Electrospun PAN-HNTs composite nanofiber membranes for efficient electrostatic capture of particulate matters.

The fine particulate matter (PM) pollution has become a serious concern to public health. As the core part of PM air filters, high-performance electrostatic nanofiber membranes are urgently needed. However, the existing air filters remain challenging to further decrease the pressure drop to improve the wearer comfort. On the other hand, the rapidly disappearing static electricity of the existing electrostatic nanofiber inevitably gives rise to a relatively short service life. Here, we demonstrate a novel and enhanced electrostatic nanofiber membrane by introducing the halloysite nanotubes (HNTs) to the traditional electrospun PAN nanofiber membrane. The optimal PAN-HNTs nanofiber membrane shows a high removal efficiency of 99.54%, a low pressure drop of 39 Pa, and a high quality factor of 0.89 Pa-1. This greatly improved filtration performance can be attributed to the increased surface area and diameter of nanofiber after introducing the HNTs as additives with suitable doping concentrations. More importantly, compared with the pure PAN nanofiber membrane, the electrostatic capacity of the PAN-HNTs nanofiber membrane is significantly enhanced, which is confirmed by the leaf electroscope. After introducing the HNTs as additives, the surface of the PAN-HNTs nanofiber membrane becomes hydrophilic, which benefits for preventing foulants from attaching to the surface. We anticipate that the PAN-HNTs nanofibers as high-performance membrane air filters will bring great benefits to public health.

Preparation and Characterization of Tilapia Collagen-Thermoplastic Polyurethane Composite Nanofiber Membranes.

Marine collagen is an ideal material for tissue engineering due to its excellent biological properties. However, the limited mechanical properties and poor stability of marine collagen limit its application in tissue engineering. Here, collagen was extracted from the skin of tilapia (Oreochromis nilotica). Collagen-thermoplastic polyurethane (Col-TPU) fibrous membranes were prepared using tilapia collagen as a foundational material, and their physicochemical and biocompatibility were investigated. Fourier transform infrared spectroscopy results showed that thermoplastic polyurethane was successfully combined with collagen, and the triple helix structure of collagen was retained. X-ray diffraction and differential scanning calorimetry results showed relatively good compatibility between collagen and TPU.SEM results showed that the average diameter of the composite nanofiber membrane decreased with increasing thermoplastic polyurethane proportion. The mechanical evaluation and thermogravimetric analysis showed that the thermal stability and tensile properties of Col-TPU fibrous membranes were significantly improved with increasing TPU. Cytotoxicity experiments confirmed that fibrous membranes with different ratios of thermoplastic polyurethane content showed no significant toxicity to fibroblasts; Col-TPU fibrous membranes were conducive to the migration and adhesion of cells. Thus, these Col-TPU composite nanofiber membranes might be used as a potential biomaterial in tissue regeneration.

Preparation and Characterization of Simvastatin-Loaded PCL/PEG Nanofiber Membranes for Drug Sustained Release.

Simvastatin (SIM) particles are liposoluble drugs with large particle sizes, resulting in poor compatibility with electrospun polycaprolactone (PCL)/polyethylene glycol (PEG) nanofibers, so that part of them will be exposed to the electrospun nanofiber surface, which is easy to cause the burst release of drugs. Therefore, in this paper, stearic acid (SA) with good biocompatibility was innovatively added to increase the dispersion uniformity of SIM in the spinning solution, thus improving the performances of SIM-loaded PCL/PEG nanofiber membranes (NFMs). Accordingly, the effects of SA addition on the morphologies, mechanical properties, wettability, and drug release properties of the SIM-loaded NFMs were studied. The results showed that after SIM was dissolved in SA solution, the particle size of SIM was significantly reduced and could be evenly dispersed in the polymer spinning solution, thus obtaining the SIM-loaded composite NFMs with the best morphology and performance.

Novel covalent organic frameworks based electrospun composite nanofiber membranes as pipette-tip strong anion exchange sorbent for determination of inorganic arsenic in rice.

Novel covalent organic frameworks (COFs) based PAN@TpBD(NH2)2 electrospun composite nanofiber membranes (ECNMs) were fabricated as strong anion exchange sorbent by implementing electrospinning technology. The finished sorbent was characterized, and key parameters of pipette-tip solid phase extraction (PTSPE) procedures were investigated. Inorganic arsenic (iAs) was successfully separated from rice under the optimal precondition conditions, and quantified by hydride generation-atomic fluorescence spectrometry (HG-AFS). This PTSPE-HG-AFS methodology achieved 0.015 µg L-1 detection limit, 4.67 % relative standard deviation, and 86.48～99.11 % recoveries. In this work, preparation and characterization of this novel COFs-based anion exchange sorbent, PAN@TpBD(NH2)2 ECNMs, is described and its suitability for PTSPE applications is demonstrated.

Porous Carbon Nanofiber Flexible Membranes via a Bottlebrush Copolymer Template for Enhanced High-Performance Supercapacitors.

We report a method to construct ordered hierarchical porous structures in carbon nanofiber membranes using poly(ethylene oxide)-block-polydimethylsiloxane bottlebrush block copolymers (BBCPs) as templates. The BBCPs self-assemble into a spherical morphology driven by small-molecule hydrogen bond donors which act as bridges between carbon precursors and templates to promote uniform dispersion of the templates. We successfully obtained flexible, self-supporting, and porous carbon nanofiber membranes (PCNFs) with high porosity. Then, a supercapacitor electrode was independently prepared using PCNFs as an active substance without infiltrating any conductive agents or binders. The PCNFs exhibit excellent performance with a capacitance of 234.1 F g-1 at a current density of 1 A g-1 owing to the abundant hierarchical porous structures and high content of nitrogen and oxygen elements internally. The aqueous symmetric supercapacitor prepared using PCNFs electrodes maintains more than 95% capacitance retention after 55,000 charge-discharge cycles. Furthermore, the capacitance retention reaches up to 67.72% at a current density of 50 A g-1 (compared to 1 A g-1), exhibiting excellent cycling stability and rate capability. Based on the excellent electrochemical performance and flexible self-supporting ability of PCNFs, this work is expected to facilitate the development of flexible displays, flexible sensors, wearable devices, and electrocatalysis.