An Improved Network Time Protocol for Industrial Internet of Things.

In the industrial Internet of Things, the network time protocol (NTP) can be used for time synchronization, allowing machines to run in sync so that machines can take critical actions within 1 ms. However, the commonly used NTP mechanism does not take into account that the network packet travel time over a link is time-varying, which causes the NTP to make incorrect synchronization decisions. Therefore, this paper proposed a low-cost modification to NTP with clock skew compensation and adaptive clock adjustment, so that the clock difference between the NTP client and NTP server can be controlled within 1 ms in the wired network environment. The adaptive clock adjustment skips the clock offset calculation when the NTP packet run trip time (RTT) exceeds a certain threshold. The clock skew compensation addresses the inherent issue that different clocks (or oscillators) naturally drift away from each other. Both adaptive clock adjustment and clock skew compensation are environment dependent and device dependent. The measurement result in our experimental environment shows that the when the RTT threshold is set at 1.7 ms, the best synchronization accuracy is achieved.

Energy-Efficient Time Synchronization Based on Nonlinear Clock Skew Tracking for Underwater Acoustic Networks.

Time synchronization plays an important role in the scheduling and position technologies of sensor nodes in underwater acoustic networks (UANs). The time synchronization (TS) algorithms face challenges such as high requirements of energy efficiency, the estimation accuracy of the time-varying clock skew and the suppression of the impulsive noise. To achieve accurate time synchronization for UANs, an energy-efficient TS method based on nonlinear clock skew tracking (NCST) is proposed. First, based on the sea trial temperature data and the crystal oscillators' temperature-frequency characteristics, a nonlinear model is established to characterize the dynamic of clock skews. Second, a single-way communication scheme based on a receiver-only (RO) paradigm is used in the NCST-TS to save limited energy. Meanwhile, impulsive noises are considered during the communication process and the Gaussian mixture model (GMM) is employed to fit receiving timestamp errors caused by non-Gaussian noise. To combat the nonlinear and non-Gaussian problem, the particle filter (PF)-based algorithm is used to track the time-varying clock state and an accurate posterior probability density function under the GMM error model is also given in PF. The simulation results show that under the GMM error model, the accumulative Root Mean Square Errors (RMSE) of NCST-TS can be reduced from 10-4 s to 10-5 s compared with existing protocols. It also outperforms the other TS algorithms in the aspect of energy efficiency.

Node-Identification-Based Secure Time Synchronization in Industrial Wireless Sensor Networks.

Time synchronization is critical for wireless sensors networks in industrial automation, e.g., event detection and process control of industrial plants and equipment need a common time reference. However, cyber-physical attacks are enormous threats causing synchronization protocols to fail. This paper studies the algorithm design and analysis in secure time synchronization for resource-constrained industrial wireless sensor networks under Sybil attacks, which cannot be well addressed by existing methods. A node-identification-based secure time synchronization (NiSTS) protocol is proposed. The main idea of this protocol is to utilize the timestamp correlation among different nodes and the uniqueness of a node's clock skew to detect invalid information rather than isolating suspicious nodes. In the detection process, each node takes the relative skew with respect to its public neighbor as the basis to determine whether the information is reliable and to filter invalid information. The information filtering mechanism renders NiSTS resistant to Sybil attacks and message manipulation attacks. As a completely distributed protocol, NiSTS is not sensitive to the number of Sybil attackers. Extensive simulations were conducted to demonstrate the efficiency of NiSTS and compare it with existing protocols.

Homomorphic Filtering for Improving Time Synchronization in Wireless Networks.

Wireless sensor networks are used to sample the environment in a distributed way. Therefore, it is mandatory for all of the measurements to be tightly synchronized in order to guarantee that every sensor is sampling the environment at the exact same instant of time. The synchronization drift gets bigger in environments suffering from temperature variations. Thus, this work is focused on improving time synchronization under deployments with temperature variations. The working hypothesis demonstrated in this work is that the clock skew of two nodes (the ratio of the real frequencies of the oscillators) is composed of a multiplicative combination of two main components: the clock skew due to the variations between the cut of the crystal of each oscillator and the clock skew due to the different temperatures affecting the nodes. By applying a nonlinear filtering, the homomorphic filtering, both components are separated in an effective way. A correction factor based on temperature, which can be applied to any synchronization protocol, is proposed. For testing it, an improvement of the FTSP synchronization protocol has been developed and physically tested under temperature variation scenarios using TelosB motes flashed with the IEEE 802.15.4 implementation supplied by TinyOS.

Clock synchronization in wireless sensor networks: an overview.

The development of tiny, low-cost, low-power and multifunctional sensor nodes equipped with sensing, data processing, and communicating components, have been made possible by the recent advances in micro-electro-mechanical systems (MEMS) technology. Wireless sensor networks (WSNs) assume a collection of such tiny sensing devices connected wirelessly and which are used to observe and monitor a variety of phenomena in the real physical world. Many applications based on these WSNs assume local clocks at each sensor node that need to be synchronized to a common notion of time. This paper reviews the existing clock synchronization protocols for WSNs and the methods of estimating clock offset and clock skew in the most representative clock synchronization protocols for WSNs.