Design and Implementation of a Low-Cost Intelligent Unmanned Surface Vehicle.

This article describes the design and construction journey of a self-developed unmanned surface vehicle (USV). In order to increase the accessibility and lower the barrier of entry we propose a low-cost (under EUR 1000) approach to the vessel construction with great adaptability and customizability. This design prioritizes minimal power consumption as a key objective. It focuses on elucidating the intricacies of both the design and assembly processes involved in creating an economical USV. Utilizing easily accessible components, the boat outlined in this study has been already participated in the 1st Aegean Ro-boat Race 2023 competition and is tailored for entry into similar robotic competitions. Its primary functionalities encompass autonomous sea navigation coupled with sophisticated collision avoidance capabilities. Finally, we studied reinforcement learning strategies for constructing a robust intelligent controller for the task of USV navigation under disturbances and we show some preliminary simulation results we have obtained.

A Planar Multi-Inertial Navigation Strategy for Autonomous Systems for Signal-Variable Environments.

The challenge of precise dynamic positioning for mobile robots is addressed through the development of a multi-inertial navigation system (M-INSs). The inherent cumulative sensor errors prevalent in traditional single inertial navigation systems (INSs) under dynamic conditions are mitigated by a novel algorithm, integrating multiple INS units in a predefined planar configuration, utilizing fixed distances between the units as invariant constraints. An extended Kalman filter (EKF) is employed to significantly enhance the positioning accuracy. Dynamic experimental validation of the proposed 3INS EKF algorithm reveals a marked improvement over individual INS units, with the positioning errors reduced and stability increased, resulting in an average accuracy enhancement rate exceeding 60%. This advancement is particularly critical for mobile robot applications that demand high precision, such as autonomous driving and disaster search and rescue. The findings from this study not only demonstrate the potential of M-INSs to improve dynamic positioning accuracy but also to provide a new research direction for future advancements in robotic navigation systems.

Fast 50 Hz Updated Static Infrared Positioning System Based on Triangulation Method.

One of the important issues being explored in Industry 4.0 is collaborative mobile robots. This collaboration requires precise navigation systems, especially indoor navigation systems where GNSS (Global Navigation Satellite System) cannot be used. To enable the precise localization of robots, different variations of navigation systems are being developed, mainly based on trilateration and triangulation methods. Triangulation systems are distinguished by the fact that they allow for the precise determination of an object's orientation, which is important for mobile robots. An important feature of positioning systems is the frequency of position updates based on measurements. For most systems, it is 10-20 Hz. In our work, we propose a high-speed 50 Hz positioning system based on the triangulation method with infrared transmitters and receivers. In addition, our system is completely static, i.e., it has no moving/rotating measurement sensors, which makes it more resistant to disturbances (caused by vibrations, wear and tear of components, etc.). In this paper, we describe the principle of the system as well as its design. Finally, we present tests of the built system, which show a beacon bearing accuracy of Δφ = 0.51°, which corresponds to a positioning accuracy of ΔR = 6.55 cm, with a position update frequency of fupdate = 50 Hz.

Tuning the Proportional-Integral-Derivative Control Parameters of Unmanned Aerial Vehicles Using Artificial Neural Networks for Point-to-Point Trajectory Approach.

Nowadays, trajectory control is a significant issue for unmanned micro aerial vehicles (MAVs) due to large disturbances such as wind and storms. Trajectory control is typically implemented using a proportional-integral-derivative (PID) controller. In order to achieve high accuracy in trajectory tracking, it is essential to set the PID gain parameters to optimum values. For this reason, separate gain values are set for roll, pitch and yaw movements before autonomous flight in quadrotor systems. Traditionally, this adjustment is performed manually or automatically in autotune mode. Given the constraints of narrow orchard corridors, the use of manual or autotune mode is neither practical nor effective, as the quadrotor system has to fly in narrow apple orchard corridors covered with hail nets. These reasons require the development of an innovative solution specific to quadrotor vehicles designed for constrained areas such as apple orchards. This paper recognizes the need for effective trajectory control in quadrotors and proposes a novel neural network-based approach to tuning the optimal PID control parameters. This new approach not only improves trajectory control efficiency but also addresses the unique challenges posed by environments with constrained locational characteristics. Flight simulations using the proposed neural network models have demonstrated successful trajectory tracking performance and highlighted the superiority of the feed-forward back propagation network (FFBPN), especially in latitude tracking within 7.52745 × 10-5 RMSE trajectory error. Simulation results support the high performance of the proposed approach for the development of automatic flight capabilities in challenging environments.

Integrating Cosmic Microwave Background Readings with Celestial Navigation to Enhance Deep Space Navigation.

This research unveils a cutting-edge navigation system for deep space missions that utilizes cosmic microwave background (CMB) sensor readings to enhance spacecraft positioning and velocity estimation accuracy significantly. By exploiting the Doppler-shifted CMB spectrum and integrating it with optical measurements for celestial navigation, this approach employs advanced data processing through the Unscented Kalman Filter (UKF), enabling precise navigation amid the complexities of space travel. The simulation results confirm the system's exceptional precision and resilience in deep space missions, marking a significant advancement in astronautics and paving the way for future space exploration endeavors.

Autonomous Navigation by Mobile Robot with Sensor Fusion Based on Deep Reinforcement Learning.

In the domain of mobile robot navigation, conventional path-planning algorithms typically rely on predefined rules and prior map information, which exhibit significant limitations when confronting unknown, intricate environments. With the rapid evolution of artificial intelligence technology, deep reinforcement learning (DRL) algorithms have demonstrated considerable effectiveness across various application scenarios. In this investigation, we introduce a self-exploration and navigation approach based on a deep reinforcement learning framework, aimed at resolving the navigation challenges of mobile robots in unfamiliar environments. Firstly, we fuse data from the robot's onboard lidar sensors and camera and integrate odometer readings with target coordinates to establish the instantaneous state of the decision environment. Subsequently, a deep neural network processes these composite inputs to generate motion control strategies, which are then integrated into the local planning component of the robot's navigation stack. Finally, we employ an innovative heuristic function capable of synthesizing map information and global objectives to select the optimal local navigation points, thereby guiding the robot progressively toward its global target point. In practical experiments, our methodology demonstrates superior performance compared to similar navigation methods in complex, unknown environments devoid of predefined map information.

Real-Time Object Detection for Autonomous Solar Farm Inspection via UAVs.

Robotic missions for solar farm inspection demand agile and precise object detection strategies. This paper introduces an innovative keypoint-based object detection framework specifically designed for real-time solar farm inspections with UAVs. Moving away from conventional bounding box or segmentation methods, our technique focuses on detecting the vertices of solar panels, which provides a richer granularity than traditional approaches. Drawing inspiration from CenterNet, our architecture is optimized for embedded platforms like the NVIDIA AGX Jetson Orin, achieving close to 60 FPS at a resolution of 1024 ×1376 pixels, thus outperforming the camera's operational frequency. Such a real-time capability is essential for efficient robotic operations in time-critical industrial asset inspection environments. The design of our model emphasizes reduced computational demand, positioning it as a practical solution for real-world deployment. Additionally, the integration of active learning strategies promises a considerable reduction in annotation efforts and strengthens the model's operational feasibility. In summary, our research emphasizes the advantages of keypoint-based object detection, offering a practical and effective approach for real-time solar farm inspections with UAVs.

Improved Hybrid Model for Obstacle Detection and Avoidance in Robot Operating System Framework (Rapidly Exploring Random Tree and Dynamic Windows Approach).

The integration of machine learning and robotics brings promising potential to tackle the application challenges of mobile robot navigation in industries. The real-world environment is highly dynamic and unpredictable, with increasing necessities for efficiency and safety. This demands a multi-faceted approach that combines advanced sensing, robust obstacle detection, and avoidance mechanisms for an effective robot navigation experience. While hybrid methods with default robot operating system (ROS) navigation stack have demonstrated significant results, their performance in real time and highly dynamic environments remains a challenge. These environments are characterized by continuously changing conditions, which can impact the precision of obstacle detection systems and efficient avoidance control decision-making processes. In response to these challenges, this paper presents a novel solution that combines a rapidly exploring random tree (RRT)-integrated ROS navigation stack and a pre-trained YOLOv7 object detection model to enhance the capability of the developed work on the NAV-YOLO system. The proposed approach leveraged the high accuracy of YOLOv7 obstacle detection and the efficient path-planning capabilities of RRT and dynamic windows approach (DWA) to improve the navigation performance of mobile robots in real-world complex and dynamically changing settings. Extensive simulation and real-world robot platform experiments were conducted to evaluate the efficiency of the proposed solution. The result demonstrated a high-level obstacle avoidance capability, ensuring the safety and efficiency of mobile robot navigation operations in aviation environments.

Spatial and Temporal Hierarchy for Autonomous Navigation Using Active Inference in Minigrid Environment.

Robust evidence suggests that humans explore their environment using a combination of topological landmarks and coarse-grained path integration. This approach relies on identifiable environmental features (topological landmarks) in tandem with estimations of distance and direction (coarse-grained path integration) to construct cognitive maps of the surroundings. This cognitive map is believed to exhibit a hierarchical structure, allowing efficient planning when solving complex navigation tasks. Inspired by human behaviour, this paper presents a scalable hierarchical active inference model for autonomous navigation, exploration, and goal-oriented behaviour. The model uses visual observation and motion perception to combine curiosity-driven exploration with goal-oriented behaviour. Motion is planned using different levels of reasoning, i.e., from context to place to motion. This allows for efficient navigation in new spaces and rapid progress toward a target. By incorporating these human navigational strategies and their hierarchical representation of the environment, this model proposes a new solution for autonomous navigation and exploration. The approach is validated through simulations in a mini-grid environment.

Bioinspired sonar reflectors as guiding beacons for autonomous navigation.

Sonar sensors are universally applied in autonomous vehicles such as robots and driverless cars as they are inexpensive, energy-efficient, and provide accurate range measurements; however, they have some limitations. Their measurements can lead to ambiguous estimates and echo clutter can hamper target detection. In nature, echolocating bats experience similar problems when searching for food, especially if their food source is close to vegetation, as is the case for gleaning bats and nectar-feeding bats. However, nature has come up with solutions to overcome clutter problems and acoustically guide bats. Several bat-pollinated plants have evolved specially shaped floral parts that act as sonar reflectors, making the plants acoustically conspicuous. Here we show that artificial sonar beacons inspired by floral shapes streamline the navigation efficacy of sonar-guided robot systems. We developed floral-inspired reflector forms and demonstrate their functionality in 2 proof-of-principle experiments. First we show that the reflectors are easily recognized among dense clutter, and second we show that it is possible to discern different reflector shapes and use this identification to guide a robot through an unfamiliar environment. Bioinspired sonar reflectors could have a wide range of applications that could significantly advance sonar-guided systems.

The Control Method of Autonomous Flight Avoidance Barriers of UAVs in Confined Environments.

This paper proposes an improved 3D-Vector Field Histogram (3D-VFH) algorithm for autonomous flight and local obstacle avoidance of multi-rotor unmanned aerial vehicles (UAVs) in a confined environment. Firstly, the method employs a target point coordinate system based on polar coordinates to convert the point cloud data, considering that long-range point cloud information has no effect on local obstacle avoidance by UAVs. This enables UAVs to effectively utilize obstacle information for obstacle avoidance and improves the real-time performance of the algorithm. Secondly, a sliding window algorithm is used to estimate the optimal flight path of the UAV and implement obstacle avoidance control, thereby maintaining the attitude stability of the UAV during obstacle avoidance flight. Finally, experimental analysis is conducted, and the results show that the UAV has good attitude stability during obstacle avoidance flight, can autonomously follow the expected trajectory, and can avoid dynamic obstacles, achieving precise obstacle avoidance.

Research on the Relative Position Detection Method between Orchard Robots and Fruit Tree Rows.

The relative position of the orchard robot to the rows of fruit trees is an important parameter for achieving autonomous navigation. The current methods for estimating the position parameters between rows of orchard robots obtain low parameter accuracy. To address this problem, this paper proposes a machine vision-based method for detecting the relative position of orchard robots and fruit tree rows. First, the fruit tree trunk is identified based on the improved YOLOv4 model; second, the camera coordinates of the tree trunk are calculated using the principle of binocular camera triangulation, and the ground projection coordinates of the tree trunk are obtained through coordinate conversion; finally, the midpoints of the projection coordinates of different sides are combined, the navigation path is obtained by linear fitting with the least squares method, and the position parameters of the orchard robot are obtained through calculation. The experimental results show that the average accuracy and average recall rate of the improved YOLOv4 model for fruit tree trunk detection are 5.92% and 7.91% higher, respectively, than those of the original YOLOv4 model. The average errors of heading angle and lateral deviation estimates obtained based on the method in this paper are 0.57° and 0.02 m. The method can accurately calculate heading angle and lateral deviation values at different positions between rows and provide a reference for the autonomous visual navigation of orchard robots.

Hardware Efficient Direct Policy Imitation Learning for Robotic Navigation in Resource-Constrained Settings.

Direct policy learning (DPL) is a widely used approach in imitation learning for time-efficient and effective convergence when training mobile robots. However, using DPL in real-world applications is not sufficiently explored due to the inherent challenges of mobilizing direct human expertise and the difficulty of measuring comparative performance. Furthermore, autonomous systems are often resource-constrained, thereby limiting the potential application and implementation of highly effective deep learning models. In this work, we present a lightweight DPL-based approach to train mobile robots in navigational tasks. We integrated a safety policy alongside the navigational policy to safeguard the robot and the environment. The approach was evaluated in simulations and real-world settings and compared with recent work in this space. The results of these experiments and the efficient transfer from simulations to real-world settings demonstrate that our approach has improved performance compared to its hardware-intensive counterparts. We show that using the proposed methodology, the training agent achieves closer performance to the expert within the first 15 training iterations in simulation and real-world settings.

A Method for Autonomous Generation of High-Precision Time Scales for Navigation Constellations.

The time maintenance accuracy of the navigation constellation determines the user positioning and timing performance. Especially in autonomous operation scenarios, the performance of navigation constellation maintenance time directly affects the duration of constellation autonomous navigation. Among them, the frequency stability of the atomic clock onboard the navigation satellite is a key factor. In order to further improve the stability of the navigation constellation time-frequency system, combined with the development of high-precision inter-satellite link measurement technology, the idea of constructing constellation-level synthetic atomic time has gradually become the development trend of major GNSS systems. This paper gives a navigation constellation time scale generation framework, and designs an improved Kalman plus weights (KPW) time scale algorithm and time-frequency steer algorithm that integrates genetic algorithms. Finally, a 30-day autonomous timekeeping simulation was carried out using the GPS precision clock data provided by CODE, when the sampling interval is 300 s, the Allan deviation of the output time scale is 5.73 × 10-14, a 71% improvement compared with the traditional KPW time scale algorithm; when the sampling interval is 1 day, the Allan deviation is 9.17 × 10-15; when the sampling interval is 1 × 106 s, the Allan deviation is 8.87 × 10-16, a 94% improvement compared with the traditional KPW time scale algorithm. The constellation-level high-precision time scale generation technology proposed in this paper can significantly improve the stability performance of navigation constellation autonomous timekeeping.

ROS-Based Autonomous Navigation Robot Platform with Stepping Motor.

Indoor navigation robots, which have been developed using a robot operating system, typically use a direct current motor as a motion actuator. Their control algorithm is generally complex and requires the cooperation of sensors such as wheel encoders to correct errors. For this study, an autonomous navigation robot platform named Owlbot was designed, which is equipped with a stepping motor as a mobile actuator. In addition, a stepping motor control algorithm was developed using polynomial equations, which can effectively convert speed instructions to generate control signals for accurately operating the motor. Using 2D LiDAR and an inertial measurement unit as the primary sensors, simultaneous localization, mapping, and autonomous navigation are realised based on the particle filtering mapping algorithm. The experimental results show that Owlbot can effectively map the unknown environment and realise autonomous navigation through the proposed control algorithm, with a maximum movement error being smaller than 0.015 m.

JUNO Project: Deployment and Validation of a Low-Cost Cloud-Based Robotic Platform for Reliable Smart Navigation and Natural Interaction with Humans in an Elderly Institution.

This paper describes the main results of the JUNO project, a proof of concept developed in the Region of Murcia in Spain, where a smart assistant robot with capabilities for smart navigation and natural human interaction has been developed and deployed, and it is being validated in an elderly institution with real elderly users. The robot is focused on helping people carry out cognitive stimulation exercises and other entertainment activities since it can detect and recognize people, safely navigate through the residence, and acquire information about attention while users are doing the mentioned exercises. All the information could be shared through the Cloud, if needed, and health professionals, caregivers and relatives could access such information by considering the highest standards of privacy required in these environments. Several tests have been performed to validate the system, which combines classic techniques and new Deep Learning-based methods to carry out the requested tasks, including semantic navigation, face detection and recognition, speech to text and text to speech translation, and natural language processing, working both in a local and Cloud-based environment, obtaining an economically affordable system. The paper also discusses the limitations of the platform and proposes several solutions to the detected drawbacks in this kind of complex environment, where the fragility of users should be also considered.

A Comparison Study between Traditional and Deep-Reinforcement-Learning-Based Algorithms for Indoor Autonomous Navigation in Dynamic Scenarios.

At the beginning of a project or research that involves the issue of autonomous navigation of mobile robots, a decision must be made about working with traditional control algorithms or algorithms based on artificial intelligence. This decision is not usually easy, as the computational capacity of the robot, the availability of information through its sensory systems and the characteristics of the environment must be taken into consideration. For this reason, this work focuses on a review of different autonomous-navigation algorithms applied to mobile robots, from which the most suitable ones have been identified for the cases in which the robot must navigate in dynamic environments. Based on the identified algorithms, a comparison of these traditional and DRL-based algorithms was made, using a robotic platform to evaluate their performance, identify their advantages and disadvantages and provide a recommendation for their use, according to the development requirements of the robot. The algorithms selected were DWA, TEB, CADRL and SAC, and the results show that-according to the application and the robot's characteristics-it is recommended to use each of them, based on different conditions.

Bio-Inspired Autonomous Navigation and Formation Controller for Differential Mobile Robots.

This article proposes a decentralized controller for differential mobile robots, providing autonomous navigation and obstacle avoidance by enforcing a formation toward trajectory tracking. The control system relies on dynamic modeling, which integrates evasion forces from obstacles, formation forces, and path-following forces. The resulting control loop can be seen as a dynamic extension of the kinematic model for the differential mobile robot, producing linear and angular velocities fed to the mobile robot's kinematic model and thus passed to the low-level wheel controller. Using the Lyapunov method, the closed-loop stability is proven for the non-collision case. Experimental and simulated results that support the stability analysis and the performance of the proposed controller are shown.

Research and Implementation of Autonomous Navigation for Mobile Robots Based on SLAM Algorithm under ROS.

Aiming at the problems of low mapping accuracy, slow path planning efficiency, and high radar frequency requirements in the process of mobile robot mapping and navigation in an indoor environment, this paper proposes a four-wheel drive adaptive robot positioning and navigation system based on ROS. By comparing and analyzing the mapping effects of various 2D-SLAM algorithms (Gmapping, Karto SLAM, and Hector SLAM), the Karto SLAM algorithm is used for map building. By comparing the Dijkstra algorithm with the A* algorithm, the A* algorithm is used for heuristic searches, which improves the efficiency of path planning. The DWA algorithm is used for local path planning, and real-time path planning is carried out by combining sensor data, which have a good obstacle avoidance performance. The mathematical model of four-wheel adaptive robot sliding steering was established, and the URDF model of the mobile robot was established under a ROS system. The map environment was built in Gazebo, and the simulation experiment was carried out by integrating lidar and odometer data, so as to realize the functions of mobile robot scanning mapping and autonomous obstacle avoidance navigation. The communication between the ROS system and STM32 is realized, the packaging of the ROS chassis node is completed, and the ROS chassis node has the function of receiving speed commands and feeding back odometer data and TF transformation, and the slip rate of the four-wheel robot in situ steering is successfully measured, making the chassis pose more accurate. Simulation tests and experimental verification show that the system has a high precision in environment map building and can achieve accurate navigation tasks.

RL-DOVS: Reinforcement Learning for Autonomous Robot Navigation in Dynamic Environments.

Autonomous navigation in dynamic environments where people move unpredictably is an essential task for service robots in real-world populated scenarios. Recent works in reinforcement learning (RL) have been applied to autonomous vehicle driving and to navigation around pedestrians. In this paper, we present a novel planner (reinforcement learning dynamic object velocity space, RL-DOVS) based on an RL technique for dynamic environments. The method explicitly considers the robot kinodynamic constraints for selecting the actions in every control period. The main contribution of our work is to use an environment model where the dynamism is represented in the robocentric velocity space as input to the learning system. The use of this dynamic information speeds the training process with respect to other techniques that learn directly either from raw sensors (vision, lidar) or from basic information about obstacle location and kinematics. We propose two approaches using RL and dynamic obstacle velocity (DOVS), RL-DOVS-A, which automatically learns the actions having the maximum utility, and RL-DOVS-D, in which the actions are selected by a human driver. Simulation results and evaluation are presented using different numbers of active agents and static and moving passive agents with random motion directions and velocities in many different scenarios. The performance of the technique is compared with other state-of-the-art techniques for solving navigation problems in environments such as ours.