Nanopipette dynamic microscopy unveils nano coffee ring.

Liquid-phase electron microscopy (LP-EM) imaging has revolutionized our understanding of nanosynthesis and assembly. However, the current closed geometry limits its application for open systems. The ubiquitous physical process of the coffee-ring phenomenon that underpins materials and engineering science remains elusive at the nanoscale due to the lack of experimental tools. We introduce a quartz nanopipette liquid cell with a tunable dimension that requires only standard microscopes. Depending on the imaging condition, the open geometry of the nanopipette allows the imaging of evaporation-induced pattern formation, but it can also function as an ordinary closed-geometry liquid cell where evaporation is negligible despite the nano opening. The nano coffee-ring phenomenon was observed by tracking individual nanoparticles in an evaporating nanodroplet created from a thin liquid film by interfacial instability. Nanoflows drive the assembly and disruption of a ring pattern with the absence of particle-particle correlations. With surface effects, nanoflows override thermal fluctuations at tens of nanometers, in which nanoparticles displayed a "drunken man trajectory" and performed work at a value much smaller than kBT.

Temperature protocols to guide selective self-assembly of competing structures.

Multicomponent self-assembly mixtures offer the possibility of encoding multiple target structures with the same set of interacting components. Selective retrieval of one of the stored structures has been attempted by preparing an initial state that favors the assembly of the required target, through seeding, concentration patterning, or specific choices of interaction strengths. This may not be possible in an experiment where on-the-fly reconfiguration of the building blocks to switch functionality may be required. In this paper, we explore principles of inverse design of a multicomponent, self-assembly mixture capable of encoding two competing structures that can be selected through simple temperature protocols. We design the target structures to realize the generic situation in which one of the targets has the lower nucleation barrier, while the other is globally more stable. We observe that, to avoid the formation of spurious or chimeric aggregates, the number of neighboring component pairs that occur in both structures should be minimal. Our design also requires the inclusion of components that are part of only one of the target structures. We observe, however, that to maximize the selectivity of retrieval, the component library itself should be maximally shared by the two targets, within such a constraint. We demonstrate that temperature protocols can be designed that lead to the formation of either one of the target structures with high selectivity. We discuss the important role played by secondary aggregation products in improving selectivity, which we term "vestigial aggregates."

Electric-Field-Driven Localization of Molecular Nanowires in Wafer-Scale Nanogap Electrodes.

As integrated circuits continue to scale toward the atomic limit, bottom-up processes, such as epitaxial growth, have come to feature prominently in their fabrication. At the same time, chemistry has developed highly tunable molecular semiconductors that can perform the functions of ultimately scaled circuit components. Hybrid techniques that integrate programmable structures comprising molecular components into devices however are sorely lacking. Here we demonstrate a wafer-scale process that directs the localization of a conductive polymer, Mw = 20 kg mol-1 polyaniline, from dilute solutions into 50 nm vertical nanogap device architectures using electric-field-driven self-assembly. The resulting metal-polymer-metal junctions were characterized by electron microscopy, Raman spectroscopy and transport measurements demonstrating that our technique is highly selective, assembling conductive polymers only in electrically activated nanogaps. Our results represent a step toward scalable hybrid nanoelectronics that seamlessly integrate established lithographic top-down fabrication with bottom-up synthesized molecular functional circuit components.

DNA-Directed Assembly of Hierarchical MOF-Cellulose Nanofiber Microbioreactors with "Branch-Fruit" Structures.

Assembling metal-organic frameworks (MOFs) into ordered multidimensional porous superstructures promises the encapsulation of enzymes for heterogeneous biocatalysts. However, the full potential of this approach has been limited by the poor stability of enzymes and the uncontrolled assembly of MOF nanoparticles onto suitable supports. In this study, a novel and exceptionally robust Ni-imidazole-based MOF was synthesized in water at room temperature, enabling in situ enzyme encapsulation. Based on this MOF platform, we developed a DNA-directed assembly strategy to achieve the uniform placement of MOF nanoparticles onto bacterial cellulose nanofibers, resulting in a distinctive "branch-fruit" structure. The resulting hybrid materials demonstrated remarkable versatility across various catalytic systems, accommodating natural enzymes, nanoenzymes, and multienzyme cascades, thus showcasing enormous potential as universal microbioreactors. Furthermore, the hierarchical composites facilitated rapid diffusion of the bulky substrate while maintaining the enzyme stability, with ∼3.5-fold higher relative activity compared to the traditional enzyme@MOF immobilized in bacterial cellulose nanofibers.

Nanoparticle Assembly: From Self-Organization to Controlled Micropatterning for Enhanced Functionalities.

Nanoparticles form long-range micropatterns via self-assembly or directed self-assembly with superior mechanical, electrical, optical, magnetic, chemical, and other functional properties for broad applications, such as structural supports, thermal exchangers, optoelectronics, microelectronics, and robotics. The precisely defined particle assembly at the nanoscale with simultaneously scalable patterning at the microscale is indispensable for enabling functionality and improving the performance of devices. This article provides a comprehensive review of nanoparticle assembly formed primarily via the balance of forces at the nanoscale (e.g., van der Waals, colloidal, capillary, convection, and chemical forces) and nanoparticle-template interactions (e.g., physical confinement, chemical functionalization, additive layer-upon-layer). The review commences with a general overview of nanoparticle self-assembly, with the state-of-the-art literature review and motivation. It subsequently reviews the recent progress in nanoparticle assembly without the presence of surface templates. Manufacturing techniques for surface template fabrication and their influence on nanoparticle assembly efficiency and effectiveness are then explored. The primary focus is the spatial organization and orientational preference of nanoparticles on non-templated and pre-templated surfaces in a controlled manner. Moreover, the article discusses broad applications of micropatterned surfaces, encompassing various fields. Finally, the review concludes with a summary of manufacturing methods, their limitations, and future trends in nanoparticle assembly.

Bubble Printing of Ti3C2TX MXene for Patterning Conductive and Plasmonic Nanostructures.

MXenes represent a novel class of 2D materials with unique properties and have great potential for diverse applications in sensing and electronics; however, their directed assembly at interfaces has not yet been achieved. Herein, the plasmonic heating of MXenes was exploited to achieve the controlled deposition of MXene assemblies via a laser-directed microbubble. The influence of various factors such as solvent composition, substrate surface chemistry, MXene concentration, and laser fluence was investigated, establishing the optimal conditions for rapid patterning with good fidelity. Printed MXene assemblies showed good electrical conductivity and plasmonic sensing capabilities and were able to meet or exceed the state of the art without additional postprocessing steps. This represents the first study of a directed approach for microfabrication using MXenes and lays the foundation for future work in optically directed assembly of MXenes and MXene-based nanocomposites at interfaces toward sensors and devices.

Reconfigurable microbots folded from simple colloidal chains.

To overcome the reversible nature of low-Reynolds-number flow, a variety of biomimetic microrobotic propulsion schemes and devices capable of rapid transport have been developed. However, these approaches have been typically optimized for a specific function or environment and do not have the flexibility that many real organisms exhibit to thrive in complex microenvironments. Here, inspired by adaptable microbes and using a combination of experiment and simulation, we demonstrate that one-dimensional colloidal chains can fold into geometrically complex morphologies, including helices, plectonemes, lassos, and coils, and translate via multiple mechanisms that can be varied with applied magnetic field. With chains of multiblock asymmetry, the propulsion mode can be switched from bulk to surface-enabled, mimicking the swimming of microorganisms such as flagella-rotating bacteria and tail-whipping sperm and the surface-enabled motion of arching and stretching inchworms and sidewinding snakes. We also demonstrate that reconfigurability enables navigation through three-dimensional and narrow channels simulating capillary blood vessels. Our results show that flexible microdevices based on simple chains can transform both shape and motility under varying magnetic fields, a capability we expect will be particularly beneficial in complex in vivo microenvironments.

Versatile, rapid and robust nano-positioning of single-photon emitters by AFM-nanoxerography.

Atomic force microscopy (AFM) nanoxerography was successfully used to direct the assembly of colloidal nanodiamonds (NDs) containing nitrogen-vacancy (NV) centres on electrostatically patterned surfaces. This study reveals that the number of deposited NDs can be controlled by tuning the surface potentials of positively charged dots on a negatively charged background written by AFM in a thin PMMA electret film, yielding assemblies down to a unique single-photon emitter with very good selectivity. The mechanisms of the ND directed assembly are attested by numerical simulations. This robust deterministic nano-positioning of quantum emitters thus offers great opportunities for ultimate applications in nanophotonics for quantum technologies.

Spontaneous Formation of Ordered Magnetic Domains by Patterning Stress.

The formation of ordered magnetic domains in thin films is important for the magnetic microdevices in spin-electronics, magneto-optics, and magnetic microelectromechanical systems. Although inducing anisotropic stress in magnetostrictive materials can achieve the domain assembly, controlling magnetic anisotropy over microscale areas is challenging. In this work, we realized the microscopic patterning of magnetic domains by engineering stress distribution. Deposition of ferromagnetic thin films on nanotrenched polymeric layers induced tensile stress at the interfaces, giving rise to the directional magnetoelastic coupling to form ordered domains spontaneously. By changing the periodicity and shape of nanotrenches, we spatially tuned the geometric configuration of domains by design. Theoretical analysis and micromagnetic characterization confirmed that the local stress distribution by the topographic confinement dominates the forming mechanism of the directed magnetization.

Recent Advances in 3D Printing with Protein-Based Inks.

Three-dimensional (3D) printing is a transformative manufacturing strategy, allowing rapid prototyping, customization, and flexible manipulation of structure-property relationships. Proteins are particularly appealing to formulate inks for 3D printing as they serve as essential structural components of living systems, provide a support presence in and around cells and for tissue functions, and also provide the basis for many essential ex vivo secreted structures in nature. Protein-based inks are beneficial in vivo due to their mechanics, chemical and physical match to the specific tissue, and full degradability, while also to promoting implant-host integration and serving as an interface between technology and biology. Exploiting the biological, chemical, and physical features of protein-based inks can provide key opportunities to meet the needs of tissue engineering and regenerative medicine. Despite these benefits, protein-based inks impose nontrivial challenges to 3D printing such as concentration and rheological features and reconstitution of the structural hierarchy observed in nature that is a source of the robust mechanics and functions of these materials. This review introduces photo-crosslinking mechanisms and rheological principles that underpins a variety of 3D printing techniques. The review also highlights recent advances in the design, development, and biomedical utility of monolithic and composite inks from a range of proteins, including collagen, silk, fibrinogen, and others. One particular focus throughout the review is to introduce unique material characteristics of proteins, including amino acid sequences, molecular assembly, and secondary conformations, which are useful for designing printing inks and for controlling the printed structures. Future perspectives of 3D printing with protein-based inks are also provided to support the promising spectrum of biomedical research accessible to these materials.

Anisotropic Assembly of Nanocrystal/Molecular Hierarchical Superlattices Decoding from Tris-Amide Triarylamines Supramolecular Networks.

Directed assembly of nanocrystals from conventional templates suffers from poor control over the periodicity of the nanocrystal assembly, which is largely due to the fact that the template exists prior to the assembly and is not generally adaptive. Herein, small organic molecules (tris-amide triarylamines, TATA) are demonstrated as conceptual templates from self-assembly through noncovalent interactions. The as-formed supramolecular structures with terminated alkyl chains, resembling the structure of as-synthesized nanocrystals capped with alkyl chains, are able to interact with nanocrystals through van der Waals attractive forces, thereby enabling directed assembly of nanocrystals into ordered superlattices. Specifically, it is found that, as determined by the substituted alkyl chains of TATA, either H or J-aggregates of TATA can be achieved, which eventually produce several distinct supramolecular structures, from rods to spindles, to rings, and to spheres, serving as on-pathway intermediate that directs the assembly of nanocrystals into diverse nanocrystal superlattices. The approach described can be applicable to produce ordered nanocrystal assemblies of a wide range of nanocrystals, independent of size and shape and without ligand exchange process. Strikingly, a helical TATA stacking can direct assembly of binary nanocrystal mixtures into NaZn13 binary superhelix.

Measuring Nanoparticle Polarizability Using Fluorescence Microscopy.

Using a novel method developed to quantify the polarizability of photoluminescent nanoparticles in water, we present experimental observations of the extraordinary polarizability exhibited by nanoparticles of commensurate size with the Debye screening length, confirming previously reported theory. Semiconductor quantum dots (QDs) are ideal model nanoparticles to demonstrate this assay, due to their tunable size and bright photoluminescence. This assay is based upon microfluidic chambers with microelectrodes that generate trapping potentials that are weaker than thermal energy. By comparing the local electric field strength and variations in QD concentration, their polarizability was computed and found to agree with estimates based upon the hydrodynamic diameter found using light scattering. Strikingly, the polarizability of the nanoparticles increased 30-fold in low salt conditions compared to high salt conditions due to the increased thickness of the Debye layer relative to the particle radius. In addition to providing evidence that corroborates theoretical work studying direct solutions to the Poisson-Nernst-Planck equations, these observations provide an explanation for the previously observed conductivity dependence of biomolecule polarizability. As the polarizability of nanoparticles is of high importance to the electrically directed assembly of particles, as well as their interactions with other materials in complex environments, we anticipate that these results will be highly relevant to ongoing efforts in materials by design and nanomedicine.

Stimuli-Responsive DNA-Linked Nanoparticle Arrays as Programmable Surfaces.

Self- and directed-assembly approaches have enabled precise control over the composition and geometry of 2D and 3D nanoparticle constructs. However, the resulting structures are typically static, providing only a single structural arrangement of the nanoparticle building blocks. In this work, the power of DNA-linked nanoparticle assembly is coupled to a grayscale patterning technique to create programmable surfaces for assembly and thermally activated reorganization of gold nanoparticle arrays. Direct grayscale patterning of DNA monolayers by electron-beam lithography (DNA-EBL) enables the production of surfaces with nanometer-scale control over the density of functional DNA. This enables tuning of the particle-surface interactions with single-nanoparticle resolution and without the need for a physical template as employed in most directed assembly methods. This technique is applied on suspended membrane structures to achieve high-resolution assembly of 2D nanoparticle arrays with highly mutable architectures. Gold nanorods assembled on grayscale-patterned surfaces exhibit temperature-dependent configurations and ordering behavior that result in tunable polarization-dependent optical properties. In addition, spherical gold particles assembled from a bimodal suspension produce arrays with temperature-dependent configurations of small and large particles. These results have important implications for the design and fabrication of reconfigurable nanoparticle arrays for application as structurally tunable optical metasurfaces.

Role of Defects in Ion Transport in Block Copolymer Electrolytes.

Ion conducting block copolymers can overcome traditional limitations of homopolymer electrolytes by phase separating into nanoarchitectures that can be simultaneously optimized for two or more orthogonal material properties such as high ionic conductivity and mechanical stability. A key challenge in understanding the ion transport properties of these materials is the difficulty of extracting structure-function relationships without having complete knowledge of all nanoscale transport pathways in bulk samples. Here we demonstrate a method for deriving structure-transport relationships for ion conducting block copolymers using thin films and interdigitated electrodes. Well-defined and directly imaged structure in films of poly(styrene)-block-poly(2-vinylpyridine) is controlled using techniques of directed self-assembly then the poly(2-vinylpyridine) is selectively converted into an ion conductor. The ion conductivity is found to be directly proportional to the total number of connected paths between electrodes and the path length. A single defect such as a dislocation anywhere in the path of an ion conducting route disconnects and precludes that pathway from contributing to the conductivity and results in an increase in the dielectric parameter of the film. When all the ion conduction pathways are blocked between electrodes, the conductivity is negligible, 4 orders of magnitude lower compared to a completely connected morphology and the dielectric parameter increases by a factor of 50. These results have profound implications for the interpretation, design, and processing of block copolymer electrolytes for applications as ion conducting membranes.

Super-Resolution Optical Lithography with DNA.

We developed an efficient, versatile, and accessible super-resolution microscopy method to construct a nanoparticle assembly at a spatial resolution below the optical diffraction limit. The method utilizes DNA and a photoactivated DNA cross-linker. Super-resolution optical techniques have been used only as a means to make measurements below the light diffraction limit. Furthermore, no optical technique is currently available to construct nanoparticle assemblies with a precisely designed shape and internal structure at a resolution of a few tens of nanometers (nm). Here we demonstrate that we can fulfill this deficiency by utilizing spontaneous structural dynamics of DNA hairpins combined with single-molecule fluorescence resonance energy transfer (smFRET) microscopy and a photoactivated DNA cross-linker. The stochastic fluorescence blinking due to the spontaneous folding and unfolding motions of DNA hairpins enables us to precisely localize a folded hairpin and solidify it only when it is within a predesigned target area whose size is below the diffraction limit. As the method is based on an optical microscope and an easily clickable DNA cross-linking reagent, it will provide an efficient means to create large nanoparticle assemblies with a shape and internal structure at an optical super-resolution, opening a wide window of opportunities toward investigating their photophysical and optoelectronic properties and developing novel devices.

Stokes trap for multiplexed particle manipulation and assembly using fluidics.

The ability to confine and manipulate single particles and molecules has revolutionized several fields of science. Hydrodynamic trapping offers an attractive method for particle manipulation in free solution without the need for optical, electric, acoustic, or magnetic fields. Here, we develop and demonstrate the Stokes trap, which is a new method for trapping multiple particles using only fluid flow. We demonstrate simultaneous manipulation of two particles in a simple microfluidic device using model predictive control. We further show that this approach can be used for fluidic-directed assembly of multiple particles in solution. Overall, this technique opens new vistas for fundamental studies of particle-particle interactions and provides a new method for the directed assembly of colloidal particles.

A Bis-Triazacyclononane Tris-Pyridyl N9 -Azacryptand "Beer Can" Receptor for Complexation of Alkali Metal and Lead(II) Cations.

A new bis-triazacyclononane tris-pyridyl N9 -azacryptand ligand is prepared via a convenient one-pot [2+3] condensation reaction between triazacyclononane and 2,6-bis(bromomethyl) pyridine in the presence of M2 CO3 (M=Li, Na, K). The proton, lithium, sodium, potassium and lead(II) complexes of the ligand are characterised in the solid state. Preliminary solution-phase competition experiments indicate that the cryptand ligand preferentially binds lead(II) in the presence of sodium, calcium, potassium and zinc cations in methanol solution.

Electric-field-induced assembly and propulsion of chiral colloidal clusters.

Chiral molecules with opposite handedness exhibit distinct physical, chemical, or biological properties. They pose challenges as well as opportunities in understanding the phase behavior of soft matter, designing enantioselective catalysts, and manufacturing single-handed pharmaceuticals. Microscopic particles, arranged in a chiral configuration, could also exhibit unusual optical, electric, or magnetic responses. Here we report a simple method to assemble achiral building blocks, i.e., the asymmetric colloidal dimers, into a family of chiral clusters. Under alternating current electric fields, two to four lying dimers associate closely with a central standing dimer and form both right- and left-handed clusters on a conducting substrate. The cluster configuration is primarily determined by the induced dipolar interactions between constituent dimers. Our theoretical model reveals that in-plane dipolar repulsion between petals in the cluster favors the achiral configuration, whereas out-of-plane attraction between the central dimer and surrounding petals favors a chiral arrangement. It is the competition between these two interactions that dictates the final configuration. The theoretical chirality phase diagram is found to be in excellent agreement with experimental observations. We further demonstrate that the broken symmetry in chiral clusters induces an unbalanced electrohydrodynamic flow surrounding them. As a result, they rotate in opposite directions according to their handedness. Both the assembly and propulsion mechanisms revealed here can be potentially applied to other types of asymmetric particles. Such kinds of chiral colloids will be useful for fabricating metamaterials, making model systems for both chiral molecules and active matter, or building propellers for microscale transport.

Complexing DNA Origami Frameworks through Sequential Self-Assembly Based on Directed Docking.

Ordered DNA origami arrays have the potential to compartmentalize space into distinct periodic domains that can incorporate a variety of nanoscale objects. Herein, we used the cavities of a preassembled 2D DNA origami framework to incorporate square-shaped DNA origami structures (SQ-origamis). The framework was self-assembled on a lipid bilayer membrane from cross-shaped DNA origami structures (CR-origamis) and subsequently exposed to the SQ-origamis. High-speed AFM revealed the dynamic adsorption/desorption behavior of the SQ-origamis, which resulted in continuous changing of their arrangements in the framework. These dynamic SQ-origamis were trapped in the cavities by increasing the Mg2+ concentration or by introducing sticky-ended cohesions between extended staples, both from the SQ- and CR-origamis, which enabled the directed docking of the SQ-origamis. Our study offers a platform to create supramolecular structures or systems consisting of multiple DNA origami components.

Enhanced Fibrinolysis with Magnetically Powered Colloidal Microwheels.

Thrombi that occlude blood vessels can be resolved with fibrinolytic agents that degrade fibrin, the polymer that forms between and around platelets to provide mechanical stability. Fibrinolysis rates however are often constrained by transport-limited delivery to and penetration of fibrinolytics into the thrombus. Here, these limitations are overcome with colloidal microwheel (µwheel) assemblies functionalized with the fibrinolytic tissue-type plasminogen activator (tPA) that assemble, rotate, translate, and eventually disassemble via applied magnetic fields. These microwheels lead to rapid fibrinolysis by delivering a high local concentration of tPA to induce surface lysis and, by taking advantage of corkscrew motion, mechanically penetrating into fibrin gels and platelet-rich thrombi to initiate bulk degradation. Fibrinolysis of plasma-derived fibrin gels by tPA-microwheels is fivefold faster than with 1 µg mL-1 tPA. µWheels following corkscrew trajectories can also penetrate through 100 µm sized platelet-rich thrombi formed in a microfluidic model of hemostasis in ≈5 min. This unique combination of surface and bulk dissolution mechanisms with mechanical action yields a targeted fibrinolysis strategy that could be significantly faster than approaches relying on diffusion alone, making it well-suited for occlusions in small or penetrating vessels not accessible to catheter-based removal.