall bone defects using mineralized dentin matrix: An experimental pre-clinical study.

OBJECTIVES: To study bone healing of two-wall bone defects after alveolar ridge preservation using mineralized dentin matrix. MATERIALS AND METHODS: After distal roots extraction of second and fourth premolars (P2, P4) on one lateral mandible in 12 beagles, two-wall bone defects (5 × 5 × 5 mm) were surgically created distally to the remaining mesial roots of P2 and P4. A total of 24 sites were randomly allocated to three groups (implant material- time of execution): mineralized dentin matrix (MDM)-3 m (MDM + collagen membrane; 3 months), MDM-6 m (MDM particles + collagen membrane; 6 months), and C-6 m (collagen membrane only; 6 months). Clinical, radiographic, digital, and histological examinations were performed 3 and 6 months after surgery. RESULTS: The bone healing in MDM groups were better compared to Control group (volume of bone regenerated in total: 25.12 mm3 vs. 13.30 mm3, p = .046; trabecular volume/total volume: 58.84% vs. 39.18%, p = .001; new bone formation rate: 44.13% vs. 31.88%, p = .047). Vertically, the radiological bone level of bone defect in MDM-6 m group was higher than that in C-6 m group (vertical height of bone defect: 1.55 mm vs. 2.74 mm, p = .018). Horizontally, no significant differences in buccolingual bone width were found between MDM and C groups at any time or at any level below the alveolar ridge. The percentages of remaining MDM were <1% in both MDM-3 m and MDM-6 m groups. CONCLUSIONS: MDM improved bone healing of two-wall bone defects and might be considered as a socket fill material used following tooth extraction.

Feasibility of Immediate, Early and Delayed Implant Placement for Single Tooth Replacement in the Premaxilla: A Retrospective Cone-Beam Computed Tomography Study of 100 Cases.

AIM: To assess the feasibility of immediate (IIP), early (EIP) and delayed implant placement (DIP) for single tooth replacement in the premaxilla on the basis of the complete indication area of each approach in routine practice. MATERIALS AND METHODS: Data from 100 patients (59 women, 41 men, all Caucasians) aged between 19 and 81 years old (mean age 51.71) who had been consecutively treated with a single implant in the premaxilla (13-23) in one private periodontal practice were retrospectively collected. Demographic data, diagnostic information and linear measurements were extracted from patient files and CBCTs. The feasibility of IIP, EIP and DIP was assessed for all cases by both authors, based on the following criteria: availability of apical bone, position of the tooth in relation to the morphology of the alveolar process, buccal bone morphology and presence of midfacial recession. The reasons for not being able to perform an approach, and the viable alternatives for each approach were secondary outcomes. DIP was considered to have been preceded by alveolar ridge preservation (ARP). RESULTS: Ninety-two patients could be treated by means of IIP, EIP or DIP. In eight patients none of these approaches were possible as they required bone augmentation prior to implant placement. Fifty-two patients (95% CI: 42%-62%) could by treated with IIP, 58 (95% CI: 48%-67%) with EIP and 88 (95% CI: 80%-93%) with DIP. The feasibility proportions of IIP and EIP were significantly lower than the one of DIP (p < 0.001). All patients who could be treated with IIP could also be treated with EIP or DIP. Lack of apical bone for implant anchorage was the main reason for not being able to perform IIP and EIP. Complete loss of the buccal bone wall and the need for bone augmentation prior to implant placement were the reasons for not being able to perform DIP. CONCLUSION: From the results of this retrospective CBCT analysis, DIP is nearly always possible in contrast to IIP and EIP. Therefore, and since it is much easier than IIP and EIP, inexperienced clinicians should mainly focus on ARP and DIP in clinical practice deferring IIP and EIP until more surgical skills have been acquired.

Horizontal Guided Bone Regeneration of the Posterior Mandible to Allow Implant Placement: 1-Year Prospective Study Results.

OBJECTIVE: Assess whether horizontal ridge augmentation with guided bone regeneration (GBR) using deproteinized bovine bone mineral (DBBM), autologous bone, and a resorbable collagen membrane supports successful implant placement. MATERIALS AND METHODS: This open, prospective, single-cohort, multicenter clinical study included patients with ridge defects that required GBR prior to implant insertion. The primary endpoint was radiologically assessed bone gain after 8 months post-GBR, measured at the center of planned implant sites. Secondary endpoints included implant survival and success, marginal bone levels (MBLs), MBL changes, and soft tissue health. RESULTS: Of 45 patients evaluated 8 months post-GBR, nine experienced dehiscence in the first 3 weeks of the healing period. GBR led to radiologically determined mean bone width gain of 4.0 ± 1.5 mm and 4.8 ± 1.7 mm, measured 1 and 3 mm from the top of the crest, respectively, allowing successful implant placement in 44 patients (97.8%). The cumulative implant survival and success rates were 98.9% and 95.5%, respectively. MBLs were stable: -1.18 ± 0.64 mm at definitive prosthesis placement (DPP) and - 1.07 ± 0.74 mm at 1 year. Soft tissue health and esthetics (plaque and bleeding indices, papilla, keratinized mucosa, and pink esthetic score) improved from DPP to 1 year. Patients were highly satisfied with implant function and esthetics, and their oral health-related quality of life improved. CONCLUSIONS: GBR using DBBM and a collagen membrane offered a safe and effective treatment option for horizontal ridge augmentation sufficient to support implant-based tooth rehabilitation. TRIAL REGISTRATION: Registered at ClinicalTrials.gov NCT03028922 (registrations sites, as above listed affiliations, first posted January 23, 2017).

Early implant placement versus ridge preservation and delayed implant placement: Analysis of profilometric, clinician- and patient-reported outcomes from a two-centre RCT.

OBJECTIVES: To compare early implant placement (EP) to alveolar ridge preservation and delayed implant placement (ARP/DP) in terms of contour changes, along with clinician- and patient-reported outcome measures (PROMs) until the delivery of the implant-supported restoration. MATERIALS AND METHODS: Patients with a failing single tooth in the maxilla or mandible were recruited in two centres. After tooth extraction, patients were randomly assigned (1:1) to either EP or ARP/DP. At abutment connection and crown delivery, the buccal contour changes at 3 mm below the mucosal margin (primary outcome) along with clinician- (ease of treatment) and patient-reported outcomes were assessed using numeric rating scales and OHIP-14. RESULTS: A total of 46 patients were analysed. The mean buccal contour at abutment connection decreased by -1.2 ± 0.6 mm in group EP and -1.6 ± 0.8 mm in group ARP/DP (estimated mean difference; 0.45 [95%CI, -0.02; 0.94]; p = .061) with no significant differences between the groups. ARP/DP was consistently easier than EP across all stages of the surgery (estimated mean difference; 2.0 [95%CI, 1.3; 2.7] p < .001): during flap elevation (EP: 4.8 vs. ARP/DP: 1.6), implant placement (EP: 5.7 vs. ARP/DP: 2.2) and wound closure (EP: 3.4 vs. ARP/DP: 1.6). Both interventions improved quality of life but patients who underwent ARP/DP were significantly more satisfied at the time of crown delivery (ARP/DP: 9.6 vs. EP: 9.1, p = .02). CONCLUSIONS: EP and ARP/DP show no significant differences in buccal contour changes, aesthetics and patient-reported outcomes. However, ARP/DP is an easier procedure at all stages of the surgery compared to EP and could therefore be the preferred therapy for less experienced clinicians.

Maxillary sinus floor augmentation with autogenous bone graft compared with composite grafts: A one-year single-blinded randomized controlled trial.

OBJECTIVE: The objective was to assess the one year implant treatment outcome and patient-related outcome measures (PROMs) following maxillary sinus floor augmentation (MSFA) with autogenous bone graft (ABG) from the zygomatic buttress (control) compared with 1:1 mixture of ABG and anorganic porcine bone mineral (APBM) (Test I) or biphasic bone graft material (BBGM) (Test II). MATERIALS AND METHODS: Sixty healthy patients (34 females, 26 males) were randomly allocated to either control or test groups. Outcome measures included survival of suprastructures and implants, implant stability quotient, health status of peri-implant tissue, peri-implant marginal bone loss, frequency of complications, and PROMs using Oral Health Impact Profile-14 combined with questionnaire assessing patient perception of peri-implant soft tissue, prosthetic solution, implant function, and implant treatment outcome using visual analogue scale. Mean differences were expressed with standard deviation and 95% confidence interval. Level of significance was .05. RESULTS: All suprastructures and implants were well-functioning after one year of functional implant loading. There was no significant difference between control and test groups in any of the applied outcome measures. The implant stability significantly increased from implant placement to abutment connection within all groups (p < .001). High patient satisfaction and significant improvement in oral health-related quality of life was also reported within all groups. CONCLUSION: This study demonstrates that MSFA with composite grafts containing minimal amounts of ABG reveals comparable implant treatment outcomes as compared with ABG alone, after one year of functional implant loading. Extensive ABG harvesting in conjunction with MSFA therefore seems not to be needed.

Histological and radiological outcome after horizontal guided bone regeneration with bovine bone mineral alone or in combination with bone in edentulous atrophic maxilla: A randomized controlled trial.

OBJECTIVE: To assess the radiological and histological outcome after horizontal guided bone regeneration (GBR) with deproteinized bovine bone mineral (DBBM) alone or in combination with particulate autogenous bone (PAB). MATERIALS AND METHODS: Eighteen edentulous patients with an alveolar ridge of ≤4 mm were included in this split-mouth randomized controlled trial. Horizontal GBR with a graft composition of 100% DBBM (100:0) on one side and 90% DBBM and 10% PAB (90:10) on the other side were conducted in all patients. Cone beam computed tomography (CBCT) was obtained preoperatively, immediately postoperative, and after 10 months of healing. Width and volumetric changes in the alveolar process were measured on CBCT. Implants were placed after 10 months of graft healing where biopsies were obtained for histomorphometrical evaluation. RESULTS: The gained widths were 4.9 (±2.4) mm (100:0) and 4.5 (±2.0) mm (90:10) at 3 mm from the top of the crest, and 5.6 (±1.3) mm (100:0) and 4.6 (±2.1) mm (90:10) at 6 mm from the top of the crest. The mean volumetric reductions were 32.8% (±23.8) (100:0) and 38.2% (±23.2) (90:10). Histomorphometry revealed that mean percentages of bone were 50.8% (±10.7) (100:0) and 46.4% (±11.3) (90:10), DBBM were 31.6% (±12.6) (100:0) and 35.4% (±14.8) (90:10), and non-mineralized tissue were 17.6% (±11.7; 100:0) and 18.2% (±18.2) (90:10). No significant differences were evident between in any evaluated parameters. CONCLUSIONS: There were no additional effects of adding PAB to DBBM regarding bone formation, width changes, or volumetric changes after 10 months of graft healing.

Alveolar Ridge Regeneration With Open Versus Closed Healing in Damaged Extraction Sockets: A Preclinical In Vivo Study.

OBJECTIVE: The objective of this study was to compare open versus closed healing of soft and hard tissue following alveolar ridge preservation (ARP) procedures in damaged extraction sockets. MATERIALS AND METHODS: ARP was performed in five mongrel dogs using collagenated deproteinized bovine bone mineral (cDBBM) and a resorbable non-cross-linked collagen membrane (NCCM) in damaged extraction sockets, with each socket entrance left either open (open group) or closed (closed group). Clinical wound epithelization at the socket entrance and the dimensions of keratinized tissue were evaluated over time. Additionally, the augmented ridge dimensions and new bone formation were assessed radiographically and histologically at 8 weeks after surgery. RESULTS: The dimensions of the socket entrance gradually decreased in the open group, and wound epithelization was almost complete within 4 weeks. The mucogingival junction was maintained more apically in the open group than in the closed group (0.14 ± 0.40 mm vs. -0.86 ± 0.71 mm [mean ± SD], p < 0.05). The augmented ridge dimensions did not differ significantly between the open and closed groups (93.1% ± 5.4% vs. 88.3% ± 11.2%, p > 0.05). Histological analyses revealed no significant differences in the amount of newly formed bone. However, membrane resorption in the crestal region was more pronounced in the open group. CONCLUSION: Open and closed healing approaches for ARP in extraction sockets with damaged buccal wall resulted in similar ridge dimensions and new bone formation. However, there was less reduction of the buccal bone crest and wider keratinized tissue width after open healing.

Healing patterns of alveolar bone following ridge preservation procedures.

OBJECTIVES: Examine the histomorphometric bone composition, following alveolar ridge preservation techniques and unassisted socket healing. MATERIALS AND METHODS: Forty-two patients (42) requiring a single rooted tooth extraction were randomly allocated into three groups (n = 14 per group): Group 1: Guided Bone Regeneration (GBR) using deproteinised bovine bone mineral (DBBM) and a porcine collagen membrane; Group 2: Socket Seal (SS) technique using DBBM and a porcine collagen matrix; Group 3: Unassisted socket healing (Control). Trephined bone biopsies were harvested following a 4-month healing period. Forty-two samples underwent Back-Scattered Electrons -Scanning Electron Microscopy (BSE-SEM) imaging, with 15 samples examined using Xray Micro-Tomography (XMT) (n = 6 for each GBR/SS and n = 3 Control). Images were analysed to determine the percentage (%) of connective tissue, new bone formation, residual DBBM particles and direct bone to DBBM particle contact (osseointegration). RESULTS: BSE-SEM analysis demonstrated that new bone formation was higher in the Control (45.89% ± 11.48) compared to both GBR (22.12% ± 12.7/p < .004) and SS (27.62% ± 17.76/p < .005) groups. The connective tissue percentage in GBR (49.72% ± 9), SS (47.81% ± 12.57) and Control (47.81% ± 12.57) groups was similar. GBR (28.17% ± 16.64) and SS (24.37% ± 18.61) groups had similar levels of residual DBBM particles. XMT volumetric analysis indicated a lower level of bone and DBBM particles in all test groups, when matched to the BSE-SEM area measurements. Osseointegration levels (DBBM graft and bone) were recorded at 35.66% (± 9.8) for GBR and 31.18% (± 19.38) for SS. CONCLUSION: GBR and SS ARP techniques presented with less bone formation when compared to unassisted healing. GBR had more direct contact/osseointegration between the DBBM particles and newly formed bone.

Digital planning and bone regenerative technologies: A narrative review.

OBJECTIVES: The aim of this narrative review was to explore the application of digital technologies (DT) for the simplification and improvement of bone augmentation procedures in advanced implant dentistry. MATERIAL AND METHODS: A search on electronic databases was performed to identify systematic reviews, meta-analyses, randomized and non-randomized controlled trials, prospective/retrospective case series, and case reports related to the application of DT in advanced implant dentistry. RESULTS: Seventy-nine articles were included. Potential fields of application of DT are the following: 1) the use of intra-oral scanners for the definition of soft tissue profile and the residual dentition; 2) the use of dental lab CAD (computer-aided design) software to create a digital wax-up replicating the ideal ridge and tooth morphology; 3) the matching of STL (Standard Triangulation Language) files with DICOM (DIgital COmmunication in Medicine) files from CBCTs with a dedicated software; 4) the production of stereolithographic 3D models reproducing the jaws and the bone defects; 5) the creation of surgical templates to guide implant placement and augmentation procedures; 6) the production of customized meshes for bone regeneration; and 7) the use of static or dynamic computer-aided implant placement. CONCLUSIONS: Results from this narrative review seem to demonstrate that the use of a partially or fully digital workflow can be successfully used also in advanced implant dentistry. However, the number of studies (in particular RCTs) focused on the use of a fully digital workflow in advanced implant dentistry is still limited and more studies are needed to properly evaluate the potentials of DT.