Phosphine-Catalyzed 1,2-cis-Diboration of 1,3-Butadiynes.

Trialkyl phosphines PMe3 and PEt3 catalyze the 1,2-cis-diboration of 1,3-butadiynes to give 1,2-diboryl enynes. The products were utilized to synthesize 1,1,2,4-tetraaryl enynes using a Suzuki-Miyaura protocol and can readily undergo proto-deborylation.

Rhodium(I)-Catalyzed Asymmetric Hydroarylative Cyclization of 1,6-Diynes to Access Atropisomerically Labile Chiral Dienes.

Axially chiral open-chained olefins are an underexplored class of atropisomers, whose enantioselective synthesis represents a daunting challenge due to their relatively low racemization barrier. We herein report rhodium(I)-catalyzed hydroarylative cyclization of 1,6-diynes with three distinct classes of arenes, enabling highly enantioselective synthesis of a broad range of axially chiral 1,3-dienes that are conformationally labile (ΔG≠ (rac)=26.6-28.0 kcal/mol). The coupling reactions in each category proceeded with excellent enantioselectivity, regioselectivity, and Z/E selectivity under mild reaction conditions. Computational studies of the coupling of quinoline N-oxide system reveal that the reaction proceeds via initial oxidative cyclization of the 1,6-diyne to give a rhodacyclic intermediate, followed by σ-bond metathesis between the arene C-H bond and the Rh-C(vinyl) bond, with subsequent C-C reductive elimination being enantio-determining and turnover-limiting. The DFT-established mechanism is consistent with the experimental studies. The coupled products of quinoline N-oxides undergo facile visible light-induced intramolecular oxygen-atom transfer, affording chiral epoxides with complete axial-to-central chirality transfer.

Gold-Catalyzed Diyne-Ene Annulation for the Synthesis of Polysubstituted Benzenes through Formal [3+3] Approach with Amide as the Critical Co-Catalyst.

The one-step synthesis of tetra-substituted benzenes was accomplished via gold-catalyzed diyne-ene annulation. Distinguished from prior modification methods, this novel strategy undergoes formal [3+3] cyclization, producing polysubstituted benzenes with exceptional efficiency. The critical factor enabling this transformation was the introduction of amides, which were reported for the first time in gold catalysis as covalent nucleophilic co-catalysts. This interesting protocol not only offers a new strategy to achieve functional benzenes with high efficiency, but also enlightens potential new reaction pathways within gold-catalyzed alkyne activation processes.

Gold-Catalyzed Amine Cascade Addition to Diyne-Ene: Enantioselective Synthesis of 1,2-Dihydropyridines.

With the well-documented chemical and biological applications, piperidine and pyridine are among the most important N-heterocycles, and a new synthetic strategy, especially one with an alternative bond-forming design, is of general interest. Using the gold-catalyzed intermolecular condensation of amine and diyne-ene, we report herein the first example of enantioselective 1,2-dihydropyridine synthesis through a formal [3+2+1] fashion (up to 95 % yield, up to 99 % e.e.).

One-Pot Dual C-C Coupling Reaction via Site Selective Cascade Formation by PdII -Cryptate of an Amino-Ether Heteroditopic Macrobicycle.

Selectivity of aryl iodo over ethynyl iodo toward the Suzuki cross coupling reaction is explored by utilizing a palladium complex of amino-ether heteroditopic macrobicycle. Subsequently, unreacted ethynyl iodide undergoes homocoupling reaction in the same catalytic atmosphere, thereby representing a cascade dual C-C coupling reaction. Furthermore, this approach is extended for novel one-pot synthesis of unsymmetrical 1,3-diynes.

Total Synthesis of Dictyodendrins A-F by the Gold-Catalyzed Cascade Cyclization of Conjugated Diyne with Pyrrole.

The total synthesis of dictyodendrins A-F was achieved by using the gold(I)-catalyzed annulation of a conjugated diyne with N-Boc-pyrrole for direct construction of the pyrrolo[2,3-c]carbazole scaffold. Late-stage functionalization of the resulting pyrrolo[2,3-c]carbazole to introduce various substituents provided divergent access to dictyodendrins. Some dictyodendrin analogues exhibited inhibitory activities toward CDK2/CycA2 and GSK3.

Cyclization of Ynamide-Tethered 1,3,8-Triynes.

A facile thermal cyclization of ynamide-tethered 1,3,8-triynes to form a 3,5,6,7-tetrahydro-1H-pyrano[3,4-c]pyridine skeleton is described. Although the mechanism of this unusual reaction has yet to be defined, the formation of either a strained keteniminium or a biradical intermediate followed by a 1,5-hydride or -hydrogen shift is tentatively proposed as the key elementary steps in the reaction sequence. Appropriate electronic activation at the carbon center donating a hydride or hydrogen is crucial for successful cyclization.

Identification of dialkyl diacetylene diols with potent cancer chemopreventive activity.

An increasing importance of chemoprevention for controlling cancer risks prompted the discovery of new active cancer chemopreventive agents. In this study, we designed and synthesized substituted hexa-2,4-diyne-1,6-diols, more structurally simplified, tunable, and easily preparable than natural gymnasterkoreaynes, and evaluated their cancer chemopreventive activities by measuring concentration of doubling quinone reductase activity (CD), cell viability, and chemopreventive index (CI). Most of the diols exhibited good CD activity and low cytotoxicity. In particular, tetradeca-5,7-diyne-4,9-diol and 2-methyltetradeca-5,7-diyne-4,9-diol showed the best cancer chemopreventive activity, approximately equipotent to that of sulforaphane. And, by synthesizing optically active stereoisomers of selected active compounds, the effect of stereochemistry was also studied. Eventually, we produced a chemopreventive compound for in vivo study.

Diyne inactivators and activity-based fluorescent labeling of phenol hydroxylase in Pseudomonas sp. CF600.

An activity-based labeling (ABL) approach was investigated for the phenol-oxidizing bacterium, Pseudomonas sp. CF600. Phenol-grown cells were exposed to several different terminal diynes, and following cell breakage, extracts of these cells were added to copper-catalyzed alkyne/azide cycloaddition reactions containing Alexa Fluor 647 azide. Analysis of total cell proteins by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and near-infrared scanning demonstrated covalent fluorescent labeling of a 58- and a 34-kDa polypeptide in all diyne-treated cell types. Further studies using 1,4-diethynylbenzene (DEB) demonstrated that these labeled polypeptides were consistently detected in cells grown on substrates that exhibited phenol-dependent O2 uptake activity but not observed when cells were grown on substrates such as dextrose or catechol that did not support this activity. Fluorescent labeling of the two polypeptides in DEB-treated, phenol-grown cells was time dependent and was inhibited by several known substrates for phenol hydroxylase. These results suggest that diverse diynes act as mechanism-based inactivators of phenol hydroxylase in Pseudomonas sp. CF600 and that this effect can be exploited by ABL approaches to selectively label the major 58- and 34-kDa subunits of the hydroxylase component of this complex enzyme.

Synthesis, crystal structure, Hirshfeld surface analysis and DFT study of the 1,1'-(buta-1,3-diyne-1,4-di-yl)bis-(cyclo-hexan-1-ol).

The title compound, C16H22O2, was synthesized in order to obtain its guest-free form because 'wheel-and-axle'-shaped mol-ecules tend to crystallize from solutions as solvates or host-guest mol-ecules. It crystallizes in the monoclinic space group P2/c with two crystallographically non-equivalent mol-ecules, one situated on an inversion center and the other on a twofold axis. The rod-like 1,3-diyne fragments have the usual linear geometry. In the crystal, O-H ⋯ O bonds form eight-membered rings of the R 4 4(8) type, linking mol-ecules into layers. The Hirshfeld surface analysis indicates that the largest con-tributions are from inter-molecular H⋯H (ca 71%) and H⋯C/C⋯H (ca 19%) contacts. The energies of the frontier mol-ecular orbitals were determined by DFT calculations at the B3LYP/def2-TZVP level of theory.

Toward Long-Term-Dispersible, Metal-Free Single-Chain Nanoparticles.

We report herein on a new platform for synthesizing stable, inert, and dispersible metal-free single-chain nanoparticles (SCNPs) via intramolecular metal-traceless azide-alkyne click chemistry. It is well known that SCNPs synthesized via Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) often experience metal-induced aggregation issues during storage. Moreover, the presence of metal traces limits its use in a number of potential applications. To address these problems, we selected a bifunctional cross-linker molecule, sym-dibenzo-1,5-cyclooctadiene-3,7-diyne (DIBOD). DIBOD has two highly strained alkyne bonds that allow for the synthesis of metal-free SCNPs. We demonstrate the utility of this new approach by synthesizing metal-free polystyrene (PS)-SCNPs without significant aggregation issues during storage, as demonstrated by small-angle X-ray scattering (SAXS) experiments. Notably, this method paves the way for the synthesis of long-term-dispersible, metal-free SCNPs from potentially any polymer precursor decorated with azide functional groups.

Synthesis of a novel chemotype via sequential metal-catalyzed cycloisomerizations.

Sequential cycloisomerizations of diynyl o-benzaldehyde substrates to access novel polycyclic cyclopropanes are reported. The reaction sequence involves initial Cu(I)-mediated cycloisomerization/nucleophilic addition to an isochromene followed by diastereoselective Pt(II)-catalyzed enyne cycloisomerization.

Highly stereocontrolled synthesis of trans-enediynes via carbocupration of fluoroalkylated diynes.

Treatment of readily prepared (Z)-6-benzyloxy-1,1,1,2-tetrafluoro-6-methyl-2-hepten-4-yne with 1.5 equiv of LHMDS in -78 °C for 1 h gave the corresponding trifluoromethylated diyne in an excellent yield. This diyne was found to be a good substrate for the carbocupration with various higher-ordered cyanocuprates to give the corresponding vinylcuprates in a highly regio- and stereoselective manner. The in situ generated vinylcuprates could react very smoothly with an excess amount of iodine, the vinyl iodides being obtained in high yields. Thus-obtained iodides underwent a very smooth Sonogashira cross-coupling reaction to afford various trans-enediynes in high yields.

Effects of Structural Variations on Antibacterial Properties for Conjugated Diynes Generated through Glaser Hay Couplings.

Antibiotic resistance is a growing problem facing global societies today. Many new antibiotics are derivatized versions of already existing antibiotics, which allows for antibiotic resistance to arise. To combat this issue, new antibiotics with different core structures need to be elucidated. Asymmetrical polyacetylenes have been isolated from natural products and they have previously been demonstrated to exhibit antimicrobial and antibacterial activity; however, their synthetic preparation has not made them easily amenable to rapid derivatization for SAR studies. Using a combination of solution and solid-supported chemistries, an array of diynes inspired by a known natural product were prepared and assessed for antibacterial activity. Ultimately, several compounds were identified with improved activity in bacterial viability assays. Moreover, some compounds were discovered that displayed a degree of specificity for E. coli over P. fluorescens and vice versa. These new compounds show promise, and further investigation is needed to pinpoint the specific structural components that elicit biological activity.

Chemoselective On-surface Homocoupling of Terminal Alkynes Catalyzed by Exogenous Cupric Ions.

The on-surface coupling reactions of terminal alkynes catalyzed by exogenous cupric ions on chemically inert highly oriented pyrolytic graphite (HOPG) surface have been investigated by scanning tunnelling microscopy. In the presence of exogenous cupric ions, diyne-linked nanostructures generated via homocoupling of terminal alkynes are the exclusive products, whereas no coupling reaction occurs for the terminal alkynes on the surface in the absence of the cupric ions, suggesting that exogenous cupric ions are efficient to catalyze the highly chemoselective on-surface reaction of terminal alkynes. The HOPG surface displays a template effect to the growth and alignment of the products on the surface. As a result, 2D arrays of diyne-linked zigzag polymers and 2D diyne-linked porous polymers are fabricated from ditopic monomer 3,6-diethynylcarbazole and tritopic monomer 1,3,5-tris-(4-ethynylphenyl) benzene, respectively. This synthetic strategy combining the high selectivity of cupric ion catalyst as well as the template effect of on-surface synthesis approach could be a general strategy to fabricate diyne-linked nanostructures and nanomaterials on solid surfaces.

Facile Fabrication of the Cu-N-C Catalyst with Atomically Dispersed Unsaturated Cu-N2 Active Sites for Highly Efficient and Selective Glaser-Hay Coupling.

M-N-C catalysts have attracted considerable attention in the fields of energy storage and conversion as well as catalysis over the past decades. However, the current synthetic strategies for fabricating M-N-C catalysts via high-temperature pyrolysis unavoidably lead to a structural heterogeneity with the presence of a mixture of species including atomically dispersed M-Nx moieties and inorganic metal-containing particles, which not only decreases the atomic utilization but also clouds the accurate understanding of the nature of the catalytically active sites. Herein, we first report a straightforward and cost-effective preparation strategy for fabricating a Cu-N-C catalyst with atomically dispersed and coordinately unsaturated Cu-N2 moieties on hierarchically N-doped porous carbon (Cu1/NC-800) without formation of any metal-containing phases. Cu1/NC-800 exhibits outstanding catalytic performance for Glaser-Hay coupling of terminal alkynes under mild and sustainable conditions, which surpass those of the state-of-the-art catalysts. A broad set of (un)symmetrical aryl-aryl, aryl-alkyl, and alkyl-alkyl 1,3-diynes were selectively synthesized in high yields with good tolerance of various functional groups. More importantly, the Cu1/NC-800 could be easily reused with good maintenance of the activity and atomic dispersion of Cu in the structure. Experimental results and theoretical calculations reveal that the low N coordination number of single-atom Cu sites in Cu-N2 exhibit a preferential adsorption to terminal alkyne; meanwhile, the adjacent pyridinic N sites on the carbon matrix facilitate the deprotonation of the adsorbed alkyne to generate the key intermediate Cuδ-acetylide species, thus synergistically boosting the reaction. Therefore, this work not only provides an alternative facile synthetic strategy for fabricating atomically dispersed M-N-C catalysts but also represents a significant advance for accessing (un)symmetrical 1,3-diynes from Glaser-Hay coupling.

Application of Glaser-Hay Diyne Coupling To Constrain Nα-Amino Acid Amides via a N-N Bridge.

We present the application of a Glaser-Hay diyne coupling for the synthesis of conformationally constrained Nα-amino acid amides with different diyne ring sizes. Twelve-membered rings were the smallest rings that could be prepared by this approach. We observed the formation of triethylammonium adducts in the cases of smaller (10- and 11-membered) rings. Calculation of the conformational barriers for the cyclization reactions of various ring sizes demonstrated that the formation of amino acid-derived smaller rings by this reaction is thermodynamically unfavorable.

Partially Polymerized Phospholipid Vesicles for Efficient Delivery of Macromolecules.

Lipid-based vesicles, namely cationic liposomal nanocarriers have been recognized early on as one of the most attractive delivery systems for RNA, protein, and oligonucleotides. Despite several advantages of conventional liposomal carriers for therapeutic macromolecules, their flexible and unsupported bilayered membranes can pose some limitations for efficient intracellular delivery of their sensitive cargos. Hence, polymerized liposomes, a concept conceived about 20 years ago, might offer structural solution to current in vivo efficiency concerns affecting traditional cationic phospholipid vectors, especially when adapted to enable superior loading and stability, typically required for effective intracellular delivery of proteins and polynucleotides.Our recent approach attempted to remodel polymerized liposomal vesicles-specifically their semi-rigid membrane structure-to create block-polymerized bilayered vesicles (generally composed of DOTAP: DOPE: Diyne PC in 0.1:1:1 molar ratio). Adopting a modified freeze-dry-rehydration technique allowed modular reassembly of such partially polymerized lipidic vesicles (PPL). Different prototype cationic partially polymerized liposomal preparations (PPLs) were successfully developed (mean particle size range 150-300 nm), demonstrating enhanced physicochemical stability and loading capacity, thus promoting improved intracellular delivery of model RNAi and protein cargos.

Anti-hepatitis B virus effects of the traditional Chinese herb Artemisia capillaris and its active enynes.

ETHNOPHARMACOLOGICAL RELEVANCE: Artemisia capillaris (Yin-Chen) is a famous traditional Chinese medicine (TCM) for treating acute and chronic hepatitis in China. Enynes are one type of characteristic constituents in this herb, while their anti-hepatitis B virus (anti-HBV) properties have not been systemically investigated. AIM OF THE STUDY: This study is to reveal the active part of A. capillaris, and systemically investigate the enynes and their anti-HBV activity. MATERIALS AND METHODS: The total extract and each fraction of A. capillaris were assayed for the anti-HBV activity to reveal the active part. Bioassay-guided fractionation using various chromatographic techniques yielded the enynes, whose structures were elucidated by spectroscopic analyses and ECD calculations. The anti-HBV properties inhibiting HBsAg and HBeAg secretions and HBV DNA replication were evaluated on HepG 2.2.15 cell line in vitro. RESULTS: ACT-2 and ACT-3 was revealed to be the respective active and toxic part of A. capillaris. Twelve enynes (1-12) involving four new ones (1-4) and two unusual enyne analogs (13-14) were isolated from the active part (ACT-2). All the isolates were assayed for their anti-HBV activity, and the preliminary structure-activity relationships were summarized based on the structural features. In particular, compound 4 could significantly inhibit the secretions of HBsAg and HBeAg, and HBV DNA replication with IC50 values of 197.2 (SI > 5.1), 48.7 (SI > 20.5) and 9.8 (SI > 102) µM. CONCLUSIONS: Enynes are responsible for the anti-HBV effects of A. capillaris. Hydroxyl and glycosyl groups are preferable for maintaining activity. This is the first time to systematically investigate the anti-HBV activity of enynes in A. capillaris, which provides valuable information for understanding the ethnopharmacological application of Yin-Chen.

The traditional uses, phytochemistry, and pharmacology of Atractylodes macrocephala Koidz.: A review.

ETHNOPHARMACOLOGICAL RELEVANCE: Atractylodes macrocephala Koidz. (called Baizhu in China) is a medicinal plant that has long been used as a tonic agent in various ethno-medical systems in East Asia, especially in China, for the treatment of gastrointestinal dysfunction, cancer, osteoporosis, obesity, and fetal irritability. AIM OF THE REVIEW: This review aims to provide a systematic summary on the botany, traditional uses, phytochemistry, pharmacology, pharmacokinetics, and toxicology of A. macrocephala to explore the future therapeutic potential and scientific potential of this plant. MATERIALS AND METHODS: A literature search was performed on A. macrocephala using scientific databases including Web of Science, Google Scholar, Baidu Scholar, Springer, PubMed, SciFinder, and ScienceDirect. Information was also collected from classic books of Chinese herbal medicine, Ph.D. and M.Sc. dissertations, unpublished materials, and local conference papers on toxicology. Plant taxonomy was confirmed to the database "The Plant List" (www.theplantlist.org). RESULTS: More than 79 chemical compounds have been isolated from A. macrocephala, including sesquiterpenoids, triterpenoids, polyacetylenes, coumarins, phenylpropanoids, flavonoids and flavonoid glycosides, steroids, benzoquinones, and polysaccharides. Crude extracts and pure compounds of A. macrocephala are used to treat gastrointestinal hypofunction, cancer, arthritis, osteoporosis, splenic asthenia, abnormal fetal movement, Alzheimer disease, and obesity. These extracts have various pharmacological effects, including anti-tumor activity, anti-inflammatory activity, anti-aging activity, anti-oxidative activity, anti-osteoporotic activity, neuroprotective activity, and immunomodulatory activity, as well as improving gastrointestinal function and gonadal hormone regulation. CONCLUSIONS: A. macrocephala is a valuable traditional Chinese medicinal herb with multiple pharmacological activities. Pharmacological investigations support the traditional use of A. macrocephala, and may validate the folk medicinal use of A. macrocephala to treat many chronic diseases. The available literature shows that much of the activity of A. macrocephala can be attributed to sesquiterpenoids, polysaccharides and polyacetylenes. However, there is a need to further understand the molecular mechanisms and the structure-function relationship of these constituents, as well as their potential synergistic and antagonistic effects. Further research on the comprehensive evaluation of medicinal quality, the understanding of multi-target network pharmacology of A. macrocephala, as well as its long-term in vivo toxicity and clinical efficacy is recommended.